April 1999
SEMICONDUCTORS
SELECTION
GUIDE
RF and Microwave Devices 7
Microcomputer 1
IC Memory 2
Semi-Custom IC 3
Transistor/Diode/Thyristor 6
General Purpose Linear IC 5
Particular Purpose 4
Optical Device 8
Index 9
D2BGA, EEPROM,
emlC-17K
, FIP, FPBGA, IEBus, OCMOS FET, OPENCAD,
SIMPLEHOST
, VISTASL, V20HL, V30HL, V30MT,
V30MX, V30MZ, V30MZC, V800 Series, V810 family, V830 family, V850 family, V821, V831, V832, V851, V852, V853, V854,
V850E/MS1, V850/SA1, V850/SB1, V850/SB2, VR Series, VR4100 Series, VR4300 Series, VR4100, VR4101, VR4102, VR4111,
VR4120, VR4121, VR4300, VR4305, VR4310, VR5000, VR5432, VR5464, VR10000, VR12000 are the trademarks of NEC
Corporation.
JAVA and all the trademarks and logotypes related to JAVA are either trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or other countries.
MS-DOS, Microsoft, Windows and WindowsNT are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Rambus, RDRAM and the Rambus Logo are registered trademarks of Rambus Inc.
DirectRambus, DirectRDRAM, RIMM, RModule and RSocket are trademarks of Rambus Inc.
PC/AT and PC DOS are trademarks of IBM Corporation.
Pentium is a trademark of Intel Corporation.
SPARCstation is a trademark of SPARC International, Inc.
TrueSpeech is a trademark of DSP Group, Inc.
Z80 is a trademark of ZILOG.
µ
BGA is a trademark of Tessera, Inc.
TRON is short for the Realtime Operating System Nucleus.
ITRON is short for Industrial TRON.
The export of these products from Japan is regulated by the Japanese government. The export of some or all of
these products may be prohibited without governmental license. To export or re-export some or all of these
products from a country other than Japan may also be prohibited without a license from that country. Please call
an NEC sales representative.
Exporting VR Series or equipment that includes these products may require a governmental license from the U.S.A. for
some countries because these products utilizes technologies limited by the export control regulations of the U.S.A.
•The information in this document is based on documents issued in February, 1999 at the latest. The
information is subject to change without notice. For actual design-in, refer to the latest publications of
data sheet, etc., for the most up-to-date specifications of the device.
•Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
•No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
•NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
•Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
•While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
•NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated “quality assurance program“ for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
M8D 98.12
The
µ
PD754144, 754244, 754264, 75F4264, 789196AY, 789197AY, 78F9197AY, 789216AY, 789217AY,
78F9217AY, 780973, 78F0974, 780949, 78F0949 are manufactured and sold in accordance with the license
agreement with CP8 Transac pertinent to the patent of microcomputers with on-chip EEPROM.
Note that this product can not be used for the IC card (SMART CARD).
Caution: The I2C bus interface circuit is incorporated in the
µ
PD17709 subseries, 17719 subseries, 178018A
subseries, 178048 subseries, 178078 subseries, 178098 subseries, 780018AY subseries, 780024AY
subseries, 780034AY subseries, 780058Y subseries, 780078Y subseries, 78018FY subseries, 780308Y
subseries, 78054Y subseries, 78058FY subseries, 78064Y subseries, 780701Y subseries, 78078Y
subseries, 780833Y subseries, 784038Y subseries, 784216Y subseries, 784218Y subseries, 784225Y
subseries, 784928Y subseries, 789197AY subseries, 789217AY subseries,
µ
PD17001, 17P001, 17003A,
17005, 17P005, 17010, 17P010, 703008Y, 70F3008Y, 703015Y, 703017Y, 70F3017Y, 703033Y,
70F3033Y, 70F3035Y, 78070AY,
µ
PC1851B, 1853, 1854A, 1857A, 1884,
µ
PD61882, 6221, 6222 and
72254Y.
Those who use the I2C bus interface can be granted the license below by giving prior notification before
ordering the custom code.
Purchase of NEC I2C components conveys a license under the Philips I2C Patent Rights to use these
components in an I2C system, provided that the system conforms to the I2C Standard Specification as
defined by Philips.
[MEMO]
Table of Contents
1. Microcomputer ....................................... 1
4-Bit Single-Chip Microcontroller .................... 2
• 75XL Series .............................................. 2
• 17K Series ................................................ 13
•
µ
PD6133, 6604, 63 Series ...................... 20
8-Bit Single-Chip Microcontroller .................... 22
• 178K Series .............................................. 22
• 78K/0S Series........................................... 26
• 78K/0 Series ............................................. 41
16-Bit Single-Chip Microcontroller.................. 80
• 78K/IV Series ........................................... 80
32-Bit Microprocessor ..................................... 97
• V810 FamilyTM, V830 FamilyTM ................. 98
32-Bit Single-Chip Microcontroller .................. 99
• V850 FamilyTM ........................................... 99
64-Bit Microprocessor ..................................... 105
•VR SeriesTM ............................................... 105
Development Tools.......................................... 107
Middleware....................................................... 134
2. IC Memory .............................................. 137
Dynamic RAM.................................................. 138
Dynamic RAM Module..................................... 142
Static RAM....................................................... 146
Mask ROM ....................................................... 151
COMBO Memory ............................................. 152
Flash MEMORY............................................... 152
MCP (Flash Memory + SRAM) ....................... 153
Other ................................................................ 153
• Field/Line Buffer ....................................... 153
3. Semi-Custom IC ..................................... 155
NEC’s ASICs ................................................... 156
0.25
µ
m ASIC .................................................. 166
Gate Array........................................................ 172
• CMOS Gate Array .................................... 176
• BiCMOS Gate Array................................. 195
Cell-Based IC................................................... 200
Embedded Array.............................................. 217
Analog Master.................................................. 220
Mixed Signal ASIC .......................................... 223
4. Particular Purpose IC ............................ 239
DSP .................................................................. 240
CCD Linear Image Sensor.............................. 243
Communication IC ........................................... 245
Mass Storage IC.............................................. 250
Global Positioning System IC ......................... 251
Display IC......................................................... 251
Intelligent Power MOS LSI.............................. 254
Power Switch for USB Application ................. 255
Image IC .......................................................... 255
MPEG IC.......................................................... 256
Audio IC ........................................................... 257
TV IC ................................................................ 259
Multisync Monitor IC........................................ 262
Digital Image IC............................................... 263
On-Screen Character Display IC .................... 265
Video Camera IC............................................. 265
Remote Control IC........................................... 266
Clock IC ........................................................... 266
Rotary Encoder IC........................................... 266
A/D Converter IC ............................................. 267
D/A Converter IC ............................................. 267
Line Driver Receiver IC................................... 267
5. General Purpose Linear IC ................... 269
Operational Amplifier....................................... 270
Comparator ...................................................... 271
Fixed Output Voltage, 3-Terminal Regulator ... 271
Variable Output Voltage Regulator................. 272
Regulator with System Reset ......................... 272
Regulator with ON/OFF Function ................... 272
High Precision Reference Voltage ................. 273
Switching Regulator Control Circuit ............... 273
Functional Block .............................................. 274
6. Transistor/Diode/Thyristor ..................... 275
Transistor ......................................................... 276
• Quick Reference by Package .................. 276
• Quick Reference Table by
Function/Application................................. 286
– i –
Field Effect Transistor ..................................... 292
• Small Signal FET ..................................... 292
• Power MOS FET ...................................... 295
Transistor with Internal Resistor..................... 309
Transistor for Array ......................................... 314
Transistor Array ............................................... 315
Zener Diode ..................................................... 317
Noise Clipping Diode....................................... 319
Thyristor ........................................................... 321
7. RF and Microwave Devices .................. 323
IC ...................................................................... 324
• AGC AMP. (
µ
PC××××,
µ
PG××××) ........... 324
• IQ Modulator/Demodulator (
µ
PC××××).... 324
• Up Converter (
µ
PC××××) ......................... 324
• Prescaler (
µ
PB××××,
µ
PG××××) .............. 325
• Down Converter (
µ
PC××××)..................... 326
• PLL Synthesizer (
µ
PB××××) .................... 327
• Switch (
µ
PG××××) .................................... 327
•
Wide Band AMP.
(
µ
PC××××,
µ
PG××××)... 328
• Driver AMP. (
µ
PG××××) ........................... 330
• Power AMP. (
µ
PG××××, MC-××××) ......... 330
• Transistor Array (
µ
PA×××) ....................... 330
• Typical Characteristics............................. 331
Discrete ............................................................ 335
• Dual Gate MES/MOS FET....................... 335
• Low Noise BIP. TR. (2SC, NE) ............... 336
• Twin TR. (
µ
PA×××)................................... 338
• Low Noise GaAs/HJ FET (NE) ................ 339
• Power TR./FET (2SC, NE, NEL,
NEM, NES, NEZ)...................................... 341
• Cross-reference Table ............................. 344
Application ....................................................... 351
8. Optical Device ........................................ 359
Photocoupler.................................................... 360
• Tr. Output Type ........................................ 360
• IC Output Type ......................................... 369
• Safety Standards Approval List
(Made in Japan, as of January 1999) ..... 370
• Safety Standards Approval List
(Made in Taiwan, as of January 1999) ... 372
OCMOS FETTM (Opto-Coupled MOS FET
Relay)............................................................... 373
• Safety Standards Approval List
(as of January 1999)................................ 377
– ii –
Infrared Transceivers ...................................... 378
Plastic Fiber Link ............................................. 378
Visible Lasers .................................................. 380
Fiberoptic Devices........................................... 380
• Lasers (Digital) ......................................... 380
• Pump Laser .............................................. 381
• Pulsed Lasers for OTDR.......................... 381
• Detectors................................................... 382
9. Index ....................................................... 383
1
Microcomputer
Selection Guide X10679EJHV0SG00 1
4-Bit Single-Chip Microcontroller ................................ 2
• 75XL Series ................................................................ 2
• 17K Series .................................................................. 13
•
µ
PD6133, 6604, 63 Series......................................... 20
8-Bit Single-Chip Microcontroller ................................ 22
• 178K Series ................................................................ 22
• 78K/0S Series............................................................. 26
• 78K/0 Series ............................................................... 41
16-Bit Single-Chip Microcontroller .............................. 80
• 78K/IV Series............................................................. 80
32-Bit Microprocessor ................................................... 97
• V810 FamilyTM, V830 FamilyTM .................................. 98
32-Bit Single-Chip Microcontroller .............................. 99
• V850 FamilyTM............................................................. 99
64-Bit Microprocessor ................................................... 105
•V
R SeriesTM.................................................................. 105
Development Tools ........................................................ 107
Middleware ...................................................................... 134
Microcomputer
4-Bit Single-Chip Microcontroller
2Selection Guide X10679EJHV0SG00
75XL Series
■ 75XL Series Products Product Evolution
Products with
internal PROM
36-pin General-purpose
42-pin General-purpose dual clock
42-pin A/D dual clock
20-pin EEPROM
: Under development
80-pin 80 segment + A/D
80-pin 128 segment
64-pin 96 segment
48-pin 48 segment
42-pin 96 segment
★
For key-less entry
★
Products with on-chip LCD
General-purpose products
PD754304
µ
PD754302
µ
PD750108
µ
PD750106
µ
PD750104
µ
PD750008
µ
PD750006
µ
PD750004
µ
PD750068
µ
PD750066
µ
PD750064
µ
PD754264
µ
PD754244
µ
PD754144
µ
PD754202
µ
PD753017A
µ
PD753016A
µ
PD753012A
µ
PD753108
µ
PD753106
µ
PD753104
µ
PD753208
µ
PD753206
µ
PD753204
µ
PD753304
µ
PD753036
µ
PD75P4308
µ
PD75P0116
µ
PD75P0016
µ
PD75P0076
µ
PD75F4264
µ
PD75P3018A
µ
PD75P3116
µ
PD75P3216
µ
PD75P3036
µ
★
Microcomputer
4-Bit Single-Chip Microcontroller
Selection Guide X10679EJHV0SG00 3
75XL Series
■ General-Purpose 42-pin (1/2)
512
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 122
µ
s (with 32.768 kHz subsystem clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 2.2 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Can drive LED
On-chip pull-up resistors are connectable by software
Can drive LED, 13 V withstand voltage
Pull-up resistors can be incorporated by mask option
• 8-bit timer/event counter × 1 channel
• Basic interval timer/watchdog timer × 1 channel
• Watch timer × 1 channel
• 8-bit timer × 1 channel
Any of three modes can be used:
• 3-wire serial I/O mode: MSB/LSB switchable
•2-wire serial I/O mode
•SBI mode External: 3, Internal: 4
External: 1, Internal: 1
•Φ, 524 kHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
•Φ, 750 kHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz (with 4.19 MHz main system clock, or 32.768 kHz subsystem clock)
• 2.93 kHz, 5.86 kHz, 46.9 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 2.2 to 5.5 V (VDD = 1.8 to 5.5 V with external clock)
• 42-pin plastic shrink DIP (600 mil)
• 44-pin plastic QFP (10 × 10 mm)
Assembler, IE controller, device file, in-circuit emulator
VCRs, CD players, cordless telephones, radios, cameras, home electric appliances, etc.
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
N-ch open-drain I/O
Timer
Serial interface
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
4 channels
34
8
18
8
µ
PD750004
4096
(Mask ROM)
µ
PD750006
6144
(Mask ROM)
µ
PD750008
8192
(Mask ROM)
µ
PD75P0016
16384
(One-time PROM)
Part number
I/O port
Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
Microcomputer
4-Bit Single-Chip Microcontroller
4Selection Guide X10679EJHV0SG00
34
8
18
8
4 channels
I/O port
75XL Series
■ General-Purpose 42-pin (2/2)
µ
PD750104
µ
PD750106
µ
PD750108
µ
PD75P0116
4096 6144 8192 16384
(Mask ROM) (Mask ROM) (Mask ROM) (One-time PROM)
512
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 2
µ
s, 4
µ
s, 8
µ
s, 32
µ
s (with RC 2.0 MHz main system clock)
• 4
µ
s, 8
µ
s, 16
µ
s, 64
µ
s (with RC 1.0 MHz main system clock)
• 122
µ
s (with 32.768 kHz subsystem clock)
2
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Can drive LED
On-chip pull-up resistors are connectable by software
Can drive LED, 13 V withstand voltage
Pull-up resistors can be incorporated by mask option
• 8-bit timer/event counter × 1 channel
• Basic interval timer/watchdog timer × 1 channel
• Watch timer × 1 channel
• 8-bit timer × 1 channel
Any of three modes can be used:
• 3-wire serial I/O mode: MSB/LSB switchable
• 2-wire serial I/O mode
• SBI mode External: 3, Internal: 4
External: 1, Internal: 1
Φ, 125 kHz, 62.5 kHz, 15.6 kHz (with 1.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz (with 32.768 kHz subsystem clock)
• 0.49 kHz, 0.98 kHz, 7.81 kHz (with 1.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
• 42-pin plastic shrink DIP (600 mil)
• 44-pin plastic QFP (10 × 10 mm)
Assembler, IE controller, device file, in-circuit emulator
VCRs, CD players, cordless telephones, radios, cameras, home electric appliances, etc.
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
N-ch open-drain I/O
Timer
Serial interface
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
Part number
Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
Microcomputer
4-Bit Single-Chip Microcontroller
Selection Guide X10679EJHV0SG00 5
75XL Series
■ General-Purpose 42-pin (A/D)
512
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 122
µ
s (with 32.768 kHz subsystem clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Also used for analog input pins: 4
Can drive LED
On-chip pull-up resistors are connectable by software
Also used for analog input pins: 4
Can drive LED, 13 V withstand voltage
Pull-up resistors can be incorporated by mask option
• 8-bit timer/event counter: 2 channels (Usable as 16-bit timer/event counter)
• Basic interval timer/watchdog timer: 1 channel
• Watch timer: 1 channel
Any of two modes can be used:
• 3-wire serial I/O mode (MSB/LSB switchable)
• 2-wire serial I/O mode
8-bit resolution × 8 channels
External: 3, Internal: 4
External: 1, Internal: 1
•Φ, 1.05 MHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
•Φ, 1.5 MHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz (with 4.19 MHz main system clock, or 32.768 kHz subsystem clock)
• 2.93 kHz, 5.86 kHz, 46.9 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/oprations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
• 42-pin plastic shrink DIP (600 mil, 1.778-mm pitch)
• 42-pin plastic shrink SOP (375 mil, 0.8-mm pitch)
Assembler, IE controller, device file, in-circuit emulator
Cordless telephones, AV equipment, home electric appliances, OA equipment, health equipment,
meters, gas tables, etc.
µ
PD750064
4096
(Mask ROM)
µ
PD750066
6144
(Mask ROM)
µ
PD750068
8192
(Mask ROM)
µ
PD75P0076
16384
(One-time PROM)
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
N-ch open-drain I/O
Timer
Serial interface
A/D converter
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
4 channels
32
12
12
8
Part number
I/O port
Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
Microcomputer
4-Bit Single-Chip Microcontroller
6Selection Guide X10679EJHV0SG00
75XL Series
■ General-Purpose 36-pin
µ
PD754302
2048
(Mask ROM)
µ
PD754304
4096
(Mask ROM)
µ
PD75P4308
8192
(One-time PROM)
256
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Can drive LED
On-chip pull-up resistors are connectable by software
Can drive LED, 13 V withstand voltage
Pull-up resistors can be incorporated by
mask option 8-bit timer/event counter × 2 channels
(usable as 16-bit timer/event counter)
Basic interval timer/watchdog timer × 1 channel
Either of two modes can be used:
• 3-wire serial I/O mode: MSB/LSB switchable
• 2-wire serial I/O mode
External: 3, Internal: 4
External: 1
• Φ, 524 kHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
• Φ, 750 kHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
• 36-pin plastic shrink SOP (300 mil, 0.8-mm pitch)
Assembler, IE controller, device file, in-circuit emulator
Cordless telephones, TVs, VCRs, audio equipment, home electric appliances, OA equipment,
etc.
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
N-ch open-drain I/O
Timer
Serial interface
Vectored interrupt
Test input
Clock output (PCL)
Instruction set
Power supply voltage
Package
Development tools
Applications
3 channels
30
8
18
4
Part number
I/O port Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
Microcomputer
4-Bit Single-Chip Microcontroller
Selection Guide X10679EJHV0SG00 7
75XL Series
■ Keyless Entry
µ
PD754202
4096
(Mask ROM)
128
—16 32
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, • 4
µ
s, 8
µ
s, 16
µ
s, 64
µ
s
•0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s
15.3
µ
s (with 4.19 MHz (with 1 MHz system
(with 4.19 MHz system clock)
System clock) clock)
•0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s,
(with 6.0 MHz system clock)
10.7
µ
s (with 6.0 MHz
System clock)
• 0.67
µ
s2
µ
s
•0.67
µ
s (VDD = 2.7 to 6.0 V)
(VDD = 2.7 to 6.0 V) (VDD = 1.8 to 6.0 V)
•0.95
µ
s (VDD = 1.8 to 6.0 V)
• 0.95
µ
s
(VDD = 1.8 to 6.0 V)
Pull-up resistors can be incorporated by mask option
Can drive LED
On-chip pull-up resistors are connectable by software
RC oscillator
(external resistors Crystal/ceramic oscillator
and capacitors)
• 8-bit timer counter: 3 channels (Usable as 16-bit timer counter or remote
controller signal carrier generator)
• Basic interval timer/watchdog timer: 1 channel
— 4-bit resolution × 2—
— 8-bit resolution × 2
Key return reset function
External: 1, internal: 5
External: 1
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 6.0 V
• 20-pin plastic SOP (300 mil, 1.27-mm pitch) 20-pin plastic SOP
• 20-pin plastic shrink SOP (300 mil, 0.65-mm pitch) (300 mil, 1.27-mm pitch)
Assembler, IE controller, device file, in-circuit emulator
Keyless entries, data carriers
2048
(Mask ROM)
ROM (bytes)
RAM (× 4 bits)
EEPROMTM (bytes)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
Systrem clock oscillator
Timer
Programmable threshold port
A/D converter
Others
Vectored interrupt
Test input
Instruction set
Power supply voltage
Package
Development tools
Applications
4 channels
13 4
9
Part number
I/O port
4096
(Flash memory)
Crystal/ceramic
oscillator
No on-chip pull-up
resistors
★: Under development
µ
PD754144
µ
PD754244
µ
PD754264
µ
PD75F4264★
Microcomputer
4-Bit Single-Chip Microcontroller
8Selection Guide X10679EJHV0SG00
75XL Series
■ LCD-Driver 80-pin
1024
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 122
µ
s (with 32.768 kHz subsystem clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Can drive LED
On-chip pull-up resistors are connectable by software
Also used for segment pins
Can drive LED, 13 V withstand voltage
Pull-up resistors can be incorporated by mask option
• Number of segments selectable: 24/28/32 segments
(switchable to CMOS ports in multiples of 4: 8 maximum)
• Selectable display mode: Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias),
1/3 duty (1/3 bias), 1/4 duty (1/3 bias)
Voltage divider resistors for
LCD drive can be incorporated by mask option
• 8-bit timer/event counter: 3 channels (usable as 16-bit timer/event counter or
remote-controller signal carrier generator)
• Basic interval timer/watchdog timer × 1 channel
• Watch timer × 1 channel
Any of three modes can be used:
• 3-wire serial I/O mode: MSB/LSB switchable
• 2-wire serial I/O mode
• SBI mode External: 3, Internal: 5
External: 1, Internal: 1
•Φ, 524 kHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
•Φ, 750 kHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz (with 4.19 MHz main system clock, or with 32.768 kHz
subsystem clock)
• 2.93 kHz, 5.86 kHz, 46.9 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
• 80-pin plastic QFP (14 × 14 mm)
• 80-pin plastic TQFP (fine pitch) (12 × 12 mm)
Assembler, IE controller, device file, in-circuit emulator
Camcorders, CD players, telephones, cameras, pagers, remote controllers, etc.
µ
PD753017A
24576
(Mask ROM)
µ
PD75P3018A
32768
(One-time PROM)
No on-chip voltage divider
resistors for LCD drive
µ
PD753012A
12288
(Mask ROM)
µ
PD753016A
16384
(Mask ROM)
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
CMOS I/O
N-ch open-drain I/O
LCD controller/driver
Timer
Serial interface
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
5 channels
40
8
16
8
8
Part number
I/O port
Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
Microcomputer
4-Bit Single-Chip Microcontroller
Selection Guide X10679EJHV0SG00 9
µ
PD753104
4096
(Mask ROM)
µ
PD75P3116
16384
(One-time PROM)
75XL Series
■ LCD-Driver 64-pin
512
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 122
µ
s (with 32.768 kHz subsystem clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Can drive LED
On-chip pull-up resistors are connectable by software
Also used for segment pins
Can drive LED, 13 V withstand voltage
P
ull-up resistors can be incorporated by mask option
• Number of segments selectable: 16/20/24 segments
(switchable to CMOS ports in multiples of 4: 8 maximum)
• Selectable display mode: Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias),
1/3 duty (1/3 bias), 1/4 duty (1/3 bias)
Voltage divider resistors for
LCD drive can be incorporated by mask option
• 8-bit timer/event counter: 3 channels (usable as 16-bit timer/event counter or
remote-controller signal carrier generator)
• Basic interval timer/watchdog timer × 1 channel
• Watch timer × 1 channel
Any of three modes can be used:
• 3-wire serial I/O mode: MSB/LSB switchable
• 2-wire serial I/O mode
• SBI mode
External: 3, Internal: 5
External: 1, Internal: 1
•Φ, 524 kHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
•Φ, 750 kHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz
(with 4.19 MHz main system clock, or with 32.768 kHz subsystem clock)
• 2.93 kHz, 5.86 kHz, 46.9 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
• 64-pin plastic QFP (14 × 14 mm)
• 64-pin plastic TQFP (12 × 12 mm)
Assembler, IE controller, device file, in-circuit emulator
Telephones, cameras, sphygmomanometers, gas meters, electronic scales, remote controllers,
etc.
No on-chip voltage divider
resistors for LCD drive
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
CMOS I/O
N-ch open-drain I/O
LCD controller/driver
Timer
Serial interface
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
5 channels
32
8
12
8
4
Part number
I/O port
Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
µ
PD753108
8192
(Mask ROM)
µ
PD753106
6144
(Mask ROM)
Microcomputer
4-Bit Single-Chip Microcontroller
10 Selection Guide X10679EJHV0SG00
75XL Series
■ LCD-Driver 48-pin
µ
PD753204
µ
PD753206
µ
PD753208
µ
PD75P3216
4096 6144 8192 16384
(Mask ROM) (Mask ROM) (Mask ROM) (One-time PROM)
512
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 5
Can drive LED
On-chip pull-up resistors are connectable by software
Also used for segment pins
On-chip pull-up resistors are connectable by software
Can drive LED, 13 V withstand voltage
Pull-up resistors can be incorporated by mask option
• Number of segments selectable: 4/8/12 segments
• Selectable display mode: Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias),
1/3 duty (1/3 bias), 1/4 duty (1/3 bias)
Voltage divider resistors for
LCD drive can be incorporated by mask option
• 8-bit timer/event counter × 1 channel
• Basic interval timer/watchdog timer × 1 channel
• Watch timer × 1 channel
• 8-bit timer × 2 channels (usable as 16-bit timer or remote controller signal
carrier generator)
Any of three modes can be used:
• 3-wire serial I/O mode: MSB/LSB switchable
• 2-wire serial I/O mode
• SBI mode External: 2, Internal: 5
External: 1, Internal: 1
• Φ, 524 kHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
• Φ, 750 kHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz (with 4.19 MHz main system clock)
• 2.93 kHz, 5.86 kHz, 46.9 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
48-pin plastic shrink SOP (375 mil, 0.65-mm pitch)
Assembler, IE controller, device file, in-circuit emulator
Remote controllers, cameras, sphygmomanometers, CD radio cassette players, gas meters, etc.
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
CMOS I/O
N-ch open-drain I/O
LCD controller/driver
Timer
Serial interface
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
5 channels
30
6
12
8
4
Part number
I/O port
Can drive LED
13 V withstand voltage
No on-chip pull-up resistors
No on-chip voltage divider
resistors for LCD drive
Microcomputer
4-Bit Single-Chip Microcontroller
Selection Guide X10679EJHV0SG00 11
75XL Series
■ LCD-Driver 42-pin
µ
PD753304
4096 (Mask ROM)
256
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
1.1
µ
s, 2.2
µ
s, 4.4
µ
s, 17.8
µ
s (with 3.6 MHz main system clock, RC oscillator)
85.1
µ
s (with 47 kHz subsystem clock, RC oscillator)
• 0.67
µ
s (VDD = 4.5 to 5.5 V)
• 0.8
µ
s (VDD = 2.5 to 5.5 V)
On-chip pull-up resistors are connectable by software: 4
Also used for segment pins
• Number of segments selectable: 20/24 segments
(switchable to CMOS I/O ports in multiples of 4 : 4)
• Selectable display mode: Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias),
1/3 duty (1/3 bias), 1/4 duty (1/3 bias)
On-chip voltage divider resistors for LCD drive
• 8-bit timer: 1 channel
• Basic interval timer/watchdog timer: 1 channel
• Watch timer: 1 channel
External: 1, Internal: 2
Internal: 1
Φ, 3.6 MHz, 450 kHz, 225 kHz (with 3.6 MHz main system clock)
• 2.94 kHz, 5.88 kHz, 47 kHz (with 47 kHz subsystem clock)
• 1.76 kHz, 3.52 kHz, 28.13 kHz (with 3.6 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 2.5 to 5.5 V
TA = –10 to +60°C
• 42-pin pellet/wafer
• 42-pin ceramic shrink DIP (600 mil) (ES only)
Assembler, IE controller, device file, in-circuit emulator
Small-size LCD displays, etc.
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS I/O
CMOS I/O
LCD controller/driver
Timer
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Operating ambient
temperature
Package
Development tools
Applications
3 channels
12 8
4
Part number
I/O port
Microcomputer
4-Bit Single-Chip Microcontroller
12 Selection Guide X10679EJHV0SG00
75XL Series
■ LCD-Driver 80-pin (A/D)
µ
PD753036
16384
(Mask ROM)
µ
PD75P3036
16384
(One-time PROM)
768
(4-bit × 8) × 4 banks or (8-bit × 4) × 4 banks
• 0.95
µ
s, 1.91
µ
s, 3.81
µ
s, 15.3
µ
s (with 4.19 MHz main system clock)
• 0.67
µ
s, 1.33
µ
s, 2.67
µ
s, 10.7
µ
s (with 6.0 MHz main system clock)
• 122
µ
s (with 32.768 kHz subsystem clock)
• 0.67
µ
s (VDD = 2.7 to 5.5 V)
• 0.95
µ
s (VDD = 1.8 to 5.5 V)
On-chip pull-up resistors are connectable by software: 7
Can drive LED
On-chip pull-up resistors are connectable by software
Also used for segment pins
Can drive LED
13 V withstand voltage
Pull-up resistors can be
incorporated by mask option
• Number of segments selectable: 12/16/20 segments
(switchable to bit-port output in multiples of 4: 8 maximum)
• Selectable display mode: Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias),
1/3 duty (1/3 bias), 1/4 duty (1/3 bias)
Voltage divider resistors for LCD drive
can be incorporated by mask option
• 8-bit timer/event counter: 3 channels
(Usable as 16-bit timer/event counter or remote controller signal carrier
generator)
• Basic interval timer/watchdog timer: 1 channel
• Watch timer: 1 channel
Any of three modes can be used:
• 3-wire serial I/O mode (MSB/LSB switchable)
• 2-wire serial I/O mode
• SBI mode
8-bit resolution × 8 channels
External: 3, Internal: 5
External: 1, Internal: 1
•Φ, 524 kHz, 262 kHz, 65.5 kHz (with 4.19 MHz main system clock)
•Φ, 750 kHz, 375 kHz, 93.8 kHz (with 6.0 MHz main system clock)
• 2 kHz, 4 kHz, 32 kHz (with 4.19 MHz main system clock, or 32.768 kHz subsystem clock)
• 2.93 kHz, 5.86 kHz, 46.9 kHz (with 6.0 MHz main system clock)
• Bit data set/reset/test/boolean operations
• 4-/8-bit data transfer/operations/increment and decrement/comparison
VDD = 1.8 to 5.5 V
• 80-pin plastic QFP (14 × 14 mm)
• 80-pin plastic TQFP (fine pitch) (12 × 12 mm)
Assembler, IE controller, device file, in-circuit emulator
Cordless telephones, AV equipment, home electric appliances, OA equipment, health equipment,
meters, gas tables, etc.
No on-chip voltage divider resistors for
LCD drive
ROM (bytes)
RAM (× 4 bits)
General-purpose register
Instruction cycle
Minimum instruction
execution time
CMOS input
CMOS I/O
Bit-port output
N-ch open-drain I/O
LCD controller/driver
Timer
Serial interface
A/D converter
Vectored interrupt
Test input
Clock output (PCL)
Buzzer output (BUZ)
Instruction set
Power supply voltage
Package
Development tools
Applications
5 channels
44
8
20
8
8
Part number
I/O port
Can drive LED, 13 V withstand voltage
No on-chip pull-up resistors
Microcomputer
Selection Guide X10679EJHV0SG00 13
4-Bit Single-Chip Microcontroller
17K Series
■17K Series Product Evolution
DTS
ROM: 8K bytes
Audio (On-chip LCD controller)
80-pin
ROM: 24K bytes, RAM: 1120 ×4 bits
ROM: 32K bytes, RAM: 1120 ×4 bits
ROM: 16K bytes
ROM: 8K bytes
ROM: 16K bytes
ROM: 16K bytes, LCD: 30 × 2segment
80-pin
Enhanced
Interrupt and
Timer function
LCD: 30 ×2segment
ROM: 8K bytes
ROM: 8K bytes, 48-pin
80-pin
LCD: 15
56-pin ×4segment
LCD: 20 ×3segment
ROM: 32K bytes, RAM: 1776 ×4 bits
ROM: 16K bytes, RAM: 672 ×4 bits
ROM: 24K bytes, RAM: 672 ×4 bits
ROM: 24K bytes, RAM: 1120 ×4 bits
ROM: 32K bytes, RAM: 1120 ×4 bits
ROM: 32K bytes, RAM: 1776 ×4 bits
Enhanced Serial Interface
Audio (without LCD controller)
Portable
ROM: 3K bytes, LCD: 9
38-pin ×4segment ROM: 8K bytes
ROM: 6K bytes
80-pin
64-pin
PD17016
µ
PD17017
µ
PD17P005
µ
PD17003A
µ
PD17005
µ
PD17P010
µ
PD17010
µ
PD17P012
µ
PD17012
µ
PD17P709
µ
PD17708
µ
PD17709
µ
PD17001
µ
PD17P001
µ
PD17719
µ
PD17P719
µ
PD17718
µ
PD17717
µ
PD17015
µ
PD17P073
µ
PD17072
µ
PD17073
µ
PD17071
µ
VDD = 1.8V
VDD = 0.9V
PD17934A
PD17933A
µ
µ
LCD: 20 ×4segment
80-pin
ROM: 12K bytes
ROM: 16K bytes
PD17707
µ
PD17705
µ
PD17704
µ
LCD: 30 ×2segment
80-pin
ROM 16K bytes
Learning remote-controller
Remote control transmitter (2.2 V operation)
ROM 8K bytes, SRAM 4K knibles
Pre-set remote-controller/ASC
80QFP
52QFP
ROM 6K bytes, LCD 34 x 4 segment
ROM 16K bytes, SRAM 2K knibles
52QFP
ROM 8K bytes
LCD remote-controller
28SDIP/SOP
ROM 4K bytes
ROM 8K bytes
ROM 12K bytes
PD17201A
µ
PD17207
µ
PD17P207
µ
PD17P203A
µ
PD17203A
µ
PD17P228
µ
PD17226
µ
PD17225
µ
PD17227
µ
PD17228
µ
PD17P204
PD17204
µ
µ
★
ROM 32K bytes
28SOP/30SSOP
ROM 24K bytes
PD17P236
µ
PD17235
PD17236
µ
★
★
µ
★
★: Under development
★: Under development
Microcomputer
14 Selection Guide X10679EJHV0SG00
4-Bit Single-Chip Microcontroller
17K Series
■Audio (On-Chip LCD Controller)
—
On-chip (150 MHz)
80-pin plastic QFP
+5 V ±10%
4.5 MHz
1, 1.25, 2.5, 3, 5, 6.25, 9, 10, 12.5, 25, 50, 100 kHz
Part number
Main application
ROM size
RAM size
Display
Input port
Output port
I/O port
D/A converter
A/D converter
Modulo timer
Power supply
voltage
Crystal
PLL reference
frequency
Applicable prescaler
Package
One-time PROM product
Development tools
µ
PD17012
4096 × 16 bits
316 × 4 bits
On-chip LCD driver
Segment signal: 20
Common signal: 3
8 (+ 20)
14
2
2
1
µ
PD17017
7932 × 16 bits
432 × 4 bits
µ
PD17016
3836 × 16 bits
320 × 4 bits
µ
PD17010
7932 × 16 bits
432 × 4 bits
High-end tuner, automotive radio
µ
PD17005
7932 × 16 bits
432 × 4 bits
µ
PD17003A
3836 × 16 bits
320 × 4 bits
On-chip LCD driver
Segment signal: 30
Common signal: 2
8
9 (+30)
16
42
66
9 (+8)
On-chip
(250 MHz)
64-pin plastic QFP
µ
PD17P012
µ
PD17P005
µ
PD17P010
µ
PD17P005
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
Microcomputer
Selection Guide X10679EJHV0SG00 15
4-Bit Single-Chip Microcontroller
17K Series
■Audio (without LCD Controller) (1/2)
Subseries name
Part number
Main application
ROM size
RAM size
Input port
Output port
I/O port
D/A converter
A/D converter
Modulo timer
Power supply voltage
Crystal
PLL reference frequency
Applicable prescaler
Package
One-time PROM product
Development tools
–
µ
PD17709 Subseries
µ
PD17001
µ
PD17704
µ
PD17705
µ
PD17707
µ
PD17708
µ
PD17709
High-end tuner, automotive radio
3836 × 16 bits 8192 × 16 bits 12288 × 16 bits 16384 × 16 bits
224 × 4 bits 672 × 4 bits 1120 × 4 bits 1776 × 4 bits
812
12 4
12 46
43
66
– 4 (Used also PWM: 1)
+5 V ±10%
4.5 MHz
∗1, 1.25, 2.5, 3, 5, 6.25, 9, 10, 12.5, 18, 20, 25, 50 kHz
On-chip (130 MHz)
48-pin plastic QFP
80-pin plastic QFP
µ
PD17P001
µ
PD17P709
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
∗: 1, 1.25, 2.5, 3, 5, 6.25, 9, 10, 12.5, 25, 50, 100 kHz
Microcomputer
16 Selection Guide X10679EJHV0SG00
4-Bit Single-Chip Microcontroller
Subseries name
Part number
Main application
ROM size
RAM size
Input port
Output port
I/O port
D/A converter
A/D converter
Serial interface
Modulo timer
Power supply voltage
Crystal
PLL reference frequency
Applicable prescaler
Package
One-time PROM product
Development tools
µ
PD17719 Subseries
µ
PD17717
µ
PD17718
µ
PD17719
High-end tuner, automotive radio
12288 × 16 bits 16384 × 16 bits
1120 × 4 bits 1776 × 4 bits
12
4
46
3
6
2-wire/3-wire/SBI/I2C bus (selectable): 1 channel
3-wire/UART (selectable): 1 channel
4 (Used also PWM: 1)
+5 V ±10%
4.5 MHz
1, 1.25, 2.5, 3, 5, 6.25, 9, 10, 12.5, 18, 20, 25, 50 kHz
On-chip (130 MHz)
80-pin plastic QFP
µ
PD17P719
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
17K Series
■Audio (without LCD Controller) (2/2)
Microcomputer
Selection Guide X10679EJHV0SG00 17
4-Bit Single-Chip Microcontroller
17K Series
■Portable
1, 3, 5, 6.25, 12.5, 25 kHz
On-chip (230 MHz)
Part number
Main application
ROM size
RAM size
Display
Input port
Output port
I/O port
A/D converter
Power supply
voltage
Crystal
PLL reference
frequency
Applicable prescaler
Package
One-time PROM product
Development tools
µ
PD17015
µ
PD17934A
8192 × 16 bits
µ
PD17933A
µ
PD17073
µ
PD17072
Portable radio
µ
PD17071
On-chip LCD driver
Segment signal: 15
Common signal: 4
4
9
8
µ
PD17P073
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
6144 × 16 bits
3072 × 16 bits 4096 × 16 bits
448 × 4 bits174 × 4 bits
On-chip LCD driver
Segment signal: 20
Common signal: 4
On-chip LCD driver
Segment signal: 9
Common signal: 4
1528 × 16 bits
97 × 4 bits
3
7
2
11
6
20
3— 2
1.7 to 2.6 V
(when PLL is
stopped)
1.8 to 3.6 V
(when PLL is
operating)
1.8 to 3.6 V 0.9 to 1.8 V
75 kHz
1, 3, 5, 12.5 kHz
On-chip (220 MHz)
38-pin plastic
shrink SOP
—
56-pin plastic QFP 56-pin plastic QFP
64-pin plastic TQFP 80-pin plastic TQFP
—
Microcomputer
18 Selection Guide X10679EJHV0SG00
4-Bit Single-Chip Microcontroller
336 × 4 bits
136 segments maximum
19
A/D converter: 4 channels (8-bit resolution)
1 channel
80-pin plastic QFP
17K Series
■LCD Remote-Controller, Learning Remote-Controller
Part number
Main application
ROM size
RAM size
Static RAM
LCD controller/driver
Carrier generator for infrared remote-controller signal
Infrared remote-controller signal receiver preamplifier
I/O port
External interrupt
Analog input
Timer
Serial interface
Watchdog timer
Dual clock
Instruction execution time
Power supply voltage
Package
One-time PROM product
Development tools
On-chip
None
1
2 channels
On-chip (WDOUT output)
On-chip
4
µ
s at 4 MHz
2.2 to 5.5 V
µ
PD17P207
µ
PD17P207
——
µ
PD17203A
4096 × 16 bits
4096 × 4 bits
µ
PD17P203A
µ
PD17204
7936 × 16 bits
2048 × 4 bits
µ
PD17P204
336 × 4 bits
None
On-chip
On-chip
28
1
—
4 channel
1 channel
On-chip (WDOUT output)
On-chip
4
µ
s at 4 MHz
2.2 to 5.5 V
52-pin plastic QFP
µ
PD17201A
3072 × 16 bits
µ
PD17207
4096 × 16 bits
Infrared remote controller for learningInfrared remote controller with LCD display
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
Microcomputer
Selection Guide X10679EJHV0SG00 19
4-Bit Single-Chip Microcontroller
On-chip
CMOS input: 9
N-ch open-drain output: 8
CMOS I/O: 4
1
2 channels
On-chip (WDOUT output)
On-chip (WDOUT output)
The output level existing immediately before setting standby mode is maintained.
High speed mode: 2
µ
s (at 8 MHz)
Normal mode: 4
µ
s (at 8 MHz)
2.2 to 3.6 V (4
µ
s, 2.0 to 3.6 V)
28-pin plastic SDIP, 28-pin plastic SOP, 30-pin plastic shrink SOP
µ
PD17P228★
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
Part number
Main application
ROM size
RAM size
Carrier generator for infrared remote-
controller signal
I/O port
External interrupt
Timer
Watchdog timer
Low voltage detection circuit
P0C/P0D standby operation
Instruction execution time
Power supply voltage
Package
One-time PROM product
Development tools
µ
PD17227
6144 × 16 bits
111 × 4 bits 223 × 4 bits
µ
PD17225
2048 × 16 bits
µ
PD17226
4096 × 16 bits
µ
PD17228
8192 × 16 bits
17K Series
■Pre-set Remote-Controller/ASC
Pre-set remote controller, toy, portable system
On-chip
CMOS input: 9 or 10
N-ch open-drain output: 8 or 9
CMOS I/O: 4
1
2 channels
On-chip
On-chip
The output level existing immediately before setting standby mode is maintained.
High speed mode: 2
µ
s (at 8 MHz)
Normal mode: 4
µ
s (at 8 MHz)
2.2 to 3.6 V (4
µ
s, 2.0 to 3.6 V)
28-pin plastic SOP, 30-pin plastic shrink SOP
µ
PD17P236★
Assembler, C-like compiler, device file, integrated debugger, in-circuit emulator
Part number
Main application
ROM size
RAM size
Carrier generator for infrared remote-
controller signal
I/O port
External interrupt
Timer
Watchdog timer
Low voltage detection circuit
P0C/P0D standby operation
Instruction execution time
Power supply voltage
Package
One-time PROM product
Development tools
223 × 4 bits
µ
PD17235★
12288 × 16 bits
µ
PD17236★
16384 × 16 bits
Pre-set remote controller, toy, portable system
★: Under development
Microcomputer
20 Selection Guide X10679EJHV0SG00
4-Bit Single-Chip Microcontroller
µ
PD6133, 6604, 63 Series
■Remote Controller (
µ
PD6133 Series)
Part number
Main application
ROM size
RAM size
Number of supported keys
Operation clock
frequency (fx)
Instruction execution time
Modulation carrier
frequency
Timer
POC circuit
Power supply voltage
(VDD)
Package
Development tools
µ
PD6133
µ
PD6134
µ
PD61P34B
AV, household electric appliances
512 × 10 bits 1002 × 10 bits
Mask ROM One time PROM
32 × 4 bits
32 (standard), 48 (when using key expansion pin), 96 (when expanded by diode)
300 kHz to 1 MHz (ceramic oscillator)
16
µ
s (at fx = 500 kHz)
fx, fx/2, fx/8, fx/12, fx/16, fx/24, no carrier (high level)
9-bit programmable timer
Mask option On-chip
1.8 to 3.6 V, 2.2 to 3.6 V
2.2 to 3.6 V (when POC circuit is incorporated)
20-pin plastic SOP, 20-pin plastic shrink SOP
Assembler
µ
PD6604
µ
PD66P04B
AV, household electric appliances
1002 × 10 bits
Mask ROM One time PROM
32 × 4 bits
32 (standard), 48 (when using key expansion pin), 96 (when expanded by diode)
300 kHz to 1 MHz (RC oscillator)
16
µ
s (at fx = 500 kHz)
fx, fx/2, fx/8, fx/12, fx/16, fx/24, no carrier (high level)
9-bit programmable timer
Mask option On-chip
1.8 to 3.6 V, 2.2 to 3.6 V
2.2 to 3.6 V (when POC circuit is incorporated)
20-pin plastic SOP, 20-pin plastic shrink SOP
Assembler
Part number
Main application
ROM size
RAM size
Number of supported keys
Operation clock
frequency (fx)
Instruction execution time
Modulation carrier
frequency
Timer
POC circuit
Power supply voltage
(VDD)
Package
Development tools
■Remote Controller (
µ
PD6604 Series)
Microcomputer
Selection Guide X10679EJHV0SG00 21
4-Bit Single-Chip Microcontroller
µ
PD6133, 6604, 63 Series
■Remote Controller (
µ
PD63 Series)
Part number
Main application
ROM size
RAM size
Number of supported keys
Operation clock
frequency (fx)
Instruction execution time
Modulation carrier
frequency
Timer
POC circuit
Power supply voltage
(VDD)
Package
Development tools
µ
PD62
µ
PD63A
µ
PD64
µ
PD6P4B
µ
PD65★
AV, household electric appliances
512 × 10 bits 768 × 10 bits 1002 × 10 bits 2026 × 10 bits
Mask ROM One time PROM Mask ROM
32 × 4 bits
32 (standard), 48 (when using key expansion pin), 96 (when expanded by diode) 56 (standard)
2.4 MHz to 8 MHz (ceramic oscillator)
16
µ
s (at fx = 4 MHz)
fx/8, fx/16, fx/64, fx/96, fx/128, fx/192, no carrier (high level)
9-bit programmable timer
Mask option On-chip Mask option
1.8 to 3.6 V, 2.2 to 3.6 V
2.2 to 3.6 V (when POC circuit is incorporated)
20-pin plastic shrink 20-pin plastic SOP 20-pin plastic shrink
SOP 20-pin plastic SOP 20-pin plastic shrink SOP SOP
Assembler
★: Under development
Microcomputer
22 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
178K Series
■178K Series Product Evolution
DTS
★: Under development
Audio
80-pin
On-chip UART
100-pin
100-pin
80-pin
On-chip IEBus
TM
Function shrink
TV (On-chip OSD)
64-pin/80-pin
PD178018A
Subseries
µ
PD178098
Subseries
µ
PD178078
Subseries
µ
PD178003
Subseries
µ
PD178048
★
Subseries
µ
80-pin
PD178024
★
Subseries
µ
48K to 60K 2 ch 1 ch 1 ch 8 ch – 4 ch (UART: 1 ch, 80 4.5 V –
I2C: 1 ch)
4 ch (UART: 1 ch,
IEBus: 1 ch)
24K to 32K – 6 ch 2 ch (I2C: 1 ch) 62
32K to 60K 3 ch 3 ch 2 ch (I2C: 1 ch)
16K to 24K 2 ch – – 1 ch
48K to 60K 4 ch – 1 ch 4 ch – 3 ch (I2C: 2 ch) 46 4.5 V –
■Differences among the Subseries
Function
Subseries
name
µ
PD178098
ROM
capacity
Timer
8-bit 16-bit WDT
8-bit
A/D 8-bit
D/A Serial interface I/O Remark
VDD
MIN.
value
Audio
TV
µ
PD178078
µ
PD178024
µ
PD178018A
µ
PD178048
µ
PD178003
Microcomputer
Selection Guide X10679EJHV0SG00 23
8-Bit Single-Chip Microcontroller
178K Series
■Audio (
µ
PD178003, 178018A Subseries)
Subseries name
Part number
Main application
ROM size
RAM size
Input port
Output port
I/O port
D/A converter
A/D converter
Modulo timer
Power supply voltage
Crystal
PLL reference frequency
Applicable prescaler
Package
One-time PROM product
Development tools
µ
PD178003 Subseries
µ
PD178018A Subseries
µ
PD178002
µ
PD178003
µ
PD178004A
µ
PD178006A
µ
PD178016A
µ
PD178018A
High-end tuner, automotive radio
16K bytes 24K bytes 32K bytes 48K bytes 60K bytes
512 bytes 1K bytes 3K bytes
1
3
58
–3
6
2 3 (Used also PWM: 1)
+5 V ±10%
4.5 MHz
1, 3, 9, 10, 12.5, 25, 50 kHz 1, 3, 5, 9, 10, 25, 50 kHz
On-chip (160 MHz)
80-pin plastic QFP
µ
PD178P018A
Assembler, C compioler, real-time OS, integrated debugger, system simulator, device file, in-circuit emulator
■Audio (
µ
PD178024 Subseries)
Part number
Main application
ROM size
RAM size
Input port
Output port
I/O port
Serial interface
A/D converter
Modulo timer
Power supply voltage
Crystal
PLL reference frequency
Applicable prescaler
Package
Development tools
µ
PD178023★
µ
PD178024★
High-end tuner, automotive radio
24K bytes 32K bytes
1K bytes
6
3 (N-ch open drain)
53 (N-ch open drain: 2)
I2C bus: 1 channel
3-wire: 1 channel
6
8 bits × 2 ch
4.5 to 5.5 V (When PLL or A/D converter is operating)
3.5 to 5.5 V (When only CPU is operating)
4.5 MHz
1, 3, 9, 10, 12.5, 25, 50 kHz
On-chip (160 MHz)
80-pin plastic QFP (14 × 14 mm, 0.65 mm pitch)
80-pin plastic QFP (14 × 20 mm, 0.8 mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, device file, in-circuit emulator
★: Under development
Microcomputer
24 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
178K Series
■Audio (
µ
PD178098 Subseries)
Part number
Main application
ROM size
RAM size
Input port
Output port
I/O port
Serial interface
D/A converter
A/D converter
Modulo timer
Power supply voltage
Crystal
PLL reference frequency
Applicable prescaler
Package
Flash memory product
Development tools
µ
PD178096
µ
PD178098
High-end tuner, automotive radio
48K bytes 60K bytes
2048 bytes 3072 bytes
8
8 (N-ch open drain)
64 (N-ch open drain: 3)
IEBus (mode 1 only): 1 channel
3-wire/2-wire/SBI/I2C bus (selectable): 1 channel
3-wire: 1 channel
3-wire (with function for automatic transmission and reception): 1 channel
–
8
16 bits × 1, 8 bits × 2
+5 V ±10%
6.3 MHz
1, 3, 9, 10, 12.5, 25, 50 kHz
On-chip (160 MHz)
100-pin plastic QFP
µ
PD178F098
Assembler, C compiler, real-time OS, integrated debugger, device file, in-circuit emulator
■Audio (
µ
PD178078 Subseries)
Part number
Main application
ROM size
RAM size
Input port
Output port
I/O port
Serial interface
A/D converter
Power supply voltage
Crystal
PLL reference frequency
Applicable prescaler
Package
Flash memory product
Development tools
µ
PD178076
µ
PD178078
High-end tuner, automotive radio
48K bytes 60K bytes
2K bytes 3K bytes
8
8 (N-ch open drain)
64 (N-ch open drain: 3)
3-wire/2-wire/SBI/I2C bus (selectable): 1 channel
3-wire: 1 channel
3-wire (with function for automatic transmission and reception): 1 channel
UART: 1 channel
8-bit resolution × 8 channels
+5 V ±10%
6.3 MHz, 4.5 MHz
1, 3, 9, 10, 12.5, 25, 50 kHz
On-chip (160 MHz)
100-pin plastic QFP
µ
PD178F098
Assembler, C compiler, real-time OS, integrated debugger, device file, in-circuit emulator
Microcomputer
Selection Guide X10679EJHV0SG00 25
8-Bit Single-Chip Microcontroller
Part number
Main application
ROM size
RAM size
Display
Input port
Output port
I/O port
Serial interface
PWM
A/D converter
Power supply voltage
Crystal
Package
Flash memory product
Development tools
µ
PD178046★
µ
PD178048★
TV sets, CATV
48K bytes 60K bytes
1K bytes
On-chip OSD
Kind of character: 255
Display character: 12 lines × 24 columns
Character type: 12 × 18 dot
Character color: 8
4
5 (N-ch open drain)
37 (N-ch open drain: 4)
I2C bus: 2 channels
3-wire: 1 channel
14-bit × 1
8-bit × 4
8-bit resolution × 4 channels
+5 V ±10%
5.0 MHz
64-pin plastic shrink DIP, 80-pin plastic TQFP
µ
PD178F048★
Assembler, C compiler, real-time OS, integrated debugger, device file, in-circuit emulator
★: Under development
178K Series
■TV (
µ
PD178048 Subseries)
Microcomputer
26 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■78K/0S Series Product Evolution
Subseries names are shown inside frames.
28-pin
UART
42-pin
UART
28-pin/30-pin
8-bit A/D converter
Multiplier
28-pin/30-pin
10-bit A/D converter
Multiplier
42-pin
USB
For PC
44-pin
Dual clock
28-pin/30-pin
8-bit A/D converter
Multiplier
RC oscillator
28-pin/30-pin
10-bit A/D converter
Multiplier
RC oscillator
Under development
44-pin
8-bit A/D converter
Multiplier
44-pin
10-bit A/D converter
Multiplier
PD789014
µ
PD789026
µ
PD789104A
µ
PD789114A
µ
PD789046
µ
PD789800
µ
PD789124A
µ
PD789134A
µ
PD789167
µ
PD789177
µ
44-pin
8-bit A/D converter
Inverter controller
PD789842
µ
80-pin
10-bit A/D converter
88-pin bare chip
Dot LCD
64-pin
UART
RC oscillator
PD789417A
µ
PD789830
µ
PD789316
µ
80-pin
8-bit A/D converter
PD789407A
µ
64-pin
UART
PD789306
µ
64-pin
8-bit A/D converter
RC oscillator
PD789447
µ
64-pin
8-bit A/D converter
PD789427
µ
64-pin
10-bit A/D converter
RC oscillator
PD789457
µ
64-pin
10-bit A/D converter
PD789437
µ
LCD driver
Small-scale general purpose
Microcomputer
Selection Guide X10679EJHV0SG00 27
8-Bit Single-Chip Microcontroller
78K/0S Series
■Differences among the Subseries
16K 1 ch 1 ch 1 ch 1 ch – – 1 ch (UART: 1 ch) 34 1.8 V –
4K to 16K –
2K to 4K 2 ch – 22
16K to 24K 3 ch 1 ch 1 ch 1 ch – 8 ch 1 ch (UART: 1 ch) 31 1.8 V –
8 ch –
2K to 8K 1 ch – – 4 ch 20 RC oscillation
4 ch –
– 4 ch –
4 ch –
8K to 16K 3 ch ∗1 ch 1 ch 8 ch – 1 ch (UART: 1 ch) 30 4.0 V –
12K to 24K 3 ch 1 ch 1 ch 1 ch – 7 ch 1 ch (UART: 1 ch) 43 1.8 V –
7 ch –
16K to 24K 2 ch – 4 ch 2 ch (UART: 1 ch) 25 1.8 V RC oscillation
4 ch –
– 4 ch –
4 ch –
8K to 16K – RC oscillation
–
24K 1 ch 30 2.7 V
8K 2 ch 1 ch – 1 ch – – 2 ch (USB: 1 ch) 31 4.0 V –
Function
Subseries
name
µ
PD789046
µ
PD789026
µ
PD789014
µ
PD789177
µ
PD789167
µ
PD789134A
µ
PD789124A
µ
PD789114A
µ
PD789104A
µ
PD789842
µ
PD789417A
µ
PD789407A
µ
PD789457
µ
PD789447
µ
PD789437
µ
PD789427
µ
PD789316
µ
PD789306
µ
PD789830
µ
PD789800
ROM
capacity
Timer
8-bit 16-bit Watch WDT
8-bit
A/D 10-bit
A/D Serial interface I/O Remark
VDD
MIN.
value
Small-
scale
general-
purpose
Small-
scale
general-
purpose
+ A/D
Inverter
controller
LCD
driver
For PC
∗: 10-bit timer 1 channel
Microcomputer
28 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■Small-Scale General-Purpose (
µ
PD789014 Subseries)
µ
PD789011
µ
PD789012
µ
PD78P9014
48
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
2K 4K 8K (PROM)
128 256
64K bytes
3
7
22
8-bit timer/event counter × 2 channels
Watchdog timer × 1 channel
2
3-wire/UART mode (selectable): 1 channel
STOP/HALT
VDD = 1.8 to 5.5 V
• 28-pin plastic shrink DIP (400 mil)
• 28-pin plastic SOP (375 mil)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator Remote control, game machines, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
I/O pin CMOS I/O
Timer
Timer output
Serial interface
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Microcomputer
Selection Guide X10679EJHV0SG00 29
8-Bit Single-Chip Microcontroller
★: Under development
78K/0S Series
■Small-Scale General-Purpose (
µ
PD789026 Subseries)
µ
PD789022
µ
PD789024
µ
PD789025
µ
PD789026
µ
PD78F9026A★
48
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
4K 8K 12K 16K 16K
(Flash memory)
256 512
64K bytes
4
6
34
16-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watchdog timer × 1 channel
2
3-wire/UART mode (selectable): 1 channel
STOP/HALT
VDD = 1.8 to 5.5 V
• 42-pin plastic shrink DIP (600 mil)
• 44-pin plastic QFP (10 × 10 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Compact household appliances, car accessories, air-conditioners, games, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
I/O pin CMOS I/O
Timer
Timer output
Serial interface
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Microcomputer
30 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■Small-Scale General-Purpose (
µ
PD789046 Subseries)
µ
PD789046
µ
PD78F9046★
48
0.4
µ
s
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
16K 16K (Flash memory)
512
64K bytes
4
8
34
16-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watch timer × 1 channel
Watchdog timer × 1 channel
2
3-wire/UART mode (selectable): 1 channel
STOP/HALT
VDD = 1.8 to 5.5 V
• 44-pin plastic QFP (10 × 10 mm, resin thickness 2.7 mm)
• 44-pin plastic QFP (10 × 10 mm, resin thickness 1.4 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cordless phones, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem clock
is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
I/O pin CMOS I/O
Timer
Timer output
Serial interface
Standby function
Operating power supply voltage range
Package
Development tools
Applications
★: Under development
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
Selection Guide X10679EJHV0SG00 31
8-Bit Single-Chip Microcontroller
★: Under development
78K/0S Series
■Small-Scale General-Purpose + A/D (
µ
PD789104A, 789114A Subseries)
µ
PD789104A Subseries
µ
PD789114A Subseries
µ
PD789101A
★
µ
PD789102A
★
µ
PD789104A
★
µ
PD789111A
★
µ
PD789112A
★
µ
PD789114A
★
µ
PD78F9116A
★
48
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
Ceramic oscillator
16K
2K 4K 8K 2K 4K 8K (Flash
memory)
256
64K bytes
3
7
8 × 8 = 16 bits
4
12
4
16-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watchdog timer × 1 channel
2
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 4 channels 10-bit resolution × 4 channels
STOP/HALT
VDD = 1.8 to 5.5 V
• 28-pin plastic shrink DIP (400 mil)
• 30-pin plastic shrink SOP (300 mil)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cleaners, washing machines, refrigerators, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
System clock
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
Multiplier
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Microcomputer
32 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■Small-Scale General-Purpose + A/D (
µ
PD789124A, 789134A Subseries)
µ
PD789124A Subseries
µ
PD789134A Subseries
µ
PD789121A
★
µ
PD789122A
★
µ
PD789124A
★
µ
PD789131A
★
µ
PD789132A
★
µ
PD789134A
★
µ
PD78F9136A
★
48
0.5
µ
s (4.0 MHz)
Selectable from 0.5
µ
s and 2.0
µ
s (4.0 MHz)
RC oscillator
16K
2K 4K 8K 2K 4K 8K (Flash
memory)
256
64K bytes
3
7
8 × 8 = 16 bits
4
12
4
16-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watchdog timer × 1 channel
2
3-wire serial I/O mode/UART mode (selectable): 1 channel
8-bit resolution × 4 channels 10-bit resolution × 4 channels
STOP/HALT
VDD = 1.8 to 5.5 V
• 28-pin plastic shrink DIP (400 mil)
• 30-pin plastic shrink SOP (300 mil)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Battery chargers, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
System clock
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
Multiplier
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 33
8-Bit Single-Chip Microcontroller
★: Under development
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem
clock is selected
System clock
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
Multiplier
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Standby function
Operating power supply voltage range
Package
Development tools
Applications
78K/0S Series
■Small-Scale General-Purpose + A/D (
µ
PD789167, 789177 Subseries)
µ
PD789167 Subseries
µ
PD789177 Subseries
µ
PD789166★
µ
PD789167★
µ
PD789176★
µ
PD789177★
µ
PD78F9177★
48
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
Ceramic oscillator
24K
16K 24K 16K 24K (Flash
memory)
512
64K bytes
4
11
8 × 8 =16 bits
8
17
6
16-bit timer counter × 1 channel
8-bit timer counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
4
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels 10-bit resolution × 8 channels
STOP/HALT
VDD = 1.8 to 5.5 V
44-pin plastic QFP (10 × 10 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Power windows, keyless entries, battery management units, side air bags, etc.
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
34 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■LCD Driver (
µ
PD789306, 789316 Subseries)
µ
PD789306 Subseries
µ
PD789316 Subseries
µ
PD789304★
µ
PD789306★
µ
PD789314★
µ
PD789316★
48
0.4
µ
s (5.0 MHz) 0.5
µ
s (4.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz) Selectable from 0.5
µ
s and 2.0
µ
s (4.0 MHz)
122
µ
s (32.768 kHz)
Ceramic/crystal 1 to 5 MHz RC oscillator 2 to 4 MHz
Crystal 32.768 kHz
8K 16K 8K 16K
256
20
64K bytes
4
10
4
17
4
16-bit timer counter × 1 channel
8-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watch timer × 1 channel
Watchdog timer × 1 channel
3
3-wire/UART mode (selectable): 1 channel
3-wire: 1 channel
Segment signal outputs: 20 maximum
Common signal outputs: 4 maximum
Bias: 1/3, on-chip booster
STOP/HALT
VDD = 1.8 to 5.5 V
• 64-pin plastic QFP (14 × 14 mm)
• 64-pin plastic TQFP (fine pitch) (12 × 12 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Remote controller, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem
clock is selected
Main
Sub
ROM Size (bytes)
RAM Size (bytes)
LCD data
RAM
Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
LCD controller/driver
Standby function
Operating power supply voltage range
Package
Development tools
Applications
★: Under development
Interrupt function
Internal
memory
Instruction
cycle
Resonator
Microcomputer
Selection Guide X10679EJHV0SG00 35
8-Bit Single-Chip Microcontroller
78K/0S Series
■LCD Driver (
µ
PD789407A, 789417A Subseries)
µ
PD789407A Subseries
µ
PD789417A Subseries
µ
PD789405A
µ
PD789406A
µ
PD789407A
µ
PD789415A
µ
PD789416A
µ
PD789417A
µ
PD78F9418A
★
48
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
32K
12K 16K 24K 12K 16K 24K (Flash
memory)
512
28
64K bytes
5
12
7
32
4
16-bit timer counter × 1 channel
8-bit timer counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
2
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 7 channels 10-bit resolution × 7 channels
Segment signal outputs: 28 maximum
Common signal outputs: 4 maximum
Bias: 1/2 or 1/3 (switchable)
STOP/HALT
VDD = 1.8 to 5.5 V
• 80-pin plastic QFP (14 × 14 mm)
• 80-pin plastic TQFP (fine pitch) (12 × 12 mm, resin thickness 1.05 mm)
• 80-pin plastic TQFP (fine pitch) (12 × 12 mm, resin thickness 1.0 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
APS compact cameras, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem
clock is selected
ROM Size (bytes)
RAM Size (bytes)
LCD
Size (bytes)
data RAM
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Standby function
Operating power supply voltage range
Package
Development tools
Applications
★: Under development
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
36 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
★: Under development
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem
clock is selected
Main
Sub
ROM Size (bytes)
RAM Size (bytes)
LCD data
RAM
Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Standby function
Operating power supply voltage range
Package
Development tools
Applications
78K/0S Series
■LCD Driver (
µ
PD789427, 789437 Subseries)
µ
PD789427 Subseries
µ
PD789437 Subseries
µ
PD789426★
µ
PD789427★
µ
PD789436★
µ
PD789437★
µ
PD78F9437★
48
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
Ceramic/crystal 1 to 5 MHz
Crystal 32.768 kHz
24K
16K 24K 16K 24K (Flash memory)
512
20
64K bytes
4
10
4
17
4
16-bit timer counter × 1 channel
8-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watch timer × 1 channel
Watchdog timer × 1 channel
3
3-wire/UART mode (selectable): 1 channel
3-wire: 1 channel
8-bit resolution × 4 channels 10-bit resolution × 4 channels
Segment signal outputs: 20 maximum
Common signal outputs: 4 maximum
Bias: 1/3, on-chip booster
STOP/HALT
VDD = 1.8 to 5.5 V
• 64-pin plastic QFP (14 × 14 mm)
• 64-pin plastic TQFP (fine pitch) (12 × 12 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Portable audio, etc.
Interrupt function
Internal
memory
Instruction
cycle
Resonator
Microcomputer
Selection Guide X10679EJHV0SG00 37
8-Bit Single-Chip Microcontroller
★: Under development
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem
clock is selected
Main
Sub
ROM Size (bytes)
RAM Size (bytes)
LCD data
RAM
Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Standby function
Operating power supply voltage range
Package
Development tools
Applications
78K/0S Series
■LCD Driver (
µ
PD789447, 789457 Subseries)
µ
PD789447 Subseries
µ
PD789457 Subseries
µ
PD789446★
µ
PD789447★
µ
PD789456★
µ
PD789457★
µ
PD78F9457★
48
0.5
µ
s (4.0 MHz)
Selectable from 0.5
µ
s and 2.0
µ
s (4.0 MHz)
122
µ
s (32.768 kHz)
RC oscillator 2 to 4 MHz
Crystal 32.768 kHz
24K
16K 24K 16K 24K (Flash memory)
512
20
64K bytes
4
10
4
17
4
16-bit timer counter × 1 channel
8-bit timer counter × 1 channel
8-bit timer/event counter × 1 channel
Watch timer × 1 channel
Watchdog timer × 1 channel
3
3-wire/UART mode (selectable): 1 channel
3-wire: 1 channel
8-bit resolution × 4 channels 10-bit resolution × 4 channels
Segment signal outputs: 20 maximum
Common signal outputs: 4 maximum
Bias: 1/3, on-chip booster
STOP/HALT
VDD = 1.8 to 5.5 V
• 64-pin plastic QFP (14 × 14 mm)
• 64-pin plastic TQFP (fine pitch) (12 × 12 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Portable audio, etc.
Interrupt function
Internal
memory
Instruction
cycle
Resonator
Microcomputer
38 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■LCD Driver (
µ
PD789830 Subseries)
µ
PD789830★
µ
PD78F9831★
48
0.4
µ
s
Selectable from 0.4
µ
s and 1.6
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
24K 48K (Flash memory)
1024 2048
80
64K bytes
35
11
30 38
16-bit timer counter × 1 channel
8-bit timer counter × 1 channel
Watch timer × 1 channel
Watchdog timer × 1 channel
2
UART: 1 channel
Segment signal outputs: 40 maximum
Common signal outputs: 16 maximum
STOP/HALT
VDD = 2.7 to 5.5 V
88-pin bare chip 100-pin plastic LQFP (14 × 14 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Card readers, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system
clock is selected
When subsystem
clock is selected
ROM Size (bytes)
RAM Size (bytes)
LCD
Size (bytes)
data RAM
Address space
External
Internal
I/O pin CMOS I/O
Timer
Timer output
Serial interface
LCD controller/driver
Standby function
Operating power supply voltage range
Delivery form
Development tools
Applications
★: Under development
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
Selection Guide X10679EJHV0SG00 39
8-Bit Single-Chip Microcontroller
78K/0S Series
■For PC (
µ
PD789800 Subseries)
µ
PD789800
µ
PD78F9801
48
0.33
µ
s (6.0 MHz)
Selectable from 0.33
µ
s and 1.33
µ
s (6.0 MHz)
8K 16K (Flash memory)
256
64K bytes
2
10
31
(18 ports of the above CMOS I/O ports can be switched to N-ch open-drain I/O ports)
8-bit timer × 1 channel
8-bit timer/event counter × 1 channel
Watchdog timer × 1 channel
USB (Universal Serial Bus): 1 channel
3-wire: 1 channel
Incorporated (VREG = 3.3 ±0.3 V)
STOP/HALT
VDD = 4.0 to 5.5 V
TA = –40 to +85°C (When the USB is not operating)
TA = 0 to 70°C (When the USB is operating)
• 42-pin plastic shrink DIP (600 mil)
• 44-pin plastic QFP (10 × 10 mm, resin thickness 2.7 mm)
• 44-pin plastic QFP (10 × 10 mm, resin thickness 1.4 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
USB keyboards, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
I/O pin CMOS I/O
Timer
Serial interface
Regulator
Standby function
Operating power supply voltage range
Operating ambient temperature
Package
Development tools
Applications
Interrupt function
Internal
memory
Microcomputer
40 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0S Series
■Inverter Controller (
µ
PD789842 Subseries)
µ
PD789841★
µ
PD789842★
µ
PD78F9842★
48
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s and 0.96
µ
s (8.38 MHz)
8K 16K 16K (Flash memory)
256
64K bytes
2
12
10 × 10 = 20 bits
8
22
10-bit timer for inverter control × 1 channel
8-bit timer counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
7 (Timer output: 1, inverter control output: 6)
UART: 1 channel
8 -bit resolution × 8 channels
STOP/HALT
VDD = 4.0 to 5.5 V
• 44-pin plastic QFP (10 × 10 mm, resin thickness 2.7 mm)
• 44-pin plastic QFP (10 × 10 mm, resin thickness 1.4 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Motor control for inverter-type air conditioners, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
Multiplier
CMOS input
CMOS I/O
Timer
Timer output
Serial interface
A/D converter
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
I/O pin
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 41
8-Bit Single-Chip Microcontroller
78K/0 Series
■78K/0 Series Product Evolution (1/3)
Subseries names are shown inside frames.
I
2
C bus supported
µ
I
2
C bus supported
Addition of two 8-bit timer
Enhanced external
expansion function
ROM less
Separate bus
D/A converter
and real-time output port
Enhanced 16-bit timer
A/D converter,
8-bit timer
UART
Low voltage
16-bit timer
SIO with automatic
TX/RX function
Nothing UART
EMI noise reduced
version of the
PD78018F
µ
UART
EMI/EMS noise
reduced version
Multiplex master
10-bit A/D converter
80-pin
Enhanced serial I/O
Under development
EMI noise reduced
version of the PD78078
µ
80-pin
EMI noise reduced
version of the
PD78054 100-pin
100-pin
100-pin
80-pin
42-pin/44-pin 64-pin
100-pin
64-pin 64-pin 64-pin
80-pin
Large size RAM :5KB
µ
PD78054Y
µ
PD78054
µ
PD78083
µ
PD78018FY
µ
PD78018F
µ
PD780018AY
µ
PD78014H
µ
PD780024AY
µ
PD780024A
µ
PD780034AY
µ
PD780034A
µ
PD780065
µ
PD780058Y
µ
PD780058
µ
PD78058FY
µ
PD78058F
µ
PD78078Y
µ
PD78078
µ
PD78070AY
µ
PD78070A
µ
PD78075B
I
2
C bus supported
I
2
C bus supported I
2
C bus supported
I
2
C bus supported
I
2
C bus supported Multiplex master
I
2
C bus supported Multiplex master
I
2
C bus supported
ROM/RAM extension
Enhanced serial I/O
10-bit A/D converter
64-pin
µ
PD780078Y
µ
PD780078
Multiplex master
I
2
C bus supported
Controller series
Microcomputer
42 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■78K/0 Series Product Evolution (2/3)
Subseries names are shown inside frames.
EMI noise reduced
version of the PD78064
UART
µ
100-pin
Enhanced serial interface function
100-pin
100-pin
µ
PD78064Y
µ
PD78064
µ
PD78064B
µ
PD780308
µ
PD780308Y
Enhanced I/O, FIP controller/driver
Display output total :53
AutomaticTX/RX function
6-bit U/D counter
FIP controller/driver
Display output total :34
EMI noise reduced
version of the PD78044F
µ
80-pin 80-pin
100-pin
Enhanced FIP controller/driver
Display output total :53
(Universal Grid supported)
8-bit remote control timer
80-pin
µ
PD78044F
µ
PD78044H
µ
PD780208
µ
PD780232
I
2
C bus supported
I
2
C bus supported
In
LCD drive series
FIPTM drive series
verter controller series
64-pin
10-bit A/D converter
µ
PD780988
Microcomputer
Selection Guide X10679EJHV0SG00 43
8-Bit Single-Chip Microcontroller
78K/0 Series
■78K/0 Series Product Evolution (3/3)
Subseries names are shown inside frames.
80-pin
Meter controller/driver
Under development
Call ID series
Dashboard controller series
Bus controller series
80-pin
Consumption current
When operating : 3.4 A typical
When HALT : 1.1 A typical
Super low power consumption (meter controller) series
µ
80-pin
IEBus controller
µ
PD78098B
µ
PD780973
µ
PD780955
80-pin
PD780701Y
PD780702Y
PD78F0701Y
µ
PD780701Y
µ
µ
µ
: DCAN controller
: IEBus controller
: DCAN/IEBus controller
80-pin
J1850 (CLASS2) controller
100-pin
DCAN controller
µ
PD780948
µ
PD780833Y
µ
80-pin
Call ID decoder
Simple DTMF
100-pin
Consumption current
When operating : 200 A typical (1.0 MHz)
When operating : 4.5 A typical 32.768 kHz)
When HALT : 2 A typical 32.768 kHz)
µ
µ
PD780958
µ
PD780841
µµ
Microcomputer
44 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Differences among the Subseries (1/2)
32K to 40K 4 ch 1 ch 1 ch 1 ch 8 ch – 2 ch 3 ch (UART: 1 ch) 88 1.8 V √
48K to 60K
3 ch (UART: 1 ch,
I2C: 1 ch)
– 3 ch (UART: 1 ch) 61 2.7 V
3 ch (UART: 1 ch,
I2C: 1 ch)
48K to 60K – 3 ch (I2C: 1 ch) 88
24K to 60K 2 ch 2 ch 3 ch (time-division 68 1.8 V
UART: 1 ch)
3 ch (time-division
UART: 1 ch,
I2C: 1 ch)
48K to 60K 3 ch (UART: 1 ch) 69 2.7 V
3 ch (UART: 1 ch,
I2C: 1 ch)
16K to 60K 3 ch (UART: 1 ch) 2.0 V
3 ch (UART: 1 ch,
I2C: 1 ch)
40K to 48K – 4 ch (UART: 1 ch) 60 2.7 V
48K to 60K 2 ch – 8 ch 3 ch (UART: 2 ch) 52 1.8 V
4 ch (UART: 2 ch,
I2C: 1 ch)
8K to 32K 1 ch 3 ch (UART: 1 ch, 51
8 ch – time-division
3-wire: 1 ch)
– 8 ch 3 ch (UART: 1 ch,
8 ch – I2C: 1 ch)
2 ch 53
8K to 60K
8K to 16K – – 1 ch (UART: 1 ch) 33 –
16K to 60K 3 ch ∗– 1 ch – 8 ch – 3 ch (UART: 2 ch) 47 4.0 V √
Function
Subseries
name
ROM
capacity
Timer
8-bit 16-bit Watch WDT
8-bit
A/D 10-bit
A/D Serial interface I/O
External
expansion
VDD
MIN.
value
Controller
Inverter
controller
∗: 16-bit timer 2 channels
10-bit timer 1 channel
8-bit
D/A
µ
PD78075B
µ
PD78078
µ
PD78078Y
µ
PD78070A
µ
PD78070AY
µ
PD780018AY
µ
PD780058
µ
PD780058Y
µ
PD78058F
µ
PD78058FY
µ
PD78054
µ
PD78054Y
µ
PD780065
µ
PD780078
µ
PD780078Y
µ
PD780034A
µ
PD780024A
µ
PD780034AY
µ
PD780024AY
µ
PD78014H
µ
PD78018F
µ
PD78018FY
µ
PD78083
µ
PD780988
Microcomputer
Selection Guide X10679EJHV0SG00 45
8-Bit Single-Chip Microcontroller
32K to 60K 2 ch 1 ch 1 ch 1 ch 8 ch – – 2 ch 74 2.7 V –
16K to 24K 3 ch – – 4 ch 40 4.5 V
32K to 48K 2 ch 1 ch 1 ch 8 ch 1 ch 67 2.7 V
16K to 40K 2 ch
48K to 60K 2 ch 1 ch 1 ch 1 ch 8 ch – – 3 ch (time-division 57 2.0 V –
UART: 1 ch)
3 ch (time-division
UART: 1 ch,
I2C: 1 ch)
32K 2 ch (UART: 1 ch)
16K to 32K
2 ch (UART: 1 ch,
I2C: 1 ch)
24K to 32K 2 ch – 1 ch 1 ch 2 ch – – 2 ch (UART: 1 ch) 58 2.7 V –
60K 2 ch 2 ch 1 ch 1 ch 8 ch – – 3 ch (UART: 1 ch) 79 4.0 V √
40K to 60K 1 ch 2 ch 69 2.7 V –
60K 3 ch 2 ch 16 ch – 4 ch (UART: 1 ch, 67 3.5 V
60K 3 ch I2C: 1 ch) 65 4.5 V
40K to 60K 4 ch 2 ch – 1 ch – – – 2 ch (UART: 1 ch) 69 2.7 V –
40K 6 ch 1 ch 1 ch 2 ch (UART: 2 ch) 50 2.2 V
24K to 32K 3 ch 1 ch 1 ch 1 ch 5 ch – – 2 ch (UART: 1 ch) 56 4.5 V –
78K/0 Series
■Differences among the Subseries (2/2)
Function
Subseries
name
µ
PD780208
µ
PD780232
µ
PD78044H
µ
PD78044F
µ
PD780308
µ
PD780308Y
µ
PD78064B
µ
PD78064
µ
PD78064Y
µ
PD780841
µ
PD780948
µ
PD78098B
µ
PD780701Y
µ
PD780833Y
µ
PD780958
µ
PD780955
µ
PD780973
ROM
capacity
Timer
8-bit 16-bit Watch WDT
8-bit
A/D 10-bit
A/D Serial interface I/O
External
expansion
VDD
MIN.
value
FIP
driver
8-bit
D/A
LCD
driver
For Call
ID
Meter
controller
Dashboard
controller
On-chip
bus
controller
Microcomputer
46 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78018F Subseries)
µ
PD78011F
µ
PD78012F
µ
PD78013F
µ
PD78014F
µ
PD78015F
µ
PD78016F
µ
PD78018F
µ
PD78P018F
63
0.4
µ
s (10.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (10.0 MHz)
122
µ
s (32.768 kHz)
8K 16K 24K 32K 40K 48K 60K
60K (PROM)
544 1056 1568 2080
64K bytes
4
10
2
47
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission
and reception of up to 32 bytes): 1 channel
8-bit resolution × 8 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
• 64-pin plastic shrink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch) ∗
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, TVs, audio equipments, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗: • 64-pin plastic shrink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch)
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
• 64-pin ceramic shrink DIP with window (750 mil)
• 64-pin ceramic WQFN (14 × 14 mm)
Microcomputer
Selection Guide X10679EJHV0SG00 47
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78018FY Subseries)
µ
PD78011FY
µ
PD78012FY
µ
PD78013FY
µ
PD78014FY
µ
PD78015FY
µ
PD78016FY
µ
PD78018FY
µ
PD78P018FY
63
0.4
µ
s (10.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (10.0 MHz)
122
µ
s (32.768 kHz)
8K 16K 24K 32K 40K 48K 60K
60K (PROM)
544 1056 1568 2080
64K bytes
4
10
2
47
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/2-wire/I2C bus mode (selectable): 1 channel
3-wire (with function for automatic transmission
and reception of up to 32 bytes): 1 channel
8-bit resolution × 8 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
• 64-pin plastic shrink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch) ∗
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
(except
µ
PD78013FY, 78015FY, 78016FY)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, TVs, audio equipments, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗: • 64-pin plastic shrink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch)
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
• 64-pin ceramic shrink DIP with window (750 mil)
• 64-pin ceramic WQFN (14 × 14 mm)
Microcomputer
48 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78014H Subseries)
µ
PD78011H
µ
PD78012H
µ
PD78013H
µ
PD78014H
63
0.4
µ
s (10.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (10.0 MHz)
122
µ
s (32.768 kHz)
8K 16K 24K 32K
544 1056
64K bytes
4
10
2
47
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission
and reception of up to 32 bytes): 1 channel
8-bit resolution × 8 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
• 64-pin plastic shrink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch)
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, VCRs, audio equipments, cameras, home appliances, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
Selection Guide X10679EJHV0SG00 49
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD780024A, 780034A Subseries)
µ
PD780021A
µ
PD780022A
µ
PD780023A
µ
PD780024A
µ
PD780031A
µ
PD780032A
µ
PD780033A
µ
PD780034A
µ
PD78F0034A
63
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s, 0.48
µ
s, 0.95
µ
s, 1.91
µ
s, and 3.81
µ
s (8.38 MHz)
122
µ
s (32.768 kHz)
8K 16K 24K 32K
32K (Flash memory)
512 1024
64K bytes
5
15
8
39
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 2)
3-wire: 2 channels
UART: 1 channel
8-bit resolution × 8 channels (
µ
PD780021A, 780022A, 780023A, 780024A)
10-bit resolution × 8 channels (
µ
PD780031A, 780032A, 780033A, 780034A, 78F0034A)
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
• 64-pin plastic shirink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch)
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, TVs, audio equipments, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
50 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
µ
PD780021AY
µ
PD780022AY
µ
PD780023AY
µ
PD780024AY
µ
PD780031AY
µ
PD780032AY
µ
PD780033AY
µ
PD780034AY
µ
PD78F0034AY
63
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s, 0.48
µ
s, 0.95
µ
s, 1.91
µ
s, and 3.81
µ
s (8.38 MHz)
122
µ
s (32.768 kHz)
8K 16K 24K 32K
32K (Flash memory)
512 1024
64K bytes
5
15
8
39
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 2)
3-wire: 1 channel
UART: 1 channel
I2C bus (supporting multiplex master): 1 channel
8-bit resolution × 8 channels (
µ
PD780021AY, 780022AY, 780023AY, 780024AY)
10-bit resolution × 8 channels (
µ
PD780031AY, 780032AY, 780033AY, 780034AY, 78F0034AY)
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
• 64-pin plastic shirink DIP (750 mil)
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch)
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, TVs, audio equipments, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
78K/0 Series
■Controller Series (
µ
PD780024AY, 780034AY Subseries)
Microcomputer
Selection Guide X10679EJHV0SG00 51
8-Bit Single-Chip Microcontroller
µ
PD780078 Subseries
µ
PD780078Y Subseries
µ
PD780076★
µ
PD780078★
µ
PD78F0078★
µ
PD780076Y★
µ
PD780078Y★
µ
PD78F0078Y
★
63
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s, 0.48
µ
s, 0.95
µ
s, 1.91
µ
s, and 3.81
µ
s (8.38 MHz)
122
µ
s (32.768 kHz)
48K 60K 60K 48K 60K 60K
(Flash memory) (Flash memory)
2048
64K bytes
5
15
8
40
4
16-bit timer/event counter × 2 channels
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
4 (PWM output: 2)
3-wire/UART mode (selectable): 1 channel
3-wire/UART mode (selectable): 1 channel UART: 1 channel
UART: 1 channel 3-wire: 1 channel
3-wire: 1 channel
I
2
C bus (supporting multiplex master): 1 channel
10-bit resolution × 8 channels
Clock output function
Buzzer output function
STOP/HALT
VDD = 1.8 to 5.5 V
• 64-pin plastic QFP (14 × 14 mm, 0.8-mm pitch)
• 64-pin plastic LQFP (12 × 12 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Telephones, AV equipment, automotive electronics, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
78K/0 Series
■Controller Series (
µ
PD780078, 780078Y Subseries)
★: Under development
Microcomputer
52 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD780065 Subseries)
µ
PD780065
µ
PD78F0066★
63
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s, 0.48
µ
s, 0.96
µ
s, 1.92
µ
s, 3.84
µ
s and 7.68
µ
s (8.38 MHz)
122
µ
s (32.768 kHz)
40K 48K (Flash memory)
5K
64K bytes
4
13
53
16-bit timer/event counter × 1 channel
8-bit timer × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 2)
3-wire: 1 channel
2-wire: 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
UART: 1 channel
8-bit resolution × 8 channels
Clock output function
Buzzer output function
STOP/HALT
VDD = 2.7 to 5.5 V
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Control of audio systems compatible with CD text, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 53
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78054 Subseries)
µ
PD78052
µ
PD78053
µ
PD78054
µ
PD78P054
µ
PD78055
µ
PD78056
µ
PD78058
µ
PD78P058
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
16K 24K 32K
32K (PROM)
40K 48K 60K
60K (PROM)
544 1056 2080
64K bytes
7
15
2
63
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
2.0 to 6.0 V
• 80-pin plastic QFP • 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch) ∗1(14 × 14 mm) ∗2
• 80-pin plastic TQFP • 80-pin plastic TQFP
(12 × 12 mm, 0.5-mm pitch) (12 × 12 mm)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, pagers, printers, AV equipments, air conditioners, cameras, PPCs, fuzzy
home appliances, vending machines, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗1: • 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
• 80-pin ceramic WQFN (14 × 14 mm)
∗2: • 80-pin plastic QFP (14 × 14 mm)
• 80-pin ceramic WQFN (14 × 14 mm)
Microcomputer
54 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78054Y Subseries)
µ
PD78052Y
µ
PD78053Y
µ
PD78054Y
µ
PD78055Y
µ
PD78056Y
µ
PD78058Y
µ
PD78P058Y
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
16K 24K 32K 40K 48K 60K 60K (PROM)
544 1056 2080
64K bytes
7
15
2
63
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/I2C bus/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
2.0 to 6.0 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, pagers, printers, AV equipments, air conditioners, cameras, PPCs, fuzzy
home appliances, vending machines, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗1: • 80-pin plastic QFP (14 × 14 mm)
• 80-pin plastic TQFP (12 × 12 mm)
∗2: • 80-pin plastic QFP (14 × 14 mm)
• 80-pin ceramic WQFN (14 × 14 mm)
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic TQFP
(12 × 12 mm, 0.5-mm pitch)
• 80-pin plastic QFP
(14 × 14 mm) ∗2
∗1
Microcomputer
Selection Guide X10679EJHV0SG00 55
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78058F Subseries)
µ
PD78056F
µ
PD78058F
µ
PD78P058F
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
48K 60K 60K (PROM)
1056 2080
64K bytes
7
15
2
63
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
2.7 to 6.0 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, AV equipments, car stereo, cameras, PPCs, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic TQFP
(12 × 12 mm, 0.5-mm pitch)
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
Microcomputer
56 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78058FY Subseries)
µ
PD78056FY
µ
PD78058FY
µ
PD78P058FY
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
48K 60K 60K (PROM)
1056 2080
64K bytes
7
15
2
63
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/I2C bus/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
2.7 to 6.0 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, AV equipments, car stereo, cameras, PPCs, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic TQFP
(12 × 12 mm, 0.5-mm pitch)
• 80-pin plastic QFP
(14 × 14 mm, 0.65-mm pitch)
Microcomputer
Selection Guide X10679EJHV0SG00 57
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD780058 Subseries)
µ
PD780053
µ
PD780054
µ
PD780055
µ
PD780056
µ
PD780058
µ
PD78F0058★
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
24K 32K 40K 48K 60K 60K
(Flash memory)
1056 2080
64K bytes
7
15
2
62
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (with time-division transmission function) (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, pagers, printers, AV equipments, air conditioners, cameras, PPCs, fuzzy
home appliances, vending machines, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
★: Under development
Microcomputer
58 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD780058Y Subseries)
µ
PD780053Y★
µ
PD780054Y★
µ
PD780055Y★
µ
PD780056Y★
µ
PD780058Y★
µ
PD78F0058Y
★
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
24K 32K 40K 48K 60K 60K
(Flash memory)
1056 2080
64K bytes
7
15
2
62
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/I2C bus/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (with time-division transmission function) (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, pagers, printers, AV equipments, air conditioners, cameras, PPCs, fuzzy
home appliances, vending machines, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
• 80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 59
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD780018AY Subseries)
µ
PD780016AY
µ
PD780018AY
µ
PD78P0018AY
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
48K 60K 60K (PROM)
2080
64K bytes
7
13
9
79
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 4 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
5 (PWM output: 3)
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire (with time-division transmission function): 1 channel
I2C bus (supporting multiplex master): 1 channel
8-bit resolution × 8 channels
Clock output function
Buzzer output function
Main STOP/Sub STOP/HALT
2.7 to 5.5 V
• 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch) ∗
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Mini-component stereo systems, car stereos, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗: • 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin ceramic WQFN (14 × 20 mm)
Microcomputer
60 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78075B, 78078 Subseries)
µ
PD78075B Subseries
µ
PD78078 Subseries
µ
PD78074B
µ
PD78075B
µ
PD78076
µ
PD78078
µ
PD78P078
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
32K 40K 48K 60K 60K (PROM)
1056 2080
64K bytes
7
17
2
78
8
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 4 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
5 (PWM output: 3)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, cordless phones, audio equipments, VCRs, printers, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
∗: • 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
• 100-pin ceramic WQFN (14 × 20 mm)
∗
Microcomputer
Selection Guide X10679EJHV0SG00 61
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78078Y Subseries)
µ
PD78076Y
µ
PD78078Y
µ
PD78P078Y
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
48K 60K 60K (PROM)
2080
64K bytes
7
17
2
78
8
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 4 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
5 (PWM output: 3)
3-wire/2-wire/I2C bus mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, TVs, audio equipments, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
∗: • 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
• 100-pin ceramic WQFN (14 × 20 mm)
∗
Microcomputer
62 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78070A, 78070AY)
µ
PD78070A
µ
PD78070AY
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
—
1056
64K bytes
7
17
2
51
8
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 4 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
5 (PWM output: 3)
∗
1
∗
2
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Clock output function
Buzzer output function
STOP/HALT
2.7 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
CD-ROMs, printers, PPCs, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
∗1: • 3-wire/SBI/2-wire mode (selectable): 1 channel
• 3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
• 3-wire/UART mode (selectable): 1 channel
∗2: • 3-wire/2-wire/I2C bus mode selectable: 1 channel
• 3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
• 3-wire/UART mode (selectable): 1 channel
Microcomputer
Selection Guide X10679EJHV0SG00 63
8-Bit Single-Chip Microcontroller
78K/0 Series
■Controller Series (
µ
PD78083 Subseries)
µ
PD78081
µ
PD78082
µ
PD78P083
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s and 12.8
µ
s (5.0 MHz)
8K 16K 24K (PROM)
256 384 512
64K bytes
3
10
1
32
8-bit timer/event counter × 2 channels
Watchdog timer × 1 channel
2 (PWM output: 2)
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
Clock output function
Buzzer output function
STOP/HALT
1.8 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Automotive electronics, OA equipments, display equipments, air conditioners, keyless entry, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction cycle
• 42-pin plastic shrink DIP (600 mil)
• 44-pin plastic QFP (10 × 10 mm, 0.8-mm pitch)
• 42-pin plastic shrink DIP
(600 mil)
• 44-pin plastic QFP (10 × 10
mm, 0.8-mm pitch)
• 42-pin ceramic shrink DIP
with window (600 mil)
Microcomputer
64 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■FIP Drive Series (
µ
PD78044F Subseries)
µ
PD78042F
µ
PD78043F
µ
PD78044F
µ
PD78045F
µ
PD78P048A
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
16K 24K 32K 40K 60K (PROM)
624 1136
4
12
2
27
5
16
18
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
6-bit up/down counter × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 64 bytes): 1 channel
8-bit resolution × 8 channels
Number of segments: 9 to 24
Number of digits: 2 to 16
Clock output function
Buzzer output function
STOP/HALT
2.7 to 5.5 V
• 80-pin plastic QFP (14 × 20 mm, 0.8-mm pitch) ∗
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, audio equipments, microwave ovens, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
External
Internal
CMOS input
CMOS I/O
I/O pin N-ch open-drain I/O
P-ch open-drain I/O
P-ch open-drain output
Timer
Timer output
Serial interface
A/D converter
FIP controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗: • 80-pin plastic QFP (14 × 20 mm, 0.8-mm pitch)
• 80-pin ceramic WQFN (14 × 20 mm)
Microcomputer
Selection Guide X10679EJHV0SG00 65
8-Bit Single-Chip Microcontroller
78K/0 Series
■FIP Drive Series (
µ
PD78044H Subseries)
µ
PD78044H
µ
PD78045H
µ
PD78046H
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
32K 40K 48K
1136
4
10
2
19
13
16
18
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire: 1 channel
8-bit resolution × 8 channels
Number of segments: 9 to 24
Number of digits: 2 to 16
Clock output function
Buzzer output function
STOP/HALT
2.7 to 5.5 V
• 80-pin plastic QFP (14 × 20 mm, 0.8-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Mini-component stereo systems, microwave ovens, ECRs, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
External
Internal
CMOS input
CMOS I/O
I/O pin N-ch open-drain I/O
P-ch open-drain I/O
P-ch open-drain output
Timer
Timer output
Serial interface
A/D converter
FIP controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
Microcomputer
66 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■FIP Drive Series (
µ
PD780208 Subseries)
µ
PD780204
µ
PD780205
µ
PD780206
µ
PD780208
µ
PD78P0208
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, and 6.4
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
32K 40K 48K 60K 60K (PROM)
1168 2192
4
12
2
27
5
24
16
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 64 bytes): 1 channel
8-bit resolution × 8 channels
Number of segments: 9 to 40
Number of digits: 2 to 16
Clock output function
Buzzer output function
STOP/HALT
2.7 to 5.5 V
• 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
VCRs, audio equipments, microwave ovens, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
External
Internal
CMOS input
CMOS I/O
I/O pin N-ch open-drain I/O
P-ch open-drain I/O
P-ch open-drain output
Timer
Timer output
Serial interface
A/D converter
FIP controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
∗: • 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin ceramic WQFN (14 × 20 mm)
∗
Microcomputer
Selection Guide X10679EJHV0SG00 67
8-Bit Single-Chip Microcontroller
78K/0 Series
■FIP Drive Series (
µ
PD780232 Subseries)
µ
PD780232
µ
PD78F0233★
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s and 6.4
µ
s (5.0 MHz)
16K 24K (Flash memory)
768
2
12
11
29
24
8-bit remote control timer × 1 channel
8-bit timer × 2 channels
Watchdog timer × 1 channel
3 (PWM output: 2)
2-wire: 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
8-bit resolution × 4 channels
Display outputs: 53
STOP/HALT
VDD = 4.5 to 5.5 V
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Combined mini-component stereo systems, separate mini-component stereo systems, tuners,
cassette tape decks, compact disc/mini disc players, audio amplifiers, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
External
Internal
CMOS I/O
I/O pin P-ch open-drain I/O
P-ch open-drain output
Timer
Timer outupt
Serial interface
A/D converter
FIP controller/driver
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
Microcomputer
68 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■LCD Drive Series (
µ
PD78064, 78064B Subseries)
µ
PD78064 Subseries
µ
PD78064B Subseries
µ
PD78062
µ
PD78063
µ
PD78064
µ
PD78P064
µ
PD78064B
µ
PD78P064B
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
16K 24K 32K 32K (PROM) 32K 32K (PROM)
532 1044
6
14
2
55
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
Segment signal outputs: 40 maximum
Common signal outputs: 4 maximum
Bias: 1/2 or 1/3 (switchable)
Clock output function
Buzzer output function
STOP/HALT
2.0 to 6.0 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, CD players, cameras, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 100-pin plastic QFP
(14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP
(14 × 14 mm, 0.5-mm pitch)
• 100-pin plastic QFP
(14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP
(14 × 14 mm, 0.5-mm pitch)
∗
∗: • 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
• 100-pin ceramic WQFN (14 × 20 mm)
Microcomputer
Selection Guide X10679EJHV0SG00 69
8-Bit Single-Chip Microcontroller
78K/0 Series
■LCD Drive Series (
µ
PD78064Y Subseries)
µ
PD78062Y
µ
PD78063Y
µ
PD78064Y
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
16K 24K 32K
532 1044
6
14
2
55
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/2-wire/I2C bus mode (selectable): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
Segment signal outputs: 40 maximum
Common signal outputs: 4 maximum
Bias: 1/2 or 1/3 (switchable)
Clock output function
Buzzer output function
STOP/HALT
2.0 to 6.0 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, CD players, cameras, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
Microcomputer
70 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■LCD Drive Series (
µ
PD780308, 780308Y Subseries)
µ
PD780308 Subseries
µ
PD780308Y Subseries
µ
PD780306
µ
PD780308
µ
PD78P0308★
µ
PD780306Y
µ
PD780308Y
µ
PD78P0308Y
★
63
0.4
µ
s (5.0 MHz)
Selectable from 0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s, 6.4
µ
s, and 12.8
µ
s (5.0 MHz)
122
µ
s (32.768 kHz)
48K 60K 48K 60K 60K (PROM)
2068
64K bytes
6
15
2
55
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
8-bit resolution × 8 channels
Segment signal outputs: 40 maximum
Common signal outputs: 4 maximum
Bias: 1/2 or 1/3 (switchable)
Clock output function
Buzzer output function
STOP/HALT
2.0 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cellular phones, pagers, CD players, meters, etc.
