12105X104KSJ9A - AVX - Product.Network

X7R Dielectric

General Specifications

X7R formulations are called “temperature stable” ceramics and

fall into EIA Class II materials. X7R is the most popular of these

intermediate dielectric constant materials. Its temperature varia-

tion of capacitance is within ±15% from -55°C to +125°C. This

capacitance change is non-linear.

Capacitance for X7R varies under the influence of electrical op-

erating conditions such as voltage and frequency.

X7R dielectric chip usage covers the broad spectrum of

industrial applications where known changes in capacitance

due to applied voltages are acceptable.

PART NUMBER (see page 2 for complete part number explanation)

% Cap Change

-60 -40 -20 0 20 40 60 80 100 120 140

Temperature °C

X7R Dielectric�

Typical Temperature Coefficient

-5

-10

-15

-20

-25

% ⌬ Capacitance

+10

+20

+30

-10

-20

-30

1KHz 10 KHz 100 KHz 1 MHz 10 MHz

Frequency

⌬ Capacitance vs. Frequency

Insulation Resistance (Ohm-Farads)

1,000

10,000

100

0020 120

40 60 80

Temperature °C

Insulation Resistance vs Temperature

100

Impedance, ⍀

10 100 1000

Frequency, MHz

Variation of Impedance with Cap Value�

Impedance vs. Frequency�

1,000 pF vs. 10,000 pF - X7R�

0805�

�

0.10

0.01

1.00

1,000 pF

10,000 pF

10.00

Impedance, ⍀

110

100 1,000

Frequency, MHz

Variation of Impedance with Chip Size�

Impedance vs. Frequency�

100,000 pF - X7R�

�

0.1

.01

1.0

1206

0805

1210

Impedance, ⍀

110

100 1,000

Frequency, MHz

Variation of Impedance with Chip Size�

Impedance vs. Frequency�

10,000 pF - X7R�

�

0.1

.01

1.0

1206

0805

1210

0805

Size

(L" x W")

Voltage

4V = 4

6.3V = 6

10V = Z

16V = Y

25V = 3

50V = 5

100V = 1

200V = 2

500V = 7

Dielectric

X7R = C

103

Capacitance

Code (In pF)

2 Sig. Digits +

Number of Zeros

Capacitance

Tolerance

J = ± 5%*

K = ±10%

M = ± 20%

*≤1μF only,

contact factory for

additional values

Packaging

2 = 7" Reel

4 = 13" Reel

7 = Bulk Cass.

9 = Bulk

Contact

Factory For

Multiples

Special

Code

A = Std. Product

Terminations

T = Plated Ni

and Sn

7 = Gold Plated*

Z= FLEXITERM®**

Failure

Rate

A = Not

Applicable

*Optional termination

**See FLEXITERM®

X7R section

NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers.

Contact factory for non-specified capacitance values.

X7R Dielectric

Specifications and Test Methods

Parameter/Test X7R Specification Limits Measuring Conditions

Operating Temperature Range -55ºC to +125ºC Temperature Cycle Chamber

Capacitance Within specified tolerance

≤ 2.5% for ≥ 50V DC rating Freq.: 1.0 kHz ± 10%

Dissipation Factor ≤ 3.0% for 25V DC rating Voltage: 1.0Vrms ± .2V

≤ 3.5% for 25V and 16V DC rating

≤ 5.0% for ≤ 10V DC rating

Insulation Resistance 100,000MΩ or 1000MΩ - μF, Charge device with rated voltage for

whichever is less 120 ± 5 secs @ room temp/humidity

Charge device with 300% of rated voltage for

Dielectric Strength No breakdown or visual defects 1-5 seconds, w/charge and discharge current

limited to 50 mA (max)

Note: Charge device with 150% of rated

voltage for 500V devices.

