3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050” Straddlemount Plug - Shielded 101 Series
Wiper-on-wiper contact for reliable repetitive •
plugging
Solder tails require no special tooling•
Contacts: 26, 50, 68, and 100•
See Regulatory Information Appendix (RIA) for •
chemical compliance information
Date Modied: August 26, 2008 TS-0698-C
Sheet 1 of 2
Physical
Insulation Materiel: Glass Reinforced Polyester (PCT) - Body
Glass Reinforced Polyester (LCP) - Insert Mold
Flammability: UL 94V-0
Color: Black
Contact Material: Copper Alloy
Underplating: 80 μ” [ 2.0 μm ] Nickel
Wiping Area Plating: See Ordering Information
Solder Tail Plating: Gold flash over Nickel (RIA E1 & C1 apply)
Body Material: Zinc Alloy
Plating: Nickel
Shroud:
Material: Steel
Plating: Nickel
Marking: 3M Logo & Part Number
Electrical
Current Rating: 1 A
Insulation Resistance: > 5 x 108 Ω at 500 VDC
Withstanding Voltage: 500 VRMS for 1 minute
Environmental
Temperature Rating: -20 °C to +85 °C
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Connectors
.050” Straddlemount Plug - Shielded 101 Series
TS-0698-C
Sheet 2 of 2
Ordering Information
101XX - 900APX
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for
Reference Only
Wiping Contact Plating:
L = 8 μ” [0.2 μm] min. Gold (RIA E1 & C1 apply)
C = 30 μ” [0.76 μm] min. Gold (RIA E1 & C1 apply)
Compatible Board Thickness
A = 1.0 mm standard
(0 = 1.6 mm special order)
Contact Quantity
(See Table)
Note:
A0 = 100
Positions Dimensions
ABCD
26 0.84 [ 21.4 ] 0.60 [ 15.2 ] 1.02 [ 25.8 ] 0.68 [ 17.2 ]
50 1.44 [ 36.6 ] 1.20 [ 30.5 ] 1.62 [ 41.1 ] 1.27 [ 32.3 ]
68 1.89 [ 48.1 ] 1.65 [ 41.9 ] 2.70 [ 52.5 ] 1.72 [ 43.7 ]
100 2.66 [ 67.5 ] 2.45 [ 62.2 ] 2.87 [ 72.8 ] 2.52 [ 64.0 ]
.025
[ 0.64 ] .15
[ 3.7 ]
Position 1
Position
.024
[ 0.60 ]
.65
[16.4 ] .50
[ 12.7 ]
.050 ± .003
[ 1.27 ]
Position 1
Position 2
.025
[ 0.64 ]
Last Position
.15
[ 3.7 ]
B
A
.36
[ 9.1 ]
.30
[ 7.5 ]
C
Position 1
15°
Position
Last Position
Position 2
B
D
.050 p .002
[1.27]
.030 p .002
[0.76]
.220
[5.59]
.120
[3.09]
Typical
Board
Layout
Solder pad
pattern repeated
on both sides of
board.
C
