© 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681
Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · sales@sensitron.com
SENSITRON __
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4074, REV. H
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 600-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A HERMETIC TO-257
PACKAGE AVAILABLE SCREENED TO ANY REQUIRED LEVEL
FEATURES:
NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
High Frequency Option - Non-magnetic Glidcop leads are available for improved performance at
high frequency; use part number prefix SHDG
Ceramic Seal Option – For ceramic seals use part number prefix SHDC
Rohs Compliant Option – For Rohs compliance, use suffix -G
MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PEAK INVERSE VOLTAGE
PIV
600
Volts
MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC for P and N suffixes)
IO
20
Amps
MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC for Single and D suffixes)
IO
10
Amps
MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG
(t = 8.3ms, Sine) per leg, TC = 25 OC
IFRM
50
Amps
MAXIMUM POWER DISSIPATION, TC = 25 OC,
Pd
40
W
MAXIMUM THERMAL RESISTANCE, Junction to Case PER LEG
RJC
2.5
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE*
Top, Tstg
-55 to 200
C
* Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the
packaged device above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be
performed to 175C.
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
TYP
MAX.
UNITS
MAXIMUM FORWARD VOLTAGE DROP TJ = 25C
Pulsed (If = 10 A PER LEG) Vf TJ = 150 C
1.65
2.05
1.80
2.20
Volts
MAXIMUM FORWARD VOLTAGE DROP TJ = 25C
Pulsed (If = 6 A PER LEG) Vf TJ = 150 C
1.35
1.60
1.45
1.70
Volts
MAXIMUM REVERSE CURRENT (Ir @ 600V PIV PER LEG) TJ = 25 C
TJ = 150 C
0.04
0.08
0.15
0.50
mA
JUNCTION CAPACITANCE CT) (Vr =5V) per leg CT
250
350
pF
TOTAL CAPACITIVE CHARGE QC per leg
(VR=600V IF=20A di/dt=500A/s TJ=25C) This is design information only
35
N/A
nC
SHD626051
SHD626051P
SHD626051N
SHD626051D
© 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681
Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4074, REV. H
SHD626051
SHD626051P
SHD626051N
SHD626051D
© 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681
Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4074, REV. H
MECHANICAL DIMENSIONS
TO-257
1 2 3
.200
.190
(5.08
4.82)
.045
.035
(1.14
0.89)
.120(3.05) BSC
.430
.410
(10.92
10.41)
.420
.410
(10.67
10.41)
.665
.645
(16.89
16.38)
.537
.527
(13.64
13.39)
1.132
1.032
(28.75
26.21)
.035
.025
(0.89
0.63)
3 Places
.100(2.54) BSC
2 Places
.150
.140
(3.81
3.56) Dia.
PINOUT TABLE
TYPE
PIN 1
PIN 2
PIN 3
SINGLE RECTIFIER
CATHODE
ANODE
ANODE
DUAL RECTIFIER/COMMON CATHODE (P)
ANODE 1
COMMON
CATHODE
ANODE 2
DUAL RECTIFIER/COMMON ANODE (N)
CATHODE 1
COMMON
ANODE
CATHODE 2
DUAL RECTIFIER/DOUBLER (D)
ANODE
ANODE/
CATHODE
CATHODE
SCHEMATIC
1 2 3 1 2 3 1 2 3 3 2 1
SINGLE COMMON CATHODE COMMON ANODE DOUBLER
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
SHD626051
SHD626051P
SHD626051N
SHD626051D
© 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681
Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4074, REV. H
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
SHD626051
SHD626051P
SHD626051N
SHD626051D
