Single Phase PSBZ 36 IdAV = 36 A
Half Controlled VRRM = 600-1600 V
Rectifier Bridge
Features
•Package with DCB ceramic base plate
•Isolation voltage 3600 V∼
•Planar glass passivated chips
•Low forward voltage drop
•Leads suitable for PC board
soldering
•UL registered, E 148688
Applications
•Supplies for DC power equipment
•Imput rectifier for PWM inverter
•Battery DC power supplies
•Field supply for DC motors
Advantages
•Easy to mount with two screws
•Space and weight savings
•Improved temperature and power
cycling capability
•High power density
•Small and light weight
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 1
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
*for resistive load at bridge output
Preliminary Data Sheet
VRSM VRRM Type
VDSM VDRM
(V) (V)
700 600 PSBZ 36/06
900 800 PSBZ 36/08
1300 1200 PSBZ 36/12
1500 1400 PSBZ 36/14
1700 1600 PSBZ 36/16
Symbol Test Conditions Maximum Ratings
I*dAV TC = 85 °C, (per module) 36 A
ITRMS TVJ = TVJM 31 A
ITAVM TC = 85 °C, 180° sine, per thyristor 40 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 320 A
VR = 0 t = 8.3 ms (60 Hz), sine 350 A
TVJ = TVJM t = 10 ms (50 Hz), sine 280 A
VR = 0 t = 8.3 ms (60 Hz), sine 310 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 500 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 520 A²s
TVJ = TVJM t = 10 ms (50 Hz), sine 390 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 400 A²s
(di/dt)cr TVJ = TVJM repetitive, IT = 50 A 150 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.15 A non repetitive, IT =1/2 . IdAV 500 A/µs
diG/dt=0.15 A/µs
(dv/dt)cr TVJ = TVJM VD=2/3VDRM 1000 V/µs
RGK= ∞, method 1 (linear voltage rise)
PGM TVJ = TVJM tP=30µs ≤10 W
IT = ITAVM tP=500µs ≤5W
tP= 10ms ≤1W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 125 °C
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V∼
IISOL ≤ 1 mA t = 1 s 3000 V∼
MdMounting torque (M4) 1.5 - 1.8 N m
14 - 16 lb.in.
Weight typ. 16 g
http://store.iiic.cc/
ECO-PACTM 1
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Symbol Test Conditions Characteristic Value
ID,IRTVJ = TVJM, VR = VRRM, VD=VDRM ≤5mA
TVJ = 25°C ≤0.3 mA
VTIT = 45 A, TVJ = 25 °C ≤1.45 V
VTO For power-loss calculations only (TVJ = TVJM)0.85 V
rT13 mΩ
VGT VD = 6V TVJ = 25°C ≤1.0 V
TVJ = -40°C ≤1.2 V
IGT VD = 6V TVJ = 25°C ≤65 mA
TVJ = -40°C ≤80 mA
TVJ =125°C ≤50 mA
VGD TVJ= TVJM VD=2/3VDRM ≤0.2 V
IGD TVJ= TVJM VD=2/3VDRM ≤5mA
ILTG=30µs, IG=0.3A, TVJ = 25°C ≤150 mA
diG/dt=0.1A/µs TVJ = -40 °C ≤200 mA
TVJ = 125°C ≤100 mA
IHTVJ= 25°C, VD=6V, RGK= ∞≤100 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤2µs
IG = 0.3 A, diG/dt= 0.3 A/µs
RthJC per thyristor; DC 1.4 K/W
per module 0.35 K/W
RthJK per thyristor; DC 2.0 K/W
per module 0.5 K/W
dsCreeping distance on surface 12.6 m m
dACreeping distance in air 6.3 m m
aMax. allowable acceleration 50 m/s²
Package style and outline
Dimensions in mm (1mm = 0.0394“)
http://store.iiic.cc/
