74LCX08FT
1
CMOS Digital Integrated Circuits Silicon Monolithic
74LCX08FT
74LCX08FT
74LCX08FT
74LCX08FT
Start of commercial production
2014-06
1.
1.
1.
1. Functional Description
Functional Description
Functional Description
Functional Description
• Low-Voltage Quad 2-Input AND Gate with 5-V Tolerant Inputs and Outputs
2.
2.
2.
2. General
General
General
General
The 74LCX08FT is a high-performance CMOS 2-input AND. Designed for use in 3.3 V systems, it achieves high-
speed operation while maintaining the CMOS low power dissipation.
The device is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5 V supply
environment for inputs.
All inputs are equipped with protection circuits against static discharge.
3.
3.
3.
3. Features
Features
Features
Features
(1) AEC-Q100 (Rev. H) (Note 1)
(2) Wide operating temperature range: Topr = -40 to 125
(3) Low-voltage operation: VCC = 1.65 to 3.6 V
(4) High-speed operation: tpd = 6.5 ns (max) (VCC = 3.3 ± 0.3 V)
(5) Output current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V)
(6) Power-down protection provided on all inputs and outputs
(7) Pin and function compatible with the 74 series
(74LVC/ALVC etc.) 08 type
Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales
representative.
4.
4.
4.
4. Packaging
Packaging
Packaging
Packaging
TSSOP14B
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
2
5.
5.
5.
5. Pin Assignment
Pin Assignment
Pin Assignment
Pin Assignment
6.
6.
6.
6. Marking
Marking
Marking
Marking
7.
7.
7.
7. IEC Logic Symbol
IEC Logic Symbol
IEC Logic Symbol
IEC Logic Symbol
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
3
8.
8.
8.
8. Truth Table
Truth Table
Truth Table
Truth Table
Inputs
A
L
L
H
H
Inputs
B
L
H
L
H
Outputs
Y
L
L
L
H
9.
9.
9.
9. Absolute Maximum Ratings (Note)
Absolute Maximum Ratings (Note)
Absolute Maximum Ratings (Note)
Absolute Maximum Ratings (Note)
Characteristics
Supply voltage
Input voltage
Output voltage
Input diode current
Output diode current
Output current
Power dissipation
VCC/ground current
Storage temperature
Symbol
VCC
VIN
VOUT
IIK
IOK
IOUT
PD
ICC/IGND
Tstg
Note
(Note 1)
(Note 2)
(Note 3)
(Note 4)
Rating
-0.5 to 6.5
-0.5 to 6.5
-0.5 to 6.5
-0.5 to VCC + 0.5
-50
±50
±50
180
±100
-65 to 150
Unit
V
V
V
mA
mA
mA
mW
mA
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VCC = 0 V
Note 2: High or low state. IOUT absolute maximum rating must be observed.
Note 3: VOUT < GND, VOUT > VCC
Note 4: 180 mW in the range of Ta = -40 to 85 . From Ta = 85 to 125 a derating factor of -3.25 mW/ shall be
applied until 50 mW.
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
4
10.
10.
10.
10. Operating Ranges (Note)
Operating Ranges (Note)
Operating Ranges (Note)
Operating Ranges (Note)
Characteristics
Supply voltage
Input voltage
Output voltage
Output current
Operating temperature
Input rise and fall times
Symbol
VCC
VIN
VOUT
IOH,IOL
Topr
dt/dv
Note
(Note 1)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 6)
Rating
1.65 to 3.6
1.5 to 3.6
0 to 5.5
0 to 5.5
0 to VCC
±24
±12
-40 to 125
0 to 10
Unit
V
V
V
mA
ns/V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: Data retention only
Note 2: VCC = 0 V
Note 3: High or low state
Note 4: VCC = 3.0 to 3.6 V
Note 5: VCC = 2.7 to 3.0 V
Note 6: VIN = 0.8 to 2.0 V, VCC = 3.0 V
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
5
11.
11.
11.
11. Electrical Characteristics
Electrical Characteristics
Electrical Characteristics
Electrical Characteristics
11.1.
11.1.
11.1.