Appearance No defects Deflection: 2mm

Capacitance Test Time: 30 seconds

Resistance to Variation ≤ ±12%

Flexure Dissipation Meets Initial Values (As Above)

Stresses Factor

Insulation ≥ Initial Value x 0.3

Resistance

Solderability ≥ 95% of each terminal should be covered Dip device in eutectic solder at 230 ± 5ºC

with fresh solder for 5.0 ± 0.5 seconds

Appearance No defects, <25% leaching of either end terminal

Capacitance

Variation ≤ ±7.5%

Dip device in eutectic solder at 260ºC for 60

Dissipation Meets Initial Values (As Above) seconds. Store at room temperature for 24 ± 2

Resistance to Factor hours before measuring electrical properties.

Solder Heat Insulation Meets Initial Values (As Above)

Resistance

Dielectric Meets Initial Values (As Above)

Strength

Appearance No visual defects Step 1: -55ºC ± 2º 30 ± 3 minutes

Capacitance

Variation ≤ ±7.5% Step 2: Room Temp ≤ 3 minutes

Dissipation Meets Initial Values (As Above) Step 3: +125ºC ± 2º 30 ± 3 minutes

Thermal Factor

Shock Insulation Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes

Resistance

Dielectric Meets Initial Values (As Above) Repeat for 5 cycles and measure after

Strength 24 ± 2 hours at room temperature

Appearance No visual defects

Capacitance

Variation ≤ ±12.5%

Dissipation ≤ Initial Value x 2.0 (See Above)

Load Life Factor

Insulation ≥ Initial Value x 0.3 (See Above)

Resistance

Dielectric Meets Initial Values (As Above)

Strength

Appearance No visual defects

Capacitance

Variation ≤ ±12.5%

Load Dissipation ≤ Initial Value x 2.0 (See Above)

Humidity Factor

Insulation ≥ Initial Value x 0.3 (See Above)

Resistance

Dielectric Meets Initial Values (As Above)

Strength

Charge device with 1.5 rated voltage (≤ 10V) in

test chamber set at 125ºC ± 2ºC

for 1000 hours (+48, -0)

Remove from test chamber and stabilize

at room temperature for 24 ± 2 hours

before measuring.

Store in a test chamber set at 85ºC ± 2ºC/

85% ± 5% relative humidity for 1000 hours

(+48, -0) with rated voltage applied.

Remove from chamber and stabilize at

room temperature and humidity for

24 ± 2 hours before measuring.

1mm/sec

90 mm

X7R Dielectric

Capacitance Range

PREFERRED SIZES ARE SHADED

SIZE 0101* 0201 0402 0603 0805 1206

Soldering Reflow Only Reflow Only Reflow/Wave Reflow/Wave Reflow/Wave Reflow/Wave

Packaging

Paper/Embossed All Paper All Paper All Paper Paper/Embossed Paper/Embossed

(L) Length mm 0.40 ± 0.02 0.60 ± 0.03 1.00 ± 0.10 1.60 ± 0.15 2.01 ± 0.20 3.20 ± 0.20

(in.) (0.016 ± 0.0008) (0.024 ± 0.001) (0.040 ± 0.004) (0.063 ± 0.006) (0.079 ± 0.008) (0.126 ± 0.008)

(W) Width mm 0.20 ± 0.02 0.30 ± 0.03 0.50 ± 0.10 0.81 ± 0.15 1.25 ± 0.20 1.60 ± 0.20

(in.) (0.008 ± 0.0008) (0.011 ± 0.001) (0.020 ± 0.004) (0.032 ± 0.006) (0.049 ± 0.008) (0.063 ± 0.008)

(t) Terminal mm 0.20 ± 0.02 0.15 ± 0.05 0.25 ± 0.15 0.35 ± 0.15 0.50 ± 0.25 0.50 ± 0.25

(in.) (0.008 ± 0.0008) (0.006 ± 0.002) (0.010 ± 0.006) (0.014 ± 0.006) (0.020 ± 0.010) (0.020 ± 0.010)

WVDC 10 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 100 200 6.3 10 16 25 50 100 200 6.3 10 16 25 50 100 200 500

