DC/DC CONVERTERS 15W High Efficiency DC/DC Converters 1
2 YEAR WARRANTY
SXN15 Series
Dual positive output
•Two positive outputs
•Output voltage tracking
•High efficiency
•Approved to EN60950, UL/cUL1950
•Wide operating temperature up to and exceeding 65°C
(natural convection)
•Up to 100% load imbalance
•Trim function
•No minimum load
•Complies with ETS 300 019-1-3/2-3
•Fully compliant with ETS 300 386-1
The SXN15 is a new high efficiency open frame isolated 15 Watt converter series. The first
two models in the series feature an input voltage range of 33 to 75VDC and are available in
output voltages of 5V/3.3V and 3.3V/2.5V. The output voltage on each model is adjustable
from 90% to 110% of the nominal value. Typical efficiencies for the models are 86% for the
5V/3.3V and 85% for the 3.3V/2.5V version. The SXN15 series also has a remote on/off
capability with active high or active low logic. Overcurrent and overvoltage protection
features are included as standard. With full international safety approval including EN60950
and cUL1950, the SXN15 reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
ETS 300 386-1 table 5
Conducted emissions
EN55022 (See Note 6)
Level A
EN55022 (See Note 6)
Level B
Radiated emissions
EN55022 (See Longform Data Sheet)
Level B
Immunity:
ESD air EN61000-4-2 8kV, 15kV
ESD contact EN61000-4-2 6kV, 8kV
EFT DC power EN61000-4-4 2kV, 4kV
EFT signal EN61000-4-4 1kV, 2kV
Radiated field enclosure EN61000-4-3 10V/m
Surges indoor signal EN61000-4-5 500V
Conducted (DC power) EN61000-4-6 10V
Conducted (signal) EN61000-4-6 10V (See Note 7)
Input transients ETS 300 132-2, ETR 283
GENERAL SPECIFICATIONS
Efficiency See table
Operational insulation Input/output 1500VDC
Input fuse 2.0A slow blow
Switching frequency Fixed 265kHz
Approvals and UL/cUL1950, EN60950
standards TÜV Rheinland
(See Notes 1, 2 and 3)
Weight 12g (0.42oz)
MTBF MIL-HDBK-217F >600,000 hours
Representative model: 48S05 @ 48Vin, 40°C,
100% load ground benign
BELLCORE 332 >1,500,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient -40°C to +65°C
(See Note 5) temperature
Non-operating -40°C to +120°C
OUTPUT SPECIFICATIONS
Voltage adjustability Both outputs ±10% min.
Voltage setpoint Both outputs ±2% typ.
Voltage accuracy Both outputs ±4% max.
(See Note 8)
Output voltage 5V/3.3V 4.931V < Vo1 < 5.133V
(Over all line and 3.236V < Vo2 < 3.368V
load conditions) 3.3V/2.5V 3.297V < Vo1 < 3.431V
2.431V < Vo2 < 2.531V
Minimum load 0%
Ripple and noise 140mV pk-pk max.
20MHz bandwidth 50mV rms max.
Transient response D05-3V3, V01 180mV max.
50% to 75% to 50% D05-3V3, V02 100mV max.
D3V3-2V5, V01 150mV max.
D3V3-2V5, V02 100mV max.
Peak dev. settling time To 1.0%, no exter nal cap. 100µs
Short circuit protection 10A rms Continuous
(Isc) automatic recovery
Tracking Max. differential 0.7V during
start-up
INPUT SPECIFICATIONS
Input voltage range 48Vin nominal 33 to 75VDC
Input current No load 35mA max.
Remote OFF 25mA max.
UVLO turn ON voltage 33V (typ)
UVLO turn OFF voltage 30V (typ)
Active high remote ON/OFF (See Note 4)
Logic compatibility Open collector ref. to -input
ON Open circuit or >2VDC
OFF <1.2VDC
Start-up time Nominal line 2.5ms (typ)
SPECIFICATIONS
TÜV
File Name: SXN15D.PDF Rev: 15 Nov 2001