A KYOCERA GROUP COMPANY
ELCO
Varicon
1
ELCOELCO
Varicon®
Contents
The Varicon Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction to Varicon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Input/Output Rack and Panel Connectors
Series 8014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Series 8016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Varilok®Loose Contacts – Connector Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Series 8017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Series 8026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Series 8223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
In-line Two Piece Plug and Receptacles
Series 8020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Series 8022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Two Piece Printed Circuit Board Plug and Receptacles
Series 8218 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Series 8219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Series 7008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Series 7022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Series 7023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Series 7024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Series 7038 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Contact Strips
Series 7000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Series 5101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Series 5203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Series 5204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Series 5208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Series 5301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Series 5304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Installation Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Military Cross Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2
ELCOELCO
The Varicon Range
Pitch Number of Body Termination Current Series
Contacts Style Types Rating Number
(Amps)
0.050" 2 to 152 Plugs and Receptacles Staggered, Fixed: 5 8218
Solder, Eyelet
0.050" 18, 30, 36, 42, 54, 72 Plugs and Receptacles Staggered, Fixed: Straight & 5 8219
Right Angle Solder, Eyelet
Staggered,
0.075" x 0.130" Removable: Taper Tab, 8016
& 20, 38, 56, 90, 120 Plugs and Receptacles Eyelet, 8
0.075" x 0.150" Wire Wrap,
75, 100, 130 Crimp 8017
0.100" 17, 23, 29, 35, 41 Receptacles As Series 7024 8 7008
0.100" 17, 23, 29, 35, 41, 47 Plugs Staggered, 6 7022
Fixed: Solder
0.100" 17, 23, 29, 35, 41, 47 Receptacles Staggered, 6 7023
Fixed: Solder
Staggered,
Fixed: Solder,
0.100" 17, 23, 29, 35, 41 Receptacles Taper Tab, 8 7024
Eyelet,
Wire Wrap,
Bus Line
Staggered,
Removable: Taper Tab,
0.100" 17, 23, 29, 35, 41, 47 Receptacles Eyelet, 8 7038
Wire Wrap,
Crimp
0.100" 33, 75, 117, 165 Plugs and Receptacles Wire Wrap, 5 8026
Crimp
Square Grid Dual Row,
Fixed: Straight and Right
0.100" 24, 48, 72, 96 Plugs and Receptacles Angle Solder, 5 8223
Eyelet,
Wire Wrap, Crimp
Wrappable Removable
4mm 50, 64 Plug and Receptacle Crimp 2 8014
In-line
0.200" 2, 3 Plugs and Receptacles Fixed: Solder 8.5 8020
Crimp
In-line
0.200" 3 Plug and Receptacle Fixed: Solder 8.5 8022
Crimp
Elco’s Varicon product range is available as two-piece input /
output and board level connectors (intermateable plugs and
receptacles). Varicon contacts are also available in strips, on
disposable carriers, ready for staking to p.c. cards. They all
use the famous, fork-like Varicon®(fixed) or Varilok®
(insertable / removable) hermaphroditic contact design.
VARICON DESIGN ADVANTAGES
Elco’s hermaphroditic Varicon contact utilizes a fork-like
design incorporating four large mating surfaces that are
coined to achieve exceptional hardness and smoothness.
The mating surfaces are wedged together by the spring-like
design of the contact and by the innate properties of the
contact material. The Varicon contact has proven its reliabil-
ity in innumerable applications and with over one-million con-
tacts being produced daily, billions of successful, trouble-free
operating hours have been logged.
FEATURES
Four intimate contact areas, electrically parallel
High current carrying capability, excellent heat dissipation
Self-cleaning, wiping action burnishes contacting surfaces
reducing constrictive resistance
Low contact resistance 3 to 4 milliohms
Stable in vibration and adverse environments
High contact normal pressure achieved at low stress
levels
HIGH RELIABILITY
The mating surfaces provide a gas-tight connection and
resists corrosion caused by adverse environments. This seal
is made possible by the spring-like properties of the Varicon
contact and by the smoothness of the coined mating
surfaces. After being mated for years, the contacts still retain
clean, unoxidized mating surfaces.
LOW RESISTANCE
Because of the spring-like properties of the Varicon contact,
both sides of the contact are always under considerable
pressure when mated. Their sliding and wiping action
burnishes the surfaces in a self-cleaning action reducing any
constrictive resistance. The low contact resistance remains
a permanent feature of the Varicon contact even after thou-
sands of mating and unmating cycles.
HIGH CURRENT CAPACITY
The low contact resistance contributes substantially to
Varicon’s high current-carrying capacitor. Also, its heat-dissi-
pating characteristics are enhanced by its flat configuration.
SHOCK AND VIBRATION RESISTANCE
Should external forces cause any decrease in contact pres-
sure between two of the four mating surfaces, it is automat-
ically compensated by redistributing the contact pressure
between the other two mating surfaces.
ECONOMY
Varicon contacts are stamped from sheet stock instead of
screw-machined. Consequently, this production method not
only increases the production capacity but decreases pro-
duction cost as there is little waste.
VERSATILITY
The Varicon concept can be used in a card-mounted plug
that mates with a receptacle, or Varicon contacts can be
staked directly to a pc board and soldered into place. This
latter method eliminates the need for a conventional plug
reducing the cost of the connection system while retaining
the proven reliability of the Varicon interconnection.
CONTACT TYPES
Two basic sizes of our Varicon contact are available: stan-
dard and miniature Varicon. And each size has two major
variations: the fixed Varicon contact and the Varilok
insertable / removable version. The standard size is rated at
8 amps and has a withdrawal force range of 2 to 16 ounces
per contact. The miniature size is specifically for high densi-
ty applications and is rated at 5 amps with a withdrawal force
of 2 to 8 ounces per contact. (For exact specifications, check
the individual series listing.)
Varicon®
Introduction
Miniature Varicon®
Approx. 2X Actual Size
Standard Varicon®
3
ELCOELCO
CONTACT MATERIAL
The primary contact material used is phosphor bronze. The
electrical conductivity of copper alloys are extremely good.
Within the Varicon concept, the contacts must also perform
as springs and these alloys offer the elastic properties and
the endurance required by today’s rugged applications.
CONTACT PLATING
A nickel underplate of 50 to 100 microinches, followed by a
minimum of 10 microinches of gold plate is Elco’s standard
contact plating. The gold plate prevents the formation of
insulating oxide films while the nickel plate provides a hard
backing. It, in turn, reduces wear on the gold and prevents
diffusion between the gold and base metal. Other plating
thicknesses, such as those required by military specifica-
tions, can be supplied on request.
VARILOK CRIMP-AND-INSERT
CONTACTS
The crimp-termination, insertable / removable Varilok contact
offers a solderless connection between wire and contact as
well as strain relief for the wire. This contact snaps into the
insulator quickly and easily. With our simple tool it can be
removed without difficulty, yet it locks securely into place and
cannot twist or bend out of alignment.
Varilok contacts also are available with wire-wrappable, solder
and taper-tab tail configurations. Available loose for small
scale production and replacement purposes, the Varilok
contact is also supplied on reels for use with fast, economi-
cal automatic crimping machines reducing man-hour
requirements and production costs in medium and large-
scale production runs. Because the contact can be crimped
to the wire and installed into the insulator at any point during
the manufacturing operation, it offers the user convenience
and flexibility. Reels contain 1800 standard contacts or 3000
miniature contacts.
4
ELCOELCO
Varicon®
Introduction
Loose Varilok Contacts
Reel-Mounted Varilok Contacts
5
ELCOELCO
Varicon®
Introduction
Conductor Insulator
Single Varilok Mini-Varilok Diameter Diameter
Wire (Nominal) (Max. Overall)
#18 Yes No .048 .074
#20 Yes No .038 .062
#22 Yes Yes .030 .054
#24 Yes Yes .024 .048
#26 Yes Yes .019 .043
#28 No Yes .015 .039
#30 No Yes .012 .036
(Stranded)
MINI-VARILOK
The Mini-Varilok is half the size of the standard Varilok
contact. It’s designed for hand or machine crimping to solid
or stranded AWG #22 to #30 wire. Its basic features are
identical to the standard Varilok however it also incorporates
a decreased insertion force and is used for high density
applications. Production methods for the Mini-Varilok are the
same as the standard Varilok.
CONTACT RETENTION
The Varilok contact, after undergoing five insertion / extrac-
tion cycles and being subjected to the vibration and shock
tests of MIL-C-28731, still withstands an axial load in excess
of 10 pounds (6 for mini-varilok).
WIRE SIZE
The Varilok contact with its open crimp barrel conforms to
practically all specifications written for screw-machined con-
tacts with closed crimp barrels. The crimp barrel of the
Varilok contact is designed to accommodate wire sizes AWG
#18 to #26. It’s also possible to crimp together two strand-
ed #22 or smaller wires. The Mini-Varilok accommodates
wire sizes AWG #22 to #30. Table I lists the various sizes of
wire to which Varilok contacts can be crimped, and indicates
the minimum conductor diameter and the maximum insula-
tor diameter that can be accommodated by the contacts.
The crimp barrel is also crimped to the wire’s insulation for
strain relief and the large, overlapping ears of the barrel
accommodate a wide range of wire insulation sizes (Table I).
For an optimum crimp connection, the insulation is stripped
one-eighth inch from the end of the conductor.
Table I
Wire Sizes
(AWG)
(Ref: MIL-W-16878/4 – Type E wire)
CRIMP CHARACTERISTICS
The illustration shows an enlarged cross-section of a typical
Varilok crimp on a #22 stranded wire. No significant voids
are visible. The complete deformation of the wire strands
indicates optimum contact between the contact barrel and
the conductors.
TENSILE STRENGTH
Table II lists the values, in pounds, of tensile strength (wire
pull-out force) for Varilok and Mini-Varilok contacts crimped
to stranded AWG #18 to #30 wires.
Table II
Tensile Strength
(In Pounds)
CRIMPING EQUIPMENT
All equipment needed to crimp Varilok and Mini-Varilok
contacts is normally available from stock. Crimping equip-
ment for production crimping as well as hand-operated
crimping pliers are designed to realize the full electrical,
mechanical and economical advantages of the Varilok and
Mini-Varilok contact.
Wire Size
(AWG) #18 #20 #22 #24 #26 #28 #30
Stranded
Wire 40 25 15 10 5 3 1.5
6
ELCOELCO
Varicon®
Series 8014
Elco has introduced a new, metric version of the famous
Varicon connector. The wire to board 8014 series is available
in 50 or 64 positions and suitable for use in a VME front plate.
The Varicon contact is well known for high reliability and
durability under all conditions. Contacts are specified at 2
amps and low contact resistance. In the 8014 series, the
familiar hermaphroditic contact is shrouded on both sides to
protect and guide the contact to a perfect mating. Board
termination is right angle or vertical to plated through holes.
The connectors have actuating screws to assist mating and
unmating and to provide secure attachment. The covers
have integral cable clamps. The 50 position cover is plastic
and 64 position is die cast aluminum.
TECHNICAL SPECIFICATIONS MATERIAL / FINISH
Number of Contacts:
50, 64
Contact Spacing:
4.0mm
Current Rating:
2Amp/pin
Voltage Rating:
125V
Dielectric Withstanding
Voltage:
2000V rms/min.
Durability:
200 cycle
Applicable Wire Size:
AWG #18~#26
Operating Temperature:
-55~+105°C
Insulator:
Plug PBT
Rec. PBT
Contact:
Phosphor Bronze
Finish / Gold over Nickel
Hardware:
see individual drawing
7
ELCOELCO
Varicon®
Series 8014
10 8014 264 XXX
Variation 1 /
Contact Code
000 = No contact loaded
100 = Wire crimp contact
(loose pieces attached)
200 = Straight through hole
XXX
Variation 2 /
Finish, Color
000 = without cover, center-
screw, green insulator
100 = with cover, center-
screw, green insulator
ORDERING CODE (64 pos. Center-Screw Type Plug)
8
ELCOELCO
Varicon®
Series 8014
ORDERING CODE (64 pos. Center-Screw Type Receptacle)
20 8014 264 XXX
Variation 1 /
Contact Code
000 = No contact loaded
100 = Wire crimp contact
(loose pieces attached)
200 = Straight through hole
999 = Right angle through
hole
XXX
Variation 2 /
Finish, Color
000 = R/A through hole,
center lock nut,
green insulator
100 = ST through hole,
center lock nut,
green insulator
9
ELCOELCO
Varicon®
Series 8014
ORDERING CODE (50 pos. Side-Screw, Plug)
10 8014 350 XXX
Variation 1 /
Contact Code
000 = No contact loaded
100 = Wire crimp contact
(loose pieces attached)
200 = Straight through hole
XXX
Variation 2 /
Finish, Color
028 = Side-screw,
gray insulator
128 = Side-screw,
gray insulator
with cover
(038 = Side-short-screw,
gray insulator. . . .
special)
10
ELCOELCO
Varicon®
Series 8014
20 8014 350 999
Variation 1 /
Contact Code
999 = Right angle through
hole
028
Variation 2 /
Finish, Color
028 = Side-screw,
gray insulator
ORDERING CODE (50 pos. Side-Screw Receptacle)
70 8014 000 000 858
Finish Code
858 = 10 microinches
Gold over Nickel Plate
ORDERING CODE (Crimp Contact)
11
ELCOELCO
Varicon®
Series 8014
30 8014 001 000 225
ORDERING CODE (Cover, 64 pos. Center-Screw, Aluminum Die Cast)
30 8014 001 003 008
ORDERING CODE (50 pos. Side-Screw, Plastic (gray))
FEATURES
Available in five sizes: 20, 38, 56, 90 and 120 contacts
Insertable / removable Varilok contacts
Crimp, solder, solderless wrap, and taper tab terminations
Exceptional versatility: all hardware can be mounted on
plug or receptacle (see ordering code)
Actuating screw facilitates mating and unmating, locks
mated connectors together
Polarizing hardware can be set to any of six positions at
factory; can also be reset by user (see polarizing code)
Optional cover with top or side cable entry and clamp
Optional cable strain relief clamp with adjustable strap
for large or small cable bundles (fits on sizes 38 and 56)
Plug and receptacle contacts are protected from mishan-
dling
Guide pins and sockets ensure correct alignment when
mating
U.L. recognized polyester material
Aluminum covers
CSA acceptable polyester material
QPL approved polyester material
CABLE STRAIN RELIEF CLAMP
Adjustable for large or small cable bundles
Versatile clamp assembly permits mounting in various
directions. Can be mounted on plug and/or receptacle.
