MIL-PRF (CWR Style) Established Reliability T429 Series CWR29 Style MIL-PRF-55365/11 Overview The KEMET T429 series is approved to MIL-PRF-55365/11 (CWR29), with Weibull failure rates of B level (0.1% failures per 1,000 hours), C level (0.01% failures per 1,000 hours), or D level (0.001% failures per 1,000 hours). This CWR29 product is a precision-molded device, with compliant terminations and indelible laser marking. Tape and reeling per EIA 481-D is standard. Benefits Applications * * * * * * * * * * * Typical applications include decoupling and filtering in military and aerospace applications requiring CWR29 devices. Established reliability options Taped and reeled per EIA 481-D Symmetrical, compliant terminations Laser-marked case 100% surge current test available on all case sizes Qualified to MIL-PRF-55365/11, Style CWR29 Termination options B, C, H, K Weibull failure options B, C, and D Exponential failure rates M, P, R, S Voltage rating of 4 - 50 VDC Operating temperature range of -55C to +125C Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder. SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One WORLD One Brand One Strategy One Focus One Team (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com One KEMET T2003_T429 * 5/8/2012 1 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Ordering Information T 429 A 225 K 004 A H 4251 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/Design Lead Material Surge T= CWR29 A = 1005 First two digits Tantalum Established B = 1505 represent significant Reliability C = 2005 figures. Third digit D = 1510 specifies number of E = 2010 zeros. F = 2214 G = 2711 H = 2915 X = 282 J = 5% K = 10% M = 20% 004 = 4 V 006 = 6.3 V 010 = 10 V 015 = 15 V 020 = 20 V 025 = 25 V 035 = 35 V 050 = 50 V Weibull C = Hot Solder Dipped 4250= 25C after A = non-ER H = Standard Solder Weibull B = (0.1%/1,000 hours) Coated (SnPb 5% Pb 4251 = -55C and C = (0.01%/1,000 hours) minimum) 85C after Weibull D =(0.001%/1,000 hours) B = Gold Plated 4252 = -55C and Exponential K = Solder Fused 85C before Weibull M = (1.0%/1,000 hours) P = (0.1%/1,000 hours) R = (0.01%/1,000 hours) S =(0.001%/1,000 hours) Defense MIL-PRF-55365/11 Ordering Information CWR29 K H 225 Capacitor Style Voltage Termination Finish Capacitance Code (pF) Per MIL-PRF- 55365/11 C=4V D=6V F = 10 V H = 15 V J = 20 V K = 25 V M = 35 V N = 50 V B = Gold Plated C = Hot solder dipped H = Solder Plated K = Solder fused First two digits represent significant figures. Third digit specifies number of zeros. K C D A Capacitance Tolerance Reliability Level Case Code Surge Current Option Weibull A = non-ER B = (0.1%/1,000 hours) C = (0.01%/1,000 hours) D =(0.001%/1,000 hours) Exponential M = (1.0%/1,000 hours) P = (0.1%/1,000 hours) R = (0.01%/1,000 hours) S =(0.001%/1,000 hours) A, B, C, D, E, F, G, H, X A = +25C after Weibull B = -55C +85C after Weibull C = -55C +85C before Weibull Z = None J = 5% K = 10% M = 20% Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.1 - 330 F @ 120 Hz/25C J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) 4 - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at Rated Voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 2 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ rated voltage, 2,000 hours 125C @ 2/3 rated voltage, 2,000 hours 125C @ 0 Volts, 