PHOTOCOUPLER PS2501-1,-4,PS2501L-1,-4 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES -NEPOC Series- DESCRIPTION The PS2501-1, -4 and PS2501L-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2501-1, -4 are in a plastic DIP (Dual In-line Package) and the PS2501L-1, -4 are lead bending type (Gullwing) for surface mount. FEATURES * High isolation voltage (BV = 5 000 Vr.m.s.) * High collector to emitter voltage (VCEO = 80 V) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) PIN CONNECTION (Top View) PS2501-1, PS2501L-1 4 3 * Ordering number of tape product: PS2501L-1-F3: 2 000 pcs/reel 1. Anode 2. Cathode 3. Emitter 4. Collector * Safety standards * UL approved: No. E72422 1 2 PS2501-4, PS2501L-4 APPLICATIONS 16 15 14 13 12 11 10 9 * Power supply * Telephone/FAX. * FA/OA equipment 1 * Programmable logic controller 2 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector Document No. PN10225EJ05V0DS (5th edition) Date Published February 2010 NS The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS2501-1,-4,PS2501L-1,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type PS2501-1 PS2501-4 4.60.35 3 1 2 19.80.5 16 9 1 8 6.50.5 6.50.5 4 0 to 15 +0.1 0.25 -0.05 1.250.15 3.50.3 3.20.4 4.150.4 7.62 3.50.3 3.20.4 4.150.4 7.62 0 to 15 +0.1 0.25 -0.05 0.500.10 1.250.15 0.500.10 0.25 M 0.25 M 2.54 2.54 Lead Bending Type PS2501L-1 PS2501L-4 4.60.35 3 1 2 19.80.5 16 9 1 8 0.90.25 9.600.4 1.250.15 0.25 M 2.54 1.250.15 0.25 M 2.54 0.15 PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 3.5 mm Isolation Distance 0.3 mm 2 Data Sheet PN10225EJ05V0DS 0.15 0.1 +0.1 -0.05 0.25 +0.1 -0.05 3.50.3 0.1 +0.1 -0.05 0.25 +0.1 -0.05 6.50.5 6.50.5 4 3.50.3 0.90.25 9.600.4 PS2501-1,-4,PS2501L-1,-4 MARKING EXAMPLE PS2501-1 PS2501-4 No. 1 pin Mark No. 1 pin Mark 2501 MJ031 M J Assembly Lot 0 31 N Pb-Free Pb-Free and Halogen Free J Country Assembled Type Number Assembly Lot 0 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package PS2501-4 NJ031 Made in Japan Made in Taiwan New PKG J K New PKG R Y Package New PKG Made in Japan J *1 *1 Special version Data Sheet PN10225EJ05V0DS 3 PS2501-1,-4,PS2501L-1,-4 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Specification Pb-Free Approval PS2501-1 PS2501-1-A Magazine case 100 pcs PS2501L-1 PS2501L-1-A PS2501L-1-F3 PS2501L-1-F3-A Embossed Tape 2 000 pcs/reel PS2501-4 PS2501-4-A Magazine case 20 pcs PS2501L-4 PS2501L-4-A PS2501-1 PS2501-1Y-A Special version PS2501L-1 PS2501L-1Y-A (Pb-Free and PS2501L-1-F3 PS2501L-1Y-F3-A Halogen Free) Standard products Number PS2501-1 (UL approved) Magazine case 100 pcs PS2501-4 Standard products (UL approved) Embossed Tape 2 000 pcs/reel *1 For the application of the Safety Standard, following part number should be used. 4 Application Part Data Sheet PN10225EJ05V0DS PS2501-1 *1 PS2501-1,-4,PS2501L-1,-4 ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, TA = 25C) Ratings Parameter Diode Symbol PS2501-4, PS2501L-4 Unit Reverse Voltage VR 6 V Forward Current (DC) IF 80 mA/ch Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2501-1, PS2501L-1 *1 PD/C 1.5 1.2 mW/C PD 150 120 mW/ch IFP 1 A/ch Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA/ch Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 PC/C 1.5 1.2 mW/C PC 150 120 mW/ch BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2501-1, PS2501L-1). Pins 1-8 shorted together, 9-16 shorted together (PS2501-4, PS2501L-4). Data Sheet PN10225EJ05V0DS 5 PS2501-1,-4,PS2501L-1,-4 