Si823x Data Sheet 0.5 and 4.0 Amp ISOdrivers (2.5 and 5 kVRMS) The Si823x isolated driver family combines two independent, isolated drivers into a single package. The Si8230/1/3/4 are high-side/low-side drivers, while the Si8232/5/7/8 are dual drivers. Versions with peak output currents of 0.5 A (Si8230/1/2/7) and 4.0 A (Si8233/4/5/8) are available. All drivers operate with a maximum supply voltage of 24 V. The Si823x drivers utilize Silicon Labs' proprietary silicon isolation technology, which provides up to 5 kVRMS withstand voltage per UL1577 and fast 45 ns propagation times. Driver outputs can be grounded to the same or separate grounds or connected to a positive or negative voltage. The TTL level compatible inputs with >400 mV hysteresis are available in individual control input (Si8230/2/3/5/7/8) or PWM input (Si8231/4) configurations. High integration, low propagation delay, small installed size, flexibility, and costeffectiveness make the Si823x family ideal for a wide range of isolated MOSFET/IGBT gate drive applications. Automotive Grade is available for certain part numbers. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Industrial Applications * Power delivery systems * Motor control systems * Isolated dc-dc power supplies * Lighting control systems * Plasma displays * Solar and industrial inverters Automotive Applications * On-board chargers * Battery management systems * Charging stations * Traction inverters * Hybrid Electric Vehicles * Battery Electric Vehicles KEY FEATURES * Two completely isolated drivers in one package * Up to 5 kVRMS input-to-output isolation * Up to 1500 VDC peak driver-to-driver differential voltage * HS/LS and dual driver versions * Up to 8 MHz switching frequency * 0.5 A peak output (Si8230/1/2/7) * 4.0 A peak output (Si8233/4/5/8) * High electromagnetic immunity * RoHS-compliant packages: * SOIC-14/16 wide body * SOIC-16 narrow body * LGA-14 * QFN-14 (pin to pin compatible with LGA-14 packages) * AEC-Q100 qualification * Automotive-grade OPNs available * AIAG compliant PPAP documentation support * IMDS and CAMDS listing support Safety Regulatory Approvals * UL 1577 recognized * Up to 5000 VRMS for 1 minute * CSA component notice 5A approval * IEC 60950-1, 62368-1, 60601-1 (reinforced insulation) * VDE certification conformity * VDE 0884-10 * EN60950-1 (reinforced insulation) * CQC certification approval * GB4943.1 silabs.com | Building a more connected world. Rev. 2.15 Si823x Data Sheet Ordering Guide 1. Ordering Guide Industrial and Automotive Grade OPNs Industrial-grade devices (part numbers having an "-I" in their suffix) are built using well-controlled, high-quality manufacturing flows to ensure robustness and reliability. Qualifications are compliant with JEDEC, and defect reduction methodologies are used throughout definition, design, evaluation, qualification, and mass production steps. Automotive-grade devices (part numbers having an "-A" in their suffix) are built using automotive-specific flows at all steps in the manufacturing process to ensure robustness and low defectivity. These devices are supported with AIAG-compliant Production Part Approval Process (PPAP) documentation, and feature International Material Data System (IMDS) and China Automotive Material Data System (CAMDS) listing. Qualifications are compliant with AEC-Q100, and a zero-defect methodology is maintained throughout definition, design, evaluation, qualification, and mass production steps. Table 1.1. Si823x Ordering Guide 1, 2, 4 Ordering Part Number (OPN) Automotive OPN 5,6 Inputs Configuration Peak Current UVLO Voltage 0.5 A 8V Isolation Rating Package Type 2.5 kVrms SOIC-16 Wide Body 2.5 kVrms SOIC-16 Wide Body 2.5 kVrms SOIC-16 Narrow Body Wide Body (WB) Package Options Si8230BB-D-IS Si8230BB-AS VIA, VIB High Side/ Low Side Si8231BB-D-IS Si8231BB-AS PWM High Side/ Low Side Si8232BB-D-IS Si8232BB-AS VIA,VIB Dual Driver Si8234CB-D-IS Si8234CB-AS PWM High Side/ Low Side Si8233BB-D-IS Si8233BB-AS VIA,VIB High Side/ Low Side Si8234BB-D-IS Si8234BB-AS PWM High Side/ Low Side Si8235BB-D-IS Si8235BB-AS VIA,VIB Dual Driver Si8230AB-D-IS Si8230AB-AS VIA, VIB Si8231AB-D-IS Si8231AB-AS PWM High Side/ Low Side Si8232AB-D-IS Si8232AB-AS VIA,VIB Dual Driver Si8233AB-D-IS Si8233AB-AS VIA,VIB Si8234AB-D-IS Si8234AB-AS PWM High Side/ Low Side Si8235AB-D-IS Si8235AB-AS VIA,VIB Dual Driver 10 V 4.0 A 8V 0.5 A 5V 4.0 A 5V 0.5 A 8V Narrow Body (NB) Package Options Si8230BB-D-IS1 Si8230BB-AS1 VIA,VIB High Side/ Low Side Si8231BB-D-IS1 Si8231BB-AS1 PWM High Side/ Low Side Si8232BB-D-IS1 Si8232BB-AS1 VIA,VIB Dual Driver silabs.com | Building a more connected world. Rev. 2.15 | 2 Si823x Data Sheet Ordering Guide Ordering Part Number (OPN) Automotive OPN 5,6 Inputs Configuration Si8233BB-D-IS1 Si8233BB-AS1 VIA,VIB High Side/ Low Side Si8234BB-D-IS1 Si8234BB-AS1 PWM High Side/ Low Side Si8235BB-D-IS1 Si8235BB-AS1 VIA,VIB Dual Driver Si8235BA-D-IS1 Si8235BA-AS1 VIA,VIB Dual Driver Si8230AB-D-IS1 Si8230AB-AS1 VIA,VIB Si8231AB-D-IS1 Si8231AB-AS1 PWM High Side/ Low Side Si8232AB-D-IS1 Si8232AB-AS1 VIA,VIB Dual Driver Si8233AB-D-IS1 Si8233AB-AS1 VIA,VIB Si8234AB-D-IS1 Si8234AB-AS1 PWM High Side/ Low Side Si8235AB-D-IS1 Si8235AB-AS1 VIA,VIB Dual Driver Si8230BC-D-IS1 Si8230BC-AS1 VIA,VIB High Side/ Low Side Si8231BC-D-IS1 Si8231BC-AS1 PWM High Side/ Low Side Si8232BC-D-IS1 Si8232BC-AS1 VIA,VIB Dual Driver Si8233BC-D-IS1 Si8233BC-AS1 VIA,VIB High Side/ Low Side Si8234BC-D-IS1 Si8234BC-AS1 PWM High Side/ Low Side Si8235BC-D-IS1 Si8235BC-AS1 VIA,VIB Dual Driver Si8235BA-D-IS1 Si8235BA-AS1 VIA,VIB Dual Driver Si8230AC-D-IS1 Si8230AC-AS1 VIA,VIB Si8231AC-D-IS1 Si8231AC-AS1 PWM High Side/ Low Side Si8232AC-D-IS1 Si8232AC-AS1 VIA,VIB Dual Driver Si8233AC-D-IS1 Si8233AC-AS1 VIA,VIB Si8234AC-D-IS1 Si8234AC-AS1 PWM High Side/ Low Side Si8235AC-D-IS1 Si8235AC-AS1 VIA,VIB Dual Driver Peak Current UVLO Voltage 4.0 A 8V Isolation Rating 2.5 kVrms Package Type SOIC-16 Narrow Body 1.0 kVrms 0.5 A 5V 4.0 A 5V 0.5 A 8V 4.0 A 8V 2.5 kVrms SOIC-16 Narrow Body 3.75 kVrms SOIC-16 Narrow Body 3.75 kVrms SOIC-16 Narrow Body 1.0 kVrms 0.5 A 4.0 A 5V 3.75 kVrms SOIC-16 Narrow Body 2.5 kVrms LGA-14 5x5 mm 5V LGA Package Options Si8233CB-D-IM Si8233CB-AM Si8233BB-D-IM Si8233BB-AM Si8233AB-D-IM Si8233AB-AM Si8234BB-D-IM Si8234BB-AM Si8234AB-D-IM Si8234AB-AM Si8235BB-D-IM Si8235BB-AM Si8235AB-D-IM Si8235AB-AM 10 V 8V VIA,VIB High Side/ Low Side 4.0 A PWM VIA,VIB 5V 8V 5V Dual Driver 8V 5V QFN Package Options silabs.com | Building a more connected world. Rev. 2.15 | 3 Si823x Data Sheet Ordering Guide Ordering Part Number (OPN) Automotive OPN 5,6 Si8233AB-D-IM1 Si8233AB-AM1 Si8233BB-D-IM1 Si8233BB-AM1 Si8234AB-D-IM1 Si8234AB-AM1 Si8234BB-D-IM1 Si8234BB-AM1 Si8235AB-D-IM1 Si8235AB-AM1 Si8235BB-D-IM1 Si8235BB-AM1 Inputs Configuration Peak Current UVLO Voltage Isolation Rating Package Type 5V VIA,VIB 8V High Side/ Low Side PWM 4.0 A VIA,VIB Dual Driver 5V 8V 2.5 kVrms QFN-14 5V 8V 5 kV Ordering Options Si8230BD-D-IS Si8230BD-AS VIA, VIB High Side/ Low Side Si8231BD-D-IS Si8231BD-AS PWM High Side/ Low Side Si8232BD-D-IS Si8232BD-AS VIA, VIB Dual Driver Si8233BD-D-IS Si8233BD-AS VIA, VIB High Side/ Low Side Si8234BD-D-IS Si8234BD-AS PWM High Side/ Low Side Si8235BD-D-IS Si8235BD-AS VIA, VIB Dual Driver Si8230AD-D-IS Si8230AD-AS VIA, VIB Si8231AD-D-IS Si8231AD-AS PWM High Side/ Low Side Si8232AD-D-IS Si8232AD-AS VIA, VIB Dual Driver Si8233AD-D-IS Si8233AD-AS VIA, VIB Si8234AD-D-IS Si8234AD-AS PWM High Side/ Low Side Si8235AD-D-IS Si8235AD-AS VIA, VIB Dual Driver Si8230AD-D-IS3 Si8230AD-AS3 VIA, VIB Si8230BD-D-IS3 Si8230BD-AS3 VIA, VIB Si8233AD-D-IS3 Si8233AD-AS3 VIA, VIB Si8233BD-D-IS3 Si8233BD-AS3 VIA, VIB Si8235AD-D-IS3 Si8235AD-AS3 VIA, VIB Si8235BD-D-IS3 Si8235BD-AS3 VIA, VIB Si8237AB-D-IS1 Si8237AB-AS1 VIA, VIB Dual Driver Si8237BB-D-IS1 Si8237BB-AS1 VIA, VIB Dual Driver Si8238AB-D-IS1 Si8238AB-AS1 VIA, VIB Dual Driver Si8238BB-D-IS1 Si8238BB-AS1 VIA, VIB Dual Driver Si8237AC-D-IS1 Si8237AC-AS1 VIA, VIB Dual Driver Si8237BC-D-IS1 Si8237BC-AS1 VIA, VIB Dual Driver Si8238AC-D-IS1 Si8238AC-AS1 VIA, VIB Dual Driver Si8238BC-D-IS1 Si8238BC-AS1 VIA, VIB Dual Driver 0.5 A 8V 5.0 kVrms SOIC-16 Wide Body 4.0 A 0.5 A 5V SOIC-16 Wide Body 4.0 A 5V 5.0 kVrms 0.5 A High Side/ Low Side 8V SOIC-14 Wide Body with increased creepage 5V 4.0 A Dual Driver 8V 5V 8V 3 V VDDI Ordering Options silabs.com | Building a more connected world. 0.5 A 4.0 A 0.5 A 4.0 A 5V 8V 5V 2.5 kVrms SOIC-16 Narrow Body 3.75 kVrms SOIC-16 Narrow Body 8V 5V 8V 5V 8V Rev. 2.15 | 4 Si823x Data Sheet Ordering Guide Ordering Part Number (OPN) Automotive OPN 5,6 Inputs Configuration Peak Current Si8237AD-D-IS Si8237AD-AS VIA, VIB Dual Driver Si8237BD-D-IS Si8237BD-AS VIA, VIB Dual Driver Si8238AD-D-IS Si8238AD-AS VIA, VIB Dual Driver 5V Si8238BD-D-IS Si8238BD-AS VIA, VIB Dual Driver 8V Si8238AD-D-IS3 Si8238AD-AS3 VIA, VIB Dual Driver Si8238BD-D-IS3 Si8238BD-AS3 VIA, VIB Dual Driver 0.5 A 4.0 A UVLO Voltage Isolation Rating Package Type 5V 8V 5V 8V SOIC-16 Wide Body 5.0 kVrms SOIC-14 Wide Body with increased creepage 1. All packages are RoHS-compliant with peak reflow temperatures of 260 C according to the JEDEC industry standard classifications and peak solder temperatures. 2. "Si" and "SI" are used interchangeably. 3. An "R" at the end of the part number denotes tape and reel packaging option. 4. The temperature ranges is -40 to +125 C. 5. Automotive-Grade devices (with an "-A" suffix) are identical in construction materials, topside marking, and electrical parameters to their Industrial-Grade (with an "-I" suffix) version counterparts. Automotive-Grade products are produced utilizing full automotive process flows and additional statistical process controls throughout the manufacturing flow. The Automotive-Grade part number is included on shipping labels. 6. In the top markings of each device, the Manufacturing Code represented by either "RTTTTT" or "TTTTTT" contains as its first character a letter in the range N through Z to indicate Automotive-Grade. silabs.com | Building a more connected world. Rev. 2.15 | 5 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Ordering Guide 2. System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1 Top Level Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . .10 2.3 Typical Operating Characteristics (0.5 Amp) . . . . . . . . . . . . . . . . . . . .11 2.4 Typical Operating Characteristics (4.0 Amp) . . . . . . . . . . . . . . . . . . . .14 2.5 Family Overview and Logic Operation During Startup . 2.5.1 Products . . . . . . . . . . . . . . 2.5.2 Device Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 .16 .17 2.6 Power Supply Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .18 2.7 Power Dissipation Considerations . . . . . . . . . . . . . . . . . . . . . . .18 2.8 Layout Considerations . . . . . . . . . . . . . . . . . . . . . . . . .20 2.9 Undervoltage Lockout Operation . 2.9.1 Device Startup . . . . . 2.9.2 Undervoltage Lockout . . . 2.9.3 Undervoltage Lockout (UVLO) 2.9.4 Control Inputs . . . . . . 2.9.5 Disable Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 .20 .21 .21 .21 .21 2.10 Programmable Dead Time and Overlap Protection . . . . . . . . . . . . . . . . .22 3. Electrical Specifications 3.1 Test Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 . . . . . . . . . . . . . . . . . . . . . . . . . . .27 4. Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.1 High-Side/Low-Side Driver . . . . . . . . . . . . . . . . . . . . . . . . . .33 4.2 Dual Driver . . . . . . . . . . . . . . . . . . . . . . . . . .34 . 5. Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6. Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 6.1 Package Outline: 16-Pin Wide Body SOIC. . . . . . . . . . . . . . . . . . . . .41 6.2 Package Outline: 14-Pin Wide Body SOIC. . . . . . . . . . . . . . . . . . . . .43 6.3 Package Outline: 16-Pin Narrow Body SOIC . . . . . . . . . . . . . . . . . . . .45 6.4 Package Outline: 14 LD LGA (5 x 5 mm) . . . . . . . . . . . . . . . . . . . . .46 6.5 Package Outline: 14 LD QFN . . . . . . . . . . . . . . . . . . . . .47 7. Land Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 7.1 Land Pattern: 16-Pin Wide Body SOIC . . . . . . . . . . . . . . . . . . . . . .48 7.2 Land Pattern: 14-Pin Wide Body SOIC . . . . . . . . . . . . . . . . . . . . . .49 7.3 Land Pattern: 16-Pin Narrow Body SOIC . . . . . . . . . . . . . . . . . . . . .50 7.4 Land Pattern: 14 LD LGA/QFN . . . . . . . . . . . . . . . . . . . .51 silabs.com | Building a more connected world. . . . . Rev. 2.15 | 6 8. Top Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 8.1 Si823x Top Marking (14/16-Pin Wide Body SOIC) . . . . . . . . . . . . . . . . . .52 8.2 Si823x Top Marking (16-Pin Narrow Body SOIC) . . . . . . . . . . . . . . . . . .53 8.3 Si823x Top Marking (14 LD LGA/QFN) . . . . . . . . . . . . . . . . . . .54 9. Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 silabs.com | Building a more connected world. Rev. 2.15 | 7 Si823x Data Sheet System Overview 2. System Overview 2.1 Top Level Block Diagrams VDDI VDDA I S OL ATION VIA VOA UVLO GNDA DT CONTROL & OVERLAP PROTECTION DT VDDI VDDI VDDB UVLO DISABLE I S OL ATION VDDI VOB UVLO GNDB VIB GNDI Si8230/3 Figure 2.1. Si8230/3 Two-Input High-Side/Low-Side Isolated Drivers silabs.com | Building a more connected world. Rev. 2.15 | 8 Si823x Data Sheet System Overview VDDI VDDA I S OL ATION PWM LPWM VOA UVLO GNDA DT CONTROL & OVERLAP PROTECTION DT VDDI VDDI VDDB I S OL ATION VDDI UVLO DISABLE VOB UVLO GNDB LPWM GNDI Si8231/4 Figure 2.2. Si8231/4 Single-Input High-Side/Low-Side Isolated Drivers VDDI I S OL ATION VDDA VIA VOA UVLO GNDA VDDI VDDI DISABLE VDDI VDDB I S OL ATION UVLO VOB UVLO GNDB VIB GNDI Si8232/5/7/8 Figure 2.3. Si8232/5/7/8 Dual Isolated Drivers silabs.com | Building a more connected world. Rev. 2.15 | 9 Si823x Data Sheet System Overview 2.2 Functional Description The operation of an Si823x channel is analogous to that of an optocoupler and gate driver, except an RF carrier is modulated instead of light. This simple architecture provides a robust isolated data path and requires no special considerations or initialization at start-up. A simplified block diagram for a single Si823x channel is shown in the figure below. Transmitter Receiver Driver RF OSCILLATOR VDD A Dead time control MODULATOR SemiconductorBased Isolation Barrier B DEMODULATOR 0.5 to 4 A peak Gnd Figure 2.4. Simplified Channel Diagram A channel consists of an RF Transmitter and RF Receiver separated by a semiconductor-based isolation barrier. Referring to the Transmitter, input A modulates the carrier provided by an RF oscillator using on/off keying. The Receiver contains a demodulator that decodes the input state according to its RF energy content and applies the result to output B via the output driver. This RF on/off keying scheme is superior to pulse code schemes as it provides best-in-class noise immunity, low power consumption, and better immunity to magnetic fields. See the figure below for more details. Input Signal Modulation Signal Output Signal Figure 2.5. Modulation Scheme silabs.com | Building a more connected world. Rev. 2.15 | 10 Si823x Data Sheet System Overview 2.3 Typical Operating Characteristics (0.5 Amp) The typical performance characteristics depicted in Figure 2.6 Rise/Fall Time vs. Supply Voltage on page 11 through Figure 2.15 Output Source Current vs. Temperature on page 12 are for information purposes only. Refer to Table 3.1 Electrical Characteristics1 on page 24 for actual specification limits. 30 10 8 Propagation Delay (ns) Rise/Fall Time (ns) 25 Tfall 6 4 Trise H-L 20 L-H 15 2 25 C CL = 100 pF 25 C CL = 100 pF 0 10 9 12 15 18 VDDA Supply (V) 21 24 Figure 2.6. Rise/Fall Time vs. Supply Voltage 9 12 15 18 VDDA Supply (V) 21 24 Figure 2.7. Propagation Delay vs. Supply Voltage 50 40 45 35 Trise 40 Propagation Delay (ns) Rise/Fall Time (ns) 30 25 Tfall 20 15 10 L- H 35 30 H-L 25 20 15 5 VDD=12 V, 25 C VDD=12 V, 25C 10 0 0.0 0.5 1.0 Load (nF) 1.5 Figure 2.8. Rise/Fall Time vs. Load silabs.com | Building a more connected world. 2.0 0.0 0.5 1.0 Load (nF) 1.5 2.0 Figure 2.9. Propagation Delay vs. Load Rev. 2.15 | 11 Si823x Data Sheet System Overview 5 30 4 Supply Current (mA) Propagation Delay (ns) 25 L-H 20 H-L 3 VDDA = 15 V, f = 250 kHz, CL = 0 pF Duty Cycle = 50% 2 Channels Switching 2 15 VDD=12 V, Load = 200 pF 10 -45 -20 5 30 55 Temperature (C) 80 105 1 130 Figure 2.10. Propagation Delay vs. Temperature 3.5 100 kHz 1.5 50 kHz 1 14 19 130 1 MHz 4 500 kHz 3 100 kHz 2 50 kHz 1 0.5 9 105 5 500 kHz VDDA Supply Current (mA) VDDA Supply Current (mA) 30 55 80 Temperature ( C) Duty Cycle = 50% C L = 100 pF 1 Channel Switching 6 2 5 Figure 2.11. Supply Current vs. Temperature 1 MHz 2.5 0 -20 7 Duty Cycle = 50% CL = 0 pF 1 Channel Switching 3 -45 0 24 9 14 19 24 VDDA Supply Voltage (V) VDDA Supply Voltage (V) Figure 2.12. Supply Current vs. Supply Voltage Figure 2.13. Supply Current vs. Supply Voltage 500 425 400 450 Source Current (mA) Source Current (mA) 375 400 350 350 325 300 VDD=12 V, Vout=VDD -5 V 300 Vout=VDD -5 V 275 250 250 9 14 19 Supply Voltage (V) 24 Figure 2.14. Output Source Current vs. Supply Voltage silabs.com | Building a more connected world. -45 -20 5 30 55 Temperature (C) 80 105 130 Figure 2.15. Output Source Current vs. Temperature Rev. 2.15 | 12 Si823x Data Sheet System Overview 1125 900 1000 Sink Current (mA) Sink Current (mA) 800 875 750 700 600 VDD=12 V, Vout=5 V 625 Vout=5 V 500 500 9 14 19 24 Supply Voltage (V) Figure 2.16. Output Sink Current vs. Supply Voltage silabs.com | Building a more connected world. -45 -20 5 30 55 Temperature (C) 80 105 130 Figure 2.17. Output Sink Current vs. Temperature Rev. 2.15 | 13 Si823x Data Sheet System Overview 2.4 Typical Operating Characteristics (4.0 Amp) The typical performance characteristics depicted in Figure 2.18 Rise/Fall Time vs. Supply Voltage on page 14 through Figure 2.27 Output Source Current vs. Temperature on page 15 are for information purposes only. Refer to Table 3.1 Electrical Characteristics1 on page 24 for actual specification limits. 10 30 25 C CL = 100 pF 25C CL= 100 pF Propagation Delay (ns) Rise/Fall Time (ns) 8 Tfall 6 Trise 4 25 L- H 20 H -L 15 2 0 10 9 12 15 18 21 VDDA Supply (V) 24 Figure 2.18. Rise/Fall Time vs. Supply Voltage 9 15 18 21 VDDA Supply (V) 24 Figure 2.19. Propagation Delay vs. Supply Voltage 50 40 VDD=12V, 25C VDD=12V , 25 C H-L 40 Propagation Delay (ns) 30 Rise/Fall Time (ns) 12 Trise Tfall 20 10 L-H 30 20 0 10 0 2 4 6 Load (nF) 8 Figure 2.20. Rise/Fall Time vs. Load silabs.com | Building a more connected world. 