SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
26mm (1.02 INCH) SINGLE DIGIT NU MERIC
DISPLAY
Part Number: SC10-11YWA Yellow
Features
z1.02 inch digit height.
zLow current operation.
zExcellent character appearance.
zHigh light output.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
SC10-11YWA Yellow (GaAsP/GaP) White Diffused 9000 23000 Common Cathode,
Rt. Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Yellow 588 nm IF=20mA
Δλ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage
Per Segment Or (DP) Yellow 4.2
(2.1)
5.0
(2.5) V IF=20mA
IR Reverse Current
Per Segment Or (DP) Yellow 10
(10) uA VR=5V
(VR=5V)
Parameter Yellow Units
Power dissipation
Per Segment Or (DP)
150
(75) mW
DC Forward Current
Per Segment Or (DP)
30
(30) mA
Peak Forward Current [1]
Per Segment Or (DP)
140
(140) mA
Reverse Voltage
Per Segment Or (DP)
5
(5) V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
Yellow SC10-11YWA
SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
PACKING & LABEL SPECIFICATIONS SC10-11YWA
SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
SPEC NO: DSAD2307 REV NO: V.13 DATE: APR/01/2011 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000785
