H100NA20X4 - Anaren Microwave, Inc.

USA/Canada:

Toll Free:

Europe:

(315) 432-8909

(800) 544-2414

+44 2392-232392

Model H100NA20X4

Features:

• RoHS Compliant

• 100 Watts

• DC - 2.7 GHz

• AlN Ceramic

• Non-Nichrome Resistive

Element

• Low VSWR

• 100% Tested

• Small Size

Flange Attenuator

100 Watts, 20 dB

Description

The H100NA20X4 is high performance Aluminum Nitride (AlN) high power

flange mount attenuator intended as a cost competitive alternative to

Beryllium Oxide (BeO). The termination is well suited to all cellular

frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The

high power handling makes the part ideal for terminating circulators, and

for use in power monitoring. The termination is also RoHS compliant!

General Specifications

Resistive Element Thick film

Substrate AlN Ceramic

Cover Alumina Ceramic

Mounting Flange Nickel Plated Copper

Operating Temperature -55 to +150°C (see de rating chart)

Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed

applicable portions of MIL-E-5400. All dimensions in inches.

Electrical Specifications

Attenuation Value: 20 dB, ± 1.0 dB, DC – 4.0GHz

Power: 100 Watts

Frequency Range: DC – 4.0 GHz

Return Loss > 24 dB to 2.7 GHz

> 20 dB to 4.0 GHz

Specification based on unit properly installed using suggested mounting instructions

and a 50 ohm nominal impedance. Specifications subject to change.

Outline Drawing

H100NA20X4 (097) rev.B pg. 1 of 2

ROHS

Compliant