VSMG2700 Vishay Semiconductors High Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero FEATURES * Package type: surface mount * Package form: PLCC-2 * Dimensions (L x W x H in mm): 3.5 x 2.8 x 1.75 * Peak wavelength: p = 830 nm * High reliability * High radiant power 94 8553 * High radiant intensity * Angle of half intensity: = 60 * Low forward voltage * Suitable for high pulse current operation DESCRIPTION * High modulation band width: fc = 18 MHz VSMG2700 is an infrared, 830 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded in a PLCC-2 package for surface mounting (SMD). * Good spectral matching with Si photodetectors * Floor life: 168 h, MSL 3, acc. J-STD-020 * Lead (Pb)-free reflow soldering * AEC-Q101 qualified * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC * Find out more about Vishay's Automotive Grade Product requirements at: www.vishay.com/applications APPLICATIONS * Infrared radiation source for operation with CMOS cameras (illumination) * High speed IR data transmission PRODUCT SUMMARY COMPONENT Ie (mW/sr) (deg) p (nm) tr (ns) 10 60 830 20 VSMG2700 Note Test conditions see table "Basic Characteristics" ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VSMG2700-GS08 Tape and reel MOQ: 7500 pcs, 1500 pcs/reel PLCC-2 VSMG2700-GS18 Tape and reel MOQ: 8000 pcs, 8000 pcs/reel PLCC-2 Note MOQ: minimum order quantity ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 Document Number: 81472 Rev. 1.3, 03-Nov-09 For technical questions, contact: emittertechsupport@vishay.com www.vishay.com 307 VSMG2700 Vishay Semiconductors High Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage VR 5 V Forward current IF 100 mA mA Peak forward current tp/T = 0.5, tp = 100 s IFM 200 Surge forward current tp = 100 s IFSM 1 A PV 180 mW C Power dissipation Junction temperature Tj 100 Operating temperature range Tamb - 40 to + 85 C Storage temperature range Tstg - 40 to + 100 C Acc. figure 8, J-STD-020 Tsd 260 C J-STD-051, soldered on PCB RthJA 250 K/W Soldering temperature Thermal resistance junction/ambient Note Tamb = 25 C, unless otherwise specified 200 120 IF - Forward Current (mA) PV - Power Dissipation (mW) 180 160 140 120 100 RthJA = 250 K/W 80 60 40 100 80 60 RthJA = 250 K/W 40 20 20 0 0 0 10 21339 20 30 40 50 60 70 80 90 100 0 Tamb - Ambient Temperature (C) 10 Fig. 1 - Power Dissipation Limit vs. Ambient Temperature 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (C) 21340 Fig. 2 - Forward Current Limit vs. Ambient Temperature BASIC CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL TYP. MAX. IF = 100 mA, tp = 20 ms VF 1.5 1.8 IF = 1 A, tp = 100 s VF 2.3 Temperature coefficient of VF IF = 1 mA TKVF - 1.8 Reverse current VR = 5 V IR VR = 0 V, f = 1 MHz, E = 0 Cj IF = 100 mA, tp = 20 ms Ie Forward voltage Junction capacitance Radiant intensity Radiant power Temperature coefficient of e MIN. 10 V V mV/K 10 A 22 mW/sr 125 6 UNIT pF IF = 1 A, tp = 100 s Ie 100 IF = 100 mA, tp = 20 ms e 40 mW IF = 100 mA TKe - 0.35 %/K 60 deg Angle of half intensity mW/sr Peak wavelength IF = 100 mA p 830 nm Spectral bandwidth IF = 100 mA 40 nm Temperature coefficient of p IF = 100 mA TKp 0.25 nm/K Rise time IF = 100 mA tr 20 ns Fall time IF = 100 mA tf 20 ns IDC = 70 mA, IAC = 30 mA pp fc 18 MHz d 0.44 mm Cut-off frequency Virtual source diameter Note Tamb = 25 C, unless otherwise specified www.vishay.com 308 For technical questions, contact: emittertechsupport@vishay.com Document Number: 81472 Rev. 1.3, 03-Nov-09 VSMG2700 High Speed Infrared Emitting Diode, Vishay Semiconductors 830 nm, GaAlAs Double Hetero BASIC CHARACTERISTICS Tamb = 25 C, unless otherwise specified 1.25 10 000 0.01 1000 0.02 0.05 100 0.2 0.5 DC 0.1 10 1 0.01 0.1 1 0.75 0.5 0.25 0 740 100 10 tp - Pulse Length (ms) 95 9985 1.0 900 800 - Wavelength (nm) 16972_1 Fig. 6 - Relative