Subseries name
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 100-pin plastic QFP
(14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP
(14 × 14 mm, 0.5-mm pitch) ∗∗
• 100-pin plastic QFP
(14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP
(14 × 14 mm, 0.5-mm pitch)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire/UART mode (selectable): 1 channel
3-wire (with time-division transmission
function): 1 channel
3-wire/I
2
C bus/2-wire mode (selectable): 1 channel
3-wire/UART mode (selectable): 1 channel
3-wire (with time-division transmission
function): 1 channel
∗: • 100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
• 100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
• 100-pin ceramic WQFN (14 × 20 mm)
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 71
8-Bit Single-Chip Microcontroller
78K/0 Series
■Inverter Controller Series (
µ
PD780988 Subseries)
µ
PD780982★
µ
PD780983★
µ
PD780984★
µ
PD780986
µ
PD780988
µ
PD78F0988★
63
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s, 0.48
µ
s, 0.95
µ
s, 1.9
µ
s and 3.8
µ
s (8.38 MHz)
60K
16K 24K 32K 48K 60K
(Flash memory)
1024 2048
64K bytes
8
16
8
39
10-bit timer for inverter control × 1 channel
16-bit timer/event counter × 2 channels
8-bit timer/event counter × 3 channels
Watchdog timer × 1 channel
11 (PWM output: 3, inverter control output: 6)
3-wire: 1 channel
UART: 2 channels
10-bit resolution × 8 channels
Real-time output port
STOP/HALT
VDD = 4.0 to 5.5 V
64-pin plastic shrink DIP (750 mil)
64-pin plastic QFP (14 × 14 mm, 0.8 mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Motor control for inverter-type air conditioners, washing machines, etc.
Part number
Number of basic instructions
Minimum instruction execution time
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction cycle
★: Under development
Microcomputer
72 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Call ID Series (
µ
PD780841 Subseries)
µ
PD780840★
µ
PD780841★
µ
PD78F0841★
63
0.56
µ
s (3.58 MHz)
122
µ
s (32.768 kHz)
24K 32K 32K (Flash memory)
1024
64K bytes
5
8
2
55
4
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
2 (PWM output: 2)
3-wire: 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 2 channels
Call ID decoder function
Simple DTMF function
STOP/HALT
VDD = 2.7 to 5.5 V
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Cordless phones, etc.
Part number
Number of basic instructions
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 73
8-Bit Single-Chip Microcontroller
78K/0 Series
■Super Low Power Consumption (Meter Controller) Series (
µ
PD780955)
µ
PD780955★
62
52
µ
s (38.4 kHz)
40K
1024
64K bytes
7
10
47
3
16-bit counter × 1 channel
8-bit timer/event counter × 1 channel
8-bit timer × 5 channels
Watchdog timer × 1 channel
1
UART: 2 channels
8-bit resolution × 1 channel
Segment signal outputs: 19 maximum
Common signal outputs: 1
Static display mode only
Quality grade: Special (
µ
PD780955(A)) only (for high reliability electronic equipment)
HALT
VDD = 2.2 to 3.5 V
80-pin plastic QFP (14 × 20 mm, 0.8 mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Gas meters, etc.
Part number
Number of basic instructions
Minimum instruction execution time
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS I/O
I/O pin N-ch open drain I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
Microcomputer
74 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Super Low Power Consumption (Meter Controller) Series (
µ
PD780958 Subseries)
µ
PD780957★
µ
PD780958★
62
2
µ
s (1.0 MHz), 61
µ
s (32.768 kHz)
48K 60K
2048
64K bytes
7
17
66
3
16-bit timer/event counter × 2 channels
8-bit timer × 4 channels
Watchdog timer × 1 channel
1
UART: 1 channel
3-wire: 1 channel
Segment signal outputs: 30 maximum
Common signal outputs: 3 maximum
Bias: static or 1/3 (switchable)
MR control function
Sampling output function
Quality grade: Special (
µ
PD780957(A),
µ
PD780958(A))
only (for high reliability electronic equipment)
HALT
VDD = 2.2 to 3.5 V
100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Gas meters, etc.
Part number
Number of basic instructions
Minimum instruction execution time
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
LCD controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
I/O pin
Microcomputer
Selection Guide X10679EJHV0SG00 75
8-Bit Single-Chip Microcontroller
78K/0 Series
■Dashboard Controller Series (
µ
PD780973 Subseries)
µ
PD780973★
µ
PD78F0974★
63
0.24
µ
s (8.38 MHz)
Selectable from 0.24
µ
s, 0.48
µ
s, 0.95
µ
s, 1.91
µ
s, and 3.81
µ
s (8.38 MHz)
24K 32K (Flash memory)
778 1034
256
64K bytes
3
18
5
16
35
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 3 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
2 (PWM output: 2)
3-wire: 1 channel
UART: 1 channel
8-bit resolution × 5 channels
Segment signal outputs: 20 maximum
Common signal outputs: 4 maximum
Bias: 1/3
Buzzer output signal with composed amplitude
4 meter control (Cross-coil or stepper motor)
Clock output function
STOP/HALT
4.5 to 5.5 V
80-pin plastic QFP (14 × 20 mm, 0.8-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Vehicle meters control (dashboard mounted)
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
EEPROM
Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS Output
CMOS I/O
Timer
Timer output
Serial interface
A/D converter
LCD controller/driver
Sound generator
Meter controller/driver
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
Microcomputer
76 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Bus Controller Series (
µ
PD78098B Subseries)
µ
PD78095B
µ
PD78096B
µ
PD78098B
µ
PD78P098B
63
0.4
µ
s (5.0 MHz)
Selectable from 0.5
µ
s, 1.0
µ
s, 2.0
µ
s, 4.0
µ
s, 8.0
µ
s, and 16.0
µ
s (6.0 MHz)
122
µ
s (32.768 kHz)
40K 48K 60K 60K (PROM)
1056 3104
64K bytes
7
16
2
63
4
16-bit timer/event counter × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
3 (PWM output: 1)
3-wire/SBI/2-wire mode (selectable): 1 channel
3-wire (with function for automatic transmission and reception of up to 32 bytes): 1 channel
3-wire/UART mode (selectable): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Effective transmission speed: 26 kbps maximum
Clock output function
Buzzer output function
STOP/HALT
2.7 to 5.5 V
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Car audios, CD changers, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
D/A converter
IEBus controller
Others
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
• 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch) ∗
∗: • 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
• 80-pin ceramic WQFN (14 × 14 mm)
Microcomputer
Selection Guide X10679EJHV0SG00 77
8-Bit Single-Chip Microcontroller
78K/0 Series
■Bus Controller Series (
µ
PD780948 Subseries)
µ
PD780948★
µ
PD780949★
µ
PD78F0948★
µ
PD78F0949★
63
0.25
µ
s (8.0 MHz)
Selectable from 0.25
µ
s, 0.5
µ
s, 1
µ
s, 2
µ
s and 4
µ
s (8.0 MHz)
122
µ
s (32.768 kHz)
60K 60K (Flash memory)
1024
1024
– 256 – 256
64K bytes
5
24
8
71
16-bit timer/event counter × 1 channel
16-bit timer × 1 channel
8-bit timer/event counter × 2 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
4 (16-bit PWM output: 1, 8-bit PWM output: 2)
3-wire: 1 channel
2-wire: 1 channel
UART: 1 channel
Conformed on CAN protocol Ver. 2.0 (part B), transmission speed: 500 kbps maximum
8-bit resolution × 8 channels
Segment signal output: 40 maximum
Common signal output: 4 maximum
Bias: 1/3 bias
Battery voltage detect function
Buzzer output function (with composed amplitude)
STOP/HALT
VDD = 4.0 to 5.5 V
100-pin plastic QFP (14 × 20 mm, 0.65 mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Control of automotive dashboard and electrical equipment in car body, etc.
Part number
Number of basic instructions
Minimum instruction execution time
When main system clock is selected
When subsystem clock is selected
ROM
Size (bytes)
Internal fast RAM
Size (bytes)
Internal expansion RAM Size (bytes)
EEPROM
Size (bytes)
Address space
External
Internal
CMOS input
I/O pin CMOS I/O
Timer
Timer output
Serial interface
CAN controller
A/D converter
LCD controller/driver
Power fail detect function
Sound generator
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
Instruction
cycle
★: Under development
Microcomputer
78 Selection Guide X10679EJHV0SG00
8-Bit Single-Chip Microcontroller
78K/0 Series
■Bus Controller Series (
µ
PD780701Y Subseries)
µ
PD780701Y★
µ
PD780702Y★
µ
PD78F0701Y★
63
0.32
µ
s (6.29 MHz)
Selectable from 0.32
µ
s, 0.64
µ
s, 1.27
µ
s, 2.54
µ
s, and 5.09
µ
s (6.29 MHz)
60K 60K (Flash memory)
3350
64K bytes
8
21
56
8
3
16-bit timer/event counter × 2 channels
8-bit timer/event counter × 3 channels
Watch timer × 1 channel
Watchdog timer × 1 channel
5 (PWM output: 3)
3-wire: 2 channels
UART: 1 channel
I2C bus (supporting multiplex master): 1 channel
8-bit resolution × 16 channels
Battery voltage detect function
Clock output function
Buzzer output function
DCAN controller IEBus controller DCAN controller or
IEBus controller
STOP/HALT
VDD = 3.5 to 5.5 V
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Car audio systems, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS I/O
I/O pin TTL input/CMOS output
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Power fail detect function
Others
Bus controller
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 79
8-Bit Single-Chip Microcontroller
78K/0 Series
■Bus Controller Series (
µ
PD780833Y Subseries)
µ
PD780831Y★
µ
PD780833Y★
µ
PD78F0833Y★
63
0.48
µ
s (4.19 MHz)
Selectable from 0.48
µ
s, 0.96
µ
s, 1.92
µ
s, 3.84
µ
s, and 7.68
µ
s (4.19 MHz)
60K 60K (Flash memory)
3104
64K bytes
9
20
54
8
3
16-bit timer/event counter 16-bit timer/event counter × 2 channels
× 2 channels 8-bit timer/event counter × 3 channels
Watch timer × 1 channel Watch timer × 1 channel
Watchdog timer × 1 channel Watchdog timer × 1 channel
5 (PWM output: 3)
3-wire: 2 channels
UART: 1 channel
I2C bus (supporting multiplex master): 1 channel
8-bit resolution × 8 channels × 2
Clock output function
J1850 (CLASS2) bus interface
STOP/HALT
VDD = 4.5 to 5.5 V
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Car audio systems, etc.
Part number
Number of basic instructions
Minimum instruction execution time
Instruction cycle
ROM Size (bytes)
RAM Size (bytes)
Address space
External
Internal
CMOS I/O
I/O pin TTL input/CMOS output
N-ch open-drain I/O
Timer
Timer output
Serial interface
A/D converter
Others
Bus controller
Standby function
Operating power supply voltage range
Package
Development tools
Applications
Interrupt function
Internal
memory
★: Under development
Microcomputer
80 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■78K/IV Series Product Evolution
Subseries names are shown inside frames.
80-pin
Large size memory
100-pin
D/A converter
UART
80-pin
10-bit A/D converter
I
2
C bus supported
I
2
C bus supported
Multiplex master I
2
C bus supported
Under development
Expansion memory size
Multiplex master I
2
C bus supported
Enhanced
peripheral function
VCR servo,
analog amplifier
µ
PD784038Y
µ
PD784038
µ
PD784216Y
µ
PD784216
µ
PD784054
µ
PD784046
µ
PD784915
µ
PD784908
µ
PD784218Y
µ
PD784218
µ
PD784928Y
µ
PD784928
µ
PD784955
80-pin
Multiplex master I
2
C bus supported
µ
PD784255Y
µ
PD784255
Expansion memory size
µ
PD784938
VCR servo controller
IEBus controller
DC inverter controller
Microcomputer
Selection Guide X10679EJHV0SG00 81
16-Bit Single-Chip Microcontroller
µ
PD784225
µ
PD784225Y
µ
PD784218
µ
PD784218Y
µ
PD784216
µ
PD784216Y
µ
PD784054
µ
PD784046
µ
PD784038
µ
PD784038Y
µ
PD784928
µ
PD784928Y
µ
PD784915
µ
PD784938
µ
PD784908
µ
PD784955
3 ch (UART: 2 ch)
3 ch (UART: 2 ch,
I2C: 1 ch)
3 ch (UART: 2 ch)
3 ch (UART: 2 ch,
I2C: 1 ch)
3 ch (UART: 2 ch)
3 ch (UART: 2 ch,
I2C: 1 ch)
2 ch (UART: 2 ch)
3 ch (UART: 2 ch)
3 ch (UART: 2 ch,
I2C: 1 ch)
2 ch
3 ch (I2C: 1 ch)
2 ch
4 ch (UART: 2 ch)
2 ch (UART: 1 ch)
78K/IV Series
■Differences among the Subseries
96K to 128K 4 ch 1 ch 1 ch 1 ch 8 ch – 2 ch
192K to 256K 6 ch
96K to 128K
32K – 3 ch – – 16 ch –
32K to 64K 5 ch
48K to 128K 4 ch 8 ch – 2 ch
96K to 128K 2 ch 6 ch – – 12 ch – –
48K to 62K
96K to 256K – 4 ch – 1 ch 8 ch – –
96K to 128K
24K to 64K 2 ch 6 ch – 1 ch 8 ch – –
Function
Subseries
name
ROM
capacity
Timer
8-bit 16-bit Watch WDT
8-bit
A/D 10-bit
A/D Serial interface I/O VDD
MIN.
value
General-
purpose
8-bit
D/A
On-chip
IEBus
controller
DC
inverter
controller
VCR
servo
controller
67 1.8 V
86 2.2 V
64 4.5 V
65
46/64 2.7 V
74 2.7 V
54
80 4.0 V
67 4.5 V
Microcomputer
82 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784038 Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal memory
Interrupt function
I/O pin
Timer/counter
Serial interface
A/D converter
D/A converter
PWM output
Standby function
Pseudo-SRAM refresh function
Feature
Package
µ
PD784031
µ
PD784035
µ
PD784036
µ
PD784037
µ
PD784038
µ
PD78P4038
113
125 ns (32 MHz)
Total of 1M bytes for both programs and data
– 48K 64K 96K 128K 128K (PROM)
2K 3.5K 4.25K
4-level programmable priority, macro service, vectored interrupt, context switching function
7
18
19
4 types, 21 kinds
8
40
34 56
16-bit timer/counter × 3 channels
16-bit timer × 1 channel
UART/IOE (with on-chip baud rate generator): 2 channels
CSI (3-wire/2wire mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
12-bit resolution × 2 channels
HALT/IDLE/STOP mode
Provided
• Large internal memory
• Wide operating voltage range (2.7 to 5.5 V)
• System clock dividing function (1/2, 1/4, 1/8, 1/16)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
PPCs, LBPs, autofocus cameras, etc.
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 2.7-mm thick)
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 1.4-mm thick)
80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
ROM size (bytes)
RAM size (bytes)
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
Output
I/O
Applications
∗
∗: • 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 2.7-mm thick)
• 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 1.4-mm thick)
• 80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
• 80-pin ceramic WQFN (14 × 14 mm, 0.65-mm pitch)
Development tools
Microcomputer
Selection Guide X10679EJHV0SG00 83
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784038Y Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal memory
Interrupt function
I/O pin
Timer/counter
Serial interface
A/D converter
D/A converter
PWM output
Standby function
Pseudo-SRAM refresh function
Feature
Package
µ
PD784031Y
µ
PD784035Y
µ
PD784036Y
µ
PD784037Y
µ
PD784038Y
µ
PD78P4038Y
113
125 ns (32 MHz)
Total of 1M bytes for both programs and data
– 48K 64K 96K 128K 128K (PROM)
2K 3.5K 4.25K
4-level programmable priority, macro service, vectored interrupt, context switching function
8
19
20
4 types, 21 kinds
8
40
34 56
16-bit timer/counter × 3 channels
16-bit timer × 1 channel
UART/IOE (with on-chip baud rate generator): 2 channels
CSI (3-wire/2wire/I2C bus mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
12-bit resolution × 2 channels
HALT/IDLE/STOP mode
Provided
• Large internal memory
• Wide operating voltage range (2.7 to 5.5 V)
• System clock dividing function (1/2, 1/4, 1/8, 1/16)
ROM size (bytes)
RAM size (bytes)
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
Output
I/O
Applications
∗
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 2.7-mm thick)
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 1.4-mm thick)
80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
Cellular phones, cordless phones, AV equipment, etc.
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Development tools
∗: • 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 2.7-mm thick)
• 80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 1.4-mm thick)
• 80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
• 80-pin ceramic WQFN (14 × 14 mm, 0.65-mm pitch)
Microcomputer
84 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784046, 784054 Subseries)
Subseries name
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal
memory
Interrupt function
I/O pin
Timer/counter
Serial interface
A/D converter
Standby function
Feature
Package
µ
PD784046 Subseries
µ
PD784054 Subseries
µ
PD784044
µ
PD784046
µ
PD78F4046
µ
PD784054
113
125 ns (32 MHz)
Total of 1M bytes for both programs and data
32K 64K 64K (flash memory) 32K
1024 2048 2048 1024
4-level programmable priority, macro service, vectored interrupt, context switching function
8
23 19
25 21
7 types, 27 kinds 7 types, 23 kinds
17
0
48 47
16-bit timer × 3 channels 16-bit timer × 3
16-bit timer/counter × 2 channels
UART/CSI × 2 channels
10-bit resolution × 16 channels
HALT/IDLE/STOP mode
HALT/IDLE/STOP/standby
invalidation mode
On-chip timer unit optimum for real-time control
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 2.7-mm thick)
ROM size (bytes)
RAM size (bytes)
External source
Internal source
Number of interrupts
supporting the use of a
macro service
Type of macro
service
Input
Output
I/O
Applications Hot water supplier, vending machines, etc.
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Development tools
Microcomputer
Selection Guide X10679EJHV0SG00 85
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784216 Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
I/O pin I/O
N-ch open-drain I/O
Timer/counter
Real-time output port
Serial interface
A/D converter
D/A converter
Clock output
Buzzer output
Clock timer
Standby function
Feature
Package
Development tools
Applications
µ
PD784214
µ
PD784215
µ
PD784216
µ
PD78F4216★
113
160 ns (Main system clock 12.5 MHz)/61
µ
s (Subsystem clock 32.768 kHz)
Total of 1M bytes for both programs and data
96K 128K 128K 128K (Flash memory)
3584 5120 8192
4-level programmable priority, macro service, vectored interrupt, context switching function
9
20
27
4 types, 21kinds
8
72
6
16-bit timer/counter × 1 channel
8-bit timer/counter × 6 channels
4-bit × 2 ports or 8-bit × 1 port
UART/IOE (with dedicated on-chip baud rate generator): 2 channels
CSI (3-wire mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
Select of fXX/210, fXX/211, fXX/212, fXX/213
1 channel
HALT/STOP/IDLE mode
HALT/IDLE mode at Low power consumption mode (CPU operation using subsystem clock)
• Large internal memory
•
Wide operation voltage range (Mask ROM version: 2.2 to 5.5 V, Flash memory version: 2.7 to 5.5 V)
• Using peripheral functions of 78K/0 series
100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Cellular phones, PHS, cordless phones, CD-ROMs, AV equipment, etc.
★: Under development
Microcomputer
86 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784216Y Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
I/O pin I/O
N-ch open-drain I/O
Timer/counter
Real-time output port
Serial interface
A/D converter
D/A converter
Clock output
Buzzer output
Clock timer
Standby function
Feature
Package
Development tools
Applications
µ
PD784214Y
µ
PD784215Y
µ
PD784216Y
µ
PD78F4216Y★
113
160 ns (Main system clock 12.5 MHz)/61
µ
s (Subsystem clock 32.768 kHz)
Total of 1M bytes for both programs and data
96K 128K 128K 128K (Flash memory)
3584 5120 8192
4-level programmable priority, macro service, vectored interrupt, context switching function
9
20
27
4 types, 21kinds
8
72
6
16-bit timer/counter × 1 channel
8-bit timer/counter × 6 channels
4-bit × 2 ports or 8-bit × 1 port
UART/IOE (with dedicated on-chip baud rate generator): 2 channels
CSI (3-wire/I2C bus supporting multiplex master mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
Select of fXX/210, fXX/211, fXX/212, fXX/213
1 channel
HALT/STOP/IDLE mode
HALT/IDLE mode at Low power consumption mode (CPU operation using subsystem clock)
• Large internal memory
•
Wide operation voltage range (Mask ROM version: 2.2 to 5.5 V, Flash memory version: 2.7 to 5.5 V)
• Using peripheral functions of 78K/0 series
100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Cellular phones, PHS, cordless phones, CD-ROMs, AV equipment, etc.
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 87
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784218 Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
I/O pin I/O
N-ch open-drain I/O
Timer/counter
Real-time output port
Serial interface
A/D converter
D/A converter
Clock output
Buzzer output
Clock timer
Standby function
Feature
Package
Development tools
Applications
µ
PD784217★
µ
PD784218
µ
PD78F4218
113
160 ns (Main system clock 12.5 MHz)/61
µ
s (Subsystem clock 32.768 kHz)
Total of 1M bytes for both programs and data
192K 256K 256K (Flash memory)
12800
4-level programmable priority, macro service, vectored interrupt, context switching function
9
20
27
4 types, 21 kinds
8
72
6
16-bit timer/counter × 1 channel
8-bit timer/counter × 6 channels
4-bit × 2 ports or 8-bit × 1 port
UART/IOE (with dedicated on-chip baud rate generator): 2 channels
CSI (3-wire mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
Select of fXX/210, fXX/211, fXX/212, fXX/213
1 channel
HALT/STOP/IDLE mode
HALT/IDLE mode at Low power consumption mode (CPU operation using subsystem clock)
• Large internal memory
•
Wide operation voltage range (Mask ROM version: 2.2 to 5.5 V, Flash memory version: 2.7 to 5.5 V)
• Using peripheral functions of 78K/0 series
100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Cellular phones, PHS, cordless phones, CD-ROMs, AV equipment, etc.
★: Under development
Microcomputer
88 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784218Y Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
I/O pin I/O
N-ch open-drain I/O
Timer/counter
Real-time output port
Serial interface
A/D converter
D/A converter
Clock output
Buzzer output
Clock timer
Standby function
Feature
Package
Development tools
Applications
µ
PD784217Y★
µ
PD784218Y★
µ
PD78F4218Y★
113
160 ns (Main system clock 12.5 MHz)/61
µ
s (Subsystem clock 32.768 kHz)
Total of 1M bytes for both programs and data
192K 256K
256K (Flash memory)
12800
4-level programmable priority, macro service, vectored interrupt, context switching function
9
20
27
4 types, 21 kinds
8
72
6
16-bit timer/counter × 1 channel
8-bit timer/counter × 6 channels
4-bit × 2 ports or 8-bit × 1 port
UART/IOE (with dedicated on-chip baud rate generator): 2 channels
CSI (3-wire/I2C bus supporting multiplex master mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
Select of fXX/210, fXX/211, fXX/212, fXX/213
1 channel
HALT/STOP/IDLE mode
HALT/IDLE mode at Low power consumption mode (CPU operation using subsystem clock)
• Large internal memory
•
Wide operation voltage range (Mask ROM version: 2.2 to 5.5 V, Flash memory version: 2.7 to 5.5 V)
• Using peripheral functions of 78K/0 series
100-pin plastic LQFP (14 × 14 mm, 0.5-mm pitch)
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Cellular phones, PHS, cordless phones, CD-ROMs, AV equipment, etc.
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 89
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784225 Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
I/O pin I/O
Timer/counter
Real-time output port
Serial interface
A/D converter
D/A converter
Clock output
Buzzer output
Clock timer
Standby function
Feature
Package
Development tools
Applications
µ
PD784224★
µ
PD784225★
µ
PD78F4225★
113
160 ns (Main system clock 12.5 MHz)/61
µ
s (Subsystem clock 32.768 kHz)
Total of 1M bytes for both programs and data
96K 128K 128K (Flash memory)
3584 4352
4-level programmable priority, macro service, vectored interrupt, context switching function
7
18
23
4 types, 21 kinds
8
59
16-bit timer/counter × 1 channel
8-bit timer/counter × 4 channels
4-bit × 2 ports or 8-bit × 1 port
UART/IOE (with dedicated on-chip baud rate generator): 2 channels
CSI (3-wire mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
Select of fXX/210, fXX/211, fXX/212, fXX/213
1 channel
HALT/STOP/IDLE mode
HALT/IDLE mode at Low power consumption mode (CPU operation using subsystem clock)
• Large internal memory
• Wide operation voltage range (1.8 to 5.5 V)
• Using peripheral functions of 78K/0 series
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Car audio, portable audio, telephones, etc.
★: Under development
Microcomputer
90 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■General-Purpose (
µ
PD784225Y Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Number of interrupts
supporting the use of
a macro service
Type of macro
service
Input
I/O pin I/O
Timer/counter
Real-time output port
Serial interface
A/D converter
D/A converter
Clock output
Buzzer output
Clock timer
Standby function
Feature
Package
Development tools
Applications
µ
PD784224Y★
µ
PD784225Y★
µ
PD78F4225Y★
113
160 ns (Main system clock 12.5 MHz)/61
µ
s (Subsystem clock 32.768 kHz)
Total of 1M bytes for both programs and data
96K 128K 128K (Flash memory)
3584 4352
4-level programmable priority, macro service, vectored interrupt, context switching function
7
18
23
4 types, 21 kinds
8
59
16-bit timer/counter × 1 channel
8-bit timer/counter × 4 channels
4-bit × 2 ports or 8-bit × 1 port
UART/IOE (with dedicated on-chip baud rate generator): 2 channels
CSI (3-wire I2C bus supporting multiplex master mode): 1 channel
8-bit resolution × 8 channels
8-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
Select of fXX/210, fXX/211, fXX/212, fXX/213
1 channel
HALT/STOP/IDLE mode
HALT/IDLE mode at Low power consumption mode (CPU operation using subsystem clock)
• Large internal memory
• Wide operation voltage range (1.8 to 5.5 V)
• Using peripheral functions of 78K/0 series
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch)
80-pin plastic TQFP (12 × 12 mm, 0.5-mm pitch)
Assembler, C compiler, real-time OS, system performance analyzer, integrated debugger,
system simulator, device file, in-circuit emulator
Car audio, portable audio, telephones, etc.
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 91
16-Bit Single-Chip Microcontroller
78K/IV Series
■VCR Servo Controller (
µ
PD784915 Subseries)
µ
PD784915, 784915A
µ
PD784915B
µ
PD784916A
µ
PD784916B
µ
PD78P4916
113
250 ns (Internal clock: 8 MHz)
48K 62K 62K (PROM)
1280 2048
4 levels (programmable), vectored interrupt, macro service, vectored interrupt, context switching function
9 (including NMI)
20 (including software interrupts)
8
0
46
11 (including pseudo V sync, head amplifier switch, chroma-rotation outputs)
22-bit FRC counter × 1 channel
16-bit timer × 6 channels (including 3 channels for general-purpose timers)
8-bit counter × 2 channels
5-bit UDC counter × 1 channel
V sync separator circuit, H sync separator circuit
VISS detection circuit, wide aspect detection circuit
Field identification circuit
Head amplifier switch/chroma-rotation output circuit
16-bit resolution × 3 channels (Carrier frequency: 62.5 kHz)
8-bit resolution × 3 channels (Carrier frequency: 62.5 kHz)
Synchronous serial interface (3-wire): 2 channels (including 1 channel supporting
BUSY/STRB control)
8-bit resolution × 12 channels (Conversion time: 10
µ
s)
CTL amplifier, RECCTL driver (with rewrite capability)
CFG amplifier
DFG amplifier, DPG comparator, DPFG separator circuit (3-value separator circuit)
Reel FG comparator (2 channels)
Csync comparator
HALT/STOP mode
HALT mode for low power consumption
0.5-second measurement, low voltage operation (VDD = 2.7 V) allowed
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Part number
Number of instructions
Minimum instruction cycle
Internal
memory
Interrupt function
I/O pin
Real-time output port
Timer/counter
Special circuit
for VCR
PWM output
Serial interface
A/D converter
Analog VCR circuits
Standby function
Clock function
Package
ROM size (bytes)
RAM size (bytes)
External source
Internal source
Input
Output
I/O
Super timer
unit
Applications VCRs, camcorder, integrated TV-VCR machines, etc.
Assembler, C compiler, integrated debugger, system simulator, device file, in-circuit
emulator
Development tools
Microcomputer
92 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
VCRs, camcorder, integrated TV-VCR machines, etc.
78K/IV Series
■VCR Servo Controller (
µ
PD784928 Subseries)
µ
PD784927
µ
PD784928
µ
PD78F4928★
113
250 ns (Internal clock: 8 MHz)
96K 128K 128K (Flash memory)
2048 3584
4 levels (programmable), vectored interrupt, macro service, context switching function
9 (including NMI)
22 (including software interrupts)
20
0
54
11 (including pseudo V sync, head amplifier switch, chroma-rotation outputs)
22-bit FRC counter × 1 channel
16-bit timer × 6 channels (including 3 channels for general-purpose timers)
8-bit counter × 2 channels
5-bit UDC counter × 1 channel
V sync separator circuit, H sync separator circuit
VISS detection circuit, wide aspect detection circuit
Field identification circuit
Head amplifier switch/chroma-rotation output circuit
16-bit resolution × 3 channels (Carrier frequency: 62.5 kHz)
8-bit resolution × 3 channels (Carrier frequency: 62.5 kHz)
Synchronous serial interface (3-wire): 2 channels (including 1 channel supporting
BUSY/STRB control)
8-bit resolution × 12 channels (Conversion time: 10
µ
s)
CTL amplifier, RECCTL driver (with rewrite capability)
CFG amplifier
DFG amplifier, DPG amplifier, DPFG separator circuit (3-value separator circuit)
Reel FG comparator (2 channels)
Csync comparator
HALT/STOP mode
Low power consumption mode/HALT mode for low power consumption
0.5-second measurement, low voltage operation (VDD = 2.7 V) allowed
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Part number
Number of instructions
Minimum instruction cycle
Internal
memory
Interrupt function
I/O pin
Real-time output port
Timer/counter
Special circuit
for VCR
PWM output
Serial interface
A/D converter
Analog VCR circuits
Standby function
Clock function
Package
ROM size (bytes)
RAM size (bytes)
External source
Internal source
Input
Output
I/O
★: Under development
Applications
Super timer
unit
Assembler, C compiler, integrated debugger, system simulator, device file, in-circuit
emulator
Development tools
Microcomputer
Selection Guide X10679EJHV0SG00 93
16-Bit Single-Chip Microcontroller
VCRs, camcorder, integrated TV-VCR machines, etc.
78K/IV Series
■VCR Servo Controller (
µ
PD784928Y Subseries)
µ
PD784927Y
µ
PD784928Y
µ
PD78F4928Y★
113
250 ns (Internal clock: 8 MHz)
96K 128K 128K (Flash memory)
2048 3584
4 levels (programmable), vectored interrupt, macro service, context switching function
9 (including NMI)
23 (including software interrupts)
20
0
54
11 (including pseudo V sync, head amplifier switch, chroma-rotation outputs)
22-bit FRC counter × 1 channel
16-bit timer × 6 channels (including 3 channels for general-purpose timers)
8-bit counter × 2 channels
5-bit UDC counter × 1 channel
V sync separator circuit, H sync separator circuit
VISS detection circuit, wide aspect detection circuit
Field identification circuit
Head amplifier switch/chroma-rotation output circuit
16-bit resolution × 3 channels (Carrier frequency: 62.5 kHz)
8-bit resolution × 3 channels (Carrier frequency: 62.5 kHz)
8-bit resolution × 12 channels (Conversion time: 10
µ
s)
CTL amplifier, RECCTL driver (with rewrite capability)
CFG amplifier
DFG amplifier, DPG amplifier, DPFG separator circuit (3-value separator circuit)
Reel FG comparator (2 channels)
Csync comparator
HALT/STOP mode
Low power consumption mode/HALT mode for low power consumption
0.5-second measurement, low voltage operation (VDD = 2.7 V) allowed
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Part number
Number of instructions
Minimum instruction cycle
Internal
memory
Interrupt function
I/O pin
Real-time output port
Timer/counter
Special circuit
for VCR
PWM output
Serial interface
A/D converter
Analog VCR circuits
Standby function
Clock function
Package
Synchronous serial interface (3-wire): 2 channels (including 1 channel supporting
BUSY/STRB control)
I2C bus interface: 1 channel
ROM size (bytes)
RAM size (bytes)
External source
Internal source
Input
Output
I/O
★: Under development
Applications
Super timer
unit
Assembler, C compiler, integrated debugger, system simulator, device file, in-circuit
emulator
Development tools
Microcomputer
94 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■IEBus Controller (
µ
PD784908 Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Input
I/O
I/O pin
LED direct drive output
Transistor direct drive
N-ch open-drain I/O
Timer/counter
Real-time output port
IEBus controller
Serial interface
A/D converter
PWM output
Clock output
Watchdog timer
Standby function
Power supply voltage
Package
Development tools
Applications
µ
PD784907
µ
PD784908
µ
PD78P4908
113
320 ns (6.29 MHz)
160 ns (12.58 MHz)
Total of 1M bytes for both programs and data
96K 128K 128K (PROM)
3584 4352
4-level programmable priority, macro service, vectored interrupt, context switching function
7
20
8
72
24
8
4
16-bit timer/counter × 4 channels
4-bit × 2 ports or 8-bit × 1 port
Incorporated (simple version)
UART/IOE (3-wire): 2 channels
CSI (3-wire): 2 channels
8-bit resolution × 8 channels
12-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24
1 channel
HALT/STOP/IDLE mode
VDD = 4.5 to 5.5 V
(Main clock: fXX = 12.58 MHz,
internal system clock = fXX,
fCYK = 79 ns)
VDD = 4.0 to 5.5 V
(Other than above,
fCYK = 159 ns)
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Car audio, etc.
VDD = 4.0 to 5.5 V
(Main clock: fXX = 12.58 MHz, internal system clock = fXX,
fCYK = 79 ns)
VDD = 3.5 to 5.5 V
(Other than above, fCYK = 159 ns)
Microcomputer
Selection Guide X10679EJHV0SG00 95
16-Bit Single-Chip Microcontroller
78K/IV Series
■IEBus Controller (
µ
PD784938 Subseries)
Part number
Number of instructions
Minimum instruction cycle
Memory expansion function
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Input
I/O
I/O pin
LED direct drive output
Transistor direct drive
N-ch open-drain I/O
Timer/counter
Real-time output port
IEBus controller
Serial interface
A/D converter
PWM output
Clock output
Watchdog timer
Standby function
Package
Development tools
Applications
µ
PD784935
µ
PD784936
µ
PD784937★
µ
PD784938★
µ
PD78F4938★
113
320 ns (6.29 MHz)
160 ns (12.58 MHz)
Total of 1M bytes for both programs and data
96K 128K 192K 256K
256K (Flash memory)
5120 6656 8192 10240
4-level programmable priority, macro service, vectored interrupt, context switching function
7
20
8
72
24
8
4
16-bit timer/counter × 4 channels
4-bit × 2 ports or 8-bit × 1 port
Incorporated (simple version)
UART/IOE (3-wire): 2 channels
CSI (3-wire): 2 channels
8-bit resolution × 8 channels
12-bit resolution × 2 channels
Select of fXX, fXX/2, fXX/22, fXX/23, fXX/24
1 channel
HALT/STOP/IDLE mode
100-pin plastic QFP (14 × 20 mm, 0.65-mm pitch)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Car audio, etc.
★: Under development
Microcomputer
96 Selection Guide X10679EJHV0SG00
16-Bit Single-Chip Microcontroller
78K/IV Series
■DC Inverter Controller (
µ
PD784955 Subseries)
µ
PD784953★
µ
PD784955★
µ
PD78F4956★
113
160 ns (Internal 12.5 MHz)
24K 48K 64K (Flash memory)
768 2048
4-level programmable priority, macro service, vectored interrupt, context switching function
8 (Also internal source: 2)
22
8
59
59
32
16-bit timer/counter × 6 channels
8-bit timer/counter × 2 channels
Synchronous serial interface (3-wire): 1 channel
UART: 1 channel
8-bit resolution × 8 channels
1 channel
HALT/STOP/IDLE mode
80-pin plastic QFP (14 × 14 mm, 0.65-mm pitch, 1.4-mm thick)
Assembler, C compiler, real-time OS, integrated debugger, system simulator, device file,
in-circuit emulator
Motor control for inverter air-conditioners, etc.
Part number
Number of instructions
Minimum instruction cycle
Internal ROM size (bytes)
memory RAM size (bytes)
Interrupt function
External source
Internal source
Input
I/O
I/O pin
Pin with pull-up register
LED direct drive output
Timer/counter
Serial interface
A/D converter
Watchdog timer
Standby function
Package
Development tools
Applications
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 97
32-Bit Microprocessor
V800 SeriesTM
■V800 Series Road Map
DEVELOPMENT YEAR
Support of instructions for multimedia
10
50
100
MIPS
On chip ROM/RAM
On chip cache memory
For data processing
applications
V810 Family
TM
For multimedia
processing applications
V830 Family
TM
For embeded control
applications
V850 Family
TM
1992 1996 1998 2000
Microcomputer
98 Selection Guide X10679EJHV0SG00
V810 Family, V830 Family
32-Bit Microprocessor
Part number
Alias
Performance
Operating frequency
Operating voltage
Power consumption (max.)
Address bus
Data bus
Address space
Cache
Internal RAM
DSP Timer
Interrupt
Serial I/O
DMA
Memory interface
Others
Package
Development tools
Applications
µ
PD70741
µ
PD705101
µ
PD705102★
V821TM V831TM V832TM
16 MIPS/25 MHz 118 MIPS/100 MHz 170 MIPS/143 MHz
25 MHz 100 MHz 143 MHz
4.5 to 5.5 V 3.0 to 3.6 V 2.3 to 2.7 V
3.0 to 3.6 V
500 mW 550 mW 350 mW
(5 V25 MHz) (3.3 V/100 MHz) (2.5 V, 3.3 V/143 MHz)
24-bit 24-bit
16-bit 16-/32-bit
Internal: 4 G bytes Internal: 4 G bytes
External: 64M bytes External: 128M bytes
(maximum) (maximum)
Instruction cache: Instruction cache: 4K bytes,
1K bytes Data cache: 4K bytes
—Instruction RAM: 4K bytes,
Data RAM: 4K bytes
— 32 bits
2 channels 2 channels
External: 9, Internal: 11 External: 9, Internal: 11
2 channels 2 channels
2 channels 4 channels
Fast page mode DRAM, EDO DRAM, SRAM, I/O, SDRAM, SRAM, I/O,
SRAM, I/O, Page-ROM Page-ROM Page-ROM
Watchdog timer Debug controller
100-pin plastic QFP 160-pin plastic LQFP
Real-time OS Real-time OS, task debugger, C compiler, system performance
analyzer, device file
Printers, facsimiles, word Internet/intra-net systems, car Internet/intra-net systems, car
processors, game machines, navigation, color facsimile nativation, color facsimile
car navigation, PDAs, etc. machines, high-performance machines, digital still cameras,
TVs, etc. etc.
★: Under development
Peripheral
I/O
Microcomputer
Selection Guide X10679EJHV0SG00 99
V850 Family
■V850E/MS1TM
Part number
CPU core
CPU performance (Dhrystone)
On-chip ROM (bytes)
On-chip RAM (bytes)
Address bus
Data bus
Programmable wait
Interrupt controller
32 × 32 → 64
32 × 32 + 32 → 32
16 × 16 → 32
16 × 16 + 32 → 32
Timer/counter (RPU)
CSI
CSI/I2C
CSI/UART
UART
Dedicated baud rate
generator
A/D converter
DMA controller
Real-time output port
Input/output
Input
Other peripheral function
Power save function
Operating frequency
Operating voltage
Power consumption (TYP.)
Package
Development tools
Applications
µ
PD703100/
µ
PD703101/
µ
PD703102/
µ
PD70F3102/
µ
PD703100-A★
µ
PD703101-A★
µ
PD703102-A★
µ
PD70F3102-A★
V850E
— 43 MIPS (33 MHz)
— 96K 128K 128K
(Flash memory)
4K
24-bit
16-bit
0 to 7
External: 25, Internal: 47
0.025 to 0.05
µ
s
(40 MHz) 0.03 to 0.06
µ
s (33 MHz)
0.075
µ
s (40 MHz) 0.09
µ
s (33 MHz)
—
—
16-bit × 8 channels
2 channels
—
2 channels
—
3 channels
10-bit resolution × 8 channels
4 channels
—
114
9
Memory access control function (Direct connectable various memory)
HALT/IDLE/STOP
2 to 40 MHz 2 to 33 MHz
Internal unit: 3.3 V, A/D converter: 5 V/3.3 V, External pin: 5 V/3.3 V
570 mW/ 470 mW/300 mW (33 MHz)
360 mW (40 MHz) 144-pin plastic LQFP (20 × 20 mm)
157-pin plastic FBGA (14 × 14 mm)∗
Real-time OS, task debugger, C compiler, debugger, system performance analyzer,
device file, in-circuit emulator
Printers, facsimiles, PPCs, digital still cameras, video printers, DVD systems, etc.
External
bus
interface
DSP
Serial
interface
(SIO)
Port
★: Under development
32-Bit Single-Chip Microcontroller
∗: Except
µ
PD703100, 703101, 703102, 70F3102
Microcomputer
100 Selection Guide X10679EJHV0SG00
V850 Family
■V850/SA1TM
Part number
CPU core
CPU performance (Dhrystone)
On-chip ROM (bytes)
On-chip RAM (bytes)
Address bus
Data bus
Programmable wait
Interrupt controller
32 × 32 → 64
32 × 32 + 32 → 32
16 × 16 → 32
16 × 16 + 32 → 32
Timer/counter (RPU)
CSI
CSI/I2C
CSI/UART
UART
Dedicated baud rate
generator
A/D converter
DMA controller
Real-time output port
Input/output
Input
Other peripheral function
Power save function
Operating frequency
Operating voltage
Power consumption (TYP.)
Package
Development tools
Applications
µ
PD703015/
µ
PD703017★/
µ
PD70F3017★/
µ
PD703015Y
µ
PD703017Y★
µ
PD70F3017Y★
V850
19 MIPS (17 MHz)
128K 256K 256K
(Flash memory)
4K 8K
22-bit
16-bit
0 to 3
External: 8, Internal: 23
—
—
0.059 to 0.118
µ
s (17 MHz)
0.177
µ
s (17 MHz)
16-bit × 2 channels
8-bit × 4 channels (Cascade connection supported)
2 channels/1 channel 2 channels/1 channel 2 channels/1 channel
0 channels/1 channel 0 channels/1 channel 0 channels/1 channel
1 channel
1 channel
2 channels (UART only)
10-bit resolution × 12 channels
3 channels (internal RAM ←→ internal peripheral I/O)
8-bit × 1 or 4-bit × 2
72
13
Watch timer: 1 channel
Watchdog timer: 1 channel
HALT/IDLE/STOP
1 to 17 MHz (main clock, 3 V)
32.768 kHz (subclok)
2.7 to 3.6 V
30 mW (main clock: 10 MHz, 3 V)
100-pin plastic LQFP (14 × 14 mm)
121-pin plastic FBGA (12
×
12 mm)
Real-time OS, task debugger, C compiler, debugger, system performance analyzer,
device file, in-circuit emulator
Portable equipment such as camcorders, PHS (Personal Handyphone System), digital still
cameras, cellular phones, portable MDs, etc.
External
bus
interface
DSP
Serial
interface
(SIO)
Port
★: Under development
32-Bit Single-Chip Microcontroller
Microcomputer
Selection Guide X10679EJHV0SG00 101
µ
PD703033★/
µ
PD70F3033★/
µ
PD70F3035★/
µ
PD703033Y★
µ
PD70F3033Y★
µ
PD70F3035Y★
V850/SB1TM V850/SB2TM
V850
22 MIPS (20 MHz)
256K 256K (Flash memory)
16K
22-bit
16-bit
0 to 3
External: 8, External: 8
Internal: 30 (31 for Y products) Internal: 32 (33 for Y products)
—
—
0.050 to 0.100
µ
s (20 MHz)
0.150
µ
s (20 MHz)
16-bit × 2 channels
8-bit × 6 channels (Cascade connection supported)
3 channels/1 channel 3 channels/1 channel 3 channels/1 channel
0 channels/2 channels 0 channels/2 channels 0 channels/2 channels
2 channels
—
3 channels
10-bit resolution × 12 channels
6 channels (internal RAM ←→ internal peripheral I/O)
8-bit × 1 or 4-bit × 2
71
12
Watch timer: 1 channel Watch timer: 1 channel
Watchdog timer: 1 channel Watchdog timer: 1 channel
IEBus (Simple version)
HALT/IDLE/STOP
2 to 20 MHz (main clock)
32.768 kHz (subclock)
4.5 to 5.5 V
40 mW (target value) (main clock: 5 V, 10 MHz)
100-pin plastic LQFP (14 × 14 mm)
100-pin plastic QFP (14 × 20 mm)
Real-time OS, task debugger, C compiler, debugger, system performance analyzer,
device file, in-circuit emulator
AV equipment such as car audio systems, TVs, and VCRs, and other applications
V850 Family
■V850/SB1TM, V850/SB2TM
Part number
Alias
CPU core
CPU performance (Dhrystone)
On-chip ROM (bytes)
On-chip ROM (bytes)
Address bus
Data bus
Programmable wait
Interrupt controller
32 × 32 → 64
32 × 32 + 32 → 32
16 × 16 → 32
16 × 16 + 32 → 32
Timer/counter (RPU)
CSI
CSI/I2C
CSI/UART
UART
Dedicated baud rate
generator
A/D converter
DMA controller
Real-time output port
Input/output
Input
Other peripheral function
Power save function
Operating frequency
Operating voltage
Power consumption (TYP.)
Package
Development tools
Applications
External
bus
interface
DSP
Serial
interface
(SIO)
Port
★: Under development
32-Bit Single-Chip Microcontroller
Microcomputer
102 Selection Guide X10679EJHV0SG00
µ
PD703006
µ
PD703008
µ
PD703008Y
µ
PD70F3008★/
µ
PD70F3008Y★
V850
— 29 MIPS (25 MHz) 38 MIPS (33 MHz) 18 MIPS (16 MHz)
— 128K 128K
(Flash memory)
4K
24-bit
16-bit
0 to 3
External: 22, Internal: 31
—
—
0.03 to 0.06
µ
s 0.04 to 0.08
µ
s 0.03 to 0.06
µ
s 0.06 to 0.12
µ
s
(33 MHz) (25 MHz) (33 MHz) (16 MHz)
0.09
µ
s (33 MHz) 0.12
µ
s (25 MHz) 0.09
µ
s (33 MHz) 0.18
µ
s (16 MHz)
24-bit × 2 channels
16-bit × 6 channels
3 channels 3 channels 2 channels 3 channes/2 channels
0 channels 0 channels 1 channel 0 channels/1 channel
1 channel
—
4 channels
8-bit resolution × 16 channels
—
8
96
16
PWM: 4 channels (12 to 16-bit resolution)
HALT/IDLE/STOP
2 to 33 MHz (3.3 V) 2 to 25 MHz (3 V) 2 to 33 MHz (3.3 V) 2 to 16 MHz (3.3 V)
3.0 to 3.6 V 2.7 to 3.6 V 3.0 to 3.6 V 3.1 to 3.6 V
195 mW 120 mW 195 mW 136 mW
(3.3 V, 33 MHz) (3 V, 25 MHz) (3.3 V, 33 MHz) (3.3 V, 16 MHz)
144-pin plastic LQFP (20 × 20 mm)
Real-time OS, task debugger, C compiler, debugger, simulator, system performance analyzer,
device file, in-circuit emulator
Low-voltage-operation equipment including camcorders, VCRs, cellular phones, PDAs, and
digital still cameras
Part number
CPU core
CPU performance (Dhrystone)
On-chip ROM (bytes)
On-chip RAM (bytes)
Address bus
Data bus
Programmable wait
Interrupt controller
32 × 32 → 64
32 × 32 + 32 → 32
16 × 16 → 32
16 × 16 + 32 → 32
Timer/counter (RPU)
CSI
CSI/I2C
CSI/UART
UART
Dedicated baud rate
generator
A/D converter
DMA controller
Real-time output port
Input/output
Input
Other peripheral function
Power save function
Operating frequency
Operating voltage
Power consumption (TYP.)
Package
Development tools
Applications
V850 Family
■V854TM
External
bus
interface
DSP
Serial
interface
(SIO)
Port
★: Under development
32-Bit Single-Chip Microcontroller
Microcomputer
Selection Guide X10679EJHV0SG00 103
V850 Family
■V853TM
Part number
CPU core
CPU performance (Dhrystone)
On-chip ROM (bytes)
On-chip RAM (bytes)
Address bus
Data bus
Programmable wait
Interrupt controller
32 × 32 → 64
32 × 32 + 32 → 32
16 × 16 → 32
16 × 16 + 32 → 32
Timer/counter (RPU)
CSI
CSI/I2C
CSI/UART
UART
Dedicated baud rate
generator
A/D converter
DMA controller
Real-time output port
Input/output
Input
Other peripheral function
Power save function
Operating frequency
Operating voltage
Power consumption (TYP.)
Package
Development tools
Applications
µ
PD703003/
µ
PD703004A
★
µ
PD70F3003
µ
PD70F3003A
★
µ
PD703025A
★
µ
PD70F3025A
★
µ
PD703003A
★
V850
38 MIPS (33 MHz)
29 MIPS (25 MHz)
38 MIPS (33 MHz)
128K 96K 128K 256K 256K
(Flash memory) (Flash memory)
4K 8K
20-bit
16-bit
0 to 3
External: 17, Internal: 32
—
—
0.03 to 0.06
µ
s (33 MHz)
0.09
µ
s (33 MHz)
16 bit × 5 channels
2 channels
—
2 channels
—
3 channels
10-bit resolution × 8 channels
—
—
67
8
PWM: 4 ch (8/9/10/12-bit resolution)
D/A converter: 2 channels
HALT/IDLE/STOP
5 to 33 MHz (5 V)
5 to 25 MHz (5 V)
5 to 33 MHz (5 V)
4.5 to 5.5 V 4.75 to 5.25 V 4.5 to 5.5 V
450 mW/365 mW 365 mW 385 mW 425 mW
450 mW 480 mW
(5 V, 33 MHz) (5 V, 33 MHz) (5 V, 25 MHz) (5 V, 33 MHz) (5 V, 33 MHz) (5 V, 33 MHz)
100-pin plastic 100-pin plastic
∗
LQFP QFP 100-pin plastic LQFP (14
× 14 mm)
(14 × 14 mm) (14 × 14 mm)
Real-time OS, task debegger, C compiler, debugger, simulator, system performance analyzer,
device file, in-circuit emulator
HDDs, PPCs, VCRs, motor control, robots, LBPs, printers, NC machine tools,
single-lens reflex cameras, digital still cameras, etc.
External
bus
interface
DSP
Serial
interface
(SIO)
Port
★: Under development
32-Bit Single-Chip Microcontroller
∗: • 100-pin plastic QFP (14 × 14 mm)
• 100-pin plastic LQFP (14 × 14 mm)
Microcomputer
104 Selection Guide X10679EJHV0SG00
µ
PD703002
µ
PD70P3002
V850
29 MIPS (25 MHz)
90K 90K (PROM)
3K
24-bit
16-bit
0 to 3
External: 9, Internal: 16
—
—
0.04 to 0.08
µ
s (25 MHz)
0.12
µ
s (25 MHz)
16-bit × 2 channels
3 channels
—
—
1 channel
2 channels
—
—
—
67
1
—
HALT/IDLE/STOP
3 to 25 MHz (5 V)
4.5 to 5.5 V
250 mW 320 mW
(5 V, 25 MHz) (5 V, 25 MHz)
• 100-pin plastic QFP (14 × 14 mm) 100-pin plastic QFP (14 × 14 mm)
• 100-pin plastic LQFP (14 × 14 mm)
Real-time OS, task debugger, C compiler, debugger, simulator, system performance
analyzer, device file, in-circuit emulator
HDDs, PPCs, VCRs, motor control, robots, LBPs, printers, NC machine tools, digital phones,
engine control, etc.
V850 Family
■V852TM
Part number
CPU core
CPU performance (Dhrystone)
On-chip ROM (bytes)
On-chip RAM (bytes)
Address bus
Data bus
Programmable wait
Interrupt controller
32 × 32 → 64
32 × 32 + 32 → 32
16 × 16 → 32
16 × 16 + 32 → 32
Timer/counter (RPU)
CSI
CSI/I2C
CSI/UART
UART
Dedicated baud rate
generator
A/D converter
DMA controller
Real-time output port
Input/output
Input
Other peripheral function
Power save function
Operating frequency
Operating voltage
Power consumption (TYP.)
Package
Development tools
Applications
External
bus
interface
DSP
Serial
interface
(SIO)
Port
32-Bit Single-Chip Microcontroller
Microcomputer
Selection Guide X10679EJHV0SG00 105
VR SeriesTM
■VR Series Road Map
64-Bit Microprocessor
64-bit RISC
V
R
4000
TM
-100/50
V
R
4400
TM
-150/75
V
R
4400-200/100
V
R
4400-250
V
R
10000
TM
-200
High Performance
Low cost / Low powet
V
R
4200
TM
-80/40
High cost performance/
low power consumption
V
R
4300
TM
-100
32-bit bus
V
R
4100
TM
-40
Low power consumption
V
R
4305
TM
-80
V
R
4101
TM
-33
PDA
V
R
4300-133
V
R
5000
TM
-200
V
R
10000-250
V
R
12000
TM
-300
V
R
5464
TM
-200
V
R
5000-250
V
R
5432
TM
-167
V
R
4310
TM
-167
V
R
4121
TM
-168/131
V
R
4111
TM
-90/70
V
R
4102
TM
-49
MIPS
500
200
92 93 94 95 96 97 98 99
Under development
Microcomputer
106 Selection Guide X10679EJHV0SG00
64-Bit Microprocessor
VR Series
■VR Series Products (1/2)
µ
PD30121★
µ
PD30200
µ
PD30210
µ
PD30500
VR4121 VR4300 VR4305 VR4310 VR5000
131 MHz 168 MHz 100 MHz 80 MHz 167 MHz 200 MHz
133 MHz 250 MHz
External: 3.3 V 3.3 V 3.3 V
Internal: 2.5 V
Instruction: 16K bytes Instruction: 16K bytes Instruction: 32K bytes
Data: 8K bytes Data: 8K bytes Data: 32K bytes
177 MIPS 106 MIPS 222 MIPS 391 MIPS
163 MIPS 208 MIPS 80 SPECint92 48 SPECint92 100 SPECint92 6.8 SPECint95
60 SPECfp92 36 SPECfp92 75 SPECfp92 6.8 SPECfp95
CPU core: VR4120TM
On-chip peripheral
function ideal for
PDAs
High-speed
processing by 168
MHz operation and
0.25
µ
m process rule
Low power
consumption design
Software compatible with VR4000 Series
32-bit external bus
High-speed floating-point operation
Part number
Alias
Internal frequency
Operating voltage
Cache size
Performance
Features
Package
Embedded equipment for LBP, and game machines
Software compatible
with VR4300
32-bit external bus
High-speed floating-
point operation
Two-way superscalar
On-chip large primary
cache
On-chip secondary
cache interface
224-pin plastic FBGA 120-pin plastic QFP 272-pin plastic BGA
223-pin ceramic PGA
PDAs such as
handheld PCs and
palm-size PCs
High-end embedded
equipment for color
LBPs, network routers,
etc
★: Under development
Applications
★: Under development
■VR Series Products (2/2)
Part number
Alias
Internal frequency
Operating voltage
Cache size
Performance
Features
Package
Applications
µ
PD30540★
µ
PD30541★
µ
PD30700
µ
PD30710
VR5464 VR5432 VR10000 VR12000
200 MHz 167 MHz 200 MHz 250 MHz 300 MHz
External: 3.3 V, Internal: 2.5 V 3.3 V 2.6 V 2.6 V
Instruction: 32K bytes Instruction: 32K bytes
Data: 32K bytes Data: 32K bytes
309 MIPS 258 MIPS
7 SPECint95 6.6 SPECint95 9.0 SPECint95 14 SPECint95 16.8 SPECint95
4 SPECfp95 3.6 SPECfp95 19.0 SPECfp95 23 SPECfp95 27.8 SPECfp95
Two-way superscalar
On-chip large primary cache with line-lock
function
Hardware debugging function
Five-way superscalar
On-chip FPU and MMU
On-chip multiprocessor and secondary cache interface
272-pin plastic BGA 208-pin plastic QFP 599-pin ceramic LGA
High-end embedded equipment for color Advanced WSs, servers
LBPs and STB, etc.
Microcomputer
Selection Guide X10679EJHV0SG00 107
Development Tools
75XL Series Software Tools
■List of Software Tools
Host machine Software tool name
PC-9800 Series Relocatable assembler RA75X
IBM PC/ATTM and compatibles
PC98-NX Series IE control program IE75X
■List of Device Files
Target device Device file name Target device Device file name Target device Device file name
µ
PD750004 DF750008
µ
PD753036 DF753036
µ
PD754144 DF754244
µ
PD750006
µ
PD754244
µ
PD750008
µ
PD750104
µ
PD753104 DF753108
µ
PD754202 DF754202
µ
PD750106
µ
PD753106
µ
PD750108
µ
PD753108
µ
PD750064 DF750068
µ
PD753204 DF753208
µ
PD754264 DF754264
µ
PD750066
µ
PD753206
µ
PD750068
µ
PD753208
µ
PD753012A DF753017
µ
PD753304 DF753304
µ
PD754302 DF754304
µ
PD753016A
µ
PD754304
µ
PD753017A
Microcomputer
108 Selection Guide X10679EJHV0SG00
Development Tools
75XL Series Hardware Tools
■Common Hardware Tools
Tool name Product name
In-circuit emulator IE-75001-R
Emulation board IE-75300-R-EM
■List of Hardware Tools
Target device Conversion socket/
Emulation probe Conversion adapter/
Device name Package Flexible board
µ
PD750004 42-pin SDIP (600 mil) EP-75008CU-R –
µ
PD750006
µ
PD750008 44-pin QFP (10 × 10) EP-75008GB-R EV-9200G-44
µ
PD750104 42-pin SDIP (600 mil) EP-75008CU-R –
µ
PD750106
µ
PD750108 44-pin QFP (10 × 10) EP-75008GB-R EV-9200G-44
µ
PD750064 42-pin SDIP (600 mil) EP-750068CU-R –
µ
PD750066
µ
PD750068 42-pin SSOP (375 mil) EP-750068GT-R EV-9500GT-42
µ
PD753012A 80-pin QFP (14 × 14) EP-753017GC-R EV-9200GC-80
µ
PD753016A
µ
PD753017A 80-PIN TQFP (12 × 12) EP-753017GK-R TGK-080SDW∗
µ
PD753036 80-pin QFP (14 × 14) EP-75336GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-75336GK-R TGK-080SDW∗
µ
PD753104 64-pin QFP (14 × 14) EP-753108GC-R EV-9200GC-64
µ
PD753106
µ
PD753108 64-pin LQFP (12 × 12) EP-753108GK-R TGK-064SBW∗
µ
PD753204 48-pin SSOP (375 mil) EP-753208GT-R EV-9500GT-48
µ
PD753206
µ
PD753208
µ
PD753304 42-pin SDIP (600 mil) EP-753304DU-R –
(ES only) (ES only)
µ
PD754144 20-pin SOP (300 mil) EP-754144GS-R EV-9501GS-20
µ
PD754244 20-pin SSOP (300 mil) EV-9500GS-20
µ
PD754264 20-pin SOP (300 mil) EV-9501GS-20
µ
PD754202 20-pin SOP (300 mil) EP-754144GS-R EV-9501GS-20
20-pin SSOP (300 mil) EV-9500GS-20
µ
PD754302 36-pin SSOP (300 mil) EP-754304GS-R EV-9500GS-36
µ
PD754304
∗: This is a product of Tokyo Eletech Corporation.
Microcomputer
Selection Guide X10679EJHV0SG00 109
µ
PD17933A AS17934
µ
PD17934A
µ
PD17201A AS17201
µ
PD17203A AS17203
µ
PD17204 AS17204
µ
PD17207 AS17207
µ
PD17225 AS17225
µ
PD17226
µ
PD17227
µ
PD17228
µ
PD17235★AS17235★
µ
PD17236★
µ
PD17053 AS17053
µ
PD17062 AS17062
µ
PD17068 AS17068
µ
PD17071 AS17071
µ
PD17072
µ
PD17073
µ
PD17704 AS17707
µ
PD17705
µ
PD17707
µ
PD17708
µ
PD17709
µ
PD17717
µ
PD17718
µ
PD17719
Development Tools
17K Series Software Tools
■List of Software Tools
Host machine Software tool name
PC-9800 Series Relocatable assembler RA17K
IBM PC/AT and compatibles C-like compiler
emlC-17K
TM
PC98-NX Series Integrated debugger
SIMPLEHOST
TM
■List of Device Files
Target device Device file name Target device Device file name Target device Device file name
★: Under development
µ
PD17001 AS17001
µ
PD17003A AS17003
µ
PD17005 AS17005
µ
PD17010 AS17010
µ
PD17012 AS17012
µ
PD17015 AS17015
µ
PD17016 AS17016
µ
PD17017
Microcomputer
110 Selection Guide X10679EJHV0SG00
Development Tools
17K Series Hardware Tools
■Common Hardware Tools
Tool name Product name
In-circuit emulator IE-17K
IE-17K-ET
EMU-17K∗
■List of Hardware Tools (1/2)
Target device Conversion socket/
SE board Emulation probe Conversion adapter/
Device name Package Flexible board
µ
PD17001 48-pin QFP SE-17001 EP-17001GH EV-9200GH-48
µ
PD17003A 80-pin QFP SE-17010 EP-17003GF EV-9200G-80
µ
PD17005 80-pin QFP SE-17010 EP-17003GF EV-9200G-80
µ
PD17010 80-pin QFP SE-17010 EP-17003GF EV-9200G-80
µ
PD17012 64-pin QFP SE-17012 EP-17202GF EV-9200G-64
µ
PD17015 38-pin SSOP SE-17015 EP-17K38GT EV-9500GT-38
µ
PD17016 80-pin QFP SE-17010 EP-17003GF EV-9200G-80
µ
PD17017
µ
PD17053 64-pin SDIP SE-17053 EP-17052CW –
µ
PD17062 48-pin SDIP SE-17002 EP-17002CU –
64-pin QFP EP-17002GC EV-9200GC-64
µ
PD17068 100-pin QFP SE-17008 EP-17068GF EV-9200GF-100
µ
PD17071 56-pin QFP SE-17072 EP-17K56GB -1 TGB-056SBW∗
µ
PD17072 (Bend lead package)
µ
PD17073 EP-17K56GB-2
(Inverted lead package)
64-pin TQFP EP-17K64GB TGB-064SDP∗
∗: This is a product of Tokyo Eletech Corporation.
∗: This is a product of I.C Corporation.
Microcomputer
Selection Guide X10679EJHV0SG00 111
Development Tools
17K Series Hardware Tools
■List of Hardware Tools (2/2)
Target device Conversion socket/
SE board Emulation probe Conversion adapter/
Device name Package Flexible board
µ
PD17704 80-pin QFP SE-17709 EP-17K80GC EV-9200GC-80
µ
PD17705
µ
PD17707
µ
PD17708
µ
PD17709
µ
PD17717
µ
PD17718
µ
PD17719
µ
PD17933A 80-pin QFP SE-17934 EP-17K80GK TGB-080SDP∗
µ
PD17934A
µ
PD17201A 80-pin QFP (14 × 20) SE-17207 EP-17201GF EV-9200G-80
µ
PD17203A 52-pin QFP (14 × 20) SE-17204 EP-17203GC EV-9200G-52
µ
PD17204
µ
PD17207 80-pin QFP (14 × 20) SE-17207 EP-17201GF EV-9200G-80
µ
PD17225
µ
PD17226
µ
PD17227
µ
PD17228
µ
PD17235★28-pin SOP (375 mil) SE-17235★EP-17K28GT EV-9500GT-28
µ
PD17236★30-pin SSOP (300 mil) EP-17K30GS★EV-9500GT-30
∗: This is a product of Tokyo Eletech Corporation.
28-pin SDIP (400 mil) SE-17225 EP-17K28CT –
28-pin SOP (375 mil) EP-17K28GT EV-9500GT-28
30-pin SSOP (300 mil) EP-17K30GS★EV-9500GT-30
★: Under development
Microcomputer
112 Selection Guide X10679EJHV0SG00
Development Tools
µ
PD6133, 6604, 63 Series Software Tools
■List of Software Tools
Host machine Product name
PC-9800 Series Absolute assembler AS6133
IBM PC/AT and compatibles
PC98-NX Series
178K Series Software Tools
■List of Device Files
Target device Device file name Target device Device file name Target device Device file name
µ
PD178002 DF178018
µ
PD178023★DF178134★
µ
PD178076★DF178098
µ
PD178003
µ
PD178024★
µ
PD178078★
µ
PD178004A
µ
PD178046★DF178048★
µ
PD178096★
µ
PD178006A
µ
PD178048★
µ
PD178098★
µ
PD178016A
µ
PD178018A
★: Under development
Software tools other than device files are common to the 178K Series and the 78K/0 Series. See 78K/0 Series List
of Software Tools for details.
Microcomputer
Selection Guide X10679EJHV0SG00 113
Development Tools
178K Series Hardware Tools
(1) When using the in-circuit emulator IE-78K0-NS
■Common Hardware Tools (When using IE-78K0-NS)
Tool name Product name
In-circuit emulator IE-78K0-NS
Performance board IE-78K0-NS-PA★
Power supply unit IE-70000-MC-PS-B
Interface adapter IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
IE-70000-CD-IF-A for PCMCIA socket
■List of Hardware Tools (When using IE-78K0-NS)
Target device Emulation board Conversion socket/
I/O board Emulation probe Conversion adapter/
Device name Package Flexible board
µ
PD178002 80-pin QFP (14 × 14) IE-178018-NS-EM1 NP-80GC∗1EV-9200GC-80
µ
PD178003
µ
PD178004A 80-pin QFP (14 × 14) IE-178018-NS-EM1 NP-80GC∗1EV-9200GC-80
µ
PD178006A
µ
PD178016A
µ
PD178018A
µ
PD178023★80-pin QFP (14 × 20) IE-178134-NS-EM1★NP-80GF∗1EV-9200G-80
µ
PD178024★80-pin QFP (14 × 14) NP-80GC∗1EV-9200GC-80
µ
PD178046★64-pin SDIP (750 mil) IE-178048-NS-EM1★NP-64CW∗1–
µ
PD178048★80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD178076★100-pin QFP (14 × 20) IE-178098-NS-EM1 NP-100GF∗1EV-9200GF-100
µ
PD178078★
µ
PD178096★100-pin QFP (14 × 20) IE-178098-NS-EM1 NP-100GF∗1EV-9200GF-100
µ
PD178098★
★: Under development
★: Under development
∗1: This is a product of Natio Densei Machida Mfg. Co., Ltd.
∗2: This ia a product of Tokyo Eletech Corporation.
Microcomputer
114 Selection Guide X10679EJHV0SG00
178K Series Hardware Tools
(2) When using the in-circuit emulator IE-78001-R-A
■Common Hardware Tools (When using IE-78001-R-A)
Tool name Product name
In-circuit emulator IE-78001-R-A
Interface adapter IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
■List of Hardware Tools (When using IE-78001-R-A)
Target device Emulation board Conversion socket/
I/O board Emulation probe Conversion adapter/
Device name Package Emulation probe conversion board Flexible board
µ
PD178002 80-pin QFP (14 × 14) IE-178018-R-EM EP-78230GC-R EV-9200GC-80
µ
PD178003
µ
PD178004A 80-pin QFP (14 × 14) IE-178018-R-EM EP-78230GC-R EV-9200GC-80
µ
PD178006A
µ
PD178016A
µ
PD178018A
µ
PD178023★80-pin QFP (14 × 20) IE-178134-NS-EM1★EP-78130GF-R EV-9200G-80
µ
PD178024★80-pin QFP (14 × 14) IE-78K0-R-EX1 EP-78230GC-R EV-9200GC-80
µ
PD178046★64-pin SDIP (750 mil) Not supported. Use IE-78K0-NS for these devices.
µ
PD178048★80-pin TQFP (12 × 12)
µ
PD178076★100-pin QFP (14 × 20) IE-178098-NS-EM1 EP-78064GF-R EV-9200GF-100
µ
PD178078★IE-78K0-R-EX1
µ
PD178096★100-pin QFP (14 × 20) IE-178098-NS-EM1 EP-78064GF-R EV-9200GF-100
µ
PD178098★IE-78K0-R-EX1
★: Under development
Development Tools
Microcomputer
Selection Guide X10679EJHV0SG00 115
Development Tools
78K/0S Series Software Tools
■List of Software Tools
Host machine Software tool name
PC-9800 Series Assembler package RA78K0S
IBM PC/AT and compatibles C compiler CC78K0S
PC98-NX Series C library source file CC78K0S-L
Integrated debugger ID78K0S-NS
System simulator SM78K0S
Embedded OS MX78K0S
EWS Assembler package RA78K0S
C compiler CC78K0S
C library source file CC78K0S-L
■List of Device Files
Subseries name Device file name
µ
PD789014 DF789014
µ
PD789026 DF789026
µ
PD789046 DF789046
µ
PD789104A★DF789134
µ
PD789114A★
µ
PD789124A★
µ
PD789134A★
Subseries name Device file name
µ
PD789167★DF789178
µ
PD789177★
µ
PD789407A DF789418
µ
PD789417A
µ
PD789800 DF789801
µ
PD789830★DF789831
µ
PD789842★DF789842
★: Under development
Microcomputer
116 Selection Guide X10679EJHV0SG00
Development Tools
78K/0S Series Hardware Tools
■Common Hardware Tools
Tool name Product name
In-circuit emulator IE-78K0S-NS
Power supply unit IE-70000-MC-PS-B
Interface adapter IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
IE-70000-CD-IF-A for PCMCIA socket
■List of Hardware Tools (1/2)
Target device Conversion socket/
Emulation board Emulation probe Conversion adapter/
Subseries name Package Flexible board
µ
PD789014 28-pin SDIP (400 mil) IE-789014-NS-EM1 NP-28CT∗ –
28-pin SOP (375 mil) NP-28GT∗AXS628119P∗
AXS662821∗
µ
PD789026 42-pin SDIP (600 mil) IE-789026-NS-EM1 NP-42CU∗ –
44-pin QFP (10 × 10) NP-44GB∗EV-9200G-44
µ
PD789046 44-pin QFP (10 × 10) IE-789046-NS-EM1 NP-44GB∗EV-9200G-44
µ
PD789104A★28-pin SDIP (400 mil) IE-789136-NS-EM1 NP-28CT∗ –
30-pin SSOP (300 mil) NP-36GS∗NGS-30∗
(attached to NP-36GS
∗
)
µ
PD789114A★28-pin SDIP (400 mil) IE-789136-NS-EM1 NP-28CT∗ –
30-pin SSOP (300 mil) NP-36GS∗NGS-30∗
(attached to NP-36GS
∗
)
µ
PD789124A★28-pin SDIP (400 mil) IE-789136-NS-EM1 NP-28CT∗ –
30-pin SSOP (300 mil) NP-36GS∗NGS-30∗
(attached to NP-36GS
∗
)
∗: This is a product of Naito Densei Machida Mfg. Co., Ltd. ★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 117
Development Tools
78K/0S Series Hardware Tools
■List of Hardware Tools (2/2)
Target device Conversion socket/
Emulation board Emulation probe Conversion adapter/
Subseries name Package Flexible board
µ
PD789134A★28-pin SDIP (400 mil) IE-789136-NS-EM1 NP-28CT∗1 –
30-pin SSOP (300 mil) NP-36GS∗1NGS-30∗1
(attached to NP-36GS
∗1
)
µ
PD789167★44-pin QFP (10 × 10) IE-789177-NS-EM1★NP-44GB∗1EV-9200G-44
µ
PD789177★44-pin QFP (10 × 10) IE-789177-NS-EM1★NP-44GB∗1EV-9200G-44
µ
PD789407A 80-pin QFP (14 × 14) IE-789418-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD789417A 80-pin QFP (14 × 14) IE-789418-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD789800 42-pin SDIP (600 mil) IE-789801-NS-EM1 NP-42CU∗1 –
44-pin QFP (10 × 10) NP-44GB∗1EV-9200G-44
µ
PD789830★88-pin bare chip IE-789831-NS-EM1 – –
µ
PD78F9831★100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD789842★44-pin QFP (10 × 10) IE-789840-NS-EM1 NP-44GB∗1EV-9200G-44
★: Under development
∗1: This is a product of Naito Densei Machida Mfg. Co., Ltd.
∗2: This is a product of Tokyo Eletech Corporation.
Microcomputer
118 Selection Guide X10679EJHV0SG00
Development Tools
78K/0 Series Software Tools
■List of Software Tools
Host machine Software tool name
PC-9800 Series Assembler package RA78K0
IBM PC/AT and compatibles C compiler CC78K0
PC98-NX Series C library source file CC78K0-L
Integrated debugger ID78K0-NS
Integrated debugger ID78K0
System simulator SM78K0
Real-time OS RX78K/0
Embedded OS MX78K0
EWS Assembler package RA78K0
C compiler CC78K0
C library source file CC78K0-L
Integrated debugger ID78K0
■List of Device Files
Subseries name Device file name
µ
PD78018F DF78014
µ
PD78018FY
µ
PD78014H
µ
PD78044F DF78044
µ
PD78044H
µ
PD78054 DF78054
µ
PD78054Y
µ
PD78058F DF78054
µ
PD78058FY
µ
PD78064 DF78064
µ
PD78064Y
µ
PD78064B
µ
PD78070A DF78078
µ
PD78070AY
Subseries name Device file name
µ
PD78078 DF78078
µ
PD78078Y
µ
PD78075B
µ
PD78083 DF78083
µ
PD78098B DF78098
µ
PD780018AY DF780018
µ
PD780024A DF780024
µ
PD780024AY
µ
PD780034A DF780034
µ
PD780034AY
µ
PD780058 DF780058
µ
PD780058Y★
µ
PD780065★DF780066★
µ
PD780208 DF780208
Subseries name Device file name
µ
PD780232 DF780233
µ
PD780308 DF780308
µ
PD780308Y (
µ
SxxxxDF78064)
µ
PD780701Y★DF780701★
µ
PD780833Y★DF780831★
µ
PD780948★DF780948★
µ
PD780955★DF780955
µ
PD780958★DF780958★
µ
PD780973★DF780974
µ
PD780988 DF780988
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 119
Development Tools
78K/0 Series Hardware Tools
(1) When using the in-circuit emulator IE-78K0-NS
■Common Hardware Tools (When using IE-78K0-NS)
Tool name Product name
In-circuit emulator IE-78K0-NS
Performance board IE-78K0-NS-PA★
Power supply unit IE-70000-MC-PS-B
Interface adapter IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
IE-70000-CD-IF-A for PCMCIA socket
■List of Hardware Tools (When using IE-78K0-NS) (1/3)
Target device Emulation board Conversion socket/
Emulation probe Conversion adapter/
Subseries name Package I/O board Flexible board
µ
PD78018F 64-pin SDIP (750 mil) IE-78018-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
µ
PD78018FY 64-pin SDIP (750 mil) IE-78018-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
µ
PD78014H 64-pin SDIP (750 mil) IE-78018-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
µ
PD78044F 80-pin QFP (14 × 20) IE-78048-NS-EM1 NP-80GF∗1TGF-080RAW∗2
µ
PD78044H 80-pin QFP (14 × 20) IE-78048-NS-EM1 NP-80GF∗1TGF-080RAW∗2
µ
PD78054 80-pin QFP (14 × 14) IE-780308-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) IE-780308-NS-EM1 NP-80GK∗1TGK-080SDW∗2
µ
PD78054Y 80-pin QFP (14 × 14) IE-780308-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) IE-780308-NS-EM1 NP-80GK∗1TGK-080SDW∗2
µ
PD78058F 80-pin QFP (14 × 14) IE-780308-NS-EM1 NP-80GC∗1EV-9200GC-80
µ
PD78058FY 80-pin QFP (14 × 14) IE-780308-NS-EM1 NP-80GC∗1EV-9200GC-80
★: Under development
∗1: This is a product of Naito Densei Machida Mfg. Co., Ltd.
∗2: This is a product of Tokyo Eletech Corporation.
Microcomputer
120 Selection Guide X10679EJHV0SG00
Development Tools
78K/0 Series Hardware Tools
■List of Hardware Tools (When using IE-78K0-NS) (2/3)
Target device Emulation board Conversion socket/
Emulation probe Conversion adapter/
Subseries name Package I/O board Flexible board
µ
PD78064 100-pin SDIP (14 × 20) IE-780308-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78064Y 100-pin QFP (14 × 20) IE-780308-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78064B 100-pin QFP (14 × 20) IE-780308-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78070A 100-pin QFP (14 × 20) IE-78078-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78070AY 100-pin QFP (14 × 20) IE-78078-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78078 100-pin QFP (14 × 20) IE-78078-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78078Y 100-pin QFP (14 × 20) IE-78078-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78075B 100-pin QFP (14 × 20) IE-78078-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD78083 42-pin SDIP (600 mil) IE-78078-NS-EM1 NP-42CU∗1 –
44-pin QFP (10 × 10) NP-44GB∗1EV-9200G-44
µ
PD78098B 80-pin QFP (14 × 14) Not supported. Use IE-78001-R-A for these devices.
µ
PD780018AY 100-pin QFP (14 × 20) IE-780018-NS-EM1 NP-100GF∗1EV-9200GF-100
µ
PD780024A 64-pin SDIP (750 mil) IE-780034-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
µ
PD780024AY 64-pin SDIP (750 mil) IE-780034-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
µ
PD780034A 64-pin SDIP (750 mil) IE-780034-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
µ
PD780034AY 64-pin SDIP (750 mil) IE-780034-NS-EM1 NP-64CW∗1 –
64-pin QFP (14 × 14) NP-64GC∗1EV-9200GC-64
64-pin LQFP (12 × 12) NP-64GK∗1TGK-064SBW∗2
∗1: This is a product of Naito Densei Machida Mfg. Co., Ltd.
∗2: This is a product of Tokyo Eletech Corporation.
Microcomputer
Selection Guide X10679EJHV0SG00 121
Development Tools
78K/0 Series Hardware Tools
■List of Hardware Tools (When using IE-78K0-NS) (3/3)
Target device Emulation board Conversion socket/
Emulation probe Conversion adapter/
Subseries name Package I/O board Flexible board
µ
PD780058 80-pin QFP (14 × 14) IE-780308-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD780058Y★80-pin QFP (14 × 14) IE-780308-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD780065★80-pin QFP (14 × 14) IE-780066-NS-EM4★NP-80GC∗1EV-9200GC-80
IE-78K0-NS-P01
µ
PD780208 100-pin QFP (14 × 20) IE-780208-NS-EM1 NP-100GF∗1EV-9200GF-100
µ
PD780232 80-pin QFP (14 × 14) IE-780233-NS-EM4★NP-80GC∗1EV-9200GC-80
IE-78K0-NS-P01
µ
PD780308 100-pin QFP (14 × 20) IE-780308-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD780308Y 100-pin QFP (14 × 20) IE-780308-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD780701Y★80-pin QFP (14 × 14) IE-780701-NS-EM1★NP-80GC∗1EV-9200GC-80
µ
PD780833Y★80-pin QFP (14 × 14) IE-780831-NS-EM4 NP-80GC∗1EV-9200GC-80
IE-78K0-NS-P02
µ
PD780948★100-pin QFP (14 × 20) Not supported. Use IE-78001-R-A for these devices.
µ
PD780955★80-pin QFP (14 × 20) We, NEC, will support each requirement for the development environment of this
subseries’ devices. Please contact an NEC sales representative.
µ
PD780958★100-pin LQFP (14 × 14) IE-780958-NS-EM4★NP-100GC∗1TGC-100SDW∗2
IE-78K0-NS-P01
µ
PD780973★80-pin QFP (14 × 20) IE-780974-NS-EM1★NP-80GF∗1EV-9200G-80
µ
PD780988 64-pin SDIP (750 mil) IE-780988-NS-EM4 NP-64CW∗1 –
64-pin QFP (14 × 14) IE-780K0-NS-P01 NP-64GC∗1EV-9200GC-64
∗1: This is a product of Naito Densei Machida Mfg. Co., Ltd.
∗2: This is a product of Tokyo Eletech Corporation.
