MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) CARDBUS 560H SERIES FEATURES * The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. for Cardbus * Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). * Plugs have an easy-to-use ejection mechanism. * Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. * Connectors accept Type I, II, and III cards. PIN CONNECTOR (PLUG) CONTACT LENGTH SPECIFICATIONS Specification Item Contact type Pin No. Contact length Operating temperature range - 55C to + 85C Power, ground pins 1, 17, 34, 35, 51, 68 Current rating DC 0.5 A Card detection pins 36, 67 3.5 mm (0.137 in.) Voltage rating AC 250 V Other signal pins Others 4.25 mm (0.167 in.) Contact resistance 40 m max (6 VDC, 0.1 A) Insulation resistance 1000 M min. (500 VDC) Dielectric withstanding voltage 500 VAC for 1 minute Insertion/withdrawal life Industrial environment: 5,000 times Office environment: 10,000 times 5.0 mm (0.196 in.) MATERIALS Specification Item Plug body: PPS resin UL94V-0 Insulating material : 6T nylon (for type III card connector) UL94V-0 Ejector: Polyester : PPS resin (for SMT and type III card connectors) Specifications subject to change Conductor Copper alloy Plating Contact: Gold over palladium over nickel (PAGOS) Terminal: Palladium Dimensions are in millimeters (inches) www.fcai.fujitsu.com 59 560H Series Connector Conforming to Ver. 4 CARDBUS, CARD LOCK TYPE / SUPPORTS TYPE 1 ~ III CARD RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, 2MM RAISED TYPE WITH FG CLIP)) DIMENSIONS (3.3V CARD SUPPORT) Part number: FCN-568P068-G/1594-4E 56.6 (2.228) 6.3 (0.248) 2.0 (0.079) 19 4.08 (0.161) 0.635 x (68-1)=42.545 (1.675) 2.5 (0.098) 0.635 (0.025) (0.748) 2.175 (0.086) 7.32 (0.288) 49.5 (1.949) 54.2 (2.133) 4.6 (0.181) No. 34 1.27 (0.050) No. 35 4.7 (0.185) 0.6 (0.023) 1.27 (0.050) No. 1 7.6 (0.299) 2.1 (0.082) No. 68 1.27 x (34-1)=41.91 (1.650) When a card is locked When a card is inserted When a card is ejected 5.1 (0.201) 40.45 (1.593) 2 - 1 (0.039) 59.8 (2.354) M2 nut 1.78 (0.070) A 10.7 (0.421) 59.8 (2.354) 24.2(0.953) Plate 5.45 (0.214) Detail of B portion 8.77 (0.345) 4.4 (0.173) 6.2 (0.244) 4.7 (0.185) From bottom end to center 8.4 (0.331) 4 (0.157) 2 - M2 nut Specifications subject to change 0.8 (0.031) 6.5 (0.256) 5.08 (0.215) 10.45 (0.411) Detail of A portion 5.08 (0.215) 5.08 (0.215) 18 (0.709) B 5.08 (0.215) 6.35 (0.250) 26.05 (1.043) 1(.0.39) 20.2(.309.008) 70.05 (2.757) 7.850.4(.309.015) 5.08 (0.215) 5.08 (0.215) When no card is inserted 3.625 (0.142) 5.2(0.205) 35 30.4 (1.378) (1.197) 49.5(1.95) 1.7 (0.067) 49.02 (1.930) Dimensions are in millimeters (inches) Product available with NonLocking Feature. Please contact Factory for Details. www.fcai.fujitsu.com 60 560H Series Connector Conforming to Ver. 4 CARDBUS, CARD LOCK TYPE / SUPPORTS TYPE 1 ~ III CARD RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, 2MM RAISED TYPE WITH FG CLIP)) PC BOARD MOUNTING PATTERN (MOUNTING SIDE) 0.5 (0.020) 52 0. 0) R .02 (0 No. 36 Detail of Z portion No. 35 Note 5: 2.2+0 (0.087+0) (Note 4) 7.425-0(0.292-0) (Note 5) 5.4250.1(0.2140.004) Ground Pattern Pattern This drawing is for the type to be inseted on the front of the PC board, and for the raised mounting type. In the area enclosed by a chenain double-dashed line, components with a 1.7mm height can be mounted In the hatched area, component mounting is prohibited 70.8-0 (2.768-0)(Note 4) 13.40.1(0.5280.004) (Note 5) 3.95-0(0.156-0) 59.8 0.1(2.3540.004) 3.25-0(0.128-0)(Note 5) 15.4-0 (0.606-0) (Note 4) 0.635 0.05 (0.0250.002) No. 2 49.020.05 (1.9300.002) 3.7-0(0.146-0)(Note 5) 53.90.1(2.3350.004) 15.4-0 (0.606-0) (Note 5) ) Detail of Y portion Note 4: 30.9-0 (Note 4) 35.5-0 (Note 4) R 2-0 (Note 5) 58.050.1(2.2850.004) 04 1.0-0 (0.039-0)(Note 5) 40.05 ) (0 Z portion +0.1 1.04 -0 15.395-0 (0.606-0) + -0 0.0 0.45 0.05 (0.0180.002) 4 .00 22 .08 .3 0. 6 0 1) 1 .0 .0 4 +0 41 -0 .1 (0 +0.004) (0.041-0 1.0-0 (0.039-0) 59.8 0.1(2.3540.004) (0.1570.002) (Note 1) 5-0 (0.197-0) 4.080.05 (0.1600.002) 49.02 0.05 (1.9300.002) No. 1 Note 1: Note 2: Note 3: 54 (2.126)(Note 4) 45 (1.772)(Note 4) 0.635 x (68-1)=42.545 (1.675) 4) 4.080.05 (0.1600.002) Z portion .1 +0 58.050.1(2.2850.004) 0.6350.05 (0.0250.002) -0 .00 .04 +00 1 041 . (0 66.450.05 (2.6160.002) No.35 7.90.05 (0.3110.002) No.34 3.90.05 (0.1540.002) Y (Note 5) 4.8-0(0.188-0) No.68 0.450.05 (0.0180.002) No.1 4 (0.157) 4.5 (0.177) 49.50.1(1.9490.004) 5.425 0.1 (0.2140.004) 3.90.05 (0.1540.002) 7.90.05 (0.3110.002) Part number: FCN-568P068-G/1594-4E Unit: mm (in.) RECOMMENDED DIMENSION CARD LOCK METHOD OF BODY (BUTTON AREA) +0 22.1-0.2 (Note 1) +0 (0.870 -0.007) 5.550.05 (0.2190.002) Push down the button after inserting card Slide the pushed down button to lock 5 2. 8) R .09 (0 Note 1: Use 6mm long screws, screw torque is 2kg/cm Specifications subject to change Unit: mm (in.) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 61 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE HOW TO MOUNT COMPACT AND LIGHT WEIGHT MEMORY CARD CONNECTOR The main body and ejector card are separated in this memory card connector MOUNTING 1) Mount (solder) only the connector main body. Reinforced metal fittings conform to SMT specifications. 2) Place the ejector (guide) on the main body and lock it to the main body. 3) Secure the ejector (guide) from the back of the PC board using screws. By tightening these screws, the FG teminals contact the frame ground to ground the connector. (Screw torque is 2 kg/cm) Button FG terminal Lock Ground pattern Main body Reinforcing metal fitting Ejector securing screw (M2) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email:marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 62