Radiant Power vs. Wavelength Fig. 3 - Pulse Forward Current vs. Pulse Duration 0 10 20 30 Ie, rel - Relative Radiant Intensity IF - Forward Current (mA) 1000 100 tp = 100 s tp/T = 0.001 10 40 1.0 0.9 50 0.8 60 70 0.7 - Angular Displacement IF - Forward Current (mA) tp/T = 0.005 e, rel - Relative Radiant Power Tamb < 60 C 80 1 0 1 2 3 0.6 4 0.4 0.2 0 94 8013 VF - Forward Voltage (V) 18873_1 Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Radiant Intensity vs. Angular Displacement Ie - Radiant Intensity (mW/sr) 100 10 tp = 1 s 1 0.1 1 18874 10 100 1000 IF - Forward Pulse Current (mA) Fig. 5 - Radiant Intensity vs. Forward Current Document Number: 81472 Rev. 1.3, 03-Nov-09 For technical questions, contact: emittertechsupport@vishay.com www.vishay.com 309 VSMG2700 Vishay Semiconductors High Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero PACKAGE DIMENSIONS in millimeters technical drawings according to DIN specifications 0.9 1.75 0.1 3.5 0.2 Pin identification Mounting Pad Layout 4 A area covered with solder resist 2.6 (2.8) C 2.2 2.8 0.15 1.2 4 1.6 (1.9) O 2.4 3 + 0.15 Drawing-No.: 6.541-5067.01-4 Issue: 5; 04.11.08 20541 SOLDER PROFILE DRYPACK 300 Temperature (C) max. 260 C 245 C 255 C 240 C 217 C 250 FLOOR LIFE 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp up 3 C/s max. ramp down 6 C/s 50 Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 168 h Conditions: Tamb < 30 C, RH < 60 % Moisture sensitivity level 3, acc. to J-STD-020. DRYING 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 8 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020 www.vishay.com 310 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 C (+ 5 C), RH < 5 %. For technical questions, contact: emittertechsupport@vishay.com Document Number: 81472 Rev. 1.3, 03-Nov-09 VSMG2700 High Speed Infrared Emitting Diode, Vishay Semiconductors 830 nm, GaAlAs Double Hetero TAPE AND REEL PLCC-2 components are packed in antistatic blister tape (DIN IEC (CO) 564) for automatic component insertion. Cavities of blister tape are covered with adhesive tape. 10.0 9.0 120 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 94 8670 Fig. 9 - Blister Tape 3.5 3.1 63.5 60.5 14.4 max. 180 178 94 8665 Fig. 12 - Dimensions of Reel-GS08 2.2 2.0 10.4 8.4 120 5.75 5.25 3.6 3.4 4.0 3.6 4.5 3.5 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 4.1 3.9 13.00 12.75 2.5 1.5 Identification Label: Vishay type group tape code production code quantity 0.25 2.05 1.95 94 8668 Fig. 10 - Tape Dimensions in mm for PLCC-2 MISSING DEVICES A maximum of 0.5 % of the total number of components per reel may be missing, exclusively missing components at the beginning and at the end of the reel. A maximum of three consecutive components may be missing, provided this gap is followed by six consecutive components. De-reeling direction 94 8158 62.5 60.0 321 329 14.4 max. 18857 Fig. 13 - Dimensions of Reel-GS18 COVER TAPE REMOVAL FORCE The removal force lies between 0.1 N and 1.0 N at a removal speed of 5 mm/s. In order to prevent components from popping out of the blisters, the cover tape must be pulled off at an angle of 180 with regard to the feed direction. > 160 mm Tape leader 40 empty compartments min. 75 empty compartments Carrier leader Carrier trailer Fig. 11 - Beginning and End of Reel The tape leader is at least 160 mm and is followed by a carrier tape leader with at least 40 empty compartments. The tape leader may include the carrier tape as long as the cover tape is not connected to the carrier tape. The least component is followed by a carrier tape trailer with a least 75 empty compartments and sealed with cover tape. Document Number: 81472 Rev. 1.3, 03-Nov-09 For technical questions, contact: emittertechsupport@vishay.com www.vishay.com 311 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000