EEUEB2C221S - Panasonic - Product.Network

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EE104 –

φD±0.5

φ5to φ8φ10<

φd±0.05

F±0.5

Sleeve

14 min.

3 min.

L✽

(φ8҂15 only L±1.5)✽L<16:L±1.0

L>20:L±2.0

Pressure relief

φ6.3<+

–

φD±0.5

■Features

● Endurance : +105 °C 5000 h to 10000 h

● Hight ripple hight frequency (Hight Voltage)

● RoHS directive compliant

Radial Lead Type

Series: EB Type: A

■Speciﬁ cations

■Di men sions in mm (not to scale)

(mm)

Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C

Rated W.V. Range 10 V.DC to 63 V.DC 160 V.DC to 450 V.DC

Nominal Cap. Range 0.47 µF to 3300 µF 10 µF to 330 µF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I < 0.01 CV or 3 (µA)

After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater)

tan δPlease see the attached standard products list

Endurance

After following life test with DC voltage and +105 °C±2 °C ripple current value applied

(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when

the capacitors are restord to 20 °C, the capacitors shall meet the limits speciﬁ ed below.

(10 to 63 V.DC)

Duration : φ5҂

11 to φ8҂

11.5 : 5000 hours φ5҂

15 to φ6.3҂

15 : 7000 hours

φ8҂

15 to φ

12.5҂

25 : 10000 hours

Capacitance change ±30 % of initial measured value

tan δ< 300 % of initial speciﬁ ed value

DC leakage current < initial speciﬁ ed value

(160 to 450 V.DC)

Duration : 5000 hours

Capacitance change ±20 % of initial measured value

tan δ< 200 % of initial speciﬁ ed value

DC leakage current < initial speciﬁ ed value

Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

[mm]

Body Dia. φD56.3 8 10 12.5 16 18

Lead Dia. φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8

Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5

■Frequency correction factor for ripple current

(10 ~ 63 V.DC)

Capacitance

(µF)

Frequency (Hz)

60 120 1 k 10 k 100 k

0.47 to 10 0.75 1.00 1.40 1.55 1.65

22 to 470 0.85 1.00 1.20 1.25 1.30

1000 to 3300 0.95 1.00 1.05 1.10 1.15

W. V.

(V. DC)

Frequency (Hz)

120 1 k

10 k to 30k 30 k to 100k

160 to 250 0.55 0.85 0.90 1.00

350 to 450 0.500.800.901.00

Sep. 201000

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EE105 –

■Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(120 Hz)

(+105 °C)

tan δ

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

Taping

✽H

(V) (µF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)

100 5 15 1050.307000 0.5 2.0 5.0 2.5 EEUEB1A101( ) 200 2000

5 11 660.305000 0.5 2.0 5.0 2.5 EEUEB1A101S( ) 200 2000

220 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5 EEUEB1A221( ) 200 2000

6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5 EEUEB1A221S( ) 200 2000

470 8 15 2780.3010000 0.6 3.5 5.0 EEUEB1A471( ) 200 1000

8 11.51800.305000 0.6 3.5 5.0 EEUEB1A471S( ) 200 1000

2200 12.5 20 540 0.32 10000 0.6 5.0 5.0 EEUEB1A222( ) 200 500

3300 12.5 25 802 0.34 10000 0.6 5.0 5.0 EEUEB1A332( ) 200 500

16 1000 10 20 430 0.25 10000 0.6 5.0 5.0 EEUEB1C102( ) 200 500

2200 12.5 25 706 0.27 10000 0.6 5.0 5.0 EEUEB1C222( ) 200 500

47 5 15 780.227000 0.5 2.0 5.0 2.5 EEUEB1E470( ) 200 2000

5 11 550.225000 0.5 2.0 5.0 2.5 EEUEB1E470S( ) 200 2000

100 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5 EEUEB1E101( ) 200 2000

