G3PB-225B-2N-VDDC12-24V - Omron Electronics

Industrial 3--Phase Solid State Relay G3PB

HA comprehensive lineup that now includes

480-VAC models

HUsed to switch electrical loads including

Omron’s temperature coltrollers

HNo audible noise; EMI (Electro-Magnetic

Interference) and vibration resistant

HImproved heat sink increases life and

reliability

HVoltage turn-on at zero crossing reduces

initial inrush load currents

HLED indicator turns on when control power

is applied

HDIN rail or panel mountable

Ordering Information

Input operating voltage

(Rated voltage)

Operating load voltage

(Rated load voltage)

Max. inrush current

(60Hz, 1 cycle)

Max. load current Part number

9.6to30VDC

(

)

75 to 264 VAC

(

)

150A 15 amps G3PB-215B-3N-VD DC12--24V

(12to24VDC) (100 to 240 VAC)

G3PB-215B-2N-VD DC12--24V

220A 25 amps G3PB-225B-3N-VD DC12--24V

G3PB-225B-2N-VD DC12--24V

440A 35 amps G3PB-235B-3N-VD DC12--24V

G3PB-235B-2N-VD DC12--24V

45 amps G3PB-245B-3N-VD DC12--24V

G3PB-245B-2N-VD DC12--24V

180 to 528 VAC

(

)

220A 15 amps G3PB-515B-3N-VD DC12--24V

(200 to 480 VAC)

G3PB-515B-2N-VD DC12--24V

25 amps G3PB-525B-3N-VD DC12--24V

G3PB-525B-2N-VD DC12--24V

440A 35 amps G3PB-535B-3N-VD DC12--24V

G3PB-535B-2N-VD DC12--24V

45 amps G3PB-545B-3N-VD DC12--24V

G3PB-545B-2N-VD DC12--24V

Note: 1. All models have zero cross function.

2. Number of poles indicated by --2N (for two poles) or --3N (for three poles) in part number.

JAccessories

DIN Rail Mounting Track

Description Part number

DIN rail track, 7.3 mm (0.29 in) depth; 50 cm (1.64 ft) length PFP-50N

DIN rail track, 7.3 mm (0.29 in) depth; 1 m (3.28 ft) length PFP-100N

End plate PFP-M

Spacer PFP-S

G3PBG3PB

Application Example

Load

Heater

Power supply

for load

Direct connection possible

Temperature Controller

Voltage output

terminal

(for driving SSR)

SSR

Input Output

Omron’s SSRs offer these advantages over electro-mechanical relays (EMRs):

DLonger service life with no contacts to wear out

DReduced electromagnetic interference

DFaster response time

DVibration and shock resistance

DNo audible noise when switching

DEnhanced reliability

Specifications

JRatings (at an Ambient Temperature of 25°C)

Operating Circuit (Common)

Item Common

Rated operating voltage 12 to 24 VDC

Operating voltage range 9.6to30VDC

Rated input current (Impedance) 10 mA max. (at 24 VDC)

Must-operate voltage 9.6 VDC max.

Reset voltage 1VDCmin.

Insulation method Phototriac coupler

Operation indicator Yellow LED

Output

Item G3PB-

215B-

3N-VD

G3PB-

215B-

2N-VD

G3PB-

225B-

3N-VD

G3PB-

225B-

2N-VD

G3PB-

235B-

3N-VD

G3PB-

235B-

2N-VD

G3PB-

245B-

3N-VD

G3PB-

245B-

2N-VD

Rated voltage 100 to 240 VAC

Operating voltage range 75 to 264 VAC

Rated carry current

(see note)

15 A 25 A 35 A 45 A

Minimum load current 0.2 A 0.5 A

Inrush current resistance

(peak value)

150 A

(60 Hz, 1 cycle)

220 A

(60Hz,1cycle)

440 A

(60Hz,1cycle)

Permissible I2t

(half 60-Hz wave)