Cap 100 101 A A A A A C C G G G

(pF) 150 151 A A A A A C C G G G

220 221 A A A A A C C G G G

330 331 A A A A A C C G G G J J J J J J K

470 471 A A A A A C C G G G J J J J J J K

680 681 A A A A C C G G G J J J J J J K

1000 102 A A A A C C C G G G J J J J J J K

1500 152 A A C C C G G J J J J J J J J J J J J M

2200 222 A A C C C G G J J J J J J J J J J J J M

3300 332 A A C C C G G J J J J J J J J J J J J M

4700 472 A A C C C G G J J J J J J J J J J J J M

6800 682 A A C C C G G J J J J J J J J J J J J P

Cap 0.01 103 A A C C C G G G J J J J J J J J J J J J P

(μF) 0.015 153 C C C G G G J J J J J J J J J J J M

0.022 223 C C C G G G J J J J J N J J J J J M

0.033 333 C C C G G J J J J N J J J J J M

0.047 473 C C C G G G J J J J N J J J J J M

0.068 683 C C C G G G J J J J N J J J J J P

0.1 104 C C C G G G G J J J J N J J J J M P

0.15 154 GGGG JJJNN JJJJQ

0.22 224 GGJ J J JNNN J J J JQ

0.33 334 JJJJ NNNNN JJMPQ

0.47 474 J J J J NNNNN MMMPQ

0.68 684 JJJ NNN MMQQQ

1.0 105 C J J J J N N N N M M Q Q Q

2.2 225 J J PP PP QQQQQ

4.7 475 PP P QQQQ

10 106 PP QQQ

22 226 QQ

47 476

100 107

WVDC 10 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 100 200 6.3 10 16 25 50 100 200 6.3 10 16 25 50 100 200 500

SIZE 0101 0201 0402 0603 0805 1206

Letter ABCEGJKMNPQXYZ

Max. 0.33 0.22 0.56 0.71 0.90 0.94 1.02 1.27 1.40 1.52 1.78 2.29 2.54 2.79

Thickness (0.013) (0.009) (0.022) (0.028) (0.035) (0.037) (0.040) (0.050) (0.055) (0.060) (0.070) (0.090) (0.100) (0.110)

PAPER EMBOSSED

NOTE: Contact factory for non-specified capacitance values

*EIA 01005

X7R Dielectric

Capacitance Range

PREFERRED SIZES ARE SHADED

SIZE 1210 1812 1825 2220 2225

Soldering Reflow Only Reflow Only Reflow Only Reflow Only Reflow Only

Packaging Paper/Embossed All Embossed All Embossed All Embossed All Embossed

(L) Length mm 3.20 ± 0.20 4.50 ± 0.30 4.50 ± 0.30 5.70 ± 0.40 5.72 ± 0.25

(in.) (0.126 ± 0.008) (0.177 ± 0.012) (0.177 ± 0.012) (0.225 ± 0.016) (0.225 ± 0.010)

(W) Width mm 2.50 ± 0.20 3.20 ± 0.20 6.40 ± 0.40 5.00 ± 0.40 6.35 ± 0.25

(in.) (0.098 ± 0.008) (0.126 ± 0.008) (0.252 ± 0.016) (0.197 ± 0.016) (0.250 ± 0.010)

(t) Terminal mm 0.50 ± 0.25 0.61 ± 0.36 0.61 ± 0.36 0.64 ± 0.39 0.64 ± 0.39

(in.) (0.020 ± 0.010) (0.024 ± 0.014) (0.024 ± 0.014) (0.025 ± 0.015) (0.025 ± 0.015)

