59
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE) CARDBUS
560H SERIES
■FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4. for Cardbus
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• Connectors accept Type I, II, and III cards.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
– 55°C to + 85°C
DC 0.5 A
AC 250 V
40 mΩ max (6 VDC, 0.1 A)
1000 MΩ min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact type
Power, ground pins
Card detection pins
Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■MATERIALS
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
:
PPS resin
(for SMT and type III card connectors)
Copper alloy
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specification
Item
Insulating material
Conductor
Plating
560H Series Connector Conforming to Ver. 4
60
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
No. 1
No. 35
No. 34
No. 68
49.02 (1.930)
1.27 x (34-1)=41.91 (1.650)
1.27 (0.050)
1.27 (0.050)
0.6 (0.023)
4.7 (0.185)
7.6 (0.299)
4.08 (0.161) 7.32 (0.288)
2.1 (0.082)
56.6 (2.228)
49.5 (1.949)
0.635 x (68-1)=42.545 (1.675)
0.635 (0.025)
2.5 (0.098)
6.3 (0.248)
2.0 (0.079)
2.175 (0.086)
19
(0.748)
4.6 (0.181) 54.2 (2.133)
CARDBUS, CARD LOCK TYPE / SUPPORTS TYPE 1 ~ III CARD
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE ((
((
(WITH RIGHT-BUTTON EJECTOR, 2MM RAISED TYPE WITH FG CLIP))
))
)
■DIMENSIONS (3.3V CARD SUPPORT)
Part number: FCN-568P068-G/1594-4E
Detail of A portion
1.7
(0.067)
3.625
(0.142)
10.45
(0.411)
Detail of B portion
M2 nut
Plate
Product available with Non-
Locking Feature. Please
contact Factory for Details.
A
2 – M2 nut
When a card is locked
When a card is inserted
When a card is ejected
When no card is inserted
30.4
(1.197)
5.45 (0.214)
35
(1.378)
6.5
(0.256)
0.8
(0.031)
8.4
(0.331)
4
(0.157)
40.45
(1.593)
24.2(0.953)
59.8 (2.354)
1.78
(0.070)
59.8 (2.354)
2 – φ1 (0.039)
18 (0.709)
70.05
(2.757)
5.1
(0.201)
8.77
(0.345)
10.7
(0.421)
6.2
(0.244)
4.4
(0.173)
B
26.05
(1.043)
φ1(.0.39)
4.7 (0.185)
From bottom end
to center
5.08
(0.215)
5.08
(0.215)5.08
(0.215)
5.08
(0.215)
5.08
(0.215)
5.08
(0.215)
6.35
(0.250)
2±0.2(.309±.008)
7.85±0.4(.309±.015)
49.5(1.95)
5.2(0.205)
560H Series Connector Conforming to Ver. 4
61
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
CARDBUS, CARD LOCK TYPE / SUPPORTS TYPE 1 ~ III CARD
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE ((
((
(WITH RIGHT-BUTTON EJECTOR, 2MM RAISED TYPE WITH FG CLIP))
))
)
■PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
Part number: FCN-568P068-G/1594-4E
■RECOMMENDED DIMENSION
OF BODY (BUTTON AREA)
Note 1: Ground Pattern
Note 2: Pattern
Note 3: This drawing is for the type to be inseted on the front of the PC board,
and for the raised mounting type.
Note 4: In the area enclosed by a chenain double-dashed line, components with a 1.7mm
height can be mounted
Note 5: In the hatched area, component mounting is prohibited
Unit: mm (in.)
Unit: mm (in.)
■CARD LOCK METHOD
Push down the button
after inserting card Slide the pushed
down button to lock
5.55
±0.05
(0.219
±0.002
)
(Note 1)
R 2.5
(0.098)
22.1
–0.2
(0.870
–0.007
)
+0+0
Note 1: Use 6mm long screws,
screw torque is 2kg/cm
1.0
-0
(0.039
-0
)
5
-0
(0.197
-0
)
15.395
-0
(0.606
-0
)
66.45
±0.05
(2.616
±0.002
)
58.05
±0.1
(2.285
±0.004
)
4
±0.05
(0.157
±0.002
)
4.08
±0.05
(0.160
±0.002
)
59.8
±0.1
(2.354
±0.004
)
2-φ2.3
±0.1
)
(0.086
±0.004
)
0.635 x (68-1)=42.545 (1.675)
4.5 (0.177)
0.45
±0.05
(0.018
±0.002
)
7.9
±0.05
(0.311
±0.002
)
3.9
±0.05
(0.154
±0.002
)
49.5
±0.1
(1.949
±0.004
)
5.425
±0.1
(0.214
±0.004
)
4 (0.157)
φ1.04
+0.1
(0.041
+0.004
)
-0
-0
φ1.04
+0.1
(0.041
+0.004
)
-0
-0
Z
portion
Z
portion 49.02
±0.05
(1.930
±0.002
)
(Note 1)
No.34
No.68
No.35
No.1
Y
0.635
±0.05
(0.025
±0.002
)
Detail of Y portion
Detail of Z portion
0.635
±0.05
(0.025
±0.002
)
No. 2
No. 1
No. 36
No. 35
0.45
±0.05
(0.018
±0.002
)
0.5
(0.020)
1.04
+0.1
(0.041
+0.004
)
–0
–0
R 0.52
(0.020)
35.5
–0
(Note 4)30.9
–0
(Note 4)
R 2
–0
(Note
5)
45 (1.772)(Note 4)
54 (2.126)(Note 4)
5.425
±0.1
(0.214
±0.004
)
7.425
-0
(0.292
-0
)
(Note 5)
3.9
±0.05
(0.154
±0.002
)
7.9
±0.05
(0.311
±0.002
)
(Note 5)
4.8
-0
(0.188
–0
)
3.7
-0
(0.146
-0
)(Note 5)
53.9
±0.1
(2.335
±0.004
)
49.02
±0.05
(1.930
±0.002
)
4.08
±0.05
(0.160
±0.002
)
58.05
±0.1
(2.285
±0.004
)
59.8
±0.1
(2.354
±0.004
)
1.0
-0
(0.039
-0
)(Note 5)
70.8
-0
(2.768
-0
)(Note 4)
(Note 5)
3.95
–0
(0.156
–0
)
13.4
±0.1
(0.528
±0.004
)
3.25
-0
(0.128
-0
)(Note 5)
15.4
-0
(0.606
-0
)
(Note 5)
15.4
-0
(0.606
-0
)
(Note 4)
2.2
+0
(0.087
+0
)
(Note 4)
560H Series Connector Conforming to Ver. 4
62
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 03/2002
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email:marketing@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE
■HOW TO MOUNT COMPACT AND LIGHT WEIGHT MEMORY CARD CONNECTOR
●The main body and ejector card are separated in this memory card connector
MOUNTING 1)Mount (solder) only the connector main body. Reinforced metal fittings conform
to SMT specifications.
2)Place the ejector (guide) on the main body and lock it to the main body.
3)Secure the ejector (guide) from the back of the PC board using screws. By
tightening these screws, the FG teminals contact the frame ground to ground
the connector. (Screw torque is 2 kg/cm)
Button
Lock
FG terminal
Ground pattern
Reinforcing metal fitting
Main body
Ejector securing screw (M2)
