Fiber Optic Transmitter
OPF352A
© TT electronics plc Issue C 03/2019 Page 1
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
TT Electronics | OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
sensors@electronics.com | www.electronics.com
Descripon:
The OPF352A ber opc transmiers are high performance devices packaged for data communicaon links. This
transmier is an 850nm GaAlAs LED and is specically designed to eciently launch opcal power into bers ranging in size
from 50/125µm up to 200/300µm diameter ber. Mulple power ranges with upper and lower limits are oered which
allows the designer to select a device best suited for the applicaon.
This product’s combinaon of features including high speed and ecient coupled power makes it an ideal transmier for
integraon into all types of data communicaons equipment.
The mechanical design of this packaged is intended for PC Board or panel mounng. It is shipped with a lock washer, jam
nut, 2 #2-56 screws, and a protecve dust cap.
Applicaons:
• Power generaon communicaon
• Industrial Ethernet equipment
• Copper-to-ber media conversion
• Intra-system ber opc links
• Video surveillance systems
Features:
• 850nm LED technology
• Popular ST style receptacle
• Pre-tested with ber to assure performance
• Component pre-mounted and ready to use
• 35MHz operaon
Typical Coupled Power
IF = 100mA, 25°C
Fiber Size Type N.A. OPF352A
50/125 µm Graded Index 0.20 29µW
62.5/125 µm Graded Index 0.28 83µW
100/140 µm Graded Index 0.29 240µW
200/300 µm Step Index 0.41 810µW
RoHS ESD Class 2 ST is a registered trademark of AT&T.
All Optek OPF LED emiers are AEL Class I as dened by
IEC 60825-1 and are Risk Group 1 (Low-Risk) as dened
by IEC 62471.
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
Fiber Optic Transmitter
OPF352A
Issue C 03/2019 Page 2
TT Electronics | OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
sensors@electronics.com | www.electronics.com
Mechanical Data
DIMENSIONS ARE IN INCHES (MILLIMETERS)
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
Fiber Optic Transmitter
OPF352A
Issue C 03/2019 Page 3
TT Electronics | OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
sensors@electronics.com | www.electronics.com
Absolute Maximum Rangs (TA = 25° C unless otherwise noted)
Storage Temperature Range -55° C to +100° C
Operang Temperature Range -40° C to +85° C
Lead Soldering Temperature(1) 260° C
Connuous Forward Current(2) 100 mA
Maximum Reverse Voltage 1.0 V
Electrical Specicaons
Electrical Characteriscs (TA = 25° C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
POC Total Coupled Power
50/125 µm Fiber, NA = 0.20 OPF352A 25.0 29.0 µW IF = 100 mA
VF Forward Voltage 1.8 2.2 V IF = 100 mA
VR Reverse Voltage 1.8 V IR = 100 µA
λ Wavelength 830 850 870 nm IF = 50 mA
λ Opcal Bandwidth 50 60 nm IF = 50 mA
tr,tf Rise and Fall Time 6.0 10.0 ns IF = 100 mA; 10% to 90%(3)
Notes:
1. Maximum of 5 seconds with soldering iron. Duraon can be extended to 10 seconds when ow soldering. RMA ux is
recommended.
2. De-rate linearly at 1.33mA /°C above 25°C .
3. No Pre-bias.
4. All Optek ber opc LED products are subjected to 100% burn-in as part of its quality control process. The burn-in con-
dions are 96 hours at 100mA drive current and 25°C ambient temperature.
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
Fiber Optic Transmitter
OPF352A
Issue C 03/2019 Page 4
TT Electronics | OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
sensors@electronics.com | www.electronics.com
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
010 20 30 40 50 60 70 80 90 100 110
Forward Voltage (V)
Forward Current (mA)
Forward Voltage vs. Forward Current
-40oC -20oC 0oC 20oC 40oC 60oC 80oC 100oC
0%
20%
40%
60%
80%
100%
120%
140%
010 20 30 40 50 60 70 80 90 100
Relative Coupled Power (%)
Forward Current (mA)
Relative Coupled Power vs. Forward Current
-40oC -20oC 0oC 20oC 40oC 60oC 80oC 100oC
˚ ˚ ˚ ˚ ˚ ˚ ˚ ˚
˚ ˚ ˚ ˚ ˚ ˚ ˚ ˚
Performance