WIRELESS COMMUNICATIONS DIVISION TQ1303-TQ1308 OUT 1 IN 100 ohm Splitter DATA SHEET 0 Power Splitters OUT 2 Features Product Description The TQ1303 through TQ1308 are a family of passive power splitters. These devices are used to split one input power into two output powers, with minimal degradation. The input and outputs are matched to 50 ohms and by keeping the100 ohm resistor off-chip it allows for high power capacity. P/N TQ1303 TQ1304 TQ1305 TQ1305 TQ1305 TQ1308 Freq. Amp Phase I.L. Isol. VSWR (MHz) Bal. Deviation (dB) (dB) (max) (dB) (degrees) (max) 1.7 o 741 <1 0 +- 3 3.5 15 +-19 (max) (max) +-0.5 (min) 967 <1 0 +-3 3.5 18 +-13 (max) (max) +-0.5 (min) o o 1370 <1 0 +-3 3.5 20 +-30 (max) (max) +-0.5 (min) 1406 <1 0 +-3 3.5 20 +-6 (max) (max) +-0.5 (min) o o 1412 <1 0 +-3 3.5 20 +-47.5 (max) (max) +-0.5 (min) o 2140 <1 0 +-3 3.4 17 +-20 (max) (max) +-0.5 (min) 1.6 1.5 1.5 Small size: MLF 2x2 Less than <3 Phase Deviation Excellent Isolation Low VSWR Less than <1 dB Amplitude Balance Applications Wireless Communications Power Sensing/Level Sensing Reflectometers Amplifier Combining General Purpose Apps 1.5 1.7 Note: Min/Max limits are -40 to +85C case temperatures, unless otherwise specified. For additional information and latest specifications, see our website: www.triquint.com 1 TQ1303-1308 Data Sheet Absolute Maximum Ratings Parameter Value Units Operating Temperature -40 to 85 C Storage Temperature -60 to 150 C Block Diagram: TQ1303-TQ1308 Pin 1 INPUT Pin 5 GND Pin 2 GND Pin 3 OUT 1 Pin 4 OUT 2 PIN-OUT FUNCTIONAL DESCRIPTION Pin Name Description 1 INPUT RF Input 2 GND Ground 3 OUT 1 Output 1 port 4 OUT 2 Output 2 port 5 GND Ground For additional information and latest specifications, see our website: www.triquint.com 2 TQ1303-1308 Data Sheet Typical Performance Test Conditions, unless Otherwise Specified: Tc=+25C TQ1303 Amplitude Balance TQ1303 Isolation 25 3 Amplitude Balance (dB) 2.5 Amplitude Balance Isolation (dB) 2 20 1.5 1 15 10 Isolation 5 0.5 0 0 500 1000 1500 2000 500 2500 1000 1250 TQ1304 Amplitude Balance 3 3 2 2.5 1 0 -1 Phase Deviation -2 Amplitude Balance (dB) Phase Deviation (degrees) TQ1303 Phase Deviation -3 2 Amplitude Balance 1.5 1 0.5 0 500 1000 1500 500 Frequency (MHz) 1500 2000 2500 TQ1304 Phase Deviation 3 6 2 5 4 3 Output 1 Output 2 1 0 Phase Deviation (degrees) 7 2 1000 Frequency (MHz) TQ1303 Insertion Loss Insertion Loss (dB) 750 Frequency (MHz) Frequency (MHz) 1 0 -1 Phase Deviation -2 -3 500 1000 Frequency (MHz) 1500 500 1000 1500 Frequency (MHz) For additional information and latest specifications, see our website: www.triquint.com 3 TQ1303-1308 Data Sheet TQ1305 Phase Deviation 3 5 2 4 3 Output 1 2 Output 2 1 Phase Deviation (degrees) Insertion Loss (dB) TQ1304 Insertion