M/58112/09
●Compact dimensions
●Compressed air driven
●Low sound level
●Easy installation
Vacuum Pump
- 0,85 bar
Ordering Information
To order a vacuum pump
quote: M/58112/09
9/96 N/UK 3.4.005.01
Technical Data
Medium:
Compressed air, filtered and non-lubricated
Operation:
Single stage ejector
Operating Pressure:
5 bar optimum
8 bar maximum
Vacuum:
- 0,85 bar maximum
Operating Temperature:
+150˚C
Weight:
0,054 kg
Sound Level:
66/74 dB (A) vacuum port closed/ open
Materials:
Anodised aluminium housing, brass nozzles
Accessories See page
Pneumatic vacuum switch N 4.3.101.01
Electric vacuum switch N 4.3.111.01
Electronic vacuum switch N 4.3.121.01
Flat suction cups N 3.5.011.01
Bellows suction cups N 3.5.031.01
Vacuum gauge N 3.4.015.03
P+ R
P-
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
For your local Norgren Technical Sales Centre phone 0345 662266. For your local Norgren Distributor phone 0345 227777.
IMI Norgren Limited, PO Box 22, Eastern Avenue, Lichfield, Staffordshire WS13 6SB
Basic Dimensions
M/58112/09
9/96
N/UK 3.4.005.02
Characteristics (All values given apply to an atmospheric pressure of 1013 mbar)
Induced air (Nl/min), free air
G 1/8
7
16,5
25
ø 4,5
R
P+
P-
G 1/8
27
20
42
Warning
These products are intended for use in industrial compressed air sys-
tems only. Do not use these products where pressures and tempera-
tures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems, or other applica-
tions not within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in
fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of
all component parts used in fluid power systems and to provide ade-
quate safeguards to prevent personal injury or damage to equipment
in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with
these products.
Time (sec) for evacuation of 1 litre volume to vacuum
Model - 0,1 - 0,2 - 0,3 - 0,4 - 0,5 - 0,6 - 0,7 - 0,8 0,85
M/58112/09 0,27 0,56 0,89 1,44 2,00 2,88 4,31 7,97 14,36
Model 0 - 0,1 - 0,2 - 0,3 - 0,4 - 0,5 - 0,6 - 0,7 - 0,8
M/58112/09 28 24 18 14 11 8 5,5 3 1
Tube Dimensions
Recommended tube dimensions
(internal diameter)
(Nl / min.)
Air Consumption
Operating Pressure
12345 8
76
0
0
10
20
30
40
50
60
70
80
90
100
( bar )
Vacuum
( bar )
Operating Pressure
12345 8
76
0
0
- 0,1
- 0,2
- 0,3
- 0,4
- 0,5
- 0,6
- 0,7
- 0,8
- 0,9
- 1,0
( bar )
Note: Values given in the tables are theoretical and apply to an operating pressure of 5 bar
Model Compressed air Vacuum Exhaust
M/58112/09 ≥∅ 3≥∅ 6≥∅ 6
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
For your local Norgren Technical Sales Centre phone 0345 662266. For your local Norgren Distributor phone 0345 227777.
IMI Norgren Limited, PO Box 22, Eastern Avenue, Lichfield, Staffordshire WS13 6SB
