NETCONNECT es a ee Epoxy/Polish Termination Accessories and Epoxies Epoxy/Polish LC Termination Product Facts Accessories :. Supplement epoxy/polish tool kits on page 259 with these components to terminate LC Epoxy/Polish Connectors :, One of each of the first three components is required Description Part Number : - : ; LC Polishing Puck 1754074-1 : Different polishing films are required for LC polishing LC Cable Preparation Template 1588756-1 (see table on page 254 and films on page 261} = rere Tooland ie Set ey :. In addition to the Epoxy/Polish tool kits on the .25mm Ferrule Microscope Adapter 127 7- . . : LC Oven Block Assembly 14576281 previous page, these items are needed to terminate LC Epoxy/Polish Connectors EPO-TEK 353ND Epoxy Product Facts PART NUMBER 504035-1 :. For use with SC and LC Connectors . :. Pre-measured two-part packets for consistent results ~ Long pot life once mixed | Heat-cured epoxy : Supplied in 4-gram packets : Cures in 15 minutes at 115 C TRA-CON Epoxies Product Facts PART NUMBER 501195-4 . For use with SC, LC and ST Connectors : Pre-measured two-part packets for consistent results :: Can be heat-cured or cured at ambient temperature : Supplied in 2-gram packets : Each packet terminates 250 connectors : 25 packets per pack : Pot life = 30 minutes > Cures in: ~ 24 hours @ 25 C ~- 2 hours @ 65 C ~ 10 minutes @ 110C HYSOL Epoxy-Tubes Product Facts PART NUMBER 502418-1 : For use with SC, LC and ST Connectors | Two-part epoxy in two tubes : Heat-cured epoxy :. Terminates 400 connectors : One set of two (2) tubes per part number : Pot life = 30 minutes * Cures in 30 minutes at 100 C For more information, call 1-800-553-0938