55PC0811-8-9 - TE Connectivity / Raychem

Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.

TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notificati on to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN A CCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE

ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 2

Raychem, TE Connectivity, and TE connectivity (logo) are trademarks.

Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-522-6752

Fax: 1-650-361-6297

DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL B E OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

Title SPECIFICATION CONTROL DRAWING SCD 55PC0811

WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,

NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT Date 6-21-17 Revision G

This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

CONDUCTOR - TIN-COATED COPPER INSULATION - RADIATION-CROSSLINKED,

MODIFIED ETFE

CONSTRUCTION DETAILS

PART NUMBER

WIRE

SIZE

(AWG)

CONDUCTOR

STRANDING

(number x AWG)

DIAMETER OF

STRANDED CONDUCTOR

(inch)

FINISHED WIRE

MAXIMUM

RESISTANCE

AT 20°C

(ohms/1000 ft.)

DIAMETER

(inch) WEIGHT

(lbs/1000 ft.)

LOWER

SPEC LIMIT TARGET

VALUE UPPER

SPEC LIMIT LOWER

SPEC LIMIT TARGET

VALUE UPPER

SPEC LIMIT TARGET

VALUE UPPER

SPEC LIMIT

55PC0811-26-* 26 19 x 38 .0175 .0183 .0191 41.3 .0366 .0385 .0404 1.55 1.70

55PC0811-24-* 24 19 x 36 .0225 .0233 .0241 26.2 .0416 .0435 .0454 2.18 2.34

55PC0811-22-* 22 19 x 34 .0285 .0293 .0301 16.2 .0476 .0495 .0514 3.12 3.30

55PC0811-20-* 20 19 x 32 .0365 .0375 .0385 9.88 .0561 .0580 .0599 4.64 4.85

55PC0811-18-* 18 19 x 30 .0452 .0464 .0476 6.23 .0659 .0680 .0701 6.94 7.27

55PC0811-16-* 16 19 x 29 .0514 .0527 .0538 4.81 .0737 .0760 .0783 8.80 9.17

55PC0811-14-* 14 19 x 27 .0644 .0659 .0674 3.06 .0896 .0920 .0944 13.50 13.99

55PC0811-12-* 12 37 x 28 .0825 .0845 .0865 2.02 .1076 .1105 .1134 20.45 21.08

55PC0811-10-* 10 37 x 26 .1050 .1070 .1090 1.26 .1290 .1330 .1370 31.73 32.78

55PC0811-8-* 8 133 x 29 .158 .163 .169 .701 .188 .196 .203 56.8 59.9

55PC0811-6-* 6 133 x 27 .198 .205 .212 .445 .233 .242 .251 89.7 94.7

55PC0811-4-* 4 133 x 25 .250 .260 .268 .280 .300 .311 .322 146. 154.

55PC0811-2-* 2 665 x 30 .320 .330 .340 .183 .370 .383 .397 227. 240.

55PC0811-0-* 0 1045 x 30 .395 .415 .425 .116 .449 .466 .483 343. 366.

55PC0811-00-* 00 1330 x 30 .440 .462 .475 .091 .505 .525 .545 450. 481.

55PC0811-000-* 000 1665 x 30 .515 .528 .540 .071 .568 .590 .612 559. 599.

55PC0811-0000-* 0000 2109 x 30 .565 .595 .605 .056 .646 .670 .694 684. 735.

SPECIFICATION CONTROL DRAWING Page

2 of 2

Revision

SCD

55PC0811

WIRE RATINGS AND ADDITIONAL RE QUIREMENTS

TEMPERATURE RATING: 150°C

Maximum continuous conductor tempe rature

VOLTAGE RATING: 600 volts (rms) at sea level

COLOR: White preferred

CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour

IDENTIFICATION AND COLOR STRIPING DURABILITY:

125 cycles (250 strokes) (minimum), 500 g weight

INSULATION ELONGATION AND TENSILE STRENGTH:

Total Insulation,

Elongation, 50% (minimum)

Tensile Strength, 5000 lbf/in2 (minimum)

INSULATION FLAWS:

Spark Test, 3.0 kV (rms)

Impulse Dielectric Test, 8.0 kV (peak)

INSULATION THICKNESS: .010 in. (nominal) total insulation

SHRINKAGE: 230 ± 3°C for 1 hour, 0. 125 inch (maximum) in 12 inches

VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms)

1/ PART NUMBER:

The "*" in the part numbers on page 1 shall be repl aced by a color code designator.

Example: AWG 22, white: 55PC0811-22-9

AWG 22, white with a black stripe: 55PC0811-22-90

1/ See footer section on page 1