DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DO NOT
SCALE FROM
THIS PRINT
DCA-17-XX
STYLE
-01: PANEL MOUNT DUST CAP
-02: CABLE DUST CAP
-03: USB FLASH DRIVE COVER
125.00
REF
4.921
7.50
REF
.295
39.51
REF
1.556
DC-17-01
DCFS-17-01
16.35 .644
REF
1.20
REF
.047
(SEE NOTE 3)
C
FIG 1
DCA-17-01 SHOWN
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
0.3 [.01] 2
.XX:
0.13 [.005]
.XXX:
0.051 [.0020]
MATERIAL:
DUST CAP ASSEMBLY
BY:
DCA-17-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CHAD F
11/22/2004
3
1
SHEET SCALE: 1:1
STRAP: LDPE
CAP: PA66
O-RING: SILICONE
F:\DWG\MISC\MKTG\DCA-17-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. VENDOR TO ASSEMBLE PARTS.
3. COMPONENTS MUST BE PRESSED DOWN BELOW SNAPS.
4. DCA-17-03 WILL ACCOMODATE USB DEVICE WITH DIMENSIONS 80.00mm X
13.30mm X 20.25mm.
5. TORQUE SPECIFICATION FOR SCN-17-04 IS 12 IN-LB.
6. MIN BEND RADIUS: 6.00 [.24]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION E
39.50
REF
1.555
16.80 .661
REF
(SEE NOTE 3)
DCFS-17-01
OR-17-01
DC-17-02
FIG 2
DCA-17-02 SHOWN
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
SHEET OF
DUST CAP ASSEMBLY
BY:
DCA-17-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CHAD F
11/22/2004
3
2
SHEET SCALE: 1:1
REVISION E
F:\DWG\MISC\MKTG\DCA-17-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
98.70
REF
3.886
(SEE NOTE 3)
(SEE NOTE 5)
DCFS-17-01
SCN-17-04
DC-17-03
FIG 3
DCA-17-03 SHOWN
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
SHEET OF
DUST CAP ASSEMBLY
BY:
DCA-17-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CHAD F
11/22/2004
3
3
SHEET SCALE: 1:2
REVISION E
F:\DWG\MISC\MKTG\DCA-17-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