6.3 11.2 95 0.22 5000 0.5 2.5 5.0 2.5 EEUEB1E101S( ) 200 2000

220 8 11.5 125 0.225000 0.6 3.5 5.0 EEUEB1E221S( ) 200 1000

330 8 15 2550.2210000 0.6 3.5 5.0 EEUEB1E331( ) 200 1000

470 10 16 3210.2210000 0.6 5.0 5.0 EEUEB1E471( ) 200 500

1000 12.5 20 498 0.22 10000 0.6 5.0 5.0 EEUEB1E102( ) 200 500

33 5 15 660.187000 0.5 2.0 5.0 2.5 EEUEB1V330( ) 200 2000

5 11 460.185000 0.5 2.0 5.0 2.5 EEUEB1V330S( ) 200 2000

220 8 15 1970.1810000 0.6 3.5 5.0 EEUEB1V221( ) 200 1000

330 10 16 2780.1810000 0.6 5.0 5.0 EEUEB1V331( ) 200 500

470 10 20 3490.1810000 0.6 5.0 5.0 EEUEB1V471( ) 200 500

1000 12.5 25 586 0.18 10000 0.6 5.0 5.0 EEUEB1V102( ) 200 500

0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1HR47S( ) 200 2000

1 5 11 8 0.155000 0.5 2.0 5.0 2.5 EEUEB1H1R0S( ) 200 2000

2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H2R2S( ) 200 2000

3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H3R3S( ) 200 2000

4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H4R7S( ) 200 2000

10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H100S( ) 200 2000

22 5 15 550.15 7000 0.5 2.0 5.0 2.5 EEUEB1H220( ) 200 2000

5 11 390.155000 0.5 2.0 5.0 2.5 EEUEB1H220S( ) 200 2000

47 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5 EEUEB1H470( ) 200 2000

6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5 EEUEB1H470S( ) 200 2000

100 8 11.5 99 0.15 5000 0.6 3.5 5.0 EEUEB1H101S( ) 200 1000

220 10 16 2340.1510000 0.6 5.0 5.0 EEUEB1H221( ) 200 500

330 10 20 2930.1510000 0.6 5.0 5.0 EEUEB1H331( ) 200 500

470 12.5 20 3700.1510000 0.6 5.0 5.0 EEUEB1H471( ) 200 500

0.47 5 15 60.127000 0.5 2.0 5.0 2.5 EEUEB1JR47( ) 200 2000

5 11 4.50.125000 0.5 2.0 5.0 2.5 EEUEB1JR47S( ) 200 2000

1 5 15 120.127000 0.5 2.0 5.0 2.5 EEUEB1J1R0( ) 200 2000

5 11 90.125000 0.5 2.0 5.0 2.5 EEUEB1J1R0S( ) 200 2000

2.2 5 15 220.127000 0.5 2.0 5.0 2.5 EEUEB1J2R2( ) 200 2000

5 11 16.50.125000 0.5 2.0 5.0 2.5 EEUEB1J2R2S( ) 200 2000

3.3 5 15 300.127000 0.5 2.0 5.0 2.5 EEUEB1J3R3( ) 200 2000

5 11 200.125000 0.5 2.0 5.0 2.5 EEUEB1J3R3S( ) 200 2000

4.7 5 15 300.127000 0.5 2.0 5.0 2.5 EEUEB1J4R7( ) 200 2000

5 11 230.125000 0.5 2.0 5.0 2.5 EEUEB1J4R7S( ) 200 2000

10 5 15 460.127000 0.5 2.0 5.0 2.5 EEUEB1J100( ) 200 2000

5 11 300.125000 0.5 2.0 5.0 2.5 EEUEB1J100S( ) 200 2000

22 6.3 15 55 0.12 7000 0.5 2.5 5.0 2.5 EEUEB1J220( ) 200 2000

6.3 11.2 40 0.12 5000 0.5 2.5 5.0 2.5 EEUEB1J220S( ) 200 2000

33 6.3 15 71 0.12 7000 0.5 2.5 5.0 2.5 EEUEB1J330( ) 200 2000

6.3 11.2 50 0.12 5000 0.5 2.5 5.0 2.5 EEUEB1J330S( ) 200 2000

47 8 15 94 0.12 10000 0.6 3.5 5.0 EEUEB1J470( ) 200 1000

8 11.5 800.125000 0.6 3.5 5.0 EEUEB1J470S( ) 200 1000

100 8 15 1800.1210000 0.6 3.5 5.0 EEUEB1J101( ) 200 1000

220 10 20 2920.1210000 0.6 5.0 5.0 EEUEB1J221( ) 200 500

330 12.5 20 3810.1210000 0.6 5.0 5.0 EEUEB1J331( ) 200 500

470 12.5 25 4540.1210000 0.6 5.0 5.0 EEUEB1J471( ) 200 500

Endurance : 105 °C φ5҂11 to φ8҂11.5=5000 h, φ5×15 to φ6.3҂15=7000 h, φ8×15 to φ12.5҂25=10000 h

When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.