★: Under development
Microcomputer
122 Selection Guide X10679EJHV0SG00
Development Tools
78K/0 Series Hardware Tools
(2) When using the in-circuit emulator IE-78001-R-A
■Common Hardware Tools (When using IE-78001-R-A)
Tool name Product name
In-circuit emulator IE-78001-R-A
Interface adapter IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
■List of Hardware Tools (When using IE-78001-R-A) (1/3)
Target device Emulation board Conversion socket/
I/O board Emulation probe Conversion adapter/
Subseries name Package Emulation probe conversion board Flexible board
µ
PD78018F 64-pin SDIP (750 mil) IE-78014-R-EM-A EP-78240CW-R –
64-pin QFP (14 × 14) EP-78240GC-R EV-9200GC-64
64-pin LQFP (12 × 12) EP-78012GK-R TGK-064SBW∗
µ
PD78018FY 64-pin SDIP (750 mil) IE-78014-R-EM-A EP-78240CW-R –
64-pin QFP (14 × 14) EP-78240GC-R EV-9200GC-64
64-pin LQFP (12 × 12) EP-78012GK-R TGK-064SBW∗
µ
PD78014H 64-pin SDIP (750 mil) IE-78014-R-EM-A EP-78240CW-R –
64-pin QFP (14 × 14) EP-78240GC-R EV-9200GC-64
64-pin LQFP (12 × 12) EP-78012GK-R TGK-064SBW∗
µ
PD78044F 80-pin QFP (14 × 20) IE-78044-R-EM EP-78130GF-R EV-9200G-80
µ
PD78044H 80-pin QFP (14 × 20) IE-78044-R-EM EP-78130GF-R EV-9200G-80
µ
PD78054 80-pin QFP (14 × 14) IE-780308-R-EM EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-78054GK-R TGK-080SDW∗
µ
PD78054Y 80-pin QFP (14 × 14) IE-780308-R-EM EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-78054GK-R TGK-080SDW∗
µ
PD78058F 80-pin QFP (14 × 14) IE-780308-R-EM EP-78230GC-R EV-9200GC-80
µ
PD78058FY 80-pin QFP (14 × 14) IE-780308-R-EM EP-78230GC-R EV-9200GC-80
µ
PD78064 100-pin QFP (14 × 20) IE-780308-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78064Y 100-pin QFP (14 × 20) IE-780308-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78064B 100-pin QFP (14 × 20) IE-780308-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
∗: This is a product of Tokyo Eletech Corporation.
Microcomputer
Selection Guide X10679EJHV0SG00 123
Development Tools
78K/0 Series Hardware Tools
■List of Hardware Tools (When using IE-78001-R-A) (2/3)
∗: This is a product of Tokyo Eletech Corporation.
Target device Emulation board Conversion socket/
I/O board Emulation probe Conversion adapter/
Subseries name Package Emulation probe conversion board Flexible board
µ
PD78070A 100-pin QFP (14 × 20) IE-78078-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78070AY 100-pin QFP (14 × 20) IE-78078-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78078 100-pin QFP (14 × 20) IE-78078-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78078Y 100-pin QFP (14 × 20) IE-78078-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78075B 100-pin QFP (14 × 20) IE-78078-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD78083 42-pin SDIP (600 mil) IE-78078-R-EM EP-78083CU-R –
44-pin QFP (10 × 10) EP-78083GB-R EV-9200G-44
µ
PD78098B 80-pin QFP (14 × 14) IE-780908-R-EM EP-78230GC-R EV-9200GC-80
µ
PD780018AY 100-pin QFP (14 × 20) IE-780018-R-EM EP-78064GF-R EV-9200GF-100
µ
PD780024A 64-pin SDIP (750 mil) IE-780034-NS-EM1 EP-78240CW-R –
64-pin QFP (14 × 14) IE-78K0-R-EX1 EP-78240GC-R EV-9200GC-64
64-pin LQFP (14 × 14) EP-78012GK-R TGK-064SBW∗
µ
PD780024AY 64-pin SDIP (750 mil) IE-780034-NS-EM1 EP-78240CW-R –
64-pin QFP (14 × 14) IE-78K0-R-EX1 EP-78240GC-R EV-9200GC-64
64-pin LQFP (12 × 12) EP-78012GK-R TGK-064SBW∗
µ
PD780034A 64-pin SDIP (750 mil) IE-780034-NS-EM1 EP-78240CW-R –
64-pin QFP (14 × 14) IE-78K0-R-EX1 EP-78240GC-R EV-9200GC-64
64-pin LQFP (12 × 12) EP-78012GK-R TGK-064SBW∗
µ
PD780034AY 64-pin SDIP (750 mil) IE-780034-NS-EM1 EP-78240CW-R –
64-pin QFP (14 × 14) IE-78K0-R-EX1 EP-78240GC-R EV-9200GC-64
64-pin LQFP (12 × 12) EP-78012GK-R TGK-064SBW∗
µ
PD780058 80-pin QFP (14 × 14) IE-780308-R-EM EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-78054GK-R TGK-080SDW∗
µ
PD780058Y★80-pin QFP (14 × 14) IE-780308-R-EM EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-78054GK-R TGK-080SDW∗
★: Under development
Microcomputer
124 Selection Guide X10679EJHV0SG00
Development Tools
78K/0 Series Hardware Tools
■List of Hardware Tools (When using IE-78001-R-A) (3/3)
∗: This is a product of Tokyo Eletech Corporation.
Target device Emulation board Conversion socket/
I/O board Emulation probe Conversion adapter/
Subseries name Package Emulation probe conversion board Flexible board
µ
PD780065★80-pin QFP (14 × 14) IE-780066-NS-EM4★EP-78230GC-R EV-9200GC-80
IE-78K0-NS-P01
IE-78K0-R-EX1
µ
PD780208 100-pin QFP (14 × 20) IE-780208-R-EM EP-78064GF-R EV-9200GF-100
µ
PD780232 80-pin QFP (14 × 14) IE-780233-NS-EM4★EP-78230GC-R EV-9200GC-80
IE-78K0-NS-P01
IE-78K0-R-EX1
µ
PD780308 100-pin QFP (14 × 20) IE-780308-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD780308Y 100-pin QFP (14 × 20) IE-780308-R-EM EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) EP-78064GC-R TGC-100SDW∗
µ
PD780701Y★80-pin QFP (14 × 14) IE-780701-NS-EM1★EP-78230GC-R EV-9200GC-80
IE-78K0-R-EX1
µ
PD780833Y★80-pin QFP (14 × 14) IE-780831-NS-EM4 EP-78230GC-R EV-9200GC-80
IE-78K0-NS-P02
IE-78K0-R-EX1
µ
PD780948★100-pin QFP (14 × 20) IE-780948-SL-EM1 EP-100GF-SL TQPACK100RB∗ or
IE-780948-SL-EM4 YQPACK100RB∗ +
NQPACK100RB∗
µ
PD780955★80-pin QFP (14 × 20) We, NEC, will support each requirement for the development environment of this
subseries’ devices. Please contact an NEC sales representative.
µ
PD780958★100-pin LQFP (14 × 14) IE-780958-NS-EM4★EP-78064GC-R TGC-100SDW∗
IE-78K0-NS-P01
IE-78K0-R-EX1
µ
PD780973★80-pin QFP (14 × 20) IE-780974-NS-EM1★EP-78130GF-R EV-9200G-80
IE-78K0-R-EX1
µ
PD780988 64-pin SDIP (750 mil) IE-780988-NS-EM4 EP-78024CW-R –
IE-78K0-NS-P01
64-pin QFP (14 × 14) IE-78K0-R-EX1 EP-78240GC-R EV-9200GC-64
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 125
Development Tools
78K/IV Series Software Tools
■List of Software Tools
Host machine Software tool name
PC-9800 Series Assembler package RA78K4
IBM PC/AT and compatibles C compiler CC78K4
PC98-NX Series C library source file CC78K4-L
Integrated debugger ID78K4-NS
Integrated debugger ID78K4
System simulator SM78K4
System performance analyzer AZ78K4
Real-time OS RX78K4
Embedded OS MX78K4
EWS Assembler package RA78K4
C compiler CC78K4
C library source file CC78K4-L
Integrated debugger ID78K4
■List of Device Files
Subseries name Device file name
µ
PD784038 DF784038
µ
PD784038Y
µ
PD784046 DF784046
µ
PD784054
µ
PD784216 DF784218
µ
PD784216Y
Subseries name Device file name
µ
PD784218 DF784218
µ
PD784218Y
µ
PD784225★DF784225
µ
PD784225Y★
µ
PD784908 DF784908
µ
PD784915 DF784916
Subseries name Device file name
µ
PD784928 DF784928
µ
PD784928Y
µ
PD784938★DF784937★
µ
PD784955★DF784956
★: Under development
Microcomputer
126 Selection Guide X10679EJHV0SG00
Development Tools
78K/IV Series Hardware Tools
(1) When using the in-circuit emulator IE-78K4-NS
■Common Hardware Tools (When using IE-78K4-NS)
Tool name Product name
In-circuit emulator IE-78K4-NS
Power supply unit IE-70000-MC-PS-B
Interface adapter IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
IE-70000-CD-IF-A for PCMCIA socket
■List of Hardware Tools (When using IE-78K4-NS)
Target device Conversion socket/
Emulation board Emulation probe Conversion adapter/
Subseries name Package Flexible board
µ
PD784038 80-pin QFP (14 × 14) IE-784038-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD784038Y 80-pin QFP (14 × 14) IE-784038-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD784046 80-pin QFP (14 × 14) IE-784046-NS-EM1 NP-80GC∗1EV-9200GC-80
µ
PD784054 80-pin QFP (14 × 14) IE-784046-NS-EM1 NP-80GC∗1EV-9200GC-80
µ
PD784216 100-pin QFP (14 × 20) IE-784225-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD784216Y 100-pin QFP (14 × 20) IE-784225-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD784218 100-pin QFP (14 × 20) IE-784225-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD784218Y 100-pin QFP (14 × 20) IE-784225-NS-EM1 NP-100GF∗1EV-9200GF-100
100-pin LQFP (14 × 14) NP-100GC∗1TGC-100SDW∗2
µ
PD784225★80-pin QFP (14 × 14) IE-784225-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD784225Y★80-pin QFP (14 × 14) IE-784225-NS-EM1 NP-80GC∗1EV-9200GC-80
80-pin TQFP (12 × 12) NP-80GK∗1TGK-080SDW∗2
µ
PD784908 100-pin QFP (14 × 20) IE-784908-NS-EM1 NP-100GF∗1EV-9200GF-100
µ
PD784915 100-pin QFP (14 × 20) IE-784928-NS-EM1 EP-784928GF-NS NEV-921GF-100
µ
PD784928 100-pin QFP (14 × 20) IE-784928-NS-EM1 EP-784928GF-NS NEV-921GF-100
µ
PD784928Y 100-pin QFP (14 × 20) IE-784928-NS-EM1 EP-784928GF-NS NEV-921GF-100
µ
PD784938★100-pin QFP (14 × 20) IE-784937-NS-EM1 NP-100GF∗1EV-9200GF-100
µ
PD784955★80-pin QFP (14 × 14) IE-784956-NS-EM1 NP-80GC∗1EV-9200GC-80
∗1: This is a product of Naito Densei Machida Mfg. Co., Ltd.
∗2: This is a product of Tokyo Eletech Corporation.
★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 127
Development Tools
78K/IV Series Hardware Tools
(2) When using the in-circuit emulator IE-784000-R
■Common Hardware Tools (When using IE-784000-R)
Tool name Product name
In-circuit emulator IE-784000-R
Emulation board IE-784000-R-EM
Interface board IE-70000-98-IF-C for C bus of PC-9800 Series
IE-70000-PC-IF-C for ISA bus of PC/AT and compatibles
IE-70000-PCI-IF for PCI bus
IE-70000-CD-IF-A for PCMCIA socket
■List of Hardware Tools (When using IE-784000-R) (1/2)
Target device I/O emulation board Conversion socket/
(emulation board) Emulation probe Conversion adapter/
Subseries name Package Emulation probe conversion board Flexible board
µ
PD784038 80-pin QFP (14 × 14) IE-784038-R-EM1 EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-78054GK-R TGK-080SDW∗
µ
PD784038Y 80-pin QFP (14 × 14) IE-784038-R-EM1 EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) EP-78054GK-R TGK-080SDW∗
µ
PD784046 80-pin QFP (14 × 14) IE-784046-R-EM1 EP-78230GC-R EV-9200GC-80
µ
PD784054 80-pin QFP (14 × 14) IE-784046-R-EM1 EP-78230GC-R EV-9200GC-80
µ
PD784216 100-pin QFP (14 × 20) IE-784225-NS-EM1 EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) IE-78K4-R-EX3 EP-78064GC-R TGC-100SDW∗
∗: This is a product of Tokyo Eletech Corporation.
Microcomputer
128 Selection Guide X10679EJHV0SG00
Development Tools
78K/IV Series Hardware Tools
■List of Hardware Tools (When using IE-784000-R) (2/2)
Target device I/O emulation board Conversion socket/
(emulation board) Emulation probe Conversion adapter/
Subseries name Package Emulation probe conversion board Flexible board
µ
PD784216Y 100-pin QFP (14 × 20) IE-784225-NS-EM1 EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) IE-78K4-R-EX3 EP-78064GC-R TGC-100SDW∗
µ
PD784218 100-pin QFP (14 × 20) IE-784225-NS-EM1 EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) IE-78K4-R-EX3 EP-78064GC-R TGC-100SDW∗
µ
PD784218Y 100-pin QFP (14 × 20) IE-784225-NS-EM1 EP-78064GF-R EV-9200GF-100
100-pin LQFP (14 × 14) IE-78K4-R-EX3 EP-78064GC-R TGC-100SDW∗
µ
PD784225★80-pin QFP (14 × 14) IE-784225-NS-EM1 EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) IE-78K4-R-EX2 EP-78054GK-R TGK-080SDW∗
µ
PD784225Y★80-pin QFP (14 × 14) IE-784225-NS-EM1 EP-78230GC-R EV-9200GC-80
80-pin TQFP (12 × 12) IE-78K4-R-EX2 EP-78054GK-R TGK-080SDW∗
µ
PD784908 100-pin QFP (14 × 20) IE-784908-R-EM1 EP-784915GF-R EV-9200GF-100
µ
PD784915 100-pin QFP (14 × 20) IE-784928-NS-EM1 EP-784928GF-NS EV-9200GF-100
IE-78K4-R-EX3
µ
PD784928 100-pin QFP (14 × 20) IE-784928-NS-EM1 EP-784928GF-NS EV-9200GF-100
IE-78K4-R-EX3
µ
PD784928Y 100-pin QFP (14 × 20) IE-784928-NS-EM1 EP-784928GF-NS EV-9200GF-100
IE-78K4-R-EX3
µ
PD784938★100-pin QFP (14 × 20) IE-784937-NS-EM1 EP-78064GF-R EV-9200GF-100
IE-78K4-R-EX3
µ
PD784955★80-pin QFP (14 × 14) IE-784956-NS-EM1 EP-784915GF-R EV-9200GC-80
IE-78K4-R-EX2
∗: This is a product of Tokyo Eletech Corporation. ★: Under development
Microcomputer
Selection Guide X10679EJHV0SG00 129
Development Tools
V810 Family Development Tools
■List of Software Tools
Product name Target device Host machine
Real-time OS RX732 V821 PC-9800 Series
IBM PC/AT and compatibles
SPARCstationTM
File system RX-FS732 PC-9800 Series
SPARCstation
Remark Please contact an NEC sales representative if you use host machines not mentioned above.
■List of Hardware Tools
Product name Target device Part number Remarks
In-circuit emulator V821 IE-70741-BX Conversion socket : TQPACK100SD∗ +
TQSOCKET100SDW∗ (essential)
Interface board IE-70000-98-IF-C For PC-9800 Series
IE-70000-PC-IF-C For IBM PC/AT and compatibles
Expansion memory IE-70000-BX-MM2 Expands 2M bytes of the emulation memory
board
External logic probe IE-70000-BX-EP Consists of one GND and eight external inputs
Conversion adapter / TQPACK100SD∗Probe included in the in-circuit emulator → 100-pin QFP
Conversion socket TQSOCKET100SDW∗
∗: This is a product of Tokyo Eletech Corporation.
V830 Family Development Tools
■List of Software Tools
Product name Target device Host machine
Real-time OS RX830 V830 Family PC-9800 Series
IBM PC/AT and compatibles
SPARCstation
Compiler CA830 V830 PC-9800 Series
V831 IBM PC/AT and compatibles
SPARCstation
System AZ830 V830 Family PC-9800 Series
performance IBM PC/AT and compatibles
analyzer
Device file DF705100 V830 PC-9800 Series
IBM PC/AT and compatibles
DF705101 V831 SPARCstation
Remark Please contact an NEC sales representative if you use host machines not mentioned above.
Hardwre tools are not provided. Please contact an NEC sales representative about the development environment of
the V830 Family.
Microcomputer
130 Selection Guide X10679EJHV0SG00
Development Tools
V850 Family Software Tools
■List of Software Tools
Product name Target device Host machine
Real-time OS RX850 V850 Family PC-9800 Series
RX850 pro IBM PC/AT and compatibles
SPARCstation
Compiler CA850 PC-9800 Series
IBM PC/AT and compatibles
SPARCstation
Debugger ID850 PC-9800 Series
IBM PC/AT and compatibles
Simulator SM850 PC-9800 Series
IBM PC/AT and compatibles
System AZ850 PC-9800 Series
performance IBM PC/AT and compatibles
analyzer
Device file DF703002 V852 PC-9800 Series
DF703003 V853 IBM PC/AT and compatibles
DF703008 V854 SPARCstation
DF703017 V850/SA1
DF703037 V850/SB1
V850/SB2
DF703102 V850E/MS1
Remark Please contact an NEC sales representative if you use host machines not mentioned above.
Microcomputer
Selection Guide X10679EJHV0SG00 131
Development Tools
V850 Family Hardware Tools
■List of Hardware Tools (1/2)
Product name Target device Part number Remarks
In-circuit emulator V850E/MS1 IE-703102-MC A PC interface cable, external logic probe, and conversion
V850/SA1, V850/SB1, IE-703002-MC sockets∗1 are included
V852, V853, V854
In-circuit emulator V850/SA1 IE-703017-MC-EM1 NQPACK100SD∗2 is included
option board V850/SB1, V850/SB2 IE-703037-MC-EM1★Conversion socket not included (the V850/SB2 version is
under development)
V853 IE-703003-MC-EM1 NQPACK100SD∗2 is included
V854 IE-703008-MC-EM1 NQPACK144SD∗2, YQPACK144SD∗2, HQPACK144SD∗2,
and YQGUIDE∗2 are included
V850E/MS1 IE-703102-MC-EM1★For 5V, conversion socket not included
IE-703102-MC-EM1-A★For 3.3V, conversion socket not included
Power supply unit V850/SA1, V850/SB1, IE-70000-MC-PS-B Power supply cable for AC100 to 240V is included
V850/SB2, V850E/MS1,
V852, V853, V854
PC Interface board V850/SA1, V850/SB1, IE-70000-98-IF-B or For PC-9800 (C bus)∗3
V850/SB2, V850E/MS1, IE-70000-98-IF-C
V852, V853, V854 IE-70000-PC-IF-B or For IBM PC/AT and compatibles (ISA bus)∗3
IE-70000-PC-IF-C
IE-70000-CD-IF-A For PCMCIA socket∗4
IE-70000-PCI-IF For PCI bus∗4
∗1: The following conversion sockets, which are products of Tokyo Eletech Corporation, are included.
IE-703102-MC : NQPACK144SD, YQPACK144SD, HQPACK144SD, YQGUIDE
IE-703002-MC : NQPACK100SD, YQPACK100SD, HQPACK100SD, YQSOCKET100SDN, YQGUIDE
∗2: This is a product of Tokyo Eletech Corporation.
∗3: Not available for PC98-NX Series.
∗4: Available for PC98-NX Series.
★: Under development
Microcomputer
132 Selection Guide X10679EJHV0SG00
Development Tools
∗: This is a product of Tokyo Eletech Corporation.
Product name Target device Part number Remarks
Conversion V850/SA1 CSPACK121A1312N02∗Conversion socket for 121-pin FPBGA
adapter/ CSICE121A1312N02∗Conversion adapter for 121-pin FPBGA
conversion CSPACK121A1312N02∗ is necessary when using this
socket V850/SA1, V850/SB1, NQPACK100SD∗Conversion socket for target board (for 100-pin QFP (0.5-mm
V850/SB2, V852, V853 pitch))
YQPACK100SD∗Conversion socket for connection to an in-circuit emulator
HQPACK100SD∗Cover of the socket for 100-pin QFP
YQSOCKET100SDN∗Socket for spacer
YQGUIDE∗Fixing screws
V850/SB1, V850/SB2 NEXB-100SD/RB∗100-pin GC-GF conversion board
NQPACK100RB∗Conversion socket for target board (for 100-pin QFP (14 × 20
mm, 0.65-mm pitch))
YQPACK100RB∗Conversion socket for connection to an in-circuit emulator
HQPACK100RB∗Cover of the socket for 100-pin QFP
YQSOCKET100RBN∗Socket for spacer
YQGUIDE∗Fixing screws
V850E/MS1, V854 NQPACK144SD∗Conversion socket for target board (for 144-pin QFP
(0.5-mm pitch))
YQPACK144SD∗Conversion socket for connection to an in-circuit emulator
HQPACK144SD∗Cover of the socket for 144-pin QFP
YQSOCKET144SDN∗Socket for spacer
YQGUIDE∗Fixing screws
V850E/MS1 CSPACK157A1614N01∗Conversion socket for 157-pin FPBGA
CSICE157A1614N01∗Conversion adapter for 157-pin FPBGA
CSPACK157A1614N01∗ is necessary when using this
Expansion probe V850/SA1, V850/SB1, SC-100SDN∗Expansion probe for 100-pin QFP (0.5-mm pitch)
V850/SB2, V852, V853
V850E/MS1, V854 SC-144SDN∗Expansion probe for 144-pin QFP (0.5-mm pitch)
V850 Family Hardware Tools
■List of Hardware Tools (2/2)
Microcomputer
Selection Guide X10679EJHV0SG00 133
Development Tools
VR Series Development Tools
■List of Software Tools
Product name Target device Host machine
Real-time OS RX4000 VR4100 SeriesTM PC-9800 Series
VR4300 SeriesTM IBM PC/AT and compatibles
Software tools Hardware tools
Operating system Evaluation board
Real-time OS ROM emulator
Optimization compiler
Source debugger
Other than above, tools as follows are also provided by development tool makers for VR Series.
Microcomputer
134 Selection Guide X10679EJHV0SG00
Middleware
Middleware that Holds the Key to Multimedia
Various key technologies are needed to realize multimedia applications, such as a human-machine interface as
speech recognition, and data compression/decompression including data communications. And these technologies
require high-performance RISC microcomputers capable of high-speed data processing. The V800 Series and VR
Series answer these requirements with powerful CPU performance complemented by middleware support based on
multimedia performance.
■The positioning of middleware
Software integration Hardware integration
• User programs CPU
• Middleware Memory
Human interface (speech recognition, handwritten Standard macro
character recognition, etc.) Dedicated macro
Internet Analog circuit
Multimedia signal processing (JPEG, voice compression, User logic
moving picture processing)
Communication (modem, mobile communications, etc.)
■Features
Reduced overall costs due to shorter TAT development and lower development costs
If middleware that has been optimized to the CPU architecture is used, the amount of time taken to develop
each individual system can be markedly reduced. Moreover, as there is no need to use dedicated devices, the
cost is further streamlined.
Improved CPU performance
The CPU, due to the improvement in CPU performance, can now easily realize applications that could previously
only be performed by dedicated hardware or personal computers/workstations. The addition, modification and
deletion of functions difficult to perform with hardware, as well as the organization of user-friendly interfaces
have now been made simpler.
Spread of Internet and multimedia signal-processing applications
Through the popularity of the Internet, the management of multimedia information such as picture images and
speech has expanded considerably. To employ dedicated hardware to process this information would take a
large-scale system and considerable cost. By using middleware, the processing of this information can be easily
realized by the CPU alone.
Microcomputer
Selection Guide X10679EJHV0SG00 135
Middleware
Middleware Development Framework
NEC middleware will gradually develop into optimal processor for each system. Furthermore, NEC plans to realize
standardized middleware by using not only NEC's uniquely developed technologies, but also the most outstanding
third party technologies and standards.
Standards NEC's unique
technologies Cooperation with
third parties
Middleware creation
Build up of middleware solutions
RISC
DSP
V830 Family
V850 Family
V
R
4300 Series
TM
V
R
4100 Series
TM
PD77016
µ
Next generation processor
Planning
Feasibility
study
Development
Mass
Production
Development support
framework
System advice
Demonstration
Performance evaluation
Hardware/
software
division
Embedded support
Customization
Microcomputer
136 Selection Guide X10679EJHV0SG00
Middleware
Middleware Road Map
Communication
W-CDMA
Modem
IrDA
JBIG
Developed
1999
2000
or later
Echo Canceller
MH/MR/MMR
USB/1394
xDSL
MPEG7
MPEG-4
Audio (MPEG-2 AAC)
MPEG-4/Speech
G.729
ADPCM
JPEG TCP/IP
JAVA+ITRON
Browser
TrueSpeechTM8.5
Multimedia
Internet
Human
Interface
Watermark
Agent System
Speech Recognition (Multilingual)
Text To Speech (Multilingual)
Speech Recognition (Japanese)
Text To Speech (Japanese) Handwritten Character Recognition
Developed 1999 2000 or later
Image Recognition
Automatic
Interpreter
Security
JAVA support
of Middleware
V800 Series
Field Middleware V830 Family V850 Family VR Series
Image MH/MR/MMR
JBIG
JPEG
Speech Text To Speech Japanese
Multilingual Version (TTS3000∗1)––
English∗2––
TrueSpeech8.5 –
G.726 (ADPCM) Sample
G.729/AnnexA/B – –
MPEG-4/Speech (CELP) – –
Echo Canceller (for Hands-free operation) –
Sound MPEG-4 Audio (MPEG-2 AAC) –
Recognition Speech Recognition Multilingual Version (ASR1600/C∗1)–
English∗2––
Japanese (large vocabulary) –
Handwritten Character Recognition
Internet Browser
(Third party products) JAVA –
TCP/IP
Interface lrDA protocol stack∗3
∗1: English/German/French/Italian/Dutch/Spanish (Jointly developed with L&H Inc.)
∗2: WindowsCE supported
∗3: This is a product of Okaya Systemware Co., Ltd.
Remark : Developed, : Under Development, : Under Planning
Middleware Products
Selection Guide X10679EJHV0SG00 137
IC Memory
Dynamic RAM ................................................................. 138
Dynamic RAM Module ................................................... 142
Static RAM....................................................................... 146
Mask ROM ....................................................................... 151
COMBO Memory............................................................. 152
Flash Memory ................................................................. 152
MCP (Flash Memory + SRAM) ...................................... 153
Other ................................................................................ 153
• Line Buffer .................................................................. 153
2
IC Memory
138 Selection Guide X10679EJHV0SG00
■Synchronous DRAM: SDR (Single Data Rate) (1/3)
Dynamic RAM
Density
(bits)
Organization
(words
× bits
×banks)
Part number Package Remark
Speed
grade Interface
level
/CAS
latency
Clock
frequency
(MHz)
Supply
voltage
(V)
Clock
access
time
MAX.
(ns)
Self
refresh
current
MAX.
(mA)
Refresh
cycle
(cycles
/ms)
256M
★
16M×4×4 A75
A80
A10
A10B
A80L
A10L
A10BL
µ
PD45256441 3
3
2
3
2
3
2
3
2
3
2
3
2
133
125
100
100
77
100
67
125
100
100
77
100
67
5.4
6
7
8
6
7
8
2
1
3.3±0.3 8K/64 LVTTL PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
G5:
54-pin
TSOP(II)
(400 mil)
★
: Under development
8M×8×4 A75
A80
A10
A10B
A80L
A10L
A10BL
µ
PD45256841 3
3
2
3
2
3
2
3
2
3
2
3
2
133
125
100
100
77
100
67
125
100
100
77
100
67
5.4
6
7
8
6
7
8
2
1
PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
4M×16×4 A80
A10
A10B
A80L
A10L
A10BL
µ
PD45256163 3
2
3
2
3
2
3
2
3
2
3
2
125
100
100
77
100
67
125
100
100
77
100
67
6
7
8
6
7
8
2
1
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
IC Memory
Selection Guide X10679EJHV0SG00 139
Dynamic RAM
■Synchronous DRAM: SDR (Single Data Rate) (2/3)
Density
(bits)
Organization
(words
× bits
×banks)
Part number Package Remark
Speed
grade Interface
level
/CAS
latency
Clock
frequency
(MHz)
Supply
voltage
(V)
Clock
access
time
MAX.
(ns)
Self
refresh
current
MAX.
(mA)
Refresh
cycle
(cycles
/ms)
128M 8M×4×4 A75
A80
A10
A10B
A80L
A10L
A10BL
µ
PD45128441 3
3
2
3
2
3
2
3
2
3
2
3
2
133
125
100
100
77
100
67
125
100
100
77
100
67
5.4
6
7
8
6
7
8
2
0.8
3.3±0.3 4K/64 LVTTL PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
G5:
54-pin
TSOP(II)
(400 mil)
4M×8×4 A75
A80
A10
A10B
A80L
A10L
A10BL
µ
PD45128841 3
3
2
3
2
3
2
3
2
3
2
3
2
133
125
100
100
77
100
67
125
100
100
77
100
67
5.4
6
7
8
6
7
8
2
0.8
PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
2M×16×4 A80
A10
A10B
A80L
A10L
A10BL
µ
PD45128163 3
2
3
2
3
2
3
2
3
2
3
2
125
100
100
77
100
67
125
100
100
77
100
67
6
7
8
6
7
8
2
0.8
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
IC Memory
140 Selection Guide X10679EJHV0SG00
■Synchronous DRAM: SDR (Single Data Rate)
Dynamic RAM
(3/3)
Density
(bits)
Organization
(words
× bits
×banks)
Part number Package Remark
Speed
grade Interface
level
/CAS
latency
Clock
frequency
(MHz)
Supply
voltage
(V)
Clock
access
time
MAX.
(ns)
Self
refresh
current
MAX.
(mA)
Refresh
cycle
(cycles
/ms)
64M 4M×4×4 A75
A80
A10
A10B
A80L
A10L
A10BL
µ
PD4564441 3
3
2
3
2
3
2
3
2
3
2
3
2
133
125
100
100
77
100
67
125
100
100
77
100
67
5.4
6
7
8
6
7
8
1
0.4
3.3±0.3 4K/64 LVTTL PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
G5:
54-pin
TSOP(II)
(400 mil)
2M×8×4 A75
A80
A10
A10B
A80L
A10L
A10BL
µ
PD4564841 3
3
2
3
2
3
2
3
2
3
2
3
2
133
125
100
100
77
100
67
125
100
100
77
100
67
5.4
6
7
8
6
7
8
1
0.4
PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
1M×16×4 A80
A10
A10B
A80L
A10L
A10BL
µ
PD4564163 3
2
3
2
3
2
3
2
3
2
3
2
125
100
100
77
100
67
125
100
100
77
100
67
6
7
8
6
7
8
1
0.4
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
512K×32×4
A80★
A10★
A10B
A80L★
A10L★
A10BL★
µ
PD4564323 3
2
3
2
3
2
3
2
3
2
3
2
125
100
100
77
100
67
125
100
100
77
100
67
6
7
8
6
7
8
1
0.4
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
G5:
86-pin
TSOP(II)
(400 mil)
★: Under development
IC Memory
Selection Guide X10679EJHV0SG00 141
■Virtual Channel Synchronous DRAM:SDR (Single Data Rate)
Dynamic RAM
■Synchronous DRAM: DDR (Double Data Rate)
■Direct RambusTM DRAM
Density
(bits)
Organization
(words
× bits
×banks)
Part number Package Remark
Speed
grade Interface
level
Read
latency
Clock
frequency
(MHz)
Supply
voltage
(V)
Clock
access
time
MAX.
(ns)
Refresh
cycle
(cycles
/ms)
64M 8M×4×2
4M×8×2
2M×16×2
A70★
A75
A10
A15
A70★
A75
A10
A15
A70★
A75
A10
A15
µ
µ
µ
PD4565421
PD4565821
PD4565161
2
1
2
1
2
1
143
133
100
67
143
133
100
67
143
133
100
67
5.4
5.4
6
12
5.4
5.4
6
12
5.4
5.4
6
12
3.3±0.3 4K/64 LVTTL G5:
54-pin TSOP(II)
(400 mil)
★: Under development
Density
(bits)
Organization
(words
× bits
×banks)
Part number Package Remark
Speed
grade Interface
level
/CAS
latency
Clock
frequency
(MHz)
Self
refresh
current
MAX.
(mA)
Refresh
cycle
(cycles
/ms)
128M 8M×4×4
4M×8×4
2M×16×4
C80
★
C10
C12
C80
★
C10
C12
C80
★
C10
C12
µ
µ
µ
PD45D128442
PD45D128842
PD45D128164
2.5
2
2.5
2
2.5
2
2.5
2
2.5
2
2.5
2
2.5
2
2.5
2
2.5
2
133
125
125
100
100
83
133
125
125
100
100
83
133
125
125
100
100
83
2
2.5±0.125
4K/64 SSTL_2 G5:
66-pin
TSOP(II)
(400 mil)
★
: Under development
Supply voltage (V)
2.5±0.125
VccQVcc
Density
(bits)
Organization
(words
× bits
×banks)
Part number Type Pin
configuration
Remark
Clock
frequency Access time Package
Maximum supply current (mA)
1/tCYCLE
(MHz)
tRAC
(ns)
Class Class Auto
Refresh
Self
Active
72M
128M
144M
256K×18×16
256K×16×32
256K×18×32
C80
C60
C80
C60
C80
C60
µ
µ
µ
PD488385
PD488448
PD488488
400
300
400
300
400
300
40
45
53
40
45
53
40
45
53
40
45
53
40
45
53
40
45
53
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
8K/32
2.5±0.13
BF1:Normal
• Normal
• Mirrored
• Normal
• Mirrored
Interface
level
Supply
voltage
(V)
Refresh
cycle
(cycles
/ms)
RSL FB:
74-pin
D2BGATM
FB:
62-pin
D2BGA
FB:
62-pin
D2BGA
IC Memory
142 Selection Guide X10679EJHV0SG00
■168-pin SDRAM DIMM (Dual In-line Memory Module): Unbuffered Type
Dynamic RAM Module
Density
(bytes)
Organization
(words
× bits) Part number Remark
Speed
grade /CAS
latency Mounted
devices
Clock
frequency
(MHz)
Inter-
face
level
Package
height
(mm/inch)
Bank
organi-
zation
Supply
voltage
(V)
Refresh
cycle
(cycles
/ms)
256M 32M×72
32M×64
2
2
A80
A10
A80
A10
µ
µ
MC-4532CC726
MC-4532CD646
3
2
3
2
3
2
3
2
125
100
100
77
125
100
100
77
3.3±0.3 4K/64 LVTTL PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
34.93/1.375 PD45128841G5
×18 pcs.
PD45128841G5
×16 pcs.
128M 16M×72
16M×64
2
2
2
2
A80
A10
A10B
A80
A10
A10B
µ
µ
µ
MC-4516CC726
MC-4516CC725
MC-4516CD646
MC-4516CD645
3
2
3
2
3
2
3
2
3
2
3
2
125
100
100
77
100
67
125
100
100
77
100
67
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
34.93/1.375
33.02/1.30
34.93/1.375
33.02/1.30
PD4564841G5
×18 pcs.
PD4564841G5
×16 pcs.
PD4564841G5
×16 pcs.
64M 8M×72
8M×64
1
1
1
1
A80
A10
A10B
A80
A10
A10B
µ
µ
MC-458CA726
MC-458CA725
MC-458CB646
MC-458CB645
3
2
3
2
3
2
3
2
3
2
3
2
125
100
100
77
100
67
125
100
100
77
100
67
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
34.93/1.375
31.75/1.25
34.93/1.375
31.75/1.25
PD4564841G5
×9 pcs.
PD4564841G5
×8 pcs.
32M 4M×72
4M×64
1
1
1
A80
A10
A10B
A80
A10B
µ
µ
MC-454CA726
MC-454CB646
MC-454CB645
3
2
3
2
3
2
3
2
3
2
125
100
100
77
125
100
100
77
100
67
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
—
34.93/1.375
34.93/1.375
29.21/1.15
PD4564163G5
×5 pcs.
PD4564163G5
×4 pcs.
IC Memory
Selection Guide X10679EJHV0SG00 143
■168-pin SDRAM DIMM (Dual In-line Memory Module): Registered Type
Dynamic RAM Module
Density
(bytes)
Organization
(words
× bits) Part number Remark
Speed
grade /CAS
latency Mounted
devices
Clock
frequency
(MHz)
Inter-
face
level
Package
height
(mm/inch)
Bank
organi-
zation
Supply
voltage
(V)
Refresh
cycle
(cycles
/ms)
512M
256M
128M
64M
32M
64M×72
32M×72
16M×72
8M×72
4M×72
2
1
1
1
1
A80
A10
A75
A80
A10
A75
A80
A10
A75
A80
A10
A80
A10
µ
µ
µ
µ
µ
MC-4564DC726
MC-4532DA727
MC-4532DA726
MC-4516DA727
MC-4516DA726
MC-458DA727
MC-458DA726
MC-454DA726
3
2
3
2
3
3
2
3
2
3
3
2
3
2
3
3
2
3
2
3
2
3
2
125
100
100
77
133
125
100
100
77
133
125
100
100
77
133
125
100
100
77
125
100
100
77
3.3±0.3 4K/64 LVTTL PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
PC133 Compliant
(3-3-3)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
PC100 Compliant
(2-2-2)
PC100 Compliant
(3-2-2)
43.18/1.70
38.1/1.50
PD45128441G5
×36 pcs.
PD45128441G5
×18 pcs.
PD4564441G5
×18 pcs.
PD4564841G5
×9 pcs.
PD4564163G5
×5 pcs.
IC Memory
144 Selection Guide X10679EJHV0SG00
■144-pin SDRAM SO DIMM (Small Outline Dual In-line Memory Module)
Dynamic RAM Module
Density
(bytes)
Organization
(words
× bits) Part number Remark
Speed
grade /CAS
latency Mounted
devices
Clock
frequency
(MHz)
Inter-
face
level
Package
height
(mm/inch)
Bank
organi-
zation
Supply
voltage
(V)
Refresh
cycle
(cycles
/ms)
128M 16M×64 1
2
2
A10B
A10BL
A10B
A10BL
A80
A10
µ
µ
MC-4516CB64ES
MC-4516CD64ES
MC-4516CD641ES
3
2
3
2
3
2
3
2
3
2
3
2
100
67
100
67
100
67
100
67
125
100
100
77
3.3±0.3 4K/64
Self
refresh
current
(mA)
16
6.4
16
6.4
16
LVTTL —
PC100 Compliant
(2-2-2), Rev.1.0
PC100 Compliant
(3-2-2), Rev.1.0
26.67/1.05
31.75/1.25
PD45128841G5
×8 pcs.
PD45128163G5
×8 pcs.
64M 8M×64 1
1
2
2
A10B
A10BL
A80
A10
A10B
A10BL
A80
A10
µ
µ
µ
MC-458CB64LSA
MC-458CB641ES
MC-458CD64LS
MC-458CD641LS
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
100
67
100
67
125
100
100
77
100
67
100
67
125
100
100
77
8
3.2
4
8
3.2
8
3.2
—
PC100 Compliant
(2-2-2), Rev.1.0
PC100 Compliant
(3-2-2), Rev.1.0
—
PC100 Compliant
(2-2-2), Rev.1.0
PC100 Compliant
(3-2-2), Rev.1.0
26.67/1.05
25.4/1.0
26.67/1.05
31.75/1.25
PD4564841G5
×8 pcs.
PD45128163G5
×4 pcs.
PD4564163G5
×8 pcs.
32M 4M×64 1 A10B
A10BL
A80
A10
µ
MC-454CB64LS
MC-454CB641LS
3
2
3
2
3
2
3
2
100
67
100
67
125
100
100
77
4
2
4
—
PC100 Compliant
(2-2-2), Rev.0.7
PC100 Compliant
(3-2-2), Rev.1.0
25.4/1.00
PD4564163G5
×4 pcs.
IC Memory
Selection Guide X10679EJHV0SG00 145
■168-pin Virtual Channel SDRAM DIMM (Dual In-line Memory Module): Unbuffered Type
Dynamic RAM Module
■144-pin Virtual Channel SDRAM SO DIMM (Small Outline Dual In-line Memory Module)
■184-pin Direct RambusTM RIMMTM
Note This module is the Direct Rambus RIMM continuity module which is designed to be inserted into any unused RIMM sockets
in Direct Rambus systems. It continues the Rambus channel through unused RIMM connectors to terminate signals properly
on motherboard, and has no active components mounted on it.
Density
(bytes) Organization
(words × bits) Part number Remark
Class Mounted
devices
Clock
frequency
1/t
CYCLE
(MHz)
Access
time
t
RAC
(ns)
Interface
level
Bank
organization
Supply
voltage
(V)
128M
64M
—
64M × 18
32M × 18
—
16 × 16
16 × 8
—
µ
µ
MC-4R128BKD8J
MC-4R64BKD8J
MC-4RCNTYK
840
845
653
840
845
653
—
400
300
400
300
—
2.5±0.13
—
40
45
53
40
45
53
—
RSL
—
With heat
spreader
With heat
spreader
Note
PD488385FB
×16 pcs.
PD488385FB
×8 pcs.
—
Density
(bytes)
Organization
(words
× bits) Part number Remark
Speed
grade Read
latency Mounted
devices
Prefetch
read
latency
Clock
frequency
(MHz)
Inter-
face
level
Package
height
(mm/inch)
Bank
organi-
zation
Supply
voltage
(V)
Refresh
cycle
(cycles
/ms)
128M
64M
16M×64
8M×64
2
1
A75
A10
A15
A75
A10
A15
µ
µ
MC-45V16AD641
MC-45V8AB641
2
1
2
1
4 3.3±0.3 4K/64133
100
66
133
100
66
LVTTL
34.93/1.375
PD4565821G5
×16 pcs.
PD4565821G5
×8 pcs.
Density
(bytes)
Organization
(words
× bits) Part number Remark
Speed
grade Read
latency Mounted
devices
Prefetch
read
latency
Clock
frequency
(MHz)
Inter-
face
level
Package
height
(mm/inch)
Bank
organi-
zation
Supply
voltage
(V)
Refresh
cycle
(cycles
/ms)
64M★8M×64 1
2
A75
A10
A15
A75
A10
A15
µ
µ
MC-45V8AB641KS
MC-45V8AD641KS
2
1
2
1
4 3.3±0.3 4K/64133
100
66
133
100
66
LVTTL
31.75/1.25
PD4565821G5
×8 pcs.
PD4565161G5
×8 pcs.
★: Under development
IC Memory
146 Selection Guide X10679EJHV0SG00
■Low Power SRAM (Temperature range TA = 0 to 70°C)
Static RAM
Density
(bits)
Organization
(words
× bits) Part number Package
Supply
voltage
(V) Version Class Standby
( A)
Access time
MAX. (ns) Active
(mA)
Data
retention
( A)
1M 128K × 8 4.5 to 5.5
3.0 to 5.5
2.7 to 5.5
µ
µ
µ
PD431000A L
LL
A
B
70
85
70
85
10
12
10
12
15
70
85
70
85
100
70 (V
CC
=4.5 to 5.5)
120
70 (V
CC
=4.5 to 5.5)
100
70 (V
CC
=4.5 to 5.5)
120
70 (V
CC
=4.5 to 5.5)
150
70 (V
CC
=4.5 to 5.5)
70
70
70
35
70
35
70
30
70
30
70
30
70
100
20
20
13
20
13
20
11
20
11
20
11
20
Maximum supply current
50
10
10
10
10
GW: 32-pin SOP (525 mil)
GW: 32-pin SOP (525 mil)
GU: 32-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
GZ: 32-pin TSOP(I) (8 × 20 mm)
(Normal bent) (Reverse bent)
GW: 32-pin SOP (525 mil)
GW: 32-pin SOP (525 mil)
GU: 32-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
GZ: 32-pin TSOP(I) (8 × 20 mm)
(Normal bent) (Reverse bent)
256K 32K × 8 4.5 to 5.5
4.5 to 5.5
3.0 to 5.5
2.7 to 5.5
µ
µ
PD43257B
PD43256B
L
LL
L
LL
A
B
70
85
70
85
70
85
70
85
85
10
12
10
12
15
70
85
70
85
70
85
70
85
85
100
85 (V
CC
=4.5 to 5.5)
120
85 (V
CC
=4.5 to 5.5)
100
85 (V
CC
=4.5 to 5.5)
120
85 (V
CC
=4.5 to 5.5)
150
85 (V
CC
=4.5 to 5.5)
45
45
45
45
45
20
45
20
45
20
45
50
15
50
15
15
10
15
10
15
10
15
20
7
20
7
7
7
GU: 28-pin SOP (450 mil)
GU: 28-pin SOP (450 mil)
GU: 28-pin SOP (450 mil)
GW: 28-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
IC Memory
Selection Guide X10679EJHV0SG00 147
■Low Power SRAM (Extended Temperature TA = –25 to +85°C)
Static RAM
Density
(bits)
Organization
(words
× bits) Part number Package
Supply
voltage
(V) Version Class Standby
( A)
Access time
MAX. (ns) Active
(mA)
Data
retention
( A)
4M 512K × 8
256K × 16
2.7 to 3.6
2.2 to 3.6
1.8 to 3.6
2.7 to 3.6
2.2 to 3.6
1.8 to 3.6
µ
µ
µ
µ
PD444010L-X
PD444012L-X
B
C
D
B
C
D
70
85
10
12
12
15
70
85
10
12
12
15
70
85
100
120
120
150
70
85
100
120
120
150
40
40
7
7
Maximum supply current
7
7
GY: 48-pin TSOP(I) (12 × 18 mm)
(Normal bent) (Reverse bent)
GY: 48-pin TSOP(I) (12 × 18 mm)
(Normal bent) (Reverse bent)
2M 256K × 8 2.7 to 3.6
2.2 to 3.6
1.8 to 3.6
µ
PD442000L-X B
C
D
85
10
10
12
15
15
18
85
100
100
120
150
150
180
35
30
25
22
1M 128K × 8 2.7 to 3.6
2.2 to 3.6
1.8 to 3.6
4.5 to 5.5
3.0 to 5.5
2.7 to 5.5
µ
µ
PD441000L-X
PD431000A-X
B
C
D
—
A
B
70
85
10
10
12
12
15
70
85
10
10
12
10
12
15
70
85
100
100
120
120
150
70
85
100
100
70 (VCC=4.5 to 5.5)
120
70 (VCC=4.5 to 5.5)
100
70 (VCC=4.5 to 5.5)
120
70 (VCC=4.5 to 5.5)
150
70 (VCC=4.5 to 5.5)
25
70
35
70
35
70
30
70
30
70
30
70
2
50
26
50
26
50
22
50
22
50
22
50
2
20
GU: 32-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
GZ: 32-pin TSOP(I) (8 × 20 mm)
(Normal bent) (Reverse bent)
F1: 36-pin FPBGA (6 × 6 mm)
GU: 32-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
GZ: 32-pin TSOP(I) (8 × 20 mm)
(Normal bent) (Reverse bent)
256K 32K × 8 4.5 to 5.5
3.0 to 5.5
2.7 to 5.5
µ
PD43256B-X —
A
B
70
85
10
85
10
12
10
12
15
70
85
100
85
100
120
100 (VCC=4.5 to 5.5)
100
120
100 (VCC=4.5 to 5.5)
150
100 (VCC=4.5 to 5.5)
45
40
45
40
25
25
40
25
40
50
50
25
25
50
25
50
20
GW: 28-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
GU: 32-pin TSOP(I) (8 × 13.4 mm)
(Normal bent) (Reverse bent)
GZ: 32-pin TSOP(I) (8 × 20 mm)
(Normal bent) (Reverse bent)
F1: 36-pin FPBGA (10.5 × 6.5 mm)
IC Memory
148 Selection Guide X10679EJHV0SG00
■CMOS Fast SRAM
Static RAM
Density
(bits)
Organization
(words
× bits) Part number Package Remark
Supply
voltage
(V)
Class Standby
(mA)
Access
time
MAX.
(ns)
Active
(mA)
4M 4M × 1
1M × 4
5.0±0.5
3.3±0.3
5.0±0.5
3.3±0.3
µ
µ
µ
µ
PD434001A
PD434001AL
PD434004A
PD434004AL
15
17
20
A15
A17
A20
15
17
20
A15
A17
A20
15
17
20
15
17
20
15
17
20
15
17
20
140
130
120
130
120
110
140
130
120
130
120
110
10
5
10
5
Maximum supply current
LE: 32-pin SOJ (400 mil)
LE: 32-pin SOJ (400 mil)
G5: 32-pin TSOP (II) (400 mil)
LE: 32-pin SOJ (400 mil)
LE: 32-pin SOJ (400 mil)
512K × 8
256K × 16
5.0±0.5
3.3±0.3
5.0±0.5
3.3±0.3
µ
µ
µ
µ
PD434008A
PD434008AL
PD434016A
PD434016AL
12
15
17
20
A15
A17
A20
12
15
17
20
A15
A17
A20
12
15
17
20
15
17
20
12
15
17
20
15
17
20
200
170
160
150
150
140
130
230
200
190
180
190
180
170
10
5
10
5
LE: 36-pin SOJ (400 mil)
LE: 36-pin SOJ (400 mil)
LE: 44-pin SOJ (400 mil)
G5: 44-pin TSOP (II) (400 mil)
LE: 44-pin SOJ (400 mil)
G5: 44-pin TSOP (II) (400 mil)
IC Memory
Selection Guide X10679EJHV0SG00 149
■CMOS Synchronous Fast SRAM
Static RAM
Density
(bits)
Organization
(words
× bits) Part number Package Remark
Chip I/O
Class Standby
(mA)
Clock
frequency
(MHz)
Clock
access
time
MAX.(ns)
Active
(mA)
Power
down
(mA)
2M 64K × 36
64K × 32
3.3±0.2
3.3±0.2
3.3+0.3/-0.2
µ
µ
µ
PD432836AL
PD432836L
PD432232L
A36
A37
A40
A44
A50
A55
A57
A60
A40
A44
A50
A55
A57
A60
A5
A7
A8
275
267
250
225
200
183
175
167
250
225
200
183
175
167
100
83
66
3.53
3.65
3.9
4.34
4.9
5.3
5.3
5.3
3.9
4.34
4.9
5.3
5.3
5.3
5.0
7.0
8.0
350
350
350
350
350
335
325
290
350
350
350
335
325
290
180
3.5
3.5
2
2.0
2.0
3.0 or 2.5
Maximum supply current Supply voltage (V)
—
3.5
2
GF: 100-pin LQFP Pipeline
operation
1M 32K × 32
32K × 36
3.3+0.3/-0.2
3.3±0.165
3.3±0.165
3.3±0.165
3.3±0.165
µ
µ
µ
µ
µ
PD431231L
PD431632L
PD431532L
PD431636L
PD431536L
A7
A8
A6
A7
A8
A9
A10
A12
A6
A7
A8
A9
A10
A12
83
66
150
133
100
100
83
66
150
133
100
100
83
66
7.0
8.0
4.6
5.0
8.5
9.0
10.0
12.0
4.6
5.0
8.5
9.0
10.0
12.0
130
220
200
200
220
200
200
5
20
5
20
5
2.5
3.3 or 2.5
3.3 or 2.5
3.3 or 2.5
3.3 or 2.5
1
20
5
20
5
GF: 100-pin LQFP Pipeline
operation
Pipeline
operation
Flow Through
operation
Pipeline
operation
Flow Through
operation
IC Memory
150 Selection Guide X10679EJHV0SG00
■Bi-CMOS Synchronous Fast SRAM
Static RAM
Density
(bits)
Organization
(words
× bits) Part number Package RemarkClass Standby
(mA)
Clock
frequency
(MHz)
Supply
voltage
(V)
Interface
level
Clock
access
time
MAX.(ns)
Active
(mA)
4M 256K × 18
128K × 36
3.3±0.15
3.3±0.15
3.3±0.15
3.3±0.15
3.3±0.15
3.3±0.15
3.3±0.15
3.3±0.15
µ
µ
µ
µ
µ
µ
µ
µ
PD464318AL
PD464318L
PD464518AL
PD464518L
PD464336AL
PD464336L
PD464536AL
PD464536L
A4
A44
A5
A5
A6
A65
A55
A6
A7
A8
A4
A44
A5
A5
A6
A65
A55
A6
A7
A8
250
225
200
200
167
154
182
166
143
125
250
225
200
200
167
154
182
166
143
125
2.0
2.3
2.5
2.6
3.0
3.5
5.5
6.0
7.0
8.0
2.0
2.3
2.5
2.6
3.0
3.5
5.5
6.0
7.0
8.0
550
600
400
450
750
700
650
550
55
—
45
150
55
—
45
150
HSTL
HSTL
LVTTL
LVTTL
HSTL
HSTL
LVTTL
LVTTL
Maximum supply current
S1: 119-pin BGA Single clock
RR mode
Single clock
RR mode
Single clock
RL mode
Single clock
RL mode
Single clock
RR mode
Single clock
RR mode
Single clock
RL mode
Single clock
RL mode
IC Memory
Selection Guide X10679EJHV0SG00 151
■Mask ROM
Mask ROM
■Synchronous Mask ROM
Density
(bits) Organization
(words × bits) Part number Package
Page
access
Supply
voltage
(V)
Normal Active
(mA)
128M
64M
16M × 8 or 8M × 16
4M × 16
8M × 8 or 4M × 16
3.3±0.3
3.0±0.3
3.3±0.3
3.0±0.3
5.0±0.5
3.3±0.3
3.0±0.3
3.3±0.3
3.0±0.3
µ
µ
µ
µ
µ
µ
PD23C128000L
PD23C128040L
PD23C64020
PD23C64000AL
PD23C64040AL
120
140
120
140
120
90
100
90
100
—
TBD
—
—
—
25
30
TBD
TBD
—
30
30
30
30
Maximum supply currentAccess time MAX. (ns)
TBD
TBD
70
45
40
60
55
Standby
( A)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
CZ: 42-pin DIP (600 mil)
GX: 44-pin SOP (600 mil)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
GX: 44-pin SOP (600 mil)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
32M
24M
4M × 8 or 2M × 16
2M × 16
4M × 8 or 2M × 16
2M × 16 or 1M × 32
3M × 8 or 1.5M × 16
1.5M × 16
5.0±0.5
5.0±0.5
3.3±0.3
3.0±0.3
3.3±0.3
3.3±0.3
5.0±0.5
5.0±0.5
µ
µµ
µ
µµµ
PD23C32000A
PD23C32020A
PD23C32000L
PD23C32040L
PD23C32082L
PD23C24000
PD23C24020
120
120
120
140
140
100
120
120
—
—
—
40
30
—
—
100
100
30
30
30
30
100
100
70
70
40
35
60
80
70
70
GX: 44-pin SOP (600 mil)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
G5: 44-pin TSOP (II) (400 mil)
CZ: 42-pin DIP (600 mil)
GX: 44-pin SOP (600 mil)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
G5: 44-pin TSOP (II) (400 mil)
GX: 44-pin SOP (600 mil)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
G5: 44-pin TSOP (II) (400 mil)
G7: 70-pin SSOP (500 mil)
GX: 44-pin SOP (600 mil)
CZ: 42-pin DIP (600 mil)
GY: 48-pin TSOP (I) (12
×
18 mm)
(Normal bent) (Reverse bent)
G5: 44-pin TSOP (II) (400 mil)
16M 2M × 8 or 1M × 16 3.3±0.3
3.0±0.3
3.3±0.3
3.0±0.3
µ
µ
PD23C16000AL
PD23C16040AL
85
100
85
100
—
30
40
30
30
45
40
60
55
Density
(bits)
Interface
level
Organization
(words × bits) Part number Package Remark
Supply
voltage
(V)
Clock
fre-
quency
(MHz)
32M 2M × 16 or 1M × 32 3.3±0.3
/RAS
latency
MIN.
2
1
1
/CAS
latency
MIN.
5
4
3
µ
PD23C32202L 66
50
33
150
G5: 86-pin TSOP (II) (400 mil)
Maximum
supply
current
active
(mA)
10
15
25
Clock
access
time
MAX.
(ns) LVTTL
IC Memory
152 Selection Guide X10679EJHV0SG00
■COMBO Memory
COMBO Memory
Flash Memory
■Flash Memory
Density (bits)
Organization
(words × bits)
Part number Function Package
1M (128K × 8)
+
2M (256K × 8)
1M (128K × 8)
+
2M (256K × 8)
Supply
voltage
(V)
1.8 to 2.2
2.2 to 2.7
2.7 to 3.3
1.8 to 2.2
2.2 to 2.7
2.7 to 3.3
SRAM
+
ROM
SRAM
+
ROM
Access
time
MAX. (ns)
Maximum supply current
500
375
250
500
375
250
Active
(mA)
3.5
5.5
7.5
4.0
6.0
10.0
Standby
( A)
6.5
8.0
10.0
6.5
8.0
10.0
µ
µ
µµ
PD26401
PD26411
Data
Retention
( A)
10
10
GU: 32-pin TSOP (I) (8
×
13.4 mm)
(Normal bent) (Reverse bent)
GZ: 32-pin TSOP (I) (8
×
20 mm)
(Normal bent) (Reverse bent)
Density
(bits) Organization
(words × bits) Part number Package
Boot code
Sector
architecture
Access
time
MAX. (ns) Active
(mA)
8M 1M × 8
1M × 8
or
512K × 16
top or bottom
top or bottom
Supply
voltage
(V)
2.7 to 3.6
2.2 to 2.7
2.7 to 3.6
2.2 to 2.7
µ
µ
µ
PD29F008AL-X★
PD29F800AL-X★
90
100
120
150
90
100
120
150
5
5
5
5
Maximum supply current
12
12
12
12
Standby
( A)
★: Under development
GZ: 40-pin TSOP (I) (10
×
20 mm)
(Normal bent) (Reverse bent)
GZ: 48-pin TSOP (I) (12
×
20 mm)
(Normal bent) (Reverse bent)
IC Memory
Selection Guide X10679EJHV0SG00 153
MCP (Flash Memory + SRAM)
■MCP (Flash Memory and SRAM)
Density
(bits)
Organi-
zation
(words
× bits)
Part number Package Remark
Read/Write
cycle time
MIN. (ns)
Supply
voltage
(V)
80K
40K
10096 × 8
5048 × 16
5048 × 8
µ
µ
PD485506
PD485505
25/25
35/35
25/25
35/35
5.0±0.5 • 44-pin TSOP II
• 24-pin SOP
Data hold
period
(ms)
—
—
Maximum
supply
current active
(mA)
140
80
FAX, PPC Line buffer
FIFO structure
Other
■Line Buffer
Density (bits)
Organization
(words × bits)
Part
number Supply
Voltage (V)
Function Package
16M (2M × 8)
2M (256K × 8)
16M (2M × 8)
2M (256K × 8)
16M (1M × 16)
2M (256K × 8)
16M (1M × 16)
2M (256K × 8)
16M (2M × 8)
1M (128K × 8)
16M (2M × 8)
1M (128K × 8)
16M (1M × 16)
1M (128K × 8)
16M (1M × 16)
1M (128K × 8)
Boot code
Sector
architecture
Top
—
Bottom
—
Top
—
Bottom
—
Top
—
Bottom
—
Top
—
Bottom
—
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Access
time
MAX.
(ns)
Maximum supply current
100
Active
(mA)
35
Standby
( A)
5
2
5
2
5
2
5
2
5
26
5
26
5
26
5
26
µµ
MC-22100
MC-22101
MC-22102
MC-22103
MC-22104
MC-22105
MC-22106
MC-22107
F1-DE: 48-pin BGA
Data
Retention
( A)
—
2
—
2
—
2
—
2
—
20
—
20
—
20
—
20
2.7 to 3.6
8M (1M × 8)
2M (256K × 8)
8M (1M × 8)
2M (256K × 8)
8M (1M × 8 or 512K × 16)
2M (256K × 8)
8M (1M × 8 or 512K × 16)
2M (256K × 8)
8M (1M × 8)
1M (128K × 8)
8M (1M × 8)
1M (128K × 8)
8M (1M × 8 or 512K × 16)
1M (128K × 8)
8M (1M × 8 or 512K × 16)
1M (128K × 8)
Top
—
Bottom
—
Top
—
Bottom
—
Top
—
Bottom
—
Top
—
Bottom
—
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
Flash Memory
SRAM
5
2
5
2
5
2
5
2
5
26
5
26
5
26
5
26
MC-22000
MC-22001
MC-22002
MC-22003
MC-22004
MC-22005
MC-22006
MC-22007
F1-DB: 48-pin BGA
—
2
—
2
—
2
—
2
—
20
—
20
—
20
—
20
(10
×
14 mm)
(10
×
11 mm)
154 Selection Guide X10679EJHV0SG00
[MEMO]
Selection Guide X10679EJHV0SG00 155
Semi-Custom IC
NEC’s ASICs.................................................................... 156
0.25
µ
m ASIC................................................................... 166
Gate Array ....................................................................... 172
• CMOS Gate Array ...................................................... 176
• BiCMOS Gate Array .................................................. 195
Cell-Based IC .................................................................. 200
Embedded Array............................................................. 217
Analog Master................................................................. 220
Mixed Signal ASIC.......................................................... 223
3
156 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Remark ASCP .............Application Specific Custom Product
ASSP .............Application Specific Standard Product
FPGA .............Field Programmable Gate Array
PLD ............... Programmable Logic Device
PROM ............Programmable Read Only Memory
USIC ..............User Specific IC
UPIC ..............User Programmable IC
ASICs are broadly classified into LSIs for single users (ASCPs, USICs, and UPICs) and those for
multiple users, as shown above.
NEC’s ASICs
What Is ASICs ? (1/2)
LSIs are broadly classified into two types: general-purpose LSIs and Application-Specific ICs (ASICs).
The general-purpose LSIs are designed and supplied as standard products by the manufacturers.
Because these LSIs are mass-produced, generally they are inexpensive and do not require much work or
expense for development from the user even if each user uses only a small quantity of these LSIs.
However, because they are general-purpose products, some of their functions may be redundant for
some users, and some functions may not be available. Moreover, the user's own unique functions
cannot be provided.
In contrast, ASICs are for specific applications and can be further classified as illustrated below.
LSI
ASIC
ASCP/USIC
Classification of ASICs
Gate array
Embedded array
Analog master
Single-chip microcontroller
Cell-based IC
For single user
Full-custom LSI
Image processing LSI
etc.
etc.
etc.
Audio LSI
Automobile LSI
Communications LSI
Semi-custom LSI
For multiple users
UPIC
ASSP
General-purpose LSI
FPGA
PLD
PROM
Mixed signal ASIC
Selection Guide X10679EJHV0SG00 157
Semi-Custom IC
NEC’s ASICs
What Is ASICs ? (2/2)
ASIC for single users (ASCP/USIC)
ASICs of this type are designed for a specific user and are used for security and to improve
performance (such as increasing speed and lowering power consumption). On the other hand, the
load on the user for development is heavy. These ASICs are classified into full custom LSIs and
semi-custom LSIs.
Full-custom LSIs are developed by the users who have mastered LSI production technologies, and
require a long development time and incur large costs. A contract for production with the manufac-
turer is made on the assumption of mass production of the application system. Usually, the LSIs
developed in this way offer extremely high performance.
The word semi-custom LSI is used to differenciate from full-custom LSIs. With full-custom LSIs, all
the development processes, from circuit design to photo mask, are tailored to that particular design.
In contrast, the elements on the chip of a semi-custom LSI are designed and produced in advance by
the manufacturer, and the user builds his own unique functions using these elements. Take gate
arrays for example. A common photo mask is used for the diffusion process and only the photo mask
for the wiring process is created according to the specifications of the user. This means an LSI can
be developed in a shorter time.
ASIC for single user (UPIC)
FPGA, PLD, and PROM are collectively called UPIC. These are ASICs that can be developed by
the user by using dedicated development tools for production runs as small as a single sample.
In particular, because the logical operations of FPGA and PLD are the same as those of gate
arrays, these UPICs are highly useful as sample LSIs to evaluate the breadboard and circuit opera-
tions before the development of gate arrays. Compared with gate array products, the development
cost of UPICs can be kept very low, and the development period is short. For these reasons, UPICs
are also used to check parts of large-scale LSIs.
ASIC for multiple users (ASSP)
ASSPs are standard LSIs produced by the manufacturer for specific fields. Because they are
designed and produced by the manufacturer, the user does not have to shoulder any development
burden and there is no limit to the production quantity. These LSIs include graphics display control-
lers and field memories.
158 Selection Guide X10679EJHV0SG00
Semi-Custom IC
NEC’s ASICs
Selecting an LSI
Users' products increasingly require the following features:
High added value
Implementation in software
Total solutions
System integration, etc.
Integrating the circuits formerly implemented with conventional ICs using an ASIC is the best way to
achieve these things. Consequently, it is important to select an ASIC manufacturer who can provide you
with powerful device technology, system technology, and upstream software support.
NEC offers a variety of ASIC products that can satisfy every user's needs, as well as comprehensive
support. The key to selecting the most suitable ASIC product is completely understanding the character-
istics required by the entire system to be developed and the circuits to be integrated into an ASIC.
These characteristics include the following conditions:
• Development investment
• Development period (delivery period)
• Quantity of production
• Necessary functions and performance
• Application
If you use the list of criteria on the next page, taking these points into consideration, you can find the
ASIC you really need.
Selection Guide X10679EJHV0SG00 159
Semi-Custom IC
NEC’s ASICs
Criteria for Selection (1/4)
Whether a full-custom or semi-custom LSI should be used, or whether ASSP or general-purpose LSI
should be used depend on your concept, development plan, and the characteristics you require. By
considering the items in the following diagram you can select the products that satisfy all your require-
ments. The subsequent sections 1 through 4 compare the major semi-custom products and full-custom
products for your reference.
Criteria for selection
User
System
Full-custom LSI
Semi-custom LSI
Gate array
Cell-based IC
Embedded array
Analog master
Mixed signal ASIC
Concept
Characte-
ristics
Develop-
ment plan
• Purpose of IC
• Application
• Operating conditions
and environment
• Package
• Targeted price
•
Quantity of samples and
delivery period
•
Desired development cost
• Quantity and period
of mass production
• Life cycle
• Circuit I/O conditions
• Circuit diagram
• Circuit characteristics
and constants
• Reliability test
• Pin arrangement
160 Selection Guide X10679EJHV0SG00
Semi-Custom IC
NEC’s ASICs
Criteria for Selection (2/4)
Development Period and Relative Performance
As shown in the figure on the right, full-
custom LSIs have high performance but
require a long development period. In con-
trast, the development period of semi-custom
LSIs, such as gate arrays and analog masters,
is shorter, although these LSIs have some
redundant functions.
For embedded arrays, the wafer is pro-
duced when the macros to be used have been
determined. In the meantime, the circuits are
determined through simulation. After simula-
tion has been completed, only the wiring
process is left, and development can be
completed in almost the same period as gate
arrays. If the macros and gate scale of the
wafer are the same as those of gate arrays,
the wafer can be used as a master wafer;
consequently, the development period is
equivalent to that of gate arrays.
Cell-based ICs, and new semi-custom LSIs
fall somewhere between full-custom LSIs and
gate arrays. Although these LSIs offer
performance and functions comparable to
those of full-custom LSIs, their development
period is only slightly longer than that of gate
arrays.
2 3 4 5 6 7 8910 20 30 40 50
Development period (No. of week after determination of specifications)
* Performance relative to full-custom
Relative functions and performance High
Analog master *
Cell-based IC
Full-custom
Embedded array
Mixed signal ASIC
Gate array
Selection Guide X10679EJHV0SG00 161
Semi-Custom IC
NEC’s ASICs
Criteria for Selection (3/4)
Development Investment and Element Cost
As shown in the figure on the right, there is
an clear relationship between the development
investment and unit cost.
PLD (Programmable Logic Device) and
FPGA (Field Programmable Gate Array) are
types of general-purpose LSIs with a design
philosophy close to that of gate arrays. You
can purchase one unit of these LSIs, and can
program and use the LSI on the day you
purchase it. Therefore, the development
investment is extremely low. However, the
price per element of PLDs and FPGAs is high.
Conversely, although the development
period and cost of a full-custom LSI are
higher, the unit price of each element is very
low, partly because almost 100% of the
elements are used and partly because the full-
custom LSI is usually mass-produced.
The various semi-custom LSI products fall
between these two. Therefore, semi-custom
LSIs are ideal if the development period and
cost are limited and at the same time, the unit
price of the element must be kept low.
In addition, because many development
tools and standard cell libraries are available
for semi-custom LSIs , the development period
can be further shortened.
Development investment (period, cost) High
Unit price per element High
Analog master
Cell-based IC
Full-custom
Gate array
Embedded
array
PLD/
FPGA
Mixed signal ASIC
162 Selection Guide X10679EJHV0SG00
Semi-Custom IC
NEC’s ASICs
Criteria for Selection (4/4)
Total Production and Gate Units (Guideline)
One of the indexes that indicate the price of
an LSI is a gate unit price. The gate unit price
of PLD and general-purpose LSIs is low if the
production is small. However, the unit price
does not decrease even if the volume of
production increases.
Full-custom LSIs are not profitable unless
they are produced in a large quantity.
Semi-custom LSIs can be profitable whether
they are produced in a small or large quantity.
Of these semi-custom LSIs, gate arrays are
more suitable for small-scale production than
cell-based ICs.
Production Large
Gate unit price High
Cell-based IC Full-custom
Gate array
Gate array
PLD, general-purpose IC,
FPGA
Cell-based IC Full-custom
●Suitability for Different Types of Circuit
Circuits can be broadly classified into
analog circuits and digital circuits.
As shown in the figure on the right, among
the semi-custom LSIs gate arrays are suitable
for digital circuits, and analog masters can be
used to integrate analog circuits. Cell-based
ICs are mainly used for digital circuits, but can
also be used to combine analog and digital
circuits.
A complicated circuit with a special configu-
ration that cannot be realized using semi-
custom LSI must be created as a full-custom
LSI. A full-custom LSI can be used to inte-
grate both analog circuits and digital circuits.
Digital
Analog
Gate array
Embedded array
Cell-based IC
Analog master
Semi-custom LSI
Mixed signal ASIC
Full-custom LSI
Selection Guide X10679EJHV0SG00 163
Semi-Custom IC
NEC’s ASICs
History of Development of ASIC
NEC developed device technology and basic software for its ASICs in the 1970’s, and started sales of
its ASICs from 1981.
Semi-custom LSIs were first developed in response to demands to improve the performance of
systems such as computers and private branch exchanges. When the advantages of ASICs became
more widely recognized as device development and tool organization advanced in the 1980’s, the use of
ASICs increasingly became widespread.
Today, users who have experience of development using gate arrays wish to develop using ASICs to
acheive a larger scale and higher performance. Consequently, device manufacturers are required to
supply state-of-the-art semiconductor chips and efficient design environments.
To satisfy these requirements, NEC supplies a wide range of services including an extensive line-up
of processes and technologies, and integrated CAD systems using original EWS and networking.
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 97
C&C VAN
VISTASLII VISTASLIII
CB-C10
96 98
(Year)
Note Application Specific Arrays
Remark : Maintenance parts
TTL
ECL
BiCMOS
CMOS
ASA
NOTE
Standard cell
Custom micro
Cell-based IC
Embedded array
Analog master
Mixed signal ASIC
Design environment
Gate array
TTL-2 TTL-3 TTL-2A
ECL-2 ECL-3 ECL-3A ECL-4 ECL-3B ECL-4A ECL-4R
BiCMOS-4 BiCMOS-4A BiCMOS-5 BiCMOS-8 QB-8
CMOS-2 CMOS-3 CMOS-4 CMOS-5
SC-4 SC-5
CMOS-6
CMICRO-4 CMICRO-5
CMOS-7
OPENCAD
TM
CB-C7
CMOS-8/
8L/8LCX CMOS-9 CMOS-
8LHD CMOS-
9HD CMOS-
N5
CHS V-CHS M-CHS CHS-A
OPENCAD V4 OPENCAD V5
BiCMOS
CMOS-
8LH
CB-C8
VX/VM CB-C9
VX/VM
CB-C9
EA-C9 EA-9HD
EA-C10
MA-8 MA-9
CB-C8
VISTASL
TM
Universal PCI
series MV
series
Sales start
164 Selection Guide X10679EJHV0SG00
Semi-Custom IC
NEC’s ASICs
NEC's ASIC Products (1/2)
Gate array
Gate arrays are semi-custom LSIs. Gates are laid out on master
wafers in the form of an array. These gates are wired together to
create the desired LSI.
To lay out gates, an area where no gates are placed may be
provided on the wafer (channel structure) or gates may be laid out
over the entire surface of the wafer (channel-less structure).
The channel gate arrays have fixed wiring areas and gate areas.
Almost all the gates of these gate arrays can be used. However, it is
difficult to integrate memories on these gate arrays.
The channel-less gate arrays can be used to integrate a large-scale
system on a single chip. They allow you to determine the width of the
wiring area and the shape of the gates freely and to integrate memo-
ries efficiently.
Cell-based IC
Cell-based ICs are high-performance semi-custom LSIs for integrat-
ing memories such as RAM and ROM, CPU, CPU peripherals, and
analog circuits, as well as logic, on a single chip, by means of a
building block type standard cell design technique.
Cell-based ICs cannot only realize a density higher than gate arrays
and embedded arrays, but also integrate high-performance macros.
Therefore, they have increasingly grown in popularity recently as semi-
custom LSIs for achieving systems-on-chip.
Unlike gate arrays, no master wafers are available for cell-based
ICs, and a cell-based IC is processed from the very first process, i.e.,
the diffusion process, to satisfy the user's particular requirements.
Selection Guide X10679EJHV0SG00 165
Semi-Custom IC
NEC’s ASICs
NEC's ASIC Products (2/2)
Embedded array
Embedded arrays are high-performance semi-custom LSIs that use
the basic cells of a gate array in the internal area, and that can be
used to integrate memories like cell-based ICs, such as RAM and
ROM.
LSIs with sophisticated functions and high performance comparable
to those of cell-based ICs can be created.
Because the wafer is produced in parallel with simulation, only the
wiring process must be done after simulation has been completed.
Consequently, the development period up to completion of a sample is
as short as that of gate arrays.
If a cell-based IC is used for initial production, the production of the
system can be started in a short time.
If the macro configuration and gate scale are the same, the same
master wafer can be used to develop other LSIs. Therefore, many
variations of LSIs can be created at a lower cost than cell-based ICs.
In addition, the circuits of embedded arrays can be easily modified,
so that the risk involved in development can be lowered.
Analog master
An analog master is used to create an analog LSI by using a master
wafer on which transistors, resistors, and capacitors are laid out in
advance, and desiging the appropriate wiring in a similar way to when
a gate array is used.
If you think it would be too difficult to create a full-custom analog
circuit from the viewpoint of development period, cost, and the quantity
of ICs used, the analog master is the ideal product.
Mixed signal ASIC
This is a semi-custom LSI that integrates the functions of a CMOS
gate array and an analog semi-custom IC on a single chip.
The gate array block consists of the basic cells of a CMOS gate
array, and can be designed in the same manner as a gate array.
The analog delay block incorporates CMOS transistors and bipolar
transistors for analog circuits, so that high-performance analog circuits
can be constructed.
166 Selection Guide X10679EJHV0SG00
Semi-Custom IC
0.25
µ
m
ASIC
EA-C10 Family
Features (1/3)
High-density, super high-speed, and low-power consumption embedded array using the most advanced
0.25
µ
m technology
• High-level function and high-performance LSI compatible to cell-based IC
• 2.5 V/3.3 V interface
• Short turn around time equivalent to gate array
• High-density of system-on-a-chip level
• Easy development and modification of derivative models
• Macro maintenance common to cell-based IC (CB-C10) (including analog circuit)
Family Name
Maximum density (total number of gates)
Supply voltage
Delay time Internal gate
Note 1
Input buffer
Note 2
Output buffer
Note 3
Power consumption
7 million gates
0.14 W/MHz/cell (internal gates)
2.5 V ± 0.2 V
59 ps
79 ps
1363 ps
EA-C10
Notes 1.
2.
3.
2-input NAND power gate, fanout: 1, wiring length: 0.5 mm
Fanout: 2, wiring length: 0 mm
Load capacitance: 50 pF, I
OL
= 12 mA
µ
Selection Guide X10679EJHV0SG00 167
Semi-Custom IC
0.25
µ
m
ASIC
EA-C10 Family
Features (2/3)
Wide variety of macro libraries (1/2)
Logic gate
Delay gate
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Functional cell Compiled macro (cell-based IC type)
High-speed 1-port RAM
High-speed 2-port RAM
Super high-speed 1-port RAM
High-density 1-port RAM
High-density 2-port RAM
High-speed ROM
Mega macro to be developed
Macro name Consumer
Portable equipment
Communication
Graphic
PC
PCI controller
USB
IEEE1394
V8×× CPU
VR4××× CPU
V30MZTM
MPEG2 (decoder)
A/D, D/A
Modem CODEC
DSP (SPRX, OAK/Pine)
ARM CPU
ATM (25MHz, 155MHz)
Ethernet 10/100 Base PHY, MAC
RAC (RambusTM ASIC Core cell)
2D, 3D accelerator
The release schedule differs depending on the macro. For details, consult NEC.
Including macro libraries under development and under study
Remarks 1.
2.
168 Selection Guide X10679EJHV0SG00
Semi-Custom IC
0.25
µ
m
ASIC
EA-C10 Family
Features (3/3)
Wide variety of macro libraries (2/2)
I/O buffer
LVCMOS/LVTTL
Slew rate buffer
3-state buffer
Open-drain buffer
Others
DPLL (to 250 MHz)
APLL (to 500 MHz)
Multiplier
UART
Register file
DRAM
Flash memory
Scan block
JTAG
High-speed I/O
GTL/GTL+ (Gunning Transceiver Logic)
PCI
Note 1
(Peripheral Component Interconnect)
HSTL (High Speed Transceiver Logic)
pECL (Pseudo Emitter Coupled Logic)
SSTL (Stub Series Terminated Transfer Logic)
LVDS (Low Voltage Differential Signaling)
USB (Universal Serial Bus)
IEEE1394
RAM macro (gate array type)
Note 2
High-speed 1-port RAM
High-speed 2-port RAM
Interface standard proposed by Intel.
RAM macro for gate array. Bit/word fixed.
The release schedule differs depending on the macro. For details, consult NEC.
Including macro libraries under development and under study
Notes 1.
2.
Remarks 1.
2.
Selection Guide X10679EJHV0SG00 169
Semi-Custom IC
Features
0.25
µ
m
ASIC
CB-C10 Family
Features (1/3)
High-density, super high-speed, and low-power consumption cell-based IC using the most
advanced 0.25
µ
m technology
In addition to featuring a high-density of 20 million gates (MAX.) and low-power consumption, high-
speed internal gates, the EA-C10 Family achieves system-on-chip capabilities through a wide variety
of application-oriented macros.
Furthermore, a macro library which operates on low voltage (to 1.8 V) is also being prepared.
Family Name
Maximum density (number of usable gates)
Supply voltage
Delay time Internal gate
Note 1
Input buffer
Note 2
Output buffer
Note 3
Power consumption
20M gates (15M gates)
0.04 W/MHz/gate
2.5 V ± 0.2 V
93.4 ps
31.5 ps
1363 ps
CB-C10
Note 1.
2.
3.
2-input NAND power gate, fanout: 1, wiring length: 0 mm
Fanout: 2, wiring length: 0 mm
Load capacitance: 50 pF, I
OL
= 12 mA
µ
170 Selection Guide X10679EJHV0SG00
Semi-Custom IC
0.25
µ
m
ASIC
CB-C10 Family
Features (2/3)
Wide variety of macro libraries (1/2)
Logic gate
Delay gate
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Functional cell Compiled macro
High-speed 1-port RAM
High-speed 2-port RAM
Super high-speed 1-port RAM
High-density 1-port RAM
High-density 2-port RAM
High-speed ROM
Mega macro to be developed
Macro name Consumer
Portable equipment
Communication
Graphic
PC
PCI controller
USB
IEEE1394
V8×× CPU
V
R
4××× CPU
V30MZ
MPEG2 (decoder)
A/D, D/A
Modem CODEC
DSP (SPRX, OAK/Pine)
ARM CPU
ATM (25MHz, 155MHz)
Ethernet 10/100 Base PHY, MAC
RAC (Rambus
TM
ASIC Core cell)
2D, 3D accelerator
The release schedule differs depending on the macro. For details, consult NEC.
Including macro libraries under development and under study
Remarks 1.
2.
Selection Guide X10679EJHV0SG00 171
Semi-Custom IC
0.25
µ
m
ASIC
CB-C10 Family
Features (3/3)
Wide variety of macro libraries (2/2)
I/O buffer
LVCMOS/LVTTL
Slew rate buffer
3-state buffer
Open-drain buffer
Others
DPLL (to 250 MHz)
APLL (to 500 MHz)
Multiplier
UART
Register file
DRAM
Flash memory
Scan block
JTAG
High-speed I/O
GTL/GTL+ (Gunning Transceiver Logic)
PCI
Note
(Peripheral Component Interconnect)
HSTL (High Speed Transceiver Logic)
pECL (Pseudo Emitter Coupled Logic)
SSTL (Stub Series Terminated Transfer Logic)
LVDS (Low Voltage Differential Signaling)
USB (Universal Serial Bus)
IEEE1394
Interface standard proposed by Intel.
The release schedule differs depending on the macro. For details, consult NEC.
Including macro libraries under development and under study
Note
Remarks 1.
2.
172 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
What Is a Gate Array ?
When producing LSIs, the diffusion process
that forms elements such as transistors on a
silicon wafer takes a long time. With gate
arrays, manufacturers can supply wafers called
master wafers whose diffusion process has
been completed. On a master wafer, logic
gates (basic cells) are arranged in the shape of
a grid (array). These basic cells are not wired
to each other at first, and are electrically
independent. When the required circuit has
been determined, these basic cells are com-
bined to create it. Therefore, because the user
produce product in the short time required for
the processes following the wiring process, very
short development times are possible. In
addition, even a small quantity of products can
be produced at a low cost by individually wiring
master wafers chosen from the many different
types readily available.
As the density of gate arrays has increased,
a type called the channel-less gate array that
can be used to integrate a large-scale system
on a single chip has come into the spotlight.
A channel-less gate array does not have a
wiring area, unlike conventional gate arrays, but
has transistors over its entire surface. The
major features of the channel-less gate array, in
addition to a short development period, are as
follows:
• Memories can be efficiently implemented.
• The width of the wiring area and the shapes
of the gates can be determined as you like.
ASIC ASCP/USIC Full-custom LSI
Semi-custom LSI
ASSP
Image processing LSI
Communications LSI
Automobile LSI
Audio LSI
Gate array
Cell-based IC
Analog master
Chip of gate array Master wafer
(after diffusion)
Silicon wafer
(before diffusion)
Channel structure
Channel-less structure
NEC ASIC
Selection Guide X10679EJHV0SG00 173
Semi-Custom IC
Gate Array
Product Line-Up
NEC offers 89 different gate array models (78 CMOS models, 11 BiCMOS models) with the world's
highest performance and density, backed up by its leading-edge technology. These gate arrays are
employed in a wide range of fields, such as electronic games, household appliances, optical communica-
tions equipment, and super computers.
Product Line-up
CMOS-N5
QB-8
CMOS-6A
CMOS-8L
CMOS-6
CMOS-8
CMOS-6S
0.6 ns
0.5 ns
0.4 ns
0.3 ns
0.2 ns
0.1 ns
1 K 2 K 3 K 5 K 20 K 30 K 50 K10 K 200 K 300 K 500 K100 K 2 M 3 M1 M
Delay time/gate (fanout: 2, wiring length: 2 mm)
Number of gates
CMOS-9HD
Channel-less CMOS : CMOS-N5, CMOS-9HD, CMOS-8, CMOS-8L, CMOS-6, CMOS-6A, CMOS-6S
BiCMOS : QB-8
174 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
Features of NEC Gate Arrays
Wide variety of models
Many different models are available,suitable for all kinds of systems.
CMOS gate arrays : 7 families, 78 models
BiCMOS gate arrays : 1 families, 11 models
High density and high speed thanks to leading edge technology
The CMOS-9HD family employs a 0.35-
µ
m CMOS technology, 3-layer wiring technology, and channel-
less structure. As a result, a density of up to 1.6M gates (1.1M usable gates) and a speed of 107ps
have been achieved, enabling large-scale system integration on a single chip.
Drastic cost reduction
The CMOS-N5 family is a gate array that provides high-speed operation with a 5-V power supply
voltage. Drastic cost reductions have been achieved thanks to higher integration by the adoption of
0.5
µ
m technology (2-layer wiring), and lowering the package assembly cost.
High-level gate arrays from many libraries
Because many library functions are available, its easy to improve the functionality of your system.
Moreover, every technology is standardized to facilitate design.
Macros of large-scale CPU peripheral circuits are available for CMOS gate arrays, shortening the
designing period and improving the functionality of your systems.
Selection Guide X10679EJHV0SG00 175
Semi-Custom IC
Gate Array
Which Gate Arrays Is Best-Suited to Your System ?
Yes
No
High-speed
interface?
QB-8
5V
3.3V High
Supply voltage
CMOS-9HD
CMOS-8L
Low
Density,
operating speed
Low
Middle
High
HighLow
Operating speed
CMOS-8
Start
CMOS-6
CMOS-6A
CMOS-6S
Density
CMOS-N5
176 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Arrays
Product Line-Up
NEC offer many types of CMOS gate arrays including the CMOS-6 family with a design rule of 1.0
µ
m and the CMOS-9HD family with a design rule of 0.35
µ
m.
These CMOS gate arrays have densities from 1.8K gates to 1.6M gates (78 models) and satisfy a
wide range of user needs by providing compound functions with integrated memories and keeping the
operating voltage low.
Density • function
89 90 91 92 93 94 95 96 Year97 98
5-V power supply
3.3-V power supply
CMOS-N5
(0.5 m)
CMOS-8L
(0.5 m)
CMOS-9HD
(0.35 m)
CMOS-6
(1.0 m)
<NEW>
CMOS-8
(0.6 m)
µ
µµ
µ
µ
Selection Guide X10679EJHV0SG00 177
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-6 Family
Available Models
42240 72576 119232 177408
31680 54432 89424 133056
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
236 304 384 464
0.5 ns (fanout: 2, wiring length: 2 mm)
0.4 ns (fanout: 2, wiring length: 2 mm)
1.0 ns (fanout: 2, wiring length: 2 mm)
2.0 ns (C
L
= 15 pF)
I
OL
= 4.5, 9.0, 13.5, 18.0, 24.0 mA
5 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 75 %
Output drive capability
PD65658 PD65664 PD65672 PD65676
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµ
CMOS-6A Family
Available Models
0.5 ns (fanout: 2, wiring length: 2 mm)
0.4 ns (fanout: 2, wiring length: 2 mm)
1.0 ns (fanout: 2, wiring length: 2 mm)
2.0 ns (C
L
= 15 pF)
I
OL
= 4.5, 9.0, 13.5, 18.0, 24.0 mA
5 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 60 %
5376
3225
100
PD65630
8000
4800
116
PD65636
11520
6912
136
PD65640
16240
9744
156
PD65646
21120
12672
176
PD65650
30720
18432
208
PD65654
40480
24288
220
PD65656
70272
42163
288
PD65662
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµµµµµ
178 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-6S Family
Available Models
1836 3484 5312 13416
1101 2090 3187 8049
80 100 120 176
0.5 ns (fanout: 2, wiring length: 2 mm)
0.4 ns (fanout: 2, wiring length: 2 mm)
1.0 ns (fanout: 2, wiring length: 2 mm)
2.0 ns (CL = 15 pF)
IOL = 4.5, 9.0, 13.5, 18.0, 24.0 mA
5 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 60 %
PD65611 PD65621 PD65625 PD65643
Internal gates*
Number of usable gates**
Number of padsNote
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµ
25488
15292
236
PD65653
µ
Selection Guide X10679EJHV0SG00 179
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-6/6A/6S Family
Library
I/O buffer
Function
Input buffer
Output buffer
Bidirectional buffer
Low-noise buffer
Fail-safe buffer
Oscillation circuit
Function block
Function
Logic gate
Buffer
Inverter
3-state buffer
Driver
Delay
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Others
Memory block
Function
High-speed single-port RAM
High-speed dual-port RAM
High-density single-port RAM
Compiled RAM
ROM
Mega macro
Function
DMA controller
Serial interface unit
Parallel interface unit
Timer/counter
Interrupt controller
Absolute Maximum Ratings Recommended Operating Conditions
DC Characteristics
Characteristics
Parameter Symbol Rating Unit
V
DD
V
I
/V
O
I
O
I
O
I
O
I
O
T
A
T
stg
–0.5 to +6.5
–0.5 to V
DD
+ 0.5
40
Note1
30
Note2
20
Note3
10
Note4
–40 to +85
–65 to +150
V
V
mA
mA
mA
mA
˚C
˚C
Supply voltage
Input/output voltage
Output current
Output current
Output current
Output current
Operating temperature
Storage temperature
Notes 1. I
OL
(MIN.) = 18.0 mA type
2. I
OL
(MIN.) = 13.5 mA type
3. I
OL
(MIN.) = 9.0 mA type
4. I
OL
(MIN.) = 4.5 mA type
If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
Caution
Parameter
Symbol
CMOS Level
MIN. MAX. MIN. MAX.