121 A2s260 A2s1,260 A2s

Item G3PB-

515B-

3N-VD

G3PB-

515B-

2N-VD

G3PB-

525B-

3N-VD

G3PB-

525B-

2N-VD

G3PB-

535B-

3N-VD

G3PB-

535B-

2N-VD

G3PB-

545B-

3N-VD

G3PB-

545B-

2N-VD

Rated voltage 200 to 480 VAC

Operating voltage range 180 to 528 VAC

Rated carry current

(see note)

15 A 25 A 35 A 45 A

Minimum load current 0.5 A

Inrush current resistance

(peak value)

220 A

(60 Hz, 1 cycle)

440 A

(60Hz,1cycle)

Permissible I2t

(half 60-Hz wave)

260 A2s1,260 A2s

G3PB G3PB

Note: Rated carry current varies depending on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in

Engineering Data.

JCharacteristics

Item G3PB-

215B-

3N-VD

G3PB-

215B-

2N-VD

G3PB-

225B-

3N-VD

G3PB-

225B-

2N-VD

G3PB-

235B-

3N-VD

G3PB-

235B-

2N-VD

G3PB-

245B-

3N-VD

G3PB-

245B-

2N-VD

Operate time 1/2 of load power source cycle + 1 ms max. (DC input)

Release time 1/2 of load power source cycle + 1 ms max. (DC input)

Output ON voltage

drop

1.6 V (RMS) max.

Leakage current

(see note)

10 mA (at 200 VAC)

Insulation resistance 100 MΩmin. (at 500 VDC)

Dielectric strength 2,500 VAC, 50/60 Hz for 1 min

Vibration resistance 10 to 55 Hz, 0.175-mm single amplitude

Shock resistance 294 m/s2(98 m/s2with reverse mounting)

Ambient temperature Operating: --30°Cto80°C(--22°F to 176°F) with no icing or condensation

Storage: --30°C to 100°C(--30°F to 2121°F) with no icing or condensation

Ambient humidity Operating: 45% to 85%

Weight Approx. 1.25 kg (2.75 lbs) Approx. 1.45 kg (3.20 lbs) Approx. 1.65 kg (3.64 lbs) Approx. 2.0 kg (4.41 lbs)

Approved standards UL508, CSA22.2 No. 14, EN60947-4-3 (IEC947-4-3) approved by VDE

(From April 2001)

EMC Emission EN55011 Group 1 Class B

Immunity ESD IEC947-4-3, EN61000-4-2

4 kV contact discharge

8 kV air discharge

Immunity Electromagnetic IEC947-4-3, EN61000-4-3

10 V/m (80 MHz to 1 GHz)

Immunity EFT IEC947-4-3, EN61000-4-4

2 kV AC power-signal line

Immunity Surge transient IEC947-4-3, EN61000-4-5

Normal mode ±1kV,Commonmode±2kV

Immunity RF disturbance IEC947-4-3, EN61000-4-6

10 V (0.15 to 80 MHz)

Immunity Dips IEC947-4-3, EN61000-4-11

Note: The leakage current of phase S will be approximately times larger if the 2-element model is applied.



G3PBG3PB

Item G3PB-

515B-

3N-VD

G3PB-

515B-

2N-VD

G3PB-

525B-

3N-VD

G3PB-

525B-

2N-VD

G3PB-

535B-

3N-VD

G3PB-

535B-

2N-VD

G3PB-

545B-

3N-VD

G3PB-

545B-

2N-VD

Operate time 1/2 of load power source cycle + 1 ms max. (DC input)

Release time 1/2 of load power source cycle + 1 ms max. (DC input)

Output ON voltage

drop

1.8 V (RMS) max.

Leakage current

(see note)

20 mA (at 480 VAC)

Insulation resistance 100 MΩmin. (at 500 VDC)

Dielectric strength 2,500 VAC, 50/60 Hz for 1 min

Vibration resistance 10 to 55 Hz, 0.175-mm single amplitude

Shock resistance 294 m/s2(98 m/s2with reverse mounting)

Ambient temperature Operating: --30°Cto80°C(--22°F to 176°F) with no icing or condensation