WVDC 10 16 25 50 100 200 500 16 25 50 100 200 500 50 100 200 25 50 100 200 500 50 100 200

Cap 100 101

(pF) 150 151

220 221

330 331

470 471

680 681

1000 102

1500 152 J J J J J J M

2200 222 J J J J J J M

3300 332 J J J J J J M

4700 472 J J J J J J M

6800 682 J J J J J J M

Cap 0.01 103 J J J J J J M K K K K K M M M X X X X M P P

(μF) 0.015 153 J J J J J J P K K K K P M M M X X X X M P P

0.022 223 J J J J J J Q K K K K P M M M X X X X M P P

0.033 333 J J J J J J Q K K K K X M M M X X X X M P P

0.047 473 J J J J J J Q K K K K Z M M M X X X X M P P

0.068 683 J J J J J M Q K K K K Z M M M X X X X M P P

0.1 104 J J J J J M K K K K Z M M M X X X X M P P

0.15 154 J J J J M Z K K K P Z M M M X X X X M P X

0.22 224 J J J J P Z K K K P M M M X X X X M P X

0.33 334 J J J J Q K K M X M M X X X X M P X

0.47 474 M M M M Q K K P M M X X X X M P X

0.68 684 M M P X X M M Q M P X X M P X

1.0 105 N N P X Z M M X Z M P X X M P X

1.5 155 N N Z Z Z Z Z Z M X X M X

2.2 225 X X Z Z Z Z Z Z X X M X

3.3 335 X X Z Z Z Z Z X Z

4.7 475 X X Z Z Z Z X Z

10 106 Z Z Z Z Z ZZ

22 226 Z Z Z Z

47 476 Z

100 107

WVDC 10 16 25 50 100 200 500 16 25 50 100 200 500 50 100 200 25 50 100 200 500 50 100 200

SIZE 1210 1812 1825 2220 2225

䉲

Letter ABCEGJKMNPQXYZ

Max. 0.33 0.22 0.56 0.71 0.90 0.94 1.02 1.27 1.40 1.52 1.78 2.29 2.54 2.79

Thickness (0.013) (0.009) (0.022) (0.028) (0.035) (0.037) (0.040) (0.050) (0.055) (0.060) (0.070) (0.090) (0.100) (0.110)

PAPER EMBOSSED

NOTE: Contact factory for non-specified capacitance values

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

AVX:

08055C393KAT2A 08055C393MAT2A 08055C561KAT2A 08055C561MAT2A 08055C562JAT2A

08055C562KAT2A 08055C562MAT2A 08055C563JAT2A 08055C563KAT2A 08055C563MAT2A 08055C681KAT2A

08055C681MAT2A 08055C682JAT2A 08055C682KAT2A 08055C682MAT2A 08055C683KAT2A

08055C683MAT2A 08055C821KAT2A 08055C821MAT2A 08055C822JAT2A 08055C822KAT2A 08055C823JAT2A

08055C823KAT2A 08055C823MAT2A 08055C101JAT2A 08055C101KAT2A 08055C102JAT2A 08055C102KAT2A

08055C102MAT2A 08055C103JAT2A 08055C103MAT2A 08055C105KAT2A 08055C122KAT2A

08055C123KAT2A 08055C123MAT2A 08055C151KAT2 08055C151KAT2A 08055C152MAT2A 0805YC474MA72A

0805YC474MAT2A 0805YC474MAT4A 0805YC561KAT2A 0805YC562KAT2A 0805YC562MAT2A

0805YC563KAT2A 0805YC563KAT4A 0805YC682KAT2A 0805YC683KAT2A 0805YC821KAT2A

0805YC821MAT2A 0805YC822KAT2A 0805YC822KAT4A 0805YC823KAT2A 0805ZC102KAT2A

0805ZC102MAT2A 0805ZC103KAT2A 0805ZC103MAT2A 0805ZC103MAT4A 0805ZC104KAT2A

0805ZC104MAT2A 0805ZC105JAT2A 0805ZC105JAT4A 0805ZC105KA72A 0805ZC105KAT2A 0805ZC105KAT4A

0805ZC105MAT2A 0805ZC105MAT4A 0805ZC124KAT2A 0805ZC153KAT2A 0805ZC153KAT4A

0805ZC154KAT2A 0805ZC154KAT4A 12061C102JAT2A 12061C102KAT2A 12061C102KAT4A 12061C102MAT2A

12061C102MAT4A 12061C103JAT2A 12061C103KAT2A 12061C103KAT4A 12061C103MAT2A

12061C103MAT4A 12061C104JAT2A 12061C104KAT2A 12061C104KAT4A 12061C104MAT2A 12061C104MAT4A

12061C122KAT2A 12061C122KAT4A 12061C123KAT2A 12061C123KAT4A 12061C152KAT2A

12061C152KAT4A 12061C152MAT2A 12061C153JAT2A 12061C153KAT2A 12061C153KAT4A 12061C182KAT2A

12061C183KAT2A 12061C183KAT4A