TTL Level Unit
V
DD
V
IH
V
IL
t
r
t
f
V
P
V
N
V
H
4.5
0.7 V
DD
0
0
0
1.8
0.6
0.3
5.5
V
DD
0.3 V
DD
200
200
4.0
3.1
1.5
4.75
2.2
0
0
0
1.2
0.6
0.3
5.25
V
DD
0.8
200
200
2.4
1.8
1.5
V
V
V
ns
ns
V
V
V
Supply voltage
High-level input voltage
Low-level input voltage
Input rise time
Input fall time
Positive trigger voltage
Negative trigger voltage
Hysteresis voltage
Parameter Symbol Conditions MIN. TYP. MAX. Unit
I
DDS
I
OZ
I
OS
I
I
I
I
I
I
I
I
V
OH
V
OH
V
OL
–45
–0.35
45
V
DD
– 0.1
2.6
0.1
±10
–5
–131
–1.0
131
280
±10
–250
±10
–320
–2.2
320
0.1
A
A
mA
A
A
mA
A
V
V
V
V
I
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= 0V
V
I
= V
DD
or GND
V
I
= GND
V
I
= GND
V
I
= V
DD
I
OH
= 0mA
I
OH
= 0mA
I
OL
= 0mA
Static current consumption
Off-state output leakage current
Output short-circuit current
High-level output voltage (CMOS)
High-level output voltage (TTL)
Low-level output voltage
Normal input
with pull-up (50 kΩ)
with pull-up (5 kΩ)
with pull-down (50 kΩ)
Input leakage
current
Remark The above values are under the recommended operating conditions shown above.
For the details of the DC characteristics when other supply voltage (3.0 V ± 10%) is used, refer to the Design Manual.
µµ
µ
µµ
180 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-8 Family
Available Models (2-layer wiring)
11712 21504 32000 42688
7027 12902 19200 25612
172 228 268 308
0.29 ns (fanout: 2, wiring length: 2 mm)
0.20 ns (fanout: 2, wiring length: 2 mm)
0.36 ns (fanout: 2, wiring length: 2 mm)
1.73 ns (CL = 15 pF)
IOL = 3.0, 6.0, 9.0, 12.0, 18.0, 24.0 mA
5 V ± 10% (CMOS level), 5 V ± 5% (TTL level)
* 2-input NAND conversion ** Cell utilization rate: 60 %
PD65800 PD65801 PD65802 PD65803
Number of integrated gates*
Number of usable gates**
Number of padsNote
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµ
42688
32016
308
0.29 ns (fanout: 2, wiring length: 2 mm)
0.20 ns (fanout: 2, wiring length: 2 mm)
0.36 ns (fanout: 2, wiring length: 2 mm)
1.73 ns (CL = 15 pF)
IOL = 3.0, 6.0, 9.0, 12.0, 18.0, 24.0 mA
5 V ± 10% (CMOS level), 5 V ± 5 % (TTL level)
* 2-input NAND conversion ** Cell utilization rate: 75 %
PD65804
58752
44064
356
PD65806
82432
61824
420
PD65808
103680
77760
468
PD65810
138776
104082
524
PD65811
176720
132540
588
PD65812
233280
174960
676
PD65813
Number of integrated gates*
Number of usable gates**
Number of padsNote
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµ µµµµ
Available Models (3-layer wiring)
Selection Guide X10679EJHV0SG00 181
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-8 Family
Library
I/O buffer
Function
Input buffer
Output buffer
Bidirectional buffer
Low-noise buffer
Fail-safe buffer
PCI buffer
GTL (under development)
D-PLL (under development)
Oscillation circuit
Function block
Function
Logic gate
Buffer
Inverter
3-state buffer
Clock driver
Delay
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Others
Memory block
Function
High-speed single-port RAM
High-speed dual-port RAM
High-density single-port RAM
ROM
Mega macro
Function
DMA controller
Serial interface unit
Parallel interface unit
Timer/counter
Interrupt controller
Absolute Maximum Ratings Recommended Operating Conditions
DC Characteristics
Characteristics
Parameter Symbol Rating Unit
V
DD
V
I
/V
O
I
O
I
O
I
O
I
O
I
O
I
O
T
A
T
stg
–0.5 to +6.5
–0.5 to V
DD
+ 0.5
60
Note1
40
Note2
30
Note3
20
Note4
15
Note5
10
Note6
–40 to +85
–65 to +150
V
V
mA
mA
mA
mA
mA
mA
°C
°C
Supply voltage
Input/output voltage
Output current
Output current
Output current
Output current
Output current
Output current
Operating temperature
Storage temperature
1. I
OL
(MIN.) = 24.0 mA type
2. I
OL
(MIN.) = 18.0 mA type
3. I
OL
(MIN.) = 12.0 mA type
4. I
OL
(MIN.) = 9.0 mA type
5. I
OL
(MIN.) = 6.0 mA type
6. I
OL
(MIN.) = 3.0 mA type
Notes
If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
Caution
Parameter
Symbol
CMOS Level
MIN. MAX. MIN. MAX.
TTL Level Unit
V
DD
V
IH
V
IL
t
r
t
f
V
P
V
N
V
H
4.5
0.7 V
DD
0
0
0
1.8
0.6
0.3
5.5
V
DD
0.3 V
DD
200
200
4.0
3.1
1.5
4.75
2.2
0
0
0
1.2
0.6
0.3
5.25
V
DD
0.8
200
200
2.4
1.8
1.5
V
V
V
ns
ns
V
V
V
Supply voltage
High-level input voltage
Low-level input voltage
Input rise time
Input fall time
Positive trigger voltage
Negative trigger voltage
Hysteresis voltage
Parameter Symbol Conditions MIN. TYP. MAX. Unit
I
DDS
I
OZ
I
OS
I
I
I
I
I
I
I
I
V
OH
V
OH
V
OL
–45
–0.35
45
V
DD
– 0.1
2.6
0.1
±10
–5
–131
–1.0
131
200
±10
–250
±10
–320
–2.2
320
0.1
A
A
mA
A
A
mA
A
V
V
V
V
I
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= 0V
V
I
= V
DD
or GND
V
I
= GND
V
I
= GND
V
I
= V
DD
I
OH
= 0 mA
I
OH
= 0 mA
I
OL
= 0 mA
Static current consumption
Off-state output leakage current
Output short-circuit current
High-level output voltage (CMOS)
High-level output voltage (TTL)
Low-level output voltage
Normal input
with pull-up (50 kΩ)
with pull-up (5 kΩ)
with pull-down (50 kΩ)
Input leakage
current
Remark The above values are under the recommended operating conditions shown above. For the details refer to the Design Manual.
µµ
µ
µµ
182 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Integration
• 3K to 120K gates (number of integrated gates)
• 2K to 74K gates (number of usable gates)
High-speed operation (preliminary)
• t
PD = 0.2 ns (2-input NAND (power gate), fanout = 2, standard wiring length)
• Operating frequency: 60 MHz max.
Function blocks
• RAM block (1 port/2 ports)
• Oscillation block
• CTS block
Gate Array
CMOS Gate Array
CMOS-N5 Family
Features
The CMOS-N5 family is a channel-less type gate array that provides high speed operation with a 5-
V power supply voltage.
Drastic cost reductions have been achieved compared with the conventional CMOS-6 and CMOS-8
families thanks to higher integration by the adoption of 0.5
µ
m technology (2-layer wiring), and
lowering the package assembly cost.
CMOS-6 Family
NEW
CMOS-8 Family
CMOS-N5 Family
Selection Guide X10679EJHV0SG00 183
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-N5 Family
Available Models (Preliminary)
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µ
0.29 ns (fanout: 2, standard wiring length)
0.20 ns (fanout: 2, standard wiring length)
0.36 ns (fanout: 2, standard wiring length)
1.73 ns (C
L
= 15 pF)
I
OL
= 3, 6, 9, 12, 18, 24 mA
5 V ± 10 % (CMOS level)
* 2-input NAND conversion ** Cell utilization rate: 60 %
3456
2073
72
PD65880
µµµµµµµµµ
PD65881
5880
3528
88
13952
8371
120
PD65882
25344
15206
160
PD65883
33864
20318
184
PD65884
40768
24460
244
PD65885
56496
33897
284
PD65887
76000
45600
324
PD65889
99528
59716
372
PD65890
123384
74030
412
PD65893
184 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-8L Family
Available Models (2-layer wiring)
0.33 ns (fanout: 2, wiring length: 2 mm)
0.21 ns (fanout: 2, wiring length: 2 mm)
0.71 ns (fanout: 2, wiring length: 2 mm)
1.44 ns (C
L
= 15 pF)
I
OL
= 3, 6, 9, 12, 18, 24 mA
3.3 V ± 0.3 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 60 %
10912
6547
164
PD65840
20832
12499
204
PD65841
30192
18115
212
PD65842
40592
24355
244
PD65843
52528
31516
276
PD65845
61904
37142
300
PD65846
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµ
4480
2912
80
PD65837
7904
5137
104
PD65839
µµ µµµµ
0.33 ns (fanout: 2, wiring length: 2 mm)
0.21 ns (fanout: 2, wiring length: 2 mm)
0.71 ns (fanout: 2, wiring length: 2 mm)
1.44 ns (C
L
= 15 pF)
I
OL
= 3, 6, 9, 12, 18, 24 mA
3.3 V ± 0.3 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 60 %
148256
88953
452
PD65851
202752
121651
524
PD65852
255744
153446
588
PD65853
342000
205200
676
PD65855
488720
293232
804
PD65858
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
102272
61363
380
PD65849
µ
120768
72460
412
PD65850
µ
81984
49190
340
PD65848
µ µµµµµ
Selection Guide X10679EJHV0SG00 185
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-8L Family
Available Models (3-layer wiring)
0.33 ns (fanout: 2, wiring length: 2 mm)
0.21 ns (fanout: 2, wiring length: 2 mm)
0.71 ns (fanout: 2, wiring length: 2 mm)
1.44 ns (C
L
= 15 pF)
I
OL
= 3, 6, 9, 12, 18, 24 mA
3.3 V ± 0.3 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 75 %
10912
8184
164
PD65860
20832
15624
204
PD65861
30192
22644
212
PD65862
40592
30444
244
PD65863
52528
39396
276
PD65865
61904
46428
300
PD65866
81984
61488
340
PD65868
102272
76704
380
PD65869
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµµµµµ
0.33 ns (fanout: 2, wiring length: 2 mm)
0.21 ns (fanout: 2, wiring length: 2 mm)
0.71 ns (fanout: 2, wiring length: 2 mm)
1.44 ns (C
L
= 15 pF)
I
OL
= 3, 6, 9, 12, 18, 24 mA
3.3 V ± 0.3 V
* 2-input NAND conversion (1 cell = 1 gate) ** Cell utilization rate: 75 %
120768
90576
412
PD65870
148256
111192
452
PD65871
202752
152064
524
PD65872
255744
191808
588
PD65873
342000
256500
676
PD65875
488720
366540
804
PD65878
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµµµ
186 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-8L Family
Library
I/O buffer
Function
3 V
Input buffer
Output buffer
Bidirectional buffer
PCI buffer
5 V (level shifter)
Input buffer
Output buffer
Bidirectional buffer
GTL
D-PLL
Function block
Function
Logic gate
Buffer
Inverter
3-state buffer
Clock driver
Delay
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Others
Function
Memory block
High-speed single-port RAM
High-speed dual-port RAM
High-density single-port RAM
ROM
Mega macro
Function
DMA controller
Serial interface unit
Parallel interface unit
Timer/counter
Interrupt controller
Selection Guide X10679EJHV0SG00 187
Semi-Custom IC
Absolute Maximum Ratings
Gate Array
CMOS Gate Array
CMOS-8L Family
Characteristics
Parameter Symbol Rating Unit
V
DD
V
I
/V
O
V
I
/V
O
I
O
I
O
I
O
I
O
I
O
I
O
I
O
I
O
T
A
T
stg
–0.5 to +4.6
–0.5 to +4.6
–0.5 to +6.6
3
Note1
7
Note2
10
Note3
20
Note4
30
Note5
40
Note6
60
Note7
80
Note8
–40 to +85
–65 to +150
V
V
V
mA
mA
mA
mA
mA
mA
mA
mA
°C
°C
Supply voltage
Input/output voltage
(3-V interface block)
I
nput/output voltage
(5-V interface block)
Output current
Output current
Output current
Output current
Output current
Output current
Output current
Output current
Operating temperature
Storage temperature
Notes 1. I
OL
(MIN.) = 1.0 mA type
2. I
OL
(MIN.) = 2.0 mA type
3. I
OL
(MIN.) = 3.0 mA type
4. I
OL
(MIN.) = 6.0 mA type
5. I
OL
(MIN.) = 9.0 mA type
6. I
OL
(MIN.) = 12.0 mA type
7. I
OL
(MIN.) = 18.0 mA type
8. I
OL
(MIN.) = 24.0 mA type
If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
Caution
DC Characteristics
Parameter Symbol Conditions MIN. TYP. MAX. Unit
IDDS
IOZ
IOS
II
II
II
II
VOH
VOH
VOL
–10
–130
30
VDD – 0.1
VDD – 0.2
±10– 5
–40
–350
65
300
±18
–250
±10
–80
–640
130
0.1
VI = VDD or GND
VI = GND
VI = GND
VI = VDD
IOH = 0 mA
IOH = 0 mA
IOL = 0 mA
Static current consumption
Off-state output leakage current
Output short-circuit current
High-level output voltage
(3-V interface block)
High-level output voltage
(5-V interface block)
Low-level output voltage
Normal input
with pull-up (50 kΩ)
with pull-up (5 kΩ)
with pull-down (50 kΩ)
Input leakage
current
Remark 1.
The above values are under the recommended operating conditions shown above. For details, refer to the Design Manual.
2. Blank indicates value is under study.
µµ
µ
µ
µµ
A
A
mA
A
A
A
A
V
V
V
Parameter
Symbol
V
DD
= 3.3V + 0.3V
MIN. MAX. Unit
VDD
VIH
VIH
VIL
VIL
t
r
t
f
VP
VP
VN
VN
VH
VH
3.0
2.0
2.0
0
0
0
0
1.70
2.20
0.60
0.84
1.10
1.36
3.6
VDD
5.5
0.8
0.8
200
200
2.70
2.55
1.20
1.01
1.50
1.54
V
V
V
V
V
ns
ns
V
V
V
V
V
V
Supply voltage
High-level input voltage
(3-V interface block)
High-level input voltage
(5-V interface block)
Low-level input voltage
(3-V interface block)
Low-level input voltage
(5-V interface block)
Input rise time
Input fall time
Positive trigger voltage
(3-V interface block)
Positive trigger voltage
(5-V interface block)
Negative trigger voltage
(3-V interface block)
Negative trigger voltage
(5-V interface block)
Hysteresis voltage
(3-V interface block)
Hysteresis voltage
(5-V interface block)
Recommended Operating Conditions
188 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Features
The CMOS-9HD family is a collection of channel-less gate arrays employing a 0.35-
µ
m technology.
This family consists of 10 masters with 75K to 1.6M gates.
The most outstanding feature of this family is the scale of integration.
The gate density of this family is about 2.5 times higher than that of the existing CMOS-9 family
0.35-
µ
m gate arrays, thanks to improvement of the cell structure.
In addition, the power consumption is 30 % lower, and thanks to new I/O pad layout technology,
this family offers a large number of pins in addition to the high density.
CMOS-9
1.0 0.4
CMOS-9HD
Conventional (CMOS-9)
Gate density: 2.5 times higher
Power consumption: 30% lower
Conventional
Integration
CMOS-8LH
CMOS-8LHD
CMOS-9
CMOS-9HD
High density, low cost, low power consumption,
high speed, large number of packages/interfaces
Selection Guide X10679EJHV0SG00 189
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Available Models (3-layer wiring)
131 ps (2-input NAND, fanout: 1, standard wiring length)
107 ps (2-input NAND, fanout: 1, standard wiring length)
229 ps (fanout: 2, standard wiring length)
1396 ps (C
L
= 15 pF, I
OL
= 9 mA)
I
OL
= 1, 2, 3, 6, 9, 12, 18, 24 mA
3.3 V ± 0.3 V
* 2-input NAND conversion ** Cell utilization rate: 70 % (60 % in the largest four masters)
75740
53018
172
PD65943
100602
70421
196
PD65944
128338
89836
216
PD65945
202630
141841
268
PD65946
312684
218878
324
PD65948
437136
305995
380
PD65949
585390
351234
436
PD65951
835664
501398
516
PD65954
1096452
657871
588
PD65956
1615646
969387
708
PD65958
Internal gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµµµµµµµ
Library
I/O buffer
Function
3 V
Input buffer
Output buffer
Bidirectional buffer
PCI buffer
Low-noise buffer
Fail-safe buffer
5 V (level shifter)
Input buffer
Output buffer
Bidirectional buffer
GTL (under development)
D-PLL (under development)
Function block
Function
Logic gate
Buffer
Inverter
3-state buffer
Clock driver
Delay
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Others
Memory block
Function
High-speed single-port RAM
High-speed dual-port RAM
Mega macro (under development)
Function
DMA controller
Serial interface unit
Parallel interface unit
Timer/counter
Interrupt controller
190 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Characteristics (1/5)
Absolute Maximum Ratings
Parameter Symbol Condition Rating Unit
V
DD
V
I
V
I
V
I
V
O
V
O
V
O
I
O
T
A
T
stg
–0.5 to +4.6
–0.5 to +4.6
–0.5 to +4.6
–0.5 to +6.6
–0.5 to +4.6
–0.5 to +6.6
–0.5 to +6.6
3
7
10
20
30
40
60
75
–40 to +85
–65 to +150
V
V
V
V
V
V
V
mA
mA
mA
mA
mA
mA
mA
mA
˚C
˚C
V
I
< V
DD
+ 0.5 V
V
I
< V
DD
+ 0.5 V
V
I
< V
DD
+ 0.5 V
V
O
< V
DD
+ 0.5 V
V
O
< V
DD
+ 3.0 V
V
O
< V
DD
+ 3.0 V
I
OL
= 1 mA(FV0B)
I
OL
= 2 mA(FV0B)
I
OL
= 3 mA(F
O
09,FV09)
I
OL
= 6 mA(F
O
04,FV04)
I
OL
= 9 mA(F
O
01,FV01)
I
OL
= 12 mA(F
O
02)
I
OL
= 18 mA(F
O
03)
I
OL
= 24 mA(F
O
06)
Supply voltage
Input voltage
3-V input buffer
3-V input buffer
with fail-safe function
5-V input buffer
Output voltage
3-V output buffer
TTL
5-V output buffer
CMOS
5-V output buffer
Output current
Note
Operating temperature
Storage temperature
Input current: Maximum value of current that can flow via input protection diode. Output current: Maximum DC current that
can flow through output pin
Note
Caution
Remark Apart from the buffer with the fail-safe function, apply 5 V or 3 V to the I/O pin after the supply voltage has been stabilized.
If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
Selection Guide X10679EJHV0SG00 191
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Characteristics (2/5)
Recommended Operating Conditions
Parameter Symbol Conditions MIN. TYP. MAX. Unit
V
DD
V
IH
V
IL
V
P
V
N
V
H
V
IH
V
IL
V
P
V
N
V
H
tri
tfi
tri
tfi
3.00
2.00
0
1.50
0.60
1.10
2.00
0
2.20
0.84
1.36
0
0
0
0
3.30 3.60
V
DD
0.80
2.70
1.40
1.50
5.50
0.80
2.55
1.01
1.54
200
200
10
10
V
V
V
V
V
V
V
V
V
V
V
ns
ns
ms
ms
• LVTTL interface buffer
• LVTTL interface buffer with fail-
safe function
• TTL 5-V tolerant interface buffer
• 5-V input buffer
Normal input
Schmitt input
Note
Supply voltage
High-level input voltage
Low-level input voltage
Positive trigger voltage
Negative trigger voltage
Hysteresis voltage
High-level input voltage
Low-level input voltage
Positive trigger voltage
Negative trigger voltage
Hysteresis voltage
Input rise time
Input fall time
Input rise time
Input fall time
Note Do not use this for the clock.
Remark If a signal with a long rise/fall time is input, use a Schmitt trigger input buffer to prevent malfunctioning due to noise
superimposed on the signal line.
Fluctuation of power caused by simultaneous operation of output buffers lower the capability of the Schmitt trigger input
buffer, and therefore, care must be exercised in laying out the pins.
Schmitt
input
Schmitt
input
192 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Characteristics (3/5)
The following values are under the recommended operating conditions shown above. For details,
refer to the Design Manual.
DC Characteristics (1/3)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
I
DDS
I
DDS
I
DDS
I
OZ
I
OZ
I
OZ
I
R
I
OS
I
I
I
I
I
I
I
I
R
PU
R
PU
R
PD
28
280
28
18.9
1.9
18.9
2.0
0
4.0
83
700
83
39.8
4.7
39.8
300
400
800
±10
±10
±10
10
–250
±1.0
190
1900
190
107.1
10.7
107.1
A
A
A
A
A
A
A
mA
A
A
A
A
kΩ
kΩ
kΩ
V
I
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= V
DD
or GND
V
PU
= 5.5 V R
PU
= 2 kΩ
V
O
= 3.0 V
V
O
= GND
V
I
= V
DD
or GND
V
I
= GND
V
I
= GND
V
I
= V
DD
Static current consumption
Note1
PD65943, 65944, 65945
PD65946, 65948, 65949
PD65951, 65954, 65956
PD65958
Off-state output leakage current
Note2
3-V output
TTL 5-V output
CMOS 5-V output
Output sink current
Note3
CMOS 5-V output
Output short-circuit current
Note4
Input leakage current
Normal input
With pull-up resistor (50 kΩ)
With pull-up resistor (5 kΩ)
With pull-down resistor (50 kΩ)
Pull-up resistor (50 kΩ)
Note5
Pull-up resistor (5 kΩ)
Note5
Pull-down resistor (50 kΩ)
Note5
Notes 1.
2.
3.
4.
5.
Remark
The static current consumption increases when an I/O block with pull-up/pull-down resistor is used.
The output off-state current of the TTL and CMOS 5-V 3-state buffer and I/O buffer slightly increases because of the bias
of the 5-V protection circuit.
A sink current flows from the output pin to the internal circuit of the LSI if the TTL and CMOS 5-V output buffer are pulled
up at a voltage higher than the supply voltage of the LSI.
The output short-circuit time is 1 second or less for only 1 pin of the LSI.
The pull-up resistance and pull-down resistance vary depending on the input and output voltages.
µ
µ
µµµµ
µ
µ
µ
µ
µ
µµµµ
The + and – symbols next to the current values in the above figure indicate the direction of the current. Current flowing into
the device is indicated by + and current flowing out is indicated by –.
Note that the CMOS 5-V tolerant output buffer cannot output a DC high level because of its structure.
Selection Guide X10679EJHV0SG00 193
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Characteristics (4/5)
DC Characteristics (2/3)
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
I
OL
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
V
OL
= 0.4 V
Low-level output current
Note1
3-V output type
3.0-mA type FO09
6.0-mA type FO04
9.0-mA type FO01
12.0-mA type FO02
18.0-mA type FO03
24.0-mA type FO06
Low-level output current
Note1
TTL 5-V output
1.0-mA type FV0A
2.0-mA type FV0B
3.0-mA type FV09
6.0-mA type FV04
9.0-mA type FV01
12.0-mA type FV02
18.0-mA type FV03
24.0-mA type FV06
Low-level output current
Note1
CMOS 5-V output
3.0-mA type FY09
6.0-mA type FY04
9.0-mA type FY01
12.0-mA type FY02
18.0-mA type FY03
24.0-mA type FY06
Notes 1. The specifications of the buffers with the same driving capabilities are the same.
2. 2.00 mA for type with 5-kΩ pull-up resistor
Remark The + and – symbols next to the current values in the above figure indicate the direction of the current. Current flowing
into the device is indicated by + and current flowing out is indicated by –.
Note that the CMOS 5-V tolerant output buffer cannot output a DC high level because of its structure.
Parameter Symbol Conditions MIN. TYP. MAX. Unit
3.00
Note2
6.00
9.00
12.00
18.00
24.00
1.00
2.00
3.00
6.00
9.00
12.00
18.00
24.00
3.00
6.00
9.00
12.00
18.00
24.00
194 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
CMOS Gate Array
CMOS-9HD Family
Characteristics (5/5)
DC Characteristics (3/3)
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
I
OH
V
OL
V
OL
V
OL
V
OL
V
OH
V
OH
–3.00
–6.00
–9.00
–12.00
–18.00
–24.00
–1.00
–1.00
–3.00
–3.00
–3.00
–3.00
–6.00
–6.00
V
DD
– 0.1
V
DD
– 0.2
0.1
0.2
0.1
1
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
V
V
V
V
V
V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
V
OH
= 2.4 V
I
OL
= 0 mA
I
OL
= 0 mA
I
OL
= 0 mA
I
OL
= 0 mA
I
OH
= 0 mA
I
OH
= 0 mA
High-level output current
Note
3-V output type
3.0-mA type FO09
6.0-mA type FO04
9.0-mA type FO01
12.0-mA type FO02
18.0-mA type FO03
24.0-mA type FO06
High-level output current
Note
TTL 5-V output
1.0-mA type FV0A
2.0-mA type FV0B
3.0-mA type FV09
6.0-mA type FV04
9.0-mA type FV01
12.0-mA type FV02
18.0-mA type FV03
24.0-mA type FV06
Low-level output current
Note
3-V output type
3-V output type
(with 5-kΩ pull-up resistor)
TTL 5-V output
CMOS 5-V output
High-level output voltage
3-V output type
TTL 5-V output
Note The specifications of the buffers with the same driving capabilities are the same.
Remark The + and – symbols next to the current values in the above figure indicate the direction of the current. Current flowing into
the device is indicated by + and current flowing out is indicated by –.
Note that the CMOS 5-V tolerant output buffer can not output a DC high level because of its structure.
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Selection Guide X10679EJHV0SG00 195
Semi-Custom IC
Gate Array
BiCMOS Gate Array
QB-8 Family
Features
The QB-8 family is a collection of BiCMOS gate arrays that offer high speed, low power
consumption, and high density, and a price comparable to CMOS devices through the use of an
innovative of cell structure and technology, radicaly changing the image of conventional BiCMOS gate
arrays.
These gate arrays help increase the speed and decrease the power consumption of many elec-
tronic systems such as office machines and communications equipment.
High-speed operation
• Internal gate
tPD = 107 ps (2-input NAND, fanout: 1, wiring length: 0 mm)
tPD = 191 ps (2-input NAND, fanout: 2, wiring length: 2 mm)
• Power gate
tPD = 142 ps (2-input NAND, fanout: 2, wiring length: 2 mm)
Super low power consumption
1.09
µ
W = (per gate, VDD = 3.3 V at 1 MHz)
Function block
Compatible with CMOS-8L family
Many high-speed interfaces
Maximum operating output frequency
• LVTTL 100 MHz
• GTL 200 MHz
• PECL 250 MHz
• PCI 66 MHz
• HSTL 250 MHz
• LVDS 300 MHz
196 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
BiCMOS Gate Array
QB-8 Family
Available Models
107 ps (fanout: 1, wiring length: 0 mm), 191 ps (fanout: 2, wiring length: 2 mm)
142 ps (fanout: 2, wiring length: 2 mm)
289 ps (fanout: 2, wiring length: 2 mm)
1.64 ns (load: 15 pF, I
OL
= 18 mA)
I
OL
= 1, 2, 3, 6, 9, 12, 18, 24 mA
LVTTL, TTL, GTL, HSTL, PECL, PCI
* 2-input NAND conversion **Cell utilization rate: 70 %
3.3V ± 0.3V
Supply voltage
32832
22982
180
PD67821
44352
31046
204
PD67822
56800
39760
228
PD67823
69520
48664
240
PD67824
93184
65229
284
PD67825
123808
86666
324
PD67826
Number of integrated gates*
Number of usable gates**
Number of pads
Note
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
I/O interface level
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµµµ
107 ps (fanout: 1, wiring length: 0 mm), 191 ps (fanout: 2, wiring length: 2 mm)
142 ps (fanout: 2, wiring length: 2 mm)
289 ps (fanout: 2, wiring length: 2 mm)
1.64 ns (load: 15 pF, IOL = 18 mA)
IOL = 1, 2, 3, 6, 9, 12, 18, 24 mA
LVTTL, TTL, GTL, HSTL, PECL, PCI
* 2-input NAND conversion **Cell utilization rate: 70 %
3.3 V ± 0.3 V
136752
95726
340
PD67827
167280
117096
372
PD67828
234280
164024
436
PD67829
292896
205027
484
PD67830
381840
267288
548
PD67831
Supply voltage
Number of integrated gates*
Number of usable gates**
Number of padsNote
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
I/O interface level
Remark
Density Delay time
Note
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of the package.
µµµµµ
Selection Guide X10679EJHV0SG00 197
Semi-Custom IC
Gate Array
BiCMOS Gate Array
QB-8 Family
Library
I/O buffer
Function
3 V
Input buffer
Output buffer
Bidirectional buffer
PCI buffer
HSTL buffer
Low-noise buffer
Fail-safe buffer
5 V (level shifter)
Input buffer
GTL
PECL
LVDS
Function block
Function
Logic gate
Buffer
Inverter
3-state buffer
Clock driver
Delay
Adder
Decoder
Multiplexer
Latch
Flip-flop
Shift register
Counter
Others
Memory block
Function
High-speed single-port RAM
High-speed dual-port RAM
High-density single-port RAM
High-density dual-port RAM
Mega macro (under development)
Function
DMA controller
Serial interface unit
Parallel interface unit
Timer/counter
Interrupt controller
198 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Gate Array
BiCMOS Gate Array
QB-8 Family
Characteristics (1/2)
Absolute Maximum Ratings
Parameter Symbol Condition Rating Unit
V
DD
V
I
V
I
V
I
V
O
V
O
I
O
T
A
T
stg
–0.5 to +4.6
–0.5 to +4.6
–0.5 to +4.6
–0.5 to +6.6
–0.5 to +4.6
–0.5 to +6.6
3
7
10
20
30
40
60
80
–40 to +85
–65 to +150
V
V
V
V
V
V
mA
mA
mA
mA
mA
mA
mA
mA
°C
°C
V
I
< V
DD
+ 0.5 V
V
I
< V
DD
+ 0.5 V
V
I
< V
DD
+ 0.5 V
V
O
< V
DD
+ 0.5 V
V
O
< V
DD
+ 3.0 V
I
OL
= 1 mA(FV0A)
I
OL
= 2 mA(FV0B)
I
OL
= 3 mA (F
O
09,FV09,FW09)
I
OL
= 6 mA (F
O
04,FV04,FW04)
I
OL
= 9 mA (F
O
01)
I
OL
= 12 mA (F
O
02)
I
OL
= 18 mA (F
O
03)
I
OL
= 24 mA (F
O
06)
Supply voltage
Input voltage
3-V input buffer
3-V input buffer
with fail-safe function
5-V input buffer
Output voltage
3-V output buffer
5-V output buffer
Output current
Note
Operating temperature
Storage temperature
Note
Caution
Remark
Output current: Maximum DC current that can flow through output pin
If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
Apart from the buffer with the fail-safe function, apply 5 V or 3 V to the I/O pin after the supply voltage has been stabilized.
Recommended Operating Conditions
Parameter Symbol Conditions MIN. TYP. MAX. Unit
V
DD
V
IH
V
IL
V
P
V
N
V
H
V
IH
V
IL
V
P
V
N
V
H
t
ri
t
fi
t
ri
t
fi
3.00
2.00
0
1.50
0.60
1.10
2.00
0
2.20
0.84
1.36
0
0
0
0
3.30 3.60
V
DD
0.80
2.70
1.40
1.50
5.50
0.80
2.25
1.01
1.54
200
200
10
10
V
V
V
V
V
V
V
V
V
V
V
ns
ns
ms
ms
3-V interface
5-V interface
Normal input
Schmitt input
Note
Supply voltage
High-level input voltage
Low-level input voltage
Positive trigger voltage
Negative trigger voltage
Hysteresis voltage
High-level input voltage
Low-level input voltage
Positive trigger voltage
Negative trigger voltage
Hysteresis voltage
Input rise time
Input fall time
Input rise time
Input fall time
Note Do not use this for the clock.
Selection Guide X10679EJHV0SG00 199
Semi-Custom IC
Gate Array
BiCMOS Gate Array
QB-8 Family
Characteristics (2/2)
DC Characteristics
Parameter Symbol Conditions MIN. TYP. MAX. Unit
I
DDS
I
OZ
I
OZ
I
R
I
OS
I
I
I
I
I
I
I
I
V
OH
V
OH
V
OL
V
OL
–30
–300
30
V
DD
– 0.1
V
DD
– 0.2
15
9
5
2
–66
–660
66
4800
3000
1500
700
±10
±14
14
–250
±10
–144
–1440
144
0.1
0.1
A
A
A
A
A
A
A
mA
A
A
A
A
V
V
V
V
V
I
= V
DD
or GND
V
O
= V
DD
or GND
V
O
= V
DD
or GND
V
PU
= 5.5 V R
PU
= 2 kΩ
V
O
= 3.0 V
V
O
= GND
V
I
= V
DD
or GND
V
I
= GND
V
I
= GND
V
I
= V
DD
I
OH
= 0 mA
I
OH
= 0 mA
I
OL
= 0 mA
I
OL
= 0 mA
Static current consumption
PD67830,67831
PD67827,67828,67829
PD67824,67825,67826
PD67821,67822,67823
Off-state output current
3-V output
5-V output
Output sink current
5-V output
Output short-circuit current
Input leakage current
Normal input
with pull-up resistor (50 kΩ)
with pull-up resistor (5 kΩ)
with pull-down resistor (50 kΩ)
High-level output voltage
3-V output
5-V output
Low-level output voltage
3-V output
5-V output
Remarks 1. The above values are under the recommended operating conditions shown above.
For details, refer to the Design Manual.
2. Blank indicates values are under study.
µµµµ
µµµµ
µµµµ
µ
µµ
200 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
Cell-Based IC Line-Up (1/2)
A cell-based IC is an LSI that is designed combining large-scale macros such as existing CPU and
memories, and user’s own circuits. Because its internal logic cells are optimally designed according to
their functions, a large scale of integration with low current consumption can be realized even if the
circuit consists of only logic, as compared with gate arrays.
In addition, a system-on-chip that integrates a high-performance CPU core with analog macros such
as A/D and D/A converters can be realized.
Many families available
Families are available for each technology.
0.8
µ
m CMOS family :CB-C7 family (HD/FT/VX type)
0.5
µ
m CMOS family :CB-C8 family (VX/VM type)
0.35
µ
m CMOS family :CB-C9 family (VX/VM type)
0.25
µ
m CMOS family :CB-C10 family
The CB-C8 family VM type and CB-C9 family VM type can easily interface with 5-V and 3.3-V signals
by using a buffer with level shifter in a system where 5 V and 3.3 V are used together.
The CB-C9 family VX type internally operates at 2.0 V and has a 3.3-V interface, and is ideal for
portable systems where low power consumption is required, such as cellular telephones.
The CB-C10 family can internally operate at 2.5 V and have a 2.5 or 3.3 V interface to allow larger-
scale systems with lower power consumption. (For details of the CB-C10 family, refer to the description
in the section titled 0.25
µ
m ASIC in this pamphlet.)
Series development of Cell-Based ICs
CB-C9 family
(0.35
µ
m)
CB-C10 family
(0.25
µ
m)
CB-C8 family
(0.5
µ
m)
CB-C7 family
(0.8
µ
m)
3.3V
5V
High density, low
power consumption
Multiple power supplies
High density, low
power consumption
Multiple power supplies
High density
91 92 93 94 95 96 97 99
98
≤
3.3V
CB-C7FT (ES, short turn around time series)
CB-C7HD (5V single power supply, high speed series)
CB-C7VX (5V single power supply, medium speed, improved cost effectiveness)
CB-C8HD (Being replaced by CB-C8VX)
CB-C9 (Being replaced by CB-C9VX)
CB-C8VX (0.5 m) 3.3V/5VTTL
CB-C8VM
CB-C9VX (0.35 m)
CB-C9VM
CB-C10
(3V, 5V
full interface)
(3V, 5V full interface)
Front-end process
Density • function
Super high density,
low power consumption series
µ
µ
Selection Guide X10679EJHV0SG00 201
Semi-Custom IC
Cell-Based IC
Cell-Based IC Line-Up (2/2)
3K 5K 10K 50K 100K 500K 1M 2M 5M10M 20M
40M
60M
80M
100M
CB-C7VX (V
DD
= 3V)
CB-C7VX (V
DD
= 5V)
CB-C7FT (V
DD
= 5V)
CB-C7HD (V
DD
= 5V)
CB-C8VX/VM
(V
DD
= 3.3V)
CB-C9VX/VM
(V
DD
= 3.3V)
CB-C10
(V
DD
= 2.5V)
Comparison of performance of each series
Transition of power consumption
The operating frequency
shown here is for your
reference only. In practice,
the frequency is determined
depending on your circuit
configuration and must be
decided for each product
(the frequency may be
higher or lower than the
value shown here,
depending on the circuit).
Operating frequency : f
S
(Hz)
Power consumption ( W/MHz/Gate)
Number of usable gates [gates]
Number of usable gates [gates] (MAX)
µ
4
3
2
1
0.5
200K100K 300K 500K 1M 2M 3M 5M 10M
CB-C9VX/VM
(V
DD
= 3.3V)
CB-C7VX
(V
DD
= 3V)
CB-C7HD
(V
DD
= 3V)
CB-C9VX/VM
(V
DD
= 2.0V)
CB-C7HD (V
DD
= 5V)
CB-C7VX (V
DD
= 5V)
CB-C10 (V
DD
= 2.5V)
CB-C8VX/VM (V
DD
= 3.3V)
Caution
202 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Many cores available
The need for system-on-chip is satisfied by CPU peripheral cores, memory macros, and analog
masters such as A/D and D/A, as well as a high-performance CPU.
High-density memory macros, RAM and ROM, can be integrated by means of the memory compiled
method.
Notes 1. The values of the operating frequency shown above are for your reference only. In practice, the value of the operating
frequency varies depending on your circuit configuration.
2. CB-C7, 3V: VDD = 3.0 V ± 0.3 V
CB-C8VX/VM, CB-C9VX/VM, CB-C10: VDD = 3.3 V ± 0.3 V
3. CB-C9VX, 2V: VDD = 2.0 V ± 0.2 V
CB-C10: VDD = 2.5 V ± 0.2 V
Cell-Based IC
Guide to Selecting Cell-Based ICs
5V, single
5V/3V,
double Note2
3V,
single Note2
3V Note2 /
2V Note3,
double
Voltage that can be supplied
Operating frequency
(for your reference)
I/O signal
CB-C7VX is recommended
in terms of cost.
CB-C7HD/FT is recommended.
Consider a 2-power supply system.
CB-C8VM or CB-C9VM
CB-C8VX or CB-C9VX
CB-C9VX
CB-C10
< 30 MHz Note1
< 60 MHz Note1
> 60 MHz Note1
Operating frequency
(for your reference)
Circuit size
< 15 MHz Note1
< 100 MHz Note1
> 100 MHz Note1
< 1M gates
> 1M gates
5V full-swing output required
(only CMOS I/F operates on 5V)
5V full-swing output not required
(only TTL I/F operates on 5V)
Selection Guide X10679EJHV0SG00 203
Semi-Custom IC
FT type : Short turn around time realized by gate ar-
ray method (substrate is developed first)
HD type : High speed and high density by employing
dedicated cells
VX type Note : Super high density by employing dedicated
cells and small transistors
Note The applications of the VX type are limited.
FT vs. HD vs. VX selection
• Comparison of features of each type
• Comparison of cell area (average of all blocks)
FT HD VX
Turn around time OO
Speed O
Density O
Power consumption OO
Cell-Based IC
CB-C7 Family
Features
Three types available
FT
(S.O.G) HD
(dedicated cell)
VX
(dedicated cell)
1.0
1.2 : 0.8:
FEB FEB
Library
Macro: CPU,
CPU peripherals,
memories
(compiled type)
Functional cell
I/O buffer
Technology
Technology
: 0.8- m CMOS
2-/3-layer wiring
Density : 270,000 gates
Number of I/Os : 440
Delay time : 0.33 ns
User logic
HD type
VX type FT type
28
TH
JAN
2
ND
2
ND
JAN
2
ND
Small chip area,
low cost Short turn around time
µ
204 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
CB-C7 Family
Product Outline
Type name
Part number
CPU, peripherals
Derivative models
Note 1
Supply voltage
Interface level
Number of usable gates
Note 2
Internal gate
Input buffer
Output buffer
Power consumption
(internal gate)
Output drive capability
FT type/HD type/VX type
CMOS, TTL compatible
5 V ± 10 %, 3 V ± 10 %
FT: 167K gates (MAX.)/HD: 223K gates (MAX.)/VX: 273K gates (MAX.)
Delay time
PD93000
µµµµ
PD94000 PD95100 PD96100
—
—O—O
O
FT,HD : 0.33ns
Note 3
/0.44ns(5V), 0.67ns
Note 3
/0.90ns(3V) [F/O=2,L=2mm]
VX : 0.90ns
Note 3
/2.10ns(5V), 1.54ns
Note 3
/3.42ns(3V) [F/O=2,L=2mm]
FT,HD : 1.6 ns(5 V,I
OL
= 8 mA), 3.0 ns(3 V,I
OL
= 4.4 mA) [C
L
= 15 pF]
VX : 1.7 ns(5 V,I
OL
= 8 mA), 3.0 ns(3 V,I
OL
= 4.4 mA) [C
L
= 15 pF]
FT,HD : 3.90 W/MHz/gate(5 V), 1.41 W/MHz/gate(3 V)
VX : 3.21 W/MHz/gate(5 V), 1.17 W/MHz/gate(3 V)
FT,HD : 0.60 ns(5 V), 0.76 ns(3 V) [F/O = 2, L = 2 mm]
VX : 1.25 ns(5 V), 2.18 ns(3 V) [F/O = 2, L = 2 mm]
I
OL
= 4,8,12,24,48 mA(5 V)
I
OL
= 2.2,4.4,6.6 mA(3 V)
Notes 1. ROM code changeable. O: Derivative models available, —: No derivative models available
2. Number of gates if hard macro is not integrated (2-input NAND gate conversion)
3. Power gate
µ
µµ
µ
Selection Guide X10679EJHV0SG00 205
Semi-Custom IC
Cell-Based IC
CB-C8 Family VX/VM Type
Features
High-density, power-saving type and 2-power supply type available
VX type : Density 1.5 times (MAX.) higher and power consumption 20% lower than existing type
VM type : 2-power supply full-swing interface in system where 5-V and 3.3-V power sources are used
together
Interface level
3.3 V 5 V
CB-C8
VM type
CMOS (5 V)
TTL (5 V)
LVTTL (3.3 V)
PCI (5 V)
PCI (3.3 V)
CMOS (5 V)
LVTTL
(3.3 V, 5 V tolerances)
LVTTL (3.3 V)
PCI (5 V)
PCI (3.3 V)
TTL (5 V)
3.3 V
LVTTL (3.3 V) CB-C8
VX type
LVTTL (3.3 V)
LVTTL
(3.3V, 5 V tolerances)
PCI (3.3 V) PCI (3.3 V)
Product Outline (VX/VM type)
Type name
Part number
Derivative models Note 1
Technology
Supply voltage
Interface level
Number of usable gates
Note 2
Internal gate
Input buffer
Output buffer
Power consumption
(internal gate)
Output drive capability
VX type VM type
LVTTL (including 5 V tolerance)
3.3V ± 0.3V, single
1000K gates (MAX.)
Delay time
PD97000 PD99000
µµ
OO
0.16 ns Note 3/0.34 ns [F/O = 2, L = 1mm]
0.5 m rule CMOS (Ti silicide), aluminum 2-layer/3-layer wiring
Notes 1. ROM code changeable. O: Derivative models available
2. Number of gates if hard macro is not integrated [2-input NAND gate conversion]
3. 2 NAND power gate
5 V CMOS/TTL
LVTTL (including 5 V tolerance)
Internal: 3.3 V ± 0.3 V
I/O block: 5 V ± 10%, 3.3 V ± 0.3 V
3.3-V LVTTL: 0.26 ns [F/O = 2, L = 1 mm]
5-V tolerant LVTTL: 0.33 ns [F/O = 2, L = 1 mm]
5-V full swing: 0.72 ns [F/O = 2, L = 1 mm]
3.3-V LVTTL: 1.24 ns (IOL = 9 mA) [CL = 15 pF]
5-V tolerant LVTTL: 1.88 ns (IOL = 9 mA) [CL = 15 pF]
5-V full swing: 2.30 ns (IOL = 9 mA) [CL = 15 pF]
Standard block (F, L blocks): 1.04 W/MHz/gate (3.3 V)
Low power consumption block (Y block): 0.75 W/MHz/gate (3.3 V)
IOL = 3, 6, 9, 12, 18, 24 mA [for 3-V interface]
IOL = 1, 2, 3, 6. 9 mA [for 5-V interface (5 V tolerance)]
—
IOL = 1, 2, 3, 6, 9, 12, 18 mA
[for 5-V full swing]
µ
µ
µ
206 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Multi-power supply
Many core libraries
• Internal 2.0 V External 3.3 V
• Internal 3.3 V External 5 V
Interface buffer
• PCI • GTL+ • HSTL • SSTL
• Rambus
TM
IO • USB
• V850 family
TM
• 78K/0
• V30MX
TM
• Z80
TM
• DSP (SPX)
• RTC
• UART + FIFO
• Parallel IO
• Timer
• General-purpose A/D, D/A
• High-speed A/D, D/A
• PLL
•
High-speed/high-density RAM
• High-speed ROM
• LINE BUFFER
• IrDA
• USB (SIE)
• JPEG
• PCI
• PCMCIA
Game machines,
3D graphics systems
Portable systems
Audio/visual systems (DVC, DVD, etc.)
Office machines (PC, printer, etc.)
Remark The above cores and buffers include those
still under development.
Cell-Based IC
CB-C9 Family VX/VM Type
Features
The CB-C9 family VX/VM type is a collection of cell-based ICs employing a 0.35-
µ
m technology.
The VX type realizes an I/O voltage of 3.3 V and internal voltage of 2.0 V, and the VM type realizes
an I/O voltage of 5 V and internal voltage of 3.3 V. These cell-based ICs are suitable for systems
where low power consumption is required.
CB-C9 family VX/VM type
Selection Guide X10679EJHV0SG00 207
Semi-Custom IC
Cell-Based IC
CB-C9 Family VX/VM Type
Product Outline (VX/VM type)
Part Number
Type name
Output buffer
Note5
Input buffer
Note4
1.7-M usable gate 1.6-M usable gate
114 ps
169 ps — 690 ps 169 ps
864 ps
0.3 W/MHz/gate 0.12 W/MHz/gate 0.3 W/MHz/gate
— 2045 ps 864 ps
207 ps 114 ps 114 ps
Power consumption
(internal gate)
Notes 1. ROM code changeable. O: Derivative models available
2. Number of gates if hard macro is not mounted (2-input NAND conversion)
3. 2-input NAND power gate, fanout = 2, standard wiring length
4. fanout = 2, standard wiring length
5. Load capacitance: 15 pF, I
OL
= 18 mA
VM typeVX type
Interface level
Number of usable gates
Note2
Derivative models
Note1
O
LVTTL, TTL, 5-V CMOS (VM Type only)
Delay time
Technology 0.35 m rule CMOS, aluminum 2-layer/3-layer wiring
Supply voltage I/O block 3.3 V ± 0.3 V 5.0 V ± 10 % 3.3 V ± 0.3 V
Supply voltage internal block 3.3 V ± 0.3 V 2.0 V ± 0.2 V 3.3 V ± 0.3 V
Internal gate
Note3
PD822XX
µ
µµ µ
PD826XX
µ
µ
208 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
Library
CPU core
General-purpose
model
Remark O : can be supported, : under development, — : cannot be supported, blank : under study
CB-C7
(5 V)
Z80
V20HL
TM
V30HL
TM
V30MX
V30MT
V30MZ
V30MZC
TM
78K/0
V851
TM
V853
TM
V850E
V830 family
TM
V
R
series
TM
PD70008A
PD70108H
PD70116H
O
O
O
O
—
—
—
—
—
—
—
—
—
CB-C7
(3 V)
O
O
O
—
—
—
—
—
—
—
—
—
—
CB-C8
(HD)
O
—
—
O
—
—
—
—
—
—
—
—
—
CB-C8
(VX/VM) CB-C9
(VX/VM)
O
—
—
O
O
—
—
—
—
—
—
—
—
O
—
—
O
O
O
O
O
O
µµµ
Features of V850E core
CPU performance (Dhrystone): 87 MIPS (at 66 MHz)
V850 RISC CPU adopting 5-stage pipeline method. The object coding efficiency of C compilation
has been improved and the program size has been reduced using 2-byte length basic instructions and
instructions compatible with high-level language.
Two kinds of bus interface, VSB and NPB
• VSB: Bus operates synchronously with the CPU clock. It is used for connecting high-speed periph-
eral macros such as peripheral I/O provided with a memory controller and FIFO interface.
• NPB: Bus operates asynchronously with the CPU clock. It is used for connecting low-speed periph-
eral macros such as a timer and serial interface.
Instruction set: Completely compatible with V850E series 32-bit single-chip microcontrollers.
Selection Guide X10679EJHV0SG00 209
Semi-Custom IC
Cell-Based IC
Library
Functional Outline of V850E Core
NPB Peripheral Macro for V850E Core
Function
Remark : Under development
CB-C9 (VX/VM)Macro name
Prescaler
PWM
16-bit timer/counter
16-bit interval timer
UART
Serial I/O
PRS1
PWM
TMC
TMD
UART5
SIO
Register set Item
Program area: 64M bytes linear
Data area: 4G byte linear
Internal ROM size: 0 to 1M bytes
Internal RAM size: 4K/12K/28K/60K bytes
Memory bank division function
VSB (V850E) system bus
• Separate address/data bus (28-bit address/32-bit data bus)
• 32/16/8-bit bus sizing function
• Bus hold function
• External wait function
NPB (NEC peripheral I/O bus)
• Separate address/data bus (14-bit address/16-bit data bus)
• Programmable wait function
• Retry function
4-channel configuration
Transfer unit: 8 bits, 16bits, 32bits
Maximum number of transfer: 65536 (2
16
)times
Transfer type: Fly-by (1 cycle) transfer, 2-cycle transfer
Transfer mode: Single transfer, single-step transfer, line transfer, block transfer
Terminal count output signal
Function
General-purpose registers 32 bits × 32 + dedicated registers 32 bits × 11
External bus interface
Interrupt
DMA control function
HALT, software STOP, hardware STOP modes
Power save function
Non-maskable
Maskable
Exception
Memory space
Upward compatible with V850 CPU
Signed multiplication (32 bits × 32 bits → 64 bits)
Saturated operation instruction (with overflow/underflow detection function)
32-bit shift instruction: 1clock
Bit manipulation instruction
Load/store instruction with long/short format
Signed load instruction
3
64 (8 priority levels can be specified.)
1
Instruction set
210 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
Library
Features of V851 and V853 core
CPU performance (Dhrystone): 38 MIPS (at 33 MHz)
Executes almost all instructions in 1 clock under control of a 5-stage pipeline based on RISC
architecture.
Linear address space of up to 4G bytes
Supports linear address space of up to 4G bytes as data area and up to 16M bytes as program
area
Instruction set: Completely compatible with V85X series 32-bit single-chip microcontrollers
Functional Outline of V851 Core
Internal
memory Mask ROM
Note
Item
Maskable
16-bit data bus (DIN/DOUT separated)
24-bit address bus
1
14 (8 priority levels can be specified)
16-bit timer/event counter: 1 ch
16-bit interval timer: 1 ch
Note ROM may not be provided.
Function
48K, 64K, 96K, 128K, 256K
Instruction set
Interrupt
Real-time pulse unit
Asynchronous serial interface (UART): 1 ch
Clocked serial interface (CSI): 1 ch
Serial interface
HALT, STOP, IDLE modes
Clock output stop function
Power save function
External bus interface
RAM 4K, 8K, 16K, 24K
Signed multiplication (16 bits ✕ 16 bits —
> 32 bits): 1 to 2 clocks
Saturated operation instruction (with overflow/underflow detection function)
32-bit shift instruction:1 clock
Bit manipulation instruction
Load/store instruction with long/short format
Register set General-purpose register 32 bits ✕ 32 + dedicated register 32 bits ✕ 6
Minimum instruction execution time
30 ns (at 33 MHz)
Non-maskable
Selection Guide X10679EJHV0SG00 211
Semi-Custom IC
Cell-Based IC
Library
Functional Outline of V853 Core
Internal
memory Mask ROM
Note
Item
Maskable
16-bit data bus (DIN/DOUT separated)
24-bit address bus
1
31 (8 priority levels can be specified)
16-bit timer/event counter: 4 ch
16-bit interval timer: 1 ch
Note ROM may not be provided.
Function
48K, 64K, 96K, 128K, 256K
Instruction set
Interrupt
Real-time pulse unit
Asynchronous serial interface (UART)
Clocked serial interface (CSI)
UART/CSI: 2 ch
CSI: 2 ch
Serial interface
PWM output
HALT, STOP, IDLE modes
Clock output stop function
Power save function
External bus interface
RAM 4K, 8K, 16K, 24K
Signed multiplication (16 bits ✕ 16 bits —
> 32 bits): 1 to 2 clocks
Saturated operation instruction (with overflow/underflow detection function)
32-bit shift instruction:1 clock
Bit manipulation instruction
Load/store instruction with long/short format
Register set General-purpose register 32 bits ✕ 32 + dedicated register 32 bits ✕ 6
Minimum instruction execution time
30 ns (at 33 MHz)
Non-maskable
8/9/10/12-bit resolution PWM: 2 ch
212 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
Library
Features of 78K/0 core
• Instruction set: Completely compatible with 78K/0 series 8-bit single-chip microcontrollers
• Many peripheral units such as timer, serial interface, and interrupt controller
• Software development environments available
Functional Outline of 78K/0 Core
General-purpose register
Item
8-bit data bus (DIN/DOUT separated)
16-bit address bus
Internal : 17
External : 12
128 bits MAX. Input : 64 bits (8 bits ✕ 8)
Output : 64 bits (8 bits ✕ 8)
Function
8 bits ✕ 32
Instruction set
Interrupt
Port
16-bit timer/event counter: 1 ch
8-bit timer (PWM output): 2 chs
Watch timer: 1 ch
Watchdog timer: 1 ch
Timer
Asynchronous serial interface (UART): 2 chs
Clocked serial interface (CSI): 2 chs
I
2
C bus interface: 2 chs
Serial interface
HALT, STOP modes
Standby function
External bus interface
Multiplication/division (8 bits ✕ 8 bits, 16 bits 8 bits)
Bit manipulation instruction (set, reset, test, Boolean operation)
Minimum instruction execution time
238.4 ns (at 8.38 MHz)
Maskable
Selection Guide X10679EJHV0SG00 213
Semi-Custom IC
Cell-Based IC
Library
V851, V853, and 78K/0 core dedicated peripheral macros
Function
UART
Serial I/O
16-bit timer
8/16-bit timer
Macro Name CB-C9 (VX/VM)
UART
SIO
TM4
TM5
Remark : can be supported
Features
UART SIO(CSI) TM4 TM5
7/8-bit character length
1/2-bit stop bit length
Parity bit spesification
None/0/odd/even
Baud rate generator
IrDA mode
3-wire synchronous serial
Transfer clock
External clock
fx/2
fx/8
fx/32
16-bit interval timer 8/16-bit timer/event counter
8-bit PWM output
External pulse output
Dedicated external bus interface for V851, V853, or 78K/0 core is provided with each peripheral macro.
Each peripheral macro can be directly connected to each CPU core.
214 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
Library
Features of V30MX series
V30MX core
V30HL upward compatible
2-clock bus cycle realized by separating the address bus and data bus which are multiplexed in
the V30HL.
V30MT core
Small and low-power model of V30MX
• Software compatible with V30HL and V30MX
• Low power consumption realized by deleting internal Hi-Z signal
V30MZ core
• Processing performance comparable to RISC thanks to internal pipeline processing
35 MIPS (66 MHz, 0 wait)
• 1-clock bus cycle
• ICE conforming to N-Wire
• Software compatible with V30HL and V30MX
• 2.0 V supported for CB-C9VX/VM (fMAX = 32 MHz)
V30MZC core
V30MZ with cache memory
• Cache memory capacity: 4K bytes
• 20 MIPS (50 MHz)
• Burst transfer mode supported
CPU core
Remark Specification for CB-C9VX/VM. However, V30MT only is for CB-C8VX/VM
V30MZCV30MX V30MT V30MZ
33 MHz
4.3 MIPS
1.0 mA/MHz
2 clocks
16 MHz
2.6 MIPS
0.8 mA/MHz
2 clocks
66 MHz
35 MIPS
1.2 mA/MHz
1 clock
50 MHz
20 MIPS
T.B.D.
4 clocks (external)
1 clock between cache and CPU
Operating frequency
Performance (0 wait)
Current consumption
Bus cycle
Selection Guide X10679EJHV0SG00 215
Semi-Custom IC
Cell-Based IC
Library
Peripheral macros
Function General-purpose model CB-C9
(VX/VM)
CB-C7
(5 V)
Serial I/O
Timer
Parallel I/O
Interrupt controller
DMAC (8 bits)
Watch
UART + FIFO
FDC + DVFO
IrDA1.1
SIE for USB1.1 full speed
USB function controller for printer
USB function controller for display
Line buffer for PPC (7.5 kW)
PD71051
PD71054
PD71055
PD71059
PD71037
PD4991AL
NS16550
PD72065B
O
O
O
O
O
O
O
—
—
—
—
CB-C7
(3 V)
O
O
O
O
O
O
—
—
—
—
—
—
CB-C8
(VX/VM)
O
O
O
O
O
O
O
O
—
—
—
—
O
O
—
O
—
O
O
O
O
O
µµµµµµ
µ
Remark O : can be supported, : under development, — : cannot be supported, blank : under study
Analog macros
Function Performance CB-C7
8 bits, 100 kHz
10 bits, 100 kHz
12 bits, 300 kHz
8 bits, 50 MHz
10 bits, 30 MHz
8 bits, 100 kHz (1 ch)
10 bits, 100 kHz (1 ch)
8 bits, 20 MHz (3 chs)
8 bits, 30 MHz (3 chs)
9 bits, 30 MHz (2 chs)
10 bits, 30 MHz (3 chs)
10 bits, 85 MHz (1 ch)
For multiplication
For skew adjustment
A/D
D/A
PLL
Analog switch
Comparator
O
—
—
—
—
O
—
O
—
—
—
—
O
—
O
O
CB-C8
(VX/VM) CB-C9
(VX/VM)
O
—
—
—
—
O
—
—
O
O
—
—
O
—
O
O
O
O
O
—
O
—
O
O
O
O
—
Remark O : can be supported, : under development, — : cannot be supported, blank : under study
216 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Cell-Based IC
Library
Compiled macros
Function Performance
Remark O: can be supported, : under development, —: cannot be supported, blank : under study
CB-C7
(5 V)
Multiplier
Register file (2 ports)
Register file (3 ports)
Low-power synchronous 1-port RAM
High-density synchronous 1-port RAM
High-density synchronous 2-port (R + W) RAM
High-speed synchronous 1-port RAM
High-speed synchronous 2-port (R/W + R) RAM
Super high-speed synchronous 1-port RAM
Low-power asynchronous 1-port ROM
High-speed synchronous 1-port ROM
Signed (32 ✕ 32 MAX.)
8K bits MAX.
8K bits MAX.
128K bits MAX.
64K bits MAX.
32K bits MAX.
64K bits MAX.
64K bits MAX.
16K bits MAX.
512K bits MAX.
512K bits MAX.
O
O
O
O
—
—
O
—
—
O
—
CB-C7
(3 V)
O
O
O
O
—
—
—
—
—
O
—
CB-C8
(VX/VM) CB-C9
(VX/VM)
—
O
O
O
—
—
—
O
—
O
—
—
O
O
O
O
O
—
O
Selection Guide X10679EJHV0SG00 217
Semi-Custom IC
Embedded Array
EA-C9HD Family
Features (1/2)
High-density, super high-speed, and low-power consumption embedded array using the most
advanced 0.35
µ
m technology
• High-level function and high-performance LSI compatible to cell-based IC
• Easy development and modification of derivative models
• Short turn around time equivalent to gate array
• Macro maintenance common to cell-based IC (CB-C9/9VX)
The EA-C9HD family is a collection of embedded arrays employing a 0.35-
µ
m technology.
This family consists of 10 masters with 76K to 1.6M gates.
The gate density of this family is about 2.5 times higher than that of the existing EA-C9 family 0.35-
µ
m embedded arrays, thanks to improvement of the cell structure.
In addition, the power consumption is 40 % lower, and thanks to new I/O pad layout technology,
this family offers a large number of pins in addition to the high density.
218 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Embedded Array
EA-C9HD Family
Features (2/2)
Wide variety of macro libraries
User logic
•
Logic gate
•
Decoder
•
Adder
•
Multiplexer
•
Shift register
CPU peripheral core
•
DMA controller ( PD71037)
Note
•
Serial interface ( PD71051)
Note
•
Parallel interface ( PD71055)
Note
•
Timer/counter ( PD71054)
Note
•
Interrupt controller ( PD71059)
Note
•
UART + FIFO ( PD16550D)
Note
•
FDD controller ( PD72065)
Note
I/O buffer
•
Low-noise buffer
•
High-drive buffer
•
Oscillation circuit
Note
•
PCI
•
AGP
Note
Note Macros under development or under study
•
USB
Note
•
HSTL
Note
•
SSTL
Note
•
pECL (input only)
Note
CPU core
•
V30MX
Note
•
V30MZ
Note
PLL
Memory macro
Cell-based IC type
• High-speed synchronous 1-port compiled RAM
• High-speed synchronous 2-port compiled RAM
• High-density synchronous 1-port compiled RAM
• High-density synchronous 2-port compiled RAM
• Super high-speed synchronous 1-port compiled RAM
• Compiled ROM
Note
Gate array type
• Asynchronous 1-port soft macro RAM
• Asynchronous 2-port soft macro RAM
• Asynchronous 1-port compiled RAM
Note
• Asynchronous 2-port compiled RAM
Note
• FIFO
• PLL for skew adjustment
• PLL for multiplication
µ
µ
µ
µµ
µµ
Selection Guide X10679EJHV0SG00 219
Semi-Custom IC
Embedded Array
EA-C9HD Family
Available Models (3-layer wiring)
131 ps (2-input NAND, fanout: 1, standard wiring length)
107 ps (2-input NAND, fanout: 1, standard wiring length)
229 ps (fanout: 2, standard wiring length)
1396 ps (C
L
= 15 pF, I
OL
= 9 mA)
I
OL
= 1, 2, 3, 6, 9, 12, 18, 24 mA
3.3V ± 0.3V
*2-input NAND conversion, **Cell utilization rate: 50 to 70 %
Note2
76720
38360
172
PD65443
µ
PD65444
µµµµµµµµµ
103032
51516
196
128872
64436
216
PD65445
207000
103500
268
PD65446
314104
157052
324
PD65448
440832
220416
380
PD65449
592020
296010
436
PD65451
840768
420384
516
PD65454
1104432
552216
588
PD65456
1626628
813314
708
PD65458
Internal gates*
Number of usable gates**
Number of pads
Note1
Internal gate
Power gate
Input buffer
Output buffer
Output drive capability
Supply voltage
Remark
Density
Delay time
Notes 1.
Including the power supply and GND pins. The number of pins that can be actually used differs depending on the type of package.
2. Differs depending on the number of pin pairs and the occupation rate of the macro.
220 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Line-up and features
Analog Master
Analog Master Line-Up
NEC’s analog master is classified into the following 3 families (refer to the figure below).
• CHS family and CHS-A family for wide application field
• M-CHS family for high voltage
From this wide line-up (3 families 13 masters), user can find the optimum one to realize the user-
desired analog LSI.
PC5204
PC5203
PC5202
PC5201
PC5200
Number of
elements
Function
For high voltage
PC5031
PC5034
PC5032
Voltage
For general purpose For low power consumption
or for driving circuit
PC5024
PC5022
PC5020
PC5023
PC5021
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
M-CHS family
CHS family
CHS-A family
Selection Guide X10679EJHV0SG00 221
Semi-Custom IC
Analog Master
Circuit Scale of Each Family
The scale of the circuit that can be integrated on the analog master differs depending on the model of
each family.
The scale of the circuit that can be integrated shown below is roughly calculated in terms of the
number of circuits where one circuit is equivalent to the general-purpose operational amplifier
µ
PC4558Note 1.
Notes 1. One of the two operational amplifiers in the general-purpose operational amplifier
µ
PC4558 package (8-pin DIP) is counted as one circuit.
2. The number of circuits shown above is a guideline in which only operational amplifiers are integrated, and
does not include operational amplifier peripheral circuits (such as feedback circuits).
When selecting a model, estimate the circuit scale by taking these peripheral circuits into consideration.
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
PC5023(4)
PC5032(12)
PC5031(4)
PC5203(16)
PC5204(24)
PC5200(3)
PC5020(8)
PC5021(12)
PC5022(16)
PC5024(28)
PC5034(16)
PC5201(5)
PC5202(9)
30
20
10
0
CHS family CHS-A family M-CHS family
(Numbers in the parentheses indicate the number of circuits
Notes 2
that can be integrated.)
Number of circuits
equivalent to PC4558(unit: circuits)
µ
One circuit
222 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Analog Master
Available Models
NPN transistor
Note1
PNP transistor
Resistor
Capacitor
High-speed bipolar
14 V
•
High-speed analog signal processing circuit can be created.
• f several 10 MHz • Many pins • Internal driver
• High resistance
Technology
Absolute maximum ratings
Part number
Total number of elements
Features
Item Family Name
1628
260
224
PC5020
2328
368
320
PC5021
3042
476
416
PC5022
727
129
116
PC5023
6152
836
672
PC5024
576
118(13)
105
PC5031
1472
298(18)
280
PC5032
CHS Family CHS-A Family
2252
446(26)
450
1116 1600 2098 468 4560 338 854 1266
28 40 52 14 84 15 40 90
PC5034
Operational amplifiers, comparators, regulators,
switches, timers
Operational amplifiers, comparators,
regulators, switches, super white TEG
Note2
Macro library
=
<
µµµµµµµµ
NPN transistor
PNP transistor
Resistor
Capacitor
High voltage bipolar
44 V
• High voltage: V
CC (MAX.)
= 44 V
• f several MHz
Technology
Absolute maximum ratings
Part number
Total number of elements
Features
Item Family Name
654
105
84
PC5200
1030
163
140
PC5201
1787
283
252
PC5202
3088
484
448
PC5203
4562
710
672
PC5204
M-CHS Family
456 712
1225 2108 3108
915
NPN transistor
PNP transistor
Resistor
Capacitor
654
105
84
PC5200
1030
163
140
PC5201
456 712
915274872
Notes 1. ( ): Products with driver
2. Super white TEG: TEG (Test Element Group) containing analog function macros (operational amplifiers, comparators,
re
g
ulators, switches, drivers, and reset circuits) used as peripherals of microcontroller in one packa
g
e
Operational amplifiers, comparators, regulators, switches
Macro library
=
<
µµµµµ
Selection Guide X10679EJHV0SG00 223
Semi-Custom IC
Mixed Signal ASIC
Mixed Signal ASIC Product Lines (1/2)
NEC offers mixed digital ASICs that employ the BiCMOS technology with a technology rule of 0.6
µ
m
to 0.35
µ
m.
Furthermore, NEC supports the world’s first analog IP cores through the use of a leading-edge 0.35-
µ
m BiCMOS technology, applying its rich analog circuit design know-how.
An extensive line-up of products is available to answer the wide-ranging needs of users.
5-V power supply
for small-scale circuits
3.3-V power supply
for large-scale systems
µ
0.6- m BiCMOS technology
Gate array
+ Analog master slice form
0.35- m BiCMOS
technology
Cell-based form
µ
MA-9 family
( PD681✕✕✕)
µ
MA-8 family
( PD680✕✕)
µ
MA-9 family
Analog IP core
CCD
SENSOR
TIMING
GENERATOR
CONTROL
REF.
CDS AGC
CLAMP
10-bit
ADC
Under
planning
MA-9 Family Analog IP Core
224 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Mixed Signal ASIC
Mixed Signal ASIC Product Lines (2/2)
Mixed Signal ASIC Family Evolution
3.3-V power supply
MA-9 family
(0.35- m BiCMOS)
5-V power supply
MA-8 family
(0.6- m BiCMOS)
(year)
Level of integration, functions
1996 1997 1998 1999 2000 2001 2002
µ
µ
8-bit
150-MHz ADC
8-bit
80-MHz ADC
10-bit
30-MHz ADC
Under planning
Under development
Operating frequency
1996 1997 1998 1999 2000 2001 2002 (year)
MA-9 family (0.35-
µ
m BiCMOS)
Mixed Signal ASIC Analog Core Evolution
Selection Guide X10679EJHV0SG00 225
Semi-Custom IC
Mixed Signal ASIC
MA-8 Family (0.6-
µ
m Mixed Signal ASIC)
Features
The MA-8 Family (
µ
PD680××) consists of top-level mixed signal ASICs that employ the latest high-
cost-performance BiCMOS technology.
This family achieves the integration of mixed digital/analog circuits on a single chip, which will be
pivotal for the development of the multimedia market.
Support of digital/analog mixed circuits
By employing the latest BiCMOS technology, the MA-8 Family realizes the integration of
0.6-
µ
m CMOS gate array and analog ASIC (analog master) on a single chip.
Analog block element configuration prioritizing circuit functions
Analog circuits that mix bipolar transistors and CMOS transistors can be created through
the use of the BiCMOS technology:
High input impedance operational amplifiers
Sample and hold circuits
Analog switches, etc.
Simple design and short development time
The logic block can be easily developed with OPENCAD (NEC’ s original CAE tool).
Furthermore, a short development time can be achieved, which is another advantage
of ASICs.
226 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Mixed Signal ASIC
MA-8 Family (0.6-
µ
m Mixed Signal ASIC)
Chip Configuration
The MA-8 Family is mainly composed of a gate array block and an analog array block. The I/O cells
for the digital/analog interface perform input/output of digital signals between the gate array block and
the analog array block.
Digital circuit
pad
I/O cell
Internal cell
Gate array block
internal cell area
I/O cell
for digital/
analog interface
Analog circuit pad
Analog array block
Analog circuit test
switching pin
Gate array block
internal cell area
Test pins Digital circuit test
switching pin
I/O cell for digital/
analog interface Digital signals
Analog arra y
block internal
cell area
I/O Cells for Digital/Analog Interface
Selection Guide X10679EJHV0SG00 227
Semi-Custom IC
Notes 1. The two operational amplifiers mounted on the package (8-pin DIP) of the
µ
PC4558 general-purpose amplifier are each treated as one circuit.
Moreover , the numbers of conversion circuits indicated in the figure above are merely
reference values for the case when only operational amplifiers are mounted on the
analog array block, and operational amplifier peripheral circuits (such as feedback
circuits) are not included.
In particular when selecting products, estimate the circuit scale considering their
peripheral circuits.
2. Gate utilization rate: 60%
Remark The presence of analog MOS transistors and analog switches on the analog array
block.
• Mounted :
µ
PD68000, 68010, 68070
• Not mounted :
µ
PD68001, 68011, 68031, 68041, 68061
MA-8 Family Master Sizes
Mixed Signal ASIC
MA-8 Family (0.6-
µ
m Mixed Signal ASIC)
Master Size
The MA-8 Family offers eight masters, based on the gate array block size, the analog array block
size, and whether the analog array block has MOS transistors.
The figure below shows the master block size in terms of the number of usable gates and the
number of circuitsNote 1 calculated as general-purpose operational amplifier circuits corresponding to the
µ
PC4558.
Number of usable gates
Note 2
(Unit: Gates)
Number of operational amplifier conversion circuits based
on product equivalent to PC4558 (reference values) (Unit: Circuit)
PD68070
µ
PD68061
µ
PD68041
µ
PD68031
µ
PD68011
µ
PD68001
µ
PD68000
µ
PD68010
µ
µ
30K
10K
3K
1K
0 5 10 15 20 25 30
1 circuit
+ −
− +
228 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Mixed Signal ASIC
MA-8 Family (0.6-
µ
m Mixed Signal ASIC)
Element List
PD68000
µ
68 68 108 84 96 108 128 168
1520 1520 1680 2880 6720 9520 16512 28320
912 912 1008 1728 4032 5712 9907 16992
23 23 31 32 44 53 68 88
912 1264 4614 2016 2016 2304 2736 5017
(Standard) 210 756 336 336 384 456 816
(Large type)
35 126 56 56 64 76 136
200 280 1008 448 448 512 608 1088
(1 kΩ)210 756 336 336 384 456 816
(5 kΩ)420
150
25
150
300 1512 672 672 768 912 1632
25 35 126 56 56 64 76 136
50 70 252 112 112 128 152 272
4024000015
4228000058
4226000048
14 14 36 14 14 14 14 24
PD68001
µ
PD68010
µ
PD68011
µ
PD68031
µ
PD68041
µ
PD68061
µ
PD68070
µ
Part Number
Technology
Maximum supply voltage
High-performance BiCMOS technology
6.0 V (absolute maximum rating)
Number of pads
Logic block
Number of gates
Number of usable gates
Note
Number of logic I/Os
Analog block
Total number of elements
NPN transistor
PNP transistor (Lateral)
Polysilicon resistor
Capacitor (5 pF)
P-ch MOS transistor
Analog SW
P-ch MOS transistor for analog
N-ch MOS transistor for analog
Digital/analog junction block
Digital/analog I/F (Maximum)
Note Gate utilization rate: 60%
Remark The last digit in the part number of MA-8 Family products indicates the presence/absence of analog MOS transistors and
analog switches in the analog array block, as follows:
Last digit = 0 Mounted
Last digit = 1 Not mounted
Selection Guide X10679EJHV0SG00 229
Semi-Custom IC
Mixed Signal ASIC
MA-8 Family (0.6-
µ
m Mixed Signal ASIC)
Basic Specifications
Logic Block
Analog Block
5.0 V ± 0.5 V
Product Name
Technology
Supply V oltage
f
T
= 10 GHz, h
FE
= 80 (all TYP.)
f
T
= 10 MHz, h
FE
= 70 (all TYP.)Transistor
N-ch type, P-ch type for analog circuit
NPN type
PNP type (Lateral)
MOS
Absolute precision: ±20%, relative precision: ±2% (all MAX.)
Absolute precision: ±15%, relative precision: ±2% (all MAX.)
Polysilicon resistor
Note
Capacitor (MOS type)
Note
PD680✕✕
µ
0.6- m BiCMOS technology
µ
Note Values indicated are for reference only. The relative precision applies only to when the pin is positioned in an adjacent location.
PD680✕✕
0.6- m BiCMOS technology
5.0 V ± 0.5 V (I/O block, internal gates)
Product Name
Technology
Supply V oltage
17K gates (usable)
CMOS, TTL
Maximum integration (logic only)
Interface level
190 ps (TYP.)
340 ps (TYP.)
Delay time
2.13 ns (TYP.)
Internal gates
Note 1
Input buffer
Note 2
Output buffer
Note 3
Notes 1. Value assuming 2-input NAND power gate, fanout: 1, and wiring length: 0.6 mm/1 pin pair.
2. Value assuming fanout: 2, wiring length: 0.6 mm/1 pin pair.
3. Value assuming load capacitance: 15 pF, block name: FO01.
µ
µ
230 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Definition of absolute maximum rating terms
Mixed Signal ASIC
MA-8 Family (0.6-
µ
m Mixed Signal ASIC)
Electrical Characteristics
Absolute Maximum Ratings
Item Symbol Conditions Ratings Unit
Supply voltage V
DD
,V
CC
−0.5 to +6.0 V
Input/output voltage
(logic block) V
I
/ V
O
−0.5 to V
DD
+ 0.5 V
Input current
(logic block) I
I
20 mA
Output current
(logic block) I
O
I
OL
= 3 mA 10 mA
I
OL
= 6 mA 15 mA
I
OL
= 9 mA 20 mA
I
OL
= 12 mA 30 mA
I
OL
= 18 mA 40 mA
I
OL
= 24 mA 60 mA
Operating ambient
temperature
T
A
−40 to +85 °C
Storage temperature T
stg
−65 to +150 °C
Caution If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
SymbolItem Meaning
V
DD
Supply voltage The range of voltage that, even if applied to the V
DD
pin, will not cause destruction or lower reliability.
V
I
Input voltage The range of voltage that, even if applied to the input pin, will not cause destruction or lower reliability.
V
O
Output voltage
The range of voltage that, even if applied to the output pin, will not cause destruction or lower reliability.
I
I
Input current
The absolute value of current capacity that, even if applied to the input pin, will not cause latchup to occur.
I
O
Output current The absolute value of DC current capacity that, even if output from or input to the output pin, will not
cause destruction or lower reliability.
T
A
Operating ambient
temperature
Range of ambient temperature in which normal logical operation will occur.
T
stg
Storage
temperature
Range of pin temperature that will not cause destruction or lower reliability when voltage and current are not applied.
Selection Guide X10679EJHV0SG00 231
Semi-Custom IC
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Features
The MA-9 Family (
µ
PD68155) consists of leading-edge mixed signal ASICs that aim for system-
on-a-chip through the use of a leading-edge 0.35-
µ
m BiCMOS technology pioneered by NEC.
While aiming for ultra-high integration for large-scale digital/analog mixed systems in the field
of multimedia, the MA-9 Family realizes high-speed, high-accuracy stable signal processing.
Support of world’s first analog IP core
NEC supports the world’s first analog IP core, using its rich analog circuit design re-
sources.
Mixed signal ASICs aiming for system-on-a-chip
Large-scale mixed signal systems can now be created on a single chip using the cell-
based form.
NEC supports mixed signal cores that include an analog IP core, high-speed ADC and
DAC and other analog cores, digital/analog mixed circuits, etc.
Leading-edge BiCMOS technology
High-speed digital circuits and high-accuracy, sophisticated analog circuits can now be
realized on a single chip by employing NEC’s leading-edge 0.35-
µ
m BiCMOS technology.
Low power consumption
A low power consumption is achieved for LSIs by employing a low-voltage operation
technology (3.3 V)
Flexible mixed signal development environment
NEC’s development environment for cell-based ICs can be used for the internal logic.
For mixed signal cores, NEC supports a development environment using analog arrays
that enables a short turn around time comparable to that of embedded arrays.
Moreover, for circuit blocks, for which analog characteristics particularly matter, NEC
supports a development environment that enables the use of macro cells.
232 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Internal Logic
•User logic
Logic gates, decoder, adder,
multiplexer, counter, shift reg-
ister, etc.
•I/O buffer
•Cores
Analog core
Mixed signal core
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Chip Configuration
The MA-9 Family features a digital/analog mixed circuit configured as a core (mixed signal core) as
its internal logic.
Analog
macro
cells
User logic
Test bus
ADC
core
Test bus
User
logic
Analog
array cells
+
Analog array cells
(analog macro)
Operational amplifier, comparator,
reference voltage source, analog
switches,sample and hold, VCA,
filters, etc.
User logic
(analog circuit operation and
related logic circuits)
Logic gates, decoder, latches,
shift registers, etc.
Mixed signal core
Selection Guide X10679EJHV0SG00 233
Semi-Custom IC
Under planning
Features
•CDS optimum for digital still cameras (correlated double
sampling)
•High-gain AGC for higher sensitivity
•Low-consumption-power-type 10-bit ADC and reference
voltage
•Controller circuit inside DAC for analog circuit
characteristics correction
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Analog IP Cores (1/2)
The MA-9 Family combines NEC’s rich analog circuit design technology and NEC’s analog ASIC
technology cultivated through its analog master products, supporting analog IP cores through the use
of the world’s first leading-edge BiCMOS technology.
In the area of digital/analog mixed circuits, NEC provides already custom designed analog circuits
that require advanced circuit technology as IP cores, thereby reducing the development load of users
and supporting the creation of high-quality mixed signal systems within a short time.
Analog Front-End Cores for CCD Signal Processing
Through the use of bipolar transistors, which have outstanding analog characteristics compared to
CMOS transistors, NEC offers cores with superb low-noise characteristics made possible only by the
use of the BiCMOS technology.
Application Example (Digital Still Camera)
MA-9 family
Analog IP core
TIMING
GENERATOR
CCD
SENSOR
CONTROL
CDS 10-bit
ADC
REF.
CPU DRAM
DSP DCT
AGC
CLAMP
Under
planning
234 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Analog IP Cores (2/2)
High-Speed ADC Cores for Video
The MA-9 Family supports high-speed ADC cores as ASIC cores through the use of the world’s
most advanced 0.35-
µ
m BiCMOS technology.
NEC has realized high-speed ADC, which is difficult to realize with a CMOS technology, through
optimum design using CMOS transistors and bipolar transistors that can created only by employing
the BiCMOS technology.
Moreover, by offering these ADCs as cores, NEC makes these products available for a wide range
of applications.
For video
8-bit 80-MHz
Under development
Application Example (LDC Display Video Signal Input)
By combining an analog circuit and a high-speed ADC core on a single chip, it is possible to realize
high-precision analog/digital conversion by avoiding the attenuation and degradation of high-speed
analog signals caused by the capacitance load of the package I/O pins of analog LSIs and high-speed
ADC LSIs externally connected to conventional LSIs and the capacitance load of the printed wiring
board.
Moreover, the reduction of these load capacitances enables the simplification of the output stage of
the analog circuit, thereby making it relatively easy to achieve high bandwidth analog circuits and
enabling the reduction of the power consumption of the LSI.
Analog
RGB input MA-9 family
R
G
B
H
V
Digital
processing
Resolution
judgment
Interface
Controller
Vertical
sync driver
Horizontal
sync driver
Video
amplifier 8-bit
ADC
Synchronization
separation
Selection Guide X10679EJHV0SG00 235
Semi-Custom IC
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Analog Core
ADC Core
NEC provides both video and general-purpose ADC cores.
DAC Core
NEC provides both video and general-purpose DAC cores.
For video
General-
purpose
10-bit 30 MHz
8-bit 30 MHz
10-bit 100 kHz
8-bit 100 kHz
V
DD
= 3.3 V (TYP) , I
DD
= 7 mA (TYP)
V
DD
= 3.3 V (TYP) , I
DD
= 5 mA (TYP)
V
DD
= 3.3 V (TYP) , I
DD
= 20 A (TYP)
µ
V
DD
= 3.3 V (TYP) , I
DD
= 40 A (TYP)
µ
Differential linearity error : ±1.0 LSB (MAX)
Integral linearity error : ±2.0 LSB (MAX)
Analog output voltage : 1.2 to 2.2 V
Differential linearity error : ±0.5 LSB (MAX)
Integral linearity error : ±1.5 LSB (MAX)
Analog output voltage : 1.4 to 2.4 V
Differential linearity error : ±1.0 LSB (MAX)
Integral linearity error : ±1.0 LSB (MAX)
Analog output voltage : 0 to 3.2 V
Differential linearity error : ±1.0 LSB (MAX)
Integral linearity error : ±1.0 LSB (MAX)
Analog output voltage : 0 to 3.2 V
For video
General-
purpose
10-bit 30 MHz
10-bit 15 MHz
10-bit 100 kHz
8-bit 100 kHz
V
DD
= 3.3 V (TYP) , I
DD
= 60 mA (TYP)
V
DD
= 3.3 V (TYP) , I
DD
= 30 mA (TYP)
V
DD
= 3.3 V (TYP) , I
DD
= 1.5 mA (TYP)
V
DD
= 3.3 V (TYP) , I
DD
= 0.6 mA (TYP)
Differential linearity error
: ±1.0 LSB (MAX)
Integral linearity error : ±2.0 LSB (MAX)
Analog input range : 0.8 to 1.8 V
Differential linearity error
: ±1.0 LSB (MAX)
Integral linearity error : ±2.0 LSB (MAX)
Analog input range : 0.8 to 1.8 V
Differential linearity error
: ±1.0 LSB (MAX)
Integral linearity error : ±2.0 LSB (MAX)
Analog input range : 0.3 to 3.0 V
Differential linearity error
: ±1.0 LSB (MAX)
Integral linearity error : ±2.0 LSB (MAX)
Analog input range : 0.3 to 3.0 V
236 Selection Guide X10679EJHV0SG00
Semi-Custom IC
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Basic Specifications
Logic Block
Product Name
Technology
Supply V oltage 3.3 V ±0.3 V (I/O block, internal gates)
Maximum integration (logic only) 1.7 million gates (usable)
Interface level LVTTL
Internal gates
Note 1
114 ps (TYP)
Input buffer
Note 2
Delay time 169 ps (TYP)
Output buffer
Note 3
864 ps (TYP)
PD681✕✕
µ
0.35- m BiCMOS technology
µ
Notes 1. Value assuming 2-input NAND power gate, fanout 2, and standard wiring length.
2. Value assuming fanout 2 and standard wiring length.
3. Value assuming load capacitance 15 pF, I
OL
= 18 mA.
Analog Block
Note Values indicated are for reference only. The relative precision applies only to when the pin is positioned in an adjacent location.
Product Name
Technology 0.35- m BiCMOS technology
Supply V oltage 3.3 V ±0.3 V
NPN type
PNP type (Vertical type)
f
T
= 10 GHz, h
FE
= 70 (all TYP)
Transistors f
T
= 2 GHz, h
FE
= 30 (all TYP)
MOS N-ch type, P-ch type for analog circuit
Polysilicon resistor
Note
Absolute precision: ±20%, relative precision: ±2%
Capacitor (MIM type)
Note
Absolute precision: ±20%, relative precision: ±2%
µ
PD681✕✕
µ
Selection Guide X10679EJHV0SG00 237
Semi-Custom IC
Definition of absolute maximum rating terms
Mixed Signal ASIC
MA-9 Family (0.35-
µ
m Mixed Signal ASIC) New Products
Electrical Characteristics
Absolute Maximum Ratings
Item Symbol Conditions Rating Unit
Supply voltage V
DD
3.3-V −0.5 to +4.6 V
I/O voltage V
I
/V
O
LVTTL buffer V
I
/V
O
< V
DD
+ 0.5 V −0.5 to +4.6 V
Output current I
O
I
OL
= 1 mA 3 mA
I
OL
= 2 mA 7 mA
I
OL
= 3 mA 10 mA
I
OL
= 6 mA 20 mA
I
OL
= 9 mA 30 mA
I
OL
= 12 mA 40 mA
I
OL
= 18 mA 60 mA
I
OL
= 24 mA 75 mA
Operating ambient
temperature T
A
−40 to +85 °C
Storage temperature T
stg
−65 to +150 °C
Caution If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of the product may
be impaired. The absolute maximum ratings are values that may physically damage the product(s). Be sure to use
the product(s) within the ratings.
Symbol MeaningItem
V
DD
The range of voltage that, even if applied to the V
DD
pin, will not cause destruction or lower reliability. Supply voltage
V
I
The range of voltage that, even if applied to the input pin, will not cause destruction or lower reliability. Input voltage
V
O
The range of voltage that, even if applied to the output pin, will not cause destruction or lower reliability.
Output voltage
I
I
The absolute value of current capacity that, even if applied to the input pin, will not cause latchup to occur.
Input current
I
O
The absolute value of DC current capacity that, even if output from or input to the output pin, will not
cause destruction or lower reliability.
Output current
T
A
Range of ambient temperature in which normal logical operation will occur.
Operating ambient
temperature
T
stg
Range of pin temperature that will not cause destruction or lower reliability when voltage and current are not applied.
Storage
temperature
238 Selection Guide X10679EJHV0SG00
[MEMO]
Selection Guide X10679EJHV0SG00 239
DSP................................................................................... 240
CCD Linear Image Sensor ............................................. 243
Communication IC.......................................................... 245
Mass Storage IC ............................................................. 250
Global Positioning System IC ...................................... 251
Display IC ........................................................................ 251
Intelligent Power MOS LSI............................................ 254
Power Switch for USB Application.............................. 255
Image IC........................................................................... 255
MPEG IC........................................................................... 256
Audio IC........................................................................... 257
TV IC................................................................................. 259
Multisync Monitor IC...................................................... 262
Digital Image IC .............................................................. 263
On-Screen Character Display IC.................................. 265
Video Camera IC............................................................. 265
Remote Control IC.......................................................... 266
Clock IC ........................................................................... 266
Rotary Encoder IC.......................................................... 266
A/D Converter IC ............................................................ 267
D/A Converter IC............................................................. 267
Line Driver Receiver IC ................................................. 267
Particular Purpose IC
4
240 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Internal memory
(words × bits)
DSP
Instruction cycle (ns)
Data type
Multiplier precision (bits)
ALU precision (bits)
Program ROM
Program RAM
Data ROM
Data RAM
External memory (words × bits)
Power supply
Power consumption (TYP.)
Package
16.7
fixed point decimal
40 + 16 × 16 → 40
40
–
4K × 32
–
6K × 16
32K ×16 (data)
3.0 V
1.1 mA/MHz (@3.0 V)
• 100-pin TQFP
30
fixed point decimal
40 + 16 × 16 → 40
40
–
1.5K × 32
–
4K × 16
48K×32 (program)
96K×16 (data)
5.0 V
4.2 mA/MHz (@5.0 V)
• 160-pin QFP
µ
PD77016
µ
PD77018A
µ
PD77019
µ
PD77019-013
16.7
fixed point decimal
40 + 16 × 16 → 40
40
24K × 32
256 × 32
24K × 16
6K × 16
32K×16 (data)
3.0 V
1.0 mA/MHz (@3.0 V)
• 100-pin TQFP
• 116-pin FBGA
16.7
fixed point decimal
40 + 16 × 16 → 40
40
24K × 32
4K × 32
24K × 16
6K × 16
32K×16 (data)
3.0 V
1.1 mA/MHz (@3.0 V)
• 100-pin TQFP
13.3
fixed point decimal
40 + 16 × 16 → 40
40
32K × 32
1K × 32
32K × 16
6K × 16
–
DSP core: 2.5 V
I/O pins: 3.0 V
0.4 mA/MHz (@2.0 V)
0.5 mA/MHz (@2.5 V)
• 80-pin TQFP
• 80-pin FBGA
Instruction cycle (ns)
Data type
Multiplier precision (bits)
ALU precision (bits)
Program ROM
Program RAM
Data ROM
Data RAM
External memory (words × bits)
Power supply
Power consumption (TYP.)