2,000 hours MIL-STD-202, Method 107, Condition B, mounted, -55C to 125C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Additional qualification tests per MIL-PRF-55365/11 Within 10% of initial value 25C and 85C, 1.32 x rated voltage 1,000 cycles (125C, 1.2 x rated voltage) MIL-STD-202, Method 213, Condition I, 100 G Peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits Please contact KEMET for more information. *IL = Initial limit Certification MIL-PRF-55365/11 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 3 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Electrical Characteristics ESR vs. Frequency Capacitance vs. Frequency 1000 100 T429C475/015 T429F336/015 T429F336/015_IMP T429H107/015_IMP T429C475/015_ESR Capacitance (F) Impedance, ESR (Ohms) T429H107/015 T429C475/015_IMP 100 T429F336/015_ESR 10 T429H107/015_ESR 1 10 1 0.1 0.01 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 0.1 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Case Size Component KEMET L* +/- 0.38 (.015) W* +/- 0.38 (.015) H* +/- 0.38 (.015) P +.025(.010), -0.13(.005) W2 A B C D E F G H X 2.54 (.100) 3.81 (.150) 5.08 (.200) 3.81 (.150) 5.08 (.200) 5.59 (.220) 6.73 (.265) 7.24 (.285) 6.93 (.273) 1.27 (.050) 1.27 (.050) 1.27 (.050) 2.54 (.100) 2.54 (.100) 3.43 (.135) 2.79 (.110) 3.81 (.150) 5.41 (.213) 1.27 (.050) 1.27 (.050) 1.27 (.050) 1.27 (.050) 1.27 (.050) 1.78 (.070) 2.79 (.110) 2.79 (.110) 2.74 (.108) 0.76 (.030) 0.76 (.030) 0.76 (.030) 0.76 (.030) 0.76 (.030) 0.76 (.030) 1.27 (.050) 1.27 (.050) 1.19 (.047) 1.27 +/- 0.13 (.050 +/- .005) 1.27 +/- 0.13 (.050 +/- .005) 1.27 +/- 0.13 (.050 +/- .005) 2.41 +.13, -.25 (.095 +.005, -.010) 2.41 +.13, -.25 (.095 +.005, -.010) 3.30 +/- 0.13 (.130 +/- .005) 2.67 +/- 0.13 (.105 +/- .005) 3.68 +.013, -0.51 (.145 + .005, - .020) 3.05 +/- 0.13 (.120 +/- .005) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 4 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Table 1 - Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity VDC F KEMET/EIA 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 15 22 22 33 33 33 47 68 68 100 100 150 220 330 1.5 3.3 3.3 4.7 4.7 6.8 6.8 10 10 15 15 15 22 22 22 33 47 47 68 68 68 100 150 220 330 1 A/1005 A/1005 A/1005 B/1505 A/1005 C/2005 B/1505 D/1510 B/1505 E/2010 B/1505 D/1510 D/1510 E/2010 F/2214 E/2010 E/2010 G/2711 F/2214 H/2915 G/2711 H/2915 H/2915 A/1005 A/1005 B/1505 A/1005 C/2005 B/1505 D/1510 B/1505 E/2010 B/1505 D/1510 E/2010 D/1510 E/2010 F/2214 E/2010 F/2214 G/2711 F/2214 G/2711 H/2915 G/2711 G/2711 H/2915 H/2915 A/1005 VDC F KEMET/EIA (See below for part options) T429A225(1)004(2)(3)(4) T429A335(1)004(2)(3)(4) T429A475(1)004(2)(3)(4) T429B475(1)004(2)(3)(4) T429A685(1)004(2)(3)(4) T429C685(1)004(2)(3)(4) T429B106(1)004(2)(3)(4) T429D106(1)004(2)(3)(4) T429B156(1)004(2)(3)(4) T429E156(1)004(2)(3)(4) T429B226(1)004(2)(3)(4) T429D226(1)004(2)(3)(4) T429D336(1)004(2)(3)(4) T429E336(1)004(2)(3)(4) T429F336(1)004(2)(3)(4) T429E476(1)004(2)(3)(4) T429E686(1)004(2)(3)(4) T429G686(1)004(2)(3)(4) T429F107(1)004(2)(3)(4) T429H107(1)004(2)(3)(4) T429G157(1)004(2)(3)(4) T429H227(1)004(2)(3)(4) T429H337(1)004(2)(3)(4) T429A155(1)006(2)(3)(4) T429A335(1)006(2)(3)(4) T429B335(1)006(2)(3)(4) T429A475(1)006(2)(3)(4) T429C475(1)006(2)(3)(4) T429B685(1)006(2)(3)(4) T429D685(1)006(2)(3)(4) T429B106(1)006(2)(3)(4) T429E106(1)006(2)(3)(4) T429B156(1)006(2)(3)(4) T429D156(1)006(2)(3)(4) T429E156(1)006(2)(3)(4) T429D226(1)006(2)(3)(4) T429E226(1)006(2)(3)(4) T429F226(1)006(2)(3)(4) T429E336(1)006(2)(3)(4) T429F476(1)006(2)(3)(4) T429G476(1)006(2)(3)(4) T429F686(1)006(2)(3)(4) T429G686(1)006(2)(3)(4) T429H686(1)006(2)(3)(4) T429G107(1)006(2)(3)(4) T429G157(1)006(2)(3)(4) T429H227(1)006(2)(3)(4) T429H337(1)006(2)(3)(4) T429A105(1)010(2)(3)(4) (See