IS-1009RH 2.5V Reference Page 1 of 2 IS-1009RH Printer Friendly Version 2.5V Reference Datasheets, Related Docs & Simulations Description Key Features Parametric Data Application Diagrams Related Devices Ordering Information iBuy direct from Intersil iBuy direct - out of stock Check distributor inventory Part No. Request samples Available in RoHS/Pb-Free DesignIn Status Temp. Package MSL SMD/VID Price US $ Die (Military Visual) N/A 5962F0052301V9A Contact Us Mil 3 Ld Can N/A 5962F0052301QXC Contact Us Active Mil 3 Ld Can N/A 5962F0052301VXC Contact Us ISYE-1009RH-8 Active Mil 3 Ld CLCC N/A 5962F0052301QYC Contact Us ISYE-1009RH-Q Active Mil 3 Ld CLCC N/A 5962F0052301VYC Contact Us ISYE-1009RHQS9000 Active Mil 3 Ld CLCC N/A 5962F0052301VYC Contact Us IS0-1009RH-Q Active IS2-1009RH-8 Active IS2-1009RH-Q The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 SMD/VID = Standard Microcircuit Drawing/Vendor Item Drawing Description IS-1009RH is a 2.5V shunt regulator diode designed to provide a stable 2.5V reference over a wide current range. The device is exceptionally stable over a wide current range and is designed to maintain stability over the full miitary temperature range and over time. It operates and is specified at a lower minimum current than other 1009 types. The 0.2% reference tolerance is achieved by on-chip trimming. An adjustment terminal is provided to allow for the calibration of system errors. The use of this terminal to adjust the reference voltage does not effect the temperature coefficient. Constructed with the Intersil dielectrically isolated EBHF process, these devices are immune to Single Event Latch-up and have been specifically designed to provide highly reliable performance in harsh radiation environments. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-00523. A "hot-link" is provided on our homepage for downloading. www.intersil.com/spacedefense/space.htm Key Features Electrically Screened to SMD # 5962-00523 QML Qualified per MIL-PRF-38535 Requirements Radiation Environment Total Dose 300 krad(Si) (Max) Latch-up Immune Dielectrically Isolated Reverse Breakdown Voltage (VZ) 2.5V Change in VZ vs. Current (400A to 10mA) 6mV Change in VZ vs. Temp (-55C to 125C) 15mV Max Reverse Breakdown Current 20mA Device is tested with 10F shunt capacitance connected from V+ to V-, which provides optimum stability Interchangeable with 1009 and 136 Industry Types Related Documentation Datasheet(s): Radiation Hardened 2.5V Reference SMD Datasheet(s): SMD for IS-1009RH Technical Homepage: Space/Defense ICs SEE Test Report(s): Single Event Effects Testing of the IS-1009RH Voltage Reference ELDRS Test Report(s): Low Dose Rate Testing of the Intersil IS1009RH Hardened Voltage Reference http://www.intersil.com/products/deviceinfo.asp?pn=IS-1009RH 10/26/2009 IS-1009RH 2.5V Reference Page 2 of 2 Parametric Data DSCC SMD Class High Dose Rate (HDR) rad(Si) Low Dose Rate (ELDRS) SEL MeV/mg/cm2 5962-00523 V, Q, /PROTO 300 Report Available SEL free Application Block Diagrams Actel FPGAs (Space) Satellite Power Management Applications Power Supply Monitoring Reference for 5V Systems A/D and D/A Reference About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet (c)2003-2009. Intersil Americas Inc. All rights reserved. http://www.intersil.com/products/deviceinfo.asp?pn=IS-1009RH 10/26/2009