Package
µ
PD77110
µ
PD77111
µ
PD77112
Internal memory
(words × bits)
13.3
fixed point decimal
40 + 16 × 16 → 40
40
–
35.5K × 32
–
48K × 16
64K×16 (data)
DSP core: 2.5 V
I/O pins: 3.0 V
0.5 mA/MHz (@2.5 V)
• 100-pin TQFP
13.3
fixed point decimal
40 + 16 × 16 → 40
40
32K × 32
1K × 32
32K × 16
6K × 16
32K×16 (data)
DSP core: 2.5 V
I/O pins: 3.0 V
0.4 mA/MHz (@2.0 V)
0.5 mA/MHz (@2.5 V)
• 100-pin TQFP
Particular Purpose IC
Selection Guide X10679EJHV0SG00 241
DSP
■DSP Development Plan
3.3V,60MIPS,ROM
PD77019
µ
PD77016
µ
PD77015/17/18
µ
5V,33MIPS,RAM
3V,33MIPS,ROM
3.3V,60MIPS,ROM
high capacity instruction RAM
PD77018A
µ
PD77116*
µ
2.5V,80MIPS,RAM
PD77113*/114*
µ
PD77110
µ
PD77111/112
µ
2.5V,75MIPS,ROM
lower power consumption
2.5V,80MIPS,core
3V,60MIPS,core
High performance
(high speed,low power consumption)
*: under development
**: under planning
320MIPS DSP
PD77xxxx*
µ
over 1000MIPS DSP
PD77xxxx**
µ
PD7721x**
µ
2.5V,75MIPS,ROM
capacity extended RAM and ROM
2.5V,75MIPS,RAM
PD77111 family
µ
NASPXK2 NA77113*
NA77111
NASPXK3
∼
1995 1996 1997 1998 1999 2000
∼
SOC (System on a Chip)
NA7721x**
DSP core*
1.8V,200MIPS,core
Low power
consumption
242 Selection Guide X10679EJHV0SG00
Particular Purpose IC
DSP
Image sampleJPEG
H.263
G.722
G.723.1
G.723.1 ANNEX A/C
G.726 (ADPCM)
G.728 (LDCELP)
G.729
G.729 ANNEX A/B
MPEG-4/Speech (CELP)
Echo canceller (for hands-free operation)
Speech recognition Small vocabulary
(Japanese) 1000 words
µ
PD77016 family
■DSP Middleware
Field Middleware
Speech
Recognition –
Remark : Developed, : Under development, : Under planning
■DSP Middleware Development Plan
Communication Multi-media
Human Interface
W-CDMA
Echo canceller
FAX CODEC
(JBI/ MH)
Speech CODEC
G.722, G.723.1,
G.726, G.728,
G.729
JPEG
MPEG-4/Speech(CELP)
H.263
Speech recognition
(small vocabulary,
Japanese)
MPEG-4 video
Under Developed 1999 After 2000
After 2000
1999
Under Developed
Particular Purpose IC
Selection Guide X10679EJHV0SG00 243
Pixel number
Resolution (dpi/sheet)
Pixel size (
µ
m)
Sensitivity (TYP.) (V/Ix•s)
Data rate (MAX.) (MHz)
Readout method
Output (ch)
S/H circuit
Package
Features
Part number
CCD Linear Image Sensor
■Monochrome
2088
200/B4
14 × 14
90
2
single-sided
–
22-pin plastic DIP
(400 mil)
5 V power supply
µ
PD3753
µ
PD3739
2660
300/A4
11 × 11
70
5
22-pin plastic DIP
(400 mil)
Low image lag
5000
400/A3
7 × 7
9.0
40
(20 × 2)
2 (in or out of phase)
–
22-pin ceramic DIP
(CERDIP) (400 mil)
µ
PD35H71A pin compatible
dual-sided
1
Light source of the Sensitivity: Daylight color fluorescent lamp
Pixel number
Resolution (dpi/sheet)
Pixel size (
µ
m) R
G
B
Line spacing
Data rate (MAX.) (MHz)
Readout method
Output (ch)
Clamp pulse generator
Package
Features
Part number 2700 × 3
300/A4
8 × 8
14.6
13.3
8.00
4
(32
µ
m)
4
1
22-pin plastic DIP
(400 mil)
On-chip multiplexer
µ
PD3794
µ
PD3797
µ
PD3799
3
single-sided
–
32-pin plastic DIP
(glass cap) (400 mil)
On-chip S/H circuit
4
32-pin plastic DIP
(plastic cap) (400 mil)
upgraded from
µ
PD3797
5300 × 3
600/A4
7 × 7
11.2
10.2
6.10
4
(28
µ
m)
3
Sensitivity
(TYP.) (V/Ix•s)
■Color
µ
PD3734A
Light source of the Sensitivity: 3200K halogen lamp + C-500S (infrared cut filter, t = 1 mm)
Pixel number
Resolution (dpi/sheet)
Pixel size (
µ
m) R
G
B
Line spacing
Data rate (MAX.) (MHz)
Readout method
Output (ch)
Clamp pulse generator
Package
Features
Part number 10600 × 3
1200/A4
7 × 7
9.70
8.80
5.30
10
(70
µ
m)
2
single-sided
3
36-pin ceramic DIP
(600 mil)
Vsat: 4.0 V (MIN.),
15 V power supply,
for professional color
image scanners
µ
PD3719
µ
PD3729
µ
PD3728
5000 × 3
400/A3
6.20
5.40
6.80
30
(15 × 2)
–
24-pin ceramic DIP
(400 mil)
7300 × 3
600/A3
5.60
5.10
6.40
40
(20 × 2)
36-pin ceramic DIP
(600 mil)
10 × 10
4
(40
µ
m)
dual-sided
6 (2-output/color (in phase))
High speed,
for digital copiers
Sensitivity
(TYP.) (V/Ix•s)
244 Selection Guide X10679EJHV0SG00
Particular Purpose IC
■CCD Linear Image Sensor System Block Diagram
CCD Linear Image Sensor
Object
Lens
Mirror
Light Source
OSC
ADC
Analog
Circuit
R
G
B
Shading
Data
SRAM
DC/AC inverter
ASIC
PC
Interface
CPU
Detect
Switches
Stepper
Motor
Stepper
Motor
Driver
CCD
Controller
Analog
Circuit
Controller
Image
Processing
Register
Register
Motor
Controller
I/O
CCD
Particular Purpose IC
Selection Guide X10679EJHV0SG00 245
Package
• 40-pin DIP
• 52-pin QFP
• 52-pin QFJ
• 44-pin TQFP
• 40-pin DIP
• 44-pin TQFP
• 52-pin QFP
• 40-pin DIP
• 44-pin QFP
• 44-pin QFJ
• 44-pin TQFP
• 68-pin QFJ
• 80-pin QFP
• 64-pin shrink DIP
• 68-pin QFJ
• 80-pin QFP
• 64-pin shrink DIP
• 68-pin QFJ
• 80-pin QFP
• 64-pin QFP
• 20-pin DIP
• 16-pin SOP
• 16-pin DIP
• 16-pin SOP
Communication IC
■Communication LSI
µ
PD72001-11
µ
PD72002-11
Part number Function
Multi-protocol serial controller
Multi-protocol serial controller
HDLC controller
Packet communication control
LSI (X.25 communication
control)
LAP-D protocol processing
LSI
S interface transceiver for
NT or TE
S interface transceiver for NT
IE BusTM controller/driver
Features
Allows communication in ASYNC, COP, and BOP mode (2 ch)
µ
PD72001-11: 5 V Operation
µ
PD72001-A8: 3.3 V Operation
Allows communication in ASYNC, COP, and BOP mode (1 ch)
HDLC frame control, link/separation are possible, internal DMA
controller
8 Mbps operation
Conforms ITU-T recommendation X.25
(LAP-B ’84 ver)
Supports LAP-D protocol of ITU-T recommendation
4-wire full duplexed communication (basic access)
Conforms to ITU-T recommendation I430
Conforms to ITU-T recommendation I430
Transmit data buffer: 4 bytes
Receive data buffer: 20 bytes
Transmit data buffer: 33 bytes
Receive data buffer: 40 bytes
µ
PD72001-A8
µ
PD72103A
µ
PD6708
µ
PD72042A
µ
PD72042B
µ
PD72107
µ
PD72305
µ
PD98201
µ
PD98203
■ISDN Terminal Adapter
RAM
ISDN
subscriber
line
PD98201
µ
PD472X
Existence
terminal
µ
PD72001
ROM
µ
CPU
PD72305
µ
S-IFC : "S" Interface
Controller
MPSC : Multi-Protocol
Serial Controller
RS-232-C
driver/
receiver
MPSC
S-IFC
LAP-D
246 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Communication IC
■Chip Set for ATM
Function
ATM SAR Chip
ATM Advanced SONET
Framer
ATM Integrated SAR
controller
6 port 25M ATM PHY
ATM Light SAR Controller
1.2 Gbps ATM Switch
ATM QUAD SONET
FRAMER
µ
PD98409
Features
• Upward compatible with
µ
PD98401
• Conforms to ATM Forum recommendations
• Implements AAL-5 SAR sublayer and ATM layer functions
• Supports TC sublayer in PHY layer
• Implements SONET STS-3c/SDH STM-1 (155 Mbps) framer function
• Integrated Clock recovery/Clock synthesis function
• UTOPIA Level 2 interface
• SONET STS-3c/SDH STM-1 (155M bps), Framer and SAR controller
with ABR function in a single-chip
• Support both PCI bus and generic bus
• 25.6 Mbps ATM PHY (PMD & TC) function for 6 circuits
• UTOPIA Level 2 interface
• Implements AAL-5 SAR sublayer and ATM layer function
• Supports PCI bus interface
• MPEG packet transfer engine
• ATM switching function in a single-chip
• 1.2 Gbps with non blocking
• ABR traffic control
• Implements 4 ports SONET STS-3c/SDH-1 (155M bps) framer function
on chip
Part number
µ
PD98401A
µ
PD98408
µ
PD98404
µ
PD98405
µ
PD98410
Package
• 208-pin QFP
(Fine Pitch)
• 144-pin QFP
(Fine Pitch)
• 304-pin QFP
(Fine Pitch)
• 208-pin QFP
(Fine Pitch)
• 240-pin QFP
(Fine Pitch)
• 580-pin BGA
• 240-pin QFP
(Fine Pitch)
µ
PD98411
■PCI Bus Supporting ATM-NIC
SRAM
Bus
Interface
32-bit PCI, 32-bit general purpose
For WS and Server
For PC
SRAM
64/32-bit PCI,
32-bit general purpose
32-bit PCI
E/O
E/O
E/O
PD98401A
(S15)
µ
PD98404
(P30)
µ
PD98405
(S20)
µ
PD98409
(S40C)
µ
PD98404
(P30)
µ
Particular Purpose IC
Selection Guide X10679EJHV0SG00 247
Communication IC
■ATM Switch
Desktop
Network
25M
NIC
155M
SRAM
155M
Backbone
Network
CPU
PD98404
(P30)
PD98408
(T20)
PD98408
(T20)
PD98408
(T20)
µ
µ
µ
µ
PD98410
(X10) PD98411
(P40)
µµ
■Ethernet LSI
Function Features
• CAM (64-bit × 8K Entry)
• Implements three search modes
• 8-port 10/100 Mbps Ethernet MAC
• MII and 10 Mbps serial interface
Part number
µ
PD98421
Package
• 240-pin QFP
(Fine Pitch)
• 240-pin FPBGATM
• 352-pin BGA
High Speed Address Search
Engine
8-port 10/100 Mbps Ethernet
Controller
µ
PD98431
■Standard USB
FunctionPart number Features
• All USB HUB function in a single-chip
• Compliance with USB Specification 1.0
• Supports Self-powered and Bus-powered
• 4 or 5 down-port selectable
• Up-grade LSI of
µ
PD72011
• Compliant with USB specification 1.1
• Built-in Mask-ROM for Generic HUB Descriptor
Selectable to use Standard or User-Defined
µ
PD72011
Package
• 42-pin SDIP
• 44-pin QFP
• 42-pin SDIP
• 44-pin QFP
USB Hub Controller
µ
PD72012
248 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Communication IC
★: Under development
■LSI for IEEE1394
Function Features
• Compliant with P1394a draft2.0
• Selectable for 1-port, 2-port, 3-port
• Data Rate: 100/200/400 Mbps
• Compliant with MD8405 (FFM)
• Compliant with Open HCI for IEEE1394-1995 1.0
• Compliant with P1394a draft2.0
• Data Rate: 100/200/400 Mbps
• Supports PCI-Bus/Cardbus
• Integrated OHCI LINK and .aPHY in a single chip
3-port:
µ
PD72870, 1-port:
µ
PD72871
Part number
µ
PD72850
Package
• 80-pin TQFP
• 100-pin TQFP
• 160-pin LQFP
• 192-pin FPBGA
IEEE1394 400M PHY
µ
PD72861
µ
PD72870/71★
IEEE1394 OHCI Host
Controller
IEEE1394 1-chip OHCI
Host Controller
★: Under development
■Power Switch for USB Application
Internal
circuit Input
voltage (V)
µ
PD16855A
µ
PD16855B
µ
PD16855C
µ
PD16855D
µ
PD16874★
µ
PD16875★
Function
Part number Package
Output
current (A) Main
application
Pch High-side switch
for USB
(High active)
Pch High-side switch
for USB
(Low active)
Pch High-side switch
for USB
High active, instant
switch off
Pch High-side switch
for USB
Low active, instant
switch off
Pch High-side switch
for USB
(Low active)
Pch High-side switch
for USB
(Low active)
2
4.0 to 5.5 0.6 to 1.25
• 8-pin SOP
(225 mil)
Note PC
CRT monitor
LCD monitor
0.5
Over current
detect (A)
Circuit
current (mA)
1.5
CRT monitor
LCD monitor
Key board
HUB BOX
• 8-pin DIP
(300 mil)
• 8-pin SOP
(225 mil)
• 8-pin SOP
(225 mil)
• 8-pin SOP
(225 mil)
• 16-pin DIP
(300 mil)
• 16-pin SOP
(300 mil)
• 8-pin DiP
(300 mil)
• 8-pin SOP
(225 mil)
()
()
2.5
0.1
2
2
2
4
2
Particular Purpose IC
Selection Guide X10679EJHV0SG00 249
• 48-pin SSOP
Communication IC
BS-SLIC
µ
PD9611
CODEC
(PCM CODEC)
programable control (DGS, power-down, A/
µ
-law),
4-ch PCM CODEC, Single 5 V power supply
■Analog Line Card LSI
• 48-pin SSOP
µ
PC7073 • 48-pin SSOP
Digital CODEC
µ
PD9903 • Terminal impedance and Hybrid balance network
can be selected by combining
µ
PC7073
• 3 relay drivers
PCM
highway
Over
voltage
protect
(O)
Ringing
(R)
Testing
(T)
Battery
feed
(B)
Supervision
(S)
Hybrid
(H)
Codec
(C)
CODEC
Telephone
PCM
highway
Over
voltage
protect
(O)
Ringing
(R)
Testing
(T)
Battery
feed
(B)
Supervision
(S)
Hybrid
(H)
Codec
(C)
Telephone PC7073
µ
PD9903
µ
250 Selection Guide X10679EJHV0SG00
Particular Purpose IC
RF amplifier, error amplifier for 24X speed
CD-ROM
RF amplifier, error amplifier for 32X speed CD-ROM
Supports CD-RW
Lens error amplifier
Supports voltage output type pickup
Power management
Digital Servo, Data Processor, CD-ROM Decoder,
Host I/F on 1 chip
Supports 24X speed operation
Automatic adjustment function
Wide capture range
High speed CAV audio playback
Supports PIO mode 4, DMA mode 2 (Enhanced IDE/
ATAPI)
Power management
Digital audio interface output
Digital Servo, Data Processor, AudioDAC, CD-ROM
Decoder, Host I/F, 1MbitSRAM on 1 chip
Supports 32X speed operation
Automatic adjustment function with
µ
PC2576
Wide capture range by analog PLL
High speed CAV audio playback
Supports PIO mode 4, DMA mode 2 (Enhanced IDE/
ATAPI)
Supports UltraDMA mode 2
Supports CD TEXT
Power management
µ
PC2575
µ
PC2576
µ
PD63724A
µ
PD63725
RF amplifier for 24X
speed CD-ROM
RF amplifier for 32X
speed CD-ROM
1 chip CD-ROM
controller
• 36-pin SSOP
• 38-pin SSOP
• 160-pin LQFP
• 176-pin QFP
Mass Storage IC
Function Features PackagePart number
Particular Purpose IC
Selection Guide X10679EJHV0SG00 251
µ
PC2756
µ
PC2753
µ
PB1005
■RF IC for GPS receiver
Global Positioning System IC
Package
• 6-pin mini-mold
• 6-pin super mini-mold
• 20-pin plastic SSOP
(225 mil)
• 36-pin plastic QFN
14
60 to 79
72 to 92
Type VCC
(V) ICC
(mA) CG
(dB)
6
6.5
45
2.7 to 3.3
2.7 to 3.3
2.7 to 3.3
Function
(frequency unit: MHz)
Part number
RF downconverter with osc. Tr
IF downconverter with gain control
amplifier
RF/IF downconverter + PLL
synthesizer
TCXO = 16.368/1stIF = 61.380/
2ndIF = 4.092
General purpose
wideband separate IC
Clock frequency
specific 1 chip IC
Typical performance. (TA = +25°C, VCC = 3.0 V)
∗: Three direction lead
Static
Static
Dynamic
Static
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
39
21
20
47
40
64
64
40
32
32
µ
PD6320
µ
PD6321
µ
PD6323
µ
PD6323B
µ
PD6340
µ
PD6700
µ
PD16304
µ
PD16306
µ
PD16306A
µ
PD16310
µ
PD16326
µ
PD16326A
Number of
outputs Withstand
voltage (V)
DrivesPart number Main applications
Output type
Output
current (mA)
■Fluorescent indicator panel (FIP) driver IC
• 52-pin QFP
• 28-pin DIP
• 52-pin QFP
• 56-pin QFP
• 80-pin QFP∗
•
100-pin QFP
•
100-pin QFP
• 80-pin QFP∗
• 44-pin QFP
• 44-pin QFP
CMOS
Pch-O.D
NPN+Nch
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
1
5
25
1
20
50
25
50
20
20
18
25
40
80
18
200
80
80
80
130
150
Car stereo
Automotive
ECR, PPC
Car stereo
Graphic FIP module
Package
■Fluorescent indicator panel (FIP) controller/driver IC
Grids
Part number
µ
PD16311
µ
PD16312
µ
PD16313
µ
PD16314
µ
PD16315★
Segment
Segment
Segment
DOT character
Segment
VCR
VCR
VCR
OA, FA
VCR
Drives Duty
(Max.)
1/16
1/11
1/11
1/24
1/14
Number of outputs
Segments
12
11
11
80
16
16
11
11
24
14
Remarks
Main
application
Package
Number of
characters∗
192 segments
121 segments
121 segments
24 × 2 characters
224 segments
5/35
5/35
5/35
5/50
5/35
Logic voltage (V)/
Drive voltage (V)
•
52-pin QFP
•
44-pin QFP
•
44-pin QFP
•
144-pin QFP
•
44-pin QFP
Included
key scan
(
µ
PD16312
mirror)
Included
key scan
∗: At maximum duty ★: Under development
Included
key scan
Display IC
252 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Included
key scan
µ
PD7225
µ
PD16430A
µ
PD16431A
µ
PD16432B
µ
PD16434
µ
PD16435
µ
PD16435A
µ
PD16435B
µ
PD16670
µ
PD16675A
• 52-pin QFP
• 56-pin QFP
128 segments
240 segments
224 segments
12 × 2 characters
+ 60 pictographs
8 × 2 characters
119 × 71 dots
+ 119 × 2
pictographs
12 × 4 characters
+ 60 pictographs
128 × 32 dots
+ 128 × 2
pictographs
Display IC
1/4
1/15
1/16
1/73
2.7 to 5.5/
2.7 to 5.5
3.5 to 6/
3.5 to 14
2.7 to 5.5/
2.7 to 6.5
2.7 to 5.5/12
2.7 to 5.5/12
2.7 to 5.5/10∗2
2.7 to 3.6/12∗2
2.7 to 5.5/10∗2
Part number PackageDrives Duty
(MAX.) Segments Commons
Number of outputs
32
60
56
42
119
60
128
4
4
4
16
73
33
34
Number of
characters∗1Logic voltage (V)/
Drive voltage (V) Main
application Remarks
■Liquid crystal display (LCD) controller/driver IC
Car audio
∗1: At maximum duty
∗2: Internal DC/DC Converter
DOT character
Segment
DOT character
Graphic
Graphic
1/36
1/53
Mobile
phone
Mobile
phone
Pager
Included
DC/DC
Converter
• Included
DC/DC
Converter
• Included
Japanese
Kanji ROM
Included
DC/DC
Converter
Included
DC/DC
Converter
• 80-pin QFP
• 100-pin
QFP
• 80-pin QFP
• TCP
• CHIP
• CHIP
2.7 to 3.6/12∗2
100 × 51 dots
+ 100 × 2
pictographs
100 53
61
µ
PD16676
µ
PD16680
1/16
1/32 16 61 × 16 dots 2.7 to 5.5/12
1/65 132 × 64 dots
+ 132 pictographs
132 65 2.4 to 5.5/12 ∗2• CHIP
• TCP
µ
PD16681
µ
PD16682
1/52 2.45 to 4.0/12∗2
96 × 52 dots
+ 96 pictographs
(8 × 4 Japanese
Kanji character)
96 52
• 80-pin QFP
Particular Purpose IC
Selection Guide X10679EJHV0SG00 253
■Liquid crystal display (LCD) driver IC
Static
TFT (source) Analog
DrivesPart number Main applicationsPackage
Number of
outputs
Display IC
µ
PD6320
µ
PD6321
µ
PD16448A
µ
PD16780★
µ
PD16633B
µ
PD16634A
µ
PD16638A
µ
PD16640A
µ
PD16640B
µ
PD16640C
µ
PD16644
µ
PD16647★
µ
PD16710
µ
PD16715
µ
PD16715A★
µ
PD16732
µ
PD16732A
µ
PD16732B
µ
PD16740
µ
PD16750
µ
PD16650
µ
PD16652★
µ
PD16654
µ
PD16655
µ
PD16661A
µ
PD16666A
µ
PD16662
µ
PD16667
µ
PD16663
µ
PD16664★
★: Under development
Car stereo
LCD-TV
LCD-TV
XGA
SVGA
SVGA/XGA
SVGA/XGA
XGA
SVGA
SVGA/XGA
XGA/SXGA
XGA/SXGA
XGA/SXGA
XGA –
–
–
–
PDA (1/8 VGA to VGA)
PDA (1/8 VGA to VGA)
PDA (1/8 VGA to 1/2 VGA)
PDA (1/8 VGA to 1/2 VGA)
PDA (1/8 VGA to 1/2 VGA)
PDA (144 × 128 to 416 ×
320 dots)
18
5.0
5.0
10.5
8.5
8.5
3.3/5.0
5.0
3.3/5.0
12.0
13.5
8.5
8.5
8.5
40
31
40
31
5
36
5
36
5
5
39
240
288/300
312
300
300/309
300/309
384
402
300/309
384
384
384
384
120/128
192/200
150/154
240
160
240
240
160
240
208
• 52-pin QFP
Logic
voltage (V)
5.0
3.3
3.3/5.0
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3/5.0
3.3
3.3
3.3
3.3
5.0
3.3
5.0
3.3
3.3
Withstand
voltage (V)
• TCP
TFT
(source) 64 gray scale
TFT
(gate)
TFT (source) 256 gray scale
STN (column) 4 gray scale
STN (row)
STN (column) 4 gray scale
STN (row)
STN (column) 16 gray scale
STN (column) 4 gray scale
∗: Three direction lead
Part number
µ
PD16305
µ
PD16306B
µ
PD16306A
µ
PD16310
µ
PD16327
µ
PD16331
µ
PD16334
µ
PD16335
µ
PD16337
µ
PD16364★
CMOS
Withstand voltage (V) Output current (mA) Output type Package
200
80
80
80
100
100
80
80
150
60
400
50
25
50
40
150
50
50
40
25
• 80-pin QFP ∗
• 100-pin QFP
• 100-pin QFP
• 100-pin QFP
• 80-pin QFP ∗
• 100-pin QFP
• 100-pin QFP
• 80-pin QFP
• 80-pin QFP
• For COB
• For COB
• 100-pin QFP
• TCP
Number of outputs
40
64
64
40
64
40
96
96
64
160
■Plasma display, EL display driver IC
AC-PDP column
★: Under development
AC-PDP/EL
Drives
AC-PDP row
AC-PDP/EL column
254 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Display IC
■Other driver IC
NPN-O.C: NPN open-collector output (sink driver)
µ
PD6320
µ
PD6321
µ
PD6345
Car stereo (LED)
Thermal head, LED, solenoid
• 52-pin QFP
• 16-pin DIP
• 16-pin SOP
Main applications
Number of
outputs Withstand
voltage (V) Output
current (mA) PackageOutput type
Part number
NPN+Nch
NPN-O.C
4 × 4
8
18
40
20
100
• 16-pin SOP
• 20-pin SOP
• 20-pin SSOP
• 30-pin SSOP
• 30-pin SSOP
• 26-pin TSSOP
• 38-pin SSOP
• 24-pin SOP
(375 mil)
• 30-pin SSOP
(0.8 mm pitch)
• 38-pin SSOP
• 30-pin SSOP
• 24-pin TSSOP
Camera, DSC
FDD (2 aspects
excitation)
FDD (1-2 aspects
excitation)
FDD (2 aspects
excitation)
FDD (1-2 aspects
excitation)
FDD (2 aspects
excitation)
camcorder
4 ch-H bridge
camcorder
4 ch-H bridge
camcorder
microstep drive
CD-ROM PWM
drive
CD-ROM/DVD
actuator drive
CD-ROM PWM
drive
CD-ROM PWM
drive
DVD-RAM
CD-ROM PWM
drive
camcoder
4-ch-H bridge
±0.5
±1.0
±0.5
±0.38
±0.45
±0.31
±0.415
±0.38
±0.3
±0.3
±0.15
±1.3 peak
±1.0 peak
±1.9 peak
±2.0 peak
±1.0 peak
±1.5 peak
±0.25
Intelligent Power MOS LSI
µ
PD16804
µ
PD16805
µ
PD16823
µ
PD16803
µ
PD16808
µ
PD16813
µ
PD16814
µ
PD16818
µ
PD16833
µ
PD16833A
µ
PD16835
µ
PD16836
µ
PD16837
µ
PD16853B
µ
PD16856
µ
PD16857
µ
PD16858B
µ
PD16858C
µ
PD16877
Control part Output part
Recommended operation
voltage range (V)
FunctionPart number Package
Output current (A)
DC motor driver
stepping motor driver
3 aspects blush-less
DC motor driver
stepping motor driver
3 aspects blush-less
DC motor driver
3 aspects blush-less
DC motor driver
stepping motor driver
3 aspects blush-less
DC motor driver
stepping motor driver
Main application
4 to 6
4 to 6
2.7 to 6
3 to 6
3 to 6
2.5 to 6
4 to 6
4 to 6
2.5 to 5.5
2.5 to 5.5
2.7 to 5.5
4.5 to 5.5
4 to 6
Up to 7.5
Up to 7.5
Up to 7.5
4 to 13.2
4 to 13.2
2.7 to 5.5
2.7 to 5.5
4.8 to 11
10.8 to 13.2
10.8 to 13.2
■Motor Driver
• 20-pin SOP
• 16-pin SOP
4.5 to 5.5
4.5 to 5.5
3.0 to 3.6
10.8 to 13.2
10.8 to 13.2
4.5 to 5.5
2.5 to 5.5 2.7 to 5.5
Input voltage
(V) Output voltage
(V)
µ
PD16901
FunctionPart number PackageOutput current (mA) Main application
Step-up type DC/DC
converter for PCMCIA 4.5 to 5.5 11.72 to 12.28 140 • 14-pin SOP Note PC
■Power MOS IC for Voltage Regulator
Particular Purpose IC
Selection Guide X10679EJHV0SG00 255
Power Switch for USB Application
Internal
circuit Input
voltage (V)
Function Package
Circuit
current (mA)
Main application
Pch High-side switch
for USB
(H-active)
Pch High-side switch
for USB
(L-active)
Pch High-side switch
for USB
H-active, instant
switch off
Pch High-side switch
for USB
L-active, instant
switch off
Pch High-side switch
for USB
(L-active)
Pch High-side switch
for USB
(L-active)
2
2
2
2
4
2
4.0 to 5.5 0.6 to 1.25
• 8-pin SOP
(225 mil)
• 8-pin DIP
(300 mil)
• 8-pin SOP
(225 mil)
• 8-pin SOP
(225 mil)
• 16-pin DIP
(300 mil)
16-pin SOP
(300 mil)
• 8-pin DIP
(225 mil)
• 8-pin SOP
(225 mil)
Note PC
CRT monitor
LCD monitor
1.5
Over current
detect (A)
µ
PD16855A
µ
PD16855B
µ
PD16855C
µ
PD16855D
µ
PD16874★
µ
PD16875★
Part number Output
current (A)
0.5
()
()
CRT monitor
LCD monitor
Key board
HUB BOX
2.5
0.1
★: Under development
µ
PD72254Y★
Image IC
Part number Function
Graphics LSI Package
• 208-pin QFP
★: Under development
256 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Function
MPEG1 Audio/Video decoder for Video-CD
Signal processing for STB, includes MPEG2 Audio/Video
decoder, TS demultiplexer, Graphics and VR4110CPU
Part number
µ
PD61012
µ
PD61030
Package
• 100-pin LQFP
• 304-pin QFP
MPEG IC
■Video CD
4M DRAM
CD-ROM
decoder
MPEG video
decoder + A/V
separation/
synchronization
SRAM
CD-DA
CD-ROM
Driver RF amp.
PC2572
µ
Digital signal
processing
Digital servo
PD63702A
µ
System
microcontroller
(78K/0)
MPEG audio
decoder
PD61012
µ
2-ch audio
DF + DAC +
operational
amplifier
PD63210
µ
NTSC/PAL
encoder
Synchronization
signal generation
circuit
OSD
3-ch
video
DAC
SRAM
Video output
CVBS
Y
C
Synchronization
signal output
Audio output
L
R
Particular Purpose IC
Selection Guide X10679EJHV0SG00 257
Audio IC
■Radio frequency amplification
Recommended
operating
voltage range
(V) Double super
heterodyne DTS use ●7.5 to 8.5
µ
PC2533 • 36-pin SOP
●
Other functions
FM
detection
FM IF
amplification
FM
front end Car radio
AM tuner
Part number Function Recom-
mended ap-
plication Package
Recommended
operating
voltage range
(V)
6 to 16
µ
PC1228 ●
Play back
amplifier Recording
amplifier MIC
amplifier Other
functions
Dual ●
Radio cassette
recorder
●• 8-pin SIP
■Pre-amplifier
Car radio Package
Recommended application
Function
Part number
RL (Ω)
8
8
VCC (V)
9
6
µ
PC1316
PO (W)
1.2
0.5
■Power amplifier
Recommended
operating
voltage range
(V)
Recommended application
Car radio
Home
stereo Radio cassette
recorder
●
Function
3 to 16 Dual
Low pop noise •
14-pin DIPTAB
Part number
Electrical characteristics
(typical value) Package
Recommended
operating
voltage range
(V)
Recommended application
• 16-pin SOP
• 8-pin SOP
• 16-pin SOP
• 28-pin SOP
Portable
Home
stereo ●
●
●
●
●
●
●
●
●
●
●
●
16-bit D/A converter
16-bit D/A converter
18-bit D/A converter
16-bit D/A converter with digital filter
4.5 to 5.5
4.5 to 5.5
3.0 to 5.5
4.5 to 5.5
4.5 to 5.5
3.0 to 5.5
µ
PD6376
µ
PD6379
µ
PD6379A
µ
PD6379L
µ
PD6379AL
µ
PD63200
µ
PD63210
µ
PD63210L
Car stereo
Part number Function Package
■D/A converter for audio system
Features
Part number Function Package
•∆Σ type ADCs and DACs are incorporated.
• Mixers are incorporated into the analog input section and analog output section.
• Low-noise microphone amplifiers are incorporated.
• Sampling frequency: 2 to 48 kHz
(master clock: 256 fs)
• Single power source: +3 to 5.5 V
• Operating temperature range: –20 to +80°C
µ
PD63310
Sound codec • 80-pin TQFP
■Sound CODEC
258 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Audio IC
Recommended
operating
voltage range
(V)
Package
Portable
●
●
●
µ
PC2572
µ
PD63702A
µ
PD63710
●
●
●
Car stereo
Function Home
stereo
Part number Recommended application
4.5 to 5.5
4.5 to 5.5
4.5 to 5.5
RF amp, error amp, APC for CD player
Digital servo, data processor, DAC for CD player
RF amp, servo, data processor, ATT, DAC for CD
player
• 38-pin SOP
• 80-pin QFP
• 100-pin LQFP
■Device kit for CD
Stereo power amplifier protection circuit ●25 to 60
Recommended
operating
voltage range
(V) Home
stereo Tape
deck Radio cassette
recorder
Package
Function
Part number
µ
PC1237 • 8-pin SIP
Recommended application
■Other functions
Particular Purpose IC
Selection Guide X10679EJHV0SG00 259
Part number
µ
PC1851B
µ
PC1876
µ
PC1854A
Package
• 42-pin SDIP
• 42-pin SSOP
• 28-pin SDIP
• 28-pin SOP
TV IC
■US MTS Decoder
US MTS: Multi Television Sound for USA specifications
I2C Bus, Input Selector (2 ch), dbx NR, SAP Decoder,
Tone/Volume control
dbx NR, SAP Decoder
I2C Bus, dbx NR, SAP Decoder, Normal Output
Function
■US MTS (TV) System Block Diagram
CRTTuner PIF & SIF
DTS
Interface
I
2
C Bus
PC2800A
µ
Surround
Volume
Tone
L
R
Speaker
PC1316
Color
output
Vertical
output
Horizontal
output
Signal Processing
Color
Intensity
Deflection
DTS: Digital Tuning System
MTS: Multichannel Television Sound
PIF: Picture Intermediate Frequency
SIF: Sound Intermediate Frequency
Remark
Tuning
microcontroller
External input (for 2 stereos)
PC1854A
µ
Input
selector
PC1851B
µ
µ
Power
amp.
Remote
controller
receiver amp.
US-MTS processing
Stereo demodulation
SAP demodulation
dbx NR
I
2
C Bus interface
PC1876
µ
260 Selection Guide X10679EJHV0SG00
Particular Purpose IC
TV IC
■Matrix Surround
Package
• 20-pin DIP
• 30-pin SDIP
• 30-pin SDIP
• 30-pin SDIP
Function
Matrix Surround (Phase Shift)
Matrix Surround (Phase Shift), Tone/Balance/Volume, L + R output
I2C bus, BASS boost, Matrix Surround, Tone/Balance/Volume,
Audio output, L + R output
I2C bus, Matrix Surround, Tone/Balance/Volume, Mixer input
Part number
µ
PC1891A
µ
PC1892
µ
PC1853
µ
PC1857A
■Matrix Surround (TV) System Block Diagram
CRTTuner PIF & SIF
DTS
Interface
Tuning
microcontroller I
2
C Bus
PC2800A
µ
PC1854A
(US-MTS)
µ
L
R
I
2
C Bus Interface
PC1853/1857A
µ
L
R
Speaker
PC1316
µ
Color
output
Horizontal
output
Signal Processing
Color
Intensity
Deflection
DTS: Digital Tuning System
MTS: Multichannel Television Sound
PIF: Picture Intermediate Frequency
SIF: Sound Intermediate Frequency
Remark
PC1892
µ
Vertical
output
Tone Volume
Balance
PC1891A
µ
MTS decoder
Remote
controller
receiver amp.
Surround Power
amp.
Particular Purpose IC
Selection Guide X10679EJHV0SG00 261
TV IC
A/D Converter, QPSK demodulation, Viterbi decoder,
Reed-Solomon error correction
AGC amplifier + Quadrature demodulator
L band frequency down converter + IF-AGC amplifier
L band frequency down converter
AGC amplifier + Quadrature demodulator
Function Package
• 100-pin QFP
• 20-pin SSOP
• 20-pin SSOP
• 8-pin SSOP
(175 mil)
• 20-pin SSOP
■Digital Satellite Broadcasting
Part number
µ
PD61511
µ
PC2781
µ
PC2782
µ
PC2795
µ
PC3205
QAM IF down converter (AGC amplifier + MIX/OSC + Video
amplifier)
50 dB AGC amplifier + Video amplifier
AGC amplifier for Return-pass
Part number
µ
PC2798GR
µ
PC3206GR
µ
PC3211GR
Function Package
• 20-pin SSOP
• 20-pin SSOP
• 20-pin SSOP
■Digital CATV
262 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Multisync Monitor IC
Part number
µ
PC1883
µ
PC1884
µ
PD61882A★
Horizontal Vertical sync. processor, Picture geometry processor
Horizontal Vertical sync. processor, Picture geometry processor
(I2C bus)
Horizontal Vertical sync. processor, Picture geometry processor
(I2C bus)
Function Package
• 30-pin SDIP
• 30-pin SDIP
• 64-pin QFP
★: Under development
R
G
B
V. sync
H. sync/C. sync
G. on sync
CRT
RGB
Drive
Video
Amp.
Yoke
RGB
Input
process
Sync. signal
separator
OSD
HD VD
Control
H-F/V
Panel switch EEPROM Control D/A
CPU
PC1883
Deflection
Correction Drive
Vertical
Drive
Horizontal
Drive
Convergence
Signal input
µ
PC1884
µ
PD61882A
µ
Deflection
I
2
C
SDA SCL
Moire Canceller
Dynamic Focus
Multisync.
processor Distortion
Correction
Geometry
★: Under development
Particular Purpose IC
Selection Guide X10679EJHV0SG00 263
Digital Image IC
■3D Y/C Separator
Part number
µ
PD64082★Function Package
• 100-pin QFP
3D Y/C separator and noise reducer with 10 bit A/D converter
★: Under development
Clamp 10bit
Y-ADC
Bias 8bit
C-ADC
Timing
Generator
8f
SC
PLL
f
SC
/227.5f
H
Decoder
Sync. Sep
BPF
Comp./Y Input
C Input
YC Separator &
Y-Noise Reducer
C-Delay &
C-Noise Reducer
NonStd.
Detector Motion
Detector
4M EDO Interface
(Frame Delay)
4Mbit EDO DRAM
20.000 MHz
f
SC
in.
f
SC
out
10
HH
Decoder WCV-ID
Decoder
1M F.M. Interface
(Field Delay)
Field Memory
(Option)
Y-Enhancer
Y-Coring
+10bit
Y-DAC
10bit
C-DAC
I
2
C Bus
I/F
Y Output
Y
CC Output
DigitalY/C Output
I
2
C Bus Line
: Under development
10
µ
PD64082
264 Selection Guide X10679EJHV0SG00
Particular Purpose IC
■Analog Frontend IC
Part number
µ
PC1830
Function Package
• 42-pin SOP
5 V operation chroma decoder NTSC/PAL, 525/625 line, 50/60 Hz
selectable, Matrix circuit
Digital Image IC
■Video capture system block diagram
NTSC
3.58 PAL
4.43
Composite video
or Y/C separate
signal input
VD BLK
HD
Clamp
pulse CLP
RGB or YUV
H lock clock
generator Divider
910 f
H
8
8
8
Digital video (RGB or YUV) signal output
8 bit A/D
PC659A
µ
8 bit A/D
PC659A
µ
8 bit A/D
PC659A
µ
RGB/Color
difference decoder
PC1830
µ
Particular Purpose IC
Selection Guide X10679EJHV0SG00 265
Function
On-Screen Character Display IC
■Video type
Number of character types
Number of display characters
Character configuration
Character color
Character size
Internal video signal color
Background
Applicable video signal mode
Supply Voltage
Package
Part number
288 (12 lines × 24 digits)
12 × 18
128 (ROM) 256 (ROM)
µ
PD6465
µ
PD6464A
1 dot/1H, 2H (per line)
Single (white, the luminance level of a character can be set in 2 stages.)
White/Black/Blue/Green
None/Fringed/Squared/Solid (per field)
NTSC/PAL/PAL-M/SECAM
4.5 to 5.5 V
• 24-pin SDIP (300 mil)
• 24-pin SOP (375 mil)
•
µ
PD6464A adapts PAL-N.
Number of character types
Number of display characters
Character configuration
Character color
Character size (per line)
Character color reverse
(per character)
Background (per frame)
Fringed (per frame)
Supply voltage
Package
■RGB type
Function
µ
PD6461
µ
PD6462
µ
PD6466
Part number
512 (ROM)128 (ROM)256 (ROM)
288 (12 lines × 24 digits)
12 × 18
8 colors
Black character/No friged
White character/Friged
Black character/No friged
1 dot/1H, 2H 1 dot/1H, 2H, 3H, 4H
None
Square (8 colors)
Solid (8 colors)
Two colors (Black, White)
2.7 to 5.5 V
• 20-pin SSOP (300 mil)
• 24-pin SOP (375 mil)
• 20-pin SSOP (300 mil)
• 24-pin SOP (375 mil) • 20-pin SSOP (300 mil)
• Making ideally suited for camcoders (
µ
PD6461,
µ
PD6462)
•
µ
PD6461 and
µ
PD6462 are commands conpertible and pins conpertible for 20-pin SSOP package.
•
µ
PD6466 has a blue background and character mirror reverse function.
Package
• 16-pin SOP (300 mil)
• 20-pin SOP (300 mil)
• 22-pin SSOP (225 mil)
• 38-pin SSOP (300 mil)
Area sensor vertical drive interface
Area sensor vertical drive interface
Area sensor vertical, VOD shutter driver, for low voltage logic
Area sensor vertical driver 10ch (3 state: 6, 2 state: 4), VOD
shutter driver, for low voltage logic
FunctionPart number
µ
PD16501
µ
PD16502
µ
PD16510
µ
PD16520★
Video Camera IC
■CCD driver circuit
★: Under development
266 Selection Guide X10679EJHV0SG00
Particular Purpose IC
Part number
µ
PC2800A
■Infrared remote control preamplifiers IC
Remote Control IC
Remarks
Active low type
Features
Internal high trap circuit
Supply voltage
5 V ± 10% Package
• 8-pin SOP
µ
PD6121G-001
µ
PD6122G-001
2.0 to 3.3 V
400 to 500 kHz ceramic oscillator
Leader Custom code 16-bit Data code 8-bit Data code 8-bit
P.P.M. 0 ···· 1····
38 kHz • carrier modulation(fOSC = 455 kHz)
16-bit set∗
32 × 2 64 × 2
32 64
• 20-pin SOP • 24-pin SOP
Part number
Operating voltage range
Operation clock (fOSC)
Transmission format
Modulation mode
Custom code
Data code
Number of keys
Package
■Infrared remote control IC
∗: All codes except code “00FFH” are managed by NEC.
Supply voltage (V)
2.0 to 5.5
2.4 to 5.5
I/O
Serial
4-bit · Parallel
8-bit · Parallel
Package
• 14-pin DIP
• 16-pin SOP
• 18-pin DIP
• 20-pin SOP
• 20-pin DIP
• 20-pin SOP
Part number
µ
PD4990A
µ
PD4991A
µ
PD4992
Alarm
✕
✕
Circuit Current (
µ
A)
20
14
6
Clock IC
Rotary Encoder IC
Counter-bit
12
Axis
2
1
1
(Expansion for
µ
PD4702)
Package
• 24-pin DIP
• 24-pin SOP
Part number
µ
PD4701A
µ
PD4702
µ
PD4704
Supply voltage (V)
5.0
8• 20-pin DIP
• 20-pin SOP
Particular Purpose IC
Selection Guide X10679EJHV0SG00 267
• 20-pin DIP
• 20-pin SOP
• 28-pin DIP
• 28-pin SOP
• 24-pin DIP
• 24-pin SOP
• 28-pin DIP
• 28-pin SOP
• 20-pin SSOP
• 30-pin SSOP
• 36-pin SSOP
A/D Converter IC
Resolution
(bits)
8
■A/D Converter for Video processing
Linearity
(%FSR)
0.2
Sampling
time (MSPS)
20
Supply
voltage (V)
+5
Data format
Binary
Output
format
8-bit
parallel
Part
number Remarks
Parallel approximation
Video processing
Package
• 24-pin SOP
µ
PC659A
Supply
voltage (V)
+5 to +15
+5
+5 to +15
+5
+5
+5
Resolution
(bits)
6
(4 circuits)
6
(8 circuits)
8
(8 circuits)
8
(12 circuits)
Settling
time (
µ
s)
200
200
100
100
Linearity
(%FSR)
Monotonicity
Monotonicity
0.31
0.31
Input
format
Binary
Binary
Binary
Binary
D/A Converter IC
■D/A Converter
Output
format
Voltage
output
Voltage
output
Voltage
output
Voltage
output
Part
number
µ
PD6325
µ
PD6335
µ
PD6326
µ
PD6336
µ
PD6221
µ
PD6222
Package
• 16-pin DIP
• 16-pin SOP
• 16-pin DIP
• 20-pin DIP
• 20-pin SOP
• 24-pin SDIP
• 24-pin SOP
Remarks
Serial input, CMOS
Serial input, CMOS
I2C-bus compatible
Internal Output CMOS' Buffer
I2C-bus compatible
Internal Output CMOS' Buffer
■D/A Converter for Video processing
Supply
voltage (V)
+5
Resolution
(bits)
10
Part
number
µ
PC667
Input
format
Binary
Remarks
Parallel input
Video processing
Sampling
rate (MSPS)
60
Linearity
(%FSR)
0.1
Output
format
Voltage
output
Package
• 30-pin SDIP
Line Driver Receiver IC
Capacitor (
µ
F)Driver Package
Part number Supply voltage (V)
1.0 to 4.7 (4 pcs)
4.7 to 47 (4 pcs)
0.33 to 4.7 (4 or 5 pcs)
0.47 to 4.7 (4 or 5 pcs)
0.33 to 4.7 (4 or 5 pcs)
1.0 to 4.7 (4 pcs)
µ
PD4711B
µ
PD4712C
µ
PD4712D
µ
PD4713A
µ
PD4714A
µ
PD4715A
µ
PD4721
µ
PD4722
µ
PD4723
µ
PD4724
µ
PD4726
2
4
4
3
3
5
2
4
3
3
4
2
4
4
3
5
3
2
4
3
5
7
Receiver
5.0
3.3/5.0
5.0
268 Selection Guide X10679EJHV0SG00
[MEMO]
Selection Guide X10679EJHV0SG00 269
General Purpose Linear IC
Operational Amplifier..................................................... 270
Comparator ..................................................................... 271
Fixed Output Voltage, 3-Terminal Regulator.............. 271
Variable Output Voltage Regulator .............................. 272
Regulator with System Reset....................................... 272
Regulator with ON/OFF Function ................................. 272
High Precision Reference Voltage............................... 273
Switching Regulator Control Circuit ........................... 273
Functional Block ............................................................ 274
5
270 Selection Guide X10679EJHV0SG00
General Purpose Linear IC
General
use
Number
of
circuits∗1
Part number
Operational Amplifier
µ
PC151
µ
PC251
µ
PC258
µ
PC259
µ
PC451
µ
PC452
µ
PC458
µ
PC801
µ
PC802
µ
PC803
µ
PC804
µ
PC811
µ
PC812
µ
PC813
µ
PC814
µ
PC815
µ
PC816
µ
PC821
µ
PC822
µ
PC824
µ
PC831
µ
PC832
µ
PC834
µ
PC842
µ
PC844
µ
PC1251
–
–
–
–
–
–
Communi-
cation/
industry
use
V±
(recom-
mended
value)
(V)∗2
VIO
(MAX.)
(mV)
ICC
(MAX.)
(mA)
SR
(TYP.)
(V/
µ
s) Features and Functions
Packages∗3
CHAG2
µ
PC741
µ
PC1458
µ
PC4558
µ
PC4560
µ
PC324
µ
PC3403
µ
PC4741
µ
PC4081
µ
PC4250
µ
PC4082
µ
PC4084
µ
PC4091
µ
PC4092
µ
PC4093
µ
PC4094
–
–
µ
PC4071
µ
PC4072
µ
PC4074
µ
PC4061
µ
PC4062
µ
PC4064
µ
PC4742
µ
PC4744
µ
PC358
µ
PC4556
µ
PC4557
µ
PC4559
µ
PC4570
µ
PC4572
µ
PC4574
1
1
2
2
4
4
4
1
1
2
4
1
2
1
2
1
1
1
2
4
1
2
4
2
4
2
2
2
2
2
2
4
±7.5 to ±16
±7.5 to ±16
±4 to ±16
±4 to ±16
+3 to +30
+3 to +32
±4 to ±16
±5 to ±16
±1 to ±16
±5 to ±16
±5 to ±16
±5 to ±16
±5 to ±16
±5 to ±16
±5 to ±16
±3 to ±20
±3 to ±20
±5 to ±16
±5 to ±16
±5 to ±16
±2 to ±16
±2 to ±16
±2 to ±16
+3 to +32
+3 to +32
+3 to +30
±4 to ±16
±4 to ±16
±4 to ±16
±4 to ±16
±2 to ±7
±4 to ±16
±6
±6
±6
±6
±7
±7
±5
±15
±6
±15
±15
±2.5
±3
±2.5
±3
±0.06
±0.06
±10
±10
±10
±10
±10
±10
±5
±5
±7
±6
±6
±6
±5
±5
±5
2.8
5.6
–
–
2.0
7.0
7.0
2.8
0.1
5.6
11.2
3.4
6.8
3.4
6.8
4.6
4.6
2.7
5.0
10.0
0.25
0.5
1.0
5.5
11.0
1.2
–
–
–
8.0
7.0
12.0
0.5
0.5
1.0
2.8
0.3
0.8
1.0
13
0 to 1.0
13
13
15
15
25
25
1.6
7.6
13
13
13
3.0
3.0
3.0
7.0
7.0
0.3
5.0
1.0
2.0
7.0
6.0
6.0
General purpose
General purpose
Low noise
Low noise, high output current
Single supply voltage
Single supply voltage, high speed
Low noise
J-FET input
Micro-power
J-FET input
J-FET input
High accuracy, J-FET input
High accuracy, J-FET input
High accuracy, high speed, J-FET input
High accuracy, high speed, J-FET input
Super high accuracy
Super high accuracy
Low noise, J-FET input
Low noise, J-FET input
Low noise, J-FET input
Micro-power, J-FET input
Micro-power, J-FET input
Micro-power, J-FET input
Single supply voltage, high speed, wide band
Single supply voltage, high speed, wide band
Single supply voltatge
Low noise, wide band
Low noise, high output current
Low noise, wide band
Super low noise, wide band
Super low noise, low voltage
Super low noise, wide band
8
8
8
8
14
14
14
8
8
8
14
8
8
8
8
8
8
8
8∗4
14
8
8
14
8
14
8∗4
8
8
8
8∗4
8∗4
14
Number
of pins
∗1 : Single type has a offset adjust pin.
∗2 : For product indicated by +/– voltage, single supply voltage operation is possible if the input/output voltage range is
observed.
∗3 : C, G2 or HA shows Package Type, as follows.
C : Plastic DIP (300 mil)
G2 : Plastic SOP (225 mil)
HA : 9-pin plastic slim SIP
∗4 : HA has 9 pins.
Selection Guide X10679EJHV0SG00 271
General Purpose Linear IC
General
use
Number
of
circuits
Part number
Comparator
µ
PC177
µ
PC271
µ
PC272
µ
PC277
Communi-
cation/
industry
use
V±
(recommended
value)
(V)
VIO
(MAX.)
(mV)
I+
(MAX.)
(mA)
td
(TYP.)
(
µ
s)
Features and
Functions
Packages∗1
CHAG2
µ
PC339
µ
PC311
µ
PC319
µ
PC393
4
1
2
2
+2 to +32
+5 to +32
+5 to +32
+2 to +32
±5.0
±7.5
±8.0
±5.0
2.0
7.5
12.5
1.0
1.3
0.2
0.08
1.3
Single supply
voltage
High speed
High speed
Single supply
voltage
14
8
14
8∗2
∗1: C, G2 or HA shows Package Type, as follows.
C : Plastic DIP (300 mil)
G2 : Plastic SOP (225 mil)
HA : 9-pin plastic slim SIP
∗2: HA has 9 pins.
Number
of pins
30
35
35
40
35
40
35
40
µ
PC78L00
µ
PC78N00
µ
PC78M00A
µ
PC7800A
µ
PC29L00
µ
PC29M00
µ
PC2900
µ
PC24A00
µ
PC24M00A
µ
PC2400A
µ
PC79L00
µ
PC79N00
µ
PC79M00
µ
PC7900A
Improved
version of
µ
PC78M00
Improved
version of
µ
PC7800
0.1
0.3
0.5
1.0
0.1
0.5
1.0
2.0
0.5
1.0
0.1
0.3
0.5
1.0
Type Part number Output voltage (V)
Output
current
(A) 75 Remarks
896
43 3.3
• TO-126
• MP-45∗2
• MP-45∗2
• MP-45∗2
• MP-45∗2
• MP-45∗2
• TO-92
• TO-126
• MP-45∗2
• MP-45∗2
0.7/2∗3
12.5
15
15
0.7/2∗3
20
15
15
0.7
12.5
15
15
Total power
dissipation (W)
∗1Package
Input
voltage (V)
Absolute maximum ratings
12 2410 1815
9.3
Improved
version of
µ
PC7900
Low
dropout
voltage type
Low
dropout
voltage type
Low
dropout
voltage type
Low
dropout
voltage type
Low
dropout
voltage type
Low
dropout
voltage type
1.0/2.0∗4
15
1.0/2.0∗4
15
• TO-251
• TO-252
• MP-45∗2
• TO-251
• TO-252
• MP-45∗2
16
20
20
36
36
36
–30
–35
–35
–40
–35
–40
–35
–40
∗1 : Limited by internal circuit
∗2 : TO-220 Plastic insulated package
∗3 : With 16 cm2 × 0.7 mm ceramic substrate
∗4 : With 7.5 cm2 × 0.7 mm ceramic substrate
Fixed Output Voltage, 3-Terminal Regulator
Positive
voltage
output
Nega-
tive
voltage
output
• TO-92
• TO-243
• TO-92
• TO-243
272 Selection Guide X10679EJHV0SG00
General Purpose Linear IC
Variable Output Voltage Regulator
µ
PC305
µ
PC317
µ
PC1093
µ
PC1943
µ
PC1944
µ
PC1945★
µ
PC337
40
40
37
25
25
12
–40
0.35, 0.44
15∗1
0.48, 0.7, 2∗3,
0.2
1.6∗3
0.385, 0.56,
1.6∗3
0.41∗4
15∗1
0.05
1.5
0.15
0.05
0.05
0.015
1.5
4.5 to 30
1.3 to 30
2.5 to 36
1.26 to 24
1.26 to 24
0.4 to 9
–1.3 to –30
• 8-pin DIP
• 8-pin SOP
• MP-45∗2
• 8-pin SOP
• TO-92
• TO-243
• 5-pin mini mold
• TO-243
• 8-pin SOP
• TO-92
• TO-243
• 5-pin mini mold
• MP-45∗2
3-pin regulator
Shunt regulator
Shunt regulator
for Low Voltage
Shunt regulator
for Low Voltage
Shunt regulator
for Low Voltage
3-pin regulator
Package
Type Absolute maximum ratings
Total power
dissipation (W)
Input voltage
(V)
Part number Output current
(A)
Output voltage
range (V)
Positive
voltage
output
∗1 : Limited by internal circuit
∗2 : TO-220 Plastic insulated package
∗3 : When mounted on 16 cm2 (0.7 mm thick) ceramic board
∗4 : When mounted on 75 mm2 (0.7 mm thick) ceramic board
Negative
voltage
output
Remarks
★: Under development
Regulator with System Reset
Absolute maximum ratings Remarks
Output
voltage
(V)
Reset output logic
Reset
start
voltage
(V)
Output
current
(A)
Type Active
low Active
high Input voltage
(V)
Part
number Package
Total power
dissipation (W)
3
5
5
5
0.1
0.1
0.1
0.5
2.85
2.85
4.75
4.85
12
12
12
35
1.2∗
1.2∗
1.2∗
20∗
Low dropout
type
Low dropout
type
Low dropout
type
Low dropout
type
• TO-126
(4-pin)
• TO-126
(4-pin)
• TO-126
(4-pin)
• TO-220
(5-pin)
µ
PC2251
µ
PC2253
µ
PC2255
µ
PC2260
Positive
voltage
output
∗: Limited by internal circuit
• TO-126 (4-pin)
• TO-126 Gullwing (4-pin)
• 8-pin SOP
Absolute maximum ratings
ON/OFF voltage (V) Input voltage
(V) Package
Total power
dissipation (W)
20
20
1.2∗
0.48∗
µ
PC29S78
µ
PC29S10
Output
current
(A) Output ON Output OFF
2.0
2.0
0.8
0.8
0.1
0.1
7.8
10
Output
voltage
(V)
Part number
Regulator with ON/OFF Function
∗: Limited by internal circuit
Selection Guide X10679EJHV0SG00 273
General Purpose Linear IC
Output voltage
(V)
2.5 ±0.025
Output current
(mA)
10
Package
• 8-pin DIP
Input voltage
range (V)
4.5 to 40
Total power
dissipation (mW)
350, 500
Output voltage vs.
temperature (ppm/°C)
40
High Precision Reference Voltage
Part
number
µ
PC1060
Package
Input voltage
range (V)
Part
number
• 16-pin DIP
• 16-pin SOP∗1
(375 mil/
300 mil)
• 14-pin DIP
• 14-pin SOP
• 16-pin DIP
• 16-pin SOP
• 16-pin DIP
• 16-pin SOP
• 16-pin DIP
• 16-pin SOP
• 16-pin DIP
• 16-pin SOP
• 16-pin DIP
• 16-pin SOP
• 8-pin SOP
• 16-pin SSOP
• 16-pin T-SSOP
• 16-pin T-SSOP
• 30-pin SSOP
Absolute maximum ratings
Output
current (mA) Total power
dissipation (W)
µ
PC494
µ
PC1094
µ
PC1099
µ
PC1905
µ
PC1909★
µ
PC1100
µ
PC1150
µ
PC1933
µ
PC1934
µ
PC1935
µ
PC16902★
250
1200
(peak)
1200
(peak)
1200
(peak)
1200
(peak)
25
25
21
21
21
1000
(peak)
7 to 40
11 to 24
11.5 to 24
12 to 30
7 to 24
3.6 to 40
3.6 to 40
2.5 to 20
2.5 to 20
2.5 to 20
5.2 to 25
1, 0.78∗2, 0.65∗2
0.57, 0.55
1, 0.694
1, 0.694
1, 0.694
1, 0.694
1, 0.694
0.48
0.4, 0.417
0.417
0.625
Output circuit operation
mode Applications
Push-pull/single selectable
Totem pole circuit configuration
Single mode
Totem pole circuit configuration
Single mode
Totem pole circuit configuration
Single mode
Totem pole circuit configuration
Q, Q output
2 outputs (synchronous
control possible)
If one output is shorted, both
outputs will be turned OFF.
2 outputs (synchronous control
possible)
If one output is shorted, only
the output will be turned OFF.
Open drain
1 output
Open drain
2 outputs
Open drain
3 outputs
High side: necessary drivers
Low side: push-pull drivers
General purpose
Can operate up to
500 kHz
General purpose
Can operate up to
500 kHz
General purpose
Can operate up to
500 kHz
General purpose
Can operate up to
500 kHz
ZCS, Half bridge
DC/DC converter
DC/DC converter
DC/DC converter
DC/DC converter
DC/DC converter
5 V, 3.3 V
Synchronous
rectifier controller
∗1:
µ
PC494G is 375 mil.
µ
PC494GS is 300 mil.
∗2 : When mounted on 5 × 5 cm2 (1.6 mm thick) glass epoxy board.
Switching Regulator Control Circuit
★: Under development
274 Selection Guide X10679EJHV0SG00
General Purpose Linear IC
µ
PD5205
µ
PC1555
µ
PD5555
µ
PD5556
Single-pole 8 position mode/double-pole 4 position mode
Supply Voltage: 44 V, ON Resistance: 270 Ω TYP.
CR Timer, Operating Temperature: –20 ~ +80°C
Supply Voltage: 4.5 ~ 16 V, Free Running Frequency: 0.1 ~ 100 kHz
CMOS CR Timer, CMOS Type of PC1555
Supply Voltage: 3 ~ 16 V, Free Running Frequency: 0.1 ~ 500 kHz
CMOS CR Timer
µ
Dual Type of PD5555
Functional Block
• 24-pin shrink DIP
• 24-pin SOP
• 8-pin DIP
• 8-pin SOP
• 8-pin DIP
• 8-pin SOP
• 14-pin DIP
• 14-pin SOP
Part numberFunction Features Package
Analog
Multiplexer
Precision
Timer
µ
µ
Selection Guide X10679EJHV0SG00 275
Transistor/Diode/Thyristor
Transistor ........................................................................ 276
• Quick Reference by Package .................................. 276
• Quick Reference Table by
Function/Application ................................................ 286
Field Effect Transistor ................................................... 292
• Small Signal FET....................................................... 292
• Power MOS FET ......................................................... 295
Transistor with Internal Resistor ................................. 309
Transistor for Array........................................................ 314
Transistor Array.............................................................. 315
Zener Diode..................................................................... 317
Noise Clipping Diode..................................................... 319
Thyristor .......................................................................... 321
6
276 Selection Guide X10679EJHV0SG00
Transistor
Quick Reference by Package
■TO-92 Type Transistor
VCEO (V) ~15 ~30 ~50 ~70 ~100 ~150 ~200 ~250 ~400
IC (A)
~20 m 2SC1674
2SA1206∗∗ 2SA988
2SA992
2SC1841
2SC1845
2SA733 2SA6751) 2SA1376 2SA1544
2SA990 2SA1376A
2SC945 2SC3478
~100 m 2SC1842 2SC3478A
2SC1843
AA1[ ]
AN1[ ]
2SC2901∗∗ 2SC3622∗
(150 mA)
2SC3622A∗
(150 mA)
2SC3615∗2SA953 2SA954 2SA1625
(300 mA) 2SC2002 2SC2003
2SA952 2SB1116 AD1[ ] 2SD1698
2SC2001 2SD1616 AD2[ ]∗∗∗ (80 V)
2SC3616∗AR1[ ]
(25 V/ 2SB1116A
700 mA) (60 V)
AB1[ ] 2SD1616A
(25 V/ (60 V)
700 mA) 2SD1701
AP1[ ] (60 V)
(25 V/
700 mA)
2SD1513
(16 V/2.0 A)
2SB1068
(16 V/2.0 A)
AQ1[ ]
(20 V/2.0 A)
2SB1300
(16 V/3 A)
~50 m
~200 m
~500 m
~2.0
~3.0
~1.0 ∗∗∗
1) VCES : Darlington transistor, ∗: High hFE transistor, ∗∗: High speed switching, ∗∗∗: Contains internal zener diode
TO–92
Transistor
Selection Guide X10679EJHV0SG00 277
Quick Reference by Package
VCEO (V) ~15 ~20 ~30 ~50 ~120
IC (A)
2SC2786 2SC2787
2SA1459** 2SC2784
2SA1175
2SC2785
~100 m 2SC3623∗
BA1[ ]
BN1[ ]
2SC3732∗∗ 2SA1458∗∗
(40 V)
2SC3623A∗
(150 mA)
2SC3731∗∗
(40 V)
2SB810 BB1[ ]
2SD1020 (25 V)
BP1[ ]
(25 V)
∗: High hFE transistor, ∗∗: High speed switching
~20 m
~50 m
SST
~200 m
~700 m
■ SST Type Transistor
278 Selection Guide X10679EJHV0SG00
Transistor
Quick Reference by Package
■SP-8 Type Transistor
VCEO (V) ~16 ~25 ~50 ~80 ~140 ~160 ~300 ~400 ~600
IC (A)
2SA915 2SA916
2SC1940 2SC1941
2SC3209
2SC4000
(250 V/
100 mA)
2SA1221 2SA1222
2SC2958 2SC2959
2SB605
2SD571
2SC2721
2SB564 2SA1460∗∗ 2SB984 2SA1627
2SD471 2SB734 2SB1093
2SC3733∗∗ 2SD1312
2SD774 2SD1579
2SD1582∗2SD1697
(800 mA)
2SD1700
(60 V/
800 mA)
2SD1843
(60 V)
2SB733 2SD1581∗2SD2463 2SD1779∗2SA1626
2SD773 (60 V)
2SD1780∗
(60 V)
CE1[ ]∗∗∗
(60 V)
CE2[ ]∗
(60 V)
2SB1117 2SB1318
(100 V)
~5.0 2SA1897
~50 m
~200 m
~500 m
~700 m
~1.0
~2.0
∗∗∗
∗∗∗
~3.0
SP–8
: Darlington transistor, *: High hFE transistor, **: High speed switching, ***: Internal zener diode
Transistor
Selection Guide X10679EJHV0SG00 279
Quick Reference by Package
IC(DC)
(A)
~0.5
~1.0
~2.0
~5.0
: Darlington transistor, : Complementary pair, : Single High hFE, : Low VCE(sat)
VCEO (V) ~45 ~60 ~80 ~120 ~160 ~300 ~400 ~600
2SA1546
2SC4001
2SC2688 2SA1156
2SC2752
2SD1630 ∗ 2SD415 2SA1486
2SC3840
2SD1695 ∗2SB794 2SB795 2SC2690 2SC2690A
2SD985 2SD986
2SD794 2SD794A 2SB1149
2SB772 2SB1150 ∗ 2SD1692
2SD882 2SD1693 ∗ 2SC4342
2SD1694
2SB1217
2SD1818
2SB1151
2SD1691
IC(DC)
(A)
~1.0
~0.5
~1.0
~2.0
~3.0
~5.0
: Darlington transistor, : Complementary pair, ∗: Internal zener diode between C-B, : Low VCE(sat),
: Single Hight hFE
■MP-5 (TO-126) Type Transistor
■MP-3 Type Transistor
VCEO (V) ~20 ~40 ~60 ~100 ~150 ~300 ~400 ~600
2SA1400
2SC3588
2SB963 2SA1413
2SD1286 2SC3632
2SD1583 2SD992 2SD1164 2SB768 2SC2885 2SA1412
2SD1033 2SC2946 2SC3631
2SB962 2SD1584
~3.0 2SB1261
2SD1899
2SA1385 2SA1647 2SC4346
2SC3518 2SC4331
2SA1648
~10 2SA1615 2SA1649
MP–3
MP–5
(TO–126)
Transistor
280 Selection Guide X10679EJHV0SG00
Quick Reference by Package
■MP-25 (TO-220) Type Transistor
~40 ~60 ~80 ~100 ~150 ~300 ~400
2SC1505
2SA1008 2SB546A 2SA1009 2SA1009A
2SC2331 2SD401A 2SC2333
2SA1069 2SA1069A 2SB601 2SC2518
~5.0 2SD560
2SC2517
2SA1129 2SB707 2SB708 2SA1010 2SC2335
~7.0 2SC2334
2SA1645
~7.0 2SA1646
VCEO (V)
IC(DC)
(A)
~0.5
~2.0
: Darlington transistor, : Complementary pair, ∗: Internal zener diode between C-B, : Low VCE(sat)
■MP-40 Type Transistor
~60 ~100 ~400
~5.0 2SD1392 ∗2SD1308
~7.0 2SC4305 2SC3158
~8.0 2SD1309
2SA1261 2SC3159
~10 2SC3157
2SC4350
IC(DC)
(A)
VCEO (V)
: Darlington transistor, : Complementary pair, ∗: Internal zener diode between C-B
MP–25
(TO–220)
MP–40
Transistor
Selection Guide X10679EJHV0SG00 281
Quick Reference by Package
■MP-45, MP-45F (TO-220 Insulated Type) Transistor
~60 ~100 ~300 ~400
MP-45 MP-45F MP-45 MP-45F MP-45 MP-45
2SA1395 2SC3569
2SC3567
2SB1094 2SB1453
~3.0 2SD1585 2SD2164
2SD1593
2SA1394 2SB1098 2SC3570
2SA1441 2SD1589
2SC3691 2SA1741 2SA1650 2SB1430
2SC4351 ∗2SC4549 2SD2161 2SD1592
~6.0 2SD1594 2SD2165
2SB1097 2SC4062 2SC4553 2SC3571
2SD1588
2SA1442 2SA1742
2SC3692 2SC4550
2SB1099
~8.0 2SD1590 2SB1431
2SD2162
2SA1443 2SA1743 2SA1396 2SC3572
2SC3693 2SC4551 2SC3568
2SA1652
~10 2SC4336
2SA1720
2SB1100 2SB1432
2SD1591 2SD2163
2SA1444 2SA1744 2SC4063 2SC4554
2SC3694 2SC4552
IC(DC)
(A)
Package
VCEO (V)
~2.0
~5.0
~7.0
~15
: Darlington transistor, : Complementary pair, ∗: Internal zener diode between C-B, : Low VCE(sat),
: Single High hFE
MP–45
(MP-25 Insulated type)
MP–45F
(MP-25 Insulated type)
Transistor
282 Selection Guide X10679EJHV0SG00
Quick Reference by Package
IC(DC)
(A)
~1.0
~15
: Darlington transistor, ∗: MP-88
■MP-80 Type Transistor
VCEO (V) ~100 ~400
~5.0 2SC2908
2SB897 2SC2749
2SD1210
2SC2750 2SC2751
2SD1296
■MP-10 Type Transistor
VCEO (V) ~60 ~100
2.5 2SC4814
2SA1843 2SA1840
~5 2SC4815 2SC4810
2SA1845
~7 2SC4813
2SA1841
2SC4811
~10 2SA1847
IC(DC)
(A)
: Darlington transistor, : Complementary pair, : Low VCE(sat) High hFE, : Low VCE(sat)
~8
MP–80
MP–10
Transistor
Selection Guide X10679EJHV0SG00 283
Quick Reference by Package
■Mini-Mold Transistor
VCEO (V) ~15 ~20 ~30 ~40 ~50 ~60 ~80 ~120 ~200 ~300
~20 2SC2223 2SD2383
~30 2SA1226
2SA1462 2SC1009A 2SA811A 2SC1653
2SA1247 (130 V)
2SC1622A 2SC1654
2SC3115 (160 V)
2SA812 2SA1330
2SC1623 2SC3360
FA1[ ]
FN1[ ]
2SC3624
2SC3624A
2SC3735 2SC1621 2SA1461
2SC3734
2SB736 2SB736A
2SD780 2SD780A
2SA1464
2SC3739
2SB624
(–25 V)
2SD596
(25 V)
FB1[ ]
(25 V)
FP1[ ]
(–25 V)
IC (mA)
~50
~100
~150
~200
~300
~500
~700
Mini mold
SC-59
Transistor
284 Selection Guide X10679EJHV0SG00
Quick Reference by Package
IC (A)
~50 m
~300 m
~0.7
~3.0
~5.0
: Darlington connection
■MP-2 Type Transistor
VCEO (V) ~60 ~600
2SA1871
2SC4942
2SB1578
2SD2425
IC (A)
~1.0
~5.0
■Power Mini-Mold Transistor
VCEO (V) ~20 ~25 ~50 ~60 ~80 ~100 ~120 ~140 ~300
2SA1173
2SC2780
~200 m 2SC3554
2SC3617 2SB800
2SD1001
2SC3618 2SB799 2SB805 2SB806
2SD1000 2SD1006 2SD1007
2SB798 2SA1463 2SB1115A 2SB804
2SD999 2SB1115 2SD1615A 2SD1005
~1.0 2SC3736 HD1[ ] 2SD1699
2SD1615 HD2[ ]
2SD1702 HR1[ ]
2SB1114 2SD1950
~2.0 2SD1614
HQ1[ ]
2SB1628 2SB1572
2SD2403
2SB1571
2SD2402
Power mini mold
SC-62
MP-2
SC-84
Transistor
Selection Guide X10679EJHV0SG00 285
Quick Reference by Package
■MP-3 Type (SC-63) Transistor
VCEO (V) ~20 ~30 ~45 ~60 ~200 ~400 ~600
2SA1400-Z
2SC3588-Z
2SB963-Z 2SA1413-Z
2SD1286-Z 2SC3632-Z
2SD1583-Z 2SD1164-Z 2SB768 2SA1412-Z
(1.5 A) (150 V) 2SC3631-Z
~2.0 2SD1033
(150 V)
2SC2946(1)
2SB962-Z 2SB1261-Z
~3.0 2SD1584-Z
2SD1899-Z
2SA1385-Z
2SC3518-Z
~10 2SA1615-Z
IC (A)
: Darlington connection
~0.5
~1.0
~5.0
■Small Mini-Mold Transistor
VCEO (V) ~15 ~20 ~30 ~40 ~50 ~120
~20 2SC4178
2SA1610 2SC4179 2SA1612
2SC4180
2SA1611
2SC4177
GA1[ ]
GN1[ ]
~150 2SC4181
~200 2SC4176 2SC4175
2SB1475 2SA1608
(–25 V) 2SC4173
2SD2228
(25 V)
IC (mA)
~50
~100
~500
■Ultra Small Mini-Mold Transistor
VCEO (V) ~50
2SA1836
2SC4783
IC (mA)
~100
MP-3
Small mini mold
SC-70
Ultra small mini mold
286 Selection Guide X10679EJHV0SG00
Transistor
2SC1674 2SC2786 2SC4178 2SC2223
2SC2787 2SC4179 2SC1009A
2SA733 2SA1175 2SA1611 2SA812
(2SA812)
2SA988 2SA1612 2SA811A
2SC945 2SC2785 2SC4177 2SC1623
(2SC1623)
2SC1841 2SC1622A
2SC3622/A 2SC3623/A 2SC4181 2SC3624/A
2SA992 2SA1174 2SA1247
2SC1845 2SC2784 2SC3115
FM/FM RF RF/MIX/CON
FM AM/FM/AM MIX/OSC/IF
Low Noise Amplification
POWER
MINI
MINI
MOLD
Audio Frequency
Amplification
SMALL MINI
MOLD
Quick Reference Table by Function/Application
Small Signal Transistor
■Small Signal Transistor (1/2)
2SA952 2SB810 2SB624
2SA953 2SB736
2SA954 2SB736A 2SB800
2SA1376 2SA1330
2SB564 2SB811 2SB798
2SB605 2SB799
2SB1068 2SB1114
Driver Output
2SB1116 2SB1115
2SB1116A 2SB1115A
2SC2001 2SD1020 2SD596
2SC2002 2SD780
2SC2003 2SD780A 2SD1001
2SC3478 2SC3360
2SC1940 2SC1653 2SC2780
2SC1941 2SC1654
2SC3209 2SC3554
2SC3615 2SC3617
2SC3616 2SC3618
2SD471 2SD999
2SD571 2SD1000
2SD1513 2SD1614
2SD1616 2SD1615
2SD1616A 2SD1615A
2SD1698 2SD1697 2SD1699
2SD1701 2SD1700 2SD1702
2SD1581 2SD1950
TO-92 SP-8 SST
Transistor
Selection Guide X10679EJHV0SG00 287
Quick Reference Table by Function/Application
Small Signal Transistor
■Small Signal Transistor (2/2)
Switching
POWER
MINI
MINI
MOLD
SMALL MINI
MOLD
TO-92 SP-8 SST
2SA1206 2SA1459 2SA1610 2SA1462
2SA1608 2SA1464
2SA1460 2SA1463
2SA1458 2SA1461
2SC4173 2SC3739
2SC2901 2SC3732 2SC4176 2SC3735
2SC3733 2SC3736
2SC3731 2SC3734
288 Selection Guide X10679EJHV0SG00
Transistor
SP-8 MP-2 MP-3 MP-25 MP-10 MP-45 MP-45F
2SB1581
2SA1897 2SA1615
(5A)
2SB1117
2SB772
2SD882
2SA1649
2SB1261 2SB1217
2SD1899 2SD1818
2SB1578 2SA1385 2SB1151 2SA1843
2SD2425 2SC3518 2SD1691 2SC4815
2SA1648 2SA1441 2SA1741
2SC3691 2SC4549
2SA1442 2SA1742
2SC3692 2SC4550
2SA1443 2SA1743
2SC3693 2SC4551
2SA1444 2SA1744
2SC3694 2SC4552
2SA1647
2SC4331 2SA1645
2SA1652
2SC4336
Quick Reference Table by Function/Application
Charac-
teristics
VCEO, IC(DC)
MP-5
(TO-126)
2SB962
16 V, 3 A
20 V, 10 A
25 V, 3 A
30 V, 3 A
30 V, 10 A
60 V, 3 A
2SA1847
2SA1845 2SA1650
60 V, 7 A
60 V, 10 A
60 V, 15 A
100 V, 5 A
100 V, 7 A
100 V, 10 A
60 V, 5 A
∗: Low VCE(sat) & High hFE
■High hFE Transistor
MP-5
(TO-126)
Charac-
teristics
VCEO, IC(DC) SP-8 MP-3 MP-10 MP-45 MP-45F
20 V, 2 A 2SD1583
25 V, 2 A 2SD1581
50 V, 1 A 2SD1582
60 V, 3 A 2SD1584 2SD1694 2SD1593 2SD2164
100 V, 2.5 A 2SC4814∗
100 V, 6 A 2SD1594 2SD2165
100 V, 7.5 A 2SC4813∗2SC4062 2SC4553∗
100 V, 15 A 2SC4063 2SC4554∗
Power Transistor
■Low VCE(sat) Transistor
Transistor
Selection Guide X10679EJHV0SG00 289
SP-8 MP-25 MP-45 MP-80
2SA1460
2SC3733
60 V, 5 A 2SA1069 2SA1394
2SA1008 2SA1395
2SC2331 2SC3567
100 V, 5 A 2SC2517
2SA1010
2SC2334
2SA1396
2SC3568
100 V, 15 A 2SC2750
Quick Reference Table by Function/Application
Characteristics
VCEO, IC(DC)
45 V, 1 A
100 V, 2 A
100 V, 7 A
100 V, 10
■High Voltage, High Speed Switching Transistor
MP-3 MP-40 MP-45 MP-80
2SC2885
200 V, 2 A 2SC2946
2SC2946(1)
350 V, 2 A 2SA1009
2SA1400 2SA1156
2SC3588 2SC2752
2SA1009A
2SC3631 2SC2333
400 V, 5 A 2SC4346 2SC2518 2SC3570
400 V, 7 A 2SC3158 2SC3571
400 V, 10 A 2SC3159 2SC3572 2SC2749
400 V, 15 A 2SC2751
2SA1413 2SA1486
2SC3632 2SC3840
Characteristics
VCEO, IC(DC) MP-5 MP-25
(TO-126) (TO-220)
2SC3569
400 V, 0.5 A
400 V, 2 A
600 V, 2 A
Power Transistor
■Low Voltage, High Speed Switching Transistor
290 Selection Guide X10679EJHV0SG00
Transistor
MP-3 MP-45
45 V, 3 A 2SD794
2SB1094
2SD1585
2SB1097
2SD1588
80 V, 0.8 A 2SD414
80 V, 7 A 2SB708
100 V, 0.8 A 2SD415
2SB768 2SB546A
2SD1033 2SD401A
Quick Reference Table by Function/Application
Characteristics
VCEO, IC(DC)
60 V, 3 A
60 V, 7 A
150 V, 2 A
MP-25
(TO-220)
MP-5
(TO-126)
2SB707
2SD794A
SP-8
40 V, 7 A 2SA1129
120 V, 1.2 A 2SC2690
160 V. 1.2 A 2SC2690A
2SA1546
2SC4001
300 V, 0.2 A 2SC2802 2SC2688 2SC1505
250 V, 0.1 A
Characteristics
VCEO, IC(DC) MP-5
(TO-126) MP-25
(TO-220)
■High Frequency Amplification Transistor
2SC4000
Power Transistor
■Audio Frequency Amplification Transistor
Transistor
Selection Guide X10679EJHV0SG00 291
Quick Reference Table by Function/Application
Power Transistor
■Darlington Transistor
31 V, 2 A 2SD2463∗2SD1695∗
2SD1700∗
2SB963 2SD1630∗
2SD1286
2SD1164 2SB794
2SD985
2SB1150∗
2SD1693∗
60 V, 5 A
2SD1392
∗2SC4351
80 V, 0.8 A 2SD1697
2SB1093 2SB795
2SD1579 2SD986
2SB1149
100 V, 3 A 2SD1692
2SC4342
2SB601 2SA1840 2SD1308 2SB1098 2SB1430
2SD560 2SC4810 2SD1589 2SD2161
2SA1841 2SD1309 2SB1099 2SB1431
2SC4811 2SD1590 2SD2162
2SA1720 2SB1432 2SB897
100 V, 10 A 2SB1100 2SD2163 2SD1210
2SD1591
100 V, 15 A 2SD1296
100 V, 25 A 2SD1297
300 V, 5 A 2SD1592
80 V, 1.5 A
SP-8 MP-3 MP-10 MP-40 MP-45 MP-45F MP-80
MP-5
(TO-126)MP-25
(TO-220)
Charac-
teristics
VCEO, IC(DC)
2SD1843
: High speed darlington transistor, ∗: Internal zener diode between C-B
60 V, 0.8 A
60 V, 1 A
60 V, 1.5 A
60 V, 3 A
100 V, 5 A
100 V, 8 A
292 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
TO-92 30 ±0.5 ±1.5 0.75 10 0.5 0.4 4 0.5 0.6 1.0 Switching
SC-62 30 ±1.0 ±2.0 1.0 10 0.5 0.4 4 0.5 0.6 1.0
SP-8 30 ±1.0 ±2.0 1.0 10 0.5 0.4 4 0.5 0.6 1.0
SST 50 0.1 0.2 0.25 5 0.02 0.03 4 0.02 30 50
SC-59 50 0.1 0.2 0.2 5 0.02 0.03 4 0.02 30 50
TO-92 60 ±1.0 ±2.0 0.75 10 0.5 0.4 4 0.5 — 1.0
SC-62 60 ±2.0 ±4.0 2.0 10 0.5 0.4 4 0.5 — 1.0
SP-8 60 ±1.5 ±3.0 1.0 10 0.5 0.4 4 0.5 — 1.0
SST 50 0.1 0.2 0.25 3 0.01 0.02 2.5 0.005 20 40
SC-59 50 0.1 0.2 0.2 3 0.01 0.02 2.5 0.005 20 40
TO-92 30 ±1.5 ±3.0 0.75 10 0.5 0.4 4 0.5 0.19 0.8
SC-62 30 ±2.0 ±4.0 2.0 10 0.5 0.4 4 0.5 0.19 0.8
TO-92 100 ±0.5 ±1.0 0.75 10 0.5 0.4 4 0.5 0.62 1.2
SC-62 100 ±1.0 ±2.0 2.0 10 0.5 0.4 4 0.5 0.62 1.2
Small Signal FET
■2SK type (MOS type) (1/2)
TYP. MAX.MIN. ID
(A)
VGS
(V)
ID
(A)
VDS
(V)
Pulse
(A)
DC
(A)
VDSS
(V) PT
(W)
ID|yfs| (S) RDS(on) (Ω)
Absolute maximum rating
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
Part
number Package
2SK679A
2SK680A
2SK681A
2SK1132
2SK1133
2SK1272
2SK1273
2SK1274
2SK1398
2SK1399
2SK1482
2SK1483
2SK1484
2SK1485
Applications
2SK1580 SC-70 16 0.1 0.2 0.15 3 0.01 0.02 2.5 0.001 9 15
2SK1581 SC-59 16 0.2 0.4 0.2 3 0.01 0.02 2.5 0.001 3.2 5
2SK1582 SC-59 30 0.2 0.4 0.2 5 0.01 0.02 4 0.01 2.2 5
2SK1583 SC-62 16 ±0.5 ±1.0 2.0 5 0.3 0.4 2.5 0.3 1.2 2.0
2SK1584 SC-62 30 ±0.5 ±1.0 2.0 5 0.3 0.4 2.5 0.3 1.2 2.0
2SK1585 SC-62 16 ±1.0 ±2.0 2.0 5 0.5 0.4 2.5 0.5 0.8 1.2
2SK1586 SC-62 30 ±1.0 ±2.0 2.0 5 0.5 0.4 4 0.5 — 1.0
2SK1587 SC-62 16 ±2.0 ±4.0 2.0 5 1.0 0.4 2.5 1.0 0.55 0.8
2SK1588 SC-62 16 ±3.0 ±6.0 2.0 3 1.0 0.4 2.5 1.0 0.34 0.5
2SK1589 SC-59 100 0.1 0.2 0.2 5 0.01 0.02 4 0.01 19 30
2SK1590 SC-59 60 0.2 0.4 0.2 5 0.01 0.02 4 0.01 3.2 6
2SK1591 SC-59 100 0.2 0.4 0.2 5 0.01 0.02 4 0.01 5.8 8
2SK1592 SC-62 60 ±0.5 ±1.0 2.0 10 0.5 0.4 4 0.5 1.6 2.5
2SK1593 SC-62 100 ±0.5 ±1.0 2.0 10 0.5 0.4 4 0.5 4.0 6.0
2SK1656 SST 30 0.1 0.2 0.25 3 0.01 0.02 2.5 0.01 25 45
2SK1657 SC-59 30 0.1 0.2 0.2 3 0.01 0.02 2.5 0.01 25 45
2SK1658 SC-70 30 0.1 0.2 0.15 3 0.01 0.02 2.5 0.01 25 45
2SK1824 30 0.1 0.2 0.2 3 0.01 0.02 2.5 0.001 7 13
2SK1958 SC-70 16 0.1 0.2 0.15 3 0.01 0.02 1.5 0.001 30 50
2SK1959 SC-62 16 ±2.0 ±4.0 2.0 3 1.0 1.0 1.5 0.05 0.08 0.8
2SK1960 SC-62 16 ±3.0 ±6.0 2.0 3 1.5 2.0 1.5 0.1 0.35 0.8
3-pin ultra
super mini
Transistor
Selection Guide X10679EJHV0SG00 293
Field Effect Transistor
Small Signal FET
■2SK type (MOS type) (2/2)
2SK2053 MP-2 16 ±5±10 2.0 3 2.5 0.4 1.5 0.5 0.2 0.4 Switching
2SK2054 MP-2 60 ±3±6 2.0 10 1.5 2.0 4 1.5 0.18 0.25
2SK2055 MP-2 100 ±2±4 2.0 10 1.0 2.0 4 1.0 0.28 0.45
2SK2070 SP-8 100 ±1±2 2.0 10 1.0 2.0 4 1.0 0.28 0.45
2SK2090 SC-70 50 ±0.1 ±0.2 0.15 3 0.01 0.02 2.5 0.01 20 40
2SK2109 SC-62 60 ±0.5 ±1.0 2.0 10 0.3 0.4 4 0.3 0.55 1.5
2SK2110 SC-62 100 ±0.5 ±1.0 2.0 10 0.3 0.4 4 0.3 0.90 2.0
2SK2111 SC-62 60 ±1.0 ±2.0 2.0 10 0.5 0.4 4 0.5 0.35 1.0
2SK2112 SC-62 100 ±1.0 ±2.0 2.0 10 0.5 0.4 4 0.5 0.67 1.5
2SK2157 MP-2 30 ±5±10 2.0 10 2.5 2.0 4 2.5 0.08 0.15
2SK2158 SC-59 50 0.1 0.2 0.2 3 0.01 0.02 1.5 0.001 21 50
2SK2159 SC-62 60 ±2±4 2.0 10 1.0 0.4 1.5 0.1 0.26 0.7
2SK2541 SST 50 ±0.1 ±0.2 0.2 3 0.01 0.02 1.5 0.001 21 50
2SK2857★SC-62 60 ±4±16 2.0 10 1 1 4 1.5 0.15 0.22
2SK2858★SC-70 30 ±0.1 ±0.4 0.15 3 0.01 0.02 2.5 0.001 10 15
TYP. MAX.MIN. ID
(A)
VGS
(V)
ID
(A)
VDS
(V)
Pulse
(A)
DC
(A)
VDSS
(V) PT
(W)
ID|yfs| (S) RDS(on) (Ω)
Absolute maximum rating
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
Package
Part
number Applications
★: Under development
294 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
Small Signal FET
■2SJ type (MOS type)
TYP. MAX.MIN. ID
(A)
VGS
(V)
ID
(A)
VDS
(V)
Pulse
(A)
DC
(A)
VDSS
(V)
ID|yfs| (S) RDS(on) (Ω)
Absolute maximum rating
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
Package PT
TC =
25 °C
(W)
2SJ165
2SJ166
2SJ178
2SJ179
2SJ180
2SJ184
2SJ185
2SJ196
2SJ197
2SJ198
2SJ199
2SJ202
2SJ203
2SJ204
2SJ205
2SJ206
2SJ207
2SJ208
2SJ209
Part
number Applications
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
SST 50 0.1 0.2 0.25 5 0.02 0.03 4 0.02 22 50 Switching
SC-59 50 0.1 0.2 0.2 5 0.02 0.03 4 0.02 22 50
TO-92 30 1.0 2.0 0.75 10 0.5 0.4 4 0.5 — 1.5
SC-62 30 1.5 3.0 2.0 10 0.5 0.4 4 0.5 — 1.5
SP-8 30 1.0 2.0 1.0 10 0.5 0.4 4 0.5 — 1.5
SST 50 0.1 0.2 0.25 5 0.02 0.02 2.5 0.05 25 40
SC-59 50 0.1 0.2 0.2 5 0.02 0.02 2.5 0.05 25 40
TO-92 60 1.0 2.0 0.75 10 0.5 0.4 4 0.5 0.89 1.5
SC-62 60 1.5 3.0 2.0 10 0.5 0.4 4 0.5 0.89 1.5
TO-92 100 0.5 1.0 0.75 10 0.5 0.4 4 0.5 1.7 2.0
SC-62 100 1.0 2.0 2.0 10 0.5 0.4 4 0.5 1.7 2.0
SC-70 16 0.1 0.2 0.15 3 0.01 0.02 2.5 0.001 — 60
SC-59 16 0.2 0.4 0.2 3 0.01 0.02 2.5 0.001 16 20
SC-59 30 0.2 0.4 0.2 3 0.01 0.02 2.5 0.001 8.8 15
SC-62 16 0.5 1.0 2.0 5 0.3 0.4 2.5 0.3 2.2 5.0
SC-62 30 0.5 1.0 2.0 5 0.3 0.4 2.5 0.3 2.8 3.0
SC-62 16 1.0 2.0 2.0 5 0.5 0.4 2.5 0.5 1.5 2.0
SC-62 16 2.0 4.0 2.0 5 1.0 0.4 2.5 1.0 0.6 1.5
SC-59 100 0.1 0.2 0.2 5 0.01 0.02 4 0.01 60 100
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3-pin ultra
super mini
SC-59 60 0.2 0.4 0.2 5 0.01 0.02 4 0.01 10 15
SC-59 100 0.2 0.4 0.2 5 0.01 0.02 4 0.01 18 30
SC-62 60 0.5 1.0 2.0 10 0.5 0.4 4 0.5 1.8 4.0
SC-62 100 0.5 1.0 2.0 10 0.5 0.4 4 0.5 2.7 5.0
30 0.1 0.2 0.2 3 0.01 0.02 2.5
0.0005
55 100
SP-8 60 1.5 3.0 1.0 10 1 1.0 4 0.8 0.58 0.68
SC-62 30 2 4 2.0 10 1 1.0 4.0 1.0 0.50 0.60
SC-62 60 2 4 2.0 10 1 1.0 4.0 1.0 0.65 0.95
MP-2 30 3 6 2.0 10 1 1.8 4.0 1.5 0.23 0.35
MP-2 60 3 6 2.0 10 1 1.8 4.0 1.5 0.29 0.40
SP-8 30 5 20 1.0 10 2.5 3.0 4 2.5 0.096 0.24
SST 50 0.1 0.2 0.25 3 0.01 0.01 2.5 0.003 75 100
SC-59 50 0.1 0.2 0.2 3 0.01 0.01 2.5 0.003 75 100
MP-2 12 2.5 5.0 2.0 3 1 1.5 2.5 0.5 0.23 0.3
SC-70 30 0.1 0.4 0.15 3 0.01 0.02 2.5 0.001 23 60
–
–
–
–
–
–
–
–
–
–
–
–
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2SJ210
2SJ211
2SJ212
2SJ213
2SJ243
2SJ353
2SJ355
2SJ356
2SJ357
2SJ358
2SJ411
2SJ460
2SJ461
2SJ462
2SJ463A
Transistor
Selection Guide X10679EJHV0SG00 295
Field Effect Transistor
to 20
to 30
to 40
to 50
to 60
to 70
Power MOS FET
■N6-L series Product Map
Drain to source voltage VDSS (V)
60 Package
●: TO-251 (MP-3)
: Isolated TO-220
(MP-45F)
: TO-220AB (MP-25)
( ): RDS(on) MAX (Ω) (@VGS = 10 V/VGS = 4 V)
∗ : (@VGS = 10 V/VGS = 4.5 V)
DC drain
current
ID(DC) (A) 30
2SK2981 (27 m/40 m)∗
2SK2982 (12.5 m/16.5 m)∗
2SK2983 (20 m/27 m)∗
2SK2984 (10 m/13 m)∗
●
●
●
●
2SK3055 (34 m/50 m)
2SK3056 (34 m/50 m)
2SK2057 (17 m/27 m)
2SK3059 (13 m/20 m)
2SK2058 (17 m/27 m)
2SK3060 (13 m/20 m)
2SK3061 (8.5 m/12 m)
2SK3062 (8.5 m/12 m)
2SK2826 (6.5 m/10.5 m)
Drain to source voltage VDSS (V)
100 Package
8.0
10
15
20
25
30
35
40
45
50
●: TO-251 (MP-3)
: Isolated TO-220
(MP-45F)
: TO-220AB (MP-25)
: MP-10
: TO-3P (MP-88)
60
2SK2415 (0.1/0.15)
2SK2413 (70 m/95 m)
2SK2414 (70 m/95 m)
2SK2412 (70 m/95 m)
2SJ492 (0.1/0.19)∗
2SJ494 (50 m/88 m)∗
2SK2723 (40 m/60 m)∗
2SK2410 (40 m/60 m)
2SK2411 (40 m/60 m)
2SJ495 (30 m/56m)∗
2SK2724 (27 m/40 m)∗
2SK2409 (27m/40 m)
2SK2510 (20 m/30 m)∗
2SK2511 (27 m/40 m)∗
2SK2512 (15 m/23 m)∗
2SK2513 (15 m/23 m)∗
2SK2498 (9 m/14 m)∗
2SK2499 (9 m/14 m)∗
2SK2514 (15 m/23 m)∗
2SK2515 (9 m/14 m)∗
2SK2462 (0.14/0.17)
2SK2461 (80 m/0.1)
●
●
( ): RDS(on) MAX (Ω) (@VGS = 10 V/VGS = 4 V)
∗ : N5-L series
DC drain
current
ID(DC) (A)
●
●
●
●
●
●
●
●
●
●
30
2SK2941 (20 m/33 m)∗
■N5-L series/P5-L series/N4-L series Product Map
296 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
2SK1284 (0.32/0.40)
2SK1285 (0.32/0.40)
2SK1852 (0.15/0.20)
2SK1853 (80 m/0.10)
2SK1288 (0.15/0.20)
2SK2131 (0.12/0.20) ]
2SK1289 (0.15/0.20)
2SK1292 (80 m/0.10)
2SK1293 (80 m/0.10)
2SK1295 (50 m/70 m)
2SK1122 (50 m/70 m)
●
●
●
●
●
●
●
●
●
●
Drain to source voltage VDSS (V)
30 100/[150]
Power MOS FET
■N3-L series/P3-L series Product Map
Package
60
~ 4.0
~ 8.0
~ 10
~ 15
~ 20
~ 25
~ 30
~ 40
~ 50
2SK1282 (0.18/0.24)
2SK1283 (0.18/0.24)
2SJ326 (0.37/0.68)
2SJ327 (0.17/0.34)
2SK1748 (0.11/0.16)
2SK1850 (70 m/95 m)
2SK1851 (45 m/60 m)
2SK1286 (70 m/95 m)
2SJ303 (0.1/0.24)
2SJ329 (60 m/0.11)
2SK1287 (70 m/95 m)
2SJ302 (0.1/0.24)
2SJ328 (60 m/0.11)
2SJ330 (50 m/90 m)
2SK1290 (45 m/60 m)
2SJ331 (30 m/55 m)
2SK1294 (27 m/50 m)
2SK1123 (27 m/50 m)
2SK1749 (18 m/25 m)
2SJ324 (0.25/0.52)
2SJ325 (0.11/0.24)
2SK1594 (50 m/80 m)
2SK1596 (20 m/30 m)
●
●
DC drain
current
ID(DC) (A)
: TO-126 (MP-5)
: TO-251 (MP-3)
: Isolated TO-220
(MP-45F)
: TO-220AB (MP-25)
: MP-10
: TO-3P (MP-88)
[
( ): RDS(on) MAX (Ω) (@VGS = 10 V/VGS = 4 V)
●
Transistor
Selection Guide X10679EJHV0SG00 297
Field Effect Transistor
TO-251 20 20 20 m 27 m 30 m 40 m∗860 160
TO-251 30 20 9.8 m 12.5 m 13.2 m 16.5 m∗2290 440
TO-220AB 30 30 50 13 m 20 m 18 m 27 m∗1200 250
TO-220AB 40 60 6.5 m 10 m 8.5 m 13 m∗2600 500
Isolated TO-220 25 25 29 m 45 m 46 m 70 m 790 100
Isolated TO-220 30 25 28 m 34 m 42 m 50 m 990 90
TO-220AB 32 34 28 m 34 m 42 m 50 m 990 90
Isolated TO-220 45 30 14 m 17 m 21 m 27 m 2040 190
TO-220AB 55 58 14 m 17 m 21 m 27 m 2040 190
Isolated TO-220 60 50 30 11 m 13 m 16 m 20 m 2550 250
TO-220AB 70 70 11 m 13 m 16 m 20 m 2550 250
Isolated TO-220 70 35 6.3 m 8.5 m 9.8 m 12 m 5020 460
TO-220AB 70 100 6.3 m 8.5 m 9.8 m 12 m 5020 460
TO-220AB 70 100 5.5 m 6.5 m 7 m 10.5 m 7260 660
Power MOS FET
■N6-L Series (Low Voltage N channel 6th generation Series)
MAX.