below for part options) (See below for part options) CWR29C(3)225(1)(2)A(5) CWR29C(3)335(1)(2)A(5) CWR29C(3)475(1)(2)A(5) CWR29C(3)475(1)(2)B(5) CWR29C(3)685(1)(2)A(5) CWR29C(3)685(1)(2)C(5) CWR29C(3)106(1)(2)B(5) CWR29C(3)106(1)(2)D(5) CWR29C(3)156(1)(2)B(5) CWR29C(3)156(1)(2)E(5) CWR29C(3)226(1)(2)B(5) CWR29C(3)226(1)(2)D(5) CWR29C(3)336(1)(2)D(5) CWR29C(3)336(1)(2)E(5) CWR29C(3)336(1)(2)F(5) CWR29C(3)476(1)(2)E(5) CWR29C(3)686(1)(2)E(5) CWR29C(3)686(1)(2)G(5) CWR29C(3)107(1)(2)F(5) CWR29C(3)107(1)(2)H(5) CWR29C(3)157(1)(2)H(5) CWR29C(3)227(1)(2)H(5) CWR29C(3)337(1)(2)H(5) CWR29D(3)155(1)(2)A(5) CWR29D(3)335(1)(2)A(5) CWR29D(3)335(1)(2)B(5) CWR29D(3)475(1)(2)A(5) CWR29D(3)475(1)(2)C(5) CWR29D(3)685(1)(2)B(5) CWR29D(3)685(1)(2)D(5) CWR29D(3)106(1)(2)B(5) CWR29D(3)106(1)(2)E(5) CWR29D(3)156(1)(2)B(5) CWR29D(3)156(1)(2)D(5) CWR29D(3)156(1)(2)E(5) CWR29D(3)226(1)(2)D(5) CWR29D(3)226(1)(2)E(5) CWR29D(3)226(1)(2)F(5) CWR29D(3)336(1)(2)E(5) CWR29D(3)476(1)(2)F(5) CWR29D(3)476(1)(2)G(5) CWR29D(3)686(1)(2)F(5) CWR29D(3)686(1)(2)G(5) CWR29D(3)686(1)(2)H(5) CWR29D(3)107(1)(2)G(5) CWR29D(3)157(1)(2)G(5) CWR29D(3)227(1)(2)H(5) CWR29D(3)337(1)(2)H(5) CWR29F(3)105(1)(2)A(5) (See below for part options) A @ +20C Max/5 Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 2.0 3.0 3.0 4.0 4.0 6.0 8.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 3.0 3.0 4.0 4.0 4.0 6.0 10.0 10.0 20.0 1.0 A @ +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 6.0 8.0 8.0 6.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 6.0 % @ +20C 120 Hz Max @ +20C 100 kHz Max 4.0 6.0 6.0 3.2 6.0 2.2 3.2 1.3 3.2 1.0 3.2 1.3 1.3 0.9 0.6 0.9 0.9 0.275 0.55 0.18 0.25 0.20 0.18 4.0 6.0 3.2 6.0 2.2 3.2 1.5 3.2 1.0 3.2 1.7 0.9 1.7 1.0 0.6 1.0 1.0 0.275 0.4 0.25 0.18 0.275 0.275 0.18 0.18 5.0 @ +20C 100 kHz Max Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity (1) To complete KEMET/CWR part number, insert M for 20%, K for 10%, or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish. (4) To complete KEMET part number, insert 4250 = +25C after Weibull, 4251 = -55C +85C after Weibull, or 4252 = -55C +85C before Weibull. Designates Surge current option. (5) To complete CWR part number, insert A = +25C after Weibull, B = -55C +85C after Weibull, C = -55C +85C before Weibull or Z = None. Designates Surge current option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2003_T429 * 5/8/2012 5 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 15 15 15 22 33 33 47 47 47 68 100 100 150 150 220 0.68 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 10 10 10 15 15 A/1005 B/1505 A/1005 C/2005 B/1505 C/2005 D/1510 B/1505 C/2005 D/1510 E/2010 B/1505 C/2005 D/1510 E/2010 D/1510 E/2010 F/2214 E/2010 F/2214 G/2711 F/2214 G/2711 H/2915 G/2711 G/2711 H/2915 H/2915 X/2824 H/2915 A/1005 A/1005 A/1005 B/1505 A/1005 C/2005 B/1505 D/1510 B/1505 C/2005 D/1510 E/2010 D/1510 E/2010 D/1510 E/2010 