Product Specifications V5PDR-RPC 716 DIN Male Right Angle OnePieceTM for 7/8 in VXL550 cable CHARACTERISTICS General Specifications Interface 716 DIN Male Body Style Right angle Brand HELIAX(R) | OnePieceTM Mounting Angle Right angle Electrical Specifications Connector Impedance 50 ohm Operating Frequency Band 0 - 5000 MHz Cable Impedance 50 ohm 3rd Order IMD, typical 113 dBm @ 910 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 1415.00 V dc Test Voltage 4000 V Outer Contact Resistance, maximum 1.50 mOhm Inner Contact Resistance, maximum 0.80 mOhm Insulation Resistance, minimum 5000 MOhm Average Power 2.3 kW @ 900 MHz Peak Power, maximum 40.00 kW Insertion Loss, typical 0.05 dB Shielding Effectiveness 130 dB (c)2011 CommScope, Inc. All rights reserved. All trademarks identified by (R) or TM are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 1 of 3 6/9/2011 Product Specifications V5PDR-RPC Outline Drawing Mechanical Specifications Outer Contact Attachment Method Ball clamp Inner Contact Attachment Method Captivated Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 500 cycles Interface Durability Method IEC 6116916:9.5 Connector Retention Tensile Force 890 N | 200 lbf Connector Retention Torque 8.13 Nm | 72.00 in lb Insertion Force 200.17 N | 45.00 lbf Insertion Force Method IEC 611691:15.2.4 Pressurizable No Coupling Nut Proof Torque 24.86 Nm | 220.00 in lb Coupling Nut Retention Force 1000.85 N | 225.00 lbf Coupling Nut Retention Force Method MILC39012C3.25, 4.6.22 (c)2011 CommScope, Inc. All rights reserved. All trademarks identified by (R) or TM are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 2 of 3 6/9/2011 Product Specifications V5PDR-RPC Dimensions Nominal Size 7/8 in Diameter 37.21 mm | 1.47 in Length 93.47 mm | 3.68 in Right Angle Length 35.00 mm | 1.38 in Weight 456.00 g | 1.01 lb Width 36.32 mm | 1.43 in Environmental Specifications Operating Temperature 55 C to +85 C (67 F to +185 F) Storage Temperature 55 C to +85 C (67 F to +185 F) Immersion Depth 1m Immersion Test Mating Unmated Immersion Test Method IEC 60529:2001, IP68 Water Jetting Test Mating Unmated Water Jetting Test Method IEC 60529:2001, IP66 Moisture Resistance Test Method MILSTD202F, Method 106F Mechanical Shock Test Method MILSTD202F, Method 213B, Test Condition C Thermal Shock Test Method MILSTD202F, Method 107G, Test Condition A1, Low Temperature 55 C Vibration Test Method MILSTD202F, Method 204D, Test Condition B Corrosion Test Method MILSTD1344A, Method 1001.1, Test Condition A Standard Conditions Attenuation, Ambient Temperature 20 C | 68 F Average Power, Ambient Temperature 40 C | 104 F Return Loss/VSWR Frequency Band 824-960 MHz 1710-1880 MHz 1850-1990 MHz 1910-2200 MHz 2200-2700 MHz VSWR 1.02 1.02 1.02 1.03 1.06 Return Loss (dB) 40.00 39.00 39.00 37.50 30.20 Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system * Footnotes Immersion Depth Immersion at specified depth for 24 hours Insertion Loss, typical 0.05freq (GHz) (not applicable for elliptical waveguide) (c)2011 CommScope, Inc. All rights reserved. All trademarks identified by (R) or TM are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 3 of 3 6/9/2011