11.1. DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, Ta
a
a
a = -40 to 85
= -40 to 85
= -40 to 85
= -40 to 85
)
)
)
)
Characteristics
High-level input voltage
Low-level input voltage
High-level output voltage
Low-level output voltage
Input leakage current
Power-OFF leakage current
Quiescent supply current
Quiescent supply current
Symbol
VIH
VIL
VOH
VOL
IIN
IOFF
ICC
∆ICC
Test Condition
VIN = VIH
VIN = VIH or VIL
VIN = 0 to 5.5 V
VIN/VOUT = 5.5 V
VIN = VCC or GND
VIN = 3.6 to 5.5 V
VIH = VCC - 0.6 V
(per 1 input)
IOH = -100 µA
IOH = -4 mA
IOH = -8 mA
IOH = -12 mA
IOH = -18 mA
IOH = -24 mA
IOL = 100 µA
IOL = 4 mA
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IOL = 24 mA
VCC (V)
1.65 to 2.3
2.3 to 2.7
2.7 to 3.6
1.65 to 2.3
2.3 to 2.7
2.7 to 3.6
1.65 to 3.6
1.65
2.3
2.7
3.0
3.0
1.65 to 3.6
1.65
2.3
2.7
3.0
3.0
1.65 to 3.6
0
1.65 to 3.6
1.65 to 3.6
2.7 to 3.6
Min
VCC × 0.9
1.7
2.0
VCC - 0.2
1.05
1.7
2.2
2.4
2.2
Max
VCC × 0.1
0.7
0.8
0.2
0.45
0.7
0.4
0.4
0.55
±5.0
10.0
10.0
±10.0
500
Unit
V
V
V
V
µA
µA
µA
µA
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
6
11.2.
11.2.
11.2.
11.2. DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, Ta
a
a
a = -40 to 125
= -40 to 125
= -40 to 125
= -40 to 125
)
)
)
)
Characteristics
High-level input voltage
Low-level input voltage
High-level output voltage
Low-level output voltage
Input leakage current
Power-OFF leakage current
Quiescent supply current
Quiescent supply current
Symbol
VIH
VIL
VOH
VOL
IIN
IOFF
ICC
∆ICC
Test Condition
VIN = VIH
VIN = VIH or VIL
VIN = 0 to 5.5 V
VIN/VOUT = 5.5 V
VIN = VCC or GND
VIN = 3.6 to 5.5 V
VIH = VCC - 0.6 V
(per 1 input)
IOH = -100 µA
IOH = -4 mA
IOH = -8 mA
IOH = -12 mA
IOH = -18 mA
IOH = -24 mA
IOL = 100 µA
IOL = 4 mA
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IOL = 24 mA
VCC (V)
1.65 to 2.3
2.3 to 2.7
2.7 to 3.6
1.65 to 2.3
2.3 to 2.7
2.7 to 3.6
1.65 to 3.6
1.65
2.3
2.7
3.0
3.0
1.65 to 3.6
1.65
2.3
2.7
3.0
3.0
1.65 to 3.6
0
1.65 to 3.6
1.65 to 3.6
2.7 to 3.6
Min
VCC × 0.9
1.7
2.0
VCC - 0.2
0.9
1.55
2.0
2.2
2.0
Max
VCC × 0.1
0.7
0.8
0.2
0.65
0.9
0.6
0.6
0.75
±20.0
40.0
40.0
±40.0
5.0
Unit
V
V
V
V
µA
µA
µA
mA
11.3.
11.3.
11.3.
11.3. AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, Ta
a
a
a = -40 to 85
= -40 to 85
= -40 to 85
= -40 to 85
)
)
)
)
Characteristics
Propagation delay time
Output skew
Symbol
tPLH,tPHL
tosLH,tosHL
Note
(Note 1)
Test Condition
See 11.7 AC Test Circuit,
Fig. 11.8.1, Table 11.8.1
VCC (V)
1.8 ± 0.15
2.5 ± 0.2
2.7
3.3 ± 0.3
2.7
3.3 ± 0.3
Min
1.5
1.5
Max
20.0
7.2
6.2
5.5
1.0
Unit
ns
ns
Note 1: Parameter guaranteed by design. (tosLH = |tPLHm-tPLHn|, tosHL = |tPHLm-tPHLn|)
11.4.
11.4.
11.4.
