Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FAN7380 Half-Bridge Gate Driver Features Description Floating Channel Designed for Bootstrapping The FAN7380 is a monolithic half-bridge gate-drive IC for MOSFETs and IGBTs that operate up to +600 V. Fairchild's high-voltage process and common-mode noise cancelling technique provide stable operation of high-side driver under high-dv/dt noise circumstances. An advanced level-shift circuit allows high-side gate driver operation up to VS=-9.8 V (typical) for VBS=15 V. The input logic level is compatible with standard TTLseries logic gates. The internal shoot-through protection circuit provides 100 ns dead-time to prevent output switching devices from both conducting during transition periods. UVLO circuits for both channels prevent malfunction when VCC and VBS are lower than the specified threshold voltage. Output drivers typically source / sink at 90 mA / 180 mA, respectively, which is suitable for fluorescent / compact fluorescent lamp ballast applications and systems requiring low di/dt noise. Operation to +600 V Typically 90 mA / 180 mA Sourcing/Sinking Current Driving Capability for Both Channels Common-Mode dv/dt Noise Cancelling Circuit Extended Allowable Negative VS Swing to -9.8 V for Signal Propagation at VCC=VBS=15 V VCC & VBS Supply Range from 10 V to 20 V UVLO Functions for Both Channels TTL-Compatible Input Logic Threshold Levels Matched Propagation Delay Below 50 ns Built-in 100 ns Dead-Time Control Function Output In-Phase with Input Signal Typical Applications Fluorescent Lamp Ballast Compact Fluorescent Lamp Ballast 8-SOP Related Resources AN-6076 - Design and Application Guide of Bootstrap Circuit for High-Voltage Gate-Drive IC AN-9052 - Design Guide for Selection of Bootstrap Components AN-8102 - Recommendations to Avoid Short Pulse Width Issues in HVIC Gate Driver Applications Ordering Information Device Package FAN7380MX(1) 8-SOP Pb-Free Operating Temperature Yes -40C ~ +125C Packing Description Tape & Reel Lighting Application Note: 1. This device has passed wave soldering test by JESD22A-111. (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 www.fairchildsemi.com FAN7380 -- Half-Bridge Gate Driver September 2015 FAN7380 -- Half-Bridge Gate Driver Typical Application Circuit 15V 600V RBOOT LIN DBOOT VB 8 1 LIN HIN 2 HIN HO 7 3 VCC VS 6 CBOOT C1 4 COM Q1 R1 R2 Q2 R3 LO 5 Load R4 FAN7380 Rev.03 Figure 1. Application Circuit for Fluorescent Lamp Ballast Internal Block Diagram 8 VB 7 HO 6 VS 3 VCC 5 LO 4 COM UVLO 2 R DRIVER PULSE GENERATOR HIN SCHMITT TRIGGER INPUT NOISE CANCELLER R S Q HS(ON/OFF) UVLO 1 SHOOT THROUGH PREVENTION LS(ON/OFF) DELAY {DEAD-TIME=100ns} DRIVER LIN FAN7380 Rev.02 Figure 2. Functional Block Diagram (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 www.fairchildsemi.com 2 FAN7380 -- Half-Bridge Gate Driver Pin Configuration LIN 1 HIN 2 VCC 3 COM 4 FAN7380 8 VB 7 HO 6 VS 5 LO FAN7380 Rev.02 Figure 3. Pin Configuration (Top View) Pin Definitions Pin # Name I/O Description 1 LIN I Logic Input for Low-Side Gate Driver Output 2 HIN I Logic Input for High-Side Gate Driver Output 3 VCC I Low-Side Supply Voltage 4 COM 5 LO O Low-Side Driver Output 6 VS I High-Voltage Floating Supply Return 7 HO O High-Side Driver Output 