
Product catalogue | Electronics | Power supplies | Primary switched-mode power supply unit | Connect Power single-
phase
- 2 -
output
Max. capacitance at output 10000 µF
Max. connection range AWG26-12 (0.1-4.0 mm²)
Max. output power 300 W
Max. residual ripple at 100 kHz: 2 mV At 120 Hz: 20 mV AC
Monitoring function Output voltage, current, temperature
Output current 12.5 A
Output voltage 22...28 V DC adjustable
Overload protection Overload current and surge protection
Parallel connection option Yes, max. 5 devices, active current splitting
Signalling delay 2 s
Status relay / CO contact 1 CO contact, closed-circuit current principle
Voltage stability at 115 V AC 40 ms
Voltage stability at 230 V AC 40 ms
General data
DIN Rail compatibility TS 35
Degree of efficiency at max. load 80 %
Derating Derating: 20% @ 60°C
EMC standards EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Housings metal
Low Voltage Directive 73/ 23/ EWG
Making time at 115 Vac 1.5 ms
Power factor correction PFC passive
Standards EN 50178, EN 60950, IEC950
Status indication Current limiting: LED yellow / Error: LED red/ On:
LED green
Switching frequency 100 kHz
Turn-on time at 230 Vac 0.7 ms
Weight 1,180 g
Ambient temperature (operational) -15°C...+50°C (at 100% duty cycle)
Storage temperature -40 °C...+85 °C
Insulation coordination
Galvanic isolation, I/O rail 4 kV
Galvanic isolation, input-earth 1.5 kV
Galvanic isolation, input-output 3 kV
Galvanic isolation, output-earth 0.5 kV
Humidity at operating temperature 20 - 85% RH without condensation
Humidity at storage temperature 20 to 90% RH without condensation
Insulation strength I/O: 3000 V rms, I/O: TS:4000 V rms, Input/PE:
2500 V rms, Output/PE: 500 V rms
Protection class IP 20
Approvals
Approvals institutes