Loss 6 0 0 -1 -2 -3 500 1000 500 1500 1500 Frequency (MHz) TQ1304 Isolation TQ1305 Insertion Loss 30 6 25 5 20 15 Isolation 10 4 3 Output 2 2 Output 2 1 5 0 0 500 1000 500 1500 1000 1500 2000 Frequency (MHz) Frequency (MHz) TQ1305 Amplitude Balance TQ1305 Isolation 3 35 2.5 30 Amplitude Balance 2 1.5 1 Isolation (dB) Amplitude Balance (dB) 1000 Frequency (MHz) Insertion Loss (dB) Isolation (dB) Phase Deviation 1 25 20 15 10 Isolation 0.5 5 0 0 500 1000 1500 Frequency (MHz) 2000 2500 500 1000 1500 2000 2500 Frequency (MHz) For additional information and latest specifications, see our website: www.triquint.com 4 TQ1303-1308 Data Sheet TQ1308 Isolation 3 25 2.5 20 Amplitude Balance 2 1.5 1 Isolation (dB) Amplitude Balance (dB) TQ1308 Amplitude Balance 15 Isolation 10 5 0.5 0 0 500 1000 1500 2000 2500 500 1000 1500 2140 2500 Frequency (MHz) Frequency (MHz) TQ1308 Phase Deviation Phase Deviation (degrees) 3 2 Phase Deviation 1 0 -1 -2 -3 500 1000 1500 2000 2500 Frequency (MHz) TQ1308 Insertion Loss 4.5 Insertion Loss (dB) 4 3.5 3 2.5 2 Output 1 1.5 Output 2 1 0.5 0 500 1000 1500 2000 2500 Frequency (MHz) For additional information and latest specifications, see our website: www.triquint.com 5 TQ1303-1308 Data Sheet Package Dimensions: D2 L3 L L2 b1 E1 E2 E E4 r e D1 D A2 A A3 JEDEC DESIGNATION 1. DESCRIPTION METRIC ENGLISH NOTE A OVERALL HEIGHT 0.90 +/-.10 mm .035 +/-.004 in 1 A2 PACKAGE BODY HEIGHT 0.70 +/-.05mm .028 +/-.002 in 1 A3 PACKAGE BASE HEIGHT r LEAD RADIUS b TERMINAL WIDTH D PACKAGE LENGTH D2 EXOPSED PAD LENGTH 0.20 +/-.05mm .008 +/-.002 in 1 .003 in 1 0.23 +/-.05 mm .009 +/-.002 in 1 2.00 mm BSC .079 in 1 0.075 mm REF 1.324 +/-0.1 mm .052 +/-.004 in 1 e TERMINAL PITCH 0.65 mm BSC .026 in 1 E PACKAGE WIDTH 2.00 mm BSC .079 in 1 E2 EXPOSED PAD WIDTH 0.624 +/-0.1 mm .025 +/-.004 in 1 E4 PAD END TO CENTERLINE 0.662 +/-0.1 mm .026 +/-.004 in 1 .014 +/-.006 in 1 L TERMINAL LENGTH 0.355 +/-.14 mm L2 TERMINAL PAST BODY LENGTH 0.063 mm REF .03 in 1 L3 TERMINAL PAST BODY WIDTH 0.063 mm REF .03 in 1 Notes: PRIMARY DIMENSIONS ARE IN METRIC MILLIMETERS. THE ENGLISH EQUIVALENTS ARE CALCULATED AND SUBJECT TO ROUNDING ERROR. Additional Information For latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info_wireless@tqs.com Tel: (503) 615-9000 Fax: (503) 615-8900 For technical questions and additional information on specific applications: Email: info_wireless@tqs.com The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. TriQuint does not authorize or warrant any TriQuint product for use in life-support devices and/or systems. Copyright (c) 1998 TriQuint Semiconductor, Inc. All rights reserved.Revision A, October, 2001 For additional information and latest specifications, see our website: www.triquint.com 6