OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 1 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Description:
The OPIA series optocouplers are d esigned for applications that use an analog output (Phototransistor or
Photodarlington) in a dual-i n-line package. A wide selection of configurations are available. With typical isolation
voltage of 3,750 or 5,000 Volts(RMS), these product meet typical power sy stem isolation requirements.
Theory of operation: The LED transmitt er is u sed to illuminate the Photosensor providing electrical isolation
between two power syste ms while maintaining the ability to transmit information from one power syste m to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and
photosensor configuratio ns are available depending on the system requirements.
The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog
photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
All DIP product is shipped in a shipping tube with “TU” identified on the end of the part number.
Example: OPI4N35DTUE is a 6-Pin DIP shipped in a tube (TU).
.
Features:
• 3,750 or 5,000 Vrms electrical isolation
• Choice of a Single and Dual LED
• Phototransistor or Photodarlington Sensor
• Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
• UL Certification No: E58730
• VDE No: 40026624,40026625
RoHS
Applications:
• High voltage isolation
• PCBoard power system isolation
• Industrial equipment power isolation
• Medical equipment power isolation
• Office equipment
200100*
10
20 ==
−
−
=mA
mA
Curren
t
LED CurrentrPhotosenso
CTR
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 2 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Analog Output Devices Ordering Information
Part Number Isolation Voltage
Max. (Vrms) CTR
Min/Typ/Max Typ. Tr / Tf (µs)
RL = 100 ohms Package Configuration
OPIA4N35D 5,000 60 / - / 600 5 / 4 6 Pin DIP A K—B C E
OPIA5010D 5,000 600 / - / 9,000 60 / 50 6 Pin DIP A K—B C E (Dar)
OPIA3N33D 5,000 500 / 4,000 / - 5 / 60 6 Pin DIP A K—B C E (Dar)
OPIA2210D 5,000 50 / - / 600 2 / 3 6 Pin DIP A K—B C E
OPIA6010D 5,000 50 / - / 600 2 / 3 6 Pin DIP A K, K A—B C E
OPIA2110D 5,000 40 / - / 400 4 / 3 6 Pin DIP A K—C E
Configuration: Definition of Terms
LED Identification—Sensor Id entification
Configuration
Information LED A = Anode K = Cathode
Sensor B = Base C = Collector E = Emitter
Packaging Part Number Suffix: TU = Ship in Tubes Example:
OPI4N35DTUE
Part Number Pin #
1 2 3 4 5 6
OPIA4N35 A K E C B
OPIA5010 A K E C B
OPIA3N33 A K E C B
OPIA2210 A K E C B
OPIA6010 A-K K-A E C B
OPIA2110 A K E C
Symbol Definition Symbol Definition Symbol Definition Symbol Definition
A Anode B Base C Collector E Emitter
Package Outline Dimensions and Schematics: Top-View
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 3 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature -55° C to +125° C
Operating Temperature
OPIA4N35, OPIA5010, OPIA3N33
OPIA2210, OPIA6010, OPIA2110
-30° C to +100° C
-55° C to +125° C
Isolation voltage (1 minute)
5,000 Vrms
Total Package Power Dissipation
200 mW
Lead Soldering Temperature ( 1/16” (1.6 mm) from case for 5 seconds with soldering iron) 260° C
Input Diode
Continuous For ward Curr ent
50 mA
Peak Forward current (1 µs pulse width, 300 pps)
1 A
Reverse Voltage
6 V
Power Dissipation
70 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA4N35, OPIA6010, OPIA2110
OPIA2210
OPIA5010
OPIA3N33
60 V
350 V
300 V
30 V
Emitter-Collector Voltage
OPIA4N35, OPIA2110
OPIA2210, OPIA6010
OPIA5010, OPIA3N33
6 V
7 V
-
Collector Current
OPIA4N35, OPIA2210, OPIA6010, OPIA2110
OPIA5010, OPIA3N33
50 mA
150 mA
Power Dissipation
OPIA4N35, OPIA2110
OPIA5010, OPIA3N33, OPIA2210, OPIA6010
150 mW
200 mW
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 4 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Electrical Characteristics (OPIA6 _ _ Series)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode
VF
Forward Voltage
OPIA4N35, OPIA5010, OPIA3N33,
OPI604, OPIA2110
OPIA2210
-
1.0
1.2
1.2
1.4
1.3
V
IF = 20 mA
IF = 10 mA
VFM
Peek Forward Voltage
OPIA4N35, OPIA5010, OPIA3N33,
OPI604
OPIA2210, OPIA2110
-
-
-
-
3.5
3.0
V
IFM = 500 mA
IR
Reverse Current
OPIA4N35, OPIA5010, OPIA3N33,
OPI604, OPIA2110
OPIA2210
-
-
-
-
10
10
µA
VR = 4 V
VR = 5 V
Ct
Terminal Capacitance
OPIA4N35, OPIA5010, OPIA3N33,
OPI604, OPIA2110
OPIA2210
-
-
30
30
-
-
pf
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1M Hz
Output Phototransistor—OPI4N35D, OPIA2210D, OPIA6010D, OPIA2210D
ICEO Collector dark Current
OPIA4N35, OPIA6010, OPIA2110
OPIA2210
-
-
-
10
100
200
nA
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 300 V
VCEO Collector-emitter Saturation Voltage
OPIA4N35, OPIA6010, OPIA2110
OPIA2210
-
-
0.1
-
0.3
0.4
V
IF = 20 mA, IC = 1 mA
IF = 8 mA, IC = 2.4 mA
fC Cutt-Off frequency - 80 - K Hz
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tR
Rise Time
OPIA4N35, OPIA6010
OPIA2210
OPIA2110
-
-
-
5
2
4
20
-
20
µs
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
tF
Fall Time
OPIA4N35, OPIA6010
OPIA2210
OPIA2110
-
-
-
4
3
3
20
-
20
µs
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
