SURFACE MOUNT DISPLAY P/N: ACSA03-41EWA-F01 HIGH EFFICIENCY RED Description Features 0.3 INCH DIGIT HEIGHT. The High Efficiency Red source color devices are made with LOW CURRENT OPERATION. Gallium Arsenide Phosphide on Gallium Phosphide Orange EXCELLENT CHARACTER APPEARANCE. Light Emitting Diode. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG0569 REV NO: V.1 DATE: DEC/26/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000391 Selection Guide Part No. Dice ACSA03-41EWA-F01 Iv (ucd) @ 10mA Lens Type HIGH EFFICIENCY RED(GaAsP/GaP) WHITE DIFFUSED Description Min. Typ. 1200 4210 Common Anode, Rt. Hand Decimal. Units Test Conditions Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. peak Peak Wavelength High Efficiency Red 627 nm IF=20mA D Dominant Wavelength High Efficiency Red 625 nm IF=20mA 1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG0569 REV NO: V.1 DATE: DEC/26/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000391 High Efficiency Red ACSA03-41EWA-F01 SPEC NO: DSAG0569 REV NO: V.1 DATE: DEC/26/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000391 ACSA03-41EWA-F01 Recommended Soldering Pattern (Units : mm) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG0569 REV NO: V.1 DATE: DEC/26/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000391 PACKING & LABEL SPECIFICATIONS ACSA03-41EWA-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAG0569 REV NO: V.1 DATE: DEC/26/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000391