F/2214 E/2010 F/2214 VDC F KEMET/EIA (See below for part options) T429A225(1)010(2)(3)(4) T429B225(1)010(2)(3)(4) T429A335(1)010(2)(3)(4) T429C335(1)010(2)(3)(4) T429B475(1)010(2)(3)(4) T429C475(1)010(2)(3)(4) T429D475(1)010(2)(3)(4) T429B685(1)010(2)(3)(4) T429C685(1)010(2)(3)(4) T429D685(1)010(2)(3)(4) T429E685(1)010(2)(3)(4) T429B106(1)010(2)(3)(4) T429C106(1)010(2)(3)(4) T429D106(1)010(2)(3)(4) T429E106(1)010(2)(3)(4) T429D156(1)010(2)(3)(4) T429E156(1)010(2)(3)(4) T429F156(1)010(2)(3)(4) T429E226(1)010(2)(3)(4) T429F336(1)010(2)(3)(4) T429G336(1)010(2)(3)(4) T429F476(1)010(2)(3)(4) T429G476(1)010(2)(3)(4) T429H476(1)010(2)(3)(4) T429G686(1)010(2)(3)(4) T429G107(1)010(2)(3)(4) T429H107(1)010(2)(3)(4) T429H157(1)010(2)(3)(4) T429X157(1)010(2)(3)(4) T429H227(1)010(2)(3)(4) T429A684(1)015(2)(3)(4) T429A105(1)015(2)(3)(4) T429A155(1)015(2)(3)(4) T429B155(1)015(2)(3)(4) T429A225(1)015(2)(3)(4) T429C225(1)015(2)(3)(4) T429B335(1)015(2)(3)(4) T429D335(1)015(2)(3)(4) T429B475(1)015(2)(3)(4) T429C475(1)015(2)(3)(4) T429D475(1)015(2)(3)(4) T429E475(1)015(2)(3)(4) T429D685(1)015(2)(3)(4) T429E685(1)015(2)(3)(4) T429D106(1)015(2)(3)(4) T429E106(1)015(2)(3)(4) T429F106(1)015(2)(3)(4) T429E156(1)015(2)(3)(4) T429F156(1)015(2)(3)(4) (See below for part options) (See below for part options) CWR29F(3)225(1)(2)A(5) CWR29F(3)225(1)(2)B(5) CWR29F(3)335(1)(2)A(5) CWR29F(3)335(1)(2)C(5) CWR29F(3)475(1)(2)B(5) CWR29F(3)475(1)(2)C(5) CWR29F(3)475(1)(2)D(5) CWR29F(3)685(1)(2)B(5) CWR29F(3)685(1)(2)C(5) CWR29F(3)685(1)(2)D(5) CWR29F(3)685(1)(2)E(5) CWR29F(3)106(1)(2)B(5) CWR29F(3)106(1)(2)C(5) CWR29F(3)106(1)(2)D(5) CWR29F(3)106(1)(2)E(5) CWR29F(3)156(1)(2)D(5) CWR29F(3)156(1)(2)E(5) CWR29F(3)156(1)(2)F(5) CWR29F(3)226(1)(2)E(5) CWR29F(3)336(1)(2)F(5) CWR29F(3)336(1)(2)G(5) CWR29F(3)476(1)(2)F(5) CWR29F(3)476(1)(2)G(5) CWR29F(3)476(1)(2)H(5) CWR29F(3)686(1)(2)G(5) CWR29F(3)107(1)(2)G(5) CWR29F(3)107(1)(2)H(5) CWR29F(3)157(1)(2)H(5) CWR29F(3)157(1)(2)X(5) CWR29F(3)227(1)(2)H(5) CWR29H(3)684(1)(2)A(5) CWR29H(3)105(1)(2)A(5) CWR29H(3)155(1)(2)A(5) CWR29H(3)155(1)(2)B(5) CWR29H(3)225(1)(2)A(5) CWR29H(3)225(1)(2)C(5) CWR29H(3)335(1)(2)B(5) CWR29H(3)335(1)(2)D(5) CWR29H(3)475(1)(2)B(5) CWR29H(3)475(1)(2)C(5) CWR29H(3)475(1)(2)D(5) CWR29H(3)475(1)(2)E(5) CWR29H(3)685(1)(2)D(5) CWR29H(3)685(1)(2)E(5) CWR29H(3)106(1)(2)D(5) CWR29H(3)106(1)(2)E(5) CWR29H(3)106(1)(2)F(5) CWR29H(3)156(1)(2)E(5) CWR29H(3)156(1)(2)F(5) (See below for part options) A @ +20C Max/5 Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 3.0 3.0 3.0 4.0 4.0 5.0 6.0 10.0 10.0 15.0 15.0 20.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 2.0 2.0 A @ +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 8.0 % @ +20C 120 Hz Max @ +20C 100 kHz Max 6.0 3.2 6.0 2.2 3.2 2.2 1.5 3.2 2.2 1.7 1.0 3.2 2.2 1.3 1.0 1.7 0.9 0.7 0.6 0.4 0.275 0.4 0.25 0.18 0.275 0.275 0.18 0.18 0.065 0.18 6.0 7.5 7.5 3.2 7.5 2.2 3.6 1.7 2.0 2.2 2.0 1.2 2.0 0.9 2.0 1.2 0.667 1.2 0.8 @ +20C 100 kHz Max Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity (1) To complete KEMET/CWR part number, insert M for 20%, K for 10%, or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish. (4) To complete KEMET part number, insert 4250 = +25C after Weibull, 4251 = -55C +85C after Weibull, or 4252 = -55C +85C before Weibull. Designates Surge current option. (5) To complete