Order Number 30-8026-9601 for plug and cable-to-
cable applications
Order Number 30-8026-9602 for receptacle applications
Available for sizes 38 and 56
12
ELCOELCO
Varicon®
Series 8016 – .075" x .130" x .150" Grid Pattern
Current Rating:
8 amperes, maximum
Contact Resistance:
6 milliohms, maximum
Contact Material:
Phosphor bronze
Contact Plating:
Gold, 10 microinches min.,
over Nickel,
50-100 microinches
Insulator Material:
Thermoplastic 94V-O glass
filled polyester
Insulation Resistance:
5,000 megohms, min.
(polyester)
Sea Level: 1250 volts RMS
3.4" Hg: 625 volts RMS
TECHNICAL SPECIFICATIONS
Cover and Clamp Material
and Finish:
Aluminum with clear chromate
under grey enamel finish
Commercial Specification:
Covered under the components
recognition program of
Underwriters’ Laboratory, Inc.
File No. E-27610
.025.300
.400
.300
Contact Termination
*000 = Contacts not fitted and ordered separately,
see page 23 for full list of options
217 = Solder 0.098" x 2.49mm
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm
504 = Solder Tail –
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
Plug
001/501/601
002/502/602
903/503/603
904/504/604
905/505/605
906/506/606
Varicon®
Series 8016 – Rectangular Connector – 20 Way
ORDERING CODE
PLUG
Actuating
Screw
PLUG
Fixed
Nut
SOCKET
Actuating
Screw
SOCKET
Fixed
Nut
007/507/607
008/508/608
909/509/609
910/510/610
911/511/611
912/512/612
Receptacle
CONNECTOR PLUG AND
RECEPTACLE COMBINATIONS
European Version USA Versions Cover
Insulator Grey Polyester Grey Polyester Green Polyester and Actu-
Body Aluminum No No No Cable ating Fixed
Type Cover Cover Cover Cover Cover Cover Entrance Screw Nut
001 501 601 None Yes No
002 502 602 None No Yes
Male 903 503 603 Top* Yes No
(Exposed 904 504 604 Side* Yes No
Contacts) 905 505 605 Top* No Yes
906 506 606 Side* No Yes
007 507 607 None No Yes
008 508 608 None Yes No
Female 909 509 609 Top* Yes No
(Recessed 910 510 610 Side* Yes No
Contacts) 911 511 611 Top* No Yes
912 512 612 Side* No Yes
00
Prefix
8016
Series
Number
020
Number of
Contacts
217 001
See
Variation
Code
VARIATION CODE
Select variation code combinations marked with square in the table.
*These covers should only be used with crimp contacts.
*Crimp contacts always ordered separately.
See page 23 for details.
PIN LAYOUT
20
Way
13
ELCOELCO
14
ELCOELCO
Varicon®
Series 8016 – Rectangular Connector – 20 Way
CLAMPING AND COVER DIMENSIONS
16.26
6.35
3.81
Ø2.44
Ø3.50
4.77
32.39
24.38
10 AT 1.90
= 19.00
28.58 ±0.13
10.41 ±0.13
STANDARD COVERS
Cover Part Number Number Cable Clamp
Metric Screws Imperial Screws
European Version USA Version of Contacts Entrance Description Size mm (inches)
30-8016-9829-20-000 30-8016-9829-00-000 20 Side Standard 11.53 (0.454) Dia.
30-8016-9831-20-000 30-8016-9831-00-000 20 Top Standard 11.53 (0.454) Dia.
REMOVABLE SIDE PLATE COVERS millimeters (inches)
Cover Number of Cable Clamp
Part Number Contacts Entrance Description Minimum Size Maximum Size
30-8016-020-000-413 20 Side/Top Standard 5 x 10 (0.197 x 0.394) 10 x 10 (0.394 x 0.394)
30-8016-020-000-415 20 45° Standard 5 x 10 (0.197 x 0.394) 10 x 10 (0.394 x 0.394)
30-8016-020-000-423 20 Dual 90° Side/Top Special 2 - 5 x 10 (0.197 x 0.394) 2 - 10 x 10 (0.394 x 0.394)
30-8016-020-000-425 20 Dual 45° Entry Special 2 - 5 x 10 (0.197 x 0.394) 2 - 10 x 10 (0.394 x 0.394)
RECOMMENDED LAYOUT
FOR FRONT CHASSIS
MOUNTING & PCB LAYOUT
15
ELCOELCO
European Version USA Version Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Aluminum Cover No Cover Aluminum Cover No Cover Aluminum Cover No Cover Entrance Screw Nut
Std. Large Ex-Large Std. Large Ex-Large Std. Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp
001 501 601 None Yes No
002 502 602 None No Yes
Male 903 919 931 503 519 531 603 619 631 Top Yes No
(Exposed 904 920 932 504 520 532 604 620 632 Side Yes No
Contacts) 905 921 933 505 521 533 605 621 633 Top No Yes
906 922 934 506 522 534 606 622 634 Side No Yes
007 507 607 None No Yes
008 508 608 None Yes No
Female 909 923 935 509 523 535 609 623 635 Top Yes No
(Recessed 910 924 936 510 524 536 610 624 636 Side Yes No
Contacts) 911 925 937 511 525 537 611 625 637 Top No Yes
912 926 938 512 526 538 612 626 638 Side No Yes
Plug
001/501/601
002/502/602
903/503/603
904/504/604
905/505/605
906/506/606
919/519/619
920/520/620
921/521/621
922/522/622
931/531/631
932/532/632
933/533/633
934/534/634
Varicon®
Series 8016 – Rectangular Connector – 38 Way
00
Prefix
8016
Series
Number
038
Number of
Contacts
217 001
See
Variation
Code
ORDERING CODE
PLUG
Actuating
Screw
PLUG
Fixed
Nut
SOCKET
Actuating
Screw
SOCKET
Fixed
Nut
007/507/607
008/508/608
909/509/609
910/510/610
911/511/611
912/512/612
923/523/623
924/524/624
925/525/625
926/526/626
935/535/635
936/536/636
937/537/637
938/538/638
Receptacle
CONNECTOR PLUG AND
RECEPTACLE COMBINATIONS
VARIATION CODE
Select variation code combinations marked with square in the table.
Contact Termination
*000 = Contacts not fitted and ordered separately,
see page 23 for full list of options
217 = Solder 0.098" x 2.49mm
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm
504 = Solder Tail –
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
*Crimp contacts always ordered separately.
See page 23 for details.
PIN LAYOUT
38
Way
16
ELCOELCO
Varicon®
Series 8016 – Rectangular Connector – 38 Way
19.81
6.35
3.81
1.68 Ø3.79
Ø5.50
6.32
49.28
36.10
4 AT 3.30
= 13.20
4 AT 3.30
= 13.20
8 AT
1.90 = 15.24
42.88 ±0.13
11.89 ±0.13
CLAMPING AND COVER DIMENSIONS
STANDARD COVERS
REMOVABLE SIDE PLATE COVERS millimeters (inches)
Cover Number of Cable Clamp
Part Number Contacts Entrance Description Minimum Size Maximum Size
30-8016-038-000-413 38 Side/Top Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-038-000-415 38 45° Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-038-000-423 38 Dual 90° Side/Top Special 2 - 6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
30-8016-038-000-425 38 Dual 45° Entry Special 2 - 6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
Cover Part Number Number of Cable Clamp
Metric Screws Imperial Screws
European Version USA Version Contacts Entrance Description Size mm (inches)
30-8016-9821-20-000 30-8016-9821-00-000 38 Side Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9822-20-000 30-8016-9822-00-000 38 Top Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9825-20-000 30-8016-9825-00-000 38 Side Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9826-20-000 30-8016-9826-00-000 38 Top Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9838-20-000 30-8016-9838-00-000 38 Side Extra-Large 20.83 X 15.60 (0.820 x 0.614)
30-8016-9839-20-000 30-8016-9839-00-000 38 Top Extra-Large 20.83 X 15.60 (0.820 x 0.614)
OPTIONAL REMOVABLE SIDE PLATE COVER
RECOMMENDED LAYOUT
FOR FRONT CHASSIS
MOUNTING & PCB LAYOUT
17
ELCOELCO
European Version USA Version Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Aluminum Cover No Cover Aluminum Cover No Cover Aluminum Cover No Cover Entrance Screw Nut
Std. Large Ex-Large Std. Large Ex-Large Std. Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp
001 501 601 None Yes No
002 502 602 None No Yes
Male 903 919 931 503 519 531 603 619 631 Top Yes No
(Exposed 904 920 932 504 520 532 604 620 632 Side Yes No
Contacts) 905 921 933 505 521 533 605 621 633 Top No Yes
906 922 934 506 522 534 606 622 634 Side No Yes
007 507 607 None No Yes
008 508 608 None Yes No
Female 909 923 935 509 523 535 609 623 635 Top Yes No
(Recessed 910 924 936 510 524 536 610 624 636 Side Yes No
Contacts) 911 925 937 511 525 537 611 625 637 Top No Yes
912 926 938 512 526 538 612 626 638 Side No Yes
Varicon®
Series 8016 – Rectangular Connector – 56 Way
00
Prefix
8016
Series
Number
056
Number of
Contacts
217 001
See
Variation
Code
ORDERING CODE
PLUG - Actuating Screw
PLUG – Fixed Nut
SOCKET - Actuating Screw
SOCKET – Fixed Nut
PIN LAYOUT
56
Way
VARIATION CODE
Plug
001/501/601
002/502/602
903/503/603
904/504/604
905/505/605
906/506/606
919/519/619
920/520/620
921/521/621
922/522/622
931/531/631
932/532/632
933/533/633
934/534/634
007/507/607
008/508/608
909/509/609
910/510/610
911/511/611
912/512/612
923/523/623
924/524/624
925/525/625
926/526/626
935/535/635
936/536/636
937/537/637
938/538/638
Receptacle
CONNECTOR PLUG AND
RECEPTACLE COMBINATIONS
Select variation code combinations marked with square in the table.
Contact Termination
*000 = Contacts not fitted and ordered separately,
see page 23 for full list of options
217 = Solder 0.098" x 2.49mm
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm
504 = Solder Tail –
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
*Crimp contacts always ordered separately.
See page 23 for details.
18
ELCOELCO
Varicon®
Series 8016 – Rectangular Connector – 56 Way
19.81
6.35
3.81
1.68 Ø3.79
Ø5.50
7.24
64.31
51.13
6 AT 3.30
= 19.81
6 AT 3.30
= 19.81
8 AT
1.90 = 15.24
57.91 ±0.13
11.89 ±0.13
CLAMPING AND COVER DIMENSIONS RECOMMENDED LAYOUT
FOR FRONT CHASSIS
MOUNTING & PCB LAYOUT
STANDARD COVERS
OPTIONAL REMOVABLE SIDE PLATE COVER
REMOVABLE SIDE PLATE COVERS millimeters (inches)
Cover Number of Cable Clamp
Part Number Contacts Entrance Description Minimum Size Maximum Size
30-8016-056-000-413 56 Side/Top Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-056-000-415 56 45° Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-056-000-423 56 Dual 90° Side/Top Special 2 - 6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
30-8016-056-000-425 56 Dual 45° Entry Special 2 - 6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
Cover Part Number Number of Cable Clamp
Metric Screws Imperial Screws
European Version USA Version Contacts Entrance Description Size mm (inches)
30-8016-9823-20-000 30-8016-9823-00-000 56 Side Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9824-20-000 30-8016-9824-00-000 56 Top Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9827-20-000 30-8016-9827-00-000 56 Side Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9828-20-000 30-8016-9828-00-000 56 Top Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9840-20-000 30-8016-9840-00-000 56 Side Extra-Large 20.83 X 15.60 (0.820 x 0.614)
30-8016-9842-20-000 30-8016-9842-00-000 56 Top Extra-Large 20.83 X 15.60 (0.820 x 0.614)
19
ELCOELCO
European Version USA Version Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Cover No Cover Cover No Cover Cover No Cover Entrance Screw Nut
Large Ex-Large Large Ex-Large Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp
001 501 601 None Yes No
002 502 602 None No Yes
Male 903 931 503 531 603 631 Top Yes No
(Exposed 904 932 504 532 604 632 Side Yes No
Contacts) 905 933 505 533 605 633 Top No Yes
906 934 506 534 606 634 Side No Yes
007 507 607 None No Yes
008 508 608 None Yes No
Female 909 935 509 535 609 635 Top Yes No
(Recessed 910 936 510 536 610 636 Side Yes No
Contacts) 911 937 511 537 611 637 Top No Yes
912 938 512 538 612 638 Side No Yes
Varicon®
Series 8016 – Rectangular Connector – 90 Way
00
Prefix
8016
Series
Number
090
Number of
Contacts
217 001
See
Variation
Code
ORDERING CODE
PLUG - Actuating Screw
PLUG – Fixed Nut
SOCKET - Actuating Screw
SOCKET – Fixed Nut
PIN LAYOUT
90
Way
CONNECTOR PLUG AND
RECEPTACLE COMBINATIONS
VARIATION CODE
Plug
001/501/601
002/502/602
903/503/603
904/504/604
905/505/605
906/506/606
931/531/631
932/532/632
933/533/633
934/534/634
007/507/607
008/508/608
909/509/609
910/510/610
911/511/611
912/512/612
935/535/635
936/536/636
937/537/637
938/538/638
Receptacle
Select variation code combinations marked with square in the table.
Contact Termination
*000 = Contacts not fitted and ordered separately,
see page 23 for full list of options
217 = Solder 0.098" x 2.49mm
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm
504 = Solder Tail –
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
*Crimp contacts always ordered separately.
See page 23 for details.
20
ELCOELCO
Varicon®
Series 8016 – Rectangular Connector – 90 Way
28.58
7.93
1.72 Ø3.79
Ø6.75
5.88
67.81
52.07
14 AT 3.30 = 46.20
12 AT
1.90 = 22.86
57.96 ±0.13
19.43 ±0.13
CLAMPING AND COVER DIMENSIONS
STANDARD COVERS
OPTIONAL REMOVABLE SIDE PLATE COVER
REMOVABLE SIDE PLATE COVERS millimeters (inches)
Cover Number of Cable Clamp
Part Number Contacts Entrance Description Minimum Size Maximum Size
30-8016-090-000-413 90 Side/Top Standard 7 x 21 (0.276) 21 x 21 (0.827 x 0.827)
30-8016-090-000-415 90 45° Standard 7 x 21 (0.276) 21 x 21 (0.827 x 0.827)
30-8016-090-000-423 90 Dual 90° Side/Top Special 2 - 7 x 21 (0.276) 2 - 21 x 21 (0.827 x 0.827)
30-8016-090-000-425 90 Dual 45° Entry Special 2 - 7 x 21 (0.276) 2 - 21 x 21 (0.827 x 0.827)
Cover Part Number Number of Cable Clamp
Metric Screws Imperial Screws
European Version USA Version Contacts Entrance Description Size mm (inches)
30-8016-9832-20-000 30-8016-9832-00-000 90 Side Large 20.32 (0.800) Dia.
30-8016-9833-20-000 30-8016-9833-00-000 90 Top Large 20.32 (0.800) Dia.
30-8016-9843-20-000 30-8016-9843-00-000 90 Side Extra-Large 25.40 x 20.32 (1.00 x 0.008)
30-8016-9844-20-000 30-8016-9844-00-000 90 Top Extra-Large 25.40 x 20.32 (1.00 x 0.008)
RECOMMENDED LAYOUT
FOR FRONT CHASSIS
MOUNTING & PCB LAYOUT
21
ELCOELCO
European Version USA Version Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Cover No Cover Cover No Cover Cover No Cover Entrance Screw Nut
Large Ex-Large Large Ex-Large Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp
001 501 601 None Yes No
002 502 602 None No Yes
Male 503 531 503 531 603 631 Top Yes No
(Exposed 504 532 504 532 604 632 Side Yes No
Contacts) 505 533 505 533 605 633 Top No Yes
506 534 506 534 606 634 Side No Yes
007 507 607 None No Yes
008 508 608 None Yes No
Female 509 535 509 535 609 635 Top Yes No
(Recessed 510 536 510 536 610 636 Side Yes No
Contacts) 511 537 511 537 611 637 Top No Yes
512 538 512 538 612 638 Side No Yes
Varicon®
Series 8016 – Rectangular Connector – 120 Way
00
Prefix
8016
Series
Number
120
Number of
Contacts
217 001
See
Variation
Code
ORDERING CODE
PLUG - Actuating Screw
PLUG – Fixed Nut
SOCKET - Actuating Screw
SOCKET – Fixed Nut
PIN LAYOUT
120
Way
CONNECTOR PLUG AND
RECEPTACLE COMBINATIONS
VARIATION CODE
Plug
001/501/601
002/502/602
503/603
504/604
505/605
506/606
531/631
532/632
533/633
534/634
007/507/607
008/508/608
509/609
510/610
511/611
512/612
535/635
536/636
537/637
538/638
Receptacle
Select variation code combinations marked with square in the table.
Contact Termination
*000 = Contacts not fitted and ordered separately,
see page 23 for full list of options
217 = Solder 0.098" x 2.49mm
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm
504 = Solder Tail –
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
*Crimp contacts always ordered separately.
See page 23 for details.
22
ELCOELCO
Varicon®
Series 8016 – Rectangular Connector – 120 Way
CLAMPING AND COVER DIMENSIONS
36.07
7.93
4.13
Ø3.79
Ø6.75
7.05
68.23
52.07
14 AT 3.30 = 46.20
16 AT
1.90 = 30.48
60.33 ±0.13
22.23 ±0.13
STANDARD COVERS
Cover Part Number Number of Cable Clamp
Imperial Screws Contacts Entrance Description Size mm (inches)
30-8016-9834-00-000 120 Side Large 20.32 x 27.43 (0.800 x 1.080)
30-8016-9835-00-000 120 Top Large 20.32 x 27.43 (0.800 x 1.080)
30-8016-9845-00-000 120 Side Extra-Large 27.94 x 27.56 (1.100 x 1.085)
30-8016-9846-00-000 120 Top Extra-Large 27.94 x 27.56 (1.100 x 1.085)
NB: There are no removable side plate covers for the 120 Way version.
RECOMMENDED LAYOUT
FOR FRONT CHASSIS
MOUNTING & PCB LAYOUT
23
ELCOELCO
Contact Style Description Plating Specification Order Code
*Crimp Contact 0.25µM Gold All Over (Standard) 60 8017 0313 00 339
Loose 0.25µM Gold Nose & Tail (Optional) 60 8017 0313 00 042
Crimp Contact End Carrier 0.25µM Gold All Over (Standard) 60 8017 0323 99 339
(1800 Contacts per reel) 0.25µM Gold Nose & Tail (Optional) 60 8017 0323 99 042
0.25µM Gold All Over (Standard) 60 8017 0323 00 339**
0.25µM Gold Nose & Tail (Optional) 60 8017 0323 00 042**
Tail Section – 2.49 x 0.61 (0.098 x 0.024)
Solder Tag Contact 0.25µM Gold All Over (Standard) 60 8017 0513 00 339
*
Tail Section – 1.27 x 0.63 (0.025 x 0.005)
14.4mm Maxiwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0613 00 339
Tail Section – 1.27 x 0.63 (0.025 x 0.005)
19.3mm Maxiwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0623 00 339
Tail Section – 0.635 x 0.63 (0.025 x 0.005)
14.0 Miniwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0633 00 339
Tail Section – 0.635 x 0.63 (0.025 x 0.005) 4.3mm PC Solder Contact 0.25µM Gold All Over (Standard) 60 8017 0663 00 339
*for ø 1.00 mm P.T.H.
Varilok®
Loose Contacts
* Indicates standard contact
** Order code to be used when purchasing through a USA source.
Plating code 343 conforms to MIL SPEC requirement
Varilok®connectors can be specified as either fully loaded, to
include the connector body and a variety of pre-loaded
contact termination types or the empty body and a selection
of separately specified and ordered contacts. The table
below details the various loose contacts available.
P
Type of Connector Half
Plug = P
Socket = R
G
Location Side
(Large Dia.)
Guide Pin = G
Guide Socket = S
1
Positions
1 through 6
G
Location Side
(Small Dia.)
Guide Pin = G
Guide Socket = S
1
Positions
1 through 6
ORDERING CODE
Varicon®8016 Series connectors are designed with an inte-
gral polarizing system to ensure in high density environments
that the correct halves are mated together.
As a factory standard, male plugs are set to the code
P-G-1-G-1, with the female receptacles being set to the
opposite matching code R-S-1-S-1.
Customers who need to use this facility can either configure
the polarization codes themselves, or for an additional
charge provide AVX with the required polarization codes for
presetting by the factory, which will be supplied as a special
part 58-8016-XXX-000-XXX.
CONNECTOR POLARIZATION
Ordered separately
Ordered separately
If fitted type 217
If fitted type 218
If fitted type 750
If fitted type 296
If fitted type 504
24
ELCOELCO
Varicon®
Series 8017
Insulator Variation Cover &
Body Code Cable Actuating Fixed
Type No. Entrance Screw Screw
001 No Yes No
002 No No Yes
003 Top Yes No
Plug 004 Side Yes No
005 Top No Yes
006 Side No Yes
VARIATION CODE
RECOMMENDED CHASSIS LAYOUT
Insulator Variation Cover &
Body Code Cable Fixed Actuating
Type No. Entrance Nut Nut
007 No Yes No
008 No No Yes
Receptacle 009 Top Yes No
010 Side Yes No
011 Top No Yes
012 Side No Yes
00
Prefix
8017
Series
Number
XXX
Number of
Positions
75, 100, 130
XXX 0XX
See
Variation
Code
ORDERING CODE
Contact Code
217 = Solder 0.098" x 2.49mm –
60 8017 0513 00 339
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
60 8017 0613 00 339
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
60 8017 0623 00 339
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 0.66 x 14.7mm
60 8017 0633 00 339
313 = Wire Crimp (Contacts Loose) –
Must be ordered separately
60 8017 0313 00 339
323 = Wire Crimp (1800 Contacts on a Reel) –
60 8017 0323 99 339
Must be ordered separately
75/100/130 CONTACTS
Plug with Plug with
Actuating Screw 001 Fixed Screw 002
Receptacle with Receptacle with
Fixed Nut 007 Actuating Nut 008
Plug
75 CONTACTS
Plug
Receptacle
Receptacle
100 CONTACTS
Plug Receptacle
130 CONTACTS
Plug
001
002
003
004
005
006
007
008
009
010
011
012
Receptacle
CONNECTOR PLUG
AND RECEPTACLE
COMBINATIONS
No. of Front Chassis Mtg. Back Chassis Mtg.
Pos. B C D B C D
75
2.500/63.50 1.953/49.61 1.437/36.50 2.500/63.50 2.953/75.00 1.656/42.06
100 3.100/78.74 2.546/64.67 1.437/36.50 3.100/78.74 3.562/90.47 1.656/42.06
130 3.700/93.98 3.156/80.16 1.437/36.50 3.700/93.98 4.156/105.56 1.656/42.06
Dimensions inches/mm
25
ELCOELCO
CONTACT INSERTION TOOLS
These are small hand tools which provide a positive method for
inserting contacts into the rear of the insulator by applying pressure
on the contacts directly to the end of the insulation crimp.
Varicon®
Tools
Tool Contact Capability
06 1742 0400 00 000 Varilok®
No. 60 8017 Family
06 7698 01 000 0000 Mini Varilok®
No. 60 8216 Family
Part No. Contact Wire Size
HR-1 06 1984 0100 Varilok®AWG No. 18-26
HR-3 06 7705 0100 Mini Varilok®AWG No. 22-30
VARILOCK® Hand Crimp Tool
Contact Insertion Tool
Tool Contact Capability
06 1877 0400 00 000 Varilok®
No. 60 8017 Family
06 7699 01 000 0000 Mini Varilok®
No. 60 8216 Family
CRIMPING MACHINES
These heavy duty crimping machines
are designed for fast and economical
production-line crimping of contacts
supplied on reels. The machines
incorporate the unique DIALMATIC
crimp adjustment which permits the
machine operator to crimp contacts
to wires of different sizes by simply
adjusting two knobs.
SPECIFICATIONS
Press Rating: 3 Ton Capacity
Power: 240V AC, 50 Cycles
CONTACT EXTRACTION TOOLS
This tool is designed to extract contacts from the front of
the insulator quickly and easily, without damage to either
contacts or insulator.
Contact Extraction Tool
HAND CRIMP TOOLS
This tool is designed for hand crimping of contacts. The tool is well suited for maintenance,
model shop, laboratory and small scale production purposes. Two crimping cavities are
available; Upper Cavity will crimp wire 18-20 AWG and the Lower Cavity will crimp wire
22-26 AWG.
MINI VARILOCK® Hand Crimp Tool
Part No. Contact Capability Wire Type & Size
06 7852 7002 01 000 Varilok®Stranded AWG
No. 60 8017 0313 No. 18-26
Mini Varilok®Stranded AWG
06 7858 01 000 0000 No. 60 8216 0313 No. 22-30
26
ELCOELCO
Varicon®
Series 8026 – 0.100" Rectangular Connector
FEATURES
Economical miniature high-density connectors suitable for
high-reliability and military applications.
0.100" (2.54mm) square grid rack and panel connectors
with male and female insulators are available in four sizes:
33, 75, 117 and 165 contacts.
Insertable / removable mini-varilok and mini-wrap contacts.
Crimp and/or solderless wrap terminations.
Exceptional versatility: all hardware can be mounted on
plug or receptacle (see ordering code).
Actuating screw facilitates mating and unmating; locks
mated connectors together.