Storage: --30°C to 100°C(--30°F to 2121°F) with no icing or condensation

Ambient humidity Operating: 45% to 85%

Weight Approx. 1.25 kg (2.75 lbs) Approx. 1.45 kg (3.20 lbs) Approx. 1.65 kg (3.64 lbs) Approx. 2.0 kg (4.41 lbs)

Approved standards UL508, CSA22.2 No. 14, EN60947-4-3 (IEC947-4-3) approved by VDE

(From April 2001)

EMC Emission EN55011 Group 1 Class B

Immunity ESD IEC947-4-3, EN61000-4-2

4 kV contact discharge

8 kV air discharge

Immunity Electromagnetic IEC947-4-3, EN61000-4-3

10 V/m (80 MHz to 1 GHz)

Immunity EFT IEC947-4-3, EN61000-4-4

2 kV AC power-signal line

Immunity Surge transient IEC947-4-3, EN61000-4-5

Normal mode ±1kV,Commonmode±2kV

Immunity RF disturbance IEC947-4-3, EN61000-4-6

10 V (0.15 to 80 MHz)

Immunity Dips IEC947-4-3, EN61000-4-11

Note: The leakage current of phase S will be approximately times larger if the 2-element model is applied.



Engineering Data

JLoad Current vs. Ambient Temperature (Continuous Input)

G3PB-215B-3N-VD

G3PB-215B-2N-VD

G3PB-515B-3N-VD

G3PB-515B-2N-VD

G3PB-225B-3N-VD

G3PB-225B-2N-VD

G3PB-525B-3N-VD

G3PB-525B-2N-VD

G3PB-245B-3N-VD

G3PB-245B-2N-VD

G3PB-545B-3N-VD

G3PB-545B-2N-VD

G3PB-235B-3N-VD

G3PB-235B-2N-VD

G3PB-535B-3N-VD

G3PB-535B-2N-VD

G3PB-225B-3N-VD

G3PB-225B-2N-VD

G3PB-525B-3N-VD

G3PB-525B-2N-VD

G3PB-215B-3N-VD

G3PB-215B-2N-VD

G3PB-515B-3N-VD

G3PB-515B-2N-VD

Load current (A)

Ambient temperature (_C)

G3PB-245B-3N-VD

G3PB-245B-2N-VD

G3PB-545B-3N-VD

G3PB-545B-2N-VD

G3PB-235B-3N-VD

G3PB-235B-2N-VD

G3PB-535B-3N-VD

G3PB-535B-2N-VD

Ambient temperature (_C)

Load current (A)

G3PB G3PB

JInrush Current Resistivity: Non-repetitive (Less than Half for Repetitive)

G3PB-215B-3N-VD

G3PB-215B-2N-VD

G3PB-225B-3N-VD G3PB-225B-2N-VD

G3PB-515B-3N-VD G3PB-515B-2N-VD

G3PB-525B-3N-VD G3PB-525B-2N-VD

G3PB-245B-3N-VD

G3PB-245B-2N-VD

G3PB-545B-3N-VD

G3PB-545B-2N-VD

G3PB-235B-3N-VD

G3PB-235B-2N-VD

G3PB-535B-3N-VD

G3PB-535B-2N-VD

Inrush current

Energized time (ms) Energized time (ms) Energized time (ms)

Inrush current

JInput Voltage vs. Input Current and Input Voltage vs. Input Impedance

Input voltage (V)

Input current (mA)

Input impedance (k )Ω

Input current

Input impedance

G3PBG3PB

Dimensions

Unit: mm (inch)

G3PB-215B-3N-VD G3PB-515B-3N-VD

G3PB-215B-2N-VD G3PB-515B-2N-VD

G3PB-225B-2N-VD G3PB-525B-2N-VD

Two, 4.6-dia. mounting holes

Four, 8 dia.

Two, R2.3

mounting

holes

80 max.

(3.15)

100 max.

(3.94)

80.5 max.

(3.17)

Mounting Hole Dimensions

Four,4.5-dia.orM4

30.5 max.

(1.20)

120 max.

