1.6X0.8mm SMD CHIP LED LAMP (0.25mm Height) Part Number: APG1608VGC/A PRELIMINARY SPEC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmX0.8mm SMT LED, 0.25mm thickness. The Green source color devices are made with InGaN on G- z Low power consumption. SiC Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Compatible with automatic placement equipment. It is recommended to use a wrist band or anti-electrostatic z Ideal for backlight and indicator. glove when handling the LEDs. z Package: 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Applications 1.Mobile phone Keypad indicator and backlight. 2.Flat backlight for LCD, switch and symbol. 3.Toys. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI3326 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.M.He PAGE: 1 OF 5 ERP: 1203007883 Selection Guide Part No. Dice APG1608VGC/A Lens Type Green (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 110 200 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI3326 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.M.He PAGE: 2 OF 5 ERP: 1203007883 Green SPEC NO: DSAI3326 APPROVED: WYNEC APG1608VGC/A REV NO: V.2 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.M.He PAGE: 3 OF 5 ERP: 1203007883 APG1608VGC/A Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAI3326 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.M.He PAGE: 4 OF 5 ERP: 1203007883 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAI3326 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu APG1608VGC/A DATE: MAR/30/2009 DRAWN: X.M.He PAGE: 5 OF 5 ERP: 1203007883