(Ω)
TYP.
(Ω)
MAX.
(Ω)
TYP.
(Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part
number Package PT
@TC =
25 °C
(W)
Crss
(pF)
Ciss
(pF)
RDS(on) @VGS = 4 V
2SK2981
2SK2982
2SK2983
2SK2984
2SK3053
2SK3055
2SK3056
2SK3057
2SK3058
2SK3059
2SK3060
2SK3061
2SK3062
2SK2826
∗: VGS = 4.5 V
TO-220AB 30 35 60 14 m 20 m 22 m 33 m 1250 460
Isolated TO-220 25 25 28 m 40 m 45 m 60 m 830 185
Isolated TO-220 35 30 20 m 27 m 33 m 40 m 1200 270
Isolated TO-220 40 35 16 m 20 m 24 m 30 m 1600 350
TO-3P 40 80 22 m 27 m 32 m 40 m 1210 270
Isolated TO-220 45 35 11 m 15 m 16 m 23 m 2100 500
TO-220AB 60 45 75 11 m 15 m 16 m 23 m 2100 500
Isolated TO-220 50 35 7.3 m 9 m 11 m 14 m 3400 770
TO-220AB 50 75 7.3 m 9 m 11 m 14 m 3400 770
TO-3P 50 150 11 m 15 m 16 m 23 m 2100 500
TO-3P 50 150 7.3 m 9 m 11 m 14 m 3400 770
■N5-L Series (Low Voltage N channel 5th generation Series)
MAX.
(Ω)
TYP.
(Ω)
MAX.
(Ω)
TYP.
(Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part
number Package PT
@TC =
25 °C
(W)
Crss
(pF)
Ciss
(pF)
RDS(on) @VGS = 4 V
2SK2941
2SK2723
2SK2724
2SK2510
2SK2511
2SK2512
2SK2513
2SK2498
2SK2499
2SK2514
2SK2515
298 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
TO-220AB –20 70 70 m 0.10 0.12 0.185 1210 180
Isolated TO-220 –16 30 70 m 0.10 0.12 0.185 1210 180
Isolated TO-220 –60 –20 35 39 m 50 m 61 m 88 m 2360 350
Isolated TO-220 –30 35 24 m 30 m 38 m 56 m 4120 580
Power MOS FET
■P5-L Series (Low Voltage P channel 5th generation Series)
MAX.
(Ω)
TYP.
(Ω)
MAX.
(Ω)
TYP.
(Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part
number Package PT
@TC =
25 °C
(W)
Crss
(pF)
Ciss
(pF)
RDS(on) @VGS = 4 V
2SJ492
2SJ493
2SJ494
2SJ495
Isolated TO-220 40 35 21 m 27 m 30 m 40 m 1800 350
Isolated TO-220 30 35 28 m 40 m 40 m 60 m 1300 250
TO-220AB 30 75 28 m 40 m 40 m 60 m 1300 250
Isolated TO-220 60 15 30 53 m 70 m 70 m 0.10 700 150
MP-10 10 1.8∗53 m 70 m 70 m 0.10 700 150
TO-251 10 20 53 m 70 m 70 m 0.10 700 150
TO-251 8.0 20 70 m 0.10 0.11 0.15 440 85
Isolated TO-220 20 35 60 m 80 m 70 m 0.10 1510 140
Isolated TO-220 100 15 30 0.10 0.14 0.12 0.17 870 80
■N4-L Series (Low Voltage N channel 4th generation Series)
MAX.
(Ω)
TYP.
(Ω)
MAX.
(Ω)
TYP.
(Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part
number Package PT
@TC =
25 °C
(W)
Crss
(pF)
Ciss
(pF)
RDS(on) @VGS = 4 V
2SK2409
2SK2410
2SK2411
2SK2412
2SK2413
2SK2414
2SK2415
2SK2461
2SK2462
∗: TA = 25°C
TO-251 –2.0 20 0.20 0.25 0.40 0.52 330 100
TO-251 –30 –4.0 20 85 m 0.11 0.15 0.24 800 250
TO-251 –2.0 20 0.28 0.37 0.50 0.68 320 75
TO-251 –4.0 20 0.13 0.17 0.22 0.34 750 165
Isolated TO-220 –14 35 75 m 0.1 0.17 0.24 1200 290
TO-220AB –16 60 75 m 0.1 0.17 0.24 1200 290
TO-220AB –60 –20 75 48 m 60 m 85 m 0.11 2150 530
Isolated TO-220 –15 35 48 m 60 m 85 m 0.11 2150 530
Isolated TO-220 –20 35 38 m 50 m 65 m 90 m 2570 640
TO-3P –30 150 25 m 30 m 40 m 55 m 4300 1110
■P3-L Series (Low Voltage P channel 3rd generation Series)
MAX.
(Ω)
TYP.
(Ω)
MAX.
(Ω)
TYP.
(Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part
number Package PT
@TC =
25 °C
(W)
Crss
(pF)
Ciss
(pF)
RDS(on) @VGS = 4 V
2SJ324
2SJ325
2SJ326
2SJ327
2SJ303
2SJ302
2SJ328
2SJ329
2SJ330
2SJ331
Transistor
Selection Guide X10679EJHV0SG00 299
Field Effect Transistor
Isolated TO-220 20 30 37 m 50 m 50 m 80 m 1300 280
Isolated TO-220 30 40 35 14 m 20 m 20 m 30 m 3400 960
TO-251 3.0 20 0.15 0.18 0.18 0.24 500 40
TO-126 3.0 20 0.15 0.18 0.18 0.24 500 40
TO-251 8.0 20 80 m 0.11 0.11 0.16 850 350
MP-10 10 1.8∗55 m 70 m 80 m 95 m 1400 130
MP-10 15 1.8∗35 m 45 m 45 m 60 m 2200 180
Isolated TO-220 60 15 30 55 m 70 m 80 m 95 m 1400 130
TO-251 20 60 55 m 70 m 80 m 95 m 1400 130
Isolated TO-220 25 35 35 m 45 m 45 m 60 m 2200 180
Isolated TO-220 40 35 22 m 27 m 30 m 50 m 3250 380
TO-3P 40 100 22 m 27 m 30 m 50 m 3250 380
TO-3P 50 150 16 m 18 m 22 m 25 m 5400 620
TO-251 3.0 20 0.26 0.32 0.32 0.40 500 20
TO-126 3.0 20 0.26 0.32 0.32 0.40 500 20
MP-10 10 1.8∗0.12 0.15 0.15 0.20 1400 50
MP-10 15 1.8∗70 m 80 m 80 m 0.10 2200 90
Isolated TO-220 15 30 0.12 0.15 0.15 0.20 1400 50
TO-220AB 100 20 60 0.12 0.15 0.15 0.20 1400 50
Isolated TO-220 20 35 70 m 80 m 80 m 0.10 2200 90
TO-220AB 30 75 70 m 80 m 80 m 0.10 2200 90
Isolated TO-220 30 35 42 m 50 m 50 m 70 m 3300 200
TO-3P 40 100 42 m 50 m 50 m 70 m 3300 200
Isolated TO-220 150 15 35 0.10 0.12 0.13 0.20 2300 140
Power MOS FET
■N3-L Series (Low Voltage 3rd generation Series)
MAX.
(Ω)
TYP.
(Ω)
MAX.
(Ω)
TYP.
(Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part
number Package PT
@TC =
25 °C
(W)
Crss
(pF)
Ciss
(pF)
RDS(on) @VGS = 4 V
2SK1594
2SK1596
2SK1282
2SK1283
2SK1748
2SK1850
2SK1851
2SK1286
2SK1287
2SK1290
2SK1294
2SK1123
2SK1749
2SK1284
2SK1285
2SK1852
2SK1853
2SK1288
2SK1289
2SK1292
2SK1293
2SK1295
2SK1122
2SK2131
∗: TA = 25°C
300 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
∗1: 250 V ∗2: 450 V
2
4
5
6
7
7.5
8
10
14
20
25
Power MOS FET
■N5-H series Product Map
Drain to source voltage VDSS (V)
600 V Package
●: TO-251 (MP-3)
: Isolated TO-220
(MP-45F)
: TO-220AB (MP-25)
: TO-3P (MP-88)
DC drain
current
ID(DC) (A) 400/500 V
2SK3108 (0.4)
2SK3109 (0.4)
2SK3110 (0.18)
2SK3111 (0.18)
2SK3294 (0.12)∗1★
2SK3112 (0.11)★
●
●
●
●
●
2SK3113 (4.4)
2SK3221 (4.4)
2SK3114 (2.2)
2SK3297 (1.6)★
2SK3115 (1.2)
2SK3116 (1.2)
2SK3298 (0.75)★
2SK3299 (0.75)★
2SK3300 (0.4)★
200/250 V 900 V
●2SK3306 (1.5)★
2SK3305 (1.5)★
2SK3304 (2.0)★
●
●
★: Under development
( ): RDS(on) MAX (Ω) (@VGS = 10 V)
3.0
4.0
4.5
6.0
7.0
8.0
11
13
14
15
16
20
25
●
●
●
■N4-H series/P4-H series Product Map
Drain to source voltage VDSS (V)
[180]/200 [800]/900 Package
450
: TO-251
(MP-3)
: Isolated
TO-220
(MP-45F)
: TO-220AB
(MP-25)
: MP-10
: TO-3P
(MP-88)
600500250
2.0
5.0
10
●
2SJ448 (2.0)
2SJ449 (0.8)
2SK2341 (0.26)
2SK2133 (0.26)
2SK2354 (1.5)
2SK2356 (1.5)
2SK2358 (1.0)
2SK2360 (1.0)
2SK2364 (0.6)
2SK2362 (1.0)
2SK2366 (0.6)
2SK2368 (0.6)
2SK2370 (0.4)
2SK2372 (0.27)
2SK2353 (1.4)
2SK2355 (1.4)
2SK2357 (0.9)
2SK2359 (0.9)
2SK2363 (0.5)
2SK2361 (0.9)
2SK2365 (0.5)
2SK2367 (0.5)
2SK2369 (0.35)
2SK2371 (0.25)
2SK2478 (7.5)
2SK2476 (5.0) ]
2SK2479 (7.5)
2SK2480 (4.0)
2SK2481 (4.0)
2SK2483 (2.8)
(3.5 A)
2SK2482 (4.0)
2SK2484 (2.8)
2SK2485 (2.8)
2SK2486 (2.0)
2SK2487 (1.6)
2SK2477 (1.0) ]
2SK2488 (1.2)
2SK1953 (5.0)
2SK2040 (5.0)
2SK2137 (2.4)
2SK2138 (2.4)
2SK2139 (1.5)
2SK2141 (1.1)
2SK2140 (1.5)
●
●
●
●
●
●
●
●
●
●
●
●
●
DC drain
current
ID(DC) (A)
[
[
●
●
2SK1954 (0.65)
2SK2132 (0.65)
( ): RDS(on) MAX (Ω) (@VGS = 10 V)
2SK1954 (0.65)
2SK2132 (0.65)
2SK2134 (0.4)
2SK2135 (0.18)
2SK2136 (0.18)
Transistor
Selection Guide X10679EJHV0SG00 301
Field Effect Transistor
Drain to source voltage VDSS (V) Package
500
2.0
2.5
3.5
4.0
4.5
5.0
6.0
7.0
8.0
10
12
15
20
25
35
: TO-251
(MP-3)
: Isolated
TO-220
(MP-45F)
: TO-220AB
(MP-25)
: TO-3P
(MP-88)
600 900250 450
2SK1994 (7.5)
2SK1793 (7.5)
2SK1995 (4.0)
2SK2275 (2.8)
2SK1501 (4.0)
2SK1760 (4.0)
2SK1794 (2.8)
2SK1502 (2.0)
2SK1795 (1.6)
2SK1796 (1.2)
●
3.0
2SK1758 (4.2)
2SK1989 (3.0)
2SK1494 (3.0)
2SK1991 (1.5)
2SK1751 (1.5)
2SK1993 (1.0)
2SK1496 (1.0)
2SK2234 (0.6)
2SK1753 (1.0)
2SK1785 (0.7)
2SK1757 (0.6)
2SK1498 (0.4)
2SK1500 (0.27)
2SK1491 (0.15)
2SK1492 (0.10)
2SK1988 (2.8)
2SK1493 (2.8)
2SK1990 (1.4)
2SK1750 (1.4)
2SK1992 (0.9)
2SK1495 (0.9)
2SK1752 (0.9)
2SK1784 (0.6)
2SK1756 (0.5)
2SK1497 (0.35)
2SK1499 (0.25)
DC drain
current
ID(DC) (A)
●
●
●
●
●
●
●
●
( ): RDS(on) MAX (Ω) (@VGS = 10 V)
Power MOS FET
■N3-H series Product Map
●
●
●
302 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
Isolated TO-220 200 8 25 0.33 0.4 400 15
TO-220AB 200 10 50 0.33 0.4 400 15
Isolated TO-220 200 14 35 0.13 0.18 1000 40
TO-220AB 200 20 65 0.13 0.18 1000 40
TO-220AB 200 25 70 0.08 0.11 1600 65
TO-220AB 250 20 70 0.12 0.16 1600 65
TO-220AB 500 5 50 1.35 1.5 570 20
Isolated TO-220 500 5 30 1.35 1.5 570 20
TO-251 600 2 20 3.3 4.4 290 9
Isolated TO-220 600 2 25 3.3 4.4 290 9
Isolated TO-220 600 4 30 1.6 2.2 550 15
Isolated TO-220 600 5 35 1.28 1.6 690 24
Isolated TO-220 600 6 35 0.9 1.2 1100 26
TO-220AB 600 7.5 70 0.9 1.2 1100 26
TO-220AB 600 7.5 40 0.6 0.75 1500 51
TO-220AB 600 10 70 0.6 0.75 1500 51
TO-3P 600 20 150 0.32 0.4 3300 80
TO-3P 900 7 120 1.6 2.0 1500 50
Power MOS FET
■N5-H Series (High Voltage N channel 5th generation Series)
MAX. (Ω)TYP. (Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part number Package PT
(W) Qg
(nC)
Ciss
(pF)
2SK3108
2SK3109
2SK3110
2SK3111
2SK3112
2SK3294★
2SK3305★
2SK3306★
2SK3113
2SK3221
2SK3114
2SK3297★
2SK3115
2SK3116
2SK3298★
2SK3299★
2SK3300★
2SK3304★
★: Under development
Transistor
Selection Guide X10679EJHV0SG00 303
Field Effect Transistor
TO-251 4.0 20 0.52 0.65 300 10
MP-10 180 4.0 1.8∗0.52 0.65 300 10
TO-220AB 13 70 0.32 0.40 540 15
Isolated TO-220 200 14 35 0.14 0.18 1100 30
TO-220AB 20 75 0.14 0.18 1100 30
Isolated TO-220 11 35 0.21 0.26 1090 33
TO-220AB 250 16 75 0.21 0.26 1090 25
Isolated TO-220 4.5 30 1.0 1.4 670 20
TO-220AB 5.0 50 1.0 1.4 670 20
Isolated TO-220 6.0 35 0.7 0.9 1050 27
TO-220AB 7.0 75 0.7 0.9 1050 27
TO-3P 10 100 0.7 0.9 1050 26
Isolated TO-220 450 8.0 35 0.4 0.5 1600 42
TO-220AB 10 75 0.4 0.5 1600 42
TO-3P 15 120 0.4 0.5 1600 43
TO-3P 20 120 0.28 0.40 2400 65
TO-3P 25 160 0.20 0.25 3600 95
Power MOS FET
■N4-H Series (High Voltage N channel 4th generation Series) (1/2)
MAX. (Ω)TYP. (Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part number Package PT
(W) Qg
(nC)
Ciss
(pF)
2SK1954
2SK2132
2SK2134
2SK2135
2SK2136
2SK2341
2SK2133
2SK2353
2SK2355
2SK2357
2SK2359
2SK2361
2SK2363
2SK2365
2SK2367
2SK2369
2SK2371
∗: TA = 25°C
Isolated TO-220 4.5 30 1.1 1.5 670 20
TO-220AB 5.0 50 1.1 1.5 670 20
Isolated TO-220 6.0 35 0.8 1.0 1050 27
TO-220AB 7.0 75 0.8 1.0 1050 27
TO-3P 10 100 0.8 1.0 1050 26
Isolated TO-220 500 8.0 35 0.5 0.6 1600 42
TO-220AB 10 75 0.5 0.6 1600 42
TO-3P 15 120 0.5 0.6 1600 43
TO-3P 20 120 0.32 0.40 2400 65
TO-3P 25 160 0.22 0.27 3600 95
Isolated TO-220 2.0 25 4.2 5.0 275 12
TO-251 2.0 20 4.2 5.0 275 12
Isolated TO-220 4.0 30 2.0 2.4 550 20
TO-220AB 600 5.0 70 2.0 2.4 550 20
Isolated TO-220 5.0 35 1.25 1.5 930 30
Isolated TO-220 6.0 40 0.9 1.1 1150 40
TO-220AB 7.0 75 1.25 1.5 930 30
2SK2354
2SK2356
2SK2358
2SK2360
2SK2362
2SK2364
2SK2366
2SK2368
2SK2370
2SK2372
2SK1953
2SK2040
2SK2137
2SK2138
2SK2139
2SK2141
2SK2140
Isolated TO-220 3.0 40 3.4 5.0 590 20
TO-3P 800 10 150 0.65 1.0 2950 90
Isolated TO-220 2.0 30 5.0 7.5 485 17
TO-220AB 3.0 70 5.6 7.5 485 17
Isolated TO-220 900 3.0 35 3.2 4.0 900 30
TO-220AB 4.0 75 3.2 4.0 900 30
2SK2476
2SK2477
2SK2478
2SK2479
2SK2480
2SK2481
304 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
TO-3P 5.0 100 3.2 4.0 900 30
Isolated TO-220 3.5 40 2.2 2.8 1200 40
TO-220AB 5.0 75 2.2 2.8 1200 40
TO-3P 900 6.0 100 2.2 2.8 1200 40
TO-3P 7.0 120 1.4 2.0 1830 55
TO-3P 8.0 140 1.1 1.6 2100 65
TO-3P 10 160 1.0 1.2 2900 90
Power MOS FET
■N4-H Series (High Voltage N channel 4th generation Series) (2/2)
MAX. (Ω)TYP. (Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part number Package PT
(W) Qg
(nC)
Ciss
(pF)
2SK2482
2SK2483
2SK2484
2SK2485
2SK2486
2SK2487
2SK2488
Isolated TO-220 –250 4.0 30 1.5 2.0 470 15
Isolated TO-220 –250 6.0 35 0.55 0.8 1040 23.4
■P4-H Series (High Voltage P channel 4th generation Series)
MAX. (Ω)TYP. (Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part number Package PT
(W) Qg
(nC)
Ciss
(pF)
2SJ448
2SJ449
±
±
Transistor
Selection Guide X10679EJHV0SG00 305
Field Effect Transistor
TO-3P 250 25 120 0.12 0.15 1950 55
TO-3P 250 35 140 0.08 0.1 3000 80
Isolated TO-220 450 2.5 30 2.2 2.8 350 12
TO-220AB 450 3 50 2.2 2.8 350 12
Isolated TO-220 450 4.5 30 1.1 1.4 610 22
TO-220AB 450 5 50 1.1 1.4 610 22
Isolated TO-220 450 6 35 0.7 0.9 1060 36
TO-220AB 450 7 70 0.7 0.9 1060 36
TO-3P 450 10 100 0.7 0.9 1060 36
TO-3P 450 12 100 0.5 0.6 1330 46
TO-3P 450 15 120 0.4 0.5 1500 50
TO-3P 450 20 120 0.28 0.35 2460 85
TO-3P 450 25 160 0.2 0.25 3300 115
Isolated TO-220 500 2.5 30 2.4 3 350 12
TO-220AB 500 3 50 2.4 3 350 12
Isolated TO-220 500 4.5 30 1.2 1.5 610 22
TO-220AB 500 5 50 1.2 1.5 610 22
Isolated TO-220 500 6 35 0.8 1 1060 36
TO-220AB 500 7 70 0.8 1 1500 57
Isolated TO-220 500 8 40 0.5 0.6 1060 36
Power MOS FET
■N3-H Series (High Voltage N channel 3rd generation Series)
MAX. (Ω)TYP. (Ω)
ID(DC)
(A)
VDSS
(V)
RDS(on) @VGS = 10 V
Absolute maximum ratings Electrical characteristics
Part number Package PT
(W) Qg
(nC)
Ciss
(pF)
2SK1491
2SK1492
2SK1988
2SK1493
2SK1990
2SK1750
2SK1992
2SK1495
2SK1752
2SK1784
2SK1756
2SK1497
2SK1499
2SK1989
2SK1494
2SK1991
2SK1751
2SK1993
2SK1496
2SK2234
TO-3P 500 10 100 0.8 1 1060 36
TO-3P 500 12 100 0.6 0.7 1330 46
TO-3P 500 15 120 0.5 0.6 1500 50
TO-3P 500 20 120 0.32 0.4 2460 85
TO-3P 500 25 160 0.22 0.27 3300 115
Isolated TO-220 600 2 30 2.8 4.2 360 17
Isolated TO-220 900 2 30 5.5 7.5 430 15.5
TO-220AB 900 3 75 5.5 7.5 430 19
Isolated TO-220 900 3 35 3 4 790 28
Isolated TO-220 900 3.5 35 2.2 2.8 1000 42
TO-220AB 900 4 70 2.8 4 790 33
TO-3P 900 5 100 3.1 4 790 34
TO-3P 900 6 100 2.4 2.8 1000 42
TO-3P 900 7 120 1.7 2 1550 80
TO-3P 900 8 140 1.3 1.6 1740 66
TO-3P 900 10 150 1 1.2 2500 90
TO-3P 1400 5 240 3.5 4 1800 125
2SK1753
2SK1785
2SK1757
2SK1498
2SK1500
2SK1758
2SK1994
2SK1793
2SK1995
2SK2275
2SK1501
2SK1760
2SK1794
2SK1502
2SK1795
2SK1796
2SK1271∗
∗: 2nd Generation
306 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
µ
PA1750 (P-ch Dual)
µ
PA1710 (P-ch Single)
µ
PA1710A (P-ch Single)
µ
PA1754 (N-ch Dual)
µ
PA1713 (P-ch Single)
µ
PA1711 (P-ch Single)
µ
PA1751 (N-ch Dual)
µ
PA1714 (P-ch Single)
µ
PA1755 (N-ch Dual)
µ
PA1758 (N-ch Dual)∗1
µ
PA1700 (N-ch Single)
µ
PA1700A (N-ch Single)
µ
PA1712 (P-ch Single)
µ
PA1716 (P-ch Single)
µ
PA1705 (N-ch Single)∗2
µ
PA1702 (N-ch Single)
µ
PA1703 (N-ch Single)
µ
PA1704 (N-ch Single)
µ
PA1706 (N-ch Single)
µ
PA1707 (N-ch Single)
µ
PA1715 (P-ch Single)
Drain to source voltage VDSS (V)
up to 600
up to 150
up to 90
up to 70
up to 50
up to 40
up to 30
up to 20
up to 10
Power MOS FET
■8-pin SOP Type Power MOS FET
On-Resistance
RDS (on) (mΩ) (TYP.)
@VGS = 10 V 30
20
µ
PA1752 (N-ch Dual)∗1
µ
PA1753 (N-ch Dual)∗1
µ
PA1756 (N-ch Dual)∗1
µ
PA1701 (N-ch Single)∗1
µ
PA1701A (N-ch Single)
µ
PA1757 (N-ch Dual)∗1
∗1: 2.5 V drive is possible. Otherwise 4 V drive is possible. ∗2: 4.5 V drive
µ
PA1790 (Nch + Pch)
µ
PA1759 (Nch Dual)
60
Transistor
Selection Guide X10679EJHV0SG00 307
Field Effect Transistor
µ
PA1700
µ
PA1700A
µ
PA1701
µ
PA1701A
µ
PA1702
µ
PA1703
µ
PA1704
µ
PA1705
µ
PA1706
µ
PA1707
µ
PA1710
µ
PA1710A
µ
PA1711
µ
PA1712
µ
PA1713
µ
PA1714
µ
PA1715
µ
PA1716
µ
PA1750
µ
PA1751
µ
PA1752
µ
PA1753
µ
PA1754
µ
PA1755
µ
PA1756
µ
PA1757
µ
PA1758
µ
PA1759
µ
PA1790
ID
(A)
VGS
(V)
Pulse
(A)
DC
(A) TYP. MAX.
PT
TC = 25 °C
(W)
VDSS
(V)
IDRDS(on) (Ω)
Absolute maximum rating
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
Configuration Applications
Part number
∗1: TA = 25°C, Mounted on ceramic substrate of 1200 mm2 × 0.7 mm
∗2: TA = 25°C, 2 circuits, Mounted on ceramic substrate of 2000 mm2 × 1.1 mm
30
30
20
20
30
30
30
30
30
30
–30
–30
–30
–30
30
–30
–30
–30
–30
30
20
20
30
–30
30
20
30
60
60/–60
±7
±7
±7
±7
±8
±10
±
10
±
7
±13
±
10
5
5
7
8
5
7
11
8
3.5
±5
±5
±6
±7
±
7
±
6
±
7
±
6
±5
±1.0/±0.7
±28
±28
±28
±28
±32
±40
±40
±28
±52
±40
20
20
28
32
20
28
44
32
14
±20
±20
±24
±28
±28
±24
±28
±24
±20
±4.0/±2.8
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗1
2.0∗2
2.0∗2
2.0∗2
2.0∗2
2.0∗2
2.0∗2
2.0∗2
2.0∗2
2.0∗2
2.0∗2
1.0∗2
4
4
2.5
2.5
4
4
2.5
4.5
4
4
–4
–4
–4
–4
–4
–4
–4.5
–4.5
–4
4
2.5
2.5
4
4.5
2.5
2.5
2.5
10
10
3.5
3.5
3.5
3.5
4
5.0
5.0
3.5
7.0
5.0
–2.5
–2.0
–3.5
–
4.0
2.5
3.5
–6.0
–4
–1.8
2.5
2.5
3.0
3.5
3.5
3.0
3.5
3.0
2.5
0.5/0.35
0.040
0.028
0.03
0.026
0.018
0.012
0.0125
0.031
0.008
0.014
0.11
0.091
0.049
0.027
0.10
0.049
0.011
0.017
0.125
0.044
0.042
0.028
0.029
0.028
0.028
0.022
0.026
0.11
0.12/0.44
0.050
0.05
0.04
0.04
0.025
0.017
0.016
0.04
0.012
0.021
0.16
0.16
0.07
0.048
0.16
0.07
0.016
0.023
0.18
0.064
0.061
0.04
0.053
0.045
0.04
0.032
0.04
0.15
0.26/0.6
N-ch Single
N-ch Single
N-ch Single
N-ch Single
N-ch Single
N-ch Single
N-ch Single
N-ch Single
N-ch Single
N-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch Dual
N-ch + P-ch
Switching
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
Power MOS FET
■Power SOP8 series
308 Selection Guide X10679EJHV0SG00
Transistor
Field Effect Transistor
Power MOS FET
■8-pin TSSOP Type Power MOS FET
Drain to source voltage VDSS (V)
On-Resistance
RDS(on) (mΩ) (MAX.)
@VGS = 4.5 V 30
12
★: Under development
20
~210
~190
~115
~75
~60
~40
~30
~25
µ
PA1850 (P-ch Dual)
µ
PA1854 (P-ch Dual)
µ
PA1810 (P-ch Single)
µ
PA1813 (P-ch Single)
µ
PA1851 (P-ch Dual)
µ
PA1811 (P-ch Single)
µ
PA1852 (N-ch Dual)
µ
PA1801 (N-ch Single)
µ
PA1855 (N-ch Dual)★
µ
PA1802 (N-ch Single)
µ
PA1815 (P-ch Single)★
µ
PA1853 (P-ch Dual)
µ
PA1812 (P-ch Single)
µ
PA1800 (N-ch Single)
µ
PA1814 (P-ch Single)★
µ
PA1803 (N-ch Single)★
∗: Mounted on ceramic substrate of 50 cm2 × 1.1 mm
ID(DC)
(A)
VGSS
(V) PT
(W)
VDSS
(V) RDS(on) (mΩ) MAX.
Absolute maximum rating
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
ConfigurationPart number ∗Applications
µ
PA1800
µ
PA1801
µ
PA1802
µ
PA1803★
µ
PA1810
µ
PA1811
µ
PA1812
µ
PA1813
µ
PA1814★
µ
PA1815★
µ
PA1850
µ
PA1851
µ
PA1852
µ
PA1853
µ
PA1854
µ
PA1855★
45
25
25
–
60
80
90
30
–
23
130
250
45
220
70
24
30
20
20
30
–12
–20
–30
–12
–30
–20
–12
–20
20
–30
–12
20
±20
±8
±12
±20
–10/+5
–12/+5
–20/+5
–10/+5
–20/+5
–12/+3
–10/+5
–20/+5
±12
–20/+5
–10/+5
±12
±5
±6
±7
±7
±4
±4
±5
±5
±7
±7
±2.5
±2.5
±5
±2.5
±2.5
±6
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
–
34
32
–
100
120
–
40
–
30
200
–
60
–
105
29
39
24
23
16
55
75
70
25
30
22
115
210
40
190
60
23
N-ch Single
N-ch Single
N-ch Single
N-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Single
P-ch Dual
P-ch Dual
N-ch Dual
P-ch Dual
P-ch Dual
N-ch Dual
VGS = 2.5 V
VGS = 4 V
VGS = 10 V
27
–
–
21
–
–
40
–
19
–
–
105
–
85
–
–
Switching
VGS = 4.5 V
■8-pin TSSOP Type Power MOS FET
★: Under development
Transistor
Selection Guide X10679EJHV0SG00 309
AA1A4M BA1A4M
AA1A4P BA1A4P
AA1F4M BA1F4M
AA1F4N BA1F4N
AA1L4M BA1L4M
AA1L4L BA1L4L
AA1L3Z BA1L3Z
AA1A4Z BA1A4Z
AA1F4Z BA1F4Z
AA1L4Z BA1L4Z
AA1L3M BA1L3M
AA1L3N BA1L3N
AA1A3Q BA1A3Q
AN1A4M BN1A4M
AN1A4P BN1A4P
AN1F4M BN1F4M
AN1F4N BN1F4N
AN1L4M BN1L4M
AN1L4L BN1L4L
AN1L3Z BN1L3Z
AN1A4Z BN1A4Z
AN1F4Z BN1F4Z
AN1L4Z BN1L4Z
AN1L3M BN1L3M
AN1L3N BN1L3N
AN1A3Q BN1A3Q
60 50 10 100 250 150
60 50 5 100 250 150
60 50 10 100 250 150
60 50 5 100 250 150
60 50 10 100 250 150
60 50 15 100 250 150
60 50 5 100 250 150
60 50 5 100 250 150
60 50 5 100 250 150
60 50 5 100 250 150
60 50 10 100 250 150
60 50 5 100 250 150
60 50 5 100 250 150
–60 –50 –10 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –10 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –10 –100 250 150
–60 –50 –15 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –10 –100 250 150
–60 –50 –5 –100 250 150
–60 –50 –5 –100 250 150
10 10 35 to 100 5.0 5.0
10 47 35 to 340 5.0 5.0
22 22 60 to 195 5.0 5.0
22 47 85 to 340 5.0 5.0
47 47 85 to 340 5.0 5.0
47 22 60 to 195 5.0 5.0
4.7 – 135 to 600 5.0 5.0
10 – 135 to 600 5.0 5.0
22 – 135 to 600 5.0 5.0
47 – 135 to 600 5.0 5.0
4.7 4.7 20 to 80 5.0 5.0
4.7 10 35 to 100 5.0 5.0
1.0 10 35 to 100 5.0 5.0
10 10 35 to 100 –5.0 –5.0
10 47 85 to 340 –5.0 –5.0
22 22 60 to 195 –5.0 –5.0
22 47 85 to 340 –5.0 –5.0
47 47 85 to 340 –5.0 –5.0
47 22 60 to 195 –5.0 –5.0
4.7 – 135 to 600 –5.0 –5.0
10 – 135 to 600 –5.0 –5.0
22 – 135 to 600 –5.0 –5.0
47 – 135 to 600 –5.0 –5.0
4.7 4.7 20 to 80 –5.0 –5.0
4.7 10 35 to 100 –5.0 –5.0
1.0 10 35 to 100 –5.0 –5.0
Part number
TO-92 SST
Refer to
equivalent
circuit A
Switching
Refer to
equivalent
circuit B
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (mA) (mW) (°C)
Absolute maximum ratings
(TA = 25 °C) R1R2hFE VCE IC
(kΩ)(kΩ) (V) (mA) Remarks
Electrical characteristics
(TA = 25 °C)
■AA1[ ], AN1[ ], BA1[ ], BN1[ ] series (TO-92, SST)
Equivalent
circuit and
applications
Transistor with Internal Resistor
■Equivalent circuit
C
E
R
2
R
1
B
AC
E
R
2
R
1
B
BC
E
R
2
R
1
B
CC
E
R
2
R
1
B
DC
E
R
2
R
1
B
E
310 Selection Guide X10679EJHV0SG00
Transistor
AB1A4A BB1A4A
AB1L2Q BB1L2Q
AB1A3M BB1A3M
AB1F3P BB1F3P
AB1J3P BB1J3P
AB1L3N BB1L3N
AB1A4M BB1A4M
AP1A4A BP1A4A
AP1L2Q BP1L2Q
AP1A3M BP1A3M
AP1F3P BP1F3P
AP1J3P BP1J3P
AP1L3N BP1L3N
AP1A4M BP1A4M
30 25 10 0.7 750 250
30 25 10 0.7 750 250
30 25 10 0.7 750 250
30 25 10 0.7 750 250
30 25 10 0.7 750 250
30 25 10 0.7 750 250
30 25 10 0.7 750 250
–25 –25 –10 –0.7 750 250
–25 –25 –10 –0.7 750 250
–25 –25 –10 –0.7 750 250
–25 –25 –10 –0.7 750 250
–25 –25 –10 –0.7 750 250
–25 –25 –10 –0.7 750 250
–25 –25 –10 –0.7 750 250
150 – 10 300 ~ 2.0 0.5
150 0.47 4.7 300 ~ 2.0 0.5
150 1.0 1.0 100 ~ 2.0 0.5
150 2.2 10 300 ~ 2.0 0.5
150 3.3 10 300 ~ 2.0 0.5
150 4.7 10 300 ~ 2.0 0.5
150 10 10 300 ~ 2.0 0.5
150 – 10 100 ~ –2.0 –0.5
150 0.47 4.7 100 ~ –2.0 – 0.5
150 1.0 1.0 100 ~ –2.0 –0.5
150 2.2 10 100 ~ –2.0 –0.5
150 3.3 10 100 ~ –2.0 –0.5
150 4.7 10 100 ~ –2.0 –0.5
150 10 10 100 ~ –2.0 – 0.5
Part number
TO-92 SST
Absolute maximum ratings
(TA = 25 °C)
VCBO VCEO VEBO ICPT (mW) T j
(V) (V) (V) (A) TO-92 SST (°C)
Refer to
equivalent
circuit B
Switching
Refer to
equivalent
circuit A
Switching
Electrical characteristics
(TA = 25 °C)
R1R2hFE VCE IC
(kΩ)(kΩ) (V) (A) Re-
marks
Equivalent
circuit and
applications
Transistor with Internal Resistor
■AB1[ ], AP1[ ], BB1[ ], BP1[ ] series (TO-92, SST)
– 10 150 ~ –2.0 –1.0
0.22 2.2 150 ~ –2.0 –1.0
0.47 1.0 150 ~ –2.0 –1.0
0.47 4.7 150 ~ –2.0 –1.0
1.0 1.0 150 ~ –2.0 –1.0
2.2 2.2 150 ~ –2.0 –1.0
4.7 10 150 ~ –2.0 –1.0
■AQ1[ ] series (TO-92)
Part number
TO-92 VCBO VCEO VEBO ICPTTj
(V) (V) (V) (A) (mW) (°C)
Refer to
equivalent
circuit B
Switching
–20 –20 –10 –2.0 750 150
–20 –20 –10 –2.0 750 150
–20 –20 –10 –2.0 750 150
–20 –20 –20 –10 750 150
–20 –20 –10 –2.0 750 150
–20 –20 –10 –2.0 750 150
–20 –20 –10 –2.0 750 150
R1R2hFE VCE IC
(kΩ) (kΩ) (V) (A) Remarks
Absolute maximum ratings
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
AQ1A4A
AQ1F2Q
AQ1L2N
AQ1L2Q
AQ1A3M
AQ1F3M
AQ1F3P
Equivalent
circuit and
applications
Transistor
Selection Guide X10679EJHV0SG00 311
1.0 1.0 200 ~ 2.0 0.5
2.2 10 300 ~ 2.0 0.5
4.7 10 300 ~ 2.0 0.5
10 10 300 ~ 2.0 0.5
0.47 4.7 300 ~ 2.0 0.5
0.22 2.2 300 ~ 2.0 0.5
– 10 300 ~ 2.0 0.5
1.0 1.0 200 ~ 2.0 0.5
2.2 10 300 ~ 2.0 0.5
4.7 10 300 ~ 2.0 0.5
10 10 300 ~ 2.0 0.5
0.47 4.7 300 ~ 2.0 0.5
0.22 2.2 300 ~ 2.0 0.5
– 10 300 ~ 2.0 0.5
1.0 1.0 100 ~ –2.0 –0.5
2.2 10 100 ~ –2.0 –0.5
4.7 10 100 ~ –2.0 –0.5
10 10 100 ~ –2.0 –0.5
0.47 4.7 100 ~ –2.0 –0.5
0.22 2.2 100 ~ –2.0 –0.5
– 10 100 ~ –2.0 –0.5
■AD1[ ], AD2[ ], AR1[ ] series (TO-92)
AD1A3M
AD1F3P
AD1L3N
AD1A4M
AD1L2Q
AD1F2Q
AD1A4A
AD2A3M
AD2F3P
AD2L3N
AD2A4M
AD2L2Q
AD2F2Q
AD2A4A
AR1A3M
AR1F3P
AR1L3N
AR1A4M
AR1L2Q
AR1F2Q
AR1A4A
Part number
TO-92
Absolute maximum ratings
(TA = 25 °C)
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (A) (mW) (°C)
Refer to
equivalent
circuit C
Switching
Refer to
equivalent
circuit A
Switching
Electrical characteristics
(TA = 25 °C)
80 60 10 1.0 750 150
80 60 10 1.0 750 150
80 60 10 1.0 750 150
80 60 10 1.0 750 150
80 60 10 1.0 750 150
80 60 10 1.0 750 150
80 60 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
60 ±10 60 ±10 10 1.0 750 150
–60 –60 –10 –1.0 750 150
–60 –60 –10 –1.0 750 150
–60 –60 –10 –1.0 750 150
–60 –60 –10 –1.0 750 150
–60 –60 –10 –1.0 750 150
–60 –60 –10 –1.0 750 150
–60 –60 –10 –1.0 750 150
R1R2hFE VCE IC
(kΩ)(kΩ) (V) (A) Remarks
Refer to
equivalent
circuit B
Switching
Equivalent
circuit and
applications
Transistor with Internal Resistor
60 ±10 60 ±10 15 ±2.0 1.0 150
60 ±10 60 ±10 15 ±2.0 1.0 150
60 ±10 60 ±10 15 ±2.0 1.0 150
60 60 15 ±2.0 1.0 150
60 60 15 ±2.0 1.0 150
1.0 10 1000 to 3000 5.0 1.0
2.2 10 1000 to 3000 5.0 1.0
0.68 10 1000 to 3000 5.0 1.0
1.0 10 1000 to 3000 5.0 1.0
1.0 10 1000 to 3000 5.0 1.0
Absolute maximum ratings
(TA = 25 °C)
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (A) (W) (°C)
Electrical characteristics
(TA = 25 °C)
R1R2hFE VCE IC
(kΩ)(kΩ) (V) (A)
CE1A3Q
CE1F3P
CE1N2R
CE2A3Q
CE2F3P
Refer to D
Refer to E
■CE1[ ], CE2[ ] series (SP-8)
Equivalent
circuit and
applications
Part number
SP-8
312 Selection Guide X10679EJHV0SG00
Transistor
60 50 10 100 150 10 10 35 to 100 5.0 5.0
60 50 5 100 150 10 47 35 to 340 5.0 5.0
60 50 10 100 150 22 22 60 to 195 5.0 5.0
60 50 5 100 150 22 47 85 to 340 5.0 5.0
60 50 10 100 200 150 47 47 85 to 340 5.0 5.0
60 50 15 100 (SC-59) 150 47 22 60 to 195 5.0 5.0
60 50 5 100 150 4.7 – 135 to 600 5.0 5.0
60 50 5 100 150 150 10 – 135 to 600 5.0 5.0
60 50 5 100 (SC-70) 150 22 – 135 to 600 5.0 5.0
60 50 5 100 150 47 – 135 to 600 5.0 5.0
60 50 10 100 150 4.7 4.7 20 to 80 5.0 5.0
60 50 5 100 150 4.7 10 35 to 100 5.0 5.0
60 50 5 100 150 1.0 10 35 to 100 5.0 5.0
–60 –50 –10 –100 150 10 10 35 to 100 –5.0 –5.0
–60 –50 –5 –100 150 10 47 85 to 340 –5.0 –5.0
–60 –50 –10 –100 150 22 22 60 to 195 –5.0 –5.0
–60 –50 –5 –100 150 22 47 85 to 340 –5.0 –5.0
–60 –50 –10 –100 200 150 47 47 85 to 340 –5.0 –5.0
–60 –50 –15 –100 (SC-59) 150 47 22 60 to 195 –5.0 –5.0
–60 –50 –5 –100 150 4.7 – 135 to 600 –5.0 –5.0
–60 –50 –5 –100 150 150 10 – 135 to 600 –5.0 –5.0
–60 –50 –5 –100 (SC-70) 150 22 – 135 to 600 –5.0 –5.0
–60 –50 –5 –100 150 47 – 135 to 600 –5.0 –5.0
–60 –50 –10 –100 150 4.7 4.7 20 to 80 –5.0 –5.0
–60 –50 –5 –100 150 4.7 10 35 to 100 –5.0 –5.0
–60 –50 –5 –100 150 1.0 10 35 to 100 –5.0 –5.0
■FA1[ ], FN1[ ], GA1[ ], GN1[ ] series (SC-59, SC-70)
Part number
SC-59 SC-70
Absolute maximum ratings
(TA = 25 °C)
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (mA) (mW) (°C)
Electrical characteristics
(TA = 25 °C)
R1R2hFE VCE IC
(kΩ)(kΩ) (V) (mA) Remarks
Refer to
equivalent
circuit B
Switching
Equivalent
circuit and
applications
FA1A4M GA1A4M
FA1A4P GA1A4P
FA1F4M GA1F4M
FA1F4N GA1F4N
FA1L4M GA1L4M
FA1L4L GA1L4L
FA1L3Z GA1L3Z
FA1A4Z GA1A4Z
FA1F4Z GA1F4Z
FA1L4Z GA1L4Z
FA1L3M GA1L3M
FA1L3N GA1L3N
FA1A3Q GA1A3Q
FN1A4M GN1A4M
FN1A4P GN1A4P
FN1F4M GN1F4M
FN1F4N GN1F4N
FN1L4M GN1L4M
FN1L4L GN1L4L
FN1L3Z GN1L3Z
FN1A4Z GN1A4Z
FN1F4Z GN1F4Z
FN1L4Z GN1L4Z
FN1L3M GN1L3M
FN1L3N GN1L3N
FN1A3Q GN1A3Q
Refer to
equivalent
circuit A
Switching
Transistor with Internal Resistor
■FB1[ ] series (SC-59)
Part number
Absolute maximum ratings
(TA = 25 °C)
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (A) (mW) (°C)
Electrical characteristics
(TA = 25 °C)
R1R2hFE VCE IC
(kΩ)(kΩ) (V) (A) Remarks
Equivalent
circuit and
applications
FB1A4A
FB1L2Q
FB1A3M
FB1F3P
FB1J3P
FB1L3N
FB1A4M
FP1A4A
FP1L2Q
FP1A3M
FP1F3P
FP1J3P
FP1L3N
FP1A4M
Refer to
equivalent
circuit A
Switching
Refer to
equivalent
circuit B
Switching
30 25 10 0.7 150 – 10 300 2.0 0.5
30 25 10 0.7 150 0.47 4.7 300 2.0 0.5
30 25 10 0.7 150 1.0 1.0 100 2.0 0.5
30 25 10 0.7 200 150 2.2 10 300 2.0 0.5
30 25 10 0.7 150 3.3 10 300 2.0 0.5
30 25 10 0.7 150 4.7 10 300 2.0 0.5
30 25 10 0.7 150 10 10 300 2.0 0.5
–25 –25 –10 –0.7 150 10 100 –2.0 –0.5
–25 –25 –10 –0.7 150 0.47 4.7 100 –2.0 –0.5
–25 –25 –10 –0.7 150 1.0 1.0 100 –2.0 –0.5
–25 –25 –10 –0.7 200 150 2.2 10 100 –2.0 –0.5
–25 –25 –10 –0.7 150 3.3 10 100 –2.0 –0.5
–25 –25 –10 –0.7 150 4.7 10 100 –2.0 –0.5
–25 –25 –10 –0.7 150 10 10 100 –2.0 –0.5
Transistor
Selection Guide X10679EJHV0SG00 313
■HD1[ ], HD2[ ], HR1[ ] series (SOT-89)
Part number
Absolute maximum ratings
(TA = 25 °C) Electrical characteristics
(TA = 25 °C)
Equivalent
circuit and
applications
HD1A3M
HD1F3P
HD1L3N
HD1A4M
HD1L2Q
HD1F2Q
HD1A4A
HD2A3M
HD2F3P
HD2L3N
HD2A4M
HD2L2Q
HD2F2Q
HD2A4A
HR1A3M
HR1F3P
HR1L3N
HR1A4M
HR1L2Q
HR1F2Q
HR1A4A
Refer to
equivalent
circuit A
Switching
Refer to
equivalent
circuit B
Switching
80 60 10 1.0 150 1.0 1.0 200 2.0 0.5
80 60 10 1.0 150 2.2 10 300 2.0 0.5
80 60 10 1.0 150 4.7 10 300 2.0 0.5
80 60 10 1.0 2.0 150 10 10 300 2.0 0.5
80 60 10 1.0 150 0.47 4.7 300 2.0 0.5
80 60 10 1.0 150 0.22 2.2 300 2.0 5.0
80 60 10 1.0 150 – 10 300 2.0 0.5
60±10 60±10 10 1.0 150 1.0 1.0 200 2.0 0.5
60±10 60±10 10 1.0 150 2.2 10 300 2.0 0.5
60±10 60±10 10 1.0 150 4.7 10 300 2.0 0.5
60±10 60±10 10 1.0 2.0 150 10 10 300 2.0 0.5
60±10 60±10 10 1.0 150 0.47 4.7 300 2.0 0.5
60±10 60±10 10 1.0 150 0.2 2.2 300 2.0 0.5
60±10 60±10 10 1.0 150 – 10 300 2.0 0.5
–60 –60 –10 –1.0 150 1.0 1.0 100 –2.0 –0.5
–60 –60 –10 –1.0 150 2.2 10 100 –2.0 –0.5
–60 –60 –10 –1.0 150 4.7 10 100 –2.0 –0.5
–60 –60 –10 –1.0 2.0 150 10 10 100 –2.0 –0.5
–60 –60 –10 –1.0 150 0.47 4.7 100 –2.0 –0.5
–60 –60 –10 –1.0 150 0.22 2.2 100 –2.0 –0.5
–60 –60 –10 –1.0 150 – 10 100 –2.0 –0.5
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (A) (mW) (°C) R1R2hFE VCE IC
(kΩ)(kΩ) (V) (A) Remarks
Refer to
equivalent
circuit C
Switching
Transistor with Internal Resistor
■HQ1[ ] series (SOT-89)
Part number
Absolute maximum ratings
(TA = 25 °C)
VCBO VCEO VEBO ICPTTj
(V) (V) (V) (A) (mW) (°C)
Electrical characteristics
(TA = 25 °C)
R1R2hFE VCE IC
(kΩ)(kΩ) (V) (A) Remarks
Equivalent
circuit and
applications
HQ1A4A
HQ1F2Q
HQ1L2N
HQ1L2Q
HQ1A3M
HQ1F3M
HQ1F3P
–20 –20 –10 –2.0 150 – 10 150 –2.0 –1.0
–20 –20 –10 –2.0 150 0.22 2.2 150 –2.0 –1.0
–20 –20 –10 –2.0 150 0.47 1.0 150 –2.0 –1.0
–20 –20 –20 –10 2.0 150 0.47 4.7 150 –2.0 –1.0
–20 –20 –10 –2.0 150 1.0 1.0 150 –2.0 –1.0
–20 –20 –10 –2.0 150 2.2 2.2 150 –2.0 –1.0
–20 –20 –10 –2.0 150 4.7 10 150 –2.0 –1.0
Refer to
equivalent
circuit B
Switching
314 Selection Guide X10679EJHV0SG00
Transistor
Package
90 to 600
90 to 600
110 to 400
75 to 300
75 to 300
82 to 180
40 to 200
50 to 150
■Bipolar Transistor
µ
PA570T
µ
PA571T
µ
PA574T
µ
PA670T
µ
PA671T
µ
PA500T
µ
PA501T
µ
PA504T
µ
PA600T
µ
PA601T
µ
PA604T
µ
PA605T
µ
PA608T
µ
PA609T
µ
PA673T
µ
PA674T
1
2
3
11
12
1
2
3
4
5
11
12
15
16
17
18
Equivalent
circuit VCEO
(V) hFE
IC(DC)
(mA) PT∗
(mW) VCE (V)
100
–
100
100/–
100
100
–
100
100
–
100
100/–
100
100
–
100
100
–
100
100
–
500
500
–
500
200
200
–
50
50
–
50
50/–
50
50
–
50
50
–
50
50/–
50
50
–
50
50
–
50
50
–
16
40
–
40
15
15
–
15
200
200
300
200
200
300
300
300
300
300
300
300
300
300
200
200
Part
number IC (mA)
• 5-pin Super Mini-Mold
SC-88A
• 5-pin Mini-Mold
SC-74A
• 6-pin Super Mini-Mold
SC-88
6
–
6
6/–
6
6
–
6
6
–
6
6/–
6
6
–
6
6
–
6
6
–
1
1
–
1
6
1
–
1
1
–
1
1/–
1
1
–
1
1
–
1
1/–
1
1
–
1
1
–
1
1
1
10
–
10
–
100
150
–
150
• 6-pin Super Mini-Mold
SC-88
• 6-pin Mini-Mold
SC-74
∗: Total
µ
PA572T
µ
PA573T
µ
PA502T
µ
PA503T
µ
PA505T
µ
PA602T
µ
PA603T
µ
PA606T
µ
PA607T
µ
PA610TA
µ
PA611TA
µ
PA672T
6
7
6
7
8
9
10
13
14
10
9
13
Equivalent
circuit VDSS
(V) ID(DC)
(mA) PT∗
(mW) VGS (V)
RDS (on)
(Ω) MAX
100
–
100
100
–
100
100/–
100
100
–
100
100
–
100
–100
100
100
30
–
30
50
–
50
50/–
50
50
–
50
50
–
50
–30
30
50
200
200
300
300
300
300
300
300
300
300
300
200
13
60
30
100
30/100
30
100
30
100
60
15
40
Part
number
■MOS FET
ID (mA) Package
10
–
10
10
–
10
10/–
10
10
–
10
10
–
10
–
1
1
10
2.5
–
2.5
4
–
4
4/–
4
4
–
4
4
–
4
–
2.5
2.5
2.5
• 5-pin Mini-Mold
SC-74A
• 5-pin Super Mini-Mold
SC-88A
• 6-pin Super Mini-Mold
SC-88
• 6-pin Mini-Mold
SC-74
∗: Total
Equivalent Circuit
Transistor for Array
123456
1187 9 10 12
13 181514 16 17
Transistor
Selection Guide X10679EJHV0SG00 315
∗1: PW 30 ms, duty cycle 10% (7 circuits operation)
∗2: PW 10 ms, duty cycle 10% (7 circuits operation)
<
=
<
=
<
=
<
=
Number of
circuits
5678 60
45
60
60
60
60
50
50
50
50
400∗2
500
500
500
500
500
500
500
–
–
Output current
relationship
Source Sink
type type Darlington
FIP driver
Darlington
Darlington
Darlington
Darlington
Darlington output stage
Darlington output stage
Darlington output stage
16
18
16
16
16
16
18
18
16
µ
PA80C, GR
µ
PA81C
µ
PA2001C, GR
µ
PA2002C, GR
µ
PA2003C, GR
µ
PA2004C, GR
µ
PA2981C
µ
PA2982C
µ
PA2987C
Part number
Input/output
relationship
Inverter Non-iverter
type type
Output
voltage
VO
(V)
Output
current
IO
(mA/Unit)
Surge
absorb-
er diode
Input
imped-
ance “H” “L”
Ative level Number of pins
Remarks
20 kΩ
20 kΩ
–
7VZDi
+10.5 kΩ
2.7 kΩ
10.5 kΩ
3 kΩ
8.5 kΩ
3 kΩ
■Signal transistor array (Monolithic)
µ
PA2981
50
µ
PA2982
µ
PA2987
µ
PA2001
µ
PA2002
µ
PA2003
µ
PA2004
■Signal transistor array Product Map (Monolithic)
IO (mA)
VO (V) 500
60
–
–
–
–
–
–
■Power transistor array (Multi-chip, 4 circuits)
Surge absorber
diode Remarks
Input impedance
Part number Collector-
emitter voltage
VCE (V)
Number of
circuits Number of pins
Output current
relationship
Source Sink
type type
µ
PA1428AH
µ
PA1434H
µ
PA1436AH
µ
PA1437H
µ
PA1453H
µ
PA1454H
µ
PA1456H
µ
PA1458H
µ
PA1476H
µ
PA1478H
Collector current
IC (A)
–
–
–
–
–
–
–
–
–
–
10
10
10
10
10
10
10
10
10
10
60 ±10
60
100
–100
–60
100
100
60 ±10
100 ±15
31 ±4
Darlington
High beta
Darlington
Darlington
Low VCE(sat)
High beta
Darlington
Darlington
Darlington
Darlington
±2.0
3.0
±3.0
3.0
5.0
5.0
±5.0
±5.0
±2.0
±2.0
4
4
4
4
4
4
4
4
4
4
±
NPN
µ
PA1478H
PNP
NPN
µ
PA1428AH
µ
PA1434H
µ
PA1458H
PNP
µ
PA1453H
µ
PA1454H
µ
PA1456H
µ
PA1437H
: with Zenner Diode : Low VCE (sat) : Single High hFE
■Power transistor array Product Map (Multi-chip, 4 circuits)
2.0 5.0
IC (DC) (A)
Polarity
VCEO (V) 3.0
µ
PA1476H
30
●
●
●
60
100 PNP
NPN
µ
PA1436AH
Transistor Array
316 Selection Guide X10679EJHV0SG00
Transistor
µ
PA1500BH
µ
PA1501H
µ
PA1520BH
µ
PA1522H
µ
PA1523BH
µ
PA1524H
µ
PA1526H
µ
PA1527H
µ
PA1550H
µ
PA1552BH
µ
PA1556AH
µ
PA1572BH
µ
PA1576H
µ
PA1560H
■Power MOS FET array (Multi-chip, 4 circuits)
60
120
30
60
–
60
80
100
–100
30
60
100
60
100
120
12
12
10
10
10
10
10
10
10
10
10
10
10
10
±3
±3
±2
±2
2
±2
±2
2
±5
±5
±5
±2
±2
±3
–
–
–
–
–
–
–
–
–
–
–
Active level
Part number 478
Number of circuits VDSS
(V) ID
(A/Unit)
Surge
absorber
diode
4 V
driving “H” “L” Number of pins
Output current
relationship
Source Sink
type type
Input/output
relationship
Inverter Non-inverter
type type
±
±
•
µ
PA1520BH (0.25) •
µ
PA1550H (0.15)
•
µ
PA1522H (0.35)
•
µ
PA1572BH (0.8) •
µ
PA1500BH (0.24)
•
µ
PA1523BH (1.3) •
µ
PA1552BH (0.24)
•
µ
PA1524H (1.0)
•
µ
PA1526H (0.6) •
µ
PA1556AH (0.33)
•
µ
PA1576H (1.5)
•
µ
PA1527H (1.5) •
µ
PA1501H (0.53)
•
µ
PA1560H (0.165)
■Power MOS FET array Product Map (Multi-chip, 4 circuits)
2.0 5.03.0
VDSS (V) ID (DC) (A)
30
60
80
100
120
( ): RDS(on) (@VGS = 4 V) [Ω MAX.] Underlined: P-channel
•
µ
PA1601 (5.3 Ω, 7CH) (DIP, SOP) •
µ
PA1600 (4.0 Ω, 8CH) (DIP, SOP) •
µ
PA1603 (1.3 Ω, 4CH) (DIP, SOP)
•
µ
PA1602 (5.3 Ω, 7CH) (DIP, SOP)
■Power MOS FET array Product Map (Monolithic)
0.43 0.870.5
VDSS (V) ID (DC) (A)
30
■Power MOS FET array (Monolithic)
µ
PA1600CX/GS
µ
PA1601CX/GS
µ
PA1602CX/GS
µ
PA1603CX
µ
PA1604CX
20
16
16
16
16
0.5
0.43
0.43
0.87
0.87
–
–
–
Active level
Part number 478
Number of circuits VDSS
(V) ID
(A/Unit) 4 V
driving “H” “L” Number of pins
30
30
30
30
30
Surge
absorber
diode
Output current
relationship
Source Sink
type type
Input/output
relationship
Inverter Non-inverter
type type
Transistor Array
Diode
Selection Guide X10679EJHV0SG00 317
RD2.0P
RD2.2P
RD2.4P
RD2.7P
RD3.0P
RD3.3P
RD3.6P
RD3.9P
RD4.3P
RD4.7P
RD5.1P
RD5.6P
RD6.2P
RD6.8P
RD7.5P
RD8.2P
RD9.1P
RD10P
RD11P
RD12P
RD13P
RD15P
0.2 1.0
RD4.7UJ
RD5.1UJ
RD5.6UJ
RD6.2UJ
RD6.8UJ
RD7.5UJ
RD8.2UJ
RD9.1UJ
RD10UJ
RD11UJ
RD12UJ
RD13UJ
RD15UJ
Zener Diode
■Zener Diode Quick Reference (1/2) (Surface-Mount Type)
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
TYP. 0.15
2-pin ultra mini-mold
Vz (V) P (W)
RD2.0UM
RD2.2UM
RD2.4UM
RD2.7UM
RD3.0UM
RD3.3UM
RD3.6UM
RD3.9UM
RD4.3UM
RD4.7UM
RD5.1UM
RD5.6UM
RD6.2UM
RD6.8UM
RD7.5UM
RD8.2UM
RD9.1UM
RD10UM
RD11UM
RD12UM
RD13UM
RD15UM
RD2.0M
RD2.2M
RD2.4M
RD2.7M
RD3.0M
RD3.3M
RD3.6M
RD3.9M
RD4.3M
RD4.7M
RD5.1M
RD5.6M
RD6.2M
RD6.8M
RD7.5M
RD8.2M
RD9.1M
RD10M
RD11M
RD12M
RD13M
RD15M
RD2.0MW
RD2.2MW
RD2.4MW
RD2.7MW
RD3.0MW
RD3.3MW
RD3.6MW
RD3.9MW
RD4.3MW
RD4.7MW
RD5.1MW
RD5.6MW
RD6.2MW
RD6.8MW
RD7.5MW
RD8.2MW
RD9.1MW
RD10MW
RD11MW
RD12MW
RD13MW
RD15MW
RD2.0S
RD2.2S
RD2.4S
RD2.7S
RD3.0S
RD3.3S
RD3.6S
RD3.9S
RD4.3S
RD4.7S
RD5.1S
RD5.6S
RD6.2S
RD6.8S
RD7.5S
RD8.2S
RD9.1S
RD10S
RD11S
RD12S
RD13S
RD15S
RD4.7SL
RD5.1SL
RD5.6SL
RD6.2SL
RD6.8SL
RD7.5SL
RD8.2SL
RD9.1SL
RD10SL
RD11SL
RD12SL
RD13SL
RD15SL
RD2.0FM
RD2.2FM
RD2.4FM
RD2.7FM
RD3.0FM
RD3.3FM
RD3.9FM
RD4.3FM
RD4.7FM
RD4.7FM
RD5.1FM
RD5.6FM
RD6.2FM
RD6.8FM
RD7.5FM
RD8.2FM
RD9.1FM
RD10FM
RD11FM
RD12FM
RD13FM
RD15FM
Package General
Purpose Mini-mold (SC·59) 2-pin power
mini-mold
Power
mini-mold
(SC·62)
2-pin super mini-mold
Low noise General
Purpose Low noise
RD16P
RD18P
RD20P
RD22P
RD24P
RD27P
RD30P
RD33P
RD36P
RD39P
RD43P
RD47P
RD51P
RD56P
RD62P
RD68P
RD75P
RD82P
RD91P
RD100P
RD110P
RD120P
RD16UJ
RD18UJ
RD20UJ
RD22UJ
RD24UJ
RD27UJ
RD30UJ
RD33UJ
RD36UJ
RD39UJ
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
RD16UM
RD18UM
RD20UM
RD22UM
RD24UM
RD27UM
RD30UM
RD33UM
RD36UM
RD39UM
RD16M
RD18M
RD20M
RD22M
RD24M
RD27M
RD30M
RD33M
RD36M
RD39M
RD43M
RD47M
RD16MW
RD18MW
RD20MW
RD22MW
RD24MW
RD27MW
RD30MW
RD33MW
RD36MW
RD39MW
RD16S
RD18S
RD20S
RD22S
RD24S
RD27S
RD30S
RD33S
RD36S
RD39S
RD43S
RD47S
RD51S
RD56S
RD62S
RD68S
RD75S
RD82S
RD91S
RD100S
RD110S
RD120S
RD16SL
RD18SL
RD20SL
RD22SL
RD24SL
RD27SL
RD30SL
RD33SL
RD36SL
RD39SL
RD16FM
RD18FM
RD20FM
RD22FM
RD24FM
RD27FM
RD30FM
RD33FM
RD36FM
RD39FM
RD43FM
RD47FM
RD51FM
RD56FM
RD62FM
RD68FM
RD75FM
RD82FM
RD91FM
RD100FM
RD110FM
RD120FM
318 Selection Guide X10679EJHV0SG00
Diode
0.5
RD2.0E
RD2.2E
RD2.4E
RD2.7E
RD3.0E
RD3.3E
RD3.6E
RD3.9E
RD4.3E
RD4.7E
RD5.1E
RD5.6E
RD6.2E
RD6.8E
RD7.5E
RD8.2E
RD9.1E
RD10E
RD11E
RD12E
RD13E
RD15E
1.0
RD2.0F
RD2.2F
RD2.4F
RD2.7F
RD3.0F
RD3.3F
RD3.6F
RD3.9F
RD4.3F
RD4.7F
RD5.1F
RD5.6F
RD6.2F
RD6.8F
RD7.5F
RD8.2F
RD9.1F
RD10F
RD11F
RD12F
RD13F
RD15F
0.4
RD2.0ES
RD2.2ES
RD2.4ES
RD2.7ES
RD3.0ES
RD3.3ES
RD3.6ES
RD3.9ES
RD4.3ES
RD4.7ES
RD5.1ES
RD5.6ES
RD6.2ES
RD6.8ES
RD7.5ES
RD8.2ES
RD9.1ES
RD10ES
RD11ES
RD12ES
RD13ES
RD15ES
0.4
RD4.7JS
RD5.1JS
RD5.6JS
RD6.2JS
RD6.8JS
RD7.5JS
RD8.2JS
RD9.1JS
RD10JS
RD11JS
RD12JS
RD13JS
RD15JS
TYP.
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
Zener Diode
■Zener Diode Quick Reference (2/2) (Through-Hole Type)
VZ (V) P (W)
RD16E
RD18E
RD20E
RD22E
RD24E
RD27E
RD30E
RD33E
RD36E
RD39E
RD43E
RD47E
RD51E
RD56E
RD62E
RD68E
RD75E
RD82E
RD91E
RD100E
RD110E
RD120E
DO-35
RD16F
RD18F
RD20F
RD22F
RD24F
RD27F
RD30F
RD33F
RD36F
RD39F
RD43F
RD47F
RD51F
RD56F
RD62F
RD68F
RD75F
RD82F
DO-41
RD16ES
RD18ES
RD20ES
RD22ES
RD24ES
RD27ES
RD30ES
RD33ES
RD36ES
RD39ES
DO-34
RD16JS
RD18JS
RD20JS
RD22JS
RD24JS
RD27JS
RD30JS
RD33JS
RD36JS
RD39JS
DO-34
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
Package
Diode
Selection Guide X10679EJHV0SG00 319
VBR (V)
Noise Clipping Diode
■Surface-Mount Type Quick Reference
Application
0.15 0.2TYP.
P (W)
NNCD3.3D
NNCD3.6D
NNCD3.9D
NNCD4.3D
NNCD4.7D
NNCD5.1D
NNCD5.6D
NNCD6.2D
NNCD6.8D
NNCD7.5D
NNCD8.2D
NNCD9.1D
NNCD10D
NNCD11D
NNCD12D
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
27
• E.S.D.
absorber
• Surge absorber
NNCD3.3E
NNCD3.6E
NNCD3.9E
NNCD4.3E
NNCD4.7E
NNCD5.1E
NNCD5.6E
NNCD6.2E
NNCD6.8E
NNCD7.5E
NNCD8.2E
NNCD9.1E
NNCD10E
NNCD11E
NNCD12E
NNCD3.3F
NNCD3.6F
NNCD3.9F
NNCD4.3F
NNCD4.7F
NNCD5.1F
NNCD5.6F
NNCD6.2F
NNCD6.8F
NNCD7.5F
NNCD8.2F
NNCD9.1F
NNCD10F
NNCD11F
NNCD12F
NNCD3.3G
NNCD3.6G
NNCD3.9G
NNCD4.3G
NNCD4.7G
NNCD5.1G
NNCD5.6G
NNCD6.2G
NNCD6.8G
NNCD7.5G
NNCD27G
NNCD3.3C
NNCD3.6C
NNCD3.9C
NNCD4.3C
NNCD4.7C
NNCD5.1C
NNCD5.6C
NNCD6.2C
NNCD6.8C
NNCD7.5C
NNCD8.2C
NNCD9.1C
NNCD10C
NNCD11C
NNCD12C
2-pin ultra
mini-mold
Package 2-pin super
mini-mold 3-pin mini-mold (SC-59)
TwinSingle 5-pin mini-mold
(SC-74A quarto)
■Surface-Mount Type (Low Capacitance) Quick Reference
VBR (V) Application
0.2
TYP.
P (W)
5.6
6.2
6.8
Package
• E.S.D.
absorber
NNCD5.6LG
NNCD6.2LG
NNCD6.8LG
5-pin mini-mold (SC-74A quad)
NNCD5.6LH
NNCD6.2LH
NNCD6.8LH
5-pin super mini-mold (SC-88A quad)
■Surface-Mount Type (Low Capacitance and High ESD Endurance Type) Quick Reference
VBR (V) Application
0.2
TYP.
P (W)
5.6
6.2
6.8
Package
• E.S.D.
absorber
NNCD6.2MF
3-pin mini-mold (SC-59 twin)
NNCD5.6MG
NNCD6.2MG
NNCD6.8MG
5-pin mini-mold (SC-74A quad)
320 Selection Guide X10679EJHV0SG00
Diode
■Through Hole Type Quick Reference
VBR (V) Application
0.4 0.5TYP.
P (W)
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
Package
• E.S.D.
protection
• Surge absorber
NNCD3.3A
NNCD3.6A
NNCD3.9A
NNCD4.3A
NNCD4.7A
NNCD5.1A
NNCD5.6A
NNCD6.2A
NNCD6.8A
NNCD7.5A
NNCD8.2A
NNCD9.1A
NNCD10A
NNCD11A
NNCD12A
DO-34
NNCD3.3B
NNCD3.6B
NNCD3.9B
NNCD4.3B
NNCD4.7B
NNCD5.1B
NNCD5.6B
NNCD6.2B
NNCD6.8B
NNCD7.5B
NNCD8.2B
NNCD9.1B
NNCD10B
NNCD11B
NNCD12B
DO-35
Noise Clipping Diode
Thyristor
Selection Guide X10679EJHV0SG00 321
Package
IT(RMS) (A)
IT(AV) (A)
ITSM (A)
Tj (°C)200
400
500
600
IGT (mA)
tq (TYP.) (
µ
s)
8 12.6
58
80 100
125
– 8P2M
5P4M 8P4M
5P5M –
5P6M –
10 10
50 100
4 4 4 4.7 4.7
2 2 2.5 3 3
20 20 45 65 65
– 2S2M – – –
2P4M 2S4M 2V5P4M 3P4MH 3S4M
2P5M – – 3P5MH –
2P6M – – 3P6MH –
0.2 0.3 0.1 0.2 30
30 15*280 80 5*2
8 12.6
58
80 100
125
– 8P2SM
5P4SM 8P4SM
––
5P6SM –
10 10
50 100
125
4.7 8 12.6
358
40 65 80
125
–––
3P4J 5P4J 8P4J
3P4J-Z 5P4J-Z 8P4J-Z
–––
5P6J
5P6J-Z
0.1 0.2 10
30 80 50
0.47
0.3
6
125
03P2J
03P4J
03P5J
–
0.2
25
TO-220AB
Thyristor
■SCR
0.47
0.3
8
125
03P2M – –
03P4M
03P4MF
*103P4MG
– – 03P5MG
– – 03P6MG
0.2 100
µ
A 3-50
µ
A
25 40 60
TO-202AA
––
Electrical
charac-
teristics SOT-89 TO-92 MP-3
VDRM
VRRM
(V)
TO-220-like
insulated type
MP–45CMP–25
*1: VRRM = 5 V
*2: indicates MAX.
■TRIAC
–
0.8 1.0
79
125
AC0V AC01
8DGM DGM
––
––
53
10 5
53
10 3
1 0.5
35
30 50
125
AC03 AC05
DJM DJM
AC03 AC05
DJM-Z DJM-Z
––
AC03 AC05
FJM FJM
AC03 AC05
FJM-Z FJM-Z
12 10
––
12 10
12 10
55
3
30
125
AC03
DGM
AC03
EGM
AC03
FGM
12
–
12
12
5
3 5 8 10 12 16
30 50 80 80 100 150
125
AC03 AC05 AC08 AC10 AC12 AC16
DSM DSM DSM DSM DSM DSM
AC05 AC08 AC10 AC12
ESM ESM ESM ESM
AC03 AC05 AC08 AC10 AC12 AC16
FSM FSM FSM FSM FSM FSM
12 10 20 20 20 30
––––––
12 10 20 20 20 30
12 10 20 20 20 30
5 5 10 10 10 10
TO-
202AA
–
400
500
600
1.0
7.0
125
AC01DJM
–
–
5
10
5
10
0.5
MIN.