10 0 2 4 Load (nF) 6 8 10 Figure 2.21. Propagation Delay vs. Load Rev. 2.15 | 14 Si823x Data Sheet System Overview 10 30 VDDA = 15V, f = 250kHz,CL= 0 pF Duty Cycle = 50% 2 Channels Switching VDD=12V, Load = 200pF Supply Current (mA) Propagation Delay (ns) 8 25 H-L L-H 20 15 4 2 0 10 -45 -20 5 30 55 80 Temperature ( C) 105 130 5 30 55 80 Duty Cycle = 50% CL = 100 pF 1 Channel Switching 14 VDDA Supply Current (mA) 12 1MHz 10 8 500kHz 6 -20 130 1MHz 12 10 8 500kHz 6 4 4 100kHz 100kHz 2 2 50 kHz 50 kHz 0 105 Figure 2.23. Supply Current vs. Temperature Duty Cycle = 50% CL = 0 pF 1 Channel Switching 14 -45 Temperature ( C) Figure 2.22. Propagation Delay vs. Temperature VDDA Supply Current (mA) 6 9 12 15 18 21 0 24 9 12 15 VDDA Supply Voltage (V) 18 21 24 VDDA Supply Voltage (V) Figure 2.24. Supply Current vs. Supply Voltage Figure 2.25. Supply Current vs. Supply Voltage 3.5 4 VDD=12V, Vout=VDD - 5V Vout=VDD -5V 3.75 3.25 Source Current (A) Source Current (A) 3.5 3.25 3 2.75 3 2.75 2.5 2.5 2.25 2.25 2 9 12 15 18 21 24 Supply Voltage (V) Figure 2.26. Output Source Current vs. Supply Voltage silabs.com | Building a more connected world. 2 -45 -20 5 30 55 Temperature ( C) 80 105 130 Figure 2.27. Output Source Current vs. Temperature Rev. 2.15 | 15 Si823x Data Sheet System Overview 7 9 VDD=12V, Vout=5V 6.75 Vout=5V 6.5 8 Sink Current (A) Sink Current (A) 6.25 7 6 5.75 5.5 5.25 6 5 4.75 5 4.5 4.25 4 9 12 15 18 21 24 4 -45 -20 5 30 55 80 105 130 Temperature (C) Supply Voltage (V) Figure 2.28. Output Sink Current vs. Supply Voltage Figure 2.29. Output Sink Current vs. Temperature 2.5 Family Overview and Logic Operation During Startup The Si823x family of isolated drivers consists of high-side, low-side, and dual driver configurations. 2.5.1 Products The table below shows the configuration and functional overview for each product in this family. Table 2.1. Si823x Family Overview Part Number Configuration Overlap Protection Programmable Dead Time Inputs Peak Output Current (A) Si8230 High-Side/Low-Side VIA, VIB 0.5 Si8231 High-Side/Low-Side PWM 0.5 Dual Driver -- -- VIA, VIB 0.5 Si8233 High-Side/Low-Side VIA, VIB 4.0 Si8234 High-Side/Low-Side PWM 4.0 Dual Driver -- -- VIA, VIB 4.0 Si8232/7 Si8235/8 silabs.com | Building a more connected world. Rev. 2.15 | 16 Si823x Data Sheet System Overview 2.5.2 Device Behavior The table below consists of truth tables for the Si8230/3, Si8231/4, and Si8232/5/7/8 families. Table 2.2. Si823x Family Truth Table1 Si8230/3 (High-Side/Low-Side) Truth Table Inputs VDDI State VIA VIB L L Powered L H H Disable Output Notes VOA VOB L L L Output transition occurs after internal dead time expires. Powered L L H Output transition occurs after internal dead time expires. L Powered L H L Output transition occurs after internal dead time expires. H H Powered L L L Invalid state. Output transition occurs after internal dead time expires. X2 X2 Unpowered X L L Output returns to input state within 7 s of VDDI power restoration. X X Powered H L L Device is disabled. Si8231/4 (PWM Input High-Side/Low-Side) Truth Table PWM Input VDDI State Disable Output Notes VOA VOB H Powered L H L Output transition occurs after internal dead time expires. L Powered L L H Output transition occurs after internal dead time expires. X2 Unpowered X L L Output returns to input state within 7 s of VDDI power restoration. X Powered H L L Device is disabled. Si8232/5/7/8 (Dual Driver) Truth Table Inputs VDDI State VIA VIB L L Powered L H H Disable Output Notes VOA VOB L L L Output transition occurs immediately (no internal dead time). Powered L L H Output transition occurs immediately (no internal dead time). L Powered L H L Output transition occurs immediately (no internal dead time). H H Powered L H H Output transition occurs immediately (no internal dead time). X2 X2 Unpowered X L L Output returns to input state within 7 s of VDDI power restoration. X X Powered H L L Device is disabled. Notes: 1. This truth table assumes VDDA and VDDB are powered. If VDDA and VDDB are below UVLO, see 2.9 Undervoltage Lockout Operation for more information. 2. Note that an input can power the input die through an internal diode if its source has adequate current. silabs.com | Building a more connected world. Rev. 2.15 | 17 Si823x Data Sheet System Overview 2.6 Power Supply Connections Isolation requirements mandate individual supplies for VDDI, VDDA, and VDDB. The decoupling caps for these supplies must be placed as close to the VDD and GND pins of the Si823x as possible. The optimum values for these capacitors depend on load current and the distance between the chip and the regulator that powers it. Low effective series resistance (ESR) capacitors, such as Tantalum, are recommended. 2.7 Power Dissipation Considerations Proper system design must assure that the Si823x operates within safe thermal limits across the entire load range.The Si823x total power dissipation is the sum of the power dissipated by bias supply current, internal parasitic switching losses, and power dissipated by the series gate resistor and load. Equation 1 shows total Si823x power dissipation. ( )( )( ) ( )( )( ) RP RN PD = (VDDI)(IDDI) + 2(IDD2)(VDD2) + f QG VDD2 + f QG VDD2 + 2fCintVDD22 RP + RG RN + RG where: PD is the total Si823x device power dissipation (W) IDDI is the input-side maximum bias current (3 mA) IDD2 is the driver die maximum bias current (2.5 mA) Cint is the internal parasitic capacitance (75 pF for the 0.5 A driver and 370 pF for the 4.0 A driver) VDDI is the input-side VDD supply voltage (2.7 to 5.5 V) VDD2 is the driver-side supply voltage (10 to 24 V) f is the switching frequency (Hz) QG is the gate charge of the FET being driven RG is the external gate resistor RP is the RDS(ON) of the driver pull-up switch: (Rp = 15 for the 0.5 A driver; Rp = 2.7 for the 4.0 A driver) RN is the RDS(ON) of the driver pull-down switch: (Rn = 5 for the 0.5 A driver and 1 for the 4.0 A driver) Equation 1 Power dissipation example for 0.5 A driver using Equation 1 with the following givens: VDD1 = 5.0 V VDD2 = 12 V f = 350 kHz RG = 22 QG = 25 nC ( )( 5 +522 ) + (350 x 103)(25 x 10-9)(12)( 1515+ 22 ) Pd = 0.015 + 0.060 + (350 x 103)(25 x 10-9) 12 +2 (350 x 103)(75 x 10-12)(144) = 145 mW silabs.com | Building a more connected world. Rev. 2.15 | 18 Si823x Data Sheet System Overview From which the driver junction temperature is calculated using Equation 2, where: Pd is the total Si823x device power dissipation (W) ja is the thermal resistance from junction to air (105 C/W in this example) TA is the ambient temperature T j = Pd x ja x T A = (0.145)(105) + 20 = 35.2 C The maximum power dissipation allowable for the Si823x is a function of the package thermal resistance, ambient temperature, and maximum allowable junction temperature, as shown in Equation 2: PDmax Tjmax - TA ja where: PDmax = Maximum Si823x power dissipation (W) Tjmax = Si823x maximum junction temperature (150 C) TA = Ambient temperature (20 C) ja = Si823x junction-to-air thermal resistance (105 C/W) Equation 2 Substituting values for PDmax Tjmax, TA, and ja into Equation 2 results in a maximum allowable total power dissipation of 1.29 W. Maximum allowable load is found by substituting this limit and the appropriate data sheet values from Table 3.1 Electrical Characteristics1 on page 24 into Equation 1 and simplifying. The result is Equation 3 (0.5 A driver) and Equation 4 (4.0 A driver), both of which assume VDDI = 5 V and VDDA = VDDB = 18 V. QG(MAX) = 0.164 - 3.05 x 10-9 f Equation 3 QG(MAX) = 0.634 - 5.81 x 10-9 f Equation 4 Equation 3 and Equation 4 are graphed in the figure below, where the points along the load line represent the package dissipationlimited value of CL for the corresponding switching frequency. silabs.com | Building a more connected world. Rev. 2.15 | 19 Si823x Data Sheet System Overview 2.8 Layout Considerations It is most important to minimize ringing in the drive path and noise on the Si823x VDD lines. Care must be taken to minimize parasitic inductance in these paths by locating the Si823x as close to the device it is driving as possible. In addition, the VDD supply and ground trace paths must be kept short. For this reason, the use of power and ground planes is highly recommended. A split ground plane system having separate ground and VDD planes for power devices and small signal components provides the best overall noise performance. 2.9 Undervoltage Lockout Operation Device behavior during start-up, normal operation and shutdown is shown in Figure 2.30 Device Behavior during Normal Operation and Shutdown on page 21, where UVLO+ and UVLO- are the positive-going and negative-going thresholds respectively. Note that outputs VOA and VOB default low when input side power supply (VDDI) is not present. 