CWR part number, insert A = +25C after Weibull, B = -55C +85C after Weibull, C = -55C +85C before Weibull or Z = None. Designates Surge current option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2003_T429 * 5/8/2012 6 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity VDC F KEMET/EIA 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 22 22 33 33 33 47 47 68 68 100 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 6.8 6.8 10 10 15 15 22 22 33 47 47 0.33 0.47 0.68 1 1 1.5 2.2 2.2 3.3 4.7 6.8 6.8 10 15 15 22 F/2214 G/2711 F/2214 G/2711 H/2915 G/2711 H/2915 G/2711 H/2915 H/2915 A/1005 A/1005 B/1505 A/1005 B/1505 B/1505 C/2005 B/1505 D/1510 D/1510 E/2010 E/2010 E/2010 F/2214 E/2010 F/2214 F/2214 G/2711 G/2711 H/2915 H/2915 H/2915 X/2824 A/1005 A/1005 B/1505 B/1505 C/2005 D/1510 D/1510 E/2010 E/2010 F/2214 F/2214 G/2711 G/2711 G/2711 H/2915 G/2711 VDC F KEMET/EIA (See below for part options) T429F226(1)015(2)(3)(4) T429G226(1)015(2)(3)(4) T429F336(1)015(2)(3)(4) T429G336(1)015(2)(3)(4) T429H336(1)015(2)(3)(4) T429G476(1)015(2)(3)(4) T429H476(1)015(2)(3)(4) T429G686(1)015(2)(3)(4) T429H686(1)015(2)(3)(4) T429H107(1)015(2)(3)(4) T429A474(1)020(2)(3)(4) T429A684(1)020(2)(3)(4) T429B684(1)020(2)(3)(4) T429A105(1)020(2)(3)(4) T429B105(1)020(2)(3)(4) T429B155(1)020(2)(3)(4) T429C155(1)020(2)(3)(4) T429B225(1)020(2)(3)(4) T429D225(1)020(2)(3)(4) T429D335(1)020(2)(3)(4) T429E335(1)020(2)(3)(4) T429E475(1)020(2)(3)(4) T429E685(1)020(2)(3)(4) T429F685(1)020(2)(3)(4) T429E106(1)020(2)(3)(4) T429F106(1)020(2)(3)(4) T429F156(1)020(2)(3)(4) T429G156(1)020(2)(3)(4) T429G226(1)020(2)(3)(4) T429H226(1)020(2)(3)(4) T429H336(1)020(2)(3)(4) T429H476(1)020(2)(3)(4) T429X476(1)020(2)(3)(4) T429A334(1)025(2)(3)(4) T429A474(1)025(2)(3)(4) T429B684(1)025(2)(3)(4) T429B105(1)025(2)(3)(4) T429C105(1)025(2)(3)(4) T429D155(1)025(2)(3)(4) T429D225(1)025(2)(3)(4) T429E225(1)025(2)(3)(4) T429E335(1)025(2)(3)(4) T429F475(1)025(2)(3)(4) T429F685(1)025(2)(3)(4) T429G685(1)025(2)(3)(4) T429G106(1)025(2)(3)(4) T429G156(1)025(2)(3)(4) T429H156(1)025(2)(3)(4) T429G226(1)025(2)(3)(4) (See below for part options) (See below for part options) CWR29H(3)226(1)(2)F(5) CWR29H(3)226(1)(2)G(5) CWR29H(3)336(1)(2)F(5) CWR29H(3)336(1)(2)G(5) CWR29H(3)336(1)(2)H(5) CWR29H(3)476(1)(2)G(5) CWR29H(3)476(1)(2)H(5) CWR29H(3)686(1)(2)G(5) CWR29H(3)686(1)(2)H(5) CWR29H(3)107(1)(2)H(5) CWR29J(3)474(1)(2)A(5) CWR29J(3)684(1)(2)A(5) CWR29J(3)684(1)(2)B(5) CWR29J(3)105(1)(2)A(5) CWR29J(3)105(1)(2)B(5) CWR29J(3)155(1)(2)B(5) CWR29J(3)155(1)(2)C(5) CWR29J(3)225(1)(2)B(5) CWR29J(3)225(1)(2)D(5) CWR29J(3)335(1)(2)D(5) CWR29J(3)335(1)(2)E(5) CWR29J(3)475(1)(2)E(5) CWR29J(3)685(1)(2)E(5) CWR29J(3)685(1)(2)F(5) CWR29J(3)106(1)(2)E(5) CWR29J(3)106(1)(2)F(5) CWR29J(3)156(1)(2)F(5) CWR29J(3)156(1)(2)G(5) CWR29J(3)226(1)(2)G(5) CWR29J(3)226(1)(2)H(5) CWR29J(3)336(1)(2)H(5) CWR29J(3)476(1)(2)H(5) CWR29J(3)476(1)(2)X(5) CWR29K(3)334(1)(2)A(5) CWR29K(3)474(1)(2)A(5) CWR29K(3)684(1)(2)B(5) CWR29K(3)105(1)(2)B(5) CWR29K(3)105(1)(2)C(5) CWR29K(3)155(1)(2)D(5) CWR29K(3)225(1)(2)D(5) CWR29K(3)225(1)(2)E(5) CWR29K(3)335(1)(2)E(5) CWR29K(3)475(1)(2)F(5) CWR29K(3)685(1)(2)F(5) CWR29K(3)685(1)(2)G(5) CWR29K(3)106(1)(2)G(5) CWR29K(3)156(1)(2)G(5) CWR29K(3)156(1)(2)H(5) CWR29K(3)226(1)(2)G(5) (See below for part options) A @ +20C Max/5 Min 3.0 4.0 5.0 6.0 5.0 10.0 10.0 10.0 10.0 15.