IGT
(mA)
TO-220AB-like insulated typeTO-220ABMP-3TO-92SOT-89
Electrical
charac-
teristics 5 8 10 12 16
50 80 80 100 150
125
AC05 AC08 AC10 AC12 AC16
DGM DGM DGM DGM DGM
AC05 AC08 AC10 AC12 AC16
EGM EGM EGM EGM EGM
AC05 AC08 AC10 AC12 AC16
FGM FGM FGM FGM FGM
10 20 20 20 30
– ––––
10 20 20 20 30
10 20 20 20 30
5 10101010
VDRM
VRRM
(V)
Package
IT(RMS) (A)
ITSM(50 Hz) (A)
Tj (°C)
I
II
III
IV
(dv/dt)C
(V/
µ
s)
MP–45CMP–25
322 Selection Guide X10679EJHV0SG00
[MEMO]
Selection Guide X10679EJHV0SG00 323
RF and Microwave Devices
7
IC....................................................................................... 324
• AGC AMP. (
µ
PC××××,
µ
PG××××)............................... 324
• IQ Modulator/Demodulator (
µ
PC××××).................... 324
• Up Converter (
µ
PC××××)........................................... 324
• Prescaler (
µ
PB××××,
µ
PG××××)................................ 325
• Down Converter (
µ
PC××××)...................................... 326
• PLL Synthesizer (
µ
PB××××) ..................................... 327
• Switch (
µ
PG××××) ...................................................... 327
• Wide Band AMP. (
µ
PC××××,
µ
PG××××).................... 328
• Driver AMP. (
µ
PG××××).............................................. 330
• Power AMP. (
µ
PG××××, MC-××××)............................ 330
• Transistor Array (
µ
PA×××)........................................ 330
• Typical Characteristics............................................. 331
Discrete............................................................................ 335
• Dual Gate MES/MOS FET ......................................... 335
• Low Noise BIP. TR. (2SC, NE) ................................. 336
• Twin TR. (
µ
PA×××) ..................................................... 338
• Low Noise GaAs/HJ FET (NE) ................................. 339
• Power TR./FET (
2SC, NE, NEL, NEM, NES, NEZ
) .... 341
• Cross-reference Table .............................................. 344
Application ...................................................................... 351
324 Selection Guide X10679EJHV0SG00
RF and Microwave Devices
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC8101GR Mobile Comm. 3 15 150 LOL=–49dBc, ImR=37.5dBc, 20-pin SSOP
IQ Modulator Po=–11dBm
µ
PC8104GR Mobile Comm. 3 28 900–2000 LOL=–40dBc, ImR=–40dBc,
IQ Modulator Po=–13.5dBm
µ
PC8105GR Mobile Comm. 3 16 400 LOL=–40dBc, ImR=–40dBc, 16-pin SSOP
IQ Modulator Po=–18.5dBm
µ
PC8110GR Mobile Comm. 3 24 900 LOL=–35dBc, ImR=–40dBc, 20-pin SSOP
IQ Modulator Po=–10dBm
µ
PC8125GR Mobile Comm. 3 36 1800–2000 LOL=–37dBc, ImR=–35dBc,
IQ Modulator PRFout=–9dBm
µ
PC8126GR Mobile Comm. 3 35 915-960 LOL=–35dBc, ImR=–40dBc,
IQ Modulator PRFout=–9dBm
µ
PC8126K Mobile Comm. 3 35 889-960 LOL=–35dBc, ImR=–40dBc, 28-pin QFN
IQ Modulator PRFout=–9dBm
µ
PC8129GR Mobile Comm. 3 28 800–1900 LOL=–40dBc, ImR=–30dBc, 20–pin SSOP
IQ Modulator PRFout=–5dBm
µ
PC8139GR-7JH PHS 3 32.5 1800-2000 LOL=–40dBc, ImR=–40dBc, 30-pin TSSOP
Transceiver PTX•MIXout=–13dBm
µ
PC8158K Mobile Comm. 3 28 800-1500 LOL=–40dBc, ImR=–40dBc, 28-pin QFN
IQ Modulator PRFout=–11.5dBm
µ
PC2766GR/GS BS Tuner 5 60 DC–1000 ∆φ ±1.5°, ∆V ±0.5dB 20-pin SSOP/SOP
IQ Demodulator
µ
PC2781GR BS Tuner 5 70 440–520 ∆φ ±2°, ∆V ±0.5dB 20-pin SSOP
IQ Demodulator
µ
PC3205GR BS Tuner 5 65 440–520 ∆φ ±2°, ∆V ±0.5dB
IQ Demodulator
■IQ Modulator/Demodulator (
µ
PC××××)
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC8100GR Mobile Comm. 3 15 800–900 CG(UP)=20.5dB, 20-pin SSOP
Up/Down CG(DOWN)=18dB
µ
PC8106T Mobile Comm. 3 9 400–2000 CG=7dB, 6-pin minimold
Po(sat)=–4dBm@fRFOUT=1900MHz
µ
PC8106TB Mobile Comm. 3 9 400–2000 CG=7dB, 6-pin super
Po(sat)=–4dBm@fRFOUT=1900MHz minimold
µ
PC8109T Mobile Comm. 3 5 400–2000 CG=5dB, 6-pin minimold
Po(sat)=–7.5dBm@fRFOUT=1900MHz
µ
PC8109TB Mobile Comm. 3 5 400–2000 CG=4dB, 6-pin super
Po(sat)=–7.5dBm@fRFOUT=1900MHz minimold
µ
PC8163TB Mobile Comm. 3 16.5 800–2000 CG=9dB, Po(sat)=0.5dBm
OIP3 =9.5dBm@f=830MHz
µ
PC2799GR CATV Tuner 5 60 250–850 GCR=14.5dB, Po(sat)=6dBm 20-pin SSOP
(@VAGC=5V)
■Up Converter (
µ
PC××××)
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC8119T Mobile Comm. 3 11 100–1920 GP (MAX.)=12.5dB, GCR=50dB, 6-pin minimold
Po(1dB)=3dBm@f=950MHz
µ
PC8120T Mobile Comm. 3 11 100-1920 GP(MAX.)=13dB, GCR=50dB,
Po(1dB)=3.5dBm@f=950MHz
µ
PC8130TA Mobile Comm. 3 11 800–1500 GP(MAX.)=12.5dB, GCR=50dB,
Po(1dB)=5dBm@f=950MHz
µ
PC8131TA Mobile Comm. 3 11 800–1500 GP(MAX.)=12dB, GCR=45dB,
Po(1dB)=5dBm@f=950MHz
µ
PG175TA Mobile Comm. 3 20 925–960 G P=30dB, GCR=35dB, Po=8dBm 6-pin minimold
µ
PC2723T BS Tuner, 5 15 1100 GP=13dB, NF=11dB,
Mobile Comm. Po=–2dBm@f=500MHz
µ
PC3206GR CATV Tuner, 5 34.5 100 or less GCR=50dB(MIN.), 20-pin SSOP
Video Amp. GP(MAX.)=38.5dB(@AGC block)
µ
PC3211GR CATV Tuner 9 38 5–100 GCR=55dB, IM2=44dBc,
IM3=57dBc
<
=<
=
<
=<
=
<
=<
=
IC
■AGC AMP. (
µ
PC××××,
µ
PG××××)
RF and Microwave Devices
Selection Guide X10679EJHV0SG00 325
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PB1502GR Mobile Comm. 3 6.7 500–1700 64/65, 128/129, V o=0.8Vp–p 8-pin SOP
1.7GHz 64/65, 128/129
µ
PB1502GR(1) Mobile Comm. 3 6.7 500–2000 64/65, 128/129, V o=0.8Vp–p
2.0GHz 64/65, 128/129
µ
PB1504GR Mobile Comm. 3 2.47@64/65 500–1100 64/65, 128/129, Vo=0.9Vp–p
1.1GHz 64/65, 128/129 2.24@128/129
µ
PB1509GV Mobile Comm. 3 5 500–1000@1/8 1/2, 1/4, 1/8 Vo=0.3Vp–p 8-pin SSOP
1GHz, ÷2, ÷4, ÷8
µ
PB1505GR BS Tuner 5 14 500–3000 1/256, 1/128, 1/64, Vo=1.6Vp–p 8-pin SOP
3GHz, ÷64, ÷128, ÷256
µ
PB1506GV BS Tuner 5 19 500–3000 1/256, 1/128, 1/64, Vo=1.6Vp–p 8–pin SSOP
3GHz, ÷64, ÷128, ÷256
µ
PB1507GV BS Tuner 5 19 500–3000 1/256, 1/128, 1/64, Vo=1.6Vp–p
3GHz, ÷64, ÷128, ÷256
µ
PB1508GV BS Tuner 5 12 500–3000 1/2, Po=–7dBm
3GHz, ÷2
µ
PB1510GV BS Tuner 5 14 500–3000 1/4, Po=–7dBm
3GHz, ÷4
µ
PG501B Microwave Comm. 10 70 1300–5000 1/4 Static, Pin=10dBm, Po=2dBm K-12,
5GHz, ÷48-pin ceramic
µ
PG502B Microwave Comm. 10 100 1000–5000 1/2 Static, Pin=10dBm, Po=2dBm
5GHz, ÷2
µ
PG503B Microwave Comm. 3.8, –2.2 80 4000–8000 1/2 Dynamic, Pin=10dBm,
9GHz, ÷4Po=2dBm
µ
PG504B Microwave Comm. 3.8, –2.2 55 2500–8000 1/2 Dynamic, Pin=10dBm,
9GHz, ÷2Po=–1dBm
µ
PG506B Microwave Comm. 3.8, –2.2 105 8200–13200 1/8 Dynamic, Pin=6dBm,
14GHz, ÷8Po=1dBm
µ
PG508B Microwave Comm. 3.8, –2.2 100 8500–12200 1/4 Dynamic, Pin=6dBm,
13GHz, ÷4P
o=1dBm
IC
■Prescaler (
µ
PB××××,
µ
PG××××)
326 Selection Guide X10679EJHV0SG00
RF and Microwave Devices
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC2721GR/GV General Purpose 5 3 8 900–2000 GP=21dB, NF=9–11dB, 8-pin SOP/SSOP
L–Band Emitter follower Output
µ
PC2722GR/GV General Purpose 5 2 8 900–2000 GP=18dB, NF=9–11dB,
L–Band Open Collector Output
µ
PC2795GV General Purpose 5 3 5 950–2150 CG=11dB, NF=13.5dB@f=950MHz 8-pin SSOP
L–Band
µ
PC1694GR General Purpose 5 4 0 55–1000 CG=18dB, NF=12.5–13.5dB, 14-pin SOP
1GHz Po(sat)=10dBm
µ
PC2757T Mobile Comm. 3 5.6 100–2000 CG=15dB, NF=10dB@f=800MHz 6-pin minimold
µ
PC2757TB Mobile Comm. 3 5.6 100–2000 CG=15dB, NF=10dB@f=800MHz 6-pin super
minimold
µ
PC2758T Mobile Comm. 3 11 100–2000 CG=19dB, NF=9dB@f=800MHz 6-pin minimold
µ
PC2758TB Mobile Comm. 3 11 100–2000 CG=19dB, NF=9dB@f=800MHz 6-pin super
minimold
µ
PC8001 Mobile Comm. 3 2.1 470 fout=455kHz, RSSIout=0.79–2.75V 14-pin SSOP
µ
PC8002 Mobile Comm. 3 1.7 250 fout=10.7MHz, RSSIout=1.08–2.68V 20-pin SSOP
µ
PC8112T Mobile Comm. 3 8.5 800–2000 CG=13dB, 6-pin minimold
NF=11.2dB@fRFin=1900MHz
µ
PC8112TB Mobile Comm. 3 8.5 800–2000 CG=13dB, 6-pin super
Po(sat)=–3dBm@fRFin=1900MHz minimold
µ
PC8100GR Mobile Comm. 3 15 800–900 CG(UP)=20.5dB, 20-pin SSOP
Up/Down CG(DOWN)=18dB
µ
PC2743GS TV/VCR Tuner 9 47@VHF 55–890 CG=20/23dB, 20-pin SOP
UHF/VHF 49@UHF NF=13/12dB, (VHF/UHF)
µ
PC2744GS TV/VCR Tuner 9 47@VHF 55–890 CG=25/31dB,
UHF/VHF 49@UHF NF=11/10dB, (VHF/UHF)
µ
PC2775GR/GS TV/VCR Tuner 9 35@VHF 55–890 CG=22/28dB, 20-pin SSOP/SOP
UHF/VHF 36@UHF NF=10/10dB, (VHF/UHF)
µ
PC2794GS TV/VCR Tuner 9 48@VHF 55–890 CG=23/32dB, 20-pin SOP
UHF/VHF 50@UHF NF=11/10dB, (VHF/UHF)
µ
PC2797GR TV/VCR Tuner 9 38 55–890 CG=22/28dB, 20-pin SSOP
UHF/VHF NF=11/10dB, (VHF/UHF)
µ
PC3200GS TV/VCR Tuner 9 38 55–890 CG=22/28dB, 20-pin SOP
UHF/VHF NF=11/10dB, (VHF/UHF)
µ
PC3202GR TV/VCR Tuner 5 41 55–800 CG=25/29dB, 20-pin SSOP
UHF/VHF NF=10.5/10dB, (VHF/UHF)
µ
PC3207GR TV/VCR Tuner 9 38 55–890 CG=22/28dB,
UHF/VHF NF=11/10dB, (VHF/UHF)
µ
PC1686G TV/VCR Tuner 5 38 55–500 CG=19.5dB, NF=11dB, 8-pin SOP
VHF Po(sat)=10dBm@f=200MHz
µ
PC1686GV TV/VCR Tuner 5 38 55–500 CG=19.5dB, NF=11dB, 8-pin SSOP
VHF Po(sat)=10dBm@f=200MHz
µ
PC1687G TV/VCR Tuner 5 38 500–900 CG=26dB, NF=9dB, 8-pin SOP
UHF Po(sat)=10dBm@f=500MHz
µ
PC1687GV TV/VCR Tuner 5 38 500–900 CG=26dB, NF=9dB, 8-pin SSOP
UHF Po(sat)=10dBm@f=500MHz
µ
PC2731GS BS Tuner 5 69 900–2000 CG=14.5dB, 20-pin SOP
AGC NF=12dB@f=900MHz
µ
PC2734GR BS Tuner 5 40 900–2100 CG=12dB, NF=10dB, 20-pin SSOP
fin=480MHz@f=900MHz
µ
PC2782GR BS Tuner 5 66 900–2100 CG=10dB,
AGC NF=11dB@f=900MHz
µ
PC2798GR CATV Tuner 5 35.5 30–250 GCR=32dB,
Video Amp. Vo=3Vp–p(@RL=1kΩ)
µ
PC2753GR GPS 3 6.9 DC–400 CG=38dB, NF=12dB
µ
PC2756T GPS 3 6 100–2000 CG=14dB, NF=10dB, 6-pin minimold
Po=–8dBm@f=900MHz
µ
PC2756TB GPS 3 6 100–2000 CG=14dB, NF=10dB, 6-pin super
Po=–8dBm@f=900MHz minimold
IC
■Down Converter (
µ
PC××××) (1/2)
RF and Microwave Devices
Selection Guide X10679EJHV0SG00 327
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC2768GR Keyless Entry 3 6.8 DC-450 CG=36dB, 20-pin SSOP
NF=12dB@f=450MHz
µ
PC8116GR Keyless Entry 3 4.1 100–500 GMIX=11dB, RSSIsen=–95dBm
µ
PC8103T Pager 1.05 1 150–330 CG=15.5dB@fRFin=280MHz 6-pin minimold
µ
PC8108T Pager 1.05 1.5 150–930 CG=15dB@fRFin=930MHz
IC
■Down Converter (
µ
PC××××) (2/2)
■PLL Synthesizer (
µ
PB××××)
Supply Supply Operating
Part Number Functions Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PB1005K PLL Synthesizer GPS 3 45 1575.42 f 2ndIF=4.092MHz, 36-pin QFN
+Down Converters f TCXOin=16.368MHz
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PG132G Mobile Comm. 0, +3 0.05 100–2500 LINS=0.6dB, ISL=22dB, 8-pin SSOP
SPDT Pin(1dB)=30dBm
µ
PG133G Mobile Comm. 0, –3 0.05 100–2500 LINS=0.6dB, ISL=25dB,
SPDT Pin(1dB)=25dBm
µ
PG137GV Mobile Comm. 0, +3 0.005 100–2500 LINS=0.55dB, ISL=25dB,
SPDT Pin(1dB)=32dBm
MIN.@f=1GHz
µ
PG138GV Mobile Comm. 0, –3 0.005 100–2500 LINS=0.55dB, ISL=30dB,
SPDT Pin(1dB)=32dBm
MIN.@f=1GHz
µ
PG139GV Mobile Comm. VCONT= 0.015 100–2500 TXLINS=0.7dB, 8-pin SOP
DPDT 3.6V/0V, TXISL=15.5dB,
VDD=3V TXPin(1dB)=34dBm@f=1GHz
µ
PG152TA Mobile Comm. 0, +3 0.005 100–2500 LINS=0.6dB, ISL=22dB, 6-pin minimold
SPDT Pin(1dB)=30dBm@f=2GHz
µ
PG153TB Mobile Comm. VCONT= 0.02 100–2500 LINS=0.7dB, ISL=13dB, 6-pin super
SPDT 3.0V/0V Pin(1dB)=33dBm@f=2GHz minimold
µ
PG154TB Mobile Comm. VCONT= 0.002 100–2500 LINS=0.65dB, ISL=21dB,
SPDT 3.0V/0V, Pin(1dB)=30dBm@f=2GHz
VDD=3V
µ
PG155TB Mobile Comm. VCONT= 0.02 100–2500 LINS=0.75dB, ISL=16dB,
SPDT 3.0V/0V Pin(1dB)=34dBm@f=2GHz
■Switch (
µ
PG××××)
328 Selection Guide X10679EJHV0SG00
RF and Microwave Devices
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC1652G General Purpose 5 2 0 1200 GP=18dB, NF=5.5dB, 8-pin SOP
Po=+5dBm@f=500MHz
µ
PC1658G General Purpose 10 9–18 1000 GP=31dB, NF=1.5dB
µ
PC1663 General Purpose 6 1 3 200 BW=700MHz, Avd=320 8-pin SOP/SSOP
Video Amp. Gain determined by external
resister.
Input noise 3
µ
Vr.m.s.
µ
PC1675G General Purpose 5 1 7 1900 GP=12dB, NF=5.5dB, 4-pin super small
Po=+4dBm@f=500MHz package
µ
PC1676G General Purpose 5 1 9 1200 GP=22dB, NF=4.5dB, Po=+5dBm
@f=500MHz
µ
PC1678G General Purpose 5 4 9 2000 GP=23dB, NF=6dB, Po=+17.5dBm 8-pin SOP
Medium Output @f=500MHz
µ
PC1678GV General Purpose 5 4 9 2000 GP=23dB, NF=6dB, Po=+17.5dBm 8-pin SSOP
Medium Output @f=500MHz
µ
PC1679G General Purpose 5 4 0 1800 GP=21.5dB, NF=6dB, 8-pin SOP
Medium Output Po=+15.5dBm@f=500MHz
µ
PC1688G General Purpose 5 1 9 1100 GP=21dB, NF=4dB, Po=+4dBm 4-pin super small
@f=500MHz package
µ
PC2708T General Purpose 5 2 6 2900 GP=15dB, NF=6.5dB, Po=+10dBm 6-pin minimold
Medium Output @f=1GHz
µ
PC2708TB General Purpose 5 2 6 2900 GP=15dB, NF=6.5dB, Po=+10dBm 6-pin super
Medium Output @f=1GHz minimold
µ
PC2709T General Purpose 5 2 5 2300 GP=23dB, NF=5dB, 6-pin minimold
Medium Output Po=+11.5dBm@f=1GHz
µ
PC2709TB General Purpose 5 2 5 2300 GP=23dB, NF=5dB, 6-pin super
Medium Output Po=+11.5dBm@f=1GHz minimold
µ
PC2710T General Purpose 5 2 2 1000 GP=33dB, NF=3.5dB, 6-pin minimold
Medium Output Po=+13.5dBm@f=500MHz
µ
PC2710TB General Purpose 5 2 2 1000 GP=33dB, NF=3.5dB, 6-pin super
Po=+13.5dBm@f=500MHz minimold
µ
PC2711T General Purpose 5 1 2 2900 GP=13dB, NF=5dB, 6-pin minimold
Po=+1dBm@f=1GHz
µ
PC2711TB General Purpose 5 1 2 2900 GP=13dB, NF=5dB, 6-pin super
Po=+1dBm@f=1GHz minimold
µ
PC2712T General Purpose 5 1 2 2600 GP=20dB, NF=4.5dB, 6-pin minimold
Po=+3dBm@f=1GHz
µ
PC2712TB General Purpose 5 1 2 2600 GP=20dB, NF=4.5dB, 6-pin super
Po=+3dBm@f=1GHz minimold
µ
PC2713T General Purpose 5 1 2 1200 GP=29dB, NF=3.2dB, 6-pin minimold
Po=+7dBm@f=500MHz
µ
PC2714T General Purpose 3.4 4.5 1800 GP=11.5dB, NF=5dB,
Po=–7dBm@f=500MHz
µ
PC2715T General Purpose 3.4 4.5 1200 GP=19dB, NF=4.5dB,
Po=–6dBm@f=500MHz
µ
PC2726T General Purpose 5 11.5 1600 GP=15dB, NF=4.5dB,
Differential Amp. Po=–2dBm@f=400MHz
µ
PC3210TB General Purpose 5 1 5 2300 GP=20dB, NF=3.4dB, 6-pin super
Po=+3.5dBm@f=1.5GHz minimold
µ
PG100B General Purpose ±5 45 50–3000 NF=2.7dB, GP=16dB, T-31,
Po(1dB)=6dBm 8-pin ceramic
µ
PG101B General Purpose 8, –5 100 50–3000 NF=5dB, GP=14dB,
Po(1dB)=18dBm
µ
PG103B General Purpose ±5 55 50–3000 NF=4.5dB, GP=10dB,
Po(1dB)=9dBm
µ
PG110B General Purpose 8 135 2000–8000 GP=15dB, Po(1dB)=14dBm 4-pin ceramic
IC
■Wide Band AMP. (
µ
PC××××,
µ
PG××××) (1/2)
RF and Microwave Devices
Selection Guide X10679EJHV0SG00 329
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PC2745T Mobile Comm. 3 7.5 2700 GP=12dB, NF=6dB, 6-pin minimold
Po=–1dBm@f=500MHz
µ
PC2745TB Mobile Comm. 3 7.5 2700 GP=12dB, NF=6dB, 6-pin super
Po=–1dBm@f=500MHz minimold
µ
PC2746T Mobile Comm. 3 7.5 1500 GP=19dB, NF=4dB, 6-pin minimold
Po=0dBm@f=500MHz
µ
PC2746TB Mobile Comm. 3 7.5 1500 GP=19dB, NF=4dB, 6-pin super
Po=0dBm@f=500MHz minimold
µ
PC2747T Mobile Comm. 3 5 1800 GP=12dB, NF=3.3dB, 6-pin minimold
Po=–7dBm@f=900MHz
µ
PC2747TB Mobile Comm. 3 5 1800 GP=12dB, NF=3.3dB, 6-pin super
Po=–7dBm@f=900MHz minimold
µ
PC2748T Mobile Comm. 3 6 200–1500 GP=19dB, NF=2.8dB, 6-pin minimold
Po=–3.5dBm@f=900MHz
µ
PC2748TB Mobile Comm. 3 6 200–1500 GP=19dB, NF=2.8dB, 6-pin super
Po=–3.5dBm@f=900MHz minimold
µ
PC2749T Mobile Comm. 3 6 2900 GP=16dB, NF=4dB, 6-pin minimold
Po=–6dBm@f=1900MHz
µ
PC2749TB Mobile Comm. 3 6 2900 GP=16dB, NF=4dB, 6-pin super
Po=–6dBm@f=1900MHz minimold
µ
PC2762T Mobile Comm. 3 26.5 2900 GP=13dB, NF=6.5dB, 6-pin minimold
Medium Output Po=+8dBm@f=900MHz
µ
PC2762TB Mobile Comm. 3 26.5 2900 GP=13dB, NF=6.5dB, 6-pin super
Medium Output Po=+8dBm@f=900MHz minimold
µ
PC2763T Mobile Comm. 3 27 2700 GP=20dB, NF=5.5dB, 6-pin minimold
Medium Output Po=+9.5dBm@f=900MHz
µ
PC2763TB Mobile Comm. 3 27 2700 GP=20dB, NF=5.5dB, 6-pin super
Medium Output Po=+9.5dBm@f=900MHz minimold
µ
PC2771T Mobile Comm. 3 36 2200 GP=21dB, NF=6dB, 6-pin minimold
Medium Output Po=+12.5dBm@f=900MHz
µ
PC2771TB Mobile Comm. 3 36 2200 GP=21dB, NF=6dB, 6-pin super
Medium Output Po=+12.5dBm@f=900MHz minimold
µ
PC8128TB Mobile Comm. 2.4–3.3 2.8 100–1900 GP=12.5dB, ISL=39dB,
Buff Amp. Po(1dB)=–4dBm, NF=6.0dB,
ICC=2.8mA@f=1000MHz
µ
PC8151TB Mobile Comm. 2.4–3.3 4.2 100–1900 GP=12.5dB, ISL=38dB,
Buff Amp. Po(1dB)=+2.5dBm, NF=6.0dB,
ICC=4.2mA@f=1000MHz
µ
PC8152TB Mobile Comm. 2.4–3.3 5.6 100–1900 GP=23dB, ISL=40dB,
Buff Amp. Po(1dB)=–4.5dBm, NF=3.5dB,
ICC=5.6mA@f=1000MHz
µ
PG170TB Mobile Comm. 3.6 30 800–1500 GL=11dB,
Po(1dB)=14.5dBm
µ
PC2776T BS Converter 5 25 2700 GP=23dB, NF=6dB, 6-pin minimold
Medium Output Po=+6.5dBm@f=1GHz
µ
PC2776TB BS Converter 5 25 2700 GP=23dB, NF=6dB, 6-pin super
Medium Output Po=+6.5dBm@f=1GHz minimold
µ
PC2791TB BS Converter 5 17 1900 GP=12dB, NF=5.5dB,
Po=+4dBm@f=500MHz
µ
PC2792TB BS Converter 5 19 1200 GP=20dB, NF=3.5dB,
Po=+5dBm@f=500MHz
µ
PC8102T Pager 1 0.5 150–330 GP=14.7dB, 6-pin minimold
NF=4.0dB@f=280MHz
IC
■Wide Band AMP. (
µ
PC××××,
µ
PG××××) (2/2)
330 Selection Guide X10679EJHV0SG00
RF and Microwave Devices
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PG173TA Mobile Comm. 2.8 25 800–1000 Po =9dBm, GP=27dB MIN. 6-pin minimold
f=889–960MHz
µ
PG174TA Mobile Comm. 3 30 1400–2000 Po =10dBm, GP=32dB MIN.
f=1429–1453MHz
µ
PG175TA Mobile Comm. 3 20 925–960 G P=30dB, GCR=35dB, Po =8dBm
IC
■Driver AMP. (
µ
PG××××)
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PG171GV Mobile Comm. 3, –2 160 1895–1918 GP=20dB, Po=21dBm, 8-pin SSOP
Padj=–60dBc
MC-7712 CATV 24 240 50–750 NF=7.0dB, GL=18.5dB 7-pin special
MC-7716 CATV 24 240 50–750 NF=6.5dB, GL=22.0dB package
MC-7722 CATV 24 395 50–750 NF=7.0dB, GL=18.5dB
MC-7726 CATV 24 395 50–750 NF=6.5dB, GL=22.0dB
MC-7852 CATV 24 240 50–860 NF=7.0dB, GL=18.0dB
MC-7856 CATV 24 240 50–860 NF=7.0dB, GL=21.5dB
MC-7862 CATV 24 395 50–860 NF=7.0dB, GL=18.5dB
MC-7866 CATV 24 395 50–860 NF=6.5dB, GL=21.5dB
■Power AMP. (
µ
PG××××, MC-××××)
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PA101 General Pupose 3 0.001 9000 fT=9GHz 14-pin ceramic,
µ
PA102 General Pupose 3 0.001 9000 fT=9GHz 8-pin miniflat
µ
PA103 General Pupose 3 0.001 9000 fT=9GHz
µ
PA104 General Pupose 3 0.001 9000 fT=9GHz
■Transistor Array (
µ
PA×××)
RF and Microwave Devices
Selection Guide X10679EJHV0SG00 331
IC
■Typical Characteristics
• POWER GAIN, NOISE FIGURE vs. FREQUENCY (1/4)
0
10
20
30
40
50
7 10 30 50 70 100 300 500 700 1G 3G 5G
G
P
PC1658
µ
PC1678
µ
PC1679
µ
PC1678
µ
PC1658
µ
NF
Power gain G
P
Noise figure NF(dB)
(dB)
Frequency f (MHz)
• POWER GAIN, NOISE FIGURE vs. FREQUENCY (2/4)
0
5
10
15
20
25
7 10 30 50 70 100 300 500 700 1G 3G 5G
G
P
NF
PC1676
µ
PC1676
µ
PC1675
µ
PC1675
µ
PC1688
µ
PC1688
µ
Power gain G
P
Noise figure NF(dB)
(dB)
Frequency f (MHz)
332 Selection Guide X10679EJHV0SG00
RF and Microwave Devices
IC
■Typical Characteristics
• POWER GAIN, NOISE FIGURE vs. FREQUENCY (3/4)
25
20
15
10
5
07
Power gain G
P
(dB)
Noise figure NF (dB)
Frequency f (MHz)
10 30 50 70 100 300 500 700 1G 3G 5G
G
P
NF
PC2771
µ
PC2763
µ
PC2746
µ
PC2748
µ
PC2749
µ
PC2745
µ
PC2745
µ
PC2746
µ
PC2747, 2749
µ
PC2748
µ
PC2762
µ
PC2747
µ
• POWER GAIN, NOISE FIGURE vs. FREQUENCY (4/4)
10
07
Power gain G
P
(dB)
Noise figure NF (dB)
Frequency f (MHz)
µ
PC2710
PC2713
PC2709
PC2712
PC2715
PC2711
PC2714
PC2708/11 PC2709/12/14/15
PC2710/13
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
NF
PC2708
G
P
10 30 50 70 100 300 500 700 1G 3G 5G
20
30
40
50
PC2749
µ
PC2749
µ
PC3210
µ
PC3210
µ
RF and Microwave Devices
Selection Guide X10679EJHV0SG00 333
IC
■Typical Characteristics
• MAXIMUM OUTPUT POWER vs. FREQUENCY (1/2)
• MAXIMUM OUTPUT POWER vs. FREQUENCY (2/2)
–10
–207
Maximum output power P
o(sat)
(dBm)
Frequency f (MHz)
PC2713
µ
10 30 50 70 100 300 500 700 1G 3G 5G
0
10
20
30
PC2749
PC2708
PC2712
PC2711
PC2762
PC2714
PC2715
µ
PC2763
µ
µ
µ
µ
µ
µ
µ
µ
PC2709
PC3210
µ
PC2710
µ
30
20
10
0
–10
–20 7
Maximum output power P
o(sat)
(dBm)
Frequency f (MHz)
10 30 50 70 100 300 500 700 1G 3G 5G
PC2771
µ
PC2762
µ
PC2749
µ
PC2746
µ
PC2763
µ
PC2745
µ
PC2747
µ
PC2748
µ
334 Selection Guide X10679EJHV0SG00
RF and Microwave Devices
IC
■Typical Characteristics
• CONVERSION GAIN, NOISE FIGURE vs. FREQUENCY
30
25
20
15
10
5
0200 400 600 800 1000
µ
PC2743
µ
CG: PC1686
µ
CG: PC1694
µ
CG: PC1685
µ
NF: PC1694
µ
NF: PC1686
µ
NF: PC1687
µ
NF: PC1685
Conversion Gain CG (dB)
Noise Figure NF (dB)
Frequenc
y
f (MHz)
µ
PC2744
CG: PC1687
µ
CG: PC2794
µ
µ
CG: PC2775/ PC2797
µ
µ
NF: PC2775
µµ
NF: PC2794/ PC2797
• INPUT LEVEL vs. FREQUENCY
P max.
in
P min.
in
40
20
0
-20
-40
-60 7 10 30 50 70 100 300 500 700 1G 3G 5G
Input Level P (dBm)
Frequency f (MHz)
in
µ
µ
PB1506/1507
PB1505/10
µ
PB1508
µ
PB1504
µ
PB1509
Selection Guide X10679EJHV0SG00 335
RF and Microwave Devices
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
3SK177 TV/VCR Tuner 5 10 900 NF=1.1dB 4-pin minimold
(NE25139)
3SK206 TV/VCR Tuner 5 10 900 NF=1.1dB
(NE25339)
3SK299 TV/VCR Tuner 5 10 900 NF=1.1dB 4-pin super
(NE25118) minimold
• Dual Gate MOS FET
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
3SK131 TV/VCR Tuner 10 10 200 NF=1.3dB 4-pin minimold
(NE92939)
3SK134B TV/VCR Tuner 10 10 900 NF=2.1dB
(NE92739)
3SK135A TV/VCR Tuner 10 10 900 NF=2.7dB
3SK176A TV/VCR Tuner 6 3 470 NF=2.0dB
3SK222 TV/VCR Tuner 6 10 200 NF=1.2dB
(NE92039)
3SK223 TV/VCR Tuner 6 10 470 NF=2.2dB
(NE92239)
3SK224 TV/VCR Tuner 6 10 900 NF=1.8dB
(NE92439)
3SK230 TV/VCR Tuner 6 10 470 NF=2.2dB
(NE93039)
3SK231 TV/VCR Tuner 6 10 900 NF=2.0dB
(NE93139)
3SK252 TV/VCR Tuner 3.5 7 470 NF=2.0dB
(NE93239)
3SK253 TV/VCR Tuner 3.5 7 900 NF=1.8dB
(NE93339)
3SK254 TV/VCR Tuner 3.5 7 470 NF=2.0dB 4-pin super
(NE93218) minimold
3SK255 TV/VCR Tuner 3.5 7 900 NF=1.8dB
(NE93318)
■Dual Gate MES/MOS FET
• Dual Gate MES FET
RF and Microwave Devices
336 Selection Guide X10679EJHV0SG00
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
2SC1927 (NE73440B) General Purpose 10 10 – 2 × 2SC1275 40(Ceramic)
2SC2148 (NE73435) General Purpose 10 3 500 NF=2.1dB
µ
–X
2SC2149 (NE02135) General Purpose 10 20 2000 NF=2.6dB
2SC2351 (NE02133) General Purpose 10 5 1000 NF=1.5dB 3-pin minimold
2SC2954 General Purpose 10 30 500 NF=2.4dB Power minimold
2SC3355 (NE85632) General Purpose 10 7 1000 NF=1.1dB TO-92
2SC3356 (NE85633) General Purpose 10 7 1000 NF=1.1dB 3-pin minimold
2SC3357 (NE85634) General Purpose 10 7 1000 NF=1.1dB Power minimold
2SC3545 (NE94433) General Purpose 10 –5 31.9 Cc·rbb’=4ps 3-pin minimold
2SC3582 (NE68132) General Purpose 8 7 1000 NF=1.2dB TO-92
2SC3583 (NE68133) General Purpose 8 7 1000 NF=1.2dB 3-pin minimold
2SC3585 (NE68033) General Purpose 6 5 2000 NF=1.8dB
2SC3587 (NE68035) General Purpose 6 5 2000 NF=1.7dB
µ
–X
2SC3603 (NE85635) General Purpose 10 7 2000 NF=2.1dB
2SC3604 (NE68135) General Purpose 8 7 2000 NF=1.6dB
2SC3663 General Purpose 1 0.25 1000 NF=3.0dB 3-pin minimold
2SC3809 (NE85641) General Purpose 10 20 – 2 × 2SC3603 41(Ceramic)
2SC3810 (NE68141) General Purpose 8 20 – 2 × 2SC3604
2SC3841 General Purpose 10 –5 31.9 Cc·rbb’=4ps 3-pin minimold
2SC4092 (NE02139E) General Purpose 10 5 1000 NF=1.5dB 4-pin minimold
2SC4093 (NE85639E) General Purpose 10 7 1000 NF=1.1dB
2SC4094 (NE68139E) General Purpose 8 7 1000 NF=1.2dB
2SC4095 (NE68039E) General Purpose 6 5 2000 NF=1.8dB
2SC4182 General Purpose 3 –5 31.9 Cc·rbb’=9ps 3-pin super
2SC4183 (NE58030) General Purpose 5 2 900 NF=3.0dB minimold
2SC4184 General Purpose 3 –5 31.9 Cc·rbb’=3.5ps
2SC4185 (NE73430) General Purpose 10 5 1000 fT=2GHz
2SC4186 General Purpose 10 –5 31.9 Cc·rbb’=5ps (MAX.)
2SC4187 (NE68330) General Purpose 1 0.25 1000 NF=3.0dB
2SC4225 General Purpose 3 5 1000 NF=1.5dB
2SC4226 (NE85630) General Purpose 3 7 1000 NF=1.2dB
2SC4227 (NE68130) General Purpose 3 7 1000 NF=1.4dB
2SC4228 (NE68030) General Purpose 3 5 2000 NF=1.9dB
2SC4536 (NE46134) General Purpose 10 50 500 NF=2.5dB Power minimold
2SC4568 (NE58133) General Purpose 10 5 1000 |S21e|2=5.0dB (MIN.) 3-pin minimold
2SC4569 (NE58233) General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.)
2SC4570 (NE58130) General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.) 4-pin minimold
2SC4571 (NE58230) General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.)
2SC4703 (NE46234) General Purpose 5 50 1000 NF=2.3dB Power minimold
2SC4885 (NE61030) General Purpose 5 5 1000 NF=3.0dB 4-pin minimold
2SC4954 (NE68433) General Purpose 3 3 2000 NF=2.5dB
2SC4955 (NE68533) General Purpose 3 3 2000 NF=1.5dB
2SC4956 (NE68439E) General Purpose 3 3 2000 NF=2.5dB
2SC4957 (NE68539E) General Purpose 3 3 2000 NF=1.5dB
2SC4958 (NE68430) General Purpose 3 3 2000 NF=2.5dB
2SC4959 (NE68530) General Purpose 3 3 2000 NF=1.5dB
2SC5004 (NE58219) General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.) 3-pin ultra super
2SC5005 (NE58119) General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.) minimold
2SC5006 (NE85619) General Purpose 3 7 1000 NF=1.2dB
2SC5007 (NE68119) General Purpose 3 7 1000 NF=1.4dB
2SC5008 (NE68019) General Purpose 3 5 2000 NF=1.9dB
2SC5009 (NE68419) General Purpose 3 3 2000 NF=2.5dB
2SC5010 (NE68519) General Purpose 3 3 2000 NF=1.5dB
■Low Noise BIP. TR. (2SC, NE) (1/2)
Selection Guide X10679EJHV0SG00 337
RF and Microwave Devices
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
2SC5011 (NE85618) General Purpose 10 7 1000 NF=1.1dB 4-pin super
2SC5012 (NE68118) General Purpose 8 7 1000 NF=1.2dB minimold
2SC5013 (NE68018) General Purpose 6 5 2000 NF=1.8dB
2SC5014 (NE68418) General Purpose 3 3 2000 NF=2.5dB
2SC5015 (NE68518) General Purpose 3 3 2000 NF=1.5dB
2SC5177 (NE68633) General Purpose 1 3 2000 NF=1.5dB 3-pin minimold
2SC5178 (NE68639) General Purpose 1 3 2000 NF=1.5dB 4-pin minimold
2SC5179 (NE68630) General Purpose 1 3 2000 NF=1.5dB 3-pin super
minimold
2SC5180 (NE68618) General Purpose 1 3 2000 NF=1.5dB 4-pin super
minimold
2SC5181 (NE68619) General Purpose 1 3 2000 NF=1.5dB 3-pin ultra super
minimold
2SC5182 (NE68733) General Purpose 1 3 2000 NF=1.3dB 3-pin minimold
2SC5183 (NE68739) General Purpose 1 3 2000 NF=1.3dB 4-pin minimold
2SC5184 (NE68730) General Purpose 1 3 2000 NF=1.3dB 3-pin super
minimold
2SC5185 (NE68718) General Purpose 1 3 2000 NF=1.3dB 4-pin super
minimold
2SC5186 (NE68719) General Purpose 1 3 2000 NF=1.3dB 3-pin ultra super
minimold
2SC5191 (NE68833) General Purpose 3 7 2000 NF=1.5dB 3-pin minimold
2SC5192 (NE68839) General Purpose 3 7 2000 NF=1.5dB 4-pin minimold
2SC5193 (NE68830) General Purpose 3 7 2000 NF=1.5dB 3-pin super
minimold
2SC5194 (NE68818) General Purpose 3 7 2000 NF=1.5dB 4-pin super
minimold
2SC5195 (NE68819) General Purpose 3 7 2000 NF=1.5dB 3-pin ultra super
minimold
2SC5336 General Purpose 10 20 1000 |S21e|2=12dB (TYP.) 4-pin power
2SC5337 General Purpose 10 50 1000 |S21e|2=7.0dB (MIN.) minimold
2SC5338 General Purpose 5 50 1000 |S21e|2=8.5dB (MIN.)
2SC5369 (NE696M01) General Purpose 3 3 2000 NF=1.3dB 6-pin super
2SC5408 Mobile Comm. 2 1 2000 NF=1.1dB minimold
LNA PA-Driver
2SC5409 Mobile Comm. 2 3 2000 NF=1.1dB
LNA PA-Driver
2SC5431 Mobile Comm. VCO 5 5 1000 |S21e|2=5.0dB (MIN.) 3-pin thin-type
2SC5432 Mobile Comm. VCO 3 7 1000 NF=1.4dB ultra super
2SC5433 Mobile Comm. VCO 3 7 1000 NF=1.4dB minimold
2SC5434 Mobile Comm. VCO 3 5 2000 NF=1.9dB
2SC5435 Mobile Comm. VCO 3 3 2000 NF=1.5dB
2SC5436 Mobile Comm. VCO 2 3 2000 NF=1.4dB
2SC5437 Mobile Comm. VCO 1 3 2000 NF=1.9dB
2SC5454 BS Tuner Buff Amp. 3 5 2000 NF=1.5dB 4-pin minimold
2SC5455 BS Tuner Buff Amp. 3 7 2000 NF=1.5dB
2SC5507 LNA, VCO 2 2 2000 NF=1.2dB 4-pin thin-type
2SC5508 LNA, VCO 2 5 2000 NF=1.1dB super minimold
2SC5509 Buff Amp. 2 10 2000 NF=1.2dB
■Low Noise BIP. TR. (2SC, NE) (2/2)
RF and Microwave Devices
338 Selection Guide X10679EJHV0SG00
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
µ
PA800T General Purpose 1 3 2000 NF=1.9dB 6-pin super
µ
PA801T General Purpose 3 7 1000 NF=1.2dB minimold
µ
PA801TC General Purpose 3 7 1000 NF=1.2dB 6-pin thin-type ultra
super minimold
µ
PA802T General Purpose 3 7 1000 NF=1.4dB 6-pin super
µ
PA803T General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.) minimold
µ
PA804T General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.)
µ
PA804TC General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.) 6-pin thin-type ultra
super minimold
µ
PA805T General Purpose 3 3 2000 NF=2.5dB 6-pin super
µ
PA806T General Purpose 3 3 2000 NF=1.5dB minimold
µ
PA807T General Purpose 2 3 2000 NF=1.5dB
µ
PA808T General Purpose 2 3 2000 NF=1.3dB
µ
PA809T General Purpose 1 3 2000 NF=1.7dB
µ
PA810T General Purpose 3 7 1000 NF=1.2dB
µ
PA810TC General Purpose 3 7 1000 NF=1.2dB 6-pin thin-type ultra
super minimold
µ
PA811T General Purpose 3 5 2000 NF=1.9dB 6-pin super
µ
PA812T General Purpose 3 7 1000 NF=1.4dB minimold
µ
PA813T General Purpose 5 5 1000 |S21e|2=5.0dB (MIN.)
µ
PA814T General Purpose 3 7 2000 NF=1.5dB
µ
PA814TC General Purpose 3 7 2000 NF=1.5dB 6-pin thin-type ultra
µ
PA821TC Mobile Comm. VCO 3 7 1000 NF=1.2dB super minimold
µ
PA821TF Mobile Comm. VCO 3 7 1000 NF=1.2dB 6-pin thin-type
super minimold
µ
PA826TC Mobile Comm. VCO 3 3 2000 NF=1.5dB 6-pin thin-type ultra
super minimold
µ
PA826TF Mobile Comm. VCO 3 3 2000 NF=1.5dB 6-pin thin-type
µ
PA827TF Mobile Comm. VCO 2 3 2000 NF=1.5dB super minimold
µ
PA828TF Mobile Comm. VCO 2 3 2000 NF=1.3dB
µ
PA831TC Mobile Comm. VCO Q1:3, Q2:3 Q1:7, Q2:7 Q1:1000, Q1:NF=1.2dB 6-pin thin-type
Q2:1000 Q2:NF=1.4dB super minimold
µ
PA831TF Mobile Comm. VCO Q1:3, Q2:3 Q1:7, Q2:7 Q1:1000, Q1:NF=1.2dB 6-pin thin-type
Q2:1000 Q2:NF=1.4dB super minimold
µ
PA832TF Mobile Comm. VCO Q1:3, Q2:3 Q1:7, Q2:3 Q1:1000, Q1:NF=1.2dB
Q2:2000 Q2:NF=1.5dB
µ
PA833TF Mobile Comm. VCO Q1:1, Q2:3 Q1:3, Q2:3 Q1:2000, Q1:NF=1.7dB
Q2:2000 Q2:NF=1.5dB
µ
PA834TF Mobile Comm. VCO Q1:3, Q2:3 Q1:7, Q2:7 Q1:1000, Q1:NF=1.4dB
Q2:1000 Q2:NF=1.2dB
µ
PA835TC Mobile Comm. VCO Q1:3, Q2:3 Q1:3, Q2:7 Q1:2000, Q1:NF=1.5dB 6-pin thin-type ultra
Q2:1000 Q2:NF=1.2dB super minimold
µ
PA835TF Mobile Comm. VCO Q1:3, Q2:3 Q1:3, Q2:7 Q1:2000, Q1:NF=1.5dB 6-pin thin-type
Q2:1000 Q2:NF=1.2dB super minimold
µ
PA836TC Mobile Comm. VCO Q1:3, Q2:1 Q1:3, Q2:3 Q1:2000, Q1:NF=1.5dB 6-pin thin-type ultra
Q2:2000 Q2:NF=1.7dB super minimold
µ
PA836TF Mobile Comm. VCO Q1:3, Q2:1 Q1:3, Q2:3 Q1:2000, Q1:NF=1.5dB 6-pin thin-type
Q2:2000 Q2:NF=1.7dB super minimold
µ
PA840TC Mobile Comm. VCO Q1:3, Q2:3 Q1:3, Q2:7 Q1:2000, Q1:NF=1.5dB 6-pin thin-type ultra
Q2:1000 Q2:NF=1.4dB super minimold
■Twin TR. (
µ
PA×××)
Selection Guide X10679EJHV0SG00 339
RF and Microwave Devices
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
NE674 General Purpose 3 10 4000–12000 NF=1.4dB, Chip, 83B
GaAs FET Ga=10dB@f=12GHz
NE71300 General Purpose 3 10 12000 NF=1.6dB Chip
GaAs FET
NE71383B General Purpose 3 10 12000 NF=1.6dB 83B
GaAs FET
NE76118 General Purpose 3 10 2000 NF=0.8dB 18
GaAs FET
NE23383B General Purpose 2 10 4000–12000 NF=0.35dB, 83B
HJ-FET Ga=15dB@f=4GHz
NE24200 General Purpose 2 10 12000 NF=0.6dB Chip
HJ-FET
NE24283B General Purpose 2 10 4000–18000 NF=0.6dB, 83B
HJ-FET Ga=11dB@f=12GHz
NE27200 General Purpose 2 10 12000 NF=0.45dB Chip
HJ-FET
NE32500 General Purpose 2 10 12000 NF=0.45dB
HJ-FET
NE32900 General Purpose 2 10 4000–18000 NF=0.35dB,
HJ-FET Ga=13dB@f=12GHz
NE34018 Mobile Comm. 2 5 800–3000 NF=0.6dB, Ga=16dB, 18
HJ-FET Gs=18dB@f=2GHz
NE38018 Mobile Comm. 2 5 800–3000 NF=0.55dB, Ga=14.5dB,
HJ-FET Gs=16dB@f=2GHz
NE72118 BS Converter 3 30 4000–12000 Gs=5.5dB,
OSC Stage Po(1dB)=13.5dBm@=12GHz
GaAs FET
NE721S01 BS Converter 3 30 12000 Gs=7dB S01
OSC Stage
GaAs FET
NE72218 BS Converter 3 30 4000–12000 Gs=4.5dB, 18
OSC Stage Po(1dB)=15.0dBm@=12GHz
GaAs FET
NE76000 BS Converter 3 10 12000 NF=1.6dB Chip
GaAs FET
NE76038 BS Converter 3 10 12000 NF=1.7dB 38
GaAs FET
NE76083A BS Converter 3 10 12000 NF=1.6dB 83A
GaAs FET
NE76084 BS Converter 3 10 12000 NF=1.6dB 84
GaAs FET
NE76184A BS Converter 3 10 4000 NF=0.8dB, Ga=12dB 84A
GaAs FET
NE32484A BS Converter 2 10 12000 NF=0.6dB, Ga=11.0dB
HJ-FET
NE32584C BS Converter 2 10 12000 NF=0.45dB, Ga=12.5dB 84C
HJ-FET
NE325S01 BS Converter 2 10 12000 NF=0.45dB, Ga=12.5dB S01
HJ-FET
NE329S01 BS Converter 2 10 4000–18000 NF=0.35dB,
HJ-FET Ga=13.0dB@f=12GHz
NE3210S01 BS Converter 2 10 4000–18000 NF=0.35dB,
HJ-FET Ga=13.5dB@f=12GHz
NE33284A BS Converter 2 10 4000 NF=0.35dB, Ga=15.0dB 84A
HJ-FET
NE334S01 BS Converter 2 15 4000 NF=0.25dB, Ga=16.0dB S01
HJ-FET
■Low Noise GaAs/HJ FET (NE) (1/2)
RF and Microwave Devices
340 Selection Guide X10679EJHV0SG00
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
NE42484A BS Converter 2 10 12000 NF=0.8dB, Ga=10.5dB 84A
HJ-FET
NE42484C BS Converter 2 10 12000 NF=0.7dB, Ga=12.0dB 84C
HJ-FET
NE425S01 BS Converter 2 10 12000 NF=0.6dB, Ga=12.0dB S01
HJ-FET
NE428M01 BS Converter 2 10 4000–12000 NF=0.9dB, M01
HJ-FET Ga=8.5dB@f=12GHz
NE429M01 BS Converter 2 10 4000–12000 NF=0.9dB,
HJ-FET Ga=10dB@f=12GHz
NE4210M01 BS Converter 2 10 4000–12000 NF=0.8dB,
HJ-FET Ga=11dB@f=12GHz
NE434S01 BS Converter 2 15 4000 NF=0.35dB, Ga=15.5dB S01
HJ-FET
■Low Noise GaAs/HJ FET (NE) (2/2)
Selection Guide X10679EJHV0SG00 341
RF and Microwave Devices
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
2SC5288 (NE68939) General Purpose 3.6 lq=1 1900 Pin(1dB)=24dBm (class AB) 4-pin minimold
Medium Po. Bip. Tr.
2SC5289 (NE69039) General Purpose 3.6 lq=1 1900 Pin(1dB)=27dBm (class AB)
Medium Po. Bip. Tr.
NE850R599A C-Band Po. Amp. 10 100 2000–10000 Po(1dB)=25.5dBm 99
Power GaAs FET
NE8500199 C-Band Po. Amp. 10 200 2000–10000 Po(1dB)=28.5dBm
Power GaAs FET
NE8500295-4 C-Band Po. Amp. 10 450 3500–5500 Po(1dB)=33.8dBm 95
Power GaAs FET
NE8500295-6 C-Band Po. Amp. 10 450 5500–7500 Po(1dB)=33.8dBm
Power GaAs FET
NE8500295-8 C-Band Po. Amp. 10 450 7500–8500 Po(1dB)=33.5dBm
Power GaAs FET
NEZ3642-15D C-Band Po. Amp. 10 6000 3600–4200 Po(1dB)=42.5dBm T-65
Power GaAs FET
NEZ3642-15DD C-Band Po. Amp. 10 6000 3600–4200 Po(1dB)=42.5dBm
Power GaAs FET
NEZ3642-4D C-Band Po. Amp. 10 1500 3600–4200 Po(1dB)=36.5dBm T-61
Power GaAs FET
NEZ3642-8D C-Band Po. Amp. 10 3000 3600–4200 Po(1dB)=39.5dBm
Power GaAs FET
NEZ3642-8DD C-Band Po. Amp. 10 3000 3600–4200 Po(1dB)=39.5dBm
Power GaAs FET
NEZ4450-15D C-Band Po. Amp. 10 6000 4400–5000 Po(1dB)=42.5dBm T-65
Power GaAs FET
NEZ4450-15DD C-Band Po. Amp. 10 6000 4400–5000 Po(1dB)=42.5dBm
Power GaAs FET
NEZ4450-4D C-Band Po. Amp. 10 1500 4400–5000 Po(1dB)=36.5dBm T-61
Power GaAs FET
NEZ4450-4DD C-Band Po. Amp. 10 1500 4400–5000 Po(1dB)=36.5dBm
Power GaAs FET
NEZ4450-8D C-Band Po. Amp. 10 3000 4400–5000 Po(1dB)=39.5dBm
Power GaAs FET
NEZ4450-8DD C-Band Po. Amp. 10 3000 4400–5000 Po(1dB)=39.5dBm
Power GaAs FET
NEZ5964-15D C-Band Po. Amp. 10 6000 5900–6450 Po(1dB)=42.5dBm T-65
Power GaAs FET
NEZ5964-15DD C-Band Po. Amp. 10 6000 5900–6450 Po(1dB)=42.5dBm
Power GaAs FET
NEZ5964-4D C-Band Po. Amp. 10 1500 5900–6450 Po(1dB)=36.5dBm T-61
Power GaAs FET
NEZ5964-4DD C-Band Po. Amp. 10 1500 5900–6450 Po(1dB)=36.5dBm
Power GaAs FET
NEZ5964-8D C-Band Po. Amp. 10 3000 5900–6450 Po(1dB)=39.5dBm
Power GaAs FET
NEZ5964-8DD C-Band Po. Amp. 10 3000 5900–6450 Po(1dB)=39.5dBm
Power GaAs FET
NEZ6472-15D C-Band Po. Amp. 10 6000 6400–7200 Po(1dB)=42.5dBm T-65
Power GaAs FET
NEZ6472-15DD C-Band Po. Amp. 10 6000 6400–7200 Po(1dB)=42.5dBm
Power GaAs FET
■Power TR./FET (2SC, NE, NEL, NEM, NES, NEZ) (1/3)
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
RF and Microwave Devices
342 Selection Guide X10679EJHV0SG00
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
NEZ6472-4D C-Band Po. Amp. 10 1500 6400–7200 Po(1dB)=36.5dBm T-61
Power GaAs FET
NEZ6472-4DD C-Band Po. Amp. 10 1500 6400–7200 Po(1dB)=36.5dBm
Power GaAs FET
NEZ6472-8D C-Band Po. Amp. 10 3000 6400–7200 Po(1dB)=39.5dBm
Power GaAs FET
NEZ6472-8DD C-Band Po. Amp. 10 3000 6400–7200 Po(1dB)=39.5dBm
Power GaAs FET
NEZ7177-4D C-Band Po. Amp. 10 1500 7100–7700 Po(1dB)=36.5dBm
Power GaAs FET
NEZ7177-4DD C-Band Po. Amp. 10 1500 7100–7700 Po(1dB)=36.5dBm
Power GaAs FET
NEZ7177-8D C-Band Po. Amp. 10 3000 7100–7700 Po(1dB)=39.5dBm
Power GaAs FET
NEZ7177-8DD C-Band Po. Amp. 10 3000 7100–7700 Po(1dB)=39.5dBm
Power GaAs FET
NEZ7785-15D C-Band Po. Amp. 10 6000 7700–8500 Po(1dB)=42.5dBm T-65
Power GaAs FET
NEZ7785-4D C-Band Po. Amp. 10 1500 7700–8500 Po(1dB)=36.5dBm T-61
Power GaAs FET
NEZ7785-4DD C-Band Po. Amp. 10 1500 7700–8500 Po(1dB)=36.5dBm
Power GaAs FET
NEZ7785-8D C-Band Po. Amp. 10 3000 7700–8500 Po(1dB)=39.5dBm
Power GaAs FET
NEZ7785-8DD C-Band Po. Amp. 10 3000 7700–8500 Po(1dB)=39.5dBm
Power GaAs FET
NE1280100 K-Band Medium 5 60 18700 Pout=21.5dBm Chip
Po. Amp.
Power GaAs FET
NE1280200 K-Band Medium 5 120 18700 Pout=24.5dBm
Po. Amp.
Power GaAs FET
NE1280400 K-Band Medium 5 240 18700 Pout=27.5dBm
Po. Amp.
Power GaAs FET
NEZ1414-2E Ku-Band Po. Amp. 9 700 14000–14500 Po(1dB)=34.0dBm T-78
Power GaAs FET
NEZ1414-3E Ku-Band Po. Amp. 10 700 14000–14500 Po(1dB)=34.0dBm
Power GaAs FET
NEZ1414-4E Ku-Band Po. Amp. 9 1000 14000–14500 P o=37.5dBm
Power GaAs FET
NEZ1414-5E Ku-Band Po. Amp. 10 1500 14000–14500 Po(1dB)=37.0dBm
Power GaAs FET
NEZ1414-8E Ku-Band Po. Amp. 9 2800 14000–14500 P o=39.5dBm T-61
Power GaAs FET
2SC3817 L-Band Po. Amp. 13.5 Iq=3 1550 Pout=30dBm (Class AB) 81 (Ceramic)
(NEL150181-12) Power Bip. Tr.
NEL2001 L-Band Po. Amp. 24 Iq=20 1970 Pin(1dB)=2.5W (Class AB) 01
Power Bip. Tr.
NEL2004 L-Band Po. Amp. 24 Iq=40 1970 Pin(1dB)=7W (Class AB) F02
Power Bip. Tr.
NEL2012 L-Band Po. Amp. 24 Iq=75 1970 Pin(1dB)=16W (Class AB)
Power Bip. Tr.
NEL2012F03-24 L-Band Po. Amp. 24 Iq=75 1970 Pin(1dB)=16W F03
Power Bip. Tr.
NEL2035 L-Band Po. Amp. 24 Iq=100 1970 Pin(1dB)=33W (Class AB)
Power Bip. Tr.
■Power TR./FET (2SC, NE, NEL, NEM, NES, NEZ) (2/3)
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
<
=
Selection Guide X10679EJHV0SG00 343
RF and Microwave Devices
Discrete
Supply Supply Operating
Part Number Applications Voltage Current Frequency Performances Package
(V) (mA) (MHz)
NE650R279A L, S-Band Po. Amp. 6 50 800–2500 Po(1dB)=23dBm, GL=16dB, 79A
Power GaAs FET ηadd=45%@f=1.9GHz
NE650R479A L, S-Band Po. Amp. 6 100 800–2500 P o(1dB)=26dBm, GL=14dB,
Power GaAs FET ηadd=45%@f=1.9GHz
NE6500379A L, S-Band Po. Amp. 6 500 800–2500 P o(1dB)=35dBm, GL=10dB,
Power GaAs FET ηadd=50%@f=1.9GHz
NE6500496 L, S-Band Po. Amp. 10 400 2300 Po(1dB)=36dBm 96
Power GaAs FET
NE6501077 L, S-Band Po. Amp. 10 1000 2300 Po(1dB)=39.5dBm 77
Power GaAs FET
NE651R479A L-Band Po. Amp. 3.5 230 800–2500 Po=27dBm, GL=12dB, 79A
Power GaAs HJ-FET ηadd=60%@f=1.9GHz
NE6510179A L-Band Po. Amp. 3.5 200 800–2500 Po=32.5dBm, GL=10dB,
Power GaAs HJ-FET ηadd=58%@f=1.9GHz
NE6510379A L-Band Po. Amp. 3.5 760 800–2500 Po=32.5dBm, GL=8dB,
Power GaAs HJ-FET ηadd=52%@f=1.9GHz
NES1417B-30 L-Band Po. Amp. 10 1000 1500 Po=45dBm T-79
Power GaAs FET
NES1821B-30 L-Band Po. Amp. 10 1000 1900 Po=45dBm
Power GaAs FET
NES1821P-30 L, S-Band Po. Amp. 10 4000 1800-2300 Po=45dBm, GL=13dB, T-86
Power GaAs FET ηD=40%@f=1.96GHz
NES1821P-50 L, S-Band Po. Amp. 10 2000 1800-2200 Po=47dBm, GL=10.5dB,
Power GaAs FET ηD=52%@f=1.96GHz
NES1823P-100 L, S-Band Po. Amp. 10 6000 1800-2300 Po=50dBm, GL=11dB, T-92
Power GaAs FET ηD=50%@f=2.2GHz
NES2527B-30 S-Band Po. Amp. 10 6000 2500-2700 Po(1dB)=45.0dBm T-79
Power GaAs FET
2SC2586 UHF Po. Amp. 12.6 – 500 P out=32dBm (Class C) CAN
(NE050214E-12) Power Bip. Tr.
2SC2762 UHF Po. Amp. 12.6 – 500 P out=31.5dBm (Class C)
(NE050214-12) Power Bip. Tr.
2SC3218-M UHF Po. Amp. 28 Iq=2×150 860 Pout=47.2dBm (Class AB) 68 (Ceramic)
(NEM085068-28) Power Bip. Tr.
2SC3286-M VHF Po. Amp. 28 Iq=2 ×500 230 Pout=51.4dBm (Class AB) Ceramic
(NEM0214068-28) Power Bip. Tr.
NEM0899F06-30 UHF Po. Amp. 30 Iq=2×150 860 Pout=100W F06
Power Bip. Tr.
NEM0995F06-30 UHF Po. Amp. 30 Iq=2×200 960 Pout=90W
Power Bip. Tr.
2SK2597 UHF Po. Amp. 30 Iq=2×200 960 Po=90W F01
(NEM0995F01-30) Power MOS FET
NEZ1011-2E X-Band Po. Amp. 9 700 10700–11700 Po(1dB)=34.5dBm T-78
Power GaAs FET
NEZ1011-3E X-Band Po. Amp. 10 700 10700–11700 Po(1dB)=34.0dBm
Power GaAs FET
NEZ1011-4E X-Band Po. Amp. 9 1000 10700–11700 Po=36.5dBm,
Power GaAs FET GL=8.0dB@f=10.7–11.7GHz
NEZ1011-5E X-Band Po. Amp. 10 1500 10700–11700 Po(1dB)=37.0dBm
Power GaAs FET
NEZ1011-8E X-Band Po. Amp. 9 2000 10700–11700 Po=40.5dBm T-61
Power GaAs FET
NE960R275 X, Ku-Band Po. Amp. 9 90 8000–16000 Po(1dB)=25.0dBm 75
Power GaAs FET
NE960R575 X, Ku-Band Po. Amp. 9 180 8000–16000 Po(1dB)=27.5dBm
Power GaAs FET
■Power TR./FET (2SC, NE, NEL, NEM, NES, NEZ) (3/3)
<
=
<
=
RF and Microwave Devices
344 Selection Guide X10679EJHV0SG00
Discrete
Remarks 4-pin minimold 4-pin super minimold
Wg = 400
µ
m3SK177 3SK299
Wg = 800
µ
m3SK206
■Cross-reference Table
• Dual Gate MES FET
Applications 4-pin minimold 4-pin super minimold
VHF Band (to 200 MHz) 3SK131 3SK242
3SK222 3SK246
CATV Band (to 470 MHz) 3SK223 3SK243
3SK230
3SK252 3SK254
UHF Band (to 900 MHz) λ/4 matching 3SK135A
3SK224 3SK244
3SK231
3SK253 3SK255
λ/2 matching 3SK134B 3SK245
Remark: Devices listed in the same row are the same chip.
Example: 3SK131, 3SK242
• Dual Gate MOS FET
Applications
• Dual Gate MES/MOS FET, Low Noise BIP. TR. (for TV tuner)
MIX
VHF band
3SK131
3SK222
3SK223
3SK230
3SK252
3SK131 3SK254
3SK242
2SC4182
2SC4184
2SC4182
2SC4184
2SC4183
3SK255
3SK135A
3SK224
3SK231
3SK253
3SK134B
3SK177
3SK206
2SC4183
2SC4185
2SC4184
2SC4186
2SC4182
2SC4184
2SC4185
2SC3545
2SC3841
2SC3545
2SC3545
2SC3545
2SC3841
OSC
RF
(
λ
/2)
RF
(GaAs FET)
MIX
UHF band
RF
(
λ
/4)
OSC
RF
BIP. TR. Dual Gate FET
Minimold
(3-pin) Small minimold
(3-pin) Minimold
(4-pin) Super minimold
(4-pin)
Selection Guide X10679EJHV0SG00 345
RF and Microwave Devices
Discrete
■Cross-reference Table
• Low Noise BIP. TR. (1/2)
Electrical CharacteristicsPart Number Ultra super
minimold
Super minimoldMinimold
3-pin 4-pin 4-pin3-pin 3-pin fT (GHz) NF (dB)
TO-92
2SC3355
2SC2570A
2SC2570A
2SC3355
2SC2570A
Applications
2SC3356
2SC2351
2SC2351
2SC3356
2SC2351
2SC3545
2SC4568
2SC4569
2SC4093
2SC4092
2SC4092
2SC4093
2SC4092
2SC4228
2SC4185
2SC4226
2SC4184
2SC4185
2SC4570
2SC4571
2SC4185
2SC5013
2SC5011
2SC5008
2SC5006
2SC5005
2SC5004
7 (20 mA)
5 (20 mA)
2 (5 mA)
5 (20 mA)
7 (20 mA)
5 (20 mA)
1.8 (5 mA)
2 (5 mA)
5.5 (5 mA)
5 (5 mA)
2 (5 mA)
1.1 (1 GHz)
1.5 (1 GHz)
3 (0.5 GHz)
1.5 (1 GHz)
1.1 (1 GHz)
1.5 (1 GHz)
Pre Amp.
Buffer Amp.
1st IF Amp.
1st and 2nd OSC
2nd IF Amp.
• Low Noise BIP. TR. (2/2)
Frequency (MHz)
2000
4000
500
2.5
2SC3604
2SC3587
4.0
2SC2149
3.5
2SC3603
2SC2148
NF (dB)
for pager for VCO for Mobile Communications for VCO
Same Chip Different Chip
Part Number 2SC No. Part Number 2SC No. Part Number 2SC No. Part Number 2SC No. (×2)
(×2) (×2) (×2) Q1 Q2
µ
PA800T, TF 2SC5008
µ
PA811T 2SC5008
µ
PA801T,TC,TF 2SC5006
µ
PA810T,TC,TF 2SC5006
µ
PA821TC, TF 2SC5006
µ
PA831TC, TF 2SC5006 2SC5007
µ
PA802T 2SC5007
µ
PA812T 2SC5007
µ
PA822TF 2SC5007
µ
PA832TF 2SC5006 2SC5010
µ
PA803T 2SC5005
µ
PA813T 2SC5005
µ
PA833TF 2SC5195 2SC5010
µ
PA804T,TC,TF 2SC5004
µ
PA834TF 2SC5007 2SC5006
µ
PA805T 2SC5009
µ
PA835TC, TF 2SC5010 2SC5006
µ
PA806T 2SC5010
µ
PA826TC, TF 2SC5010
µ
PA836TC, TF 2SC5010 2SC5195
µ
PA807T 2SC5181
µ
PA827TF 2SC5181
µ
PA837TF 2SC5181 2SC5195
µ
PA808T 2SC5186
µ
PA828TF 2SC5186
µ
PA838TF 2SC5195 2SC5186
µ
PA809T, TF 2SC5195
µ
PA814T,TC,TF 2SC5195
µ
PA829TF 2SC5195
µ
PA839TF 2SC5008 2SC5006
µ
PA840TC 2SC5010 2SC5007
Package size T : 2.0 × 1.25 × 0.9 (mm)
TC : 1.5 × 1.1 × 0.55 (mm)
TF: 2.0 × 1.25 × 0.6 (mm)
• Twin TR.
B1 B2 E2
Q1 Q2
C1 E1 C2
B1 E1 E2
Q1 Q2
C1 B2 C2
B1 E2 B2
Q1 Q2
C1 E1 C2
RF and Microwave Devices
346 Selection Guide X10679EJHV0SG00
Discrete
■Cross-reference Table
• Low Noise GaAs/HJ FET
0.4 0.5 0.6 0.7 0.8
10
11
12
ASSOCIATED GAIN vs. NOISE FIGURE @ f = 12 GHz
Associated Gain G
a
(dB)
Noise Figure NF (dB)
NE27283B
NE32584C
NE325S01 NE425S01 NE42484C
NE32484A
NE24283B
NE42484A
NE329S01
0.9
0.3
NE4210M01
NE3210S01
13
NE429M01
0.2 0.3 0.4
14
15
16
ASSOCIATED GAIN vs. NOISE FIGURE @ f = 4 GHz
Associated Gain G
a
(dB)
Noise Figure NF (dB)
NE334S01
NE434S01
NE33284A
NE23383B
NE429M01
NE428M01
0.6 0.7 0.8
14
15
16
ASSOCIATED GAIN vs. NOISE FIGURE @ f = 2 GHz
Associated Gain G
a
(dB)
Noise Figure NF (dB)
NE34018
NE76118(MES FET)
NE38018
: In mass production
Selection Guide X10679EJHV0SG00 347
RF and Microwave Devices
Discrete
■Cross-reference Table
• Power TR. (for mobile and portable radio station)
200
100
70
50
30
20
10
7
5
3
2
1
0.1 0.2 0.3 0.5 0.7 1 2 3 5 7 10
2SK2396
2SK2597
Frequency f (GHz)
OUTPUT POWER vs. FREQUENCY
Output Power P (W)
O
V
24 V
28 V
CC
series
series
NEL2035
NEL2012
NEL2004
NEL2001
• Power TR. (for fixed radio station)
Frequency 10 W or higher
2SK2396
2SK2597
NEL2000 SERIES
800 MHz or higher
1900 MHz or higher
900 MHz or higher
Output Power
• Power TR. (for mobile and portable radio station)
Frequency
1000 MHz or higher
0.1 W or higher 1 W or higher
2SC5288
2SC5289
Output Power
RF and Microwave Devices
348 Selection Guide X10679EJHV0SG00
Discrete
■Cross-reference Table
• Power FET
0.0
19.0
43.0
P
o (1dB)
(dBm)
Frequency f (GHz)
2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
25.0
27.0
29.0
31.0
33.0
35.0
37.0
39.0
41.0
45.0
47.0
NE960R275
NEZ4450-15D/15DD
NEZ5964-4D/4DD
NE850R5 series
NE1280100
NE1280200
NE1280400
NE960R575
PG171GV
NEZ1414-8E
NEZ1414-2E
NES1821P-50
NES1417B-30 NES1821B-30
NES1823P-30
NEZ5964-15D/15DD
NEZ3642-15D
NEZ6472-15D/15DD
NEZ7785-15D
NEZ7177-8D/8DD
NEZ7785-8D/8DD
21.0
23.0
P
o (1dB)
vs. FREQUENCY
µ
NE85001 series
NEZ1011-2E
NE6500496
NEZ4450-4D/4DD
NEZ6472-4D/4DD
NEZ1011-8E
NEZ3642-4D/4DD
NEZ5964-8D/8DD NEZ6472-8D/8DD
NEZ7177-4D/4DD
NEZ4450-8D/8DD
NE6501077
NEZ3642-8D/8DD
NES2527B-30
49.0
51.0
NES1823P-100
NE650R279A
NE650R479A
NE651R479A
MC-7660 MC-7661
NE6510179A
NE6500379A
NE6510379A NE85002 series NEZ1414-3E
NEZ1414-5E
NEZ1414-4E
NEZ1011-5E
NEZ1011-4E
NEZ7785-4D/4DD
NEZ1011-3E
Selection Guide X10679EJHV0SG00 349
RF and Microwave Devices
Discrete
■Cross-reference Table
• Silicon Microwave Single Transistor
Package Power MM
New Power
3-pin USMM 3-pin Thin 6-pin SMM 4-pin SMM
µ
-X TO-92 (3-pin) MM 3-pin MM 3-pin SMM 4-pin MM 4-pin SMM (1608) USMM High Gain (R type)
fT (GHz) (4-pin) (1408)
1.0 2SC2758 2SC4183
1.1 2SC2757 2SC4182
2.0 2SC2759 2SC4185
2SC3545 2SC4184
2.8 2SC2148
4.0 2SC2408A 2SC2954
2SC3841 2SC4186
2SC3663 2SC4187 2SC4091
4.5 2SC2149 2SC2351 2SC4225 2SC4092
5.0 2SC2570A
2SC4569 2SC4571 2SC5004 2SC5431
5.3 2SC4536 2SC5337
5.5 2SC4568 2SC4570 2SC5005
6.0 2SC4703 2SC5338
7.0 2SC3603 2SC3355 2SC3357 2SC5336 2SC3356 2SC4226 2SC4093 2SC5011 2SC5006 2SC5432
8.5 2SC3604 2SC3582 2SC3583 2SC4227 2SC4094 2SC5012 2SC5007 2SC5433
10.0*1 2SC3587 2SC3585 2SC4228 2SC4095 2SC5013 2SC5008 2SC5434
2SC5191 2SC5193 2SC5192 2SC5194 2SC5195 2SC5437
11.0 2SC5455
12.0*2 2SC4954 2SC4958 2SC4956 2SC5014 2SC5009
2SC4955 2SC4959 2SC4957 2SC5015 2SC5010 2SC5435
14.0*2 2SC5369
2SC5454
15.5*2 2SC5177 2SC5179 2SC5178 2SC5180 2SC5181
2SC5182 2SC5184 2SC5183 2SC5185 2SC5186 2SC5436
16.0 2SC5409
(
2SC5533
*3)
17.0 2SC5408 2SC5509
25.0 2SC5507
2SC5508
*1: Lower stage: Low operation voltage and low phase noise type.
*2: Upper stage: Low power dissipation type. Lower stage: Low noise figure type.
*3: 2SC5533 is a thin type of 2SC5409.
RF and Microwave Devices
350 Selection Guide X10679EJHV0SG00
Discrete
■Cross-reference Table
• NE Part No.-EIAJ No.
NE Part No.
NE73416
NE73440A
NE73440B
NE73435
NE02135
NE02133
NE050214E-12
NE050214-12
NEM085068-28
NEM0214068-28
NE85632
NE85633
NE85634
NE94433
NE68132
NE68133
NE68033
NE68035
NE85635
NE68135
NE85641
NE68141
NEL150181-12
NE02139E
NE85639E
NE68139
NE68039
NE58030
NE73430
NE68330
NE85630
NE68130
NE68030
NE46134
NE58133
NE58233
NE58130
NE58230
NE46234
NE61030
NE68433
NE68533
NE68439E
NE68539E
NE68430
NE68530
NE58219
NE58119
EIAJ* No.
2SC1733
2SC1926
2SC1927
2SC2148
2SC2149
2SC2351
2SC2586
2SC2762
2SC3218-M
2SC3286-M
2SC3355
2SC3356
2SC3357
2SC3545
2SC3582
2SC3583
2SC3585
2SC3587
2SC3603
2SC3604
2SC3809
2SC3810
2SC3817
2SC4092
2SC4093
2SC4094
2SC4095
2SC4183
2SC4185
2SC4187
2SC4226
2SC4227
2SC4228
2SC4536
2SC4568
2SC4569
2SC4570
2SC4571
2SC4703
2SC4885
2SC4954
2SC4955
2SC4956
2SC4957
2SC4958
2SC4959
2SC5004
2SC5005
* : EIAJ = Electronics Industry Association Japan
NE Part No.
NE85619
NE68119
NE68019
NE68419
NE68519
NE85618
NE68118
NE68018
NE68418
NE68518
NE68633
NE68639
NE68630
NE68618
NE68619
NE68733
NE68739
NE68730
NE68718
NE68719
NE68833
NE68839
NE68830
NE68818
NE68819
NE68939
NE69039
NE696M01
NEM0995F01-30
NE92939
NE92739
NE25139
NE25339
NE92039
NE92239
NE92439
NE93039
NE93139
NE92918
NE92218
NE92418
NE92718
NE92018
NE93239
NE93339
NE93318
NE25118
EIAJ* No.
2SC5006
2SC5007
2SC5008
2SC5009
2SC5010
2SC5011
2SC5012
2SC5013
2SC5014
2SC5015
2SC5177
2SC5178
2SC5179
2SC5180
2SC5181
2SC5182
2SC5183
2SC5184
2SC5185
2SC5186
2SC5191
2SC5192
2SC5193
2SC5194
2SC5195
2SC5288
2SC5289
2SC5369
2SC2597
3SK131
3SK134B
3SK177
3SK206
3SK222
3SK223
3SK224
3SK230
3SK231
3SK242
3SK243
3SK244
3SK245
3SK246
3SK252
3SK253
3SK255
3SK299
Selection Guide X10679EJHV0SG00 351
RF and Microwave Devices
Application
■Digital DBS (1/2)
■Digital DBS (2/2)
HJ-FET
NE425S01
NE4210M01
HJ-FET
NE425S01
NE4210M01
GaAs MMIC
SW+IF Amp.
PG182GR
to IDU
MES-FET
NE72218
NE72118
Parabolic
ANT
SW
Medium Output Amp
PC2709TB
µµ
HJ-FET
NE3210S01
NE329S01
NE325S01
From ODU
Down Converter
PC2795GV
Low Noise Tr.
2SC5015
(NE68518)
Down Converter
+AGC Amp.
PC2782GR
I/Q Demodulator
PC2781GR
I/Q Demodulator
PC2781GR
0°
90°
LPF
LPF
I
Q
SAW
PLL
µ
µ
µ
µ
φ
RF and Microwave Devices
352 Selection Guide X10679EJHV0SG00
Application
■Transceiver Block for Digital Cable Modem/CATV Set-top-box
HPF SAW SAW
LPF
LPF
A/D
RFin
50-750MHz
RF return
5-42MHz
Up Converter Down Converter IF Down Converter
PC2799GR PC1686GV PC2798GR
DUAL
PLL
BIAS
QAM
Demod.
& FEC
QPSK
Modulator
CMOS DSP
PC3211GR
Return Path AGC + Driver
µµ
µ
µ
Selection Guide X10679EJHV0SG00 353
RF and Microwave Devices
Application
■Receiver Block for Digital Cable Modem/CATV Set-top-box (1/2)
■Receiver Block for Digital Cable Modem/CATV Set-top-box (2/2)
HPF SAW SAW
LPF
A/D
PC2799GR PC1686GV PC2798GR
DUAL
PLL
QAM
Demod.
& FEC
Up Converter Down Converter IF Down Converter
µµµ
HPF SAW SAW
LPF
A/D
PC2799GR PC1686GV
PC3206GR
ASIC
50dB AGC
DUAL
PLL
QAM
Demod.
& FEC
Up Converter Down Converter IF AGC + Video Amp.
µµ
µ
RF and Microwave Devices
354 Selection Guide X10679EJHV0SG00
Application
■Terrestrial TV
■Block for Digital Cable Modem/CATV Converter
VHF ANT
UHF ANT
to IF Amp.
to Controller
PC2775, PC2794, PC2797
PC3200, PC3202
µµ
µµ
µ
(5V)
RF Amp.
3SK222
3SK223
PC1686
RF Amp.
3SK224
PSC
+
PLL
µ
PC1687
µ
INPUT L.P.F Preamplifier
2SC4703
2SC5338
PSC Buffer Amp.
2SC4093
µ
PB1506/1507
2SC4093
3SK224
1st OSC 2nd OSC
Up Converter Down Converter
2SC3356
Buffer Amp.
2SC4093
1st MIX 2nd MIX1st IF Amp. 2nd IF Amp.
2SC4093
3SK134B
2SC4093
to TV Channel
Buffer Amp.
2SC4093
Buffer Amp.
2SC4093
2SC3356
Selection Guide X10679EJHV0SG00 355
RF and Microwave Devices
Application
■PDC (RF Modulation System)
■PDC (IF Modulation System)
455kHz
BPF
2nd MIX
SUB ANT
MAIN ANT
PDC 800M Direct Modulation System
EXT
DPDT Switch
PG139GV
SPDT Switch
PG152TA
PG153TB
PG154TA
PG155TB
Down Converter
PC8112TB
2nd MIX
+
IF Amp.
PC8001GR
to DEMOD.
RSSI RSSI OUT
PLL PSC
Up Converter
PC8106TB
PC8109TB
LNA
2SC5015
2SC5185
2SC5369
NE34018
NE38018
Buffer
PC8123TB
PA Driver
PC2771TB
PG170TB
PG173TA
AGC Amp.
PC8130TA
PC8131TA
PG175TA(PDC800M)
AGC + PA Driver
X 2
0°
90°
Direct I/Q Modulator
PC8126K(800MHz)
28-pin QFN
SW
SW
SW
I
Q
µ
µ
µ
µ
µ
µµ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
φ
MCM(PA Module)
[0.2ccPKG]
MC - 7660(PDC800M)
[0.1ccPKG]
MC - 7900(PDC800M)
PC8158K
(28-pin QFN)
SUB ANT
MAIN ANT
DPDT Switch
PG139GV
SPDT Switch
PG152T A
PG153TB
PG154TB
PG155TB
2SC5015
2SC5185
2SC5369
NE34018
NE38018
Down Converter
PC8112TB
SW SW
SW
LNA BPF
455kHz
BPF
RSSI
SAW
2nd LO
1st LO
EXT
PLL1 PLL2
MCM(PA Module)
[ 0.2cc PKG ]
MC-7660(PDC800M)
MC-7661(PDC1.5G)
[ 0.1ccPKG ]
MC-7900(PDC800M)
MC-7901(PDC1.5G)
PA Driver BPF AGC LPF
(C/R)
I
Q
0°
90°
PG173TA(PDC800M) PG174TA(PDC1.5G) PG175TA(PDC800M)
φ
µ
µ
µµ
µ
µ
µµµ
µ
to DEMOD.
RSSI OUT
2nd MIX
1st MIX
2nd MIX + IF Amp.
PC8001GR
µ
RF and Microwave Devices
356 Selection Guide X10679EJHV0SG00
Application
■PHS
■GSM (IF Modulation System)
NE34018 PC8112TB
1st MIX SAW 2nd MIX
ATT
LNA
BPF
10.8MHz
BPF
RSSI
to DEMOD.
RSSI OUT
MAIN ANT
SW SW
1651.2∼1674.0MHz
or
1646.7∼1669.5MHz
2SC5006
PLL1 PLL2 233.15MHz
or
259.25MHz
1662.0 ∼1684.8MHz
or
1635.9 ∼1658.7MHz
243.95MHz
or
248.45MHz
1895.15∼1917.95MHz
or
(1906.55 11.4MHz)
±
AGC
PC8139GR-7JH
PC2771TB
PC2763TB
PG171GV
BPF
LPF
0°
90°
(CR)
Q
I
PG152TA
PG154TB
2nd LO
µ
µ
µ
µ
µ
µµ
φ
1st LO
MAIN ANT LNA
2SC5015
2SC5185
: Under development
2nd MIX + IF Amp.
PC8002GR RSSI
DEMO I
Q
RSSI OUT
SW
SW
SPDT Switch
PG157GV
PLLPLL
Up Converter
PC8106TB
PC8109TB
Power Amp.(Bip.Tr.)
2SC5192 (DECT 1st)
2SC5288 (DECT 2nd)
(PHS 1st)
2SC5289 (DECT 3rd)
(PHS 2nd)
PSC
Down Converter
PC8112TB
0°
90°
X2
Quadrature Mod.
PC8105GR
Up Converter
+
Quadrature Mod.
PC8104GR
BPF
Driver Amp.
PC2763TB
PC2771TB
AGC Amp.
PC8119T
PC8120T
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µµ
Up Converter with
AGC
+ Quadrature Mod.
PC8129GR
φ
★
★
Q
I
Selection Guide X10679EJHV0SG00 357
RF and Microwave Devices
Application
■900 MHz Cordless Phone (1/2)
■900 MHz Cordless Phone (2/2)
MIX
PA Driver BUF
X2
X2
VCO PLL
to DEMOD.
PA82XXTF
PA83XXTF
MOD. in
2SC5369
2SC5408
2SC5409
2SC5369
2SC5408
2SC5409
Down Converter
PC8112T
2SC5288
2SC5289 2SC4093
2SC4094
2SC4958
2SC5179
2SC4093
2SC4094
2SC4958
2SC5179
PA82XXTF
PA83XXTF
OSC
DUP
LNA BPF
µ
µ
µ
µ
µ
MIX
PA BUF
X2
X2
PLL
to DEMOD.
MOD. in
Down Converter
PC8112TB
PA801T
2SC4096
LNASAW
BPF
BPF BPF
Twin Tr.
PA801T
Twin Tr.
PA801T
Twin Tr.
PA801T
µ
µ
µ
µµ
358 Selection Guide X10679EJHV0SG00
[MEMO]
Selection Guide X10679EJHV0SG00 359
Optical Device
Photocoupler................................................................... 360
• Tr. Output Type.......................................................... 360
• IC Output Type........................................................... 369
• Safety Standards Approval List
(Made in Japan, as of January 1999) ..................... 370
• Safety Standards Approval List
(Made in Taiwan, as of January 1999).................... 372
OCMOS FETTM (Opto-Coupled MOS FET Relay) ........ 373
• Safety Standards Approval List
(as of January 1999) ................................................. 377
Infrared Transceivers..................................................... 378
Plastic Fiber Link ........................................................... 378
Visible Lasers ................................................................. 380
Fiberoptic Devices ......................................................... 380
• Lasers (Digital) .......................................................... 380
• Pump Laser................................................................ 381
• Pulsed Lasers for OTDR .......................................... 381
• Detectors .................................................................... 382
8
360 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
PS2501-1 High isolation voltage 5 k 80 80 50 80 to 600 3, 5 4-pin DIP
High VCEO (RL = 100 Ω)
UL approved
PS2501-2 8-pin DIP
PS2501-4 16-pin DIP
PS2511-1 High isolation voltage 50 100 to 300 4-pin DIP
UL approved
PS2511-2 80 to 400 8-pin DIP
PS2511-4 16-pin DIP
PS2561-1 High isolation voltage 80 4-pin DIP
UL, VDE (Option),
CSA, BSI, SEMKO,
PS2561-2 FIMKO, NEMKO, 8-pin DIP
DEMKO approved
PS2571-1 High isolation voltage 50 100 to 300 4-pin DIP
UL, CSA, BSI, SEMKO,
FIMKO, NEMKO,
PS2571-4 DEMKO approved 80 to 400 16-pin DIP
PS2581L1 High isolation voltage 80 80 to 400 4-pin DIP
PS2581L2 Outer creepage
distance: 8 mm
UL, VDE (Standard), CSA,
BSI, SEMKO, FIMKO,
NEMKO, DEMKO approved
PS2601 High isolation voltage 80 to 600 6-pin DIP
High VCEO
UL approved
PS2602 6-pin DIP
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
Standard Type (Single Tr.) (1/2)
Selection Guide X10679EJHV0SG00 361
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
Standard Type (Single Tr.) (2/2)
PS2651 High isolation voltage 5 k 80 80 50 50 to 400 3, 5 6-pin DIP
UL, VDE (Option), CSA, (RL = 100 Ω)
BSI, SEMKO, FIMKO,
PS2652 NEMKO, DEMKO approved 6-pin DIP
PS2701-1 UL, VDE (Option), 3.75 k 50 40 80 50 to 300 3, 5 4-pin SOP
BSI approved (RL = 100 Ω)
PS2701-2 8-pin SOP
PS2701-4 16-pin SOP
PS2801-1 Pin pitch: 1.27 mm 2.5 k 50 80 50 80 to 600 3, 5 4-pin
UL, BSI approved (RL = 100 Ω) Small SOP
PS2801-4 Pin pitch: 1.27 mm 16-pin
UL, VDE (Option), Small SOP
BSI approved
362 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
Standard Type (Darlington Tr.)
PS2502-1 High isolation voltage 5 k 80 40 200 200 or above 100, 100 4-pin DIP
High CTR (RL = 100 Ω)
UL approved
PS2502-2 160 8-pin DIP
PS2502-4 16-pin DIP
PS2562-1 High isolation voltage 200 4-pin DIP
UL, VDE (Option), CSA,
BSI, SEMKO, FIMKO,
PS2562-2 NEMKO, DEMKO approved 160 8-pin DIP
PS2603 High isolation voltage 200 6-pin DIP
High CTR
UL approved
PS2604 6-pin DIP
PS2653 High isolation voltage 6-pin DIP
High CTR
UL, VDE (Option), CSA,
PS2654 BSI, SEMKO, FIMKO, 6-pin DIP
NEMKO, DEMKO approved
PS2702-1 High CTR 3.75 k 50 40 200 200 or above 200, 200 4-pin SOP
UL, VDE (Option), (RL = 100 Ω)
BSI approved
PS2702-2 160 8-pin SOP
PS2702-4 16-pin SOP
PS2802-1 Pin pitch: 1.27 mm 2.5 k 50 40 90 200 or above 200, 200 4-pin
UL, BSI approved (RL = 100 Ω) Small SOP
PS2802-4 Pin pitch: 1.27 mm 100 16-pin
UL, VDE (Option), Small SOP
BSI approved
Selection Guide X10679EJHV0SG00 363
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
AC Input Type (Single Tr.)
PS2505-1 High isolation voltage 5 k ±80 80 50 80 to 600 3, 5 4-pin DIP
AC input (RL = 100 Ω)
High VCEO
PS2505-2 UL approved 8-pin DIP
PS2505-4 16-pin DIP
PS2565-1 High isolation voltage 80 to 400 4-pin DIP
AC input
UL, VDE (Option), CSA,
PS2565-2 BSI, SEMKO, FIMKO, 8-pin DIP
NEMKO, DEMKO approved
PS2605 High isolation voltage 80 to 600 6-pin DIP
AC input
High VCEO
PS2606 UL approved 6-pin DIP
PS2705-1 AC input 3.75 k ±50 40 80 50 to 300 3, 5 4-pin SOP
UL, VDE (Option), (RL = 100 Ω)
BSI approved
PS2705-2 8-pin SOP
PS2705-4 16-pin SOP
PS2805-1 Pin pitch: 1.27 mm 2.5 k ±50 80 50 80 to 600 3, 5 4-pin
AC input (RL = 100 Ω) Small SOP
UL, BSI approved
PS2805-4 Pin pitch: 1.27 mm 16-pin
AC input Small SOP
UL, VDE (Option),
BSI approved
364 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
AC Input Type (Darlington Tr.)
PS2506-1 High isolation voltage 5 k ±80 40 200 200 or above 100, 100 4-pin DIP
AC input (RL = 100 Ω)
High CTR
PS2506-2 UL approved 160 8-pin DIP
PS2506-4 16-pin DIP
PS2566-1 High isolation voltage 200 4-pin DIP
AC input
UL, VDE (Option), CSA,
PS2566-2 BSI, SEMKO, FIMKO, 160 8-pin DIP
NEMKO, DEMKO approved
PS2607 High isolation voltage 200 6-pin DIP
AC input
High CTR
PS2608 UL approved 6-pin DIP
PS2706-1 High CTR 3.75 k ±50 40 200 200 or above 200, 200 4-pin SOP
AC input (RL = 100 Ω)
UL, VDE (Option),
PS2706-2 BSI approved 160 8-pin SOP
PS2706-4 16-pin SOP
PS2806-1 Pin pitch: 1.27 mm 2.5 k ±50 40 90 200 or above 200, 200 4-pin
AC input (RL = 100 Ω) Small SOP
UL, BSI approved
PS2806-4 Pin pitch: 1.27 mm 100 16-pin
AC input Small SOP
UL, VDE (Option),
BSI approved
Selection Guide X10679EJHV0SG00 365
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
Low Input Current Type (Single Tr.)
PS2503-1 High isolation voltage 5 k 80 40 30 100 to 400 20, 30 4-pin DIP
High-speed (RL = 10 kΩ)
UL approved
PS2503-2 8-pin DIP
PS2503-4 16-pin DIP
PS2703-1 High VCEO (120 V) 3.75 k 50 120 30 50 to 400 10, 10 4-pin SOP
UL, VDE (Option), (RL = 1 kΩ)
BSI approved
PS2703-2 8-pin SOP
PS2703-4 16-pin SOP
PS2707-1 AC input ±50 4-pin SOP
High VCEO (120 V)
UL, VDE (Option),
PS2707-2 BSI approved 8-pin SOP
PS2707-4 16-pin SOP
366 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
High Collector to Emitter Voltage Type (1/2)
PS2532-1 High isolation voltage 5 k 80 300 150 1500 to 6500 100, 100 4-pin DIP
High VCEO (300 V) (RL = 100 Ω)
Darlington Tr.
PS2532-2 UL, VDE, (Option), BSI, 8-pin DIP
SEMKO, FIMKO,
NEMKO, DEMKO
PS2532-4 approved 16-pin DIP
PS2533-1 High isolation voltage 350 4-pin DIP
High VCEO (350 V)
Darlington Tr.
PS2533-2 UL, VDE (Option), BSI, 8-pin DIP
SEMKO, FIMKO, NEMKO,
DEMKO approved
PS2533-4 16-pin DIP
PS2633 High isolation voltage 300 1000 to 15000 6-pin DIP
High VCEO (300 V)
High CTR
PS2634 Darlington Tr. 6-pin DIP
UL approved
PS2732-1 High isolation voltage 2.5 k 50 300 150 1500 or above 100, 100 4-pin SOP
Darlington Tr. (RL = 100 Ω)
High VCEO (300 V)
PS2732-2 UL, VDE (Option), 8-pin SOP
BSI approved
PS2732-4 16-pin SOP
PS2733-1 High isolation voltage 350 4-pin SOP
Darlington Tr.
High VCEO (350 V)
PS2733-2 UL, VDE (Option), 8-pin SOP
BSI approved
PS2733-4 16-pin SOP
Selection Guide X10679EJHV0SG00 367
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
High Collector to Emitter Voltage Type (2/2)
PS2832-1 Pin pitch: 1.27 mm 2.5 k 50 300 120 400 or above 100, 100 4-pin
Darlington Tr. (RL = 100 Ω) Small SOP
High VCEO (300 V)
UL approved
PS2832-4 Pin pitch: 1.27 mm 16-pin
Darlington Tr. Small SOP
High VCEO (300 V)
UL, BSI approved
368 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Tr. Output Type
Large Input Current Type (DC Input, Single Tr.)
PS2521-1 High isolation voltage 5 k 150 80 50 20 to 80 3, 5 4-pin DIP
Large input current (RL = 100 Ω)
UL approved
PS2521-2 8-pin DIP
PS2521-4 16-pin DIP
PS2621 High isolation voltage 20 to 50 6-pin DIP
Large input current
UL approved
PS2622 6-pin DIP
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCEO ICCTR tr, tf
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) TYP.
Large Input Current Type (AC Input, Single Tr.)
PS2525-1 High isolation voltage 5 k ±150 80 50 20 to 80 3, 5 4-pin DIP
Large input current (RL = 100 Ω)
AC input
PS2525-2 UL approved 8-pin DIP
PS2525-4 16-pin DIP
PS2625 High isolation voltage 20 to 50 6-pin DIP
Large input current
AC input
PS2626 UL approved 6-pin DIP
Selection Guide X10679EJHV0SG00 369
Optical Device
Photocoupler
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCC IOCTR tPHL tPLH
(Vr.m.s.) (mA) (V) (mA) (%) (
µ
s) MAX. (
µ
s) MAX.
IC Output Type
High-Speed Type 1Mbps (Analog Output)
PS8601 8-pin base 5 k 25 35 8 15 or 0.8 0.8 8-pin DIP
connection above (RL = 1.9 kΩ)(RL = 1.9 kΩ)
UL, VDE (Option),
BSI approved
PS8602 8 pins 8-pin DIP
High CMR (2 kV/
µ
s)
UL, VDE (Option),
BSI approved
PS8701 5 pins 2.5 k 25 35 8 15 to 35 0.8 1.2 5-pin SOP
High CMR (10 kV/
µ
s) (RL = 2.2 kΩ)(RL = 2.2 kΩ)
UL, VDE (Option)
approved
High-Speed Type 10Mbps (Digital Output)
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCC IOIFLH tPLH, tPHL
(Vr.m.s.) (mA) (V) (mA) (mA) MAX. (ns) MAX.
PS9601 Ultra high-speed type 5 k 30 7 50 5.0 75 8-pin DIP
UL approved
PS9701 Ultra high-speed type 2.5 k 30 7 50 5.0 75 5-pin SOP
UL, VDE (option) approved
PS9611 Ultra high-speed type 5 k 30 7 13 6.0 75 8-pin DIP
High CMR (10 kV/
µ
s TYP.)
PS9711 2.5 k 30 7 13 6.0 75 5-pin SOP
: Under development
High-Power Type (Inverter)
Part Features Absolute Maximum Ratings Electrical Characteristics Packages
Number BV IFVCC IO1/IO2 CMH, CMLtPLH, tPHL
(Vr.m.s.) (mA) (V) (A) (kV/
µ
s) (
µ
s) MAX.