2.9.1 Device Startup Outputs VOA and VOB are held low during power-up until VDD is above the UVLO threshold for time period tSTART. Following this, the outputs follow the states of inputs VIA and VIB. silabs.com | Building a more connected world. Rev. 2.15 | 20 Si823x Data Sheet System Overview 2.9.2 Undervoltage Lockout Undervoltage Lockout (UVLO) is provided to prevent erroneous operation during device startup and shutdown or when VDD is below its specified operating circuits range. The input (control) side, Driver A and Driver B, each have their own undervoltage lockout monitors. The Si823x input side enters UVLO when VDDI < VDDIUV-, and exits UVLO when VDDI > VDDIUV+. The driver outputs, VOA and VOB, remain low when the input side of the Si823x is in UVLO and their respective VDD supply (VDDA, VDDB) is within tolerance. Each driver output can enter or exit UVLO independently. For example, VOA unconditionally enters UVLO when VDDA falls below VDDAUV- and exits UVLO when VDDA rises above VDDAUV+. UVLO+ UVLO- VDDHYS VDDI UVLO+ UVLO- VDDHYS VDDA VIA DISABLE tSTART tSD tSTART tSTART tSD tRESTART tPHL tPLH VOA Figure 2.30. Device Behavior during Normal Operation and Shutdown 2.9.3 Undervoltage Lockout (UVLO) The UVLO circuit unconditionally drives VO low when VDD is below the lockout threshold. Upon power up, the Si823x is maintained in UVLO until VDD rises above VDDUV+. During power down, the Si823x enters UVLO when VDD falls below the UVLO threshold plus hysteresis (i.e., VDD < VDDUV+ - VDDHYS). 2.9.4 Control Inputs VIA, VIB, and PWM inputs are high-true, TTL level-compatible logic inputs. A logic high signal on VIA or VIB causes the corresponding output to go high. For PWM input versions (Si8231/4), VOA is high and VOB is low when the PWM input is high, and VOA is low and VOB is high when the PWM input is low. 2.9.5 Disable Input When brought high, the DISABLE input unconditionally drives VOA and VOB low regardless of the states of VIA and VIB. Device operation terminates within tSD after DISABLE =VIH and resumes within tRESTART after DISABLE = VIL. The DISABLE input has no effect if VDDI is below its UVLO level (i.e., VOA, VOB remain low). silabs.com | Building a more connected world. Rev. 2.15 | 21 Si823x Data Sheet System Overview 2.10 Programmable Dead Time and Overlap Protection All high-side/low-side drivers (Si8230/1/3/4) include programmable overlap protection to prevent outputs VOA and VOB from being high at the same time. These devices also include programmable dead time, which adds a user-programmable delay between transitions of VOA and VOB. When enabled, dead time is present on all transitions, even after overlap recovery. The amount of dead time delay (DT) is programmed by a single resistor (RDT) connected from the DT input to ground per Equation 5. Note that the dead time pin can be tied to VDDI or left floating to provide a nominal dead time at approximately 400 ps. DT 10 x RDT where: DT = dead time (ns) and RDT = dead time programing resistor (k) Equation 5 The device driving VIA and VIB should provide a minimum dead time of TDD to avoid activating overlap protection. Input/output timing waveforms for the two-input drivers are shown in Figure 2.31 Input / Output Waveforms for High-Side / Low-Side Two-Input Drivers on page 22, and dead time waveforms are shown in Figure 2.32 Dead Time Waveforms for High-Side / Low-Side Two-input Drivers on page 23. Figure 2.31. Input / Output Waveforms for High-Side / Low-Side Two-Input Drivers silabs.com | Building a more connected world. Rev. 2.15 | 22 Si823x Data Sheet System Overview OVERLAP OVERLAP VOB VIA/ PWM VIB 50% VIB VIA/ PWM DT DT DT DT 90% VOA VOA 10% 90% DT DT VOB 10% A. Typical Dead Time Operation VOB B. Dead Time Operation During Overlap Figure 2.32. Dead Time Waveforms for High-Side / Low-Side Two-input Drivers silabs.com | Building a more connected world. Rev. 2.15 | 23 Si823x Data Sheet Electrical Specifications 3. Electrical Specifications Table 3.1. Electrical Characteristics1 2.7 V < VDDI < 5.5 V, VDDA = VDDB = 12 V or 15 V, TA = -40 to +125 C, Typical specs at 25 C, TJ = -40 to +150 C Parameter Symbol Test Condition Min Typ Max Unit VDDI Si8230/1/2/3/4/5 4.5 -- 5.5 V Si8237/8 2.7 -- 5.5 VDDA, VDDB Voltage between VDDA and GNDA, and VDDB and GNDB (See 1. Ordering Guide) 6.5 -- 24 V IDDI(Q) Si8230/2/3/5/7/8 -- 2 3 mA Si8231/4 -- 3.5 5 mA IDDA(Q), IDDB(Q) Current per channel -- -- 3.0 mA Input Supply Active Current IDDI Input freq = 500 kHz, no load -- 3.5 -- mA Output Supply Active Current IDDA Current per channel with -- 6 -- mA IDDB Input freq = 500 kHz, no load DC Specifications Input-side Power Supply Voltage Driver Supply Voltage Input Supply Quiescent Current Output Supply Quiescent Current Input Pin Leakage Current IVIA, IVIB, IPWM -10 -- +10 A dc Input Pin Leakage Current (Si8230/1/2/3/4/5) IDISABLE -10 -- +10 A dc -1000 -- +1000 Input Pin Leakage Current (Si8237/8) Logic High Input Threshold VIH 2.0 -- -- V Logic Low Input Threshold VIL -- -- 0.8 V Input Hysteresis VIHYST Si8230/1/2/3/4/5/7/8 400 450 -- mV Logic High Output Voltage VOAH, VOBH IOA, IOB = -1 mA (VDDA / VDDB) -- 0.04 -- -- V Logic Low Output Voltage VOAL, VOBL IOA, IOB = 1 mA -- -- 0.04 V IOA(SCL), IOB(SCL) Si8230/1/2/7, Figure 3.1 IOL Sink Current Test Circuit on page 27 -- 0.5 -- A Si8233/4/5/8, Figure 3.1 IOL Sink Current Test Circuit on page 27 -- 4.0 -- A Si8230/1/2/7, Figure 3.2 IOH Source Current Test Circuit on page 27 -- 0.25 -- A Si8233/4/5/8, Figure 3.2 IOH Source Current Test Circuit on page 27 -- 2.0 -- A Output Short-Circuit Pulsed Sink Current Output Short-Circuit Pulsed Source Current IOA(SCH), IOB(SCH) silabs.com | Building a more connected world. Rev. 2.15 | 24 Si823x Data Sheet Electrical Specifications Parameter Output Sink Resistance Output Source Resistance Symbol Test Condition Min Typ Max Unit RON(SINK) Si8230/1/2/7 -- 5.0 -- Si8233/4/5/8 -- 1.0 -- Si8230/1/2/7 -- 15 -- Si8233/4/5/8 -- 2.7 -- RON(SOURCE) VDDI Undervoltage Threshold VDDIUV+ VDDI rising (Si8230/1/2/3/4/5) 3.60 4.0 4.45 V VDDI Undervoltage Threshold VDDIUV- VDDI falling 3.30 3.70 4.15 V (Si8230/1/2/3/4/5) VDDI Lockout Hysteresis VDDIHYS (Si8230/1/2/3/4/5) -- 250 -- mV VDDI Undervoltage Threshold VDDIUV+ VDDI rising (Si8237/8) 2.15 2.3 2.5 V VDDI Undervoltage Threshold VDDIUV- VDDI falling (Si8237/8) 2.10 2.22 2.40 V VDDI Lockout Hysteresis VDDIHYS (Si8237/8) -- 75 -- mV VDDAUV+, VDDBUV+ VDDA, VDDB rising 5 V Threshold 5.20 5.80 6.30 V 8 V Threshold 7.50 8.60 9.40 V 10 V Threshold 9.60 11.1 12.2 V 12.5 V Threshold 12.4 13.8 14.8 V 5 V Threshold 4.90 5.52 6.0 V 8 V Threshold 7.20 8.10 8.70 V 10 V Threshold 9.40 10.1 10.9 V 12.5 V Threshold 11.6 12.8 13.8 V VDDA, VDDB Undervoltage Threshold VDDA, VDDB Undervoltage Threshold VDDAUV-, VDDBUV- VDDA, VDDB falling VDDA, VDDB Lockout Hysteresis VDDAHYS, VDDBHYS UVLO voltage = 5 V -- 280 -- mV VDDA, VDDB Lockout Hysteresis VDDAHYS, VDDBHYS UVLO voltage = 8 V -- 600 -- mV VDDA, VDDB Lockout Hysteresis VDDAHYS, VDDBHYS UVLO voltage = 10 V or 12.5 V -- 1000 -- mV -- 10 -- ns -- 30 45 ns -- -- 5.60 ns -- 0.4 -- ns AC Specifications Minimum Pulse Width Propagation Delay tPHL, tPLH Pulse Width Distortion |tPLH - tPHL| PWD Minimum Overlap Time2 TDD silabs.com | Building a more connected world. CL = 200 pF DT = VDDI, No-Connect Rev. 2.15 | 25 Si823x Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit DT Figure 2.32 Dead Time Waveforms for High-Side / Low-Side Two-input Drivers on page 23, RDT = 100 k 730 900 1170 ns Figure 2.32 Dead Time Waveforms for High-Side / Low-Side Two-input Drivers on page 23, RDT = 6 k 55 70 75 ns CL = 200 pF (Si8230/1/2/7) -- -- 20 ns CL = 200 pF (Si8233/4/5/8) -- -- 12 ns tSD -- -- 60 ns tRESTART -- -- 60 ns Programmed Dead Time3 Output Rise and Fall Time tR,tF Shutdown Time from Disable True Restart Time from Disable False Device Start-up Time tSTART Time from VDD_ = VDD_UV+ to VOA, VOB = VIA, VIB -- -- 40 s Common Mode CMTI VIA, VIB, PWM = VDDI or 0 V 20 45 -- kV/s Transient Immunity VCM = 1500 V (see Figure 3.3 Common Mode Transient Immunity Test Circuit on page 28) Notes: 1. VDDA = VDDB = 12 V for 5, 8, and 10 V UVLO devices; VDDA = VDDB = 15 V for 12.5 V UVLO devices. 2. TDD is the minimum overlap time without triggering overlap protection (Si8230/1/3/4 only). 3. The largest RDT resistor that can be used is 220 k. silabs.com | Building a more connected world. Rev. 2.15 | 26 Si823x Data Sheet Electrical Specifications 3.1 Test Circuits Figures Figure 3.1 IOL Sink Current Test Circuit on page 27, Figure 3.2 IOH Source Current Test Circuit on page 27, and Figure 3.3 Common Mode Transient Immunity Test Circuit on page 28 depict sink current, source current, and common-mode transient immunity test circuits, respectively. VDDA = VDDB = 15 V VDDI VDD IN INPUT Si823x 10 OUT SCHOTTKY VSS 1 F 1 F CER Measure 100 F 8V + _ 10 F EL RSNS 0.1 50 ns VDDI GND 200 ns INPUT WAVEFORM Figure 3.1. IOL Sink Current Test Circuit VDDA = VDDB = 15 V VDDI VDD IN INPUT Si823x 10 OUT SCHOTTKY VSS 1 F 1 F CER Measure 100 F 5.5 V + _ 10 F EL RSNS 0.1 50 ns VDDI GND 200 ns INPUT WAVEFORM Figure 3.2. IOH Source Current Test Circuit silabs.com | Building a more connected world. Rev. 2.15 | 27 Si823x Data Sheet Electrical Specifications 12 V Supply Si823x Input Signal Switch 5V Isolated Supply VDDI VDDA INPUT VOA DISABLE DT GNDA VDDB Oscilloscope VOB 100k GNDI GNDB Isolated Ground Input High Voltage Differential Probe Output Vcm Surge Output High Voltage Surge Generator Figure 3.3. Common Mode Transient Immunity Test Circuit Table 3.2. Regulatory Information1 CSA The Si823x is certified under CSA Component Acceptance Notice 5A. For more details, see Master Contract Number 232873. 60950-1, 62368-1: Up to 600 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage. 60601-1: Up to 250 VRMS working voltage and 2 MOPP (Means of Patient Protection). VDE The Si823x is certified according to VDE 0884-10 and EN 60950-1. For more details, see certificates 40018443, 40030763. 