ECO-PACTM 1 Single Phase Half Controlled PSBZ 36 IdAV = 36 A VRRM Rectifier Bridge = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Type PSBZ PSBZ PSBZ PSBZ PSBZ 36/06 36/08 36/12 36/14 36/16 Symbol Test Conditions I*dAV ITRMS ITAVM ITSM TC = 85 C, i2 dt (di/dt)cr Maximum Ratings (per module) 36 A 31 A TC = 85 C, 180 sine, per thyristor 40 A TVJ = 45 C t = 10 ms (50 Hz), sine 320 A VR = 0 t = 8.3 ms (60 Hz), sine 350 A TVJ = TVJM t = 10 ms (50 Hz), sine 280 A VR = 0 t = 8.3 ms (60 Hz), sine 310 A TVJ = TVJM TVJ = 45 C t = 10 ms (50 Hz), sine 500 As VR = 0 t = 8.3 ms (60 Hz), sine 520 As TVJ = TVJM t = 10 ms (50 Hz), sine 390 As VR = 0 t = 8.3 ms (60 Hz), sine 400 As TVJ = TVJM repetitive, IT = 50 A 150 A/s f=50Hz, tP=200s VD=2/3VDRM IG=0.15 A non repetitive, IT =1/2 . IdAV 500 A/s 1000 V/s diG/dt=0.15 A/s (dv/dt)cr TVJ = TVJM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = TVJM tP=30s 10 W IT = ITAVM tP=500s 5 W tP= 10ms 1 W 0.5 W 10 V -40... + 125 125 C C -40... + 125 C 50/60 Hz, RMS t = 1 min 2500 V IISOL 1 mA 3000 V 1.5 - 1.8 14 - 16 16 Nm lb.in. g Md Mounting torque Weight typ. * * * * * * Package with DCB ceramic base plate Isolation voltage 3600 V Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications * * * * Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages VD=2/3VDRM RGK= , method 1 (linear voltage rise) PGM Features t=1s (M4) * * * * * Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated *for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ ECO-PACTM 1 Symbol Test Conditions ID,IR TVJ = TVJM, VR = VRRM, VD=VDRM TVJ = 25C VT VTO rT VGT IGT VGD IGD IL IT = 45 A, TVJ = 25 C 5 mA 0.3 mA 1.45 V 0.85 V For power-loss calculations only (TVJ = TVJM) 13 m TVJ = 25C 1.0 V TVJ = -40C 1.2 V TVJ = 25C 65 mA TVJ = -40C 80 mA TVJ =125C 50 mA TVJ= TVJM VD=2/3VDRM 0.2 V TVJ= TVJM VD=2/3VDRM VD = 6V VD = 6V 5 mA TG=30s, IG=0.3A, TVJ = 25C 150 mA diG/dt=0.1A/s 200 mA TVJ = -40 C 100 mA TVJ= 25C, VD=6V, RGK= 100 mA TVJ= 25C, VD=1/2VDRM 2 s 1.4 0.35 2.0 K/W K/W K/W 0.5 K/W 12.6 6.3 50 mm mm m/s TVJ = 125C IH tgd Characteristic Value IG = 0.3 A, diG/dt= 0.3 A/s RthJC RthJK per thyristor; DC per module per thyristor; DC per module ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Package style and outline Dimensions in mm (1mm = 0.0394") 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/