8 VB I High-Side Floating Supply Logic Ground and Low-Side Driver Return (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA=25C, unless otherwise specified. Symbol Parameter VS High-side offset voltage VB High-side floating supply voltage Min. Max. VB-25 VB+0.3 -0.3 625.0 VS-0.3 VB+0.3 VHO High-side floating output voltage HO VCC Low-side and logic-fixed supply voltage -0.3 25.0 VLO Low-side output voltage LO -0.3 VCC+0.3 VIN Logic input voltage (HIN, LIN) -0.3 VCC+0.3 VCC-25 VCC+0.3 COM Logic ground dVS/dt Allowable offset voltage slew rate PD(2)(3)(4) 50 Power dissipation Unit V V/ns 0.625 W JA Thermal resistance, junction-to-ambient 200 C/W TJ Junction temperature 150 C TS Storage temperature 150 C -50 Notes: 2. Mounted on 76.2 x 114.3 x 1.6 mm PCB (FR-4 glass epoxy material). 3. Refer to the following standards: JESD51-2: Integral circuits thermal test method environmental conditions - natural convection JESD51-3: Low effective thermal conductivity test board for leaded surface mount packages 4. Do not exceed PD under any circumstances. Recommended Operating Ratings The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. VB High-side floating supply voltage VS+10 VS+20 VS High-side floating supply offset voltage 6-VCC 600 VHO High-side (HO) output voltage VS VB VLO Low-side (LO) output voltage COM VCC VIN Logic input voltage (HIN, LIN) COM VCC VCC Low-side supply voltage 10 20 Ambient temperature -40 125 TA (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 Unit V C www.fairchildsemi.com 4 FAN7380 -- Half-Bridge Gate Driver Absolute Maximum Ratings VBIAS (VCC, VBS) = 15.0 V, TA = 25C, unless otherwise specified. The VIN and IIN parameters are referenced to COM. The VO and IO parameters are referenced to VS and COM and are applicable to the respective outputs HO and LO. Symbol Parameter Conditions Min. Typ. Max. VCCUV+ VBSUV+ VCC & VBS supply under-voltage positive going threshold 8.2 9.2 10.0 VCCUVVBSUV- VCC & VBS supply under-voltage negative going threshold 7.6 8.7 9.6 VCCUVH VBSUVH VCC supply under-voltage lockout hysteresis Unit V 0.5 ILK Offset supply leakage current VB=VS=600 V 50 IQBS Quiescent VBS supply current VIN=0 V or 5 V 44 100 IQCC Quiescent VCC supply current VIN=0 V or 5 V 70 180 IPBS Operating VBS supply current fIN=20 kHz, rms value 600 IPCC Operating VCC supply current fIN=20 kHz, rms value 610 VIH Logic "1" input voltage VIL Logic "0" input voltage VOH High-level output voltage, VBIAS-VO VOL Low-level output voltage, VO IIN+ Logic "1" input bias current VIN=5 V 5 40 IIN- Logic "0" input bias current VIN=0 V 1.0 2.0 IO+ IO- Output HIGH short-circuit pulse current VO=0 V,VIN=5 V with PW10 s V =15 V,VIN=0 V with Output LOW short-circuit pulsed current O PW10 s VS Allowable negative VS pin voltage for HIN signal propagation to HO 2.5 0.8 2.8 IO=20 mA 1.2 60 90 130 180 A A V V A mA -9.8 -7.0 V Min. Typ. Max. Unit 70 135 200 Dynamic Electrical Characteristics VBIAS(VCC, VBS) = 15.0 V, VS = COM, CL = 1000 pF and TA = 25C, unless otherwise specified. Symbol ton Parameter Turn-on propagation delay Conditions VS=0 V VS=0 V or 600 V (5) toff Turn-off propagation delay 60 130 190 tr Turn-on rise time 160 230 290 tf Turn-off fall time 20 90 160 DT Dead time 80 120 190 MT Delay matching, HS & LS turn-on/off ns 50 Note: 5. This parameter guaranteed by design. (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 www.fairchildsemi.com 5 FAN7380 -- Half-Bridge Gate Driver Static Electrical Characteristics Turn-on [ns] Turn-OnPropagation Propagation Delay Delay [nsec] Turn-on Delay [nsec] [ns] Turn-On Propagation Propagation Delay 200 VVCC=VBS CC=VBS COM=0V COM=0V CL=1nF CTa=25C L=1nF TA=25C 190 180 170 160 150 140 High-Side 130 120 Low-Side 110 100 90 80 10 12 14 16 18 200 VCC=VBS=15V VCC=VBS=15V COM=0V COM=0V CL=1nF 190 180 CL=1nF 170 160 High-Side 150 140 130 Low-Side 120 110 100 90 80 -40 20 -20 0 Supply Supply Voltage Voltage[V] [V] 200 VVCC=VBS CC=VBS COM=0V COM=0V CL=1nF CTa=25C L=1nF 160 TA=25C Low-Side 140 120 High-Side 100 80 10 12 14 16 60 80 100 120 18 20 200 VCC=VBS=15V VCC=VBS=15V COM=0V COM=0V CL=1nF 190 180 CL=1nF 170 160 150 Low-Side 140 High-Side 130 120 110 100 90 80 -40 -20 0 20 40 60 80 100 120 Temperature Temperature[C] [C] SupplyVoltage Voltage[V] [V] Supply Figure 6. Turn-Off Propagation Delay vs. Supply Voltage Figure 7. Turn-Off Propagation Delay vs. Temp. 350 300 VVCC=VBS CC=VBS COM=0V COM=0V CL=1nF CTa=25C L=1nF TA=25C 300 High-Side 250 200 Turn-on Time [nsec] [ns] Turn-On Rising Rising Time Turn-On Turn-onRising RisingTime Time[nsec] [ns] 40 Figure 5. Turn-On Propagation Delay vs. Temp. Turn-off Turn-OffPropagation PropagationDelay Delay [ns] [nsec] Turn-off Delay[nsec] [ns] Turn-Off Propagation Propagation Delay Figure 4. Turn-On Propagation Delay vs. Supply Voltage 180 20 Temperature [C] Temperature [C] Low-Side 150 100 VVCC=VBS=15V CC=VBS=15V COM=0V COM=0V CL=1nF CL=1nF 280 260 240 Low-Side 220 200 High-Side 180 160 140 120 100 10 12 14 16 18 -40 20 SupplyVoltage Voltage[V] [V] Supply 0 20 40 60 80 100 120 Temperature Temperature[C] [C] Figure 8. Turn-On Rising Time vs. Supply Voltage Figure 9. Turn-On Rising Time vs. Temp. (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 -20 www.fairchildsemi.com 6 FAN7380 -- Half-Bridge Gate Driver Typical Performance Characteristics 150 140 VVCC=VBS CC=VBS COM=0V COM=0V CL=1nF CTa=25C L=1nF TA=25C 110 100 High_side Turn-off Falling FallingTime Time[nsec] [ns] Turn-Off Turn-off Time [nsec] [ns] Turn-Off Falling Falling Time 120 90 80 Low-Side 70 60 VVCC=VBS=15V CC=VBS=15V COM=0V COM=0V CL=1nF CL=1nF 130 120 110 100 90 High-Side 80 70 Low-Side 60 50 40 30 20 10 0 50 10 12 14 16 18 -40 20 -20 0 SupplyVoltage Voltage [V] [V] Supply Figure 10. Turn-Off Falling Time vs. Supply Voltage HIN 180 DT1 90% DT2 10% LO 140 Dead-Time [ns] Dead-Time [nsec] Dead-Time[nsec] [ns] Dead-Time LIN HO 90% 10% DT2 120 DT1 100 VVCC=VBS CC=VBS COM=0V COM=0V CCL=1nF L=1nF Ta=25C TA=25C 80 60 40 10 12 14 16 18 20 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 DT1 90% DT2 10% LO HO 100 TA=25C 90 90% 10% DT2 -20 0 40 60 80 100 120 Figure 13. Dead-Time vs. Temp. Low-Side 70 60 50 40 14 16 18 VCC=VBS=15V V CC=VBS=15V COM=0V COM=0V LO=HO=0V LO=HO=0V 180 160 140 120 100 Low-Side 80 High-Side 60 40 20 0 -40 20 SupplyVoltage Voltage[V] [V] Supply -20 0 20 40 60 80 100 120 Temperature Temperature[C] [C] Figure 14. Output Sourcing Current vs. Supply Voltage Figure 15. Output Sourcing Current vs. Temp. (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 20 200 80 12 120 Temperature Temperature[C] [C] High-Side 10 100 DT1 -40 Output Sourcing Output SourcingCurrent Current[mA] [mA] Output OutputSourcing SourcingCurrent Current[mA] [mA] 110 120 80 VVCC=VBS=15V CC=VBS=15V COM=0V COM=0V CL=1nF CL=1nF LIN Figure 12. Dead-Time vs. Supply Voltage VCC=VBS VCC=VBS COM=0V COM=0V LO=HO=0V LO=HO=0V Ta=25C 60 HIN SupplyVoltage Voltage[V] [V] Supply 130 40 Figure 11. Turn-Off Falling Time vs. Temp. 200 160 20 Temperature[C] [C] Temperature www.fairchildsemi.com 7 FAN7380 -- Half-Bridge Gate Driver Typical Performance Characteristics (Continued) 300 VCC=VBS VCC=VBS COM=0V COM=0V LO=VCC, HO=VB LO=VCC, HO=VB Ta=25C 220 200 Output OutputSinking SinkingCurrent Current [mA] [mA] Output Sinking Output SinkingCurrent Current[mA] [mA] 240 TA=25C 180 High-Side 160 Low-Side 140 120 100 VVCC=VBS=15V CC=VBS=15V COM=0V COM=0V LO=VCC, HO=VB LO=VCC, HO=VB 280 260 240 220 200 180 Low-Side 160 140 High-Side 120 100 80 80 60 10 12 14 16 18 20 -40 -20 0 20 Supply SupplyVoltage Voltage[V] [V] VCC=VBS VCC=VBS COM=0V COM=0V Ta=25C -6 TA=25C -8 -10 -12 -14 -16 -18 10 12 14 16 18 20 Supply SupplyVoltage Voltage [V] [V] Figure 18. Allowable Negative VS Voltage for Signal Propagation to High-Side vs. Supply Voltage 80 100 120 -8.0 -8.5 VCC=VBS=15V VCC=VBS=15V COM=0V COM=0V -9.0 -9.5 -10.0 -10.5 -11.0 -40 -20 0 20 40 60 80 100 120 Temperature [C] Temperature [C] Figure 19. Allowable Negative VS Voltage for Signal Propagation to High-Side vs. Temperature 100 105 VBS=15V VCC=VBS COM=0V COM=0V HIN=LIN=0V HIN=LIN=0V TA=25C 80 95 HIN=LIN=0V 90 85 TA=25C 60 VCC=VBS=15V VCC=VBS=15V COM=0V COM=0V HIN=LIN=0V 100 IQCC [A] IQCC [uA] IQCC [uA] IQCC [A] 60 Figure 17. Output Sinking Current vs. Temp. Allowable Negative VS Voltage Allowable Negative VS Voltage for Signal Propagation totoHigh-Side [V] for Signal Propagation High-Side [V] Allowable Negative VSVS Voltage Allowable Negative Voltage for Signal Propagation totoHigh-Side for Signal Propagatio High-Side [V] [V] Figure 16. Output Sinking Current vs. Supply Voltage -4 40 Temperature[C] [C] Temperature 40 80 75 70 65 60 20 55 50 45 0 0 5 10 15 -40 20 Supply SupplyVoltage Voltage[V] [V] 0 20 40 60 80 100 120 Temperature[[C] Temperature C] Figure 20. IQCC vs. Supply Voltage Figure 21. IQCC vs. Temperature (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 -20 www.fairchildsemi.com 8 FAN7380 -- Half-Bridge Gate Driver Typical Performance Characteristics (Continued) 80 70 60 VCC=15V COM=0V HIN=LIN=0V 54 52 50 50 IIQBS QBS [A] [uA] IQBS [A] IQBS [uA] 56 VVCC=15V CC=15V COM=0V COM=0V HIN=LIN=0V HIN=LIN=0V TTa=25C A=25C 40 30 48 46 44 42 40 20 38 10 36 0 0 5 10 15 34 20 -40 -20 0 Supply Voltage [V] Supply [V] Figure 22. IQBS vs. Supply Voltage 2.3 2.0 1.9 High-Side 1.7 80 100 120 100 120 V =V =15V 2.0 Low-Side 1.8 60 CC BS VCC=VBS=15V COM=0V COM=0V HIN=LIN=5V HIN=LIN=5V IL=20mA IL=20mA 2.2 VVOH OH [V] [V] VOH [V] VOH [V] 2.1 40 Figure 23. IQBS vs. Temperature VCC=VBS VCC =VBS COM=0V COM=0V HIN=LIN=5V HIN=LIN=5V IL=20mA Ta=25C IL=20mA TA=25C 2.2 20 Temperature C] Temperature[[C] High-Side 1.8 Low-Side 1.6 1.4 1.6 1.5 1.2 1.4 10 12 14 16 18 -40 20 -20 0 Figure 24. High-Level Output Voltage vs. Supply Voltage 0.70 80 L 0.65 0.60 0.60 Low-Side 0.55 High-Side 0.50 0.55 60 