PS9634 Inverter circuit 5 k 30 18 0.5/ 1.0 5.0 8-pin DIP
UL approved 0.8
370 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
Safety Standards Approval List (Made in Japan, as of January 1999) (1/2)
Safety Standards
UL VDE CSA BSI SEMKO FIMKO NEMKO DEMKO
Part Number UL1577 VDE0884 CL EN 60065 EN 60065 EN 60065 EN 60065 EN 60065
E72422(S)
9073 × 0030,
/IEC 65, /IEC 60065, /IEC 65, /IEC 65, /IEC 60665,
Single Double CA EN 60950 EN 60950 EN 60950 EN 60950 EN 60950
protection protection 101391 /IEC 950 /IEC 60950 /IEC 950 /IEC 950 /IEC 950
PS2501-1, -2, -4
PS2502-1, -2, -4
PS2503-1, -2, -4
PS2505-1, -2, -4
PS2506-1, -2, -4
PS2511-1, -2, -4
PS2521-1, -2, -4
PS2525-1, -2, -4
PS2532-1, -2, -4
PS2533-1, -2, -4
PS2561-1, -2
PS2562-1, -2
PS2565-1, -2
PS2566-1, -2
PS2571-1, -4
PS2581L1, L2
PS2601
PS2602
PS2603
PS2604
PS2605
PS2606
PS2607
PS2608
PS2621
PS2622
PS2625
PS2626
Remark : Approved : Awaiting approval
Selection Guide X10679EJHV0SG00 371
Optical Device
Photocoupler
Safety Standards Approval List (Made in Japan, as of January 1999) (2/2)
Safety Standards
UL VDE CSA BSI SEMKO FIMKO NEMKO DEMKO
Part Number UL1577 VDE0884 CL EN 60065 EN 60065 EN 60065 EN 60065 EN 60065
E72422(S)
9073 × 0030,
/IEC 65, /IEC 60065, /IEC 65, /IEC 65, /IEC 60665,
Single Double CA EN 60950 EN 60950 EN 60950 EN 60950 EN 60950
protection protection 101391 /IEC 950 /IEC 60950 /IEC 950 /IEC 950 /IEC 950
PS2633
PS2634
PS2651
PS2652
PS2653
PS2654
PS2701-1, -2, -4
PS2702-1, -2, -4
PS2703-1, -2, -4
PS2705-1, -2, -4
PS2706-1, -2, -4
PS2707-1, -2, -4
PS2732-1, -2, -4
PS2733-1, -2, -4
PS2801-1
PS2802-1
PS2805-1
PS2806-1
PS2801-4
PS2802-4
PS2805-4
PS2806-4
PS2832-1
PS2832-4
PS8601
PS8602
PS8701
PS9601
PS9634
PS9701
Remark : Approved
372 Selection Guide X10679EJHV0SG00
Optical Device
Photocoupler
Safety Standards Approval List (Made in Taiwan, as of January 1999)
Safety Standards
UL VDE CSA BSI SEMKO FIMKO NEMKO DEMKO
Part Number UL1577 VDE0884 CL EN 60065 EN 60065 EN 60065 EN 60065 EN 60065
E72422(S)
9073 × 0030,
/IEC 65, /IEC 60065, /IEC 65, /IEC 65, /IEC 60665,
Single Double CA EN 60950 EN 60950 EN 60950 EN 60950 EN 60950
protection protection 101391 /IEC 950 /IEC 60950 /IEC 950 /IEC 950 /IEC 950
PS2501-1, -2, -4
PS2502-1, -2, -4
PS2503-1, -2, -4
PS2505-1, -2, -4
PS2506-1, -2, -4
PS2521-1, -2, -4
PS2525-1, -2, -4
PS2532-1, -2, -4
PS2533-1, -2, -4
PS2561-1, -2
PS2562-1, -2
PS2565-1, -2
PS2566-1, -2
Remark : Approved
Selection Guide X10679EJHV0SG00 373
Optical Device
OCMOS FET Product Map
• Continuous Load Current vs. Break Down Voltage
Break Down V oltage V
L
(V)
Continuous Load Current I
L
(mA)
100 200 300 400 500 6000
100
200
300
400
500
PS7200A PS7111
PS7211
PS7112
PS7212
PS7113
PS7122
PS7522 PS7122A
-1A /2A /1B /2B /1C
PS7141-1A /2A /1B /2B /1C
PS7341
PS7142 -1A /2A /1B /2B /1C
PS7342
PS7160 -1A /2A
PS7360
PS7141C
PS7241-1A /2A /1B /2B /1C /ATx
PS7241C-1A /ATx
PS7341C
PS7841
PS7200B
:DIP Type
:SOP Type
PS7342C
:Under Development
PS7221
• On-state Resistance vs. Break Down Voltage
Break Down V oltage V
L
(V)
On-state Resistance (TYP.) R
on
(Ω)
1000 200 300 400 500 600
0.1
1.0
10
100
PS7211
PS7111
PS7112
PS7212
PS7113
PS7122
PS7522
PS7122A
-1A /2A /1B /2B /1C
PS7160 -1A /2A
PS7360
PS7200B
PS7200A
PS7141-1A /2A /1B /2B /1C
PS7141C
PS7241-1A /2A /1B /2B /1C /ATx
PS7241C-1A /ATx
PS7341
PS7341C
PS7221
:DIP Type
:SOP Type
PS7342C
PS7841
:Under Development
PS7142 -1A /2A /1B /2B /1C
PS7342
OCMOS FETTM (Opto-Coupled MOS FET Relay)
374 Selection Guide X10679EJHV0SG00
Optical Device
OCMOS FET (Opto-Coupled MOS FET Relay)
Standard Type
Part Features Output Absolute Maximum Ratings Electrical Characteristics Packages
Number Type VLILBV TATstg Diode
MOSFET
Coupled
(V) (mA) (Vr.m.s.) (°C) (°C) VFIRILoff Ron ton toff
(V) (
µ
A) (
µ
A) (Ω) (ms) (ms)
MAX. MAX. MAX. TYP. MAX. MAX.
PS7111-2A Standard DIP, 2a 100 100 1.5 k –40 to –40 to 1.4 5 1 3.0 0.4 0.2 8-pin DIP
PS7112-1A Normally open 1a 100 200 +80 +100 3.0 0.4 0.2 6-pin DIP
PS7113-1A 1a 100 350 0.9 3.0 0.2 6-pin DIP
PS7113-2A 2a 100 350 0.9 3.0 0.2 8-pin DIP
PS7122-1A 1a 200 200 3.0 2.0 0.2 6-pin DIP
PS7122-2A 2a 200 200 3.0 2.0 0.2 8-pin DIP
PS7122A-1A 1a 250 200 4.5 1.5 0.2 6-pin DIP
PS7122A-2A 2a 250 200 4.5 1.5 0.2 8-pin DIP
PS7141-1A 1a 400 150 20.0 1.0 0.2 6-pin DIP
PS7141-2A 2a 400 150 20.0 1.0 0.2 8-pin DIP
PS7142-1A 1a 400 200 6.0 5.0 0.2 6-pin DIP
PS7142-2A 2a 400 200 7.5 2.0 0.2 8-pin DIP
PS7160-1A 1a 600 90 42.0 1.5 0.2 6-pin DIP
PS7160-2A 2a 600 90 42.0 1.5 0.2 8-pin DIP
PS7211-2A Standard SOP, 2a 100 100 1.5 k –40 to –40 to 1.4 5 1 3.4 1.0 0.2 8-pin SOP
PS7212-1A Normally open 1a 100 200 +80 +100 3.0 1.0 0.2 4-pin SOP
PS7221-2A 2a 200 150 4.0 1.5 0.2 8-pin SOP
PS7241-1A 1a 400 120 18.0 2.0 0.2 4-pin SOP
PS7241-2A 2a 400 120 21.0 1.0 0.2 8-pin SOP
PS7200A-1A Low CxR type 1a 40 100 1.5 k –40 to –40 to 1.4 5 0.1 9.3 0.5 0.2 4-pin SOP
PS7200B-1A 1a 40 250 +80 +100 0.8 1.0 0.2 4-pin SOP
PS7122A-1B Standard, 1b 250 200 1.5 k –40 to –40 to 1.4 5 1 4.5 0.2 1.5 6-pin DIP
PS7122A-2B Normally close 2b 250 200 +80 +100 4.5 0.2 1.5 8-pin DIP
PS7141-1B 1b 400 150 24.0 0.2 1.0 6-pin DIP
PS7141-2B 2b 400 150 24.0 0.2 1.0 8-pin DIP
PS7142-1B 1b 400 200 7.0 0.2 5.0 6-pin DIP
PS7142-2B 2b 400 200 7.0 0.2 5.0 8-pin DIP
PS7241-1B 1b 400 120 24.0 0.2 2.0 4-pin SOP
PS7241-2B 2b 400 120 21.0 0.2 1.0 8-pin SOP
PS7122A-1C Standard, 1a+1b 250 200 1.5 k –40 to –40 to 1.4 5 1 4.5 1.5 0.2 8-pin DIP
Transfer +80 +100 (N.O.) (N.O.)
0.2 1.5
(N.C.) (N.C.)
PS7141-1C 1a+1b 400 150 20.0 1.0 0.2 8-pin DIP
(N.O.) (N.O.) (N.O.)
24.0 0.2 1.0
(N.C.) (N.C.) (N.C.)
PS7142-1C 1a+1b 400 200 8.0 2.0 0.2 8-pin DIP
(N.O.) (N.O.) (N.O.)
7.0 0.2 2.0
(N.C.) (N.C.) (N.C.)
PS7241-1C 1a+1b 400 120 21.0 1.0 0.2 8-pin SOP
(N.O.) (N.O.)
0.2 1.0
(N.C.) (N.C.)
: Under development
Selection Guide X10679EJHV0SG00 375
Optical Device
OCMOS FET (Opto-Coupled MOS FET Relay)
High Isolation Voltage Type
Part Features Output Absolute Maximum Ratings Electrical Characteristics Packages
Number Type VLILBV TATstg Diode
MOSFET
Coupled
(V) (mA) (Vr.m.s.) (°C) (°C) VFIRILoff Ron ton toff
(V) (
µ
A) (
µ
A) (Ω) (ms) (ms)
MAX. MAX. MAX. TYP. MAX. MAX.
PS7341-1A High isolation 1a 400 150 3.75 k –40 to –40 to 1.4 5 1 20.0 1.0 0.2 6-pin DIP
PS7342-1A voltage 400 200 +85 +125 6.0 2.5 0.2
PS7360-1A 600 90 41.0 2.0 0.2
Slow Speed Type
Part Features Output Absolute Maximum Ratings Electrical Characteristics Packages
Number Type VLILBV TATstg Diode
MOSFET
Coupled
(V) (mA) (Vr.m.s.) (°C) (°C) VFIRILoff Ron ton toff
(V) (
µ
A) (
µ
A) (Ω) (ms) (ms)
MAX. MAX. MAX. TYP. MAX. MAX.
PS7522-1A Slow speed 1a 200 200 1.5 k –40 to –40 to 1.4 5 1 3.0 12.0 6.5 6-pin DIP
+80 +100
PS7522-2A 2a 200 200 1.5 k –40 to –40 to 1.4 5 1 3.0 12.0 6.5 8-pin DIP
+80 +100
Hybrid (Multi Function) Type
Part Features BV OCMOS FET Photocoupler Diode Bridge Darlington Tr. Packages
Number (Vr.m.s.) (1a type)
VLILRon VCEO CTR VRVFVCEO IChFE
(V) (mA) (Ω) (V) (%) (V) (V) (V) (mA)
TYP. MAX. MAX.
PS7241-AT1∗1DC Input 1.5 k 400 120 20.0 40 50 –––––8-pin SOP
PS7241-AT5∗1AC Input to 400
PS7841-A15 , ∗2for DAA 400 120 16 40 50 100 1.2 40 120 10000 16-pin SOP
to 400 to Lead pitch:
30000 1.27 mm
: Under development
∗1: Solid state relays containing a GaAs LED on light emitting side (input side) and MOSFET’s (+Photo transistor) on output
side.
∗2: The PS7841-A15 is a solid state relay for optical DAA (Data Access Arrangement) containing a diode bridge, MOS FET,
photocoupler, Darlington transistor and LED.
376 Selection Guide X10679EJHV0SG00
Optical Device
OCMOS FET (Opto-Coupled MOS FET Relay)
Current Limit Type
• Standard Type
Part Output Absolute Maximum Ratings Electrical Characteristics Packages
Number Type VLILBV TATstg Diode MOSFET Coupled
(V) (mA) (Vr.m.s.) (°C) (°C) VFIRILoff Ron ton toff ILMT
(V) (
µ
A) (
µ
A) (Ω) (ms) (ms) (mA)
MAX. MAX. MAX. TYP. MAX. MAX.
PS7141C-2A 2a 400 120 1.5 k –40 to –40 to 1.4 5 1 26.0 1.0 1.0 170 to 8-pin DIP
+80 +100 250 mA/ch
PS7241C-1A 1a 400 120 1.5 k –40 to –40 to 1.4 5 1 28.0 2.0 0.2 125 to 4-pin SOP
+80 +100 180
• High Isolation Voltage Type
Part Output Absolute Maximum Ratings Electrical Characteristics Packages
Number Type VLILBV TATstg Diode MOSFET Coupled
(V) (mA) (Vr.m.s.) (°C) (°C) VFIRILoff Ron ton toff ILMT
(V) (
µ
A) (
µ
A) (Ω) (ms) (ms) (mA)
MAX. MAX. MAX. TYP. MAX. MAX.
PS7341C-1A 1a 400 120 3.75 k –40 to –40 to 1.4 5 1 27.0 1.0 1.0 125 to 250 6-pin DIP
PS7342C-1A 400 170 +85 +125 12.0 5.0 1.0 175 to 370
: Under development
: Under development
• Hybrid (Multi Function) Type
Part Features BV OCMOS FET Photocoupler Packages
Number (Vr.m.s.) (1a type)
VLILRon ILMT VCEO CTR
(V) (mA) (Ω) (mA) (V) (%)
TYP.
PS7241C-AT1∗DC Input 1.5 k 400 120 28.0 125 to 180 40 50 to 400 8-pin SOP
PS7241C-AT5∗AC Input
∗: Solid state relays containing a GaAs LED on light emitting side (input side) and MOSFET’s (+Photo transistor) on output side.
Selection Guide X10679EJHV0SG00 377
Optical Device
OCMOS FET (Opto-Coupled MOS FET Relay)
Safety Standards Approval List (as of January 1999)
Safety Standards
Part Number UL VDE BSI
UL1577 VDE0884 BS415 BS7002
PS7111-2A
PS7112-1A
PS7113-1A
PS7113-2A
PS7122-1A
PS7122-2A
PS7122A-1A
PS7122A-1B
PS7122A-1C
PS7122A-2A
PS7122A-2B
PS7141-1A
PS7141-1B
PS7141-1C
PS7141-2A
PS7141-2B
PS7141C-2A
PS7142-1A
PS7142-2A
PS7142-1B
PS7142-2B
PS7142-1C
PS7160-1A
PS7160-2A
PS7200A-1A
PS7200B-1A
PS7211-2A
PS7212-1A
PS7221-2A
PS7241-1A
PS7241-1B
PS7241-1C
PS7241-2A
PS7241-2B
PS7241-AT1
PS7241-AT5
PS7241C-1A
PS7241C-AT1
PS7241C-AT5
PS7341-1A
PS7341C-1A
PS7342-1A
PS7342C-1A
PS7360-1A
PS7522-1A
PS7522-2A
PS7841-A15
: Under development
Remark : Approved : Awaiting approval
378 Selection Guide X10679EJHV0SG00
Optical Device
Infrared Transceivers
Infrared Transceivers
Part IrDA Absolute Maximum Ratings Electro-Optical Characteristics Remarks
Number Ver. (TA = 25 °C) (TA = 25 °C)
TATstg VCC ILED IEH ICC Data Rate
(°C) (°C) (V) (mA) (mW/Sr) (A) (bps)
TYP. TYP. TYP.
NL1000 1.0 0 to +70 –25 to +85 3.3 150 80 150
µ
2.4 k to Standard: with
115.2 k Shield Case
NL1100 1.1 0 to +70 –25 to +85 5.0 300 160 4.0 m A Port: Option: Shield
2.4 k to 115.2 k Case
B Port:
0.576 M to 4.0 M
: Under development
Plastic Fiber Link
Plastic Fiber Link
Part Absolute Maximum Ratings (TC = 25 °C) Electro-Optical Characteristics (TC = 25 °C)
Number VCC (V) TC (°C) Transmission Speed Transmission Distance (m)
(Mbps) @ SI-POF @ SI-HPCF
NL2100 –0.5 to +7.0 0 to +70 1 to 156 50 100
NL2110 –0.5 to +7.0 0 to +70 1 to 250 50 100
Selection Guide X10679EJHV0SG00 379
Optical Device
Visible Lasers/Fiberoptic Devices
Visible Lasers/Fiberoptic Devices Product Map
600 700 800 900 1200 1300 1400 1500 1600
PULSED LD
DFB LD
Wavelength
(nm)
Family
Visible Wavelength Short Wavelength Long Wavelength
Laser
Diode
(LD)
Avalanche
Photo
Diode
(APD)
PIN
Photo
Diode
(PD)
Mark wavelength or operating range
:
F-P CW LD
PULSED LD
Modules are available with FC-PC or SC-PC connector.
F-P LD
DFB LD
1700
PULSED LD
NDL3325ST/SU
NDL7001
NDL7001L NDL7401P
NDL7401P1
NDL7401P2
NDL7408PL
NDL7408P1L
NDL7408P1K
NDL7408P2L
NDL7408PK
NDL7408P2K
NDL7103
NDL7113 NDL7502P
NDL7503P
NDL7503P1
NDL7510P
NDL7512P
NDL7513P
NDL7513P1
NDL7514P
NDL7514P1
NDL7515P
NDL7515P1
NDL7603P
NDL7603P1
NDL7603P2
NDL7620P
NDL7620P1
NDL7620P2
NDL7552P
NDL7553P
NDL7553P1
NDL7560P
NDL7562P
NDL7563P
NDL7563P1
NDL7564P
NDL7564P1
NDL7153
NDL7163
NDL7701P
NDL7701P1
NDL7701P2
NDL7705P
NDL7705P1
NDL7705P2
NX8562LB
NX8563LB
NDL7910P
NDL7565P
NDL7565P1
NDL5506P
NDL5506PS
NDL5516P
NDL5521P
NDL5521P2
NDL5521P1
NDL5522P
NDL5551P
NDL5551P1
NDL5551P2
NDL5520C
NDL5530
NDL5530C
NDL5590P
NDL5421P
NDL5421P1
NDL5461P
NDL5421P2
NDL5422P
NDL5461P2
NDL5461P1
NDL5590P1
NDL5590P2
NDL5481P
NDL5481P1
NDL5481P2
NDL5531P1
NDL5531P
NDL5531P2
NDL5592P
NDL5592P1
NDL5592P2
NDL7540PA
NDL7580P
: Under development
NX8501
Optical Device
380 Selection Guide X10679EJHV0SG00
Visible Lasers
Visible Lasers
Part Peak Absolute Maximum Ratings Electro-Optical Characteristics Applications
Number Wavelength (TC = 25 °C) (TC = 25 °C)
λp (nm) PoTCTstg Ith Iop Poθ⊥θ//
(mW) (°C) (°C) (mA) (mA) (mW) (deg.) (deg.)
NDL3325ST/SU 650 8 –20 to +80 –40 to +85 30 40 5 30 8 for DVD
: Under development
Fiberoptic Devices
Lasers (Digital)
• Digital Optical Fiber Communications FP-LD
Part Number Absolute Maximum Ratings Electro-Optical Characteristics (TC = 25 °C) Package
IFTCTstg Ith Iop Po/PfλCσ∗tr/tf
(mA) (°C) (°C) (mA) (mA) (mW) (nm) (nm) (ns)
TYP. TYP. MIN. TYP. TYP. MAX.
NDL7001 – –40 to +85 –55 to +125 10 Ith+12 5 1310 1.0 0.5/0.5 CAN
NDL7001L – –40 to +85 –55 to +125 10 Ith+15 5 1310 1.0 0.5/0.5 CAN with lens
NDL7401P Series Ith+50 –40 to +85 –40 to +85 10 Ith+15 2.0 1310 1.3 0.5/0.5 Coaxial
NDL7408PL Series Ith+50 –40 to +85 –40 to +85 10 Ith+15 0.2 1310 1.3 0.5/0.5 Coaxial
NDL7408PK Series Ith+50 –40 to +85 –40 to +85 10 Ith+20 1.0 1310 1.3 0.5/0.5 Coaxial
∗: RMS (–20 dB)
• Digital Optical Fiber Communications DFB-LD
Part Number Absolute Maximum Ratings Electro-Optical Characteristics (TC = 25 °C) Package
IFTCTstg Ith Po/Pfλptr/tf
(mA) (°C) (°C) (mA) (mW) (nm) (ns)
TYP. MIN. TYP. MAX.
NDL7603P Series 150 –40 to +85 –40 to +85 15 2 1310 0.5/0.5 Coaxial
NDL7620P Series 150 0 to +70 –40 to +85 45∗12 1310 0.04/0.1∗2Coaxial
NX8501 Series 200 0 to +65 –40 to +85 20 2 1510 0.5/0.5 Coaxial
NDL7701P Series 150 –20 to +85 –40 to +85 15 2 1550 0.5/0.5 Coaxial
NDL7705P Series Ith+50 –40 to +85 –40 to +85 15 2 1550 0.5/0.5 Coaxial
NX8562LB 300 –20 to +65 –40 to +85 20 20 1550∗3– Butterfly
NX8563LB Series 300 –20 to +65 –40 to +85 20 10 ITU-T∗4– Butterfly
NDL7910P 150 –20 to +70 –40 to +85 7 0.5 1550∗30.125/0.125 Butterfly
(EA Modulator
integrated type)
∗1: MAX.
∗2: TYP.
∗3: Wavelength selectable for ITU-T standards upon request.
∗4: Wavelength selectable for ITU-T standards.
Optical Device
Selection Guide X10679EJHV0SG00 381
Fiberoptic Devices
Pump Laser
• EDFA Pumping Applications FP-LD
Part Number Absolute Maximum Ratings Electro-Optical Characteristics (TC = 25 °C) Package
IFTCTstg Ith Iop PfλCσ∗tr/tf
(mA) (°C) (°C) (mA) (mA) (mW) (nm) (nm) (ns)
TYP. TYP. TYP. TYP. MAX. MAX.
NDL7540PA 600 –20 to +65 –40 to +85 40 500 110 1480 8 – Butterfly
∗: RMS (–20 dB)
Pulsed Lasers for OTDR
• OTDR Applications FP-LD
Part Number Absolute Maximum Ratings Electro-Optical Characteristics (TC = 25 °C) Package
IF∗1TCTstg Ith Iop∗1Po/Pf∗1λC∗1σ∗2tr/tf
(mA) (°C) (°C) (mA) (mA) (mW) (nm) (nm) (ns)
TYP. TYP. TYP. TYP. MAX. MAX.
NDL7103 1200 –40 to +70 –55 to +125 35 1000 320 1310 7 2/2 CAN
NDL7113 600 –40 to +70 –55 to +125 20 400 175 1310 10 1/1 CAN
NDL7153 1200 –40 to +70 –55 to +125 45 1000 240 1550 8 2/2 CAN
NDL7163 600 –40 to +70 –55 to +125 30 400 120 1550 10 1/1 CAN
NDL7502P 1200 –20 to +65 –40 to +70 35 1000 190 1310 10 2/2 DIP
NDL7503P Series 1200 –20 to +60 –40 to +85 35 1000 180 1310 10 2/2 Coaxial
NDL7510P 600 –20 to +65 –40 to +70 20 400 55 1310 10 1/1 DIP
NDL7512P 600 –20 to +65 –40 to +70 20 400 110 1310 10 1/1 DIP
NDL7513P Series 600 –20 to +60 –40 to +85 20 400 110 1310 10 1/1 Coaxial
NDL7514P Series 600 –20 to +60 –40 to +85 20 400 50 1310 10 1/1 Coaxial
NDL7515P Series 600 –20 to +60 –40 to +85 20 400 30 1310 10 1/1 Coaxial
NDL7552P 1200 –20 to +65 –40 to +70 40 1000 125 1550 10 2/2 DIP
NDL7553P Series 1200 –20 to +60 –40 to +85 45 1000 145 1550 10 2/2 Coaxial
NDL7560P 600 –20 to +65 –40 to +70 20 400 30 1550 10 1/1 DIP
NDL7562P 600 –20 to +65 –40 to +70 40 400 80 1550 10 1/1 DIP
NDL7563P Series 600 –20 to +60 –40 to +85 45 400 80 1550 10 1/1 Coaxial
NDL7564P Series 600 –20 to +60 –40 to +85 40 400 40 1550 10 1/1 Coaxial
NDL7565P Series 600 –20 to +60 –40 to +85 20 400 11 1550 10 1/1 Coaxial
NDL7580P 1200 –20 to +65 –40 to +70 30 1000 100∗31625 15 2/2 DIP
∗1: Pulse drive: Pulse width = 10
µ
s, duty = 1 % (Coaxial, DIP)
Pulse width = 1
µ
s, duty = 1 % (CAN)
∗2: RMS (–20 dB)
∗3: MIN.
Optical Device
382 Selection Guide X10679EJHV0SG00
Fiberoptic Devices
Detectors
• InGaAs PIN-PD
Part Number Absolute Maximum Ratings Electro-Optical Characteristics (TC = 25 °C) Package
Pin TCTstg Detecting ID (nA) Ct (pF) S (A/W) fC
(mW) (°C) (°C) area size VR TYP. VR TYP. λTYP. (GHz)
(
µ
m) (V) (V) (nm) MIN.
NDL5421P Series 8 –40 to +85 –40 to +85
φ
50 5 0.1 5 0.7 1300 0.89 2.5 Coaxial
1550 0.94
NDL5422P – –40 to +70 –40 to +85
φ
50 5 0.1 – – 1300 0.89 2.5 Butterfly
1550 1.00 with AMP
NDL5461P Series 8 –40 to +85 –40 to +85
φ
80 5 0.1 5 1.0 1300 0.89 2.5 Coaxial
1550 0.94
NDL5481P Series 8 –40 to +85 –40 to +85
φ
80 10 0.1 10 0.7 1300 0.85 2.5 Coaxial
• InGaAs APD
Part Number Absolute Maximum Ratings Electro-Optical Characteristics (TC = 25 °C) Package
IRTCTstg Detecting V(BR)R IDS (A/W) fC
(mA) (°C) (°C) area size (V) (nA)∗λTYP. (GHz)
(
µ
m) TYP. TYP. (nm) MIN.
NDL5506P Series 0.5 –20 to +55 –40 to +85
φ
50 70 2 1300 0.89 1.0 DIP with internal
1550 1.00 cooler
NDL5516P 0.5 –20 to +55 –40 to +85
φ
80 75 2 1300 0.89 0.7 DIP with internal
1550 1.00 cooler
NDL5520C 0.5 –40 to +70 –55 to +100
φ
50 70 5 1300 0.89 2.5 Chip on carrier
1550 1.00
NDL5521P Series 0.5 –40 to +85 –40 to +85
φ
50 55 5 1300 0.94 2.5 Coaxial
1550 0.96
NDL5522P 0.5 –40 to +70 –40 to +85
φ
50 55 5 1310 0.89 2.5 Butterfly with AMP
1550 1.00
NDL5530 0.5 –40 to +85 –55 to +100
φ
30 70 5 1300 0.94 2.5 CAN
1550 0.96
NDL5530C 0.5 –40 to +85 –55 to +100
φ
30 70 5 1300 0.94 2.5 Chip on carrier
1550 0.96
NDL5531P Series 0.5 –40 to +85 –40 to +85
φ
30 70 5 1300 0.94 2.5 Coaxial
1550 0.96
NDL5551P Series 0.5 –40 to +85 –40 to +85
φ
50 70 5 1300 0.94 1.0 Coaxial
1550 0.96
NDL5590P Series 0.5 –40 to +85 –40 to +85
φ
50 70 5 1310 0.94 1.0 Coaxial with AMP
1550 0.96
NDL5592P Series 0.5 –40 to +85 –40 to +85
φ
30 70 5 1310 0.94 2.5 Coaxial with AMP
1550 0.96
∗: Conditions: V(BR)R × 0.9
Selection Guide X10679EJHV0SG00 383
INDEX
9
Part number Page Part number PagePart number PagePart number Page Part number Page
384 Selection Guide X10679EJHV0SG00
Quick Reference Table by Part Number
[ Numerals ]
03P2J 321
03P2M 321
03P4J 321
03P4M 321
03P4MF 321
03P4MG 321
03P5J 321
03P5MG 321
03P6MG 321
2P4M 321
2P5M 321
2P6M 321
2S2M 321
2S4M 321
2SA1008 280,289
2SA1009 280,289
2SA1009A 280,289
2SA1010 280,289
2SA1069 280,289
2SA1069A 280
2SA1129 280,290
2SA1156 279,289
2SA1173 284
2SA1174 286
2SA1175 277,286
2SA1206 276,287
2SA1221 278
2SA1222 278
2SA1226 283
2SA1247 283,286
2SA1261 280
2SA1330 283,286
2SA1376 276,286
2SA1376A 276
2SA1385 279,288
2SA1385-Z 285
2SA1394 281,289
2SA1395 281,289
2SA1396 281,289
2SA1400 279,289
2SA1400-Z 285
2SA1412 279
2SA1412-Z 285
2SA1413 279,289
2SA1413-Z 285
2SA1441 281,288
2SA1442 281,288
2SA1443 281,288
2SA1444 281,288
2SA1458 277,287
2SA1459 277,287
2SA1460 278,287,289
2SA1461 283,287
2SA1462 283,287
2SA1463 284,287
2SA1464 283,287
2SA1486 279,289
2SA1544 276
2SA1546 279,290
2SA1608 285,287
2SA1610 285,287
2SA1611 285,286
2SA1612 285,286
2SA1615 279,288
2SA1615-Z 285
2SA1625 276
2SA1626 278
2SA1627 278
2SA1645 280,288
2SA1646 280
2SA1647 279,288
2SA1648 279,288
2SA1649 279,288
2SA1650 281,288
2SA1652 281,288
2SA1720 281,291
2SA1741 281,288
2SA1742 281,288
2SA1743 281,288
2SA1744 281,288
2SA1836 285
2SA1840 282,291
2SA1841 282,291
2SA1843 282,288
2SA1845 282,288
2SA1847 282,288
2SA1871 284
2SA1897 278,288
2SA675 276
2SA733 276,286
2SA811A 283,286
2SA812 283,286
2SA915 278
2SA916 278
2SA952 276,286
2SA953 276,286
2SA954 276,286
2SA988 276,286
2SA990 276
2SA992 276,286
2SB1068 276,286
2SB1093 278,291
2SB1094 281,290
2SB1097 281,290
2SB1098 281,291
2SB1099 281,291
2SB1100 281,291
2SB1114 284,286
2SB1115 284,286
2SB1115A 284,286
2SB1116 276,286
2SB1116A 276,286
2SB1117 278,288
2SB1149 279,291
2SB1150 279,291
2SB1151 279,288
2SB1217 279,288
2SB1261 279,288
2SB1261-Z 285
2SB1300 276
2SB1318 278
2SB1430 281,291
2SB1431 281,291
2SB1432 281,291
2SB1453 281
2SB1475 285
2SB1571 284
2SB1572 284
2SB1578 284,288
2SB1581 288
2SB1628 284
2SB546A 280,290
2SB564 278,286
2SB601 280,291
2SB605 278,286
2SB624 283,286
2SB707 280,290
2SB708 280,290
2SB733 278
2SB734 278
2SB736 283,286
2SB736A 283,286
2SB768 279,285,290
2SB772 279,288
2SB794 279,291
2SB795 279,291
2SB798 284,286
2SB799 284,286
2SB800 284,286
2SB804 284
2SB805 284
2SB806 284
2SB810 277,286
2SB811 286
2SB897 282,291
2SB962 279,288
2SB962-Z 285
2SB963 279,291
2SB963-Z 285
2SB984 278
2SC1009A 283,286
2SC1505 280,290
2SC1621 283
2SC1622A 283,286
2SC1623 283,286
2SC1653 283,286
2SC1654 283,286
2SC1674 276,286
2SC1841 276,286
2SC1842 276
2SC1843 276
2SC1845 276,286
2SC1927 336
2SC1940 278,286
2SC1941 278,286
2SC2001 276,286
2SC2002 276,286
2SC2003 276,286
2SC2148 336
2SC2149 336
2SC2223 283,286
2SC2331 280,289
2SC2333 280,289
2SC2334 280,289
2SC2335 280
2SC2351 336
2SC2517 280,289
2SC2518 280,289
2SC2586 343
2SC2688 279,290
2SC2690 279,290
2SC2690A 279,290
2SC2721 278
2SC2749 282,289
2SC2750 282,289
2SC2751 282,289
2SC2752 279,289
2SC2762 343
2SC2780 284,286
2SC2784 277,286
2SC2785 277,286
2SC2786 277,286
2SC2787 277,286
2SC2802 290
2SC2885 279,289
2SC2901 276,287
2SC2908 282
2SC2946 279,289
2SC2946(1) 285,289
2SC2954 336
2SC2958 278
2SC2959 278
2SC3115 283,286
2SC3157 280
2SC3158 280,289
2SC3159 280,289
2SC3209 278,286
2SC3218-M 343
2SC3286-M 343
2SC3355 336
2SC3356 336
2SC3357 336
2SC3360 283,286
2SC3478 276,286
2SC3478A 276
2SC3518 279,288
2SC3518-Z 285
2SC3545 336
2SC3554 284,286
2SC3567 281,289
2SC3568 281,289
2SC3569 281,289
2SC3570 281,289
2SC3571 281,289
2SC3572 281,289
2SC3582 336
2SC3583 336
2SC3585 336
2SC3587 336
2SC3588 279,289
2SC3588-Z 285
2SC3603 336
2SC3604 336
2SC3615 276,286
2SC3616 276,286
2SC3617 284,286
2SC3618 284,286
2SC3622 276,286
2SC3622A 276,286
2SC3623 277,286
2SC3623A 277,286
2SC3624 283,286
2SC3624A 283,286
2SC3631 279,289
2SC3631-Z 285
2SC3632 279,289
2SC3632-Z 285
2SC3663 336
2SC3691 281,288
2SC3692 281,288
2SC3693 281,288
2SC3694 281,288
2SC3731 277,287
2SC3732 277,287
2SC3733 278,287,289
2SC3734 283,287
2SC3735 283,287
2SC3736 284,287
2SC3739 283,287
2SC3809 336
2SC3810 336
2SC3817 342
2SC3840 279,289
2SC3841 336
2SC4000 278,290
2SC4001 279,290
2SC4062 281,288
2SC4063 281,288
2SC4092 336
2SC4093 336
2SC4094 336
2SC4095 336
2SC4173 285,287
2SC4175 285
2SC4176 285,287
2SC4177 285,286
2SC4178 285,286
2SC4179 285,286
2SC4180 285
2SC4181 285,286
2SC4182 336
2SC4183 336
2SC4184 336
2SC4185 336
2SC4186 336
2SC4187 336
2SC4225 336
2SC4226 336
2SC4227 336
2SC4228 336
2SC4305 280
2SC4331 279,288
2SC4336 281,288
2SC4342 279,291
2SC4346 279,289
2SC4350 280
2SC4351 281,291
2SC4536 336
2SC4549 281,288
2SC4550 281,288
2SC4551 281,288
2SC4552 281,288
2SC4553 281,288
2SC4554 281,288
2SC4568 336
2SC4569 336
2SC4570 336
2SC4571 336
2SC4703 336
2SC4783 285
2SC4810 282,291
2SC4811 282,291
2SC4813 282,288
2SC4814 282,288
2SC4815 282,288
2SC4885 336
2SC4942 284
2SC4954 336
2SC4955 336
Part number Page Part number PagePart number PagePart number Page Part number Page
Quick Reference Table by Part Number
Selection Guide X10679EJHV0SG00 385
2SC4956 336
2SC4957 336
2SC4958 336
2SC4959 336
2SC5004 336
2SC5005 336
2SC5006 336
2SC5007 336
2SC5008 336
2SC5009 336
2SC5010 336
2SC5011 337
2SC5012 337
2SC5013 337
2SC5014 337
2SC5015 337
2SC5177 337
2SC5178 337
2SC5179 337
2SC5180 337
2SC5181 337
2SC5182 337
2SC5183 337
2SC5184 337
2SC5185 337
2SC5186 337
2SC5191 337
2SC5192 337
2SC5193 337
2SC5194 337
2SC5195 337
2SC5288 341
2SC5289 341
2SC5336 337
2SC5337 337
2SC5338 337
2SC5369 337
2SC5408 337
2SC5409 337
2SC5431 337
2SC5432 337
2SC5433 337
2SC5434 337
2SC5435 337
2SC5436 337
2SC5437 337
2SC5454 337
2SC5455 337
2SC5507 337
2SC5508 337
2SC5509 337
2SC945 276,286
2SD1000 284,286
2SD1001 284,286
2SD1005 284
2SD1006 284
2SD1007 284
2SD1020 277,286
2SD1033 279,285,290
2SD1164 279,291
2SD1164-Z 285
2SD1210 282,291
2SD1286 279,291
2SD1286-Z 285
2SD1296 282,291
2SD1297 291
2SD1308 280,291
2SD1309 280,291
2SD1312 278
2SD1392 280,291
2SD1513 276,286
2SD1579 278,291
2SD1581 278,286,288
2SD1582 278,288
2SD1583 279,288
2SD1583-Z 285
2SD1584 279,288
2SD1584-Z 285
2SD1585 281,290
2SD1588 281,290
2SD1589 281,291
2SD1590 281,291
2SD1591 281,291
2SD1592 281,291
2SD1593 281,288
2SD1594 281,288
2SD1614 284,286
2SD1615 284,286
2SD1615A 284,286
2SD1616 276,286
2SD1616A 276,286
2SD1630 279,291
2SD1691 279,288
2SD1692 279,291
2SD1693 279,291
2SD1694 279,288
2SD1695 279,291
2SD1697 278,286,291
2SD1698 276,286
2SD1699 284,286
2SD1700 278,286,291
2SD1701 276,286
2SD1702 284,286
2SD1779 278
2SD1780 278
2SD1818 279,288
2SD1843 278,291
2SD1899 279,288
2SD1899-Z 285
2SD1950 284,286
2SD2161 281,291
2SD2162 281,291
2SD2163 281,291
2SD2164 281,288
2SD2165 281,288
2SD2228 285
2SD2383 283
2SD2402 284
2SD2403 284
2SD2425 284,288
2SD2463 278,291
2SD401A 280,290
2SD414 290
2SD415 279,290
2SD471 278,286
2SD560 280,291
2SD571 278,286
2SD596 283,286
2SD773 278
2SD774 278
2SD780 283,286
2SD780A 283,286
2SD794 279,290
2SD794A 279,290
2SD882 279,288
2SD985 279,291
2SD986 279,291
2SD992 279
2SD999 284,286
2SJ165 294
2SJ166 294
2SJ178 294
2SJ179 294
2SJ180 294
2SJ184 294
2SJ185 294
2SJ196 294
2SJ197 294
2SJ198 294
2SJ199 294
2SJ202 294
2SJ203 294
2SJ204 294
2SJ205 294
2SJ206 294
2SJ207 294
2SJ208 294
2SJ209 294
2SJ210 294
2SJ211 294
2SJ212 294
2SJ213 294
2SJ243 294
2SJ302 298
2SJ303 298
2SJ324 298
2SJ325 298
2SJ326 298
2SJ327 298
2SJ328 298
2SJ329 298
2SJ330 298
2SJ331 298
2SJ353 294
2SJ355 294
2SJ356 294
2SJ357 294
2SJ358 294
2SJ411 294
2SJ448 304
2SJ449 304
2SJ460 294
2SJ461 294
2SJ462 294
2SJ463A 294
2SJ492 298
2SJ493 298
2SJ494 298
2SJ495 298
2SK1122 299
2SK1123 299
2SK1132 292
2SK1133 292
2SK1271 305
2SK1272 292
2SK1273 292
2SK1274 292
2SK1282 299
2SK1283 299
2SK1284 299
2SK1285 299
2SK1286 299
2SK1287 299
2SK1288 299
2SK1289 299
2SK1290 299
2SK1292 299
2SK1293 299
2SK1294 299
2SK1295 299
2SK1398 292
2SK1399 292
2SK1482 292
2SK1483 292
2SK1484 292
2SK1485 292
2SK1491 305
2SK1492 305
2SK1493 305
2SK1494 305
2SK1495 305
2SK1496 305
2SK1497 305
2SK1498 305
2SK1499 305
2SK1500 305
2SK1501 305
2SK1502 305
2SK1580 292
2SK1581 292
2SK1582 292
2SK1583 292
2SK1584 292
2SK1585 292
2SK1586 292
2SK1587 292
2SK1588 292
2SK1589 292
2SK1590 292
2SK1591 292
2SK1592 292
2SK1593 292
2SK1594 299
2SK1596 299
2SK1656 292
2SK1657 292
2SK1658 292
2SK1748 299
2SK1749 299
2SK1750 305
2SK1751 305
2SK1752 305
2SK1753 305
2SK1756 305
2SK1757 305
2SK1758 305
2SK1760 305
2SK1784 305
2SK1785 305
2SK1793 305
2SK1794 305
2SK1795 305
2SK1796 305
2SK1824 292
2SK1850 299
2SK1851 299
2SK1852 299
2SK1853 299
2SK1953 303
2SK1954 303
2SK1958 292
2SK1959 292
2SK1960 292
2SK1988 305
2SK1989 305
2SK1990 305
2SK1991 305
2SK1992 305
2SK1993 305
2SK1994 305
2SK1995 305
2SK2040 303
2SK2053 293
2SK2054 293
2SK2055 293
2SK2070 293
2SK2090 293
2SK2109 293
2SK2110 293
2SK2111 293
2SK2112 293
2SK2131 299
2SK2132 303
2SK2133 303
2SK2134 303
2SK2135 303
2SK2136 303
2SK2137 303
2SK2138 303
2SK2139 303
2SK2140 303
2SK2141 303
2SK2157 293
2SK2158 293
2SK2159 293
2SK2234 305
2SK2275 305
2SK2341 303
2SK2353 303
2SK2354 303
2SK2355 303
2SK2356 303
2SK2357 303
2SK2358 303
2SK2359 303
2SK2360 303
2SK2361 303
2SK2362 303
2SK2363 303
2SK2364 303
2SK2365 303
2SK2366 303
2SK2367 303
2SK2368 303
2SK2369 303
2SK2370 303
2SK2371 303
2SK2372 303
2SK2409 298
2SK2410 298
Part number Page Part number PagePart number PagePart number Page Part number Page
386 Selection Guide X10679EJHV0SG00
Quick Reference Table by Part Number
2SK2411 298
2SK2412 298
2SK2413 298
2SK2414 298
2SK2415 298
2SK2461 298
2SK2462 298
2SK2476 303
2SK2477 303
2SK2478 303
2SK2479 303
2SK2480 303
2SK2481 303
2SK2482 304
2SK2483 304
2SK2484 304
2SK2485 304
2SK2486 304
2SK2487 304
2SK2488 304
2SK2498 297
2SK2499 297
2SK2510 297
2SK2511 297
2SK2512 297
2SK2513 297
2SK2514 297
2SK2515 297
2SK2541 293
2SK2597 343
2SK2723 297
2SK2724 297
2SK2826 297
2SK2857 293
2SK2858 293
2SK2941 297
2SK2981 297
2SK2982 297
2SK2983 297
2SK2984 297
2SK3053 297
2SK3055 297
2SK3056 297
2SK3057 297
2SK3058 297
2SK3059 297
2SK3060 297
2SK3061 297
2SK3062 297
2SK3108 302
2SK3109 302
2SK3110 302
2SK3111 302
2SK3112 302
2SK3113 302
2SK3114 302
2SK3115 302
2SK3116 302
2SK3221 302
2SK3294 302
2SK3297 302
2SK3298 302
2SK3299 302
2SK3300 302
2SK3304 302
2SK3305 302
2SK3306 302
2SK679A 292
2SK680A 292
2SK681A 292
2V5P4M 321
3P4J 321
3P4MH 321
3P5MH 321
3P6MH 321
3S4M 321
3SK131 335
3SK134B 335
3SK135A 335
3SK176A 335
3SK177 335
3SK206 335
3SK222 335
3SK223 335
3SK224 335
3SK230 335
3SK231 335
3SK252 335
3SK253 335
3SK254 335
3SK255 335
3SK299 335
5P4J 321
5P4M 321
5P4SM 321
5P5M 321
5P6J 321
5P6M 321
5P6SM 321
8P2M 321
8P2SM 321
8P4J 321
8P4M 321
8P4SM 321
[ A ]
AA1[ ] 276,309
AB1[ ] 276,310
AC01DGM 321
AC01DJM 321
AC03DGM 321
AC03DJM 321
AC03DJM-Z 321
AC03DSM 321
AC03EGM 321
AC03FGM 321
AC03FJM 321
AC03FJM-Z 321
AC03FSM 321
AC05DGM 321
AC05DJM 321
AC05DJM-Z 321
AC05DSM 321
AC05EGM 321
AC05ESM 321
AC05FGM 321
AC05FJM 321
AC05FJM-Z 321
AC05FSM 321
AC08DGM 321
AC08DSM 321
AC08EGM 321
AC08ESM 321
AC08FGM 321
AC08FSM 321
AC0V8DGM 321
AC10DGM 321
AC10DSM 321
AC10EGM 321
AC10ESM 321
AC10FGM 321
AC10FSM 321
AC12DGM 321
AC12DSM 321
AC12EGM 321
AC12ESM 321
AC12FGM 321
AC12FSM 321
AC16DGM 321
AC16DSM 321
AC16EGM 321
AC16FGM 321
AC16FSM 321
AD1[ ] 276,311
AD2[ ] 276,311
AN1[ ] 276,309
AP1[ ] 276,310
AQ1[ ] 276,310
AR1[ ] 276,311
[ B ]
BA1[ ] 277,309
BB1[ ] 277,310
BN1[ ] 277,309
BP1[ ] 277,310
[ C ]
CE1[ ] 278,311
CE2[ ] 278,311
[ F ]
FA1[ ] 283,312
FB1[ ] 283,312
FN1[ ] 283,312
FP1[ ] 283
[ G ]
GA1[ ] 285,312
GN1[ ] 285,312
[ H ]
HD1[ ] 284,313
HD2[ ] 284,313
HQ1[ ] 284,313
HR1[ ] 284,313
[ M ]
MC-22000 153
MC-22001 153
MC-22002 153
MC-22003 153
MC-22004 153
MC-22005 153
MC-22006 153
MC-22007 153
MC-22100 153
MC-22101 153
MC-22102 153
MC-22103 153
MC-22104 153
MC-22105 153
MC-22106 153
MC-22107 153
MC-4516CB64ES 144
MC-4516CC725 142
MC-4516CC726 142
MC-4516CD641ES 144
MC-4516CD645 142
MC-4516CD646 142
MC-4516CD64ES 144
MC-4516DA726 143
MC-4516DA727 143
MC-4532CC726 142
MC-4532CD646 142
MC-4532DA726 143
MC-4532DA727 143
MC-454CA726 142
MC-454CB641LS 144
MC-454CB645 142
MC-454CB646 142
MC-454CB64LS 144
MC-454DA726 143
MC-4564DC726 143
MC-458CA725 142
MC-458CA726 142
MC-458CB641ES 144
MC-458CB645 142
MC-458CB646 142
MC-458CB64LSA 144
MC-458CD641LS 144
MC-458CD64LS 144
MC-458DA726 143
MC-458DA727 143
MC-45V16AD641 145
MC-45V8AB641 145
MC-45V8AB641KS 145
MC-45V8AD641KS 145
MC-4R128BKD8J 145
MC-4R64BKD8J 145
MC-4RCNTYK 145
MC-7712 330
MC-7716 330
MC-7722 330
MC-7726 330
MC-7852 330
MC-7856 330
MC-7862 330
MC-7866 330
µ
PA101 330
µ
PA102 330
µ
PA103 330
µ
PA104 330
µ
PA1428A 315
µ
PA1434 315
µ
PA1436A 315
µ
PA1437 315
µ
PA1453 315
µ
PA1454 315
µ
PA1456 315
µ
PA1458 315
µ
PA1476 315
µ
PA1478 315
µ
PA1500B 316
µ
PA1501 316
µ
PA1520B 316
µ
PA1522 316
µ
PA1523B 316
µ
PA1524 316
µ
PA1526 316
µ
PA1527 316
µ
PA1550 316
µ
PA1552B 316
µ
PA1556A 316
µ
PA1560 316
µ
PA1572B 316
µ
PA1576 316
µ
PA1600 316
µ
PA1601 316
µ
PA1602 316
µ
PA1603 316
µ
PA1604 316
µ
PA1700 307
µ
PA1700A 307
µ
PA1701 307
µ
PA1701A 307
µ
PA1702 307
µ
PA1703 307
µ
PA1704 307
µ
PA1705 307
µ
PA1706 307
µ
PA1707 307
µ
PA1710 307
µ
PA1710A 307
µ
PA1711 307
µ
PA1712 307
µ
PA1713 307
µ
PA1714 307
µ
PA1715 307
µ
PA1716 307
µ
PA1750 307
µ
PA1751 307
µ
PA1752 307
µ
PA1753 307
µ
PA1754 307
µ
PA1755 307
µ
PA1756 307
µ
PA1757 307
µ
PA1758 307
µ
PA1759 307
µ
PA1790 307
µ
PA1800 308
µ
PA1801 308
µ
PA1802 308
µ
PA1803 308
µ
PA1810 308
µ
PA1811 308
µ
PA1812 308
µ
PA1813 308
µ
PA1814 308
µ
PA1815 308
µ
PA1850 308
µ
PA1851 308
µ
PA1852 308
µ
PA1853 308
µ
PA1854 308
µ
PA1855 308
µ
PA2001 315
µ
PA2002 315
µ
PA2003 315
µ
PA2004 315
Part number Page Part number PagePart number PagePart number Page Part number Page
Quick Reference Table by Part Number
Selection Guide X10679EJHV0SG00 387
µ
PA2981 315
µ
PA2982 315
µ
PA2987 315
µ
PA500 314
µ
PA501 314
µ
PA502 314
µ
PA503 314
µ
PA504 314
µ
PA505 314
µ
PA570 314
µ
PA571 314
µ
PA572 314
µ
PA573 314
µ
PA574 314
µ
PA600 314
µ
PA601 314
µ
PA602 314
µ
PA603 314
µ
PA604 314
µ
PA605 314
µ
PA606 314
µ
PA607 314
µ
PA608 314
µ
PA609 314
µ
PA610 314
µ
PA611 314
µ
PA670 314
µ
PA671 314
µ
PA672 314
µ
PA673 314
µ
PA674 314
µ
PA80 315
µ
PA800 338
µ
PA801 338
µ
PA802 338
µ
PA803 338
µ
PA804 338
µ
PA805 338
µ
PA806 338
µ
PA807 338
µ
PA808 338
µ
PA809 338
µ
PA81 315
µ
PA810 338
µ
PA811 338
µ
PA812 338
µ
PA813 338
µ
PA814 338
µ
PA821 338
µ
PA826 338
µ
PA827 338
µ
PA828 338
µ
PA831 338
µ
PA832 338
µ
PA833 338
µ
PA834 338
µ
PA835 338
µ
PA836 338
µ
PA840 338
µ
PB1005 251,327
µ
PB1502 325
µ
PB1504 325
µ
PB1505 325
µ
PB1506 325
µ
PB1507 325
µ
PB1508 325
µ
PB1509 325
µ
PB1510 325
µ
PC1060 273
µ
PC1093 272
µ
PC1094 273
µ
PC1099 273
µ
PC1100 273
µ
PC1150 273
µ
PC1228 257
µ
PC1237 258
µ
PC1251 270
µ
PC1316 257
µ
PC1458 270
µ
PC151 270
µ
PC1555 274
µ
PC1652 328
µ
PC1658 328
µ
PC1663 328
µ
PC1675 328
µ
PC1676 328
µ
PC1678 328
µ
PC1679 328
µ
PC1686 326
µ
PC1687 326
µ
PC1688 328
µ
PC16902 273
µ
PC1694 326
µ
PC177 271
µ
PC1830 264
µ
PC1851B 259
µ
PC1853 260
µ
PC1854A 259
µ
PC1857A 260
µ
PC1876 259
µ
PC1883 262
µ
PC1884 262
µ
PC1891A 260
µ
PC1892 260
µ
PC1905 273
µ
PC1909 273
µ
PC1933 273
µ
PC1934 273
µ
PC1935 273
µ
PC1943 272
µ
PC1944 272
µ
PC1945 272
µ
PC2251 272
µ
PC2253 272
µ
PC2255 272
µ
PC2260 272
µ
PC2400A 271
µ
PC24A00 271
µ
PC24M00A 271
µ
PC251 270
µ
PC2533 257
µ
PC2572 258
µ
PC2575 250
µ
PC2576 250
µ
PC258 270
µ
PC259 270
µ
PC2708 328
µ
PC2709 328
µ
PC271 271
µ
PC2710 328
µ
PC2711 328
µ
PC2712 328
µ
PC2713 328
µ
PC2714 328
µ
PC2715 328
µ
PC272 271
µ
PC2721 326
µ
PC2722 326
µ
PC2723 324
µ
PC2726 328
µ
PC2731 326
µ
PC2734 326
µ
PC2743 326
µ
PC2744 326
µ
PC2745 329
µ
PC2746 329
µ
PC2747 329
µ
PC2748 329
µ
PC2749 329
µ
PC2753 251,326
µ
PC2756 251,326
µ
PC2757 326
µ
PC2758 326
µ
PC2762 329
µ
PC2763 329
µ
PC2766 324
µ
PC2768 327
µ
PC277 271
µ
PC2771 329
µ
PC2775 326
µ
PC2776 329
µ
PC2781 261,324
µ
PC2782 261,326
µ
PC2791 329
µ
PC2792 329
µ
PC2794 326
µ
PC2795 261,326
µ
PC2797 326
µ
PC2798 261,326
µ
PC2799 324
µ
PC2800A 266
µ
PC2900 271
µ
PC29L00 271
µ
PC29M00 271
µ
PC29S10 272
µ
PC29S78 272
µ
PC305 272
µ
PC311 271
µ
PC317 272
µ
PC319 271
µ
PC3200 326
µ
PC3202 326
µ
PC3205 261,324
µ
PC3206 261,324
µ
PC3207 326
µ
PC3210 328
µ
PC3211 261,324
µ
PC324 270
µ
PC337 272
µ
PC339 271
µ
PC3403 270
µ
PC358 270
µ
PC393 271
µ
PC4061 270
µ
PC4062 270
µ
PC4064 270
µ
PC4071 270
µ
PC4072 270
µ
PC4074 270
µ
PC4081 270
µ
PC4082 270
µ
PC4084 270
µ
PC4091 270
µ
PC4092 270
µ
PC4093 270
µ
PC4094 270
µ
PC4250 270
µ
PC451 270
µ
PC452 270
µ
PC4556 270
µ
PC4557 270
µ
PC4558 270
µ
PC4559 270
µ
PC4560 270
µ
PC4570 270
µ
PC4572 270
µ
PC4574 270
µ
PC458 270
µ
PC4741 270
µ
PC4742 270
µ
PC4744 270
µ
PC494 273
µ
PC5020 222
µ
PC5021 222
µ
PC5022 222
µ
PC5023 222
µ
PC5024 222
µ
PC5031 222
µ
PC5032 222
µ
PC5034 222
µ
PC5200 222
µ
PC5201 222
µ
PC5202 222
µ
PC5203 222
µ
PC5204 222
µ
PC659A 267
µ
PC667 267
µ
PC7073 249
µ
PC741 270
µ
PC7800A 271
µ
PC78L00 271
µ
PC78M00A 271
µ
PC78N00 271
µ
PC7900A 271
µ
PC79L00 271
µ
PC79M00 271
µ
PC79N00 271
µ
PC8001 326
µ
PC8002 326
µ
PC801 270
µ
PC802 270
µ
PC803 270
µ
PC804 270
µ
PC8100 324,326
µ
PC8101 324
µ
PC8102 329
µ
PC8103 327
µ
PC8104 324
µ
PC8105 324
µ
PC8106 324
µ
PC8108 327
µ
PC8109 324
µ
PC811 270
µ
PC8110 324
µ
PC8112 326
µ
PC8116 327
µ
PC8119 324
µ
PC812 270
µ
PC8120 324
µ
PC8125 324
µ
PC8126 324
µ
PC8128 329
µ
PC8129 324
µ
PC813 270
µ
PC8130 324
µ
PC8131 324
µ
PC8139 324
µ
PC814 270
µ
PC815 270
µ
PC8151 329
µ
PC8152 329
µ
PC8158 324
µ
PC816 270
µ
PC8163 324
µ
PC821 270
µ
PC822 270
µ
PC824 270
µ
PC831 270
µ
PC832 270
µ
PC834 270
µ
PC842 270
µ
PC844 270
µ
PD16304 251
µ
PD16305 253
µ
PD16306 251
µ
PD16306A 251,253
µ
PD16306B 253
µ
PD16310 251,253
µ
PD16311 251
µ
PD16312 251
µ
PD16313 251
µ
PD16314 251
µ
PD16315 251
µ
PD16326 251
µ
PD16326A 251
µ
PD16327 253
µ
PD16331 253
µ
PD16334 253
µ
PD16335 253
µ
PD16337 253
µ
PD16364 253
µ
PD16430A 252
µ
PD16431A 252
µ
PD16432B 252
µ
PD16434 252
µ
PD16435 252
µ
PD16435A 252
µ
PD16435B 252
µ
PD16448A 253
µ
PD16501 265
µ
PD16502 265
µ
PD16510 265
µ
PD16520 265
µ
PD16633B 253
µ
PD16634A 253
µ
PD16638A 253
µ
PD16640A 253
µ
PD16640B 253
µ
PD16640C 253
µ
PD16644 253
Part number Page Part number PagePart number PagePart number Page Part number Page
388 Selection Guide X10679EJHV0SG00
Quick Reference Table by Part Number
µ
PD16647 253
µ
PD16650 253
µ
PD16652 253
µ
PD16654 253
µ
PD16655 253
µ
PD16661A 253
µ
PD16662 253
µ
PD16663 253
µ
PD16664 253
µ
PD16666A 253
µ
PD16667 253
µ
PD16670 252
µ
PD16675A 252
µ
PD16676 252
µ
PD16680 252
µ
PD16681 252
µ
PD16682 252
µ
PD16710 253
µ
PD16715 253
µ
PD16715A 253
µ
PD16732 253
µ
PD16732A 253
µ
PD16732B 253
µ
PD16740 253
µ
PD16750 253
µ
PD16780 253
µ
PD16803 254
µ
PD16804 254
µ
PD16805 254
µ
PD16808 254
µ
PD16813 254
µ
PD16814 254
µ
PD16818 254
µ
PD16823 254
µ
PD16833 254
µ
PD16833A 254
µ
PD16835 254
µ
PD16836 254
µ
PD16837 254
µ
PD16853B 254
µ
PD16855A 248,255
µ
PD16855B 248,255
µ
PD16855C 248,255
µ
PD16855D 248,255
µ
PD16856 254
µ
PD16857 254
µ
PD16858B 254
µ
PD16858C 254
µ
PD16874 248,255
µ
PD16875 248,255
µ
PD16877 254
µ
PD16901 254
µ
PD17001 15
µ
PD17003A 14
µ
PD17005 14
µ
PD17010 14
µ
PD17012 14
µ
PD17015 17
µ
PD17016 14
µ
PD17017 14
µ
PD17071 17
µ
PD17072 17
µ
PD17073 17
µ
PD17201A 18
µ
PD17203A 18
µ
PD17204 18
µ
PD17207 18
µ
PD17225 19
µ
PD17226 19
µ
PD17227 19
µ
PD17228 19
µ
PD17235 19
µ
PD17236 19
µ
PD17704 15
µ
PD17705 15
µ
PD17707 15
µ
PD17708 15
µ
PD17709 15
µ
PD17717 16
µ
PD17718 16
µ
PD17719 16
µ
PD178002 23
µ
PD178003 23
µ
PD178004A 23
µ
PD178006A 23
µ
PD178016A 23
µ
PD178018A 23
µ
PD178023 23
µ
PD178024 23
µ
PD178046 25
µ
PD178048 25
µ
PD178076 24
µ
PD178078 24
µ
PD178096 24
µ
PD178098 24
µ
PD178F048 25
µ
PD178F098 24
µ
PD178P018A 23
µ
PD17933A 17
µ
PD17934A 17
µ
PD17P001 15
µ
PD17P005 14
µ
PD17P010 14
µ
PD17P012 14
µ
PD17P073 17
µ
PD17P203A 18
µ
PD17P204 18
µ
PD17P207 18
µ
PD17P228 19
µ
PD17P236 19
µ
PD17P709 15
µ
PD17P719 16
µ
PD23C128000L 151
µ
PD23C128040L 151
µ
PD23C16000AL 151
µ
PD23C16040AL 151
µ
PD23C24000 151
µ
PD23C24020 151
µ
PD23C32000A 151
µ
PD23C32000L 151
µ
PD23C32020A 151
µ
PD23C32040L 151
µ
PD23C32082L 151
µ
PD23C32202L 151
µ
PD23C64000AL 151
µ
PD23C64020 151
µ
PD23C64040AL 151
µ
PD26401 152
µ
PD26411 152
µ
PD29F008AL-X 152
µ
PD29F800AL-X 152
µ
PD30121 106
µ
PD30200 106
µ
PD30210 106
µ
PD30500 106
µ
PD30540 106
µ
PD30541 106
µ
PD30700 106
µ
PD30710 106
µ
PD3719 243
µ
PD3728 243
µ
PD3729 243
µ
PD3734A 243
µ
PD3739 243
µ
PD3753 243
µ
PD3794 243
µ
PD3797 243
µ
PD3799 243
µ
PD431000A 146
µ
PD431000A-X 147
µ
PD431231L 149
µ
PD431532L 149
µ
PD431536L 149
µ
PD431632L 149
µ
PD431636L 149
µ
PD432232L 149
µ
PD43256B 146
µ
PD43256B-X 147
µ
PD43257B 146
µ
PD432836AL 149
µ
PD432836L 149
µ
PD434001A 148
µ
PD434001AL 148
µ
PD434004A 148
µ
PD434004AL 148
µ
PD434008A 148
µ
PD434008AL 148
µ
PD434016A 148
µ
PD434016AL 148
µ
PD441000L-X 147
µ
PD442000L-X 147
µ
PD444010L-X 147
µ
PD444012L-X 147
µ
PD45128163 139
µ
PD45128441 139
µ
PD45128841 139
µ
PD45256163 138
µ
PD45256441 138
µ
PD45256841 138
µ
PD4564163 140
µ
PD4564323 140
µ
PD4564441 140
µ
PD4564841 140
µ
PD4565161 141
µ
PD4565421 141
µ
PD4565821 141
µ
PD45D128164 141
µ
PD45D128442 141
µ
PD45D128842 141
µ
PD464318AL 150
µ
PD464318L 150
µ
PD464336AL 150
µ
PD464336L 150
µ
PD464518AL 150
µ
PD464518L 150
µ
PD464536AL 150
µ
PD464536L 150
µ
PD4701A 266
µ
PD4702 266
µ
PD4704 266
µ
PD4711B 267
µ
PD4712C 267
µ
PD4712D 267
µ
PD4713A 267
µ
PD4714A 267
µ
PD4715A 267
µ
PD4721 267
µ
PD4722 267
µ
PD4723 267
µ
PD4724 267
µ
PD4726 267
µ
PD485505 153
µ
PD485506 153
µ
PD488385 141
µ
PD488448 141
µ
PD488488 141
µ
PD4990A 266
µ
PD4991A 266
µ
PD4992 266
µ
PD5205 274
µ
PD5555 274
µ
PD5556 274
µ
PD61012 256
µ
PD61030 256
µ
PD6121G-001 266
µ
PD6122G-001 266
µ
PD6133 20
µ
PD6134 20
µ
PD61511 261
µ
PD61882A 262
µ
PD61P34B 20
µ
PD62 21
µ
PD6221 267
µ
PD6222 267
µ
PD6320 251,253,254
µ
PD63200 257
µ
PD6321 251,253,254
µ
PD63210 257
µ
PD63210L 257
µ
PD6323 251
µ
PD6323B 251
µ
PD6325 267
µ
PD6326 267
µ
PD63310 257
µ
PD6335 267
µ
PD6336 267
µ
PD6340 251
µ
PD6345 254
µ
PD63702A 258
µ
PD63710 258
µ
PD63724A 250
µ
PD63725 250
µ
PD6376 257
µ
PD6379 257
µ
PD6379A 257
µ
PD6379AL 257
µ
PD6379L 257
µ
PD63A 21
µ
PD64 21
µ
PD64082 263
µ
PD6461 265
µ
PD6462 265
µ
PD6464A 265
µ
PD6465 265
µ
PD6466 265
µ
PD65 21
µ
PD65443 219
µ
PD65444 219
µ
PD65445 219
µ
PD65446 219
µ
PD65448 219
µ
PD65449 219
µ
PD65451 219
µ
PD65454 219
µ
PD65456 219
µ
PD65458 219
µ
PD65611 178
µ
PD65621 178
µ
PD65625 178
µ
PD65630 177
µ
PD65636 177
µ
PD65640 177
µ
PD65643 178
µ
PD65646 177
µ
PD65650 177
µ
PD65653 178
µ
PD65654 177
µ
PD65656 177
µ
PD65658 177
µ
PD65662 177
µ
PD65664 177
µ
PD65672 177
µ
PD65676 177
µ
PD65800 180
µ
PD65801 180
µ
PD65802 180
µ
PD65803 180
µ
PD65804 180
µ
PD65806 180
µ
PD65808 180
µ
PD65810 180
µ
PD65811 180
µ
PD65812 180
µ
PD65813 180
µ
PD65837 184
µ
PD65839 184
µ
PD65840 184
µ
PD65841 184
µ
PD65842 184
µ
PD65843 184
µ
PD65845 184
µ
PD65846 184
µ
PD65848 184
µ
PD65849 184
µ
PD65850 184
µ
PD65851 184
µ
PD65852 184
µ
PD65853 184
µ
PD65855 184
µ
PD65858 184
µ
PD65860 185
µ
PD65861 185
µ
PD65862 185
µ
PD65863 185
µ
PD65865 185
µ
PD65866 185
µ
PD65868 185
µ
PD65869 185
µ
PD65870 185
µ
PD65871 185
Part number Page Part number PagePart number PagePart number Page Part number Page
Quick Reference Table by Part Number
Selection Guide X10679EJHV0SG00 389
µ
PD65872 185
µ
PD65873 185
µ
PD65875 185
µ
PD65878 185
µ
PD65880 183
µ
PD65881 183
µ
PD65882 183
µ
PD65883 183
µ
PD65884 183
µ
PD65885 183
µ
PD65887 183
µ
PD65889 183
µ
PD65890 183
µ
PD65893 183
µ
PD65943 189
µ
PD65944 189
µ
PD65945 189
µ
PD65946 189
µ
PD65948 189
µ
PD65949 189
µ
PD65951 189
µ
PD65954 189
µ
PD65956 189
µ
PD65958 189
µ
PD6604 20
µ
PD66P04B 20
µ
PD6700 251
µ
PD6708 245
µ
PD67821 196
µ
PD67822 196
µ
PD67823 196
µ
PD67824 196
µ
PD67825 196
µ
PD67826 196
µ
PD67827 196
µ
PD67828 196
µ
PD67829 196
µ
PD67830 196
µ
PD67831 196
µ
PD680×× 229
µ
PD68000 228
µ
PD68001 228
µ
PD68010 228
µ
PD68011 228
µ
PD68031 228
µ
PD68041 228
µ
PD68061 228
µ
PD68070 228
µ
PD681×× 236
µ
PD6P4B 21
µ
PD703002 104
µ
PD703003 103
µ
PD703003A 103
µ
PD703004A 103
µ
PD703006 102
µ
PD703008 102
µ
PD703008Y 102
µ
PD703015 100
µ
PD703015Y 100
µ
PD703017 100
µ
PD703017Y 100
µ
PD703025A 103
µ
PD703033 101
µ
PD703033Y 101
µ
PD703100 99
µ
PD703100-A 99
µ
PD703101 99
µ
PD703101-A 99
µ
PD703102 99
µ
PD703102-A 99
µ
PD705101 98
µ
PD705102 98
µ
PD70741 98
µ
PD70F3003 103
µ
PD70F3003A 103
µ
PD70F3008 102
µ
PD70F3008Y 102
µ
PD70F3017 100
µ
PD70F3017Y 100
µ
PD70F3025A 103
µ
PD70F3033 101
µ
PD70F3033Y 101
µ
PD70F3035 101
µ
PD70F3035Y 101
µ
PD70F3102 99
µ
PD70F3102-A 99
µ
PD70P3002 104
µ
PD72001-11 245
µ
PD72001-A8 245
µ
PD72002-11 245
µ
PD72011 247
µ
PD72012 247
µ
PD72042A 245
µ
PD72042B 245
µ
PD72103A 245
µ
PD72107 245
µ
PD7225 252
µ
PD72254Y 255
µ
PD72305 245
µ
PD72850 248
µ
PD72861 248
µ
PD72870 248
µ
PD72871 248
µ
PD750004 3
µ
PD750006 3
µ
PD750008 3
µ
PD750064 5
µ
PD750066 5
µ
PD750068 5
µ
PD750104 4
µ
PD750106 4
µ
PD750108 4
µ
PD753012A 8
µ
PD753016A 8
µ
PD753017A 8
µ
PD753036 12
µ
PD753104 9
µ
PD753106 9
µ
PD753108 9
µ
PD753204 10
µ
PD753206 10
µ
PD753208 10
µ
PD753304 11
µ
PD754144 7
µ
PD754202 7
µ
PD754244 7
µ
PD754264 7
µ
PD754302 6
µ
PD754304 6
µ
PD75F4264 7
µ
PD75P0016 3
µ
PD75P0076 5
µ
PD75P0116 4
µ
PD75P3018A 8
µ
PD75P3036 12
µ
PD75P3116 9
µ
PD75P3216 10
µ
PD75P4308 6
µ
PD77016 240
µ
PD77018A 240
µ
PD77019 240
µ
PD77019-013 240
µ
PD77110 240
µ
PD77111 240
µ
PD77112 240
µ
PD780016AY 59
µ
PD780018AY 59
µ
PD780021A 49
µ
PD780021AY 50
µ
PD780022A 49
µ
PD780022AY 50
µ
PD780023A 49
µ
PD780023AY 50
µ
PD780024A 49
µ
PD780024AY 50
µ
PD780031A 49
µ
PD780031AY 50
µ
PD780032A 49
µ
PD780032AY 50
µ
PD780033A 49
µ
PD780033AY 50
µ
PD780034A 49
µ
PD780034AY 50
µ
PD780053 57
µ
PD780053Y 58
µ
PD780054 57
µ
PD780054Y 58
µ
PD780055 57
µ
PD780055Y 58
µ
PD780056 57
µ
PD780056Y 58
µ
PD780058 57
µ
PD780058Y 58
µ
PD780065 52
µ
PD780076 51
µ
PD780076Y 51
µ
PD780078 51
µ
PD780078Y 51
µ
PD78011F 46
µ
PD78011FY 47
µ
PD78011H 48
µ
PD78012F 46
µ
PD78012FY 47
µ
PD78012H 48
µ
PD78013F 46
µ
PD78013FY 47
µ
PD78013H 48
µ
PD78014F 46
µ
PD78014FY 47
µ
PD78014H 48
µ
PD78015F 46
µ
PD78015FY 47
µ
PD78016F 46
µ
PD78016FY 47
µ
PD78018F 46
µ
PD78018FY 47
µ
PD780204 66
µ
PD780205 66
µ
PD780206 66
µ
PD780208 66
µ
PD780232 67
µ
PD780306 70
µ
PD780306Y 70
µ
PD780308 70
µ
PD780308Y 70
µ
PD78042F 64
µ
PD78043F 64
µ
PD78044F 64
µ
PD78044H 65
µ
PD78045F 64
µ
PD78045H 65
µ
PD78046H 65
µ
PD78052 53
µ
PD78052Y 54
µ
PD78053 53
µ
PD78053Y 54
µ
PD78054 53
µ
PD78054Y 54
µ
PD78055 53
µ
PD78055Y 54
µ
PD78056 53
µ
PD78056F 55
µ
PD78056FY 56
µ
PD78056Y 54
µ
PD78058 53
µ
PD78058F 55
µ
PD78058FY 56
µ
PD78058Y 54
µ
PD78062 68
µ
PD78062Y 69
µ
PD78063 68
µ
PD78063Y 69
µ
PD78064 68
µ
PD78064B 68
µ
PD78064Y 69
µ
PD780701Y 78
µ
PD780702Y 78
µ
PD78070A 62
µ
PD78070AY 62
µ
PD78074B 60
µ
PD78075B 60
µ
PD78076 60
µ
PD78076Y 61
µ
PD78078 60
µ
PD78078Y 61
µ
PD78081 63
µ
PD78082 63
µ
PD780831Y 79
µ
PD780833Y 79
µ
PD780840 72
µ
PD780841 72
µ
PD780948 77
µ
PD780949 77
µ
PD780955 73
µ
PD780957 74
µ
PD780958 74
µ
PD78095B 76
µ
PD78096B 76
µ
PD780973 75
µ
PD780982 71
µ
PD780983 71
µ
PD780984 71
µ
PD780986 71
µ
PD780988 71
µ
PD78098B 76
µ
PD784031 82
µ
PD784031Y 83
µ
PD784035 82
µ
PD784035Y 83
µ
PD784036 82
µ
PD784036Y 83
µ
PD784037 82
µ
PD784037Y 83
µ
PD784038 82
µ
PD784038Y 83
µ
PD784044 84
µ
PD784046 84
µ
PD784054 84
µ
PD784214 85
µ
PD784214Y 86
µ
PD784215 85
µ
PD784215Y 86
µ
PD784216 85
µ
PD784216Y 86
µ
PD784217 87
µ
PD784217Y 88
µ
PD784218 87
µ
PD784218Y 88
µ
PD784224 89
µ
PD784224Y 90
µ
PD784225 89
µ
PD784225Y 90
µ
PD784907 94
µ
PD784908 94
µ
PD784915 91
µ
PD784915A 91
µ
PD784915B 91
µ
PD784916A 91
µ
PD784916B 91
µ
PD784927 92
µ
PD784927Y 93
µ
PD784928 92
µ
PD784928Y 93
µ
PD784935 95
µ
PD784936 95
µ
PD784937 95
µ
PD784938 95
µ
PD784953 96
µ
PD784955 96
µ
PD789011 28
µ
PD789012 28
µ
PD789022 29
µ
PD789024 29
µ
PD789025 29
µ
PD789026 29
µ
PD789046 30
µ
PD789101A 31
µ
PD789102A 31
µ
PD789104A 31
µ
PD789111A 31
µ
PD789112A 31
µ
PD789114A 31
µ
PD789121A 32
µ
PD789122A 32
µ
PD789124A 32
µ
PD789131A 32
µ
PD789132A 32
µ
PD789134A 32
µ
PD789166 33
µ
PD789167 33
Part number Page Part number PagePart number PagePart number Page Part number Page
390 Selection Guide X10679EJHV0SG00
Quick Reference Table by Part Number
µ
PD789176 33
µ
PD789177 33
µ
PD789304 34
µ
PD789306 34
µ
PD789314 34
µ
PD789316 34
µ
PD789405A 35
µ
PD789406A 35
µ
PD789407A 35
µ
PD789415A 35
µ
PD789416A 35
µ
PD789417A 35
µ
PD789426 36
µ
PD789427 36
µ
PD789436 36
µ
PD789437 36
µ
PD789446 37
µ
PD789447 37
µ
PD789456 37
µ
PD789457 37
µ
PD789800 39
µ
PD789830 38
µ
PD789841 40
µ
PD789842 40
µ
PD78F0034A 49
µ
PD78F0034AY 50
µ
PD78F0058 57
µ
PD78F0058Y 58
µ
PD78F0066 52
µ
PD78F0078 51
µ
PD78F0078Y 51
µ
PD78F0233 67
µ
PD78F0701Y 78
µ
PD78F0833Y 79
µ
PD78F0841 72
µ
PD78F0948 77
µ
PD78F0949 77
µ
PD78F0974 75
µ
PD78F0988 71
µ
PD78F4046 84
µ
PD78F4216 85
µ
PD78F4216Y 86
µ
PD78F4218 87
µ
PD78F4218Y 88
µ
PD78F4225 89
µ
PD78F4225Y 90
µ
PD78F4928 92
µ
PD78F4928Y 93
µ
PD78F4938 95
µ
PD78F4956 96
µ
PD78F9026A 29
µ
PD78F9046 30
µ
PD78F9116A 31
µ
PD78F9136A 32
µ
PD78F9177 33
µ
PD78F9418A 35
µ
PD78F9437 36
µ
PD78F9457 37
µ
PD78F9801 39
µ
PD78F9831 38
µ
PD78F9842 40
µ
PD78P0018AY 59
µ
PD78P018F 46
µ
PD78P018FY 47
µ
PD78P0208 66
µ
PD78P0308 70
µ
PD78P0308Y 70
µ
PD78P048A 64
µ
PD78P054 53
µ
PD78P058 53
µ
PD78P058F 55
µ
PD78P058FY 56
µ
PD78P058Y 54
µ
PD78P064 68
µ
PD78P064B 68
µ
PD78P078 60
µ
PD78P078Y 61
µ
PD78P083 63
µ
PD78P098B 76
µ
PD78P4038 82
µ
PD78P4038Y 83
µ
PD78P4908 94
µ
PD78P4916 91
µ
PD78P9014 28
µ
PD822XX 207
µ
PD826XX 207
µ
PD93000 204
µ
PD94000 204
µ
PD95100 204
µ
PD96100 204
µ
PD9611 249
µ
PD97000 205
µ
PD98201 245
µ
PD98203 245
µ
PD98401A 246
µ
PD98404 246
µ
PD98405 246
µ
PD98408 246
µ
PD98409 246
µ
PD98410 246
µ
PD98411 246
µ
PD98421 247
µ
PD98431 247
µ
PD99000 205
µ
PD9903 249
µ
PG100 328
µ
PG101 328
µ
PG103 328
µ
PG110 328
µ
PG132 327
µ
PG133 327
µ
PG137 327
µ
PG138 327
µ
PG139 327
µ
PG152 327
µ
PG153 327
µ
PG154 327
µ
PG155 327
µ
PG170 329
µ
PG171 330
µ
PG173 330
µ
PG174 330
µ
PG175 324,330
µ
PG501 325
µ
PG502 325
µ
PG503 325
µ
PG504 325
µ
PG506 325
µ
PG508 325
[ N ]
NDL3325ST 380
NDL3325SU 380
NDL5421P 382
NDL5422P 382
NDL5461P 382
NDL5481P 382
NDL5506P 382
NDL5516P 382
NDL5520C 382
NDL5521P 382
NDL5522P 382
NDL5530 382
NDL5530C 382
NDL5531P 382
NDL5551P 382
NDL5590P 382
NDL5592P 382
NDL7001 380
NDL7001L 380
NDL7103 381
NDL7113 381
NDL7153 381
NDL7163 381
NDL7401P 380
NDL7408P 380
NDL7502P 381
NDL7503P 381
NDL7510P 381
NDL7512P 381
NDL7513P 381
NDL7514P 381
NDL7515P 381
NDL7540PA 381
NDL7552P 381
NDL7553P 381
NDL7560P 381
NDL7562P 381
NDL7563P 381
NDL7564P 381
NDL7565P 381
NDL7580P 381
NDL7603P 380
NDL7620P 380
NDL7701P 380
NDL7705P 380
NDL7910P 380
NE02133 336
NE02135 336
NE02139E 336
NE050214-12 343
NE050214E-12 343
NE1280100 342
NE1280200 342
NE1280400 342
NE23383B 339
NE24200 339
NE24283B 339
NE25118 335
NE25139 335
NE25339 335
NE27200 339
NE3210S01 339
NE32484A 339
NE32500 339
NE32584C 339
NE325S01 339
NE32900 339
NE329S01 339
NE33284A 339
NE334S01 339
NE34018 339
NE38018 339
NE4210M01 340
NE42484A 340
NE42484C 340
NE425S01 340
NE428M01 340
NE429M01 340
NE434S01 340
NE46134 336
NE46234 336
NE58030 336
NE58119 336
NE58130 336
NE58133 336
NE58219 336
NE58230 336
NE58233 336
NE61030 336
NE6500379A 343
NE6500496 343
NE6501077 343
NE650R279A 343
NE650R479A 343
NE6510179A 343
NE6510379A 343
NE651R479A 343
NE674 339
NE68018 337
NE68019 336
NE68030 336
NE68033 336
NE68035 336
NE68039E 336
NE68118 337
NE68119 336
NE68130 336
NE68132 336
NE68133 336
NE68135 336
NE68139E 336
NE68141 336
NE68330 336
NE68418 337
NE68419 336
NE68430 336
NE68433 336
NE68439E 336
NE68518 337
NE68519 336
NE68530 336
NE68533 336
NE68539E 336
NE68618 337
NE68619 337
NE68630 337
NE68633 337
NE68639 337
NE68718 337
NE68719 337
NE68730 337
NE68733 337
NE68739 337
NE68818 337
NE68819 337
NE68830 337
NE68833 337
NE68839 337
NE68939 341
NE69039 341
NE696M01 337
NE71300 339
NE71383B 339
NE72118 339
NE721S01 339
NE72218 339
NE73430 336
NE73435 336
NE73440B 336
NE76000 339
NE76038 339
NE76083A 339
NE76084 339
NE76118 339
NE76184A 339
NE8500199 341
NE8500295 341
NE850R599A 341
NE85618 337
NE85619 336
NE85630 336
NE85632 336
NE85633 336
NE85634 336
NE85635 336
NE85639E 336
NE85641 336
NE92039 335
NE92239 335
NE92439 335
NE92739 335
NE92939 335
NE93039 335
NE93139 335
NE93218 335
NE93239 335
NE93318 335
NE93339 335
NE94433 336
NE960R275 343
NE960R575 343
NEL150181-12 342
NEL2001 342
NEL2004 342
NEL2012 342
NEL2012F03-24 342
NEL2035 342
NEM0214068-28 343
NEM085068-28 343
NEM0899F06-30 343
NEM0995F01-30 343
NEM0995F06-30 343
NES1417B-30 343
NES1821B-30 343
NES1821P-30 343
NES1821P-50 343
NES1823P-100 343
NES2527B-30 343
NEZ1011 343
Part number Page Part number PagePart number PagePart number Page Part number Page
Quick Reference Table by Part Number
Selection Guide X10679EJHV0SG00 391
NEZ1414 342
NEZ3642 341
NEZ4450 341
NEZ5964 341
NEZ6472 341,342
NEZ7177 342
NEZ7785 342
NL1000 378
NL1100 378
NL2100 378
NL2110 378
NNCD[ ]A 320
NNCD[ ]B 320
NNCD[ ]C 319
NNCD[ ]D 319
NNCD[ ]E 319
NNCD[ ]F 319
NNCD[ ]G 319
NNCD[ ]LG 319
NNCD[ ]LH 319
NNCD[ ]MF 319
NNCD[ ]MG 319
NX8501 380
NX8562LB 380
NX8563LB 380
[ P ]
PS2501 360
PS2502 362
PS2503 365
PS2505 363
PS2506 364
PS2511 360
PS2521 368
PS2525 368
PS2532 366
PS2533 366
PS2561 360
PS2562 362
PS2565 363
PS2566 364
PS2571 360
PS2581 360
PS2601 360
PS2602 360
PS2603 362
PS2604 362
PS2605 363
PS2606 363
PS2607 364
PS2608 364
PS2621 368
PS2622 368
PS2625 368
PS2626 368
PS2633 366
PS2634 366
PS2651 361
PS2652 361
PS2653 362
PS2654 362
PS2701 361
PS2702 362
PS2703 365
PS2705 363
PS2706 364
PS2707 365
PS2732 366
PS2733 366
PS2801 361
PS2802 362
PS2805 363
PS2806 364
PS2832 367
PS7111-2A 374
PS7112-1A 374
PS7113-1A 374
PS7113-2A 374
PS7122-1A 374
PS7122-2A 374
PS7122A-1A 374
PS7122A-1B 374
PS7122A-1C 374
PS7122A-2A 374
PS7122A-2B 374
PS7141-1A 374
PS7141-1B 374
PS7141-1C 374
PS7141-2A 374
PS7141-2B 374
PS7141C-2A 376
PS7142-1A 374
PS7142-1B 374
PS7142-1C 374
PS7142-2A 374
PS7142-2B 374
PS7160-1A 374
PS7160-2A 374
PS7200A-1A 374
PS7200B-1A 374
PS7211-2A 374
PS7212-1A 374
PS7221-2A 374
PS7241-1A 374
PS7241-1B 374
PS7241-1C 374
PS7241-2A 374
PS7241-2B 374
PS7241-AT1 375
PS7241-AT5 375
PS7241C-1A 376
PS7241C-AT1 376
PS7241C-AT5 376
PS7341-1A 375
PS7341C-1A 376
PS7342-1A 375
PS7342C-1A 376
PS7360-1A 375
PS7522-1A 375
PS7522-2A 375
PS7841-A15 375
PS8601 369
PS8602 369
PS8701 369
PS9601 369
PS9611 369
PS9634 369
PS9701 369
PS9711 369
[ R ]
RD[ ]E 318
RD[ ]ES 318
RD[ ]F 318
RD[ ]FM 317
RD[ ]JS 318
RD[ ]M 317
RD[ ]MW 317
RD[ ]P 317
RD[ ]S 317
RD[ ]SL 317
RD[ ]UJ 317
RD[ ]UM 317
Memory (English / Japanese) 1999.4
Synchronous DRAM, Synchronous DRAM Module, Rambus DRAM, Rambus Module,
ASM, Static RAM, Mask ROM, Flash Memory, Combo Chip
Microcomputer (English / Japanese) 1999.4
4-bit MCU (75XL, 17K,
µ
PD63), 8-bit MCU (178K, 78K/0S, 78K/0), 16-bit MCU (78K/IV),
32-bit MPU & MCU (V810, V830, V850), Development Tools
Display Controller / Driver IC, General Purpose Digital IC (English) 1999.1
MOS FET (English) 1998.5
Power MOS FET, Signal MOS FET
RF & Microwave Devices (English) 1998.8
Silicon Microwave Monolithic IC, High frequency Silicon Transister, GaAs Devices
Optoelectronic Devices - NEPOC Series - (English) 1999.1
Photocoupler, OCMOS FET (Solid State Relay), Infrared Transceiver
NEC Semiconductor Data Book List
NEC Semiconductor Data Book CD-ROM List (April 1999)
Following is the list of the Semiconductor Data Books NEC has published.
If you need a copy, please ask our sales representative.
Title / Items Date Published
NEC Corporation
NEC Building
7-1, Shiba 5-chome, Minato-ku
Tokyo 108-8001, Japan
Tel: 03-3454-1111
http://www.ic.nec.co.jp/
[North & South America]
NEC Electronics Inc.
2880 Scott Blvd.
Santa Clara, CA 95050-2554, U.S.A.
Tel: 408-588-6000
800-366-9782
Fax: 408-588-6130
800-729-9288
http://www.necel.com/
NEC do Brasil S.A.
Electron Devices Division
Rodovia Presidente Dutra, Km 214
07210-902-Guarulhos-SP Brasil
Tel: 55-11-6465-6810
Fax: 55-11-6465-6829
For further information, please contact:
Document No. X10679EJHV0SG00(17th edition)
Date Published April 1999 N CP(K)
G99. 1
Printed in Japan
[Europe]
NEC Electronics (Germany) GmbH
Kanzlerstr. 2,
40472 Düsseldorf
Germany
Tel: 0211-650302
Fax: 0211-6503490
Munich Office
Arabellastr. 17
81925 München, Germany
Tel: 089-921003-0
Fax: 089-92100315
Stuttgart Office
Industriestr. 3
70507 Stuttgart, Germany
Tel: 0711-99010-0
Fax: 0711-99010-19
Hannover Office
Königstr. 12
30175 Hannover, Germany
Tel: 0511-33402-0
Fax: 0511-33402-34
Benelux Office
Boschdijk 187a
5612 HB Eindhoven,
The Netherlands
Tel: 040-2445845
Fax: 040-2444580
Scandinavia Office
P.O. Box 134
18322 Taeby, Sweden
Tel: 08-6380820
Fax: 08-6380388
NEC Electronics (UK) Limited
Cygnus House, Sunrise Park Way,
Milton Keynes, MK14 6NP, U.K.
Tel: 01908-691-133
Fax: 01908-670-290
NEC Electronics (France) S.A.
9, rue Paul Dautier-BP 187
78142 Velizy-Villacoublay Cédex
France
Tel: 01-30-67-58-00
Fax: 01-30675899
Madrid Office
Juan Esplandiu, 15
28007 Madrid, Spain
Tel: 91-504-2787
Fax: 91-504-2860
NEC Electronics Italiana s.r.l.
Via Fabio Filzi, 25/A,
20124 Milano, Italy
Tel: 02-667541
Fax: 02-66754299
[Asia & Oceania]
NEC Electronics Hong Kong Limited
12/F., Cityplaza 4,
12 Taikoo Wan Road, Hong Kong
Tel: 2886-9318
Fax: 2886-9022/9044
Seoul Branch
10F, ILSONG Bldg., 157-37,
Samsung-Dong, Kangnam-Ku
Seoul, the Republic of Korea
Tel: 02-528-0303
Fax: 02-528-4411
NEC Electronics Taiwan Ltd.
7F, No. 363 Fu Shing North Road
Taipei, Taiwan, R. O. C.
Tel: 02-2719-2377
Fax: 02-2719-5951
NEC Electronics Singapore Pte. Ltd.
101 Thomson Road #04-01/05
United Square, Singapore 307591
Tel: 65-253-8311
Fax: 65-250-3583
© NEC Corporation 1999