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 2.0 3.0 3.0 4.0 4.0 6.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 3.0 4.0 4.0 6.0 A @ +20C Max/5 Min % @ +20C 120 Hz Max 8.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max @ +20C 100 kHz Max 0.8 0.3 0.8 0.3 0.2 0.3 0.2 0.3 0.2 0.2 7.5 7.5 5.6 7.5 4.8 3.6 2.4 3.6 1.7 2.0 1.2 1.7 1.5 0.7 1.5 0.8 0.8 0.275 0.625 0.18 0.18 0.18 0.11 7.5 7.5 4.0 4.0 2.6 1.7 2.0 1.0 1.2 0.7 0.8 0.3 0.35 0.35 0.2 0.35 @ +20C 100 kHz Max Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity (1) To complete KEMET/CWR part number, insert M for 20%, K for 10%, or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish. (4) To complete KEMET part number, insert 4250 = +25C after Weibull, 4251 = -55C +85C after Weibull, or 4252 = -55C +85C before Weibull. Designates Surge current option. (5) To complete CWR part number, insert A = +25C after Weibull, B = -55C +85C after Weibull, C = -55C +85C before Weibull or Z = None. Designates Surge current option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2003_T429 * 5/8/2012 7 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity VDC F KEMET/EIA 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 22 22 33 33 0.22 0.33 0.47 0.68 1 1.5 3.3 4.7 6.8 6.8 10 15 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 H/2915 X/2824 H/2915 X/2824 A/1005 A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 F/2214 H/2915 H/2915 X/2824 A/1005 A/1005 B/1505 B/1505 C/2005 D/1510 E/2010 F/2214 F/2214 G/2711 H/2915 VDC F KEMET/EIA (See below for part options) T429H226(1)025(2)(3)(4) T429X226(1)025(2)(3)(4) T429H336(1)025(2)(3)(4) T429X336(1)025(2)(3)(4) T429A224(1)035(2)(3)(4) T429A334(1)035(2)(3)(4) T429B474(1)035(2)(3)(4) T429C684(1)035(2)(3)(4) T429D105(1)035(2)(3)(4) T429E155(1)035(2)(3)(4) T429F335(1)035(2)(3)(4) T429G475(1)035(2)(3)(4) T429F685(1)035(2)(3)(4) T429H685(1)035(2)(3)(4) T429H106(1)035(2)(3)(4) T429X156(1)035(2)(3)(4) T429A104(1)050(2)(3)(4) T429A154(1)050(2)(3)(4) T429B224(1)050(2)(3)(4) T429B334(1)050(2)(3)(4) T429C474(1)050(2)(3)(4) T429D684(1)050(2)(3)(4) T429E105(1)050(2)(3)(4) T429F155(1)050(2)(3)(4) T429F225(1)050(2)(3)(4) T429G335(1)050(2)(3)(4) T429H475(1)050(2)(3)(4) (See below for part options) (See below for part options) CWR29K(3)226(1)(2)H(5) CWR29K(3)226(1)(2)X(5) CWR29K(3)336(1)(2)H(5) CWR29K(3)336(1)(2)X(5) CWR29M(3)224(1)(2)A(5) CWR29M(3)334(1)(2)A(5) CWR29M(3)474(1)(2)B(5) CWR29M(3)684(1)(2)C(5) CWR29M(3)105(1)(2)D(5) CWR29M(3)155(1)(2)E(5) CWR29M(3)335(1)(2)F(5) CWR29M(3)475(1)(2)G(5) CWR29M(3)685(1)(2)F(5) CWR29M(3)685(1)(2)H(5) CWR29M(3)106(1)(2)H(5) CWR29M(3)156(1)(2)X(5) CWR29N(3)104(1)(2)A(5) CWR29N(3)154(1)(2)A(5) CWR29N(3)224(1)(2)B(5) CWR29N(3)334(1)(2)B(5) CWR29N(3)474(1)(2)C(5) CWR29N(3)684(1)(2)D(5) CWR29N(3)105(1)(2)E(5) CWR29N(3)155(1)(2)F(5) CWR29N(3)225(1)(2)F(5) CWR29N(3)335(1)(2)G(5) CWR29N(3)475(1)(2)H(5) (See below for part options) A @ +20C Max/5 Min 6.0 6.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 3.0 4.0 6.