IL300 www.vishay.com Vishay Semiconductors Linear Optocoupler, High Gain Stability, Wide Bandwidth FEATURES * * * * * * * * * 8 NC C 1 A 2 K2 K1 7 NC C 3 6 C A 4 5 A i179026_2 V D E Couples AC and DC signals 0.01 % servo linearity Wide bandwidth, > 200 kHz High gain stability, 0.005 %/C typically Low input-output capacitance Low power consumption, < 15 mW Isolation rated voltage 4420 VRMS Internal insulation distance, > 0.4 mm Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * * * * * DESCRIPTION The IL300 linear optocoupler consists of an AlGaAs IRLED irradiating an isolated feedback and an output PIN photodiode in a bifurcated arrangement. The feedback photodiode captures a percentage of the LEDs flux and generates a control signal (IP1) that can be used to servo the LED drive current. This technique compensates for the LED's non-linear, time, and temperature characteristics. The output PIN photodiode produces an output signal (IP2) that is linearly related to the servo optical flux created by the LED. The time and temperature stability of the input-output coupler gain (K3) is insured by using matched PIN photodiodes that accurately track the output flux of the LED. Power supply feedback voltage / current Medical sensor isolation Audio signal interfacing Isolated process control transducers Digital telephone isolation AGENCY APPROVALS * * * * * * UL cUL DIN EN 60747-5-5 (VDE 0884-5) available with option 1 BSI FIMKO CQC ORDERING INFORMATION I L 3 0 0 - D PART NUMBER E F G - X K3 BIN 0 # # PACKAGE OPTION DIP-8 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 > 0.1 mm > 0.7 mm AGENCY CERTIFIED / PACKAGE UL, cUL, BSI, FIMKO K3 BIN 0.557 to 1.618 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 IL300 IL300-DEFG - - IL300-EF IL300-X006 IL300-DEFG-X006 - - IL300-EF-X006 DIP-8 DIP-8, 400 mil, option 6 Option 9 SMD-8, option 7 IL300-X007T(1) IL300-DEFG-X007T(1) SMD-8, option 9 IL300-X009T(1) IL300-DEFG-X009T(1) VDE, UL, BSI, FIMKO 0.557 to 1.618 DIP-8 DIP-8, 400 mil, option 6 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061 - IL300-E IL300-FG-X006 IL300-E-X006 IL300-F IL300-F-X006 IL300-EFG-X007 IL300-DE-X007T IL300-EF-X007T(1) IL300-FG-X007T - - IL300-EF-X009T(1) 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 IL300-X001 IL300-DEFG-X001 - - IL300-EF-X001 - IL300-E-X001 IL300-F-X001 IL300-X016 IL300-DEFG-X016 IL300-EFG-X016 - IL300-EF-X016 - - IL300-F-X016 - IL300-E-X007T IL300-F-X007T(1) - IL300-F-X009T(1) 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061 SMD-8, option 7 IL300-X017 IL300-DEFG-X017T(1) - - IL300-EF-X017T(1) - IL300-E-X017T IL300-F-X017T(1) SMD-8, option 9 - - - - IL300-E-X009T IL300-F-X019T(1) - - Note (1) Also available in tubes, do not put "T" on the end Rev. 2.0, 05-Mar-18 Document Number: 83622 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL300 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Power dissipation Pdiss Derate linearly from 25 C 160 mW 2.13 mW/C Forward current IF 60 mA Surge current (pulse width < 10 s) IPK 250 mA Reverse voltage VR 5 V Thermal resistance Rth 470 K/W Tj 100 C Junction temperature OUTPUT Power dissipation Pdiss Derate linearly from 25 C 50 mW 0.65 mW/C Reverse voltage VR 50 V Thermal resistance Rth 1500 K/W Tj 100 C Ptot 210 mW 2.8 mW/C Junction temperature COUPLER Total package dissipation at 25 C Derate linearly from 25 C Storage temperature Tstg -55 to +150 C Operating temperature Tamb -55 to +100 C Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT (LED EMITTER) IF = 10 mA Forward voltage VF temperature coefficient Reverse current Junction capacitance Dynamic resistance VF - 1.25 1.50 V VF/C - -2.2 - mV/C VR = 5 V IR - 1 - A VF = 0 V, f = 1 MHz Cj - 15 - pF IF = 10 mA VF/IF - 6 - Vdet = -15 V, IF = 0 A ID - 1 25 nA IF = 10 mA VD - 500 - mV A OUTPUT Dark current Open circuit voltage Short circuit current Junction capacitance Noise equivalent power IF = 10 mA ISC - 120 - VF = 0 V, f = 1 MHz Cj - 12 - pF Vdet = 15 V NEP - 4 x 10-14 - W/Hz - 1 - pF K1 0.006 0.012 0.017 COUPLER Input-output capacitance K1, servo gain (IP1/IF) VF = 0 V, f = 1 MHz IF = 10 mA, Vdet = -15 V Servo photocurrent (1)(2) IF = 10 mA, Vdet = -15 V IP1 - 120 - K2, forward gain (IP2/IF) IF = 10 mA, Vdet = -15 V K2 0.006 0.012 0.017 Forward current IF = 10 mA, Vdet = -15 V IP2 - 120 - A K3, transfer gain (K2/K1) (1)(2) Transfer gain stability Transfer gain linearity Rev. 2.0, 05-Mar-18 A IF = 10 mA, Vdet = -15 V K3 0.56 1 1.65 K2/K1 IF = 10 mA, Vdet = -15 V K3/TA - 0.005 0.15 %/C IF = 1 mA to 10 mA K3 - 0.25 - % - 0.5 - % IF = 1 mA to 10 mA, Tamb = 0 C to 75 C Document Number: 83622 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL300 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IFq = 10 mA, MOD = 4 mA, RL = 50 BW (-3 db) - 200 - kHz - -45 - Deg. PHOTOCONDUCTIVE OPERATION Frequency response Phase response at 200 kHz Vdet = -15 V Notes * Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements (1) Bin sorting: K3 (transfer gain) is sorted into bins that are 6 %, as follows: Bin A = 0.557 to 0.626 Bin B = 0.620 to 0.696 Bin C = 0.690 to 0.773 Bin D = 0.765 to 0.859 Bin E = 0.851 to 0.955 Bin F = 0.945 to 1.061 Bin G = 1.051 to 1.181 Bin H = 1.169 to 1.311 Bin I = 1.297 to 1.456 Bin J = 1.442 to 1.618 K3 = K2/K1. K3 is tested at IF = 10 mA, Vdet = -15 V (2) Bin categories: All IL300s are sorted into a K3 bin, indicated by an alpha character that is marked on the part. The bins range from "A" through "J". The IL300 is shipped in tubes of 50 each. Each tube contains only one category of K3. The category of the parts in the tube is marked on the tube label as well as on each individual part (3) Category options: standard IL300 orders will be shipped from the categories that are available at the time of the order. Any of the ten categories may be shipped. For customers requiring a narrower selection of bins, the bins can be grouped together as follows: IL300-DEFG: order this part number to receive categories D, E, F, G only IL300-EF: order this part number to receive categories E, F only IL300-E: order this part number to receive category E only SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT tr - 1 - s tf - 1 - s Rise time tr - 1.75 - s Fall time tf - 1.75 - s UNIT IF = 2 mA, IFq = 10 mA Switching time COMMON MODE TRANSIENT IMMUNITY PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Common mode capacitance VF = 0 V, f = 1 MHz CCM - 0.5 - pF f = 60 Hz, RL = 2.2 k CMRR - 130 - dB TEST CONDITION SYMBOL Common mode rejection ratio SAFETY AND INSULATION RATINGS PARAMETER Climatic classification According to IEC 68 part 1 Comparative tracking index VALUE UNIT 55 / 100 / 21 CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 C 7 mm 7 mm 0.4 mm Maximum rated withstanding isolation voltage Isolation resistance t = 1 min Creepage distance Clearance distance Insulation thickness DTI Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits Rev. 2.0, 05-Mar-18 Document Number: 83622 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL300 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) Axis Title Axis Title 10000 100 10000 0.025 100 1 1000 0.015 Tamb = 25 C 0.010 1.4 10 0 10 1.2 0 1.6 10 20 30 40 50 VF - Forward Voltage (V) IF - Forward Current (mA) Fig. 1 - Forward Current vs. Forward Voltage Fig. 4 - Servo Gain