0884-10: Up to 891 Vpeak for basic insulation working voltage. 60950-1: Up to 600 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage. UL The Si823x is certified under UL1577 component recognition program. For more details, see File E257455. Rated up to 5000 VRMS isolation voltage for basic protection. CQC The Si823x is certified under GB4943.1-2011. For more details, see certificates CQC13001096106, CQC13001096108, and CQC 17001178087. Rated up to 600 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage. silabs.com | Building a more connected world. Rev. 2.15 | 28 Si823x Data Sheet Electrical Specifications Note: 1. Regulatory Certifications apply to 2.5 kVRMS rated devices which are production tested to 3.0 kVRMS for 1 sec. Regulatory Certifications apply to 3.75 kVRMS rated devices which are production tested to 4.5 kVRMS for 1 sec. Regulatory Certifications apply to 5.0 kVRMS rated devices which are production tested to 6.0 kVRMS for 1 sec. For more information, see 1. Ordering Guide. Table 3.3. Insulation and Safety-Related Specifications Value Parameter Symbol Test Condition WBSOIC-14/16 5 kVRMS WBSOIC-14/16 NBSOIC-16 2.5 kVRMS/ 3.75 kVRMS 14 LD LGA /QFN 2.5 kVRMS Unit Nominal External Air Gap (Clearance)1 CLR 8.0 8.0/4.01 3.5 mm Nominal External Tracking (Creepage)1 CPG 8.0 8.0/4.01 3.5 mm Minimum Internal Gap DTI 0.014 0.014 0.014 mm 600 600 600 V (Internal Clearance) Tracking Resistance CTI or PTI IEC60112 Erosion Depth ED 0.019/0.122 0.019/0.122 0.021 mm Resistance (Input-Output)2 RIO 1012 1012 1012 Capacitance (Input-Output)2 CIO 1.4 1.4 1.4 pF 4.0 4.0 4.0 pF Input Capacitance3 CI f = 1 z Notes: 1. The values in this table correspond to the nominal creepage and clearance values as detailed in 6.1 Package Outline: 16-Pin Wide Body SOIC, 6.2 Package Outline: 14-Pin Wide Body SOIC, 6.3 Package Outline: 16-Pin Narrow Body SOIC, 6.4 Package Outline: 14 LD LGA (5 x 5 mm), 6.5 Package Outline: 14 LD QFN. VDE certifies the clearance and creepage limits as 4.7 mm minimum for the NB SOIC and 8.5 mm minimum for the WB SOIC package. UL does not impose a clearance and creepage minimum for component level certifications. CSA certifies the clearance and creepage of the WB SOIC package with designation "IS3" as 8 mm minimum. CSA certifies the clearance and creepage limits as 3.9 mm minimum for the NB SOIC and 7.6 mm minimum for the WB SOIC package with package designation "IS" as listed in the data sheet. 2. To determine resistance and capacitance, the Si823x is converted into a 2-terminal device. Pins 1-8 (1-7, 14 LD LGA/QFN) are shorted together to form the first terminal and pins 9-16 (8-14, 14 LD LGA/QFN) are shorted together to form the second terminal. The parameters are then measured between these two terminals. 3. Measured from input pin to ground. silabs.com | Building a more connected world. Rev. 2.15 | 29 Si823x Data Sheet Electrical Specifications Table 3.4. IEC 60664-1 Ratings Parameter Test Condition Specification WB SOIC-14/16 NB SOIC-16 14 LD LGA/QFN Basic Isolation Group Material Group I I I Installation Classification Rated Mains Voltages < 150 VRMS I-IV I-IV I-IV Rated Mains Voltages < 300 VRMS I-IV I-III I-III Rated Mains Voltages < 400 VRMS I-III I-II I-II Rated Mains Voltages < 600 VRMS I-III I-II I-II Table 3.5. VDE 0884-10 Insulation Characteristics1 Characteristic Parameter Symbol Maximum Working Insulation Voltage VIORM Test Condition Input to Output Test Voltage VPR Method b1 (VIORM x 1.875 = VPR, 100% Production Test, tm = 1 sec, Partial Discharge < 5 pC) Transient Overvoltage VIOTM t = 60 s Surge Voltage VIOSM Insulation Resistance at TS, VIO = 500 V RS NB SOIC-16 14 LD LGA/QFN Unit 891 560 V peak 1671 1050 V peak 6000 4000 V peak 3077 3077 V peak 2 2 >109 >109 Tested per IEC 60065 with surge voltage of 1.2 s/50 s Si823xxB/C/D tested with 4000 V Pollution Degree (DIN VDE 0110, Table 1) WB SOIC-14/16 *Note: 1. Maintenance of the safety data is ensured by protective circuits. The Si823x provides a climate classification of 40/125/21. silabs.com | Building a more connected world. Rev. 2.15 | 30 Si823x Data Sheet Electrical Specifications Table 3.6. VDE 0884-10 Safety Limiting Values1 Parameter Symbol Test WB SOIC-14/16 NB SOIC-16 14 LD LGA/QFN Unit 150 150 150 C 50 50 50 mA 1.2 1.2 1.2 W Condition Case Temperature TS Safety Input Current S JA = 100 C/W (WB SOIC-14/16), 105 C/W (NB SOIC-16, 14 LD LGA/QFN) VDDI = 5.5 V, VDDA = VDDB = 24 V, TJ = 150 C, TA = 25 C Device Power Dissipation2 PD Notes: 1. Maximum value allowed in the event of a failure. Refer to the thermal derating curve in Figures Figure 3.4 WB SOIC, NB SOIC, 14 LD LGA/QFN Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per VDE 0884-10 on page 31. 2. The Si82xx is tested with VDDI = 5.5 V, VDDA = VDDB = 24 V, TJ = 150 C, CL = 100 pF, input 2 MHz 50% duty cycle square wave. Table 3.7. Thermal Characteristics Parameter Symbol WB SOIC-14/16 NB SOIC-16 14 LD LGA/QFN Unit JA 100 105 105 C/W Safety-Limiting Current (mA) IC Junction-to-Air Thermal Resistance 60 50 VDDI = 5.5 V VDDA, VDDB = 24 V 40 30 20 10 0 0 50 100 150 Case Temperature (C) 200 Figure 3.4. WB SOIC, NB SOIC, 14 LD LGA/QFN Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per VDE 0884-10 silabs.com | Building a more connected world. Rev. 2.15 | 31 Si823x Data Sheet Electrical Specifications Table 3.8. Absolute Maximum Ratings1 Parameter Symbol Min Max Unit TSTG -65 +150 C Ambient Temperature under Bias TA -40 +125 C Junction Temperature TJ -- +150 C Input-side Supply Voltage VDDI -0.6 6.0 V Driver-side Supply Voltage VDDA, VDDB -0.6 30 V Voltage on any Pin with respect to Ground VIO -0.5 VDD + 0.5 V Output voltage to GND, repeat spike of -2 V for 200 ns, 200 kHz VOA to GNDA, VOB to GNDB -2 VDDA/B + 0.5 V Peak Output Current (tPW = 10 s, duty cycle = 0.2%) IOPK -- 0.5 A IOPK -- 4.0 A Lead Solder Temperature (10 s) -- 260 C Maximum Isolation (Input to Output) (1 s) WB SOIC -- 6500 VRMS Maximum Isolation (Output to Output) (1 s) WB SOIC -- 2500 VRMS Maximum Isolation (Input to Output) (1 s) NB SOIC -- 4500 VRMS Maximum Isolation (Output to Output) (1 s) NB SOIC -- 2500 VRMS Maximum Isolation (Input to Output) (1 s) 14 LD LGA/QFN -- 3850 VRMS Maximum Isolation (Output to Output) (1 s) 14 LD LGA/QFN -- 650 VRMS Storage Temperature2 (0.5 Amp versions) Peak Output Current (tPW = 10 s, duty cycle = 0.2%) (4.0 Amp versions) Notes: 1. Permanent device damage may occur if the absolute maximum ratings are exceeded. Functional operation should be restricted to the conditions as specified in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. VDE certifies storage temperature from -40 to 150 C. silabs.com | Building a more connected world. Rev. 2.15 | 32 Si823x Data Sheet Applications 4. Applications The following examples illustrate typical circuit configurations using the Si823x. 4.1 High-Side/Low-Side Driver The Figure A in the drawing below shows the Si8230/3 controlled using the VIA and VIB input signals, and Figure B shows the Si8231/4 controlled by a single PWM signal. VDD2 C1 1 F C2 0.1 F 1500 V max GNDI VDDA CB VIA OUT2 VIB VOA Q1 C2 0.1 F VDDI 1500 V max GNDI VDDA CB PWM PWMOUT GNDA DT CONTROLLER C1 1 F VOA CONTROLLER RDT Si8231/4 VDDB VDDB I/O DISABLE C4 0.1 F C5 10 F I/O GNDB VDDB VOB Q1 GNDA DT Si8230/3 D1 C3 1F VDDI VDDI OUT1 RDT VDD2 D1 C3 1F VDDI DISABLE Q2 A C4 0.1 F C5 10 F GNDB VOB Q2 B Figure 4.1. Si823x in Half-Bridge Application For both cases, D1 and CB form a conventional bootstrap circuit that allows VOA to operate as a high-side driver for Q1, which has a maximum drain voltage of 1500 V. The boot-strap start up time will depend on the CB cap chosen. See application note, "AN486: HighSide Bootstrap Design Using Si823x ISODrivers in Power Delivery Systems". VOB is connected as a conventional low-side driver, and, in most cases, VDD2 is the same as VDDB. Note that the input side of the Si823x requires VDD in the range of 4.5 to 5.5 V (2.7 to 5.5 V for Si8237/8), while the VDDA and VDDB output side supplies must be between 6.5 and 24 V with respect to their respective grounds. It is recommended that bypass capacitors of 0.1 and 1 F value be used on the Si823x input side and that they be located as close to the chip as possible. Moreover, it is recommended that 0.1 and 10 F bypass capacitors, located as close to the chip as possible, be used on the Si823x output side to reduce high-frequency noise and maximize performance. silabs.com | Building a more connected world. Rev. 2.15 | 33 Si823x Data Sheet Applications 4.2 Dual Driver The figure below shows the Si823x configured as a dual driver. Note that the drain voltages of Q1 and Q2 can be referenced to a common ground or to different grounds with as much as 1500 V dc between them. VDDI C1 1 F C2 0.1 F VDDI Q1 VOA GNDI PH1 VIA PH2 VIB VDDA VDDA GNDA C3 0.1 F C4 10 F Si8232/5/7/8 CONTROLLER VDDB VDDB DISABLE I/O GNDB C5 0.1 F VOB C6 10 F Q2 Figure 4.2. Si8232/5/7/8 in a Dual Driver Application Because each output driver resides on its own die, the relative voltage polarities of VOA and VOB can reverse without damaging the driver. That is, the voltage at VOA can be higher or lower than that of VOB by VDD without damaging the driver. Therefore, a dual driver in a low-side high side/low side drive application can use either VOA or VOB as the high side driver. Similarly, a dual driver can operate as a dual low-side or dual high-side driver and is unaffected by static or dynamic voltage polarity changes. silabs.com | Building a more connected world. Rev. 2.15 | 34 Si823x Data Sheet Pin Descriptions 5. Pin Descriptions SOIC-16 (Narrow) SOIC-16 (Wide) VIA 1 16 VDDA VIA 1 16 VDDA VIB 2 15 VOA VIB 2 15 VOA VDDI 3 14 GNDA VDDI 3 14 GNDA GNDI 4 13 NC GNDI 4 13 NC DISABLE 5 12 NC DISABLE 5 12 NC DT 6 11 VDDB DT 6 11 VDDB NC 7 10 VOB NC 7 10 VOB VDDI 8 9 VDDI 8 9 Si8230 Si8233 GNDB Si8230 Si8233 GNDB Table 5.1. Si8230/3 Two-Input HS/LS Isolated Driver (SOIC-16). WB SOIC-14 with IS3 package designation, has pins 12 & 13 missing Pin Name 1 VIA Non-inverting logic input terminal for Driver A. 2 VIB Non-inverting logic input terminal for Driver B. 3 VDDI Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. 