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 A @ +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max @ +20C 100 kHz Max 0.18 0.16 0.18 0.13 12.0 12.0 6.8 4.0 2.2 1.3 0.7 0.375 0.375 0.5 0.5 0.19 12.0 12.0 6.8 4.8 3.2 2.3 1.7 1.1 0.7 0.5 0.5 @ +20C 100 kHz Max Reflow Temperature 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temperature 260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/11 Part Number DC Leakage DF ESR Moisture Sensitivity (1) To complete KEMET/CWR part number, insert M for 20%, K for 10%, or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish. (4) To complete KEMET part number, insert 4250 = +25C after Weibull, 4251 = -55C +85C after Weibull, or 4252 = -55C +85C before Weibull. Designates Surge current option. (5) To complete CWR part number, insert A = +25C after Weibull, B = -55C +85C after Weibull, C = -55C +85C before Weibull or Z = None. Designates Surge current option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2003_T429 * 5/8/2012 8 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Recommended Voltage Derating Guidelines 120% % Working Voltage 100% 80% % Change in Working DC Voltage with Temperature 60% 40% Recommended Maximum Application Voltage (As % of Rated Voltage) 20% 0% 67% -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Case Code KEMET A B C D E EIA 1005 1505 2005 1510 2010 F G H 2214 2711 2915 Maximum Power Dissipation (P max) mWatts @ 25C with +20C Rise 50 70 75 80 90 100 125 150 Temperature Compensation Multipliers for Maximum Power Dissipation 25C 1.00 85C 0.90 125C 0.40 T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 9 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 1005 1.45 2.15 1.20 5.60 2.70 1.35 1.85 1.05 4.50 2.20 1.25 1.55 0.90 3.60 1.90 B 1505 1.45 2.30 1.75 6.80 2.70 1.35 1.90 1.65 5.70 2.20 1.25 1.55 1.55 4.90 1.92 C 2005 1.45 2.30 2.40 8.10 2.70 1.35 1.90 2.30 7.00 2.20 1.25 1.55 2.15 6.10 1.90 D 1510 2.60 2.30 1.75 6.80 4.00 2.45 1.90 1.65 5.70 3.50 2.35 1.55 1.55 4.90 3.20 E 2010 2.60 2.30 2.40 8.10 4.00 2.45 1.90 2.30 7.00 3.50 2.35 1.55 2.15 6.10 3.20 F 2214 3.50 2.30 2.65 8.60 4.90 3.35 1.90 2.55 7.50 4.40 3.25 1.55 2.45 6.70 4.10 G 2711 2.85 2.80 2.95 9.70 4.20 2.75 2.40 2.85 8.60 3.70 2.65 2.05 2.75 7.80 3.40 H 2915 3.85 2.80 3.20 10.20 5.20 3.75 2.40 3.10 9.10 4.70 3.65 2.05 3.00 8.30 4.40 X 2824 3.25 2.75 3.10 10.00 6.80 3.10 2.35 3.00 8.90 6.30 3.00 1.95 2.90 8.00 6.00 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC-7351). 1 Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 10 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Soldering Process Profile Feature Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurred, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and is not harmful to the product. Marking permanency is not affected by this change. Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60-120 seconds 60-120 seconds Ramp-up Rate (TL to TP) 3C/seconds maximum 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60-150 seconds 220C* 235C** 60-150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-down Rate (TP to TL) 6C/seconds maximum 6C/seconds maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size G, H and X **Case Size A, B, C, D, E and F TP Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. SnPb Assembly TL tP Max Ramp Up Rate = 3 C/sec Max Ramp Down Rate = 6 C/sec tL Tsmax Tsmin 25 tS 25 C to Peak Time Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 11 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Capacitor Marking KEMET CWR 29 Style Rated Voltage J 107 15 K 030 Polarity Indicator (+) Picofarad