https://www.phoenixcontact.com/us/produkte/2839347 Type 3 surge protection connector - PT 2-PE/S-230ACST - 2839347 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Type 3 arrester replacement connector (device protection) for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE). Why buy this product Plugs can be checked with CHECKMASTER Tool-free plug replacement With floating remote indication contact Optical signaling of disconnection via LED Consists of base element and plug DIN rail module For single and multi-phase power supply units Key commercial data Packing unit 1 Minimum order quantity 10 Catalog page Page 52 (TT-2011) GTIN Custom tariff number 85363090 Country of origin GERMANY Technical data Standards Housing material PA 6.6 Inflammability class according to UL 94 V0 Color black Standards for air and creepage distances DIN VDE 0110-1 Standards for air and creepage distances IEC 60664-1 Surge voltage category III Pollution degree 2 05.10.2012 Page 1 / 7 https://www.phoenixcontact.com/us/produkte/2839347 Type 3 surge protection connector - PT 2-PE/S-230ACST - 2839347 Technical data Standards Degree of protection IP20 Design Plug component Mounting type On base element Number of positions 2 Ambient temperature (operation) -40 C ... 85 C (non-EX) Ambient temperature (operation) -40 C ... 80 C (Class I Div. 2 Gr. A, B, C, D) Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.00 Direction of action 1L-N & N-PE Width 17.7 mm Height 45 mm Depth 52 mm Pitch unit 1 Div. Protective circuit IEC category III IEC category T3 EN type T3 Nominal voltage UN 230 V AC Arrester rated voltage UC 253 V AC Nominal frequency fN 50 Hz Nominal frequency fN 60 Hz Nominal current IN 26 A (30 C) Ground conductor current IPE 2.5 A Nominal discharge surge current In (8/20) s 3 kA Combined surge UOC 6 kV Protection level UP (L-N) 1.1 kV Protection level UP (L-PE) 1.5 kV Protection level UP (N-PE) 1.5 kV Residual voltage at In, (L-N) 1.1 kV Residual voltage at In, (L-PE) 600 V Residual voltage at In, (N-PE) 600 V Response time tA (L-N) 25 ns Response time tA (L-PE) 100 ns Response time tA (N-PE) 100 ns Max. required back-up fuse 25 A (gL) Max. required back-up fuse 25 A (MCB 25 A B/C) Short-circuit resistance IP with max. backup fuse (effective) 1.5 kA Message: Surge protection fault Optical Standards Standard - Electrical safety IEC 61643-1 2005 Standard - Electrical safety EN 61643-11/A11 2007 05.10.2012 Page 2 / 7 https://www.phoenixcontact.com/us/produkte/2839347 Type 3 surge protection connector - PT 2-PE/S-230ACST - 2839347 Technical data Standards Standard - Electrical safety UL 1449 ed. 2 Classifications eclass eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130806 eCl@ss 7.0 27130806 etim ETIM 2.0 EC000942 ETIM 3.0 EC000942 ETIM 4.0 EC000942 unspsc UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Recognized / KEMA-KEUR / OVE / cUL Recognized / GOST / CSA / CCA / IECEE CB Scheme / cULus Recognized Ex Approvals UL Recognized / cUL Recognized / cULus Approvals submitted Approval details 05.10.2012 Page 3 / 7 https://www.phoenixcontact.com/us/produkte/2839347 Type 3 surge protection connector - PT 2-PE/S-230ACST - 2839347 Approvals UL Recognized KEMA-KEUR OVE cUL Recognized GOST CSA CCA IECEE CB Scheme cULus Recognized Accessories Accessories Marking Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm 05.10.2012 Page 4 / 7 https://www.phoenixcontact.com/us/produkte/2839347 Type 3 surge protection connector - PT 2-PE/S-230ACST - 2839347 Accessories Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm Zack Marker strip, flat - ZBF 5/WH-100:UNBEDRUCKT - 0808668 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, Labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, Labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, Labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm 05.10.2012 Page 5 / 7 https://www.phoenixcontact.com/us/produkte/2839347 Type 3 surge protection connector - PT 2-PE/S-230ACST - 2839347 Accessories Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, Labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, For terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 18 mm, Lettering field: 18 x 5 mm Necessary add-on products Type 3 surge protection base element - PT-BE/FM - 2839282 Base element for protective plug PT, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm Drawings Dimensioned drawing Circuit diagram 90 L 5 6 L 44,8 11 J 12 OUT 51,5 65,5 IN N N 1 2 PE 3 4 PE The circuit diagram shows the complete module, consisting of a base element and connector The figure shows the complete module consisting of a base element and connector 05.10.2012 Page 6 / 7 https://www.phoenixcontact.com/us/produkte/2839347 (c) Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 05.10.2012 Page 7 / 7