4 GNDI Input-side ground terminal. 5 DISABLE Device Disable. When high, this input unconditionally drives outputs VOA, VOB LOW. It is strongly recommended that this input be connected to external logic level to avoid erroneous operation due to capacitive noise coupling. 6 DT Dead time programming input. The value of the resistor connected from DT to ground sets the dead time between output transitions of VOA and VOB. Defaults to 400 ps dead time when connected to VDDI or left open (see 2.10 Programmable Dead Time and Overlap Protection). If improved noise immunity is desired, a 10 nF capacitor may be added in parallel to the dead time programming resistor (RDT). 7 NC No connection. 8 VDDI Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. 9 GNDB Ground terminal for Driver B. 10 VOB 11 VDDB 12 NC No connection. 13 NC No connection. 14 GNDA 15 VOA 16 VDDA silabs.com | Building a more connected world. Description Driver B output (low-side driver). Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V. Ground terminal for Driver A. Driver A output (high-side driver). Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V. Rev. 2.15 | 35 Si823x Data Sheet Pin Descriptions SOIC-16 (Narrow) SOIC-16 (Wide) PWM 1 16 VDDA NC 2 15 VOA VDDI 3 14 GNDI 4 DISABLE 5 DT PWM 1 16 VDDA NC 2 15 VOA GNDA VDDI 3 14 GNDA 13 NC GNDI 4 13 NC 12 NC DISABLE 5 12 NC 6 11 VDDB DT 6 11 VDDB NC 7 10 VOB NC 7 10 VOB VDDI 8 9 VDDI 8 9 Si8231 Si8234 GNDB Si8231 Si8234 GNDB Table 5.2. Si8231/4 PWM Input HS/LS Isolated Driver (SOIC-16). WB SOIC-14 with IS3 package designation, has pins 12 & 13 missing Pin Name Description 1 PWM PWM input. 2 NC 3 VDDI Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. 4 GNDI Input-side ground terminal. 5 DISABLE Device Disable. When high, this input unconditionally drives outputs VOA, VOB LOW. It is strongly recommended that this input be connected to external logic level to avoid erroneous operation due to capacitive noise coupling. 6 DT Dead time programming input. The value of the resistor connected from DT to ground sets the dead time between output transitions of VOA and VOB. Defaults to 400 ps dead time when connected to VDDI or left open (see 2.10 Programmable Dead Time and Overlap Protection). If improved noise immunity is desired, a 10 nF capacitor may be added in parallel to the dead time programming resistor (RDT). 7 NC No connection. 8 VDDI Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. 9 GNDB Ground terminal for Driver B. 10 VOB 11 VDDB 12 NC No connection. 13 NC No connection. 14 GNDA 15 VOA 16 VDDA silabs.com | Building a more connected world. No connection. Driver B output (low-side driver). Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V. Ground terminal for Driver A. Driver A output (high-side driver). Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V. Rev. 2.15 | 36 Si823x Data Sheet Pin Descriptions SOIC-16 (Narrow) SOIC-16 (Wide) VIA 1 16 VDDA VIA 1 16 VDDA VIB 2 15 VOA VIB 2 15 VOA VDDI 3 14 GNDA VDDI 3 14 GNDA GNDI 4 13 NC GNDI 4 13 NC DISABLE 5 12 NC DISABLE 5 12 NC NC 6 11 VDDB NC 6 11 VDDB NC 7 10 VOB NC 7 10 VOB VDDI 8 9 VDDI 8 9 Si8232 Si8235 Si8237 Si8238 GNDB Si8232 Si8235 Si8237 Si8238 GNDB Table 5.3. Si8232/5/7/8 Dual Isolated Driver (SOIC-16). WB SOIC-14 with IS3 package designation, has pins 12 & 13 missing Pin Name 1 VIA Non-inverting logic input terminal for Driver A. 2 VIB Non-inverting logic input terminal for Driver B. 3 VDDI Input-side power supply terminal; connect to a source of 4.5 to 5.5 V, (2.7 to 5.5 V for Si8237/8). 4 GNDI Input-side ground terminal. 5 DISABLE 6 NC No connection. 7 NC No connection. 8 VDDI Input-side power supply terminal; connect to a source of 4.5 to 5.5 V, (2.7 to 5.5 V for Si8237/8). 9 GNDB Ground terminal for Driver B. 10 VOB 11 VDDB 12 NC No connection. 13 NC No connection. 14 GNDA 15 VOA 16 VDDA silabs.com | Building a more connected world. Description Device Disable. When high, this input unconditionally drives outputs VOA, VOB LOW. It is strongly recommended that this input be connected to external logic level to avoid erroneous operation due to capacitive noise coupling. Driver B output. Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V. Ground terminal for Driver A. Driver A output. Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V. Rev. 2.15 | 37 Si823x Data Sheet Pin Descriptions LGA-14 and QFN-14 (5 x 5 mm) GNDI 1 14 VDDA VIA 2 13 VOA VIB 3 12 GNDA VDDI 4 11 NC DISABLE 5 10 VDDB DT 6 9 VOB VDDI 7 8 GNDB Si8233 Table 5.4. Si8233 Two-Input HS/LS Isolated Driver (14 LD LGA and QFN) Pin Name GNDI 1 Input-side ground terminal. VIA 2 Non-inverting logic input terminal for Driver A. VIB 3 Non-inverting logic input terminal for Driver B. VDDI 4 Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. DISABLE 5 Device Disable. When high, this input unconditionally drives outputs VOA, VOB LOW. It is strongly recommended that this input be connected to external logic level to avoid erroneous operation due to capacitive noise coupling. DT 6 Dead time programming input. The value of the resistor connected from DT to ground sets the dead time between output transitions of VOA and VOB. Defaults to 400 ps dead time when connected to VDDI or left open (see2.10 Programmable Dead Time and Overlap Protection). If improved noise immunity is desired, a 10 nF capacitor may be added in parallel to the dead time programming resistor (RDT). VDDI 7 Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. GNDB 8 Ground terminal for Driver B. VOB 9 Driver B output (low-side driver). VDDB 10 Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V. NC 11 No connection. GNDA 12 Ground terminal for Driver A. VOA 13 Driver A output (high-side driver). VDDA 14 Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V. silabs.com | Building a more connected world. Description Rev. 2.15 | 38 Si823x Data Sheet Pin Descriptions LGA-14 and QFN-14 (5 x 5 mm) GNDI 1 14 VDDA PWM 2 13 VOA NC 3 12 GNDA VDDI 4 11 NC DISABLE 5 10 VDDB DT 6 9 VOB VDDI 7 8 GNDB Si8234 Table 5.5. Si8234 PWM Input HS/LS Isolated Driver (14 LD LGA and QFN) Pin Name GNDI 1 Input-side ground terminal. PWM 2 PWM input. NC 3 No connection. VDDI 4 Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. DISABLE 5 Device Disable. When high, this input unconditionally drives outputs VOA, VOB LOW. It is strongly recommended that this input be connected to external logic level to avoid erroneous operation due to capacitive noise coupling. DT 6 Dead time programming input. The value of the resistor connected from DT to ground sets the dead time between output transitions of VOA and VOB. Defaults to 400 ps dead time when connected to VDDI or left open (see 2.10 Programmable Dead Time and Overlap Protection). If improved noise immunity is desired, a 10 nF capacitor may be added in parallel to the dead time programming resistor (RDT). VDDI 7 Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. GNDB 8 Ground terminal for Driver B. VOB 9 Driver B output (low-side driver). VDDB 10 Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V. NC 11 No connection. GNDA 12 Ground terminal for Driver A. VOA 13 Driver A output (high-side driver). VDDA 14 Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V. silabs.com | Building a more connected world. Description Rev. 2.15 | 39 Si823x Data Sheet Pin Descriptions LGA-14 and QFN-14 (5 x 5 mm) GNDI 1 14 VDDA VIA 2 13 VOA VIB 3 12 GNDA VDDI 4 11 NC DISABLE 5 10 VDDB NC 6 9 VOB VDDI 7 8 GNDB Si8235 Table 5.6. Si8235 Dual Isolated Driver (14 LD LGA and QFN) Pin Name GNDI 1 Input-side ground terminal. VIA 2 Non-inverting logic input terminal for Driver A. VIB 3 Non-inverting logic input terminal for Driver B. VDDI 4 Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. DISABLE 5 Device Disable. When high, this input unconditionally drives outputs VOA, VOB LOW. It is strongly recommended that this input be connected to external logic level to avoid erroneous operation due to capacitive noise coupling. NC 6 No connection. VDDI 7 Input-side power supply terminal; connect to a source of 4.5 to 5.5 V. GNDB 8 Ground terminal for Driver B. VOB 9 Driver B output (low-side driver). VDDB 10 Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V. NC 11 No connection. GNDA 12 Ground terminal for Driver A. VOA 13 Driver A output (high-side driver). VDDA 14 Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V. silabs.com | Building a more connected world. Description Rev. 2.15 | 40 Si823x Data Sheet Package Outlines 6. Package Outlines 6.1 Package Outline: 16-Pin Wide Body SOIC Figure 6.1 16-Pin Wide Body SOIC on page 41 illustrates the package details for the Si823x in a 16-Pin Wide Body SOIC. Table 6.1 Package Diagram Dimensions on page 41 lists the values for the dimensions shown in the illustration. Figure 6.1. 