CY3271-EXP1 ENVIRONMENTAL SENSING KIT
QUICK START GUIDE
The Environmental Sensing Kit requires the CY3271 Kit for operation. This quick start guide
assumes you are familiar with the CY3271, its operation, and programming of PSoC devices. If not,
refer to the users guide on the CD.
Install all software in the CY3271 kit. Program the RF Expansion board with
RF_I2C_Bridge.hex from the CD.
Connect the battery board, RF Expansion
board, and the Weather Station board.
Launch Sense and Control Dashboard and
‘bind’ the RF Expansion board.
Click 'Load Node configuration from a file'
and select Weather_Station_Dashboard_
Configuration.xml from the CD.
Monitor, chart, and record data from all
sensors. See the user guide for other
CY3271 projects.
1
2
3
A
D
B
C
4
5
6
© 2008-2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. DOC#: 001-49260 REV. *A
www.cypress.com/go/CY3271-EXP1
For the latest information about this kit, visit
CY3271-EXP1 ENVIRONMENTAL SENSING KIT
QUICK START GUIDE
Humidity Sensor
Thermistor
Application PSoC Device
(on reversie side)
Ambient Light
Sensor
Atmospheric
Pressure Sensor
Pigtail
Thermistor
Application
PSoC Device (on
reverse side)
Push Buttons
and LEDs
On/Off Switch
Target Board
Jumper
AAA Battery Pack
Weather Station Expansion Board Pigtail Thermistor Expansion Board
PC Dongle
CY3271 Hardware (Required for Operation)
Expansion Connector
RF Expansion Board
20 dBm RF
General Purpose
Push Button
Programming
PSoC
Application
PSoC
Programming
Interface
and
Connector
Expansion
Connector
Thermistor
Programming and
Interface Connecto
+20 dBm RF