Keyed and shrouded insulator design prevents incorrect
mating and protects contacts from mishandling.
Simplified polarizing hardware permits 36 polarization
combinations per connector pair.
Optional covers with top or side cable entry and clamp.
Optional cable clamps.
Choice of any combination of hardware — or no hardware.
U.L. recognized-diallyl phthalate material.
QPL approved-diallyl phthalate material.
Current Rating:
5 amperes
Contact Resistance:
6 milliohms
Withdrawal Force:
2 to 8 ounces max. per contact
Material:
Phosphor Bronze
Standard Plating:
Gold, 10 microinches min.,
over Nickel,
50-100 microinches
Spacing:
0.100" (2.54mm)
TECHNICAL SPECIFICATIONS
CONTACTS INSULATORS
Insulation Resistance:
5,000 megohms, min.
(diallyl phthalate insulators)
5,000 megohms, min.
(polycarbonate insulators)
Dielectric Withstanding
Voltage:
Sea Level: 1,000 Volts rms
Materials:
0.100" (2.54mm) spacing –
diallyl phthalate, glass-filled,
flame resistant
ORDERING CODE
00 8026 033
Number of
Contacts
033 = 33
075 = 75
117 = 117
165 = 165
000
Contact Code
Order crimp contacts
separately by Part Number.
Otherwise specify contact code 491.
000 = Crimp (3000 - contact reel)
Part Number
60 8216 0323 00 339
000 = Crimp (loose contact)
Accepts #22-30 AWG wire
Part Number
60 8216 0313 00 339
491 = Wire wrappable removable contact .025"
(.635mm) sq. x .564" (14.33mm) tail
Part Number
60 8216 0413 00 339
803
Variation Code
Add 050 to order alternative
keying (Pin & Socket)
i.e. 701 = Standard hermaphroditic
keying
751 = Pin and socket keying
Complete a 15 digit assembly number
for each mating part, male and female.
27
ELCOELCO
Insulator Variation
Body Code Actuating Fixed Keying Cover
Type No. Screw Nut Hardware
701 Yes No Yes No
702 Yes No No No
Male 703 No Yes Yes No
(Exposed 704 No Yes No No
Contacts) 733 No No Yes No
734 No No No No
801 No Yes Yes No
802 No Yes No No
Female 803 Yes No Yes No
(Recessed 804 Yes No No No
Contacts) 833 No No Yes No
834 No No No No
Varicon®
Series 8026 – 0.100" Rectangular Connector
VARIATION CODES
33 Contacts
Table 1
Variation Code No.
Insulator Cover Cover Cable Actuating Fixed Keying
Body Without Small Large Entrance Screw Nut Hardware
Type Cover Clamp Clamp
701 No Yes No Yes
702 No Yes No No
703 No No Yes Yes
704 No No Yes No
733 No No No Yes
734 No No No No
705 713 Top Yes No Yes
706 714 Side Yes No Yes
Male 707 715 Top Yes No No
(Exposed 708 716 Side Yes No No
Contacts) 709 717 Top No Yes Yes
710 718 Side No Yes Yes
711 719 Top No Yes No
712 720 Side No Yes No
735 739 Top No No Yes
736 740 Side No No Yes
737 741 Top No No No
738 742 Side No No No
801 No No Yes Yes
802 No No Yes No
803 No Yes No Yes
804 No Yes No No
833 No No No Yes
834 No No No No
805 813 Top No Yes Yes
806 814 Side No Yes Yes
Female 807 815 Top No Yes No
(Recessed 808 816 Side No Yes No
Contacts) 809 817 Top Yes No Yes
810 818 Side Yes No Yes
811 819 Top Yes No No
812 820 Side Yes No No
835 839 Top No No Yes
836 840 Side No No Yes
837 841 Top No No No
838 842 Side No No No
75, 117 & 165 Contacts
Table 3
Insulator Variation
Body Code Actuating Fixed Keying Cover
Type No. Nut Nut Hardware
Male 501 Yes No Yes No
(Exposed 502 Yes No No No
Contacts) 503 No Yes Yes No
504 No Yes No No
601 No Yes Yes No
Female 602 No Yes No No
(Recessed 603 Yes No Yes No
Contacts) 604 Yes No No No
33 Contacts
Table 2
Variation Code No.
Insulator Cover Cover Cable Actuating Fixed Keying
Body Without Small Large Entrance Nut Screw Hardware
Type Cover Clamp Clamp
501 No Yes No Yes
502 No Yes No No
503 No No Yes Yes
504 No No Yes No
505 513 Top Yes No Yes
506 514 Side Yes No Yes
Male 507 515 Top Yes No No
(Exposed 508 516 Side Yes No No
Contacts) 509 517 Top No Yes Yes
510 518 Side No Yes Yes
511 519 Top No Yes No
512 520 Side No Yes No
601 No No Yes Yes
602 No No Yes No
603 No Yes No Yes
604 No Yes No No
605 613 Top No Yes Yes
606 614 Side No Yes Yes
Female 607 615 Top No Yes No
(Recessed 608 616 Side No Yes No
Contacts) 609 617 Top Yes No Yes
610 618 Side Yes No Yes
611 619 Top Yes No No
612 620 Side Yes No No
Table 4
28
ELCOELCO
Varicon®
Series 8026 – 0.100" Rectangular Connector
33 CONTACTS
Female Plug (Recessed Contacts)
For variation code number
See Table 1 See Table 2
Page 27 Page 27
75 CONTACTS
Female Plug (Recessed Contacts)
For variation code number
See Table 3 See Table 4
Page 27 Page 27
Clamp
Cover Cable 8026/.100"
Number Entrance Description (2.54mm) sq.
30-8016-9821 Side Small 75 Pin
30-8016-9822 Top Small 75 Pin
30-8016-9823 Side Small 117 Pin
30-8016-9824 Top Small 117 Pin
30-8016-9825 Side Large 75 Pin
30-8016-9826 Top Large 75 Pin
30-8016-9827 Side Large 117 Pin
30-8016-9828 Top Large 117 Pin
30-8016-9832 Side Large 165 Pin
Clamp
Cover Cable 8026/.100"
Number Entrance Description (2.54mm) sq.
30-8016-9833 Top Large 165 Pin
30-8016-9838 Side Ex-Large 75 Pin
30-8016-9839 Top Ex-Large 75 Pin
30-8016-9840 Side Ex-Large 117 Pin
30-8016-9842 Top Ex-Large 117 Pin
30-8016-9843 Side Ex-Large 165 Pin
30-8016-9844 Top Ex-Large 165 Pin
30-8016-9845 Side Ex-Large
30-8016-9846 Top Ex-Large
COVER CROSS REFERENCE, FOR DETAILS SEE 8016 CONNECTOR
29
ELCOELCO
Varicon®
Series 8026 – 0.100" Rectangular Connector
POLARIZATION / KEYING ALTERNATIVE KEYING
EXAMPLE (PIN & SOCKET)
P
Insulator Body Type
P = Male, R = Female
LS
Left Side Pin
5
Left Side Pin Position
1 through 6
RS
Right Side Pin
3
Right Side Pin Position
1 through 6
NOTE: Same size of pin and socket keying hardware are used
on all existing 8026 connectors (33, 75, 117, 165) – both sides
117 CONTACTS Female Plug (Recessed Contacts)
For variation code number
See Table 3 See Table 4
Page 27 Page 27
165 CONTACTS Female Plug (Recessed Contacts)
For variation code number
See Table 3 See Table 4
Page 27 Page 27
POLARIZATION CODE
Polarizing pins, when desired, are factory set in position #1.
Customer can reset as shown below, use tool No. 06 1989
02. To order factory settings other than position #1, fill out
the “Polarizing Code” below and submit it along with the
completed connector ordering code.
30
ELCOELCO
Code Profile Description Part No. H Board Fig.
Dim. Thk.
Coined Tail Formed 60 8223 0223 .080 1
000 90° after installing 60 8223 0213 .062
(Max. 0236 Diag.)
Coined Tail Formed 60 8223 0243 .093 1
000 90° after installing 60 8223 0253
(Max. 0236 Diag.)
473 P.C. Tail Coined 60 8223 0233 .400 2
(Max. 0236 Diag.)
519 P.C. Tail Coined 60 8223 0213 .279 2
(Max. 0236 Diag.)
520 P.C. Tail Coined 60 8223 0223 .479 2
(Max. 0236 Diag.)
558 P.C. Tail Coined 60 8223 0243 .309 2
559 (Max. 0236 Diag.) 60 8223 0253 .509 2
722 Wire Hole Tail 60 8200 1613 .162 3
(.032 x .050)
721 P.C. Tail .020 Sq. 60 8200 1623 .228 4
736 P.C. Tail .020 Sq. 60 8200 1633 .259 4
737 P.C. Tail .020 Sq. 60 8200 1643 .541 4
753 P.C. Tail .020 Sq. 60 8200 1653 .103 4
771 P.C. Tail .020 Sq. 60 8200 1663 .462 4
Crimp Contact 5
000 (Reel 3000) 60 8216 0323
22-30 AWG
000 Crimp Contact (Loose) 60 8216 0313 5
22-30 AWG
491 Wrappable/Removable 60 8216 0413 .560 6
Contact (.025 Sq.)
Varicon®
Series 8223 – 0.100" Dual Row Square Grid
FEATURES
Wide range of contact terminations including wire
wrapping, P.C. solder tail, wire hole, wire crimp
For 116", 332" P.C. card
Polarity and keying are built into the connector body
to prevent mismating
Perpendicular or parallel connector mounting
Proven Varicon®contact reliability
Protected male; recessed female contacts
Current Rating:
5 amperes with 22 AWG wire
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze
Nickel plate, 50 to 100 micro-
inches, followed by gold plate.
10 microinches minimum
Material:
Diallyl Phthalate, glass-filled,
flame resistant, per MIL-M-14-F,
Type SDGF
Insulation Resistance:
5,000 megohms, minimum
Dielectric Withstanding
Voltage:
Sea Level: 1,000 Volts rms
Insertion/Withdrawal Force:
2 to 8 ounces per contact
TECHNICAL SPECIFICATIONS
CONTACTS INSULATORS
ORDERING CODE
00 8223 024 000
Contact Code
001
Variation Code
Number of Contacts
024, 048, 072 & 096
Accessories
Guide Pins Sockets (R) Refer
Insulator Variation Contact Style Threaded To Board
Type Cover Bracket Keying Locking Lkg. Kyg. Figure Thickness
001 Formed Contact Terminal X 1 .080 2.03
.062 1.57
Male PC Terminal X 2
(Exposed 002 Wire Hole Terminal X 3
Contacts) PC Straight Terminal X 4
Crimp Contact X 5
003 Wrappable Removable X 6
004 Formed Contact Terminal X 1 .093 2.36
901 Formed Contact Terminal X 1 .080 2.03
.062 1.57
Female PC Terminal X 2
(Exposed 902 Wire Hole Terminal X 3
Contacts) PC Straight Terminal X 4
Crimp Contact X 5
903 Wrappable Removable X 6
904 Formed Contact Terminal X 1 .093 2.36
Use three digit code number when contacts are to
be factory installed. If contacts are to be supplied
loose, or contact tails to be formed, use three zeros
(000) in contact code section. Note that the wire
crimp tail contacts can only be ordered as separate
items by part numbers.
31
ELCOELCO
Varicon®
Series 8223 – 0.100" Dual Row Square Grid
MALE INSULATORS
FEMALE INSULATORS
CRIMP
TYPE
CRIMP
TYPE
MOUNTING LAYOUT MOUNTING HARDWARE
(See drawings for correct assembly of hardware.
Hardware shown is supplied with each board mounted
connector.)
KEY TO DIAGRAMS
Panel for Figures 2, 3, & 4 P.C. Board for Figure 1
Panel for Figures 5 & 6 P.C. Board for Figures 2, 3, & 4
No. of ABC D E FG HS
Contacts
24 1.1 2.2 1.4 1.9 1.27 1.252 1.26 Pg. 26 1.236
48 2.3 3.4 2.6 3.1 2.47 2.452 2.46 Pg. 26 2.436
72 3.5 4.6 3.8 4.3 3.67 3.652 3.66 Pg. 26 3.636
96 4.7 5.8 5.0 5.5 4.87 4.852 4.86 Pg. 26 4.836
Item Size Part # Unified Thread
55 #2 90-0502-0031-11-053
56 #2-5 90-0602-0121-11-053
58 #2-5 90-0902-0136-11-053
Item Size Part #
70 #2-5 60-8223-4562-11-062
71 #2-5 60-8223-4522-11-062
72 #2-5 60-8223-4662-11-062
73 #2-5 60-8223-4662-11-062
32
ELCOELCO
Varilok®
Series 8020 – Cable Connector
APPLICATION
In line connection of 2 or 3 wire of 18-26 AWG, insulation
ø1.03 mm to 1.88 mm.
FEATURES AND BENEFITS
2 and 3 position in single row
Uses identical molding for plug and socket
Uses identical contact for plug and socket
Uses standard Varicon 8016 contacts
Uses standard Varicon Crimping Tools, Contact
Extraction Tools and Insertion Tools
Has combined nylon mounting and locking clip
common to both sizes
Contacts for both solder and crimp termination
Contact:
Single row of 2 or 3 Varilok contacts
Configuration:
On a 0.200 inch pitch, 5.08 mm
Contact Rating:
8.5 amperes
Contact Resistance:
6 milliohms (max)
Insulation Resistance:
5,000 megohms (min)
Voltage Proof:
2,500 volts R.M.S. Sea Level
TECHNICAL SPECIFICATIONS
2 way connector 3 way connector
housing housing
Locking clip 2 way assembly
3 way assembly
CONNECTOR DIMENSIONS (mm) LOCKING CLIP DIMENSIONS (mm)
00
Prefix
8020
Series Number
002
Number of Contacts
002 = Two way
003 = Three way
217
*Contact Termination
217 = Solder Tag
218 = Wire Wrap
(0.61 x 1.27 x 14.4mm)
296 = Mini Wire Wrap
(0.61 x 0.66 x 4.73mm)
504 = Solder Tail
(0.61 x 0.66 x 4.32mm)
001
Variation Code
ORDERING CODE
FOR COMPLETE CONNECTORS WITH NON-CRIMP CONTACTS FITTED
ORDERING CODE FOR HOUSINGS AND CRIMP CONTACTS
Description Part Number Description Part Number
2 way connector: Housing only 60-8020-3117-00-000 0.25µM Gold reeled crimp contacts (gold all over) 60-8017-0323-99-339
3 way connector: Housing only 60-8020-3317-00-000 0.25µM Gold reeled crimp contacts (selective) 60-8017-0323-99-042
0.25µM Gold loose crimp contacts (gold all over) 60-8017-0313-00-339 NB: See page 23 for details of crimp contacts
0.25µM Gold loose crimp contacts (selective) 60-8017-0313-00-042 Locking clip 60-8020-3210-00-000
*Contact terminations should be insulated because they may protrude from the insulator.
NB: See page 23 for details of contacts.
33
ELCOELCO
Varilok®
Series 8022 – Cable Connector
APPLICATION
In line connection of 3 wires of 18-26 AWG, insulation ø1.03
mm to 1.88 mm.
FEATURES
3 position in single row
Male insulator incorporates two positive locking arms
for up to 1.6 mm thick panel mount
Uses identical contact for plug and socket
Uses standard Varicon 8016 contacts (8017 Series)
Uses standard Varicon Crimping Tools, Contact
Extraction Tools and Insertion Tools
Has mounting and locking clip mechanism
Contacts for both solder and crimp termination
Contact Spacing:
5.08 mm
Contact Rating:
8.5 amperes
Contact Resistance:
6 milliohms (max)
Insulation Resistance:
5K megohms
Voltage Proof:
2.5K volts R.M.S. Sea Level
Operating Temperature:
-55°C to 125°C
TECHNICAL SPECIFICATIONS
Panel Cutout
PART NUMBERS
Plug Molding: 60 8022 3218 00 000
Socket Molding: 60 8022 3318 00 000
Crimp Contacts (loose): 60 8017 0313 00 339 See page 23 for details
Crimp Contacts (reel): 60 8017 0323 00 339 of crimp contacts
Plug
Socket
34
ELCOELCO
004
Variation Code
001 = Receptacle
002 = Plug-Card
005 = Plug-Board
Varicon®
Series 8218 – 0.050" Staggered Dual Row
FEATURES
High contact density
For parallel or perpendicular p.c. card mounting
High mounting density (.050" centers, minimum)
Nylon end sections for mounting and card guidance
Mounting hardware supplied with connector
Mates with 8219 Series
TECHNICAL SPECIFICATIONS
ORDERING CODE
00 8218 100 000
Contact Code
Current Rating:
5 amperes, maximum
Contact Resistance:
0.005 ohm, maximum
Contact Material and Plating:
Phosphor Bronze
nickel plate, 30 to 50 microinches followed by
gold plate, 10 to 20 microinches
Insulator Material:
Diallyl phthalate, glass-filled, flame resistant,
end guides: nylon
Insulation Resistance:
5,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 1000 Volts rms
3.4" Hg: 500 Volts rms
Insertion/Withdrawal Force:
2 to 16 ounces per contact
Variant 002 right angled contacts
000 = 60 8200 16 33
P.C. Tail
000 = 60 8200 16 63
P.C. Tail
Variants 001 and 005
722 = 60 8200 16 13
Wire Hole Tail
736 = 60 8200 16 33
P.C. Tail (X = 9/32", Y = 1/4")
753 = 60 8200 16 53
P.C. Tail (X = 1/8", Y = 3/32")
771 = 60 8200 16 63
P.C. Tail (X = 31/64", Y = 29/64")
with keying pins
011 = Receptacle
012 = Plug-Card/pin
inserted in
odd position
013 = Plug-Card/pin
inserted in even
position
017 = Plug-Board
with keying holes
021 = Receptacle
022 = Plug-Card/pin
inserted in
odd position
023 = Plug-Card/pin
inserted in even
position
027 = Plug-Board
Number of Contacts
002 to 076 for connectors
without center guide
35
ELCOELCO
Varicon®
Series 8218 – 0.050" Staggered Dual Row
RECEPTACLE 001 – MATES WITH PLUGS 002 AND 005
MOUNTING LAYOUT
DIMENSIONS
Variation 001 and 005 Variation 002
Receptacle Variation 001 Plug Variation 002 Plug Variation 005
Determine polarization pin location from views.
P = Specify location by contact # where polarizing pin must be inserted.
H = Specify location by contact # where contact must be omitted for mating.
Typical Example: 00-8218-024-721-001-P-17 (polarizing pin mtd. in position 17)
00-8218-024-721-005-H-17 (polarizing hole is in position 17)
POLARIZATION
Keying Ordering No.
60-8218-4715-00-148
Minimum Center to Center
Spacing for Adjustment Plugs
ABCDE
(No. of contacts x “A” dimension “A” dimension “A” dimension “A” dimension
0.050") - 0.050" + 0.300" + 0.440" + 0.550" + 0.690"
(inches)
36
ELCOELCO
001 = Receptacle
Without 002 = Plug, parallel board mounting
Keying 005 = Plug, perpendicular board mounting
Code Contact Type “X”
No. Dim.
722 Wire hole tail .187
721 P. C. solder tail .250
736 P. C. solder tail .281
737 P. C. solder tail .562
753 P. C. solder tail .125
771 P. C. solder tail .484
Varicon®
Series 8219 – 0.050" Staggered Dual Row
FEATURES
For p.c. card-to-card applications
High contact density
Low withdrawal force contacts
Rugged, color coded end guides
Parallel or perpendicular p.c. board mounting
Mates with Series 8218
TECHNICAL SPECIFICATIONS
ORDERING CODE
00 8219 042
Number of Contacts
018, 030, 036, 042, 054, 072
722
Contact Code
(see below)
001
Variation Code
Current Rating:
5 amperes, maximum
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled, flame resist-
ant per MIL-M-14F, Type SDGF.
Guidance Hardware:
Left hand guides: Metal, gold color
Right hand guides: Metal, silver color
Insulation Resistance:
5,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 1000 Volts rms
3.4" Hg: 500 Volts rms
Insertion/Withdrawal Force:
2 to 8 ounces per contact
For Variation = 001
Code Contact Type
No.
000 P. C. solder tails formed
722 Wire hole tail unformed
For Variation = 002
Code Contact Type “Y”
No. Dim.
722 Wire hole tail .157
721 P. C. solder tail .219
736 P. C. solder tail .250
737 P. C. solder tail .531
753 P. C. solder tail .093
771 P. C. solder tail .453
For Variation = 005
NOTE: Connector is supplied with
mounting screws or eyelets, as applicable
(see drawings).
Contact Factory for Special Variations.
When Keying is ordered with part number, the Key is installed at the factory.
POLARIZING SYSTEM
37
ELCOELCO
Varicon®
Series 8219 – 0.050" Staggered Dual Row
Number Ref. Ref.
of A B C DEFG
K
Contacts
18 17 .850 (0.033) 1.150 (0.045) 1.290 (0.051) 1.400 (0.055) 1.540 (0.061) .964 (0.038) 1.300 (0.051)
30 29 1.450 (0.057) 1.750 (0.069) 1.890 (0.075) 2.000 (0.079) 2.140 (0.084) 1.564 (0.061) 1.900 (0.075)
36 35 1.750 (0.069) 2.050 (0.080) 2.190 (0.086) 2.300 (0.091) 2.440 (0.096) 1.864 (0.073) 2.220 (0.087)
42 41 2.050 (0.080) 2.350 (0.093) 2.490 (0.098) 2.600 (0.102) 2.740 (0.108) 2.164 (0.085) 2.500 (0.098)
54 53 2.650 (0.104) 2.950 (0.116) 3.090 (0.122) 3.200 (0.126) 3.340 (0.131) 2.764 (0.109) 3.100 (0.122)
72 71 3.550 (0.140) 3.850 (0.152) 3.990 (0.157) 4.100 (0.161) 4.240 (0.167) 3.664 (0.144) 4.000 (0.157)
DIMENSIONS: millimeters (inches)
RECEPTACLE 001 MATES WITH PLUGS 002 AND 005
MOUNTING LAYOUTS
*When used in metal panel with Code Contact 722 cut out diam. Is .210".
38
ELCOELCO
Varicon®
Series 7008 – 0.100" Staggered Dual Row
FEATURES
Available with or without card guides
Many sizes
Wide range of contact terminations
For 116" thick PCB
Polarization insert
Mates with Series 7000 and 7022 Plugs
TECHNICAL SPECIFICATIONS
00 7008 017
Number of Contacts
017, 023, 029, 035, 041
146
Contact Code
See table.
001
Variation Code
Current Rating:
10 amperes
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze per QQ-B-750,
Composition A.
Gold, 10 microinches minimum,
over nickel, 30 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled,
flame resistant, per MIL-M-14F,
Type SDGF.
Insulation Resistance:
25,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 2000 Volts rms
3.4" Hg: 675 Volts rms
Insertion/Withdrawal Force:
2 to 16 ounces per contact
141 = 60 7001 06 33
P.C. Termination for 1/8" Card
146 = 60 7001 13 13
.078" Base Taper Tab
156 = 60 7001 18 13
Wire wrapping (.026 x .062 x .600")
163 = 60 7001 19 13
.098" Base Taper Tab w/Wire Hole
165 = 60 7001 20 13
Forked Tail Solder Termination for Bus Line Connection
(.056 x .125" Slot)
166 = 60 7001 20 23
Dual Solder Termination for 2 Wires or Bus Line
(.056 x .125" Slot)
189 = 60 7004 02 13
Conventional Solder Termination for 3 Wires
Availability
Connector No. of Contacts
Description 17 23 29 35 41
With Guides – for 1/16" Card X X X X X
Without Guides – for 1/16" Card X X X X X
Card Card Code
Slot Guides
1/16" Yes 001
No 002
ORDERING CODE
39
ELCOELCO
Varicon®
Series 7008 – 0.100" Staggered Dual Row
Number G* H LN*
of AB C D E F +.010
Contacts Bottom 1/16" Card Con. N-Con. ±.003 –.000 Con. N-Con..
17 1.920 (0.076) 2.134 (0.084) 2.40 (0.094) 1.835 (0.072) .074 (0.003) .531 (0.021) .468 (0.018) .343 (0.014) 1.600 (0.063) 1.900 (0.075) .210 (0.008) .148 (0.006)
23 2.520 (0.099) 2.734 (0.108) 3.00 (0.118) 2.435 (0.096) .074 (0.003) .531 (0.021) .468 (0.018) .343 (0.014) 2.200 (0.087) 2.500 (0.098) .210 (0.008) .148 (0.006)
29 3.120 (0.123) 3.334 (0.131) 3.60 (0.142) 3.035 (0.119) .074 (0.003) .531 (0.021) .468 (0.018) .343 (0.014) 2.800 (0.110) 3.100 (0.122) .210 (0.008) .148 (0.006)
35 3.270 (0.129) 3.934 (0.134) 4.20 (0.165) 3.635 (0.143) .074 (0.003) .531 (0.021) .468 (0.018) .343 (0.014) 3.400 (0.134) 3.700 (0.146) .210 (0.008) .148 (0.006)
41 4.320 (0.170) 4.534 (0.179) 4.80 (0.190) 4.235 (0.167) .074 (0.003) .531 (0.021) .468 (0.018) .343 (0.014) 4.000 (0.157) 4.300 (0.169) .210 (0.008) .148 (0.006)
DIMENSIONS: millimeters (inches)
*N-CON = Non-Conductive Chassis
(1/16" Clearance Around Contacts)
CON = Conductive Chassis
(1/8" Clearance Around Contacts)
P.C. CARD LAYOUT
CHASSIS MOUNTING
40
ELCOELCO
Varicon®
Series 7022 – 0.100" Staggered Dual Row
FEATURES
Insulator rigidity reduces p.c. card warp
Insulator maintains exact spacing between contacts
Reduces cost of card punching operation (fewer holes)
Reduces cost of contact staking operation (one
operation instead of two)
Reduces assembly time (no plastic strip to remove)
For 116" or 332" p.c. card
Mates with Series 7000 Receptacles with or without
card guides
TECHNICAL SPECIFICATIONS
ORDERING CODE
MOUNTING LAYOUT
00 7022 023
Number of Contacts
017, 023, 029, 035, 041
For Series 7008 receptacle
000 001
Current Rating:
10 amperes
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze per QQ-B-750,
Composition A.
Gold, 10 microinches minimum,
over nickel, 30 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled, per
MIL-M-14F, Type SDGF.
Variation 001/002
Thermoplastic Polycarbonate
Variation 003
Insulation Resistance:
25,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 2000 Volts rms
3.4" Hg: 675 Volts rms
Insertion/Withdrawal Force:
2 to 16 ounces per contact
Variation Code
001 = 1/16" Module Card Thickness
002 = 3/32" Module Card Thickness
003 = 1/16" Module Card Thickness
60 7001 2913 for 1/16" Card 60 7001 2813 for 1/16" Card
60 7001 2923 for 3/32" Card
60 7001 2823 for 3/32" Card
41
ELCOELCO
Number C
of B Max. H
Contacts
17 2.200 (0.087) 2.470 (0.097) 1.600 (0.063)
23 2.800 (0.110) 3.070 (0.121) 2.200 (0.087)
29 3.400 (0.134) 3.670 (0.144) 2.800 (0.110)
35 4.000 (0.157) 4.270 (0.168) 3.400 (0.134)
41 4.600 (0.181) 4.870 (0.192) 4.000 (0.157)
47 5.200 (0.205) 5.470 (0.215) 4.600 (0.181)
Contacts used in this connector:
Card Upper Card Lower Card
Contacts Contacts
1/16" 60 7001 29 13 60 7001 28 13
3/32" 60 7001 29 23 60 7001 28 23
Varicon®
Series 7023 – 0.100" Staggered Dual Row
FEATURES
Guide pins facilitate mating, ensure correct alignment
Insulator rigidity reduces p.c. card warp
Insulator maintains exact spacing between contacts
Reduces cost of card punching operation (fewer holes)
Reduces cost of contact staking operation (one
operation instead of two)
Reduces assembly time (no plastic strip to remove)
For 116" or 332" p.c. card
Mates with Series 7024 and 7038 Receptacles
TECHNICAL SPECIFICATIONS
ORDERING CODE
MOUNTING LAYOUT
00 7023 023
Number of Contacts
017, 023, 029, 035, 041, 047
000 001
Current Rating:
10 amperes
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze per QQ-B-750,
Composition A.
Gold, 10 microinches minimum,
over nickel, 30 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled, flame resistant
per MIL-M-14F, Type SDGF.
Variation 001/002/110/111
Thermoplastic Polycarbonate
Variation 003
Insulation Resistance:
25,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 1800 Volts rms
3.4" Hg: 675 Volts rms
Insertion/Withdrawal Force:
2 to 16 ounces per contact
Diallyl Phthalate
Glass Filled
1/16" Card 3/32" Card 1/16" Card
001 002 003
110 111
ORDERING CODE
DIMENSIONS: millimeters (inches)
42
ELCOELCO
Varicon®
Series 7024 – 0.100" Staggered Dual Row
FEATURES
Guide sockets facilitate mating, ensure correct alignment
Open-ended card slot; use with p.c. card of any width
Wide range of contact terminations
Many sizes available
For 116" or 332" p.c. card
Mates with Series 7023 Plug
TECHNICAL SPECIFICATIONS
ORDERING CODE
00 7024 023
Number of Contacts
017, 023, 029, 035, 041
163
Contact Code
See table.
001
Variation Code
001 = 1/16" Thick Card
002 = 3/32" Thick Card
110 = 1/16" Thick Card
111 = 3/32" Thick Card
Current Rating:
10 amperes
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze per QQ-B-750,
Composition A.
Gold, 10 microinches minimum,
over nickel, 30 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled,
flame resistant, per MIL-M-14F,
Type SDGF.
Insulation Resistance:
25,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 1800 Volts rms
3.4" Hg: 675 Volts rms
Insertion/Withdrawal Force:
2 to 16 ounces per contact
141 = 60 7001 06 33
P.C. Termination for 1/8" Card
146 = 60 7001 13 13
.078" Base Taper Tab
156 = 60 7001 18 13
Wire wrapping (.026 x .062 x .600")
163 = 60 7001 19 13
.098" Base Taper Tab w/Wire Hole
165 = 60 7001 20 13
Forked Tail Solder Termination for Bus Line Connection
(.056 x .125" Slot)
166 = 60 7001 20 23
Dual Solder Termination for 2 Wires or Bus Line
(.056 x .125" Slot)
189 = 60 7004 02 13
Conventional Solder Termination for 3 Wires
Availability
Connector No. of Contacts
Description 17 23 29 35 41
For 1/16" Card X X X X X
For 3/32" Card X X X X X
43
ELCOELCO
Number ±.003 G†† N††
of A B C D E±.002 FH
Contacts Max. 1/16" Card 3/32" Card Con. N-Con. Con. N-Con.
17 1.900 (0.075) 2.300 (0.091) 2.570 (0.101) 1.185 (0.072) .074 (0.003) .105 (0.004) 17/32" .468 (0.018) .343 (0.014) 1.600 (0.063) .208 (0.008) .146 (0.006)
23 2.500 (0.098) 2.900 (0.114) 3.170 (0.125) 2.435 (0.096) .074 (0.003) .105 (0.004) 17/32" .468 (0.018) .343 (0.014) 2.200 (0.087) .208 (0.008) .146 (0.006)
29 3.100 (0.122) 3.500 (0.138) 3.770 (0.148) 3.035 (0.119) .074 (0.003) .105 (0.004) 17/32" .468 (0.018) .343 (0.014) 2.800 (0.110) .208 (0.008) .146 (0.006)
35 3.700 (0.146) 4.100 (0.161) 4.370 (0.172) 3.635 (0.143) .074 (0.003) .105 (0.004) 17/32" .468 (0.018) .343 (0.014) 3.400 (0.134) .208 (0.008) .146 (0.006)
41 4.300 (0.169) 4.700 (0.185) 4.970 (0.196) 4.235 (0.167) .074 (0.003) .105 (0.004) 17/32" .468 (0.018) .343 (0.014) 4.000 (0.157) .208 (0.008) .146 (0.006)
Varicon®
Series 7024 – 0.100" Staggered Dual Row
MOUNTING LAYOUT
DIMENSIONS: millimeters (inches)
†† N-CON = Non-Conductive Chassis
(1/16" Clearance Around Contacts)
CON = Conductive Chassis
(1/8" Clearance Around Contacts)
44
ELCOELCO
Varicon®
Series 7038 – 0.100"
Staggered Dual Row, Crimp Contacts
FEATURES
Varilok®contacts are insertable and removable
by user
Crimp, solderless wrap, tapered tab, and wire hole
terminations available
All crimping, insertion, and extraction equipment
available
Guide sockets facilitate mating, ensure correct
alignment
Open-ended card slot; no p.c. card notching
necessary
Mates with Series 7023 Plug
TECHNICAL SPECIFICATIONS
ORDERING CODE
00 7038 023
Number of Contacts
017, 023, 029,
035, 041, 047
000
Contact Code
See table.
001
Variation Code
001 = 1/16" Thick Card
002 = 3/32" Thick Card
110 = 1/16" Thick Card
111 = 3/32" Thick Card
Current Rating:
8 amperes
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled,
flame resistant, per MIL-M-14F,
Type SDGF.
Insulation Resistance:
5,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 1800 Volts rms
3.4" Hg: 675 Volts rms
Insertion/Withdrawal Force:
2 to 16 ounces per contact
217 = 60 8017 05 13
Wire Hole
218 = 60 8017 06 13
Solderless Wrap Tail – .025" x .050" x .567"
750 = 60 8017 06 23
Solderless Wrap Tail – .025" x .050" x .760"
296 = 60 8017 06 33
Solderless Wrap Tail – .025" x .025" x .580"
504 = 60 8017 06 63
Solderless Wrap Tail – .025" x .025" x .170"
*000 = 60 8017 03 13
Wire Crimp Tail (Contacts Loose) 18-26 AWG
*000 = 60 8017 03 23
Wire Crimp Tail
(Contacts on a Reel) 18-26 AWG
*Order separately by part number, refer to page 23
45
ELCOELCO
Varicon®
Series 7038 – 0.100"
Staggered Dual Row, Crimp Contacts
MOUNTING LAYOUT
Number
of A B C D E F G J
Contacts Max. 1/16" Card 3/32" Card
17 1.900 (0.075) 2.300 (0.091) 2.570 (0.101) 1.890 (0.075) .074 (0.003) .105 (0.004) 17/32" .571 (0.022) 1.850 (0.073)
23 2.500 (0.099) 2.900 (0.114) 3.170 (0.125) 2.490 (0.098) .074 (0.003) .105 (0.004) 17/32" .571 (0.022) 2.450 (0.096)
29 3.100 (0.122) 3.500 (0.138) 3.770 (0.148) 3.090 (0.121) .074 (0.003) .105 (0.004) 17/32" .571 (0.022) 3.050 (0.120)
35 3.700 (0.146) 4.100 (0.161) 4.370 (0.172) 3.690 (0.145) .074 (0.003) .105 (0.004) 17/32" .571 (0.022) 3.650 (0.144)
41 4.300 (0.169) 4.700 (0.185) 4.970 (0.196) 4.290 (0.169) .074 (0.003) .105 (0.004) 17/32" .571 (0.022) 4.250 (0.167)
47 4.900 (0.193) 5.300 (0.209) 5.570 (0.219) 4.890 (0.193) .074 (0.003) .105 (0.004) 17/32" .634 (0.025) 4.850 (0.191)
DIMENSIONS: millimeters (inches)
46
ELCOELCO
FEATURES
Plug consists only of contacts staked and
soldered to p.c. card; no other insulator needed
For 116" thick p.c. cards
Contacts supplied imbedded in vinyl strips,
correctly spaced and ready for insertion and
staking into p.c. card
Mates with Series 7000 Receptacles
TECHNICAL SPECIFICATIONS
ORDERING CODE
02
Contact
Strip
000
Number of Contacts
on Strip
1 (001) to 60 (060)
147
Contact Style
See table.
5
Contact
Pattern
200
Contact
Spacing
Current Rating:
10 amperes
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze per QQ-B-750,
Composition A.
†Gold, 10 microinches minimum,
over nickel, 30 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
†ELCO Standard Plating shown. Other
plating may be supplied on request.
For loose contacts, order by individual part numbers
tabulated on page 53.
Varicon®
Series 7000 – Contact Strip
Contact Contact
Contact Code Part No. Silhouette
1/16" Thick Card
Lower Tier 147 60 7001 15 13
Lower Tier
with Wire 135 60 7001 04 13
Hole
Upper Tier
with Wire 137 60 7001 05 13
Hole
Lower Tier
with Wire 144 60 7001 11 13
Hole
Upper Tier and Lower Tier
Contacts on Separate Strips
000
CONTACTS
Contacts are available on three spacings; each spacing
has a corresponding maximum number of contacts. Fewer
contacts can be ordered.
.200" spacing with a max. of 60 contacts.
.150" spacing with a max. of 80 contacts.
.125" spacing with a max. of 90 contacts.
47
ELCOELCO
Varicon®
Series 5101 – Contact Strip
Tandem Cards – Pad Spacings .125"/.150"/.200"
TECHNICAL SPECIFICATIONS
Contacts:
Contacts on .125", .150" or .200" Centers
Contacts supplied on disposable plastic
carrier strips.
Current Rating:
8 amperes
Contact Resistance:
0.006 Ohm, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
ORDERING CODE
HOLE LAYOUT
02 000
Number of Contacts
on Strip
001 to 090
according to spacing
000
Contact Style
046 1/16"card
5
Contact
000
Contact
Spacing
125, 150 or 200
For loose contacts, order by individual part numbers tabulated on page 53.
000
Pattern
48
ELCOELCO
02 000
Number of Contacts
on Strip
1 (001) to 63 (063)
000
Contact Style
5 200
Lower Tier:
135 1/16" card
144 1/16" card
147 1/16" card
228 1/16" card
Upper Tier:
137 1/16" card
02 000
Number of Contacts
on Strip
1 (001) to 125
000
Contact Style
1 200
Varicon®
Series 5203 – Contact Strip
Perpendicular Cards – Pad Spacing .100"
TECHNICAL SPECIFICATIONS
Current Rating:
8 amperes
Contact Resistance:
0.006 Ohm, maximum
Contact Material and Plating:
Phosphor Bronze
†Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
ORDERING CODE – BASE CARD CONTACTS
ORDERING CODE – MODULE CARD CONTACTS
Upper-tier and Lower-Tier Contacts on Separate Strips
FEATURES
For 116" and 332" thick p.c. cards
Contacts supplied imbedded in vinyl strips, correctly
spaced and ready for insertion and staking into p.c. card
Complete set of plug contacts supplied on two
disposable plastic strips, one for upper-tier contacts,
the other for lower-tier contacts
Efficient and economical installation equipment includes
staking and strip removal tools for all applications
†ELCO Standard Plating shown. Other plating may be supplied on request.
Lower and upper tier contacts are ordered separately.
Order one extra lower tier contact when pattern is to start
and end with a lower tier contact (example – 9 lower tier
and 8 upper tier).
Contact “X”
113 .060
114 .060
121 .281
122 .250
All hole diameters are .052 +.000
Hole locations to be within
–.004
.006" diameter of true location
Hole Layout
RIGHT
For loose contacts, order by individual part numbers tabulated on page 53.
000
000
113 1/16" card
114 3/32" card
121 3/32" card
122 1/8" card
49
ELCOELCO
49
ELCOELCO
02 000
Number of Contacts
on Strip
1 – 120 for In-Line Pattern
1 – 60 for Offset Pattern
000
Contact Style
5 000
Spacing Code
100 – for In-Line Pattern
200 – for Offset Pattern
000
In-Line:
332 1/16" card
Offset:
332 1/16" card, Lower Tier
372 1/16" card Upper Tier
02 000
Number of Contacts
on Strip
1 to 123
000
Contact Style
3
Pattern
3 – for In-Line Pattern
9 – for Offset Pattern
000
Spacing Code
100 – for In-Line Pattern
200 – for Offset Pattern
000
Variation
000 – for In-Line Pattern
009 – for Offset Pattern
010 – for Offset Pattern
Varicon®
Series 5204 – Contact Strip
Perpendicular Cards – Pad Spacing .100" (In-Line or Offset)
TECHNICAL SPECIFICATIONS
Contacts:
Supplied on disposable plastic
carrier strips
Current Rating:
5 amperes
Contact Resistance:
0.006 Ohm, maximum
Contact Material and Plating:
Phosphor Bronze
†Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
ORDERING CODE – BASE CARD CONTACTS
ORDERING CODE – MODULE CARD CONTACTS
Upper-tier and Lower-Tier Contacts on Separate Strips
†ELCO Standard Plating shown. Other plating may be supplied on request.
323 1/16" card
327 3/32" card
Lower and upper tier contacts of the offset pattern
assembly are ordered separately. Order one extra
lower tier contact when pattern is to start and end
with a lower tier contact (example – 9 lower tier and 8
upper tier).
Contact “X”
323 .125
327 .131
For loose contacts, order
by individual part numbers
tabulated on page 53.
Guide Pin – 62 5204 41 12 00 062
Guide Socket – 62 5204 40 12 00 062
Contacts
For loose contacts, order by individual
part numbers tabulated on page 53.
50
ELCOELCO
50
ELCOELCO
Varicon®
Series 5208 – Contact Strip
Perpendicular Cards – Pad Spacing .200"
TECHNICAL SPECIFICATIONS
Contacts:
Supplied on disposable plastic
carrier strips.
Current Rating:
8 amperes
Contact Resistance:
0.006 Ohm, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
02 000
Number of Contacts
on Strip
1 to 63
000
Contact Style
3 200 000
For loose contacts, order by individual
part numbers tabulated on page 53.
Contact “X”
113 .060
114 .060
115 .060
121 .281
122 .250
All hole diameters are .052 +.000
Hole locations to be within
–.004
.006" diameter of true location
113 1/16" card
114 3/32" card
121 3/32" card
122 1/8" card
02 000
Number of Contacts
on Strip
1 to 63
000
Contact Style
5 200 000
In-Line:
013 1/16" card
014 3/32" card
ORDERING CODE – BASE CARD CONTACTS
ORDERING CODE – MODULE CARD CONTACTS
Card Guides: See top drawing for appropriate part number
Contacts
HOLE LAYOUT
MODULE CARD
51
ELCOELCO
51
ELCOELCO
For loose contacts, order by individual
part numbers tabulated on page 53.
113 1/16" card
114 3/32" card
121 3/32" card
122 1/8" card
02 000
Number of Contacts
on Strip
001 to 090
according to spacing
000
Contact Style
6 000
Contact
Spacing
125, 150 or 200
000
Varicon®
Series 5301 – Contact Strip
Parallel Cards – .438" Between Cards
TECHNICAL SPECIFICATIONS
Contacts:
Supplied on disposable plastic
carrier strips
Current Rating:
8 amperes
Contact Resistance:
0.006 Ohm, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
ORDERING CODE
Contact “X”
113 .060
114 .060
121 .281
122 .250
Guide Pin – 62 5301 41 12 00 062 (1/16" card)
62 5301 41 22 00 062 (3/32" card)
Guide Socket – 62 5301 40 12 00 062 (1/16" card)
62 5301 40 22 00 062 (3/32" card)
Contacts – Contacts are available on four spacings;
each spacing has a corresponding
maximum number of contacts.
Fewer contacts can be ordered.
.200" spacing with a max. of 60 contacts per strip
.150” spacing with a max. of 80 contacts per strip
.125" spacing with a max. of 90 contacts per strip
52
ELCOELCO
For loose contacts, order by individual
part numbers tabulated on page 53.
02
Varicon®
Series 5304 – Contact Strip
Parallel Cards – .213" Between Cards
TECHNICAL SPECIFICATIONS
Contacts:
Contacts on .100 Centers
Supplied on disposable plastic
carrier strips
Current Rating:
5 amperes
Contact Resistance:
0.006 Ohm, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insertion/Withdrawal Force:
2 to 16 ounces per contact
ORDERING CODE
000
Number of Contacts
on Strip
001 to 120
000
Contact Style
6 100 000
Contact “X”
323 .125
327 .131
Guide Pin – 62 8202 40 12 00 062 (1/16" card)
Guide Socket – 62 5304 40 12 00 062 (1/16" card)
62 5301 40 12 00 062 (3/32" card)
323 1/16" card
327 3/32" card
53
ELCOELCO
Varicon®
Installation Equipment
HAND STAKER MODEL NO. 06 1856 01
Card Guide
Number
62 5204 41 12 00 062
62 5204 40 12 00 062
62 8202 40 12 00 062
62 8202 40 02 00 062
62 5304 40 12 00 062
62 5304 40 02 00 062
62 5301 41 12 00 062
62 5301 41 22 00 062
62 5301 41 32 00 062
62 5301 40 12 00 062
62 5301 40 22 00 062
62 5301 40 32 00 062
ORDERING CODE FOR
CARD GUIDE STAKING EQUIPMENT
Contacts can be fastened to the p.c. card by staking or sol-
dering and by the combination of staking and soldering.
Contact retention tests indicate that it requires 25 lbs.
of force to pull out a soldered contact, 45 lbs. for a staked
contact and 65 lbs. for a staked and soldered contact.
Staking is accomplished with a knife-like tool which shaves
a portion of the contact leg against the p.c. card. Elco
can furnish the necessary staking equipment for both high
quantity production and laboratory experimentation.
Once the contacts are fastened to the board it is generally
necessary to remove the plastic carrier strip. The plastic
should be softened prior to removal to avoid the possibility
of inadvertently bending the contacts.
Contacts supplied embedded in disposable plastic strips,
correctly spaced and ready for insertion and
staking into p.c. card.
Hand staker 06 1856 01 is designed for use as a multi-
purpose laboratory tool. This versatile tool enables you to
stake most contacts presently available. The hand staker
and replacement staking punches are available.
SPECIFICATIONS
Rating – 1/4 ton capacity
Ram Dimensions – 12" x 12" x 212"
Ram Stroke – 1316"
Height of Opening – under punch 1"
Throat depth from center of ram – 1"
Working Surface – 2" x 278"
Weight – 3 lbs.
Size – 4" wide x 5" deep x 4" high
Laboratory Tool for Contact Staking Model 06 1856 01
(Staking Punch Not Included)
Contact Loose Contact Staking Punch
Code Part Number Part Number
Number
013 60 5001 19 13 00 339 66 1280 02
014 60 5001 19 23 00 339 66 1280 02
046 62 5101 06 43 00 339 66 1280 02
113 62 5201 02 13 00 339 66 1280 02
114 62 5201 02 23 00 339 66 1280 02
121 62 5201 05 23 00 339 66 1280 19
122 62 5201 05 33 00 339 66 1280 19
135 60 7001 04 13 00 339 66 1280 02
137 60 7001 05 13 00 339 66 1280 02
144 60 7001 11 13 00 339 66 1280 02
147 60 7001 15 13 00 339 66 1280 02
228 60 7001 15 93 00 339 66 1280 02
332 60 8240 03 13 00 339 66 1280 17
371 60 8240 26 13 00 339 66 1280 17
372 60 8240 26 23 00 339 66 1280 17
323 60 8240 02 13 00 339 66 1280 17
327 60 8240 02 43 00 339 66 1280 17
ORDERING CODE FOR
LOOSE CONTACTS
54
ELCOELCO
Varicon®
QPL Cross Reference
Military Part No. ELCO
M21097/2 -01 00-5007-012-163-110
-04 00-5007-012-235-110
M21097/3 -01 02-012-013-5200-110
-02 02-012-014-5200-110
-03 02-015-013-5200-110
-04 02-015-014-5200-110
-05 02-018-013-5200-110
-06 02-018-014-5200-110
-07 02-022-013-5200-110
-08 02-022-014-5200-110
-09 02-026-013-5200-110
-10 02-026-014-5200-110
M21097/4 -01 00-7024-017-163-110
-02 00-7024-017-163-111
-04 00-7024-017-235-110
-07 00-7024-017-235-111
-09 00-7024-023-163-110
-10 00-7024-023-163-111
-12 00-7024-023-235-110
-15 00-7024-023-235-111
-17 00-7024-029-163-110
-18 00-7024-029-163-111
-20 00-7024-029-235-110
-23 00-7024-029-235-111
-25 00-7024-035-163-110
-26 00-7024-035-163-111
-28 00-7024-035-235-110
-31 00-7024-035-235-111
-33 00-7024-041-163-110
-34 00-7024-041-163-111
-36 00-7024-041-235-110
-39 00-7024-041-235-111
M21097/5 -01 00-7023-017-000-110
-02 00-7023-017-000-111
-03 00-7023-023-000-110
-04 00-7023-023-000-111
-05 00-7023-029-000-110
-06 00-7023-029-000-111
-07 00-7023-035-000-110
-08 00-7023-035-000-111
-09 00-7023-041-000-110
-10 00-7023-041-000-111
M28731/9 -0109 53-8016-020-199-109
-0110 53-8016-020-199-110
-0111 53-8016-020-199-111
-0112 53-8016-020-217-112
-0114 53-8016-020-217-114
-0115 53-8016-020-296-115
-0116 53-8016-020-296-116
M28731/9 -C 53-8016-020-000-122
-F 53-8016-020-000-158
M28731/10 -0109 53-8016-020-199-112
-0110 53-8016-020-199-113
-0111 53-8016-020-199-114
-0112 53-8016-020-217-115
-0113 53-8016-020-217-116
-0114 53-8016-020-217-117
-0115 53-8016-020-296-117
M28731/10 -C 53-8016-020-000-193
-F 53-8016-020-000-229
-H 53-8016-020-000-265
M28731/11 -0073 53-8016-038-199-103
-0074 53-8016-038-199-104
-0075 53-8016-038-217-108
-0076 53-8016-038-217-109
-0077 53-8016-038-296-107
-0078 53-8016-038-199-466
-0079 53-8016-038-217-466
-0080 53-8016-038-296-466
Military Part No. ELCO
M28731/11 -C 53-8016-038-000-221
-E 53-8016-038-000-466
-F 53-8016-038-000-257
M28731/12 -0073 53-8016-038-199-105
-0074 53-8016-038-199-106
-0075 53-8016-038-217-110
-0076 53-8016-038-217-111
-0077 53-8016-038-296-108
-0078 53-8016-038-199-465
-0079 53-8016-038-217-465
M28731/12 -C 53-8016-038-000-293
-F 53-8016-038-000-329
-H 53-8016-038-000-465
M28731/13 -0073 53-8016-056-199-100
-0074 53-8016-056-199-101
-0075 53-8016-056-217-104
-0076 53-8016-056-217-105
-0077 53-8016-056-296-106
-0078 53-8016-056-199-465
-0079 53-8016-056-217-465
-0080 53-8016-056-296-465
M28731/13 -C 53-8016-056-000-201
-E 53-8016-056-000-465
-F 53-8016-056-000-237
M28731/14 -0073 53-8016-056-199-102
-0074 53-8016-056-199-103
-0075 53-8016-056-217-106
-0076 53-8016-056-217-107
-0077 53-8016-056-296-108
-0078 53-8016-056-199-466
-0079 53-8016-056-217-466
M28731/14 -C 53-8016-056-000-273
-F 53-8016-056-000-309
-H 53-8016-056-000-465
M28731/15 -0073 53-8016-090-199-100
-0074 53-8016-090-199-101
-0075 53-8016-090-217-105
-0076 53-8016-090-217-106
-0077 53-8016-090-296-107
-0078 53-8016-090-199-275
-0079 53-8016-090-217-275
-0080 53-8016-090-296-275
M28731/15 -E 53-8016-090-000-275
-F 53-8016-090-000-157
-G 53-8016-090-000-121
M28731/16 -0073 53-8016-090-199-102
-0074 53-8016-090-199-103
-0075 53-8016-090-217-107
-0076 53-8016-090-217-108
-0077 53-8016-090-296-109
-0078 53-8016-090-199-276
-0079 53-8016-090-217-276
M28731/16 -F 53-8016-090-000-229
-G 53-8016-090-000-193
-H 53-8016-090-000-276
M28731/17 -0109 53-8016-120-199-100
-0110 53-8016-120-199-101
-0111 53-8016-120-199-102
-0112 53-8016-120-217-121
-0113 53-8016-120-217-122
-0114 53-8016-120-217-123
-0115 53-8016-120-296-107
-0116 53-8016-120-296-108
M28731/17 -E 53-8016-120-000-266
-F 53-8016-120-000-157
-G 53-8016-120-000-121
Military Part No. ELCO
M28731/18 -0109 53-8016-120-199-103
-0110 53-8016-120-199-104
-0111 53-8016-120-199-105
-0112 53-8016-120-217-124
-0113 53-8016-120-217-125
-0114 53-8016-120-217-126
-0115 53-8016-120-296-109
M28731/18 -F 53-8016-120-000-229
-G 53-8016-120-000-193
-H 53-8016-120-000-265
M28731/19 -0001 30-8016-98-29-03-000
-0002 30-8016-98-31-03-000
-0003 30-8016-98-21-03-000
-0004 30-8016-98-22-03-000
-0005 30-8016-98-25-03-000
-0006 30-8016-98-26-03-000
-0007 30-8016-98-23-03-000
-0008 30-8016-98-24-03-000
-0009 30-8016-98-27-03-000
-0010 30-8016-98-28-03-000
-0011 30-8016-98-32-03-000
-0012 30-8016-98-33-03-000
-0013 30-8016-98-34-03-000
-0014 30-8016-98-35-03-000
-0015 30-8016-98-38-03-000
-0016 30-8016-98-39-03-000
-0017 30-8016-98-40-03-000
-0018 30-8016-98-42-03-000
-0019 30-8016-98-43-03-000
-0020 30-8016-98-44-03-000
-0021 30-8016-98-45-03-000
-0022 30-8016-98-46-03-000
M28731/20 -0001 60-8017-0313-00-343
-0002 60-8017-0323-00-343
M28731/23 -0001 30-7015-9610-00-000
M28731/25 -0001 60-8017-0513-00-343
M28731/26 -0001 60-8017-0633-00-343
-0002 60-8017-0663-00-343
M28731/27 -0001 00-8026-033-580-101
-0002 00-8026-033-580-102
-0003 00-8026-033-580-103
-0004 00-8026-033-580-104
-0005 00-8026-033-491-105
-0006 00-8026-033-491-106
M28731/27 -C 00-8026-033-000-106
-D 00-8026-033-000-107
-E 00-8026-033-000-109
-F 00-8026-033-000-108
M28731/28 -0001 00-8026-033-580-107
-0002 00-8026-033-580-108
-0003 00-8026-033-580-109
-0004 00-8026-033-580-110
-0005 00-8026-033-491-111
-0006 00-8026-033-491-112
M28731/28 -C 00-8026-033-000-151
-D 00-8026-033-000-152
-E 00-8026-033-000-154
-F 00-8026-033-000-153
M28731/29 -0001 00-8026-075-580-101
-0002 00-8026-075-580-102
-0003 00-8026-075-580-103
-0004 00-8026-075-580-104
-0005 00-8026-075-491-105
-0006 00-8026-075-491-106
M28731/29 -D 00-8026-075-000-190
-E 00-8026-075-000-192
-F 00-8026-075-000-191
-G 00-8026-075-000-189
FUNCTIONAL EQUIVALENT TO:
55
ELCOELCO
Varicon®
QPL Cross Reference
Military Part No. ELCO
M28731/30 -0001 00-8026-075-580-107
-0002 00-8026-075-580-108
-0003 00-8026-075-580-109
-0004 00-8026-075-580-110
-0005 00-8026-075-491-111
-0006 00-8026-075-491-112
M28731/30 -D 00-8026-075-000-194
-E 00-8026-075-000-196
-F 00-8026-075-000-195
-G 00-8026-075-000-193
M28731/31 -0001 00-8026-117-580-101
-0002 00-8026-117-580-102
-0003 00-8026-117-580-103
-0004 00-8026-117-580-104
-0005 00-8026-117-491-105
-0006 00-8026-117-491-106
M28731/31 -D 00-8026-117-000-106
-E 00-8026-117-000-108
-F 00-8026-117-000-107
-G 00-8026-117-000-105
M28731/32 -0001 00-8026-117-580-107
-0002 00-8026-117-580-108
-0003 00-8026-117-580-109
-0004 00-8026-117-580-110
-0005 00-8026-117-491-111
-0006 00-8026-117-491-112
-0007 00-8026-117-580-265*
M28731/32 -D 00-8026-117-000-158
-E 00-8026-117-000-160
-F 00-8026-117-000-159
-G 00-8026-117-000-157
-H 00-8026-117-000-265*
M28731/33 -0001 00-8026-165-580-101
-0002 00-8026-165-580-102
-0003 00-8026-165-580-103
-0004 00-8026-165-580-104
-0005 00-8026-165-491-105
-0006 00-8026-165-491-106
M28731/33 -D 00-8026-165-000-104
-E 00-8026-165-000-106
-F 00-8026-165-000-105
-G 00-8026-165-000-103
M28731/34 -0001 00-8026-165-580-107
-0002 00-8026-165-580-108
-0003 00-8026-165-580-109
-0004 00-8026-165-580-110
-0005 00-8026-165-491-111
-0006 00-8026-165-491-112
-0007 00-8026-165-580-265
M28731/34 -D 00-8026-165-000-108
-E 00-8026-165-000-110
-F 00-8026-165-000-109
-G 00-8026-165-000-107
-H 00-8026-165-000-265
M55302/52 -01 00-8219-018-722-111
-02 00-8219-018-721-111
-03 00-8219-018-736-111
-04 00-8219-018-737-111
-05 00-8219-018-753-111
-06 00-8219-018-771-111
-07 00-8219-030-722-111
-08 00-8219-030-721-111
-09 00-8219-030-736-111
-10 00-8219-030-737-111
-11 00-8219-030-753-111
-12 00-8219-030-771-111
-13 00-8219-036-722-111
-14 00-8219-035-721-111
-15 00-8219-036-736-111
Military Part No. ELCO
M55302/52 -16 00-8219-036-737-111
-17 00-8219-036-753-111
-18 00-8219-036-771-111
-19 00-8219-042-722-111
-20 00-8219-042-721-111
-21 00-8219-042-736-111
-22 00-8219-042-737-111
-23 00-8219-042-753-111
-24 00-8219-042-771-111
M55302/52 -25 00-8219-054-722-111
-26 00-8219-054-721-111
-27 00-8219-054-736-111
-28 00-8219-054-737-111
-29 00-8219-054-753-111
-30 00-8219-054-771-111
-31 00-8219-072-722-111
-32 00-8219-072-721-111
-33 00-8219-072-736-111
-34 00-8219-072-737-111
-35 00-8219-072-753-111
-36 00-8219-072-771-111
M55302/53 -01 00-8219-018-722-112
-02 00-8219-018-000-112
-03 00-8219-030-722-112
-04 00-8219-030-000-112
-05 00-8219-036-722-112
-06 00-8219-036-000-112
-07 00-8219-042-722-112
-08 00-8219-042-000-112
-09 00-8219-054-722-112
-10 00-8219-054-000-112
-11 00-8219-072-722-112
-12 00-8219-072-000-112
M55302/54 -01 00-8219-018-722-115
-02 00-8219-018-721-115
-03 00-8219-018-736-115
-04 00-8219-018-737-115
-05 00-8219-018-753-115
-06 00-8219-018-771-115
-07 00-8219-030-722-115
-08 00-8219-030-721-115
-09 00-8219-030-736-115
-10 00-8219-030-737-115
-11 00-8219-030-753-115
-12 00-8219-030-771-115
-13 00-8219-036-722-115
-14 00-8219-036-721-115
-15 00-8219-036-736-115
-16 00-8219-036-737-115
-17 00-8219-036-753-115
-18 00-8219-036-771-115
-19 00-8219-042-722-115
-20 00-8219-042-721-115
-21 00-8219-042-736-115
-22 00-8219-042-737-115
-23 00-8219-042-753-115
-24 00-8219-042-771-115
-25 00-8219-054-722-115
-26 00-8219-054-721-115
-27 00-8219-054-736-115
-28 00-8219-054-737-115
-29 00-8219-054-753-115
-30 00-8219-054-771-115
-31 00-8219-072-722-115
-32 00-8219-072-721-115
-33 00-8219-072-736-115
-34 00-8219-072-737-115
-35 00-8219-072-753-115
-36 00-8219-072-771-115
Military Part No. ELCO
M55302/89 -01 00-8223-024-000-100
-02 00-8223-048-000-100
-03 00-8223-072-000-100
-04 00-8223-096-000-100
-05 00-8223-024-000-110
-06 00-8223-048-000-113
-07 00-8223-072-000-119
-08 00-8223-096-000-117
M55302/90 -01 00-8223-024-000-101
-02 00-8223-048-000-101
-03 00-8223-072-000-101
-04 00-8223-096-000-101
-05 00-8223-024-000-108
-06 00-8223-048-000-111
-07 00-8223-072-700-117
-08 00-8223-096-000-115
00-8223-024-000-109
M55302/91 -01 00-8223-024-473-100
-02 00-8223-024-722-100
-03 00-8223-024-753-100
-04 00-8223-024-721-100
-05 00-8223-024-736-100
-06 00-8223-024-771-100
-07 00-8223-024-737-100
-08 00-8223-048-473-100
-09 00-8223-048-722-100
-10 00-8223-048-753-100
-11 00-8223-048-721-100
-12 00-8223-048-736-100
-13 00-8223-048-771-100
-14 00-8223-048-737-100
-15 00-8223-072-473-100
-16 00-8223-072-722-100
-17 00-8223-072-753-100
-18 00-8223-072-721-100
-19 00-8223-072-736-100
FUNCTIONAL EQUIVALENT TO:
56
ELCOELCO
Internet/FAX/CD Rom/Software
Need Additional Information on AVX Products
AVX Products
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All
statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or
responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without
representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user
should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not
apply to all applications.
CONNECTORS
Automotive Connectors
Board to Board Connectors –
SMT and Through-Hole
Card Edge
Custom Designed Connectors
Customized Backpanel, Racking and
Harnessing Services
DIN 41612 Connectors
Insulation Displacement Connectors
I/O Connectors
Memory Card Headers and Sockets
MOBOTM, I/O, Board to Board and
Battery Connectors
Press-fit Connectors
Torson, 1.27mm (.050") Board to
Board Connectors
Wire to Board, Crimp or IDC
PASSIVES
Capacitors
Multilayer Ceramic
Tantalum
Microwave
Glass
Film
Power Film
Power Ceramic
Ceramic Disc
Trimmers
Resistors
Chip
Networks/Arrays
Potentiometers
Timing Devices
Resonators
Oscillators
Crystal
Filters
EMI
Bulk
Saw
Dielectric
Thin Film
Inductors
Fuses
Capacitors
Integrated Passive
Components
Low Inductance Chip Arrays
“Z” Chips
Capacitor Arrays
Dual Resonance Chips
Voltage Suppressor,
Varistors and Thermistors
Acoustical Piezos
Ferrites
Internet –
For more information visit us on the
worldwide web at
http://www.avxcorp.com
FAX Back Service –
Just dial 1-800-879-1613 and request
the index for additional catalog
information faxed to your FAX number.
CD ROM –
Or get in touch with your AVX
representative for a CD Rom or copies of
the catalogs and technical papers.
Software –
Comprehensive capacitor application
software library which includes:
SpiCap (for MLC chip capacitors)
SpiTan (for tantalum capacitors)
SpiCalci (for power supply capacitors)
SpiMic (for RF-Microwave capacitors)
S-VAR10M602-C
Contact:
USA
AVX Myrtle Beach, SC
Corporate Offices
Tel: 843-448-9411
FAX: 843-626-5292
AVX Northwest, WA
Tel: 360-699-8746
FAX: 360-699-8751
AVX North Central, IN
Tel: 317-848-7153
FAX: 317-844-9314
AVX Mid/Pacific, MN
Tel: 952-974-9155
FAX: 952-974-9179
AVX Southwest, AZ
Tel: 480-539-1496
FAX: 480-539-1501
AVX South Central, TX
Tel: 972-669-1223
FAX: 972-669-2090
AVX Southeast, NC
Tel: 919-878-6223
FAX: 919-878-6462
AVX Canada
Tel: 905-564-8959
FAX: 905-564-9728
EUROPE
AVX Limited, England
European Headquarters
Tel: ++44 (0) 1252 770000
FAX: ++44 (0) 1252 770001
AVX S.A., France
Tel: ++33 (1) 69.18.46.00
FAX: ++33 (1) 69.28.73.87
AVX GmbH, Germany - AVX
Tel: ++49 (0) 8131 9004-0
FAX: ++49 (0) 8131 9004-44
AVX GmbH, Germany - Elco
Tel: ++49 (0) 2741 2990
FAX: ++49 (0) 2741 299133
AVX srl, Italy
Tel: ++390 (0)2 614571
FAX: ++390 (0)2 614 2576
AVX Czech Republic, s.r.o.
Tel: ++420 (0)467 558340
FAX: ++420 (0)467 558345
A KYOCERA GROUP COMPANY
http://www.avxcorp.com
ASIA-PACIFIC
AVX/Kyocera, Singapore
Asia-Pacific Headquarters
Tel: (65) 258-2833
FAX: (65) 350-4880
AVX/Kyocera, Hong Kong
Tel: (852) 2-363-3303
FAX: (852) 2-765-8185
AVX/Kyocera, Korea
Tel: (82) 2-785-6504
FAX: (82) 2-784-5411
AVX/Kyocera, Taiwan
Tel: (886) 2-2696-4636
FAX: (886) 2-2696-4237
AVX/Kyocera, China
Tel: (86) 21-6249-0314-16
FAX: (86) 21-6249-0313
AVX/Kyocera, Malaysia
Tel: (60) 4-228-1190
FAX: (60) 4-228-1196
Elco, Japan
Tel: 045-943-2906/7
FAX: 045-943-2910
Kyocera, Japan - AVX
Tel: (81) 75-604-3426
FAX: (81) 75-604-3425
Kyocera, Japan - KDP
Tel: (81) 75-604-3424
FAX: (81) 75-604-3425
Elco - World Class Connections