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Transistor Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz ICEO VCE = 80 V, IF = 0 mA CTR IF = 5 mA, VCE = 5 V VCE (sat) IF = 10 mA, IC = 2 mA Collector to Emitter Dark MIN. TYP. MAX. Unit 1.17 1.4 V 5 A 50 pF 100 nA 600 % 0.3 V Current Coupled Current Transfer Ratio 80 300 *1 (IC/IF) Collector Saturation Voltage Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time Fall Time *2 10 VCC = 10 V, IC = 2 mA, RL = 100 tf 11 0.5 pF 3 s 5 *1 CTR rank ( * : only PS2501-1, PS2501L-1) <R> K* : 300 to 600 (%) L* : 200 to 400 (%) M* : 80 to 240 (%) D* : 100 to 300 (%) H* : 80 to 160 (%) W* : 130 to 260 (%) Q* : 100 to 200 (%) N : 80 to 600 (%) *2 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 Input ton 50 VOUT RL = 100 td toff ts 90% Output 10% tr 6 Data Sheet PN10225EJ05V0DS tf PS2501-1,-4,PS2501L-1,-4 TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = 25C) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2501-1 PS2501L-1 100 PS2501-4 PS2501L-4 1.5 mW/C 50 1.2 mW/C 0 25 50 75 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 100 125 150 100 PS2501-4 PS2501L-4 1.2 mW/C 0 150 25 75 50 100 125 150 Ambient Temperature TA (C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 70 50 TA = +100C +60C +25C 60 Collector Current IC (mA) Forward Current IF (mA) 1.5 mW/C 50 Ambient Temperature TA (C) 10 5 0C -25C -50C 1 0.5 50 40 50 30 mA 20 mA A m 10 20 IF = 5 mA 10 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA 10 mA 10 000 VCE = 80 V 40 V 24 V 10 V 5V 1 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) PS2501-1 PS2501L-1 100 10 1 - 50 -25 0 25 50 75 100 10 2 mA IF = 1 mA 1 0.5 0.1 0 Ambient Temperature TA (C) Remark 5 mA 5 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10225EJ05V0DS 7 PS2501-1,-4,PS2501L-1,-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.2 450 VCE = 5 V 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V 0.2 0 -50 -25 0 25 50 75 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 400 350 Sample A B C D 300 250 200 150 100 50 0 100 0.05 0.1 1 5 10 50 Forward Current IF (mA) Ambient Temperature TA (C) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 50 1 000 IC = 2 mA, VCC = 10 V, CTR = 290% tf IF = 5 mA, VCC = 5 V, CTR = 290% tf tr 10 Switching Time t ( s) Switching Time t ( s) 0.5 td ts 1 ts 100 10 tr 0.1 10 50 100 1 100 5 k 10 k 500 1 k Load Resistance RL () LONG TERM CTR DEGRADATION -5 100 -15 RL = 1 k IF = 5 mA 1.0 CTR (Relative Value) Normalized Gain GV 50 k 100 k 1.2 IF = 5 mA, VCE = 5 V -10 5 k 10 k Load Resistance RL () FREQUENCY RESPONSE 0 td 500 1 k 0.8 TA = 25C 0.6 TA = 60C 0.4 0.2 -20 300 0.5 1 2 5 10 20 50 100 200 500 Frequency f (kHz) Remark 8 0 102 103 Time (Hr) The graphs indicate nominal characteristics. Data Sheet PN10225EJ05V0DS 104 105 PS2501-1,-4,PS2501L-1,-4 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2501L-1-F3 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel Data Sheet PN10225EJ05V0DS 15.9 to 19.4 Outer edge of flange 9 PS2501-1,-4,PS2501L-1,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 10 Data Sheet PN10225EJ05V0DS PS2501-1,-4,PS2501L-1,-4 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10225EJ05V0DS 11 PS2501-1,-4,PS2501L-1,-4 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas 8. Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. NOTE 1: "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters * 4590 Patrick Henry Drive, Santa Clara, CA 95054 * Phone (408) 919-2500 * www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus