TRF7900A www.ti.com SWRS031 - OCTOBER 2005 Fully Integrated Analog Front-End Dual Receiver Base Unit for 27-MHz Wireless Mouse and Keyboard Systems * FEATURES * * * * * 23 Discrete Components Intgrated into One Chip - Only External Components are Bypass and Filter Capacitors, and One Crystal RF Tuner, Mixer, Transistors, Passives, Coils, and Ceramic Filter Functionality All on One Chip Integrated Phase Locked Loop 8 User-Selectable Frequencies - Each Channel (Mouse and Keyboard) Can Independently Select Any of the Available Frequencies Internally Generated 6-MHz Clock to Drive USB Microcontroller * * * * High Data Throughput Rate - 5-kHz Square Wave Simultaneously per Channel - 10 kbps Miller Encoded Data I2C Control Interface Received Signal Strength Indicator 5-V Supply Available in 28-Pin TSSOP (PW) Pacakge APPLICATIONS * * * * * * 27-MHz Wireless Mouse and Keyboard Systems Human Interface Devices Wireless Control Remote Control Toys Wireless Headset Remote instrumentation DESCRIPTION The TRF7900A is a dual integrated RF transceiver designed for human-interface devices (HID). Operating at 27 MHz, it integrates multiple components (PLL, RF mixer, simulated SAW filter, tuning circuit, and miscellaneous passive components) to provide frequency selection from 8 discrete channels. This integration lowers component, manufacturing and system costs. USB or PS/2 Power PCB Loop Antenna TPS71533 I2C Control 2 Data Channels 6MHz for uP TRF7900A 12 MHz Crystal MSP430 The TRF7900A simplifies system design by reducing system component count and manual circuit tuning. By integrating the PLL, SAW filter, and RF mixer, the TRF7900A eliminates the manual tuning of RLC circuits required in traditional implementations. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2005, Texas Instruments Incorporated TRF7900A www.ti.com SWRS031 - OCTOBER 2005 The receiver also generates 8 frequencies that can be programmatically selected via the I2C interface bus for both the mouse channel and/or the keyboard channel. Another 6-MHz clock is internally generated to clock the USB microcontroller; this enables a single crystal to be used to supply the clock needs for the receiver channels and the microcontroller. The optimized receiver design enables simultaneous reception on both parallel channels up to 5 kHz (10 kbps Miller encoding) per channel. A receive strength signal indicator register can be read via the I2C bus to determine the signal strength. Correlating the RSSI reading to the packet error rate enables the controller to diagnose the signal and understand the user condition. ORDERING INFORMATION PACKAGED DEVICES PACKAGE TYPE TRF7900APW TSSOP - 28 TRANSPORT MEDIA, QUANTITY Rails, 50 TRF7900APWR TSSOP - 28 Tape and Reel, 2000 ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) VS- to VS+ Supply voltage VI Input voltage VID Differential input voltage Continuous power dissipation VALUE UNIT (1) 5.5 V VS 0.5 V 2 V See Dissipation Rating Table TJ Maximum junction temperature, any condition (2) 150 C TJ Maximum junction temperature, continuous operation, long term reliability(3) 125 C Tstg Storage temperature range (1) (2) -65 to 150 C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 300 C ESD ratings: Human Body Model 4000 V ESD ratings: Charged Device Model 1500 V ESD ratings: Machine Model 200 V The absolute maximum ratings under any condition is limited by the constraints of the silicon process. Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. The maximum junction temperature for continuous operation is limited by package constraints. Operation above this temperature may result in reduced reliability and/or lifetime of the device. DISSIPATION RATINGS (1) (2) 2 PACKAGE JC JA (1) PW (28) 13.7 56.5 POWER RATING (2) TA 25C TA = 85C 1.77 W 708 mW This data was taken using the JEDEC standard high-K test PCB. Power rating is determined with a junction temperature of 125C. This is the point where distortion starts to substantially increase. Thermal management of the final PCB should strive to keep the junction temperature at or below 125C for best performance and long term reliability. TRF7900A www.ti.com SWRS031 - OCTOBER 2005 RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) MIN VS- to VS+ Suppy voltage, analog NOM MAX 4.0 UNIT 5.5 V MAX UNIT 100 mA 50 ppm ELECTRICAL CHARACTERISTICS VS = 5 V, TA = 25C (unless otherwise noted) PARAMETER IO TEST CONDITIONS Output current MIN TYP 100 RF Specifications Precision of required external 12-MHz crystal Channel spacing 50 kHz 26.995 MHz 27.045 MHz 27.095 MHz 27.145 MHz 27.195 MHz 27.295 MHz Optional channel 27.245 MHz Optional channel 26.945 MHz Communication spacing Antenna Input Resistance RO Output resistance, Out_1 and Out_2 DC Differential 27 MHz <100 k 5 k 1.2 k 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TRF7900APWR Package Package Pins Type Drawing TSSOP PW 28 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2000 330.0 16.4 Pack Materials-Page 1 6.9 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 10.2 1.8 12.0 16.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TRF7900APWR TSSOP PW 28 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated