Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC311ST89 / 311ST89E v03.0710 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Typical Applications Features The HMC311ST89(E) is ideal for: P1dB Output Power: +15.5 dBm * Cellular / PCS / 3G Output IP3: +31.5 dBm * Fixed Wireless & WLAN Gain: 16 dB * CATV & Cable Modem 50 Ohm I/O's * Microwave Radio Industry Standard SOT89 Package Included in the HMC-DK001 Designer's Kit General Description Functional Diagram The HMC311ST89(E) is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT DC to 6 GHz amplifier. Packaged in an industry standard SOT89, the amplifier can be used as either a cascadable 50 Ohm gain stage or to drive the LO of HMC mixers with up to +16.5 dBm output power. The HMC311ST89(E) offers 16 dB of gain and an output IP3 of +31.5 dBm while requiring only 54 mA from a +5V supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and yields excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 5V, Rbias= 22 Ohm, TA = +25 C Parameter Min. Typ. 14.0 13.0 12.5 16.0 15.0 14.5 Gain DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 6.0 GHz Gain Variation Over Temperature DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz 0.004 0.007 0.012 Return Loss Input / Output DC - 2.0 GHz 2.0 - 5.0 GHz 5.0 - 6.0 GHz 8 7 8 Reverse Isolation DC - 6 GHz 13.5 12.0 10.0 Max. Units dB dB dB 0.007 0.012 0.016 dB/ C dB/ C dB/ C dB dB dB 20 dB 15.5 15.0 13.0 dBm dBm dBm Output Power for 1 dB Compression (P1dB) DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz Output Third Order Intercept (IP3) DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz 31.5 30 27 24 dBm dBm dBm dBm Noise Figure DC - 4 GHz 4.0 - 6.0 GHz 4.5 5 dB Supply Current (Icq) 55 74 mA Note: Data taken with broadband bias tee on device output. 8 - 20 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC311ST89 / 311ST89E v03.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Gain vs. Temperature 20 15 18 10 16 5 S21 S11 S22 0 -5 14 12 10 -10 8 -15 6 -20 8 +25 C +85 C -40 C 4 0 1 2 3 4 5 6 7 8 9 0 1 2 3 FREQUENCY (GHz) 0 -5 -5 -10 +25 C +85 C -40 C -20 6 7 8 -10 +25 C +85 C -40 C -15 -20 0 1 2 3 4 5 6 7 8 0 1 2 3 FREQUENCY (GHz) 5 6 7 8 Noise Figure vs. Temperature 10 -5 8 NOISE FIGURE (dB) 0 +25 C +85 C -40 C -10 4 FREQUENCY (GHz) Reverse Isolation vs. Temperature REVERSE ISOLATION (dB) 5 Output Return Loss vs. Temperature 0 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss vs. Temperature -15 4 FREQUENCY (GHz) -15 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 20 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss +25 C +85 C -40 C 6 4 2 -20 0 -25 0 1 2 3 4 5 FREQUENCY (GHz) 6 7 8 1 2 3 4 5 6 7 8 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 21 HMC311ST89 / 311ST89E v03.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz P1dB vs. Temperature 18 16 16 14 14 Psat (dBm) P1dB (dBm) 18 12 10 +25 C +85 C -40 C 8 10 +25 C +85 C -40 C 8 6 4 4 0 1 2 3 4 5 6 7 8 0 1 2 3 FREQUENCY (GHz) Power Compression @ 1 GHz 16 Pout (dBm), GAIN (dB), PAE (%) 18 16 14 12 Pout Gain PAE 8 6 4 2 0 -2 6 7 8 14 12 10 Pout Gain PAE 8 6 4 2 0 -2 -4 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 -4 -20 -18 -16 -14 -12 -10 -8 6 INPUT POWER (dBm) +25 C +85 C -40 C 14 10 1 2 3 4 5 FREQUENCY (GHz) -2 0 2 4 6 6 7 8 40 80 35 70 30 60 Gain P1dB Psat IP3 25 20 40 30 15 10 Icq 20 10 5 4.5 50 4.75 5 5.25 5.5 Vs (Vdc) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Icq (mA) 22 GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 26 0 -4 Gain, Power, OIP3 & Supply Current vs. Supply Voltage @ 1 GHz 34 18 -6 INPUT POWER (dBm) Output IP3 vs. Temperature IP3 (dBm) 5 Power Compression @ 6 GHz 18 10 4 FREQUENCY (GHz) 30 8 - 22 12 6 Pout (dBm), GAIN (dB), PAE (%) AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Psat vs. Temperature HMC311ST89 / 311ST89E v03.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Absolute Maximum Ratings +7V RF Input Power (RFIN)(Vcc = +3.9V) +10 dBm Junction Temperature 150 C Continuous Pdiss (T = 85 C) (derate 5.21 mW/C above 85 C) 0.34 W Thermal Resistance (junction to lead) 191 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Collector Bias Voltage (Vcc) Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC311ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC311ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H311 XXXX [2] H311 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 23 HMC311ST89 / 311ST89E v03.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Pin Descriptions AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/ DC ground. Application Circuit Note: 1. Select Rbias to achieve Icq using equation below, Rbias > 22 Ohm. 2. External blocking capacitors are required on RFIN and RFOUT. Icq = Vs - 3.8 Rbias Recommended Component Values Frequency (MHz) Component 8 - 24 50 900 1900 2200 2400 3500 5200 5800 L1 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 3.3 nH 3.3 nH C1, C2 0.01 F 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC311ST89 / 311ST89E v03.0710 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz Evaluation PCB List of Materials for Evaluation PCB 108313 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1, C2 Capacitor, 0402 Pkg. C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 F Capacitor, Tantalum R1 Resistor, 0805 Pkg. L1 Inductor, 0603 Pkg. U1 HMC311ST89(E) PCB [2] 107368 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 25 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC311ST89TR