MASW-008330-TR3 - M/A-COM Technology Solutions

GaAs SP3T 2.5 V Switch

DC - 3.0 GHz

Rev. V1

MASW-008330

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Features

 Low Voltage Operation: 2.5V

 Low Insertion Loss: 0.3 dB at 1 GHz

 0.5 micron GaAs PHEMT Process

 Lead-Free 2 mm 8-Lead PDFN Package

 100% Matte Tin Plating over Copper

 Halogen-Free ―Green‖ Mold Compound

 260°C Reflow Compatible

 RoHS* Compliant version of MASWSS0028

Description

M/A-COM’s MASW-008330 is a GaAs PHEMT

MMIC single pole three throw (SP3T) switch in a

lead-free 2 mm 8-lead PDFN package. The MASW-

008330 is ideally suited for applications where low

control voltage, low insertion loss, high isolation,

small size and low cost are required.

Typical applications are for filter and antenna

switching in handset systems that connect separate

receive functions to a common antenna, as well as

other related handset and general purpose

applications. This part can be used in all systems

operating up to 3 GHz requiring low control voltage.

The MASW-008330 is fabricated using a 0.5 micron

gate length GaAs PHEMT process. The process

features full passivation for performance and

reliability.

Pin Configuration

Pin No. Function Description

1 RFC RF In/Out

2 GND RF Ground

3 V1 Control 1

4 RF1 RF In/Out

5 RF2 RF In/Out

6 V2 Control 2

7 V3 Control 3

8 RF3 RF In/Out

Functional Schematic

Ordering Information1

Part Number Package

MASW-008330-TR3000 3000 piece reel

MASW-008330-001SMB Sample Test Board

(Includes 5 samples)

1. Reference Application Note M513 for reel size information.

V1 V2 V3 RFC -

RF1

RFC -

RF2

RFC -

RF3

0 1 0 On Off Off

1 0 0 Off On Off

0 0 1 Off Off On

Truth Table 2

2. 0 = 0 V ± 0.2 V, 1 = +2.5 V to +5 V.

Parameter Absolute Maximum

Max Input Power

(0.5 - 3 GHz, 2.5V Control) +32 dBm

Voltage ±8.5 volts

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

Absolute Maximum Ratings 3,4

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.

V2V1

GND V3

RF3

RF2RF1

RFC

100 pF

GaAs SP3T 2.5 V Switch

DC - 3.0 GHz

Rev. V1

MASW-008330

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V, Z0 = 50 Ω 5

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss 6

DC - 1 GHz

1 - 2 GHz

2 - 3 GHz

—

0.3

0.5

0.75

0.4

0.6

1.0

Isolation

DC - 1 GHz

1 - 2 GHz

2 - 3 GHz

—

Return Loss DC - 2.5 GHz

2.5 - 3 GHz

—

IP3 Two Tone, +0 dBm/tone, 1 MHz Spacing,

> 50 MHz dBm — 50 —

P1dB — dBm — 21 —

Trise, Tfall 10% to 90% RF, 90% to 10% RF nS — 13 —

Ton, Toff 50% control to 90% RF and 50% control to 10% RF nS — 15 —

Transients In Band mV — 30 —

Control Current |VC| = 2.5V µA — 1 10

5. External DC blocking capacitors are required on all RF ports.

6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz.

Lead Free 2 mm 8-lead PDFN †

† Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

GaAs SP3T 2.5 V Switch

DC - 3.0 GHz

Rev. V1

MASW-008330

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves vs. Frequency and Temperature

Insertion Loss Isolation

Return Loss Qualification

Qualified to M/A-COM specification REL-201,

Process Flow –2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

0.0

0.2

0.4

0.6

0.8

1.0

0.5 1.0 1.5 2.0 2.5 3.0

Insertion Loss +25C

Insertion Loss +85C

Insertion Loss -40C

Frequency (GHz)

0.5 1.0 1.5 2.0 2.5 3.0

Isolation +85C

Isolation +25C

Isolation -40C

Frequency (GHz)

0.5 1.0 1.5 2.0 2.5 3.0

Return Loss +85C

Return Loss +25C

Return Loss -40C

Frequency (GHz)

GaAs SP3T 2.5 V Switch

DC - 3.0 GHz

Rev. V1

MASW-008330

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.