VCC=VBS=15V VCC=VBS=15V COM=0V COM=0V HIN=LIN=0V HIN=LIN=0V IL=20mA I =20mA 0.75 VOL [V] VOL [V] VOL [V] VOL 0.80 VCC=VBS VCC =VBS COM=0V COM=0V HIN=LIN=0V HIN=LIN=0V IL=20mA Ta=25C IL=20mA TA=25C 0.65 40 Figure 25. High-Level Output Voltage vs. Temp. 0.75 0.70 20 Temperature [C] [C] Temperature SupplyVoltage Voltage[V] [V] Supply High-Side 0.45 0.40 0.50 Low-Side 10 12 14 16 18 0.35 -40 20 Supply SupplyVoltage Voltage[V] [V] 0 20 40 60 80 100 120 Temperature[[C] Temperature C] Figure 26. Low-Level Output Voltage vs. Supply Voltage Figure 27. Low-Level Output Voltage vs. Temp. (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 -20 www.fairchildsemi.com 9 FAN7380 -- Half-Bridge Gate Driver Typical Performance Characteristics (Continued) 7.0 5 IN+ 6.5 HIN=LIN=5V 6.0 5.5 VVCC=VBS CC=VBS COM=0V COM=0V IN=VCC or IN=0V IN=V Ta=25C CC or IN=0V TA=25C 3 2 IN+ IN+ [A] [uA] IN+/ININ+/IN- [A] [uA] 4 HIN 5.0 LIN 4.5 4.0 3.5 1 3.0 IN- 2.5 0 2.0 0 5 10 15 -40 20 -20 0 20 40 60 80 100 120 Temperature Temperature [C] [C] Supply Supply Voltage Voltage[V] [V] Figure 28. Input Bias Current vs. Supply Voltage Figure 29. Input Bias Current vs. Temperature 11 11.0 VSBUV+/VSBUV- [V][V] VBSUV+/VBSUV- VCCUV+/VCCUV- [V][V] VCCUV+/VCCUV- 10.5 10 VCCUV+ VCCUV+ 9 VCCUVVCCUV8 10.0 VBSUV+ VBSUV+ 9.5 9.0 VBS_UVVBSUV- 8.5 8.0 7.5 7 7.0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 Temperature Temperature [C] [C] Figure 30. VCC UVLO Threshold Voltage vs. Temp. 40 60 80 100 120 Figure 31. VBS UVLO Threshold Voltage vs. Temp. 2.6 2.0 2.5 Input Logic Threshold [V] VB-to-COM=650V VB-to-COM=650V 1.5 IILK [uA] LK [A] 20 Temperature [[C] Temperature C] 1.0 0.5 2.4 VCC=VBS=15V VCC=VBS=15V COM=0V COM=0V VIH (HIN) VIH(HIN) 2.3 2.2 VIH(LIN) VIH (LIN) 2.1 2.0 VIL (LIN) VIL(LIN) 1.9 1.8 VILVIL(HIN) (HIN) 1.7 1.6 1.5 0.0 -40 -20 0 20 40 60 80 100 -40 120 Figure 32. VB to COM Leakage Current vs. Temp. 0 20 40 60 80 100 120 Figure 33. Input Logic Threshold vs. Temp. (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 -20 Temperature [C] Temperature [C] Temperature [[C] Temperature C] www.fairchildsemi.com 10 FAN7380 -- Half-Bridge Gate Driver Typical Performance Characteristics (Continued) 5V HIN HIN LIN 50% 50% LIN tr tf 90% LO HO 90% 90% 10% 10% 10% DT DT 10 % FAN7380 Rev.01 FAN7380 Rev.01 Figure 34. Switching Time Waveforms Figure 35. Internal Dead-Time Timing (c) 2005 Fairchild Semiconductor Corporation FAN7380 * Rev. 2.7 50% 90% toff ton HO LO 50% www.fairchildsemi.com 11 FAN7380 -- Half-Bridge Gate Driver Switching Time Definitions C 0.35 5.12 4.72 8 A 5 B 6.30 5.70 1.75 0.65 4.15 3.75 5.60 1.27 1 4 1.27 PIN #1 ID 0.25 M C B A TOP VIEW 1.85 1.35 1.75 1.25 C B C 0.51 0.31 (8X) 0.10 C 0.25 0.10 OPTION A BEVEL EDGE BEVEL 8 4 SEATING PLANE DETAIL "B" SCALE 2:1 0.25 0.15 OPTION B NON-BEVEL EDGE NOTES: UNLESS OTHERWISED SPECIFIED R0.10 A. 0.25 B. C 1.04 C SIDE VIEW FRONT VIEW GAGE PLANE LAND PATTERN RECOMMENDATION 0.80 0.30 D. E. F. THIS PACKAGE CONFORMS TO JEDEC MS-012 VARIATION A EXCEPT WHERE NOTED. ALL DIMENSIONS ARE IN MILLIMETERS OUT OF JEDEC STANDARD VALUE DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS. LAND PATTERN AS PER IPC SOIC127P600X175-8M DRAWING FILENAME: MKT-M08Brev2 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com