vs. Forward Current Axis Title Axis Title 10000 Tamb = -55 C 1000 1st line 2nd line Tamb = 0 C 300 Tamb = 25 C 200 100 Tamb = 85 C 100 Tamb = 100 C 10 0 0 5 10 15 20 Normalized to: IF = 10 mA, Tamb = 25 C 1.03 1.02 Tamb = 85 C Tamb = 100 C 1000 1.01 1st line 2nd line 400 10000 1.04 2nd line NK3 - Normalized Transfer Gain (K1/K2) 500 1.00 0.99 Tamb = -55 C Tamb = 25 C 100 Tamb = 0 C 0.98 0.97 10 0.96 25 0 10 20 30 40 50 IF - Forward Current (mA) IF - Forward Current (mA) Fig. 2 - Servo Photocurrent vs. Forward Current Fig. 5 - Normalized Transfer Gain vs. Forward Current Axis Title Axis Title 10000 8 Normalized to: IF = 10 mA, VD = -15 V, Tamb = 25 C 6 1000 4 1st line 2nd line Tamb = 25 C 5 Tamb = 0 C 3 RL = 1 k 1 Tamb = -55 C 100 2 2nd line Voltage Gain (dB) 7 10000 2 1000 0 -1 1st line 2nd line 2nd line IP1 - Servo Photocurrent (A) 100 Tamb = 85 C Tamb = 100 C 0.005 1.0 1st line 2nd line 1000 2nd line K1 - Servo Gain (IP1/IF) Tamb = 25 C 10 0.1 2nd line NIP1 - Normalized Photodiode Current Tamb = 0 C 0.020 1st line 2nd line 2nd line IF - Forward Current (mA) Tamb = -55 C RL = 10 k 100 -2 Tamb = 85 C -3 1 Tamb = 100 C 10 0 0 10 20 30 40 50 -4 0.01 IF = 10 mA, IF(MOD) = 2 mA 0.1 1 10 100 IF - Forward Current (mA) f - Frequency (kHz) Fig. 3 - Normalized Photodiode Current vs. Forward Current Fig. 6 - Voltage Gain vs. Frequency (2 mA) Rev. 2.0, 05-Mar-18 10 1000 Document Number: 83622 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL300 www.vishay.com Vishay Semiconductors Axis Title Axis Title 10000 -1 100 -2 -3 IF = 10 mA IFmod = 4 mA RL = 50 -4 0.01 0.1 1 10 100 10 1000 -20 1000 -40 1st line 2nd line 1000 1st line 2nd line 2nd line Voltage Gain (dB) 1 0 10000 0 2nd line Common Mode Rejection Ratio (dB) 2 -60 100 -80 -100 -120 0.1 1 Fig. 7 - Voltage Gain vs. Frequency Fig. 9 - Common-Mode Rejection Ratio vs. Frequency Axis Title 1st line 2nd line -4 100 -6 IF = 10 mA IFmod = 4 mA RL = 50 0.1 1 10 100 10 1000 10000 14 f = 1 MHz 12 10 1000 1st line 2nd line 1000 -2 2nd line Cj - Photodiode Junction Capacitance (pF) 10000 0 2nd line Phase Angle () 10 1000 f - Frequency (kHz) Axis Title -10 0.01 100 f - Frequency (kHz) 2 -8 10 8 6 100 4 2 10 0 0 2 4 6 8 10 f - Frequency (kHz) VR - Reverse Voltage (V) Fig. 8 - Phase Angle vs. Frequency Fig. 10 - Photodiode Junction Capacitance vs. Reverse Voltage Rev. 2.0, 05-Mar-18 Document Number: 83622 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL300 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) Pin one ID 0.527 0.889 3.302 3.810 6.096 6.604 2.540 0.46 0.58 1.016 1.270 1 8 2 7 3 6 4 5 4 1.270 9.652 10.16 7.112 8.382 0.254 ref. 7.62 typ. 0.254 ref. 0.508 ref. 3 9 ISO method A 10 0.203 0.305 i178010 2.794 3.302 Option 6 Option 7 Option 9 10.36 9.96 7.62 typ. 9.53 10.03 7.8 7.4 7.62 ref. 0.7 4.6 4.1 0.102 0.249 8 min. 0.35 0.25 0.25 typ. 0.51 1.02 8.4 min. 15 max. 8 min. 10.16 10.92 10.3 max. 18450 PACKAGE MARKING (example of IL300-E-X001) IL300-E V YWW 68 Rev. 2.0, 05-Mar-18 Document Number: 83622 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: IL300 IL300-DEFG IL300-DEFG-X001 IL300-DEFG-X007 IL300-E IL300-EF IL300-F IL300-F-X001 IL300-F-X007 IL300-F-X009T IL300-DEFG-X006 IL300-DEFG-X007T IL300-DEFG-X009 IL300-DEFG-X009T IL300-DEFG-X016 IL300-DEFG-X017 IL300-DEFG-X017T IL300-E-X001 IL300-E-X006 IL300-E-X007T IL300-EF-X001 IL300-EFX006 IL300-EF-X007 IL300-EF-X007T IL300-EF-X009 IL300-EF-X009T IL300-EF-X016 IL300-EF-X017 IL300-EFX017T IL300-F-X006 IL300-F-X009 IL300-F-X016 IL300-F-X017 IL300-F-X017T IL300-F-X019 IL300-F-X019T IL300-X001 IL300-X006 IL300-X007 IL300-X009 IL300-X009T IL300-X016 IL300-X017 IL300-X007T IL300-EX017T IL300-E-X009T