16-Pin Wide Body SOIC Table 6.1. Package Diagram Dimensions Dimension Min Max A -- 2.65 A1 0.10 0.30 A2 2.05 -- b 0.31 0.51 c 0.20 0.33 D 10.30 BSC E 10.30 BSC E1 7.50 BSC e 1.27 BSC L 0.40 1.27 h 0.25 0.75 0 8 silabs.com | Building a more connected world. Rev. 2.15 | 41 Si823x Data Sheet Package Outlines Dimension Min Max -- 0.10 bbb -- 0.33 ccc -- 0.10 ddd -- 0.25 eee -- 0.10 fff -- 0.20 Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to JEDEC Outline MS-013, Variation AA. 4. Recommended reflow profile per JEDEC J-STD-020 specification for small body, lead-free components. silabs.com | Building a more connected world. Rev. 2.15 | 42 Si823x Data Sheet Package Outlines 6.2 Package Outline: 14-Pin Wide Body SOIC Figure 6.2 Si823x 14-pin WB SOIC Outline on page 43 illustrates the package details for the Si823x in a 14-Pin Wide Body SOIC. Table 6.2 Package Diagram Dimensions on page 43 lists the values for the dimensions shown in the illustration. Figure 6.2. Si823x 14-pin WB SOIC Outline Table 6.2. Package Diagram Dimensions Dimension MIN MAX A -- 2.65 A1 0.10 0.30 A2 2.05 -- b 0.31 0.51 c 0.20 0.33 D 10.30 BSC E 10.30 BSC E1 7.50 BSC e 1.27 BSC L 0.40 1.27 h 0.25 0.75 0 8 aaa -- 0.10 bbb -- 0.33 ccc -- 0.10 ddd -- 0.25 eee -- 0.10 fff -- 0.20 silabs.com | Building a more connected world. Rev. 2.15 | 43 Si823x Data Sheet Package Outlines Dimension MIN MAX Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to JEDEC Outline MS-013, Variation AA. 4. Recommended reflow profile per JEDEC J-STD-020 specification for small body, lead-free components. silabs.com | Building a more connected world. Rev. 2.15 | 44 Si823x Data Sheet Package Outlines 6.3 Package Outline: 16-Pin Narrow Body SOIC Figure 6.3 16-pin Small Outline Integrated Circuit (SOIC) Package on page 45 illustrates the package details for the Si823x in a 16pin narrow-body SOIC. Table 6.3 Package Diagram Dimensions on page 45 lists the values for the dimensions shown in the illustration. Figure 6.3. 16-pin Small Outline Integrated Circuit (SOIC) Package Table 6.3. Package Diagram Dimensions Dimension Min Max Dimension Min Max A -- 1.75 L 0.40 1.27 A1 0.10 0.25 L2 0.25 BSC A2 1.25 -- h 0.25 0.50 b 0.31 0.51 0 8 c 0.17 0.25 aaa 0.10 D 9.90 BSC bbb 0.20 E 6.00 BSC ccc 0.10 E1 3.90 BSC ddd 0.25 e 1.27 BSC Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to the JEDEC Solid State Outline MS-012, Variation AC. 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Building a more connected world. Rev. 2.15 | 45 Si823x Data Sheet Package Outlines 6.4 Package Outline: 14 LD LGA (5 x 5 mm) Figure 6.4 Si823x LGA Outline on page 46 illustrates the package details for the Si823x in an LGA outline. Table 6.4 Package Diagram Dimensions on page 46 lists the values for the dimensions shown in the illustration. Figure 6.4. Si823x LGA Outline Table 6.4. Package Diagram Dimensions Dimension MIN NOM MAX A 0.74 0.84 0.94 b 0.25 0.30 0.35 D 5.00 BSC D1 4.15 BSC e 0.65 BSC E 5.00 BSC E1 3.90 BSC L 0.70 0.75 0.80 L1 0.05 0.10 0.15 aaa -- -- 0.10 bbb -- -- 0.10 ccc -- -- 0.08 ddd -- -- 0.15 eee -- -- 0.08 Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. silabs.com | Building a more connected world. Rev. 2.15 | 46 Si823x Data Sheet Package Outlines 6.5 Package Outline: 14 LD QFN Figure 6.5 Si823x 14-pin LD QFN Outline on page 47 illustrates the package details for the Si823x in an QFN outline. Table 6.5 Package Diagram Dimensions on page 47 lists the values for the dimensions shown in the illustration. Figure 6.5. Si823x 14-pin LD QFN Outline Table 6.5. Package Diagram Dimensions Dimension MIN NOM MAX A 0.74 0.85 0.90 A1 0 0.025 0.05 b 0.25 0.30 0.35 D 5.00 BSC e 0.65 BSC E 5.00 BSC E1 3.60 BSC L 0.50 0.60 0.70 L13 -- 0.10 BSC -- ccc -- -- 0.08 ddd -- -- 0.10 Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. L1 shall not be less than 0.01 mm. silabs.com | Building a more connected world. Rev. 2.15 | 47 Si823x Data Sheet Land Patterns 7. Land Patterns 7.1 Land Pattern: 16-Pin Wide Body SOIC Figure 7.1 16-Pin SOIC Land Pattern on page 48 illustrates the recommended land pattern details for the Si823x in a 16-pin widebody SOIC. Table 7.1 16-Pin Wide Body SOIC Land Pattern Dimensions on page 48 lists the values for the dimensions shown in the illustration. Figure 7.1. 16-Pin SOIC Land Pattern Table 7.1. 16-Pin Wide Body SOIC Land Pattern Dimensions Dimension Feature (mm) C1 Pad Column Spacing 9.40 E Pad Row Pitch 1.27 X1 Pad Width 0.60 Y1 Pad Length 1.90 Notes: 1. This Land Pattern Design is based on IPC-7351 pattern SOIC127P1032X265-16AN for Density Level B (Median Land Protrusion). 2. All feature sizes shown are at Maximum Material Condition (MMC) and a card fabrication tolerance of 0.05 mm is assumed. silabs.com | Building a more connected world. Rev. 2.15 | 48 Si823x Data Sheet Land Patterns 7.2 Land Pattern: 14-Pin Wide Body SOIC Figure 7.2 14-Pin WB SOIC Land Pattern on page 49 illustrates the recommended land pattern details for the Si823x in a 14-pin Wide Body SOIC. Table 7.2 14-Pin WB SOIC Land Pattern Dimensions on page 49 lists the values for the dimensions shown in the illustration. Figure 7.2. 14-Pin WB SOIC Land Pattern Table 7.2. 14-Pin WB SOIC Land Pattern Dimensions Dimension Feature (mm) Pad Column Spacing 9.70 E Pad Row Pitch 1.27 X1 Pad Width 0.60 Y1 Pad Length 1.60 C1 Notes: 1. This Land Pattern Design is based on IPC-7351 pattern SOIC127P1032X265-16AN for Density Level B (Median Land Protrusion). 2. All feature sizes shown are at Maximum Material Condition (MMC) and a card fabrication tolerance of 0.05 mm is assumed. silabs.com | Building a more connected world. Rev. 2.15 | 49 Si823x Data Sheet Land Patterns 7.3 Land Pattern: 16-Pin Narrow Body SOIC Figure 7.3 16-Pin Narrow Body SOIC PCB Land Pattern on page 50 illustrates the recommended land pattern details for the Si823x in a 16-pin narrow-body SOIC. Table 7.3 16-Pin Narrow Body SOIC Land Pattern Dimensions on page 50 lists the values for the dimensions shown in the illustration. Figure 7.3. 16-Pin Narrow Body SOIC PCB Land Pattern Table 7.3. 16-Pin Narrow Body SOIC Land Pattern Dimensions Dimension Feature (mm) C1 Pad Column Spacing 5.40 E Pad Row Pitch 1.27 X1 Pad Width 0.60 Y1 Pad Length 1.55 Notes: 1. This Land Pattern Design is based on IPC-7351 pattern SOIC127P600X165-16N for Density Level B (Median Land Protrusion). 2. All feature sizes shown are at Maximum Material Condition (MMC) and a card fabrication tolerance of 0.05 mm is assumed. silabs.com | Building a more connected world. Rev. 2.15 | 50 Si823x Data Sheet Land Patterns 7.4 Land Pattern: 14 LD LGA/QFN Figure 7.4 14-Pin LGA/QFN Land Pattern on page 51 illustrates the recommended land pattern details for the Si823x in a 14-pin LGA/ QFN. Table 7.4 14-Pin LGA/QFN Land Pattern Dimensions on page 51 lists the values for the dimensions shown in the illustration. Figure 7.4. 14-Pin LGA/QFN Land Pattern Table 7.4. 14-Pin LGA/QFN Land Pattern Dimensions Dimension (mm) C1 4.20 E 0.65 X1 0.80 Y1 0.40 Notes: General 1. All dimensions shown are in millimeters (mm). 2. This Land Pattern Design is based on the IPC-7351 guidelines. 3. All dimensions shown are at Maximum Material Condition (MMC). Least Material Condition (LMC) is calculated based on a Fabrication Allowance of 0.05 mm. Solder Mask Design 1. All metal pads are to be non-solder mask defined (NSMD). Clearance between the solder mask and the metal pad is to be 60 m minimum, all the way around the pad. Stencil Design 1. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure good solder paste release. 2. The stencil thickness should be 0.125 mm (5 mils). 3. The ratio of stencil aperture to land pad size should be 1:1. Card Assembly 1. A No-Clean, Type-3 solder paste is recommended. 