The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.

Sep. 201000

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EE106 –

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(100 kHz)

(+105 °C)

tan δ

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

(V) (µF) (mm) (mm)

(mA r.m.s.)

(hours) (mm)(mm)(mm) (pcs)(pcs)

160

22 10 20 470 0.155000 0.6 5.0 5.0 EEUEB2C220( ) 200 500

33 10 20 470 0.155000 0.6 5.0 5.0 EEUEB2C330( ) 200 500

47 12.5 20 600 0.15 5 000 0.6 5.0 5.0 EEUEB2C470( ) 200 500

68 12.5 25 750 0.155000 0.6 5.0 5.0 EEUEB2C680( ) 200 500

16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2C680S( ) 100 250

100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101( ) 100 250

18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101S( ) 100 250

150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C151 100 –

18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C151S( ) 100 250

220 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C221 100 –

18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C221S( ) 100 250

330 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2C331 50 –

200

22 10 20 470 0.155000 0.6 5.0 5.0 EEUEB2D220( ) 200 500

33 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D330( ) 200 500

47 12.5 20 600 0.15 5 000 0.6 5.0 5.0 EEUEB2D470( ) 200 500

68 12.5 25 750 0.155000 0.6 5.0 5.0 EEUEB2D680( ) 200 500

16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2D680S( ) 100 250

100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101( ) 100 250

18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101S( ) 100 250

150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2D151 100 –

18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2D151S( ) 100 250

220 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2D221 100 –

250

22 12.5 20 560 0.15 5 000 0.6 5.0 5.0 EEUEB2E220( ) 200 500

33 12.5 20 560 0.15 5 000 0.6 5.0 5.0 EEUEB2E330( ) 200 500

47 12.5 25 710 0.155000 0.6 5.0 5.0 EEUEB2E470( ) 200 500

16 20 710 0.15 5000 0.8 7.5 7.5 EEUEB2E470S( ) 100 250

68 16 25 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680( ) 100 250

18 20 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680S( ) 100 250

100 16 31.5 1200 0.15 5000 0.8 7.5 – EEUEB2E101 100 –

18 25 1200 0.15 5000 0.8 7.5 7.5 EEUEB2E101S( ) 100 250

150 18 31.5 1470 0.15 5000 0.8 7.5 – EEUEB2E151 50 –

350

10 10 20 270 0.20 5000 0.6 5.0 5.0 EEUEB2V100( ) 200 500

22 12.5 20 350 0.20 5000 0.6 5.0 5.0 EEUEB2V220( ) 200 500

33 16 20 480 0.205000 0.8 7.5 7.5 EEUEB2V330S( ) 100 250

47 16 25 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470( ) 100 250

18 20 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470S( ) 100 250

68 16 31.5 780 0.205000 0.8 7.5 – EEUEB2V680 100 –

18 25 780 0.20 5000 0.8 7.5 7.5 EEUEB2V680S( ) 100 250

100 18 31.5 970 0.20 5000 0.8 7.5 – EEUEB2V101 50 –

400

10 10 20 250 0.24 5000 0.6 5.0 5.0 EEUEB2G100( ) 200 500

22 12.5 25 410 0.245000 0.6 5.0 5.0 EEUEB2G220( ) 200 500

16 20 410 0.24 5000 0.8 7.5 7.5 EEUEB2G220S( ) 100 250

33 16 25 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330( ) 100 250

18 20 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330S( ) 100 250

47 16 31.5 730 0.245000 0.8 7.5 – EEUEB2G470 100 –

18 25 730 0.24 5000 0.8 7.5 7.5 EEUEB2G470S( ) 100 250

450

10 12.5 20 310 0.24 5000 0.6 5.0 5.0 EEUEB2W100( ) 200 500

22 16 25 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220( ) 100 250

18 20 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220S( ) 100 250

33 16 31.5 680 0.245000 0.8 7.5 – EEUEB2W330( ) 100 –

18 25 680 0.24 5000 0.8 7.5 7.5 EEUEB2W330S( ) 100 250

47 18 31.5 850 0.24 5000 0.8 7.5 – EEUEB2W470 50 –

■Standard Prod ucts

Endurance : 105 °C 5000 h

When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.

The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.

Dec. 201001