Continued on Next Page
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 5 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Electrical Characteristics (OPIA6 _ _ Series) - Continued from Previous Page
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Output PhotoDarlington—OPIA5010D, OPIA3N33D
ICEO Collector dark Current
OPIA5010
OPIA3N33
-
-
-
-
1.0
0.1
µA
IF = 0 mA, VCE = 200 V
IF = 0 mA, VCE = 10 V
VCEO Collector-emitter Saturation Voltage
OPIA5010
OPIA3N33
-
-
-
-
1.5
1.0
V
IF = 20 mA, IC = 5 mA
IF = 8 mA, IC = 2 mA
fC Cutt-Off frequency
OPIA5010, OPIA3N33
-
7.0
-
K Hz
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tR Rise Time
OPIA5010
OPIA3N33
-
-
60
5
300
40
µs
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 10 V, IC = 50 mA, RL = 100 Ω
tF Fall Time
OPIA5010
OPIA3N33
-
-
50
60
250
100
µs
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 10 V, IC = 50 mA, RL = 100 Ω
Coupled Characteristics—OPIA6XXX Series
CTR
Current Transfer Ratio
OPIA4N35
OPIA5010
OPIA3N33
OPIA2210
OPIA6010
OPIA2110
60
600
500
50
60
40
-
-
4,000
-
-
-
600
9,000
-
600
600
400
%
IF = 2 mA, VCE = 5.0 V
IF = 2 mA, VCE = 5.0 V
IF = 10 mA, VCE = 10.0 V
IF = 5 mA, VCE = 5.0 V
IF = 1 mA, VCE = 5.0 V
IF = 10 mA, VCE = 5.0 V
Cf Floating Capacitance - 0.6 1.0 pF V = 0.0 V, f = 1M Hz
RISO Isolation resistance 5X1010 1011 - ohm DC500V
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 6 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPI4N35
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 7 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPI4N35
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 8 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA5010
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 9 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA5010
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 10 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA3N33
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 11 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA3N33
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 12 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA2210
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 13 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA2210
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 14 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA6010
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 15 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA6010
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 16 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA2210
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 17 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
OPIA2210
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 9/09
Page 18 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Quality / Reliability Requirements
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Parameter Failure Criteria Conditions
HTRB D IC(OFF) ± 10% 11 samples after 500Hrs
0 Fail @ VCE = 5.0VDC, Ta = 70°C
HTFB D IC(ON) ± 10% 50 samples after 96Hrs
0 Fail @ Max PD, Ta = 25°C
MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC
Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020 B
Lead Solderability 0 Fail per Method 208 of MIL-STD-202.
Glass Transition of body 125°C Min. DSC test method
Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo
Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E
High Temperature Storage ± 20% 85°C, 500Hrs
Autoclave 0 Fail
TA = 121°C, Pressure = 15psi, Humidit y
= 100%, Time = 96Hrs
Label Identification
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week n umber of
manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD
is the day of the year of manufacture. – or use equivalent label format.
Carrollton, TX, USA
MADE IN TAIWAN
OPTEK P/N __OPI4N35D-TU__
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.4 9/09
Page 19 of 19
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA4N35, OPIA5010, OPIA4N33
OPIA2110, OPIA2210, OPI6010
DIP Package
Packaging Information:
Quantity: 6-pin: 65pcs/tube
Tube Packaging Specifications (TU):
Optek's Optocoupler
Part Numbers Packaging
Quantities
Tube Inner Small Carton Medium Carton Large Carton
Qty Weight
52 x 7 x 7.5
cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm
Qty Weight Qty Weight
Gross
Weight Qty Weight
Gross
Weight Qty Weight
Gross
Weig
ht
P/H
and
SMD
4-PIN
OPIA400D/A, OPIA410D/A -
OPIA413D/A 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5
6-PIN
OPIA6XXD/A Series 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0
8-PIN
OPIA8XXD Series and OPID804D 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5
M/F
SOP
4-PIN and 5-PIN
OPIA401B - OPIA404B, OPIA414B,
OPIA500B 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0
SSOP 4-PIN
OPIA405C - OPIA409C 170 -- 10,200 --
P/H = Pin-Hol e Packages (Referred as D = Dual-In-Line Package)
SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD)
M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil Lead -
Spacing)
SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing)