2. The recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Building a more connected world. Rev. 2.15 | 51 Si823x Data Sheet Top Markings 8. Top Markings 8.1 Si823x Top Marking (14/16-Pin Wide Body SOIC) Table 8.1. Top Marking Explanation (14/16-Pin Wide Body SOIC) Line 1 Marking: Base Part Number Ordering Options See Ordering Guide for more information. Si823 = ISOdriver product series Y = Peak output current 0, 1, 2, 7 = 0.5 A 3, 4, 5, 8 = 4.0 A U = UVLO level A = 5 V; B = 8 V; C = 10 V; D = 12.5 V V = Isolation rating B = 2.5 kV; C = 3.75 kV; D = 5.0 kV Line 2 Marking: YY = Year WW = Workweek TTTTTT = Mfg Code Line 3 Marking: Circle = 1.5 mm Diameter Assigned by the Assembly House. Corresponds to the year and workweek of the mold date. Manufacturing Code from Assembly Purchase Order form. "e4" Pb-Free Symbol (Center Justified) Country of Origin TW = Taiwan (as shown), TH = Thailand ISO Code Abbreviation silabs.com | Building a more connected world. Rev. 2.15 | 52 Si823x Data Sheet Top Markings 8.2 Si823x Top Marking (16-Pin Narrow Body SOIC) Line 1 Marking: Base Part Number Ordering Options See Ordering Guide for more information. Si823 = ISOdriver product series Y = Peak output current 0, 1, 2, 7 = 0.5 A 3, 4, 5, 8 = 4.0 A U = UVLO level A = 5 V; B = 8 V; C = 10 V; D = 12.5 V V = Isolation rating A = 1.0 kV; B = 2.5 kV; C = 3.75 kV Line 2 Marking: YY = Year WW = Workweek TTTTTT = Mfg Code silabs.com | Building a more connected world. Assigned by the Assembly House. Corresponds to the year and workweek of the mold date. Manufacturing Code from Assembly Purchase Order form. Rev. 2.15 | 53 Si823x Data Sheet Top Markings 8.3 Si823x Top Marking (14 LD LGA/QFN) Line 1 Marking: Base Part Number Ordering Options See Ordering Guide for more information. Si823 = ISOdriver product series Y = Peak output current 0, 1, 2 = 0.5 A 3, 4, 5 = 4.0 A Line 2 Marking: Ordering options U = UVLO level A = 5 V; B = 8 V; C = 10 V; D = 12.5 V V = Isolation rating A = 1.0 kV; B = 2.5 kV; C = 3.75 kV I = -40 to +125 C ambient temperature range M = LGA package type M1 = QFN package type Line 3 Marking: TTTTTT Manufacturing Code from Assembly Line 4 Marking: Circle = 1.5 mm diameter Pin 1 identifier YYWW silabs.com | Building a more connected world. Manufacturing date code Rev. 2.15 | 54 Si823x Data Sheet Revision History 9. Revision History Revision 2.15 September 2019 * Updated Section 1. Ordering Guide. Revision 2.14 June 2019 * Added automotive grade OPN, Si8230BD-AS, to Ordering Guide for Automotive Grade OPNs. Revision 2.13 September 2018 * Added automotive grade OPNs in Ordering Guide for Automotive Grade OPNs. * Modified power equations in 2.7 Power Dissipation Considerations. * Corrected typo for IDISABLE in Table 3.1 Electrical Characteristics1 on page 24. * Reformatted Table 3.5 VDE 0884-10 Insulation Characteristics1 on page 30. * Added Absolute Max rating of -2V/200 ns on output pins in Table 3.8 Absolute Maximum Ratings1 on page 32. * Updated 7.2 Land Pattern: 14-Pin Wide Body SOIC. Revision 2.12 May 2018 * Updated the Ordering Guide for Automotive-Grade OPN options. Revision 2.1.1 January 2018 * Added new table to Ordering Guide for Automotive-Grade OPN options. Revision 2.1 October 2017 * Added IS3 and IM1 packaging options * Added IEC 62368-1 references throughout * Changed max propagation delay spec from 60 ns to 45 ns based on new test limits * Removed references to IEC 61010 * Removed references to IEC 60747, replaced with references to VDE 0884-10 Revision 2.0 August 7, 2017 Revision 1.9 July 7, 2017 * Updated 1. Ordering Guide to designate tape and reel packaging option. Revision 1.8 May 17, 2016 * Converted document from Framemaker to DITA. silabs.com | Building a more connected world. Rev. 2.15 | 55 Si823x Data Sheet Revision History Revision 1.7 * Updated 3.1 Test Circuits * Added CQC certificate numbers. * Updated Table 3.3 Insulation and Safety-Related Specifications on page 29 * Updated Erosion Depth. * Updated Table 3.5 VDE 0884-10 Insulation Characteristics1 on page 30 * Updated VPR for WBSOIC-16. * Updated Table 3.8 Absolute Maximum Ratings1 on page 32 * Removed Io and added Peak Output Current specifications. * Updated Equation 1. * Updated Figure 4.1 Si823x in Half-Bridge Application on page 33. * Updated Figure 4.2 Si8232/5/7/8 in a Dual Driver Application on page 34. * Updated Ordering Guide Table 1.1 Si823x Ordering Guide 1, 2, 4 on page 2 Revision 1.6 * Updated Table 1.1 Si823x Ordering Guide 1, 2, 4 on page 2, Ordering Part Numbers. * Added Revision D Ordering Part Numbers. * Removed all Ordering Part Numbers of previous revisions. Revision 1.5 * Updated Table 3.1 Electrical Characteristics1 on page 24, input and output supply current. * * * * Added references to AEC-Q100 qualified throughout. Changed all 60747-5-2 references to 60747-5-5. Added references to CQC throughout. Updated pin descriptions throughout. * Corrected dead time default to 400 ps from 1 ns. * Updated Table 1.1 Si823x Ordering Guide 1, 2, 4 on page 2, Ordering Part Numbers. * Removed moisture sensitivity level table notes. Revision 1.4 * Updated 1. Ordering Guide. * Updated "3 V VDDI Ordering Options". Revision 1.3 * Added Si8237/8 throughout. * Updated Table 3.1 Electrical Characteristics1 on page 24. * * * * * * * Updated Figure 3.1 IOL Sink Current Test Circuit on page 27. UpdatedFigure 3.2 IOH Source Current Test Circuit on page 27. Added Figure 3.3 Common Mode Transient Immunity Test Circuit on page 28. Updated Si823x Family Truth Table to include notes 1 and 2. Updated 2.10 Programmable Dead Time and Overlap Protection. Removed references to Figures 26A and 26B. Updated Table 1.1 Si823x Ordering Guide 1, 2, 4 on page 2. * Added Si8235-BA-C-IS1 ordering part number. * Added table note. silabs.com | Building a more connected world. Rev. 2.15 | 56 Si823x Data Sheet Revision History Revision 1.2 * Updated 1. Ordering Guide. * Updated moisture sensitivity level (MSL) for all package types. * Updated Table 3.8 Absolute Maximum Ratings1 on page 32. * * * * * * * * Added junction temperature spec. Updated 3.1 Test Circuits with new notes. Updated Figures Figure 2.16 Output Sink Current vs. Supply Voltage on page 13, Figure 2.14 Output Source Current vs. Supply Voltage on page 12, Figure 2.17 Output Sink Current vs. Temperature on page 13, and Figure 2.15 Output Source Current vs. Temperature on page 12 to reflect correct y-axis scaling. Updated Figure 4.2 Si8232/5/7/8 in a Dual Driver Application on page 34. Updated . Updated 6.1 Package Outline: 16-Pin Wide Body SOIC. Updated Table 6.1 Package Diagram Dimensions on page 41. Change references to 1.5 kVRMS rated devices to 1.0 kVRMS throughout. * Updated 2.7 Power Dissipation Considerations. Revision 1.1 * Updated . * Updated CMTI specification. * Updated Table 3.1 Electrical Characteristics1 on page 24. * Updated CMTI specification. * Updated Table 3.5 VDE 0884-10 Insulation Characteristics1 on page 30. * Updated 4.2 Dual Driver. * Updated 1. Ordering Guide. * Replaced pin descriptions on page 1 with chip graphics. Revision 1.0 * Updated Tables 3.1 Test Circuits, Table 3.3 Insulation and Safety-Related Specifications on page 29, Table 3.4 IEC 60664-1 Ratings on page 30, and Table 3.5 VDE 0884-10 Insulation Characteristics1 on page 30. * Updated 1. Ordering Guide. * Added 5 V UVLO ordering options * Added Device Marking sections. Revision 0.3 * Moved Sections 2, 3, and 4 to after Section 5. * Updated Tables Table 5.4 Si8233 Two-Input HS/LS Isolated Driver (14 LD LGA and QFN) on page 38, Table 5.5 Si8234 PWM Input HS/LS Isolated Driver (14 LD LGA and QFN) on page 39. * Removed Si8230, Si8231, and Si8232 from pinout and from title. * Updated and added Ordering Guide footnotes. * Updated UVLO specifications in Table 3.1 Electrical Characteristics1 on page 24. * Added PWD and Output Supply Active Current specifications in Table 3.1 Electrical Characteristics1 on page 24. * Updated and added typical operating condition graphs in 2.3 Typical Operating Characteristics (0.5 Amp) and 2.4 Typical Operating Characteristics (4.0 Amp). Revision 0.2 * Updated all specs to reflect latest silicon revision. * Updated Table 3.1 Electrical Characteristics1 on page 24 to include new UVLO options. * Updated Table 3.8 Absolute Maximum Ratings1 on page 32 to reflect new maximum package isolation ratings * Added Figures 34, 35, and 36. * Updated Ordering Guide to reflect new package offerings. * Added "Undervoltage Lockout (UVLO)" section to describe UVLO operation. Revision 0.11 * Initial release. silabs.com | Building a more connected world. Rev. 2.15 | 57 Smart. Connected. Energy-Friendly. Products Quality www.silabs.com/products www.silabs.com/quality Support and Community community.silabs.com Disclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice to the product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Without prior notification, Silicon Labs may update product firmware during the manufacturing process for security or reliability reasons. Such changes will not alter the specifications or the performance of the product. Silicon Labs shall have no liability for the consequences of use of the information supplied in this document. This document does not imply or expressly grant any license to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any FDA Class III devices, applications for which FDA premarket approval is required or Life Support Systems without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Silicon Labs disclaims all express and implied warranties and shall not be responsible or liable for any injuries or damages related to use of a Silicon Labs product in such unauthorized applications. Trademark Information Silicon Laboratories Inc.(R) , Silicon Laboratories(R), Silicon Labs(R), SiLabs(R) and the Silicon Labs logo(R), Bluegiga(R), Bluegiga Logo(R), ClockBuilder(R), CMEMS(R), DSPLL(R), EFM(R), EFM32(R), EFR, Ember(R), Energy Micro, Energy Micro logo and combinations thereof, "the world's most energy friendly microcontrollers", Ember(R), EZLink(R), EZRadio(R), EZRadioPRO(R), Gecko(R), Gecko OS, Gecko OS Studio, ISOmodem(R), Precision32(R), ProSLIC(R), Simplicity Studio(R), SiPHY(R), Telegesis, the Telegesis Logo(R), USBXpress(R) , Zentri, the Zentri logo and Zentri DMS, Z-Wave(R), and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other products or brand names mentioned herein are trademarks of their respective holders. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA http://www.silabs.com