SURFACE MOUNT DISPLAY Part Number: ACSA04-41SURKWA-F01 Hyper Red Features Description z 0.4 inch digit height. The Hyper Red source color devices are made with Al- z Low current operation. GaInP on GaAs substrate Light Emitting Diode. z Excellent character appearance. z Mechanically rugged. z Gray face,white segment. z Package:400pcs/ reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG0285 REV NO: V.7 DATE: MAR/22/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000376 Selection Guide Part No. Dice ACSA04-41SURKWA-F01 Iv (ucd) [1] @ 10mA Lens Type Hyper Red (AlGaInP) White Diffused Description Min. Typ. 14000 27000 Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 nm IF=20mA Hyper Red 630 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG0285 REV NO: V.7 DATE: MAR/22/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000376 Hyper Red ACSA04-41SURKWA-F01 SPEC NO: DSAG0285 REV NO: V.7 DATE: MAR/22/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000376 ACSA04-41SURKWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG0285 REV NO: V.7 DATE: MAR/22/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000376 PACKING & LABEL SPECIFICATIONS ACSA04-41SURKWA-F01 SPEC NO: DSAG0285 REV NO: V.7 DATE: MAR/22/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000376