11.4. AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, Ta
a
a
a = -40 to 125
= -40 to 125
= -40 to 125
= -40 to 125
)
)
)
)
Characteristics
Propagation delay time
Output skew
Symbol
tPLH,tPHL
tosLH,tosHL
Note
(Note 1)
Test Condition
See 11.7 AC Test Circuit,
Fig. 11.8.1, Table 11.8.1
VCC (V)
1.8 ± 0.15
2.5 ± 0.2
2.7
3.3 ± 0.3
2.7
3.3 ± 0.3
Min
1.5
1.5
Max
22.0
8.0
7.0
6.5
1.0
Unit
ns
ns
Note 1: Parameter guaranteed by design. (tosLH = |tPLHm-tPLHn|, tosHL = |tPHLm-tPHLn|)
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
7
11.5.
11.5.
11.5.
11.5. Dynamic Switching Characteristics
Dynamic Switching Characteristics
Dynamic Switching Characteristics
Dynamic Switching Characteristics
(Unless otherwise specified,T
(Unless otherwise specified,T
(Unless otherwise specified,T
(Unless otherwise specified,Ta
a
a
a = 25
= 25
= 25
= 25
, Input: t
, Input: t
, Input: t
, Input: tr
r
r
r = t
= t
= t
= tf
f
f
f = 2.5 ns, C
= 2.5 ns, C
= 2.5 ns, C
= 2.5 ns, CL
L
L
L = 50 pF, R
= 50 pF, R
= 50 pF, R
= 50 pF, RL
L
L
L = 500
= 500
= 500
= 500
Ω
Ω
Ω
Ω)
)
)
)
Characteristics
Quiet output maximum dynamic VOL
Quiet output minimum dynamic VOL
Symbol
VOLP
|VOLV|
Test Condition
VIH = 3.3 V,VIL = 0 V
VIH = 3.3 V,VIL = 0 V
VCC (V)
3.3
3.3
Typ.
0.8
0.8
Unit
V
V
11.6.
11.6.
11.6.
11.6. Capacitive Characteristics (Unless otherwise specified, T
Capacitive Characteristics (Unless otherwise specified, T
Capacitive Characteristics (Unless otherwise specified, T
Capacitive Characteristics (Unless otherwise specified, Ta
a
a
a = 25
= 25
= 25
= 25
)
)
)
)
Characteristics
Input capacitance
Output capacitance
Power dissipation capacitance
Symbol
CIN
COUT
CPD
Note
(Note 1)
Test Condition
fIN =10 MHz
VCC (V)
3.3
0
3.3
Typ.
7
8
25
Unit
pF
pF
pF
Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current
consumption without load. Average operating current can be obtained by the equation.
ICC(opr) = CPD × VCC × fIN + ICC/4 (per 1 gate)
11.7.
11.7.
11.7.
11.7. AC Test Circuit
AC Test Circuit
AC Test Circuit
AC Test Circuit
11.8.
11.8.
11.8.
11.8. AC Waveform
AC Waveform
AC Waveform
AC Waveform
Fig.
Fig.
Fig.
Fig. 11.8.1
11.8.1
11.8.1
11.8.1 t
t
t
tPLH
PLH
PLH
PLH,t
,t
,t
,tPHL
PHL
PHL
PHL
Table
Table
Table
Table 11.8.1
11.8.1
11.8.1
11.8.1 AC Waveform Symbols
AC Waveform Symbols
AC Waveform Symbols
AC Waveform Symbols
Input
Output
Load
Symbol
VIH
VIM
tr, tf
VOM
CL
RL
VCC = 3.3 ± 0.3 V
VCC = 2.7 V
2.7 V
1.5 V
2.5 ns
1.5 V
50 pF
500 Ω
VCC = 2.5 ± 0.2 V
VCC
VCC/2
2.0 ns
VOH/2
30 pF
500 Ω
VCC = 1.8 ± 0.15 V
VCC
VCC/2
2.0 ns
VOH/2
30 pF
1 kΩ
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
8
Package Dimensions
Package Dimensions
Package Dimensions
Package Dimensions
Unit: mm
Weight: 0.054 g (typ.)
Package Name(s)
Nickname: TSSOP14B
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
74LCX08FT
9
RESTRICTIONS ON PRODUCT USE
RESTRICTIONS ON PRODUCT USE
RESTRICTIONS ON PRODUCT USE
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE").
("UNINTENDED USE").
("UNINTENDED USE").
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
IF YOU USE PRODUCT FOR
IF YOU USE PRODUCT FOR
IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
2016-09-13
Rev.4.0
©2016 Toshiba Corporation