(4.72)

Terminal Arrangement/

Internal Connections

G3PB-jjjB-3N-VD

G3PB-jjjB-2N-VD

Input circuit

Without Terminal Cover With Terminal Cover

Two, M3.5

Six, M4

(2.68) 90

(3.17)

90 ±0.3

(3.54 ±0.012)

(2.68)

64 ±0.3

(2.52 ±0.012)

G3PB G3PB

Unit: mm (inch)

G3PB-225B-3N-VD

G3PB-235B-2N-VD

G3PB-525B-3N-VD

G3PB-535B-2N-VD

Two, 4.6-dia. mounting holes

Four, 8 dia.

Two, R2.3

mounting

holes

120 max.

(4.72)

80.5 max.

(3.17)

Mounting Hole Dimensions

30.5 max.

(1.20)

120 max.

(4.72)

Terminal Arrangement/

Internal Connections

G3PB-jjjB-3N-VD

G3PB-jjjB-2N-VD

Input circuitInput circuit

Without Terminal Cover With Terminal Cover

Four,4.5-dia.orM4

Six, M5 (35 A type)

Six, M4 (25 A type)

Two, M3.5

80 max.

(3.15)

110

(4.33)

100

(3.94)

(2.68)

110 ±0.3

(4.33 ±0.012)

64 ±0.3

(2.52 ±0.012)

(2.68)

G3PBG3PB

Unit: mm (inch)

G3PB-235B-3N-VD

G3PB-245B-2N-VD

G3PB-535B-3N-VD

G3PB-545B-2N-VD

Two, 4.6-dia. mounting holes

Four, 8 dia.

140 max.

(5.51)

30.5 max.

(1.20)

G3PB-jjjB-3N-VD

G3PB-jjjB-2N-VD

Two, R2.3

mounting

holes

Four,4.5-dia.orM4

Without Terminal Cover With Terminal Cover

Terminal Arrangement/

Internal Connections

Input circuitInput circuit

Mounting Hole Dimensions

Two, M3.5

Six, M5

80.5 max.

(3.17)

120 max.

(4.72)

80 max.

(3.15)

120

(4.72)

130 ±0.3

(5.12 ±0.012)

64 ±0.3

(2.52 ±0.012)

(2.68)

130

(5.12)

G3PB G3PB

Unit: mm (inch)

G3PB-245B-3N-VD

G3PB-545B-3N-VD

Four, 8 dia.

G3PB-jjjB-3N-VD

110 max .

(4.33)

Two, 4.6-dia. mounting holes

Two, R2.3

mounting

holes

Without Terminal Cover With Terminal Cover

Mounting Hole Dimensions

Four, 4.5-dia.

or M4

Terminal Arrangement/

Internal Connections

Input circuit

Two, M3.5

Six, M5

140 max.

(5.51)

30.5 max.

(1.20)

80.5 max.

(3.17)

120 max.

(4.72)

80 max.

(3.15)

120

(4.72)

130 ±0.3

(5.12 ±0.012)

64 ±0.3

(2.52 ±0.012)

(2.68)

130

(5.12)

G3PBG3PB

Precautions

Do not touch the terminals (i.e., charged parts) of the G3PB

while power is supplied, otherwise an electric shock may be

received.

If the G3PB is provided with a terminal cover, be sure to attach

the terminal cover to the G3PB before operating the G3PB.

WARNING

The G3PB and radiator are very hot while power is supplied to

the G3PB.

Do not touch the G3PB or the radiator while power is supplied

to the G3PB or immediately after the G3PB is turned OFF,

otherwise a burn may result.

WARNING

Do not touch main circuit terminal of the G3PB immediately af-

ter the G3PB is turned OFF, otherwise an electric shock may

be received due to the residual charge of the built-in snubber

circuit.

WARNING

Be sure to turn OFF the power supply to the G3PB before wir-

ing, otherwise an electric shock may be received.

Mount the terminal cover to the G3PB after wiring.

Do not touch the terminals of the G3PB while power is sup-

plied, otherwise an electric shock may be received.

WARNING

Ensure that a short-circuit current does not flow on the load

side of the SSR, otherwise the G3PB may be damaged.

JGeneral Precautions

At OMRON, we are constantly working to improve the quality and

reliability of our products. SSRs, however, use semiconductors,

which are prone to malfunction. Be sure to use SSRs within their

rated values.

Use the SSR only in systems that are designed with redundan-

cies, flame protection, counter measures to prevent operation

errors, and other countermeasures to prevent accidents involving

human life or fires.

1. Do not apply voltages or currents to the G3PB’s terminals

in excess of the rated values. Doing so may result in

malfunction or burning.

2. Do not use the G3PB with terminal screws not properly

tightened. Abnormal heating of the terminals may result in

burning.

3. Do not obstruct the flow of air around the G3PB and the

radiator. Abnormal heating of the G3PB may result

short-circuiting of output elements and burning.

4. Perform wiring and tighten screws according to the

instructions given under Correct Use. Using the G3PB with

incorrect wiring or with the screws not tightened properly

may result in burning due to abnormal heating of the G3PB

during use.

JCorrect Use

Before Actual Operation

•The G3PB in operation may cause an unexpected accident.

Therefore it is necessary to test the G3PB under a variety of

conditions that are possible. As for the characteristics of the

G3PB, it is necessary to consider differences in

characteristics between G3PB Units.

•The ratings in this datasheet are tested values in a

temperature range between 15°C and 30°C, a relative

humidity range between 25% and 85%, and an atmospheric

pressure range between 88 and 106 kPa. It will be necessary

to provide the above conditions as well as the load conditions

if the user wants to confirm the ratings of actual G3PB Units.

Mounting Method

Since the Relay is heavy, firmly mount the DIN track and fix both

ends with End Plates for DIN-track-mounting models.

Applicable DIN Tracks

The G3PB can be mounted to TH35-15Fe (IEC60715) DIN

tracks. The manufacturers and models of DIN tracks to which

mounting is possible are shown in the following table.

Manufacturer Thickness

1.5 mm 2.3 mm

Schneider AM1-DE200 ---

WAGO 210-114, 210-197 210-118

PHOENIX NS35/15 NS35/15-2.3

Direct Mounting

When mounting directly onto a panel, mount securely under the

following conditions.

Screw diameter: M4

Tightening torque: 0.98 to 1.47 N Sm

Mounted State

Vertical Mounting Horizontal Mounting

Vertical direction

Panel

Note: Mount the G3PB so

that the markings

can be read.

Note: When the G3PB is

mounted horizontally,

use at 50% of the rated

load current.

Wiring duct 80 mm min.

80 mm min.

Wiring duct

Close Mounting

G3PB G3PB

Wiring

When using crimp terminals, refer to the terminal clearances

shown below.

Output Terminals Input Terminals

M4(15A,25A)

M5(35A,45A)

(0.51)

(0.47) 10

(0.39)

•Be sure that all lead wires are thick enough according to the

current.

•Output terminals T1, T2, and T3 are charged regardless of

whether the Unit is a 2- or 3-element model that is turned on

or off. Do not touch these terminals, otherwise an electric

shock may be received.

To isolate the Unit from the power supply, install an appropri-

ate circuit breaker between the power supply and Unit.

Be sure to turn off the power supply before wiring the Unit.

•Terminal L2 and terminal T2 of the 2-element model are

internally short-circuited to each other. Therefore, connect

terminal L2 to the ground terminal side of the power supply. If

terminal L2 is connected to a terminal other than the ground

terminal, cover all the charged terminals, such as heater

terminals, for the prevention of electric shock accidents and

ground faults.

Tightening Torque

Refer to the following and be sure to tighten each screw of the

Unit to the specified torque in order to prevent the Unit from mal-

functioning.

Item Screw terminal

diameter

Tightening torque

Input terminal M3.5 0.59 to 1.18 N Sm

Output terminal M4 0.98 to 1.47 N Sm

M5 1.47 to 2.45 N Sm

Operating Conditions

•Do not apply current exceeding the rated current otherwise,

the temperature of the G3PB may rise excessively.

•Be sure to prevent the ambient temperature rising due to the

heat radiation of the G3PB. If the G3PB is mounted inside a

panel, install a fan so that the interior of the panel is fully

ventilated.

