Datasheet
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Transmission type Photointerrupters Eco-Friendly type
RPI-0352E
Outline
T
opr
30 to 85 °C
Input
(Infrared light
emitting diode)
I
F
35
5
70
Forward current
Reverse voltage
Power dissipation
Storag e t em perature T
stg
40 to 85 °C
I
C
30 mA
Collector dissipation P
C
80 mW
Output
(Phototransistor)
Collector-emitter voltage
Emitter-collector voltage
Collector curr ent
Operating temperat ur e
Parameter
4.5 V
Absolute maximum rati ngs (T
a
= 25°C)
mW
UnitValue
V
R
P
D
V
mA
V
30
V
CEO
V
ECO
Applications
Dimensions (Unit : mm)
Features
Symbol
• Printer s
• Optical Control Equipment
• Amusement
1) Positioning pin r esults in high mounting accuracy
2) Gap3.0m m
1 Unspecified tolerance shall be ±0.2.Note :
3.2
2.5
1
4
4.8 1.3
C0.7
2−C0.2
3.9
5.4
A
A'
4.2
6.4
1
1
2
23
3
4
4
0.5 0.2
+0.05
−0.10
(1.2)
3
2−R1 (Gap)
0.8
(0.4)
0.5
φ1.4
+0
−0.1
φ1
+0
−0.1
(1.2) (0.6)
Internal connection diagram
Cathode
Anode
Emitter
Collector
A-A
OPTICAL
CENTER
1/5 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPI-0352E
1) Input characteristics
Non-coherent Infrared light emitting diode used.
2) Output characteristics
This product is not designed to be protected against eledtromagnetic wave.
3) Transfer characteristics
-
0.4 V
IC =0.1mA
10 -
s
-
10
Response time
Rise time tr -
VCC =5V, IF =10mA
Fall time tf RL=100-
Peak sensitivity wavelength
Collector-emitter
saturation voltage VCE(sat) IF =10mA -
VCE =5V
Collector current ICIF =10mA
Parameter Symbol Conditions
Parameter Symbol Conditions Values Unit
Min.
Electrical and optical characteristics (Ta = 25°C)
IF =10mA
V
Max.
1.4
Typ.
1.2 1.6
IF =10mA
VR =5V --10
A
- 850
nm
p
VCE =10V - 0.5 A
-
- 800 -
-nm
Forward voltage VF
Reverse current IR
Peak light emitting wavelength p
Parameter Symbol Unit
Dark current ICEO
Conditions Values
Min. Typ. Max.
Unit
0.18 0.9 - mA
Values
Min. Typ. Max.
2/5 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPI-0352E
Electrical and opt i cal charact eri st ics curves
0
20
40
60
80
100
120
00.511.522.53 0
20
40
60
80
100
120
0 0.5 1 1.5 2 2.5 3
Fig.1 Relative Output Current vs.Distance (I)
Fig.3 Forward Current Falloff
Relative Collector Current : IC[%]
Forward Current : IF[mA]
Fig.2 Relative Output Current vs.Distance (II)
Distance : d [m m]
Relative Collector Current : IC[%]
Distance : d [m m]
Ambient Tem per ature : Ta[°C]
Fig.4 Power Dissipation / Collector Power Dissipation
vs. Ambient Temperatur e
Power Dissipation /
Collector Power Diss ipation : PD/PC[mW]
Ambient Tem per ature : Ta[°C]
d
d
0
5
10
15
20
25
30
35
40
-40-200 20406080100 0
10
20
30
40
50
60
70
80
90
-40 -20 0 20 40 60 80 100
PC
PD
3/5 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPI-0352E
Electrical and opt i cal charact eri st ics curves
Fig.7 Relative Output vs. Ambient Temperature
Relative Collector Current : IC[%]
Fig.6 Collector Current vs. Forward Current
Collector Curr ent : IC[mA]
Forward Current : IF[mA]
Ambient Tem per ature : Ta[°C]
Fig.5 Forward Current vs. Forward Voltage
Forward Current : IF[mA]
Forward Voltage : VF[V]
0
5
10
15
20
25
30
35
40
00.511.52
25°C
85°C
40°C
0
20
40
60
80
100
120
140
-40-200 20406080
IF=10mA
VCE=5V
0
0.5
1
1.5
2
2.5
0 5 10 15 20
85°C
40°C
25°C
Fig.8 Response Time vs. Collector Current
Collector Curr ent : IC[mA]
Response Time : t [s]
4/5 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPI-0352E
Electrical and opt i cal charact eri st ics curves
Fig.10 Output Characteristics
Collector Curr ent : IC[mA]
Collector to Em itter Voltage : VCE [V]
0
1
2
3
4
5
6
7
0246810
50mA
40mA
30mA
20mA
10mA
IF=
0.0001
0.001
0.01
0.1
1
10
-40-200 20406080
VCE=20V
VCE=30V
VCE=10V
Fig.9 Dark Current vs. Ambient Temperature
Ambient Tem per ature : Ta[°C]
Dark Current : ICEO [A]
5/5 2017.03 - Rev.B
R1102
A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
The information contained herein is subject to change without notice.
Before you use our Products, please contact our sales representative
and verify the latest specifica-
tions :
Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
The Products specified in this document are not designed to be radiation tolerant.
For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
