05.10.2012Page1/7

Type 3 surge protection connector-PT 2-PE/S-230AC-

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

Type 3 arrester replacement connector (device protection) for 1-phase power supply networks with

separate N and PE (3-conductor system: L1, N, PE).

DIN rail module

For single and multi-phase power supply units

 

Key commercial data

Packing unit 1

Minimum order quantity 10

Catalog page Page 52 (TT-2011)

Custom tariff number 85363090

Country of origin GERMANY

Standards for air and creepage distances IEC 60664-1

Surge voltage category III

Pollution degree 2

05.10.2012Page2/7

Type 3 surge protection connector-PT 2-PE/S-230AC-

Technical data

Degree of protection IP20

Design Plug component

Mounting type On base element

Number of positions 2

Ambient temperature (operation) -40 °C ... 85 °C (non-EX)

Depth 52 mm

Pitch unit 1 Div.

Protective circuit

IEC category III

IEC category T3

EN type T3

Nominal voltage UN 230 V AC

Arrester rated voltage UC 253 V AC

Nominal frequency fN 50 Hz

Nominal frequency fN 60 Hz

Protection level UP (N-PE) ≤ 1.5 kV

Residual voltage at In, (L-N) ≤ 1.1 kV

Residual voltage at In, (L-PE) ≤ 600 V

Residual voltage at In, (N-PE) ≤ 600 V

Response time tA (L-N) ≤ 25 ns

Response time tA (L-PE) ≤ 100 ns

Response time tA (N-PE) ≤ 100 ns

Max. required back-up fuse 25 A (gL)

Max. required back-up fuse 25 A (MCB 25 A B/C)

Short-circuit resistance IP with max. backup fuse (effective) 1.5 kA

05.10.2012Page3/7

Type 3 surge protection connector-PT 2-PE/S-230AC-

Technical data

Standard - Electrical safety UL 1449 ed. 2

eCl@ss 4.0 27140201

eCl@ss 4.1 27130801

eCl@ss 5.0 27130801

eCl@ss 5.1 27130801

eCl@ss 6.0 27130806

eCl@ss 7.0 27130806

ETIM 2.0 EC000942

ETIM 3.0 EC000942

ETIM 4.0 EC000942

UL Recognized / KEMA-KEUR / ÖVE / cUL Recognized / GOST / CSA / CCA / IECEE CB Scheme / cULus Recognized

Ex Approvals

UL Recognized / cUL Recognized / cULus

Approvals submitted

Approval details

05.10.2012Page4/7

Type 3 surge protection connector-PT 2-PE/S-230AC-

UL Recognized

cULus Recognized

Marker pen-X-PEN 0,35-0811228

Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line

thickness 0.35 mm

05.10.2012Page5/7

Type 3 surge protection connector-PT 2-PE/S-230AC-

Zack Marker strip, flat-ZBF 5:UNBEDRUCKT-0808642

marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm

Zack Marker strip, flat-ZBF 5,LGS:FORTL.ZAHLEN-0808671

Zack Marker strip, flat, Strip, white, Labeled, Printed horizontally:Consecutive numbers 1 - 10, 11 - 20, etc.

up to 491 - 500, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field:

5.15 x 5.15 mm

Zack Marker strip, flat-ZBF 5,LGS:GERADE ZAHLEN-0810821

Zack Marker strip, flat, Strip, white, Labeled, Printed horizontally:Odd numbers 1 - 19, 21 - 39, etc. up to

81 - 99, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x

5.15 mm

05.10.2012Page6/7

Type 3 surge protection connector-PT 2-PE/S-230AC-

Zack Marker strip, flat-ZBF 5,QR:FORTL.ZAHLEN-0808697

Zack Marker strip, flat, Strip, white, Labeled, Printed vertically:Consecutive numbers 1 - 10, 11 - 20, etc.

up to 91 - 100, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field:

5.15 x 5.15 mm

groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm

05.10.2012Page7/7