•Do not use the G3PB if heat dissipation fins have been bent

as a result of, for example, dropping the G3PB. If used in this

state, the G3PB may be damaged due to the decreased heat

dissipation capacity.

•Only use the G3PB with loads that are within the rated values.

Using the G3PB with loads outside the rated values may

result in malfunction, damage, or burning.

•Use a power supply within the rated frequency range. Using a

power supply outside the rated frequency range may result in

malfunction, damage, or burning.

•Keep wiring separate from high-voltage power lines and use

wires of an appropriate length, otherwise malfunction and

damage may result due to induction.

•As protection against accidents due to short-circuiting, be sure

to install protective devices, such as fuses and no-fuse

breakers on the power supply side.

JOperating and Storage Environments

Operating Ambient Temperature

The rated value for the ambient operating temperature of the

G3PB is for when there is no built-up heat. For this reason, under

conditions where heat dissipation is not good due to poor ventila-

tion, and where heat may build up easily, the actual temperature

of the G3PB may exceed the rated value resulting in malfunction

on burning.

When using the G3PB, design the system to allow heat dissipa-

tion sufficient to stay below the Load Current vs. Ambient Tem-

perature characteristic curve. Note also that the ambient temper-

ature of the G3PB may increase as a result of environmental

conditions (e.g., climate, air-conditioning) and operating condi-

tions (e.g., mounting in an airtight panel).

Operating and Storage Locations

Do not use or store the G3PB in the following locations. Doing so

may result in damage, malfunction, or deterioration of perfor-

mance characteristics.

•Do not use or store in locations subject to direct sunlight.

•Do not use in locations subject to ambient temperatures

outside the range --20 to 60°C(--4°F to 140°F).

•Do not use in locations subject to relative humidity outside the

range 45% to 85% or locations subject to condensation as the

result of severe changes in temperature.

•Do not store in locations subject to ambient temperatures

outside the range --30 to 70°C(--22°F to 158°F).

•Do not use or store in locations subject to corrosive or

flammable gases.

•Do not use or store in locations subject to dust (especially iron

dust) or salts.

•Do not use or store in locations subject to shock or vibration.

•Do not use or store in locations subject to exposure to water,

oil, or chemicals.

Transportation

When transporting the G3PB, observe the following points. Not

doing so may result in damage, malfunction, or deterioration of

performance characteristics.

•Do not drop the G3PB or subject it to severe vibrations or

shock.

•Do not transport the product if it is wet.

Vibration and Shock

Do not subject the SSR to excessive vibration or shock. Other-

wise the SSR may malfunction and internal components may be

damaged.

To prevent the SSR from abnormal vibration, do not install the

G3PB in locations or by means that will subject it to the vibrations

from other devices, such as motors.

Solvents

Do not allow the G3PB to come in contact with solvents such as

thinners or gasoline. Doing so will dissolve the markings on the

SSR.

Oil

Do not allow the G3PB terminal cover to come in contact with oil.

Doing so will cause the cover to crack and become cloudy.

G3PBG3PB

JOperation

Leakage Current

A leakage current flows through a snubber circuit in the G3PB

even when there is no input. Therefore, always turn OFF the

power to the input or load and check that it is safe before replac-

ing or wiring the G3PB.

Switch element Snubber circuit

Input circuit

Trigger circuit

Varistor

Leakage current

Screw Tightening Torque

Tighten the G3PB terminal screws properly. If the screws are not

tight, the G3PB will be damaged by heat generated when the

power is ON.

Mounting

Do not perform mounting with oil or metal powder on your hands.

Doing so may result in damage to the G3PB.

Dropping

Be careful not to drop the G3PB during mounting. The G3PB

weighs approximately 1.25 to 2.0 kg and could cause injury if

dropped on any part of your body.

Cat.No. J112-E3-2 08/01/ 7.5 Specifications subject to change without notice. Printed in U.S.A.

OMRON ELECTRONICS LLC

OneEastCommerceDrive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8

416-286-6465

OMRON ON--LINE

Global -- http://www.omron.com

USA -- http://www.omron.com/oei

Canada -- http://www.omron.com/oci