SPEC NO: DSAI4088 REV NO: V.6A DATE: APR/10/2013 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1351000562
SURFACE MOUNT DISPLAY
Part Number: KCSC08-107-A
Super Bright Yellow
Features
z0.8 inch digit height.
zLow current operation.
zExcellent character appearance.
zMechanically rugged.
zGray face, white segment.
zPackage: 200pcs/ reel
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
SYK
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAI4088 REV NO: V.6A DATE: APR/10/2013 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1351000562
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
KCSC08-107-A Super Bright Yellow (AlGaInP) White Diffused
31000 93000
*14000 *30000
Common Cathode, Rt.
Hand Decimal.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Yellow 590 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA
C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA
IR Reverse Current Super Bright Yellow 10 uA VR=5V
Parameter Super Bright Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 175 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAI4088 REV NO: V.6A DATE: APR/10/2013 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1351000562
Super Bright Yellow KCSC08-107-A
SPEC NO: DSAI4088 REV NO: V.6A DATE: APR/10/2013 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1351000562
KCSC08-107-A
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAI4088 REV NO: V.6A DATE: APR/10/2013 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1351000562
PACKING & LABEL SPECIFICATIONS KCSC08-107-A
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