Code KEMET ID PWC* * 030 = 30th week of 2010 Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature-reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C, and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 12 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Tape & Reel Packaging Information KEMET's molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481-1: Embossed carrier taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick-and-place systems. Table 3 - Packaging Quantity Case Code KEMET R I S T M U L W Z V A B C D Y X E/428P EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7260-38 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 13 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko W B1 E2 Bo S1 P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 5 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Ref. Note 2 25.0 (0.984) 30 (1.181) S1 Minimum Note 3 0.600 (0.024) T Maximum T1 Maximum 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4). See Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 14 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16-200 10 Bo T) Typical Component Centerline Ao Figure 3 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape s Tape Width (mm) 8,12 16-56 72-200 Maximum Rotation ( 20 10 5 S) Figure 4 - Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com R T2003_T429 * 5/8/2012 15 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm min.) flange distortion at outer edge) W2 (Measured at hub) D A N (See Note) C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 16 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum, Components 100 mm Min. Leader 400 mm Minimum, Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 17 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 KEMET Corporation World Headquarters Europe Asia 2835 KEMET Way Simpsonville, SC 29681 Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Northeast Asia Paris, France Tel: 33-1-4646-1009 Shenzhen, China Tel: 86-755-2518-1306 Sasso Marconi, Italy Tel: 39-051-939111 Beijing, China Tel: 86-10-5829-1711 Milan, Italy Tel: 39-02-57518176 Shanghai, China Tel: 86-21-6447-0707 Fort Lauderdale, FL Tel: 954-766-2800 Rome, Italy Tel: 39-06-23231718 Taipei, Taiwan Tel: 886-2-27528585 North America Madrid, Spain Tel: 34-91-804-4303 Southeast Asia Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offices Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 West Chester, PA Tel: 610-692-4642 Central Europe Hong Kong Tel: 852-2305-1168 Singapore Tel: 65-6586-1900 Landsberg, Germany Tel: 49-8191-3350800 Penang, Malaysia Tel: 60-4-6430200 Dortmund, Germany Tel: 49-2307-3619672 Bangalore, India Tel: 91-806-53-76817 Kwidzyn, Poland Tel: 48-55-279-7025 Central Novi, MI Tel: 248-994-1030 Carmel, IN Tel: 317-706-6742 West Milpitas, CA Tel: 408-433-9950 Mexico Zapopan, Jalisco Tel: 52-33-3123-2141 Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Farjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 18 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 19 MIL-PRF (CWR Style) Established Reliability - T429 Series CWR29 Style MIL-PRF-55365/11 Digitally signed by omjbfl1 DN: dc=com, dc=KEMET, ou=Sales, ou=USA, ou=FTLAUD, cn=omjbfl1 Date: 2012.05.31 11:13:25 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2003_T429 * 5/8/2012 20