MR2535L AUTOMOTIVE TRANSIENT
V
OLTAGE SUPPRESSO
R
VBR : 20 Volts
Io : 35 Amperes
FEATURES :
* Avalanche Voltage 24 to 32 Volts
* High Power capability
* Increased Capacity by Parallel Operation
* Pb / RoHS Free
MECHANICAL DATA :
* Case : molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 2.049 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL VALUE UNIT
Maximum DC Peak Repetitive Reverse Voltage VRRM 20 V
Maximum Working Peak Reverse Voltage VRWM 20 V
Maximum DC Blocking Voltage VR20 V
Maximum Breakdown Voltage ( IR = 100 mA, Tc = 25 °C ) (1) VBR(max) 32 V
Minimum Breakdown Voltage ( IR = 100 mA, Tc = 25 °C ) (1) VBR(min) 24 V
Maximum Average Rectified Forward Current
( Single Phase, Resistive Load, 60 Hz, Tc = 150 °C )
Maximum Repetitive Peak Reverse Surge Current
( Time Constant = 10 ms, Duty Cycle ≤ 1%, Tc = 25 °C )
Maximum Non-Repetitive Peak Surge Current
Surge Supplied at Rated Load Conditions, Halfwave, Single Phase
Maximum Instantaneous Forward Voltage (IF = 100 A Tc = 25 °C) (1) VF1.1 V
Maximum Reverse Current ( VR = 20 V, Tc = 25 °C ) IR200 nA
Typical Thermal Resistance Junction to Case RӨJC 0.8 °C/W
Junction Temperature Range TJ - 65 to + 175 °C
Storage Temperature Range TSTG - 65 to + 175 °C
Note : (1) Pulse Test : Pulse Width ≤ 300μs, Duty Cycle ≤ 2%.
Page 1 of 3 Rev. 04 : February 25, 2008
RATING
IF(AV) 35 A
A110
IRSM
IFSM 600 A
Dimensions in inches and ( millimeters )
D6
0.360 (9.1)
0.340 (8.6)
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.048 (1.22)
1.00 (25.4)
MIN.
1.00 (25.4)
MIN.
IATF 0060636
SGS TH07/1033
TW00/17276EM
TH97/10561QM
RATING AND CHARACTERISTIC CURVES ( MR2535L )
FIG.1 - TYPICAL FORWARD VOLTAGE FIG.2 - TYPICAL REVERSE CURRENT VS.
JUNCTION TEMPERATURE
FIG.3 - TYPICAL CAPACITANCE FIG.4 - MAXIMUM CURRENT RATINGS
FIG.5 - THERMAL RESPONSE FIG.6 - STEADY STATE THERMAL RESISTANCE
Page 2 of 3 Rev. 04 : February 25, 2008
IATF 0060636
SGS TH07/1033
TW00/17276EM
TH97/10561QM
RATING AND CHARACTERISTIC CURVES ( MR2535L )
FIG.7 - MAXIMUM PEAK REVERSE CURRENT FIG.8 - MAXIMUM PEAK REVERSE POWER
FIG.9 - MAXIMUM REVERSE ENERGY FIG.10 - REVERSE POWER DERATING
FIG.11 - TYPICAL CLAMPING FACTOR FIG.12 - LOAD DUMP PULSE CURRENT
Page 3 of 3 Rev. 04 : February 25, 2008
IATF 0060636
SGS TH07/1033
TW00/17276EM
TH97/10561QM
