TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
1/10
Version: D12
TO
-
220
ITO
-
220
General Description
The TS7800 series voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a
wide variety of applications including local, on-card regulation. These regulators employ internal current limiting,
thermal shutdown, and safe-area compensation. With adequate heatsink they can deliver output currents up to 1
ampere. Although designed primarily as a fixed voltage regulator, these devices can be used with external
components to obtain adjustable voltages and currents.
Features
● Output Voltage Range 5 to 24V
● Output current up to 1A
● No external components required
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
●
Output voltage offered in 4% tolerance
Standard Application Circuit
A common ground is required between the input and the
output voltages. The input voltage must remain typically
2.0V above the output voltage even during the low point on
the Input ripple voltage.
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does improve
transient response
.
Ordering Information
Part No. Package Packing
TS78xxCZ C0 TO-220 50pcs / Tube
TS78xxCI C0 ITO-220 50pcs / Tube
Note: Where xx denote voltage option, available are:
05=5V, 06=6V, 08=9V, 09=9V, 10=10V
12=12V, 15=15V, 18=18V, 24=24V
Absolute Maximum Rating
(Ta = 25
o
C unless otherwise noted)
Parameter Symbol Limit Unit
Input Voltage V
OUT
=5~18V V
IN
35 V
V
OUT
=24V 40
Output Current I
OUT
Internal Limited
Power Dissipation P
D
Internal Limited
Operating Junction Temperature T
J
0~+125
o
C
Storage Temperature Range T
STG
-65~+150
o
C
Thermal Resistance - Junction to Case TO-220 RӨ
JC
5
o
C/W
ITO-220 5
Thermal Resistance - Junction to Ambient TO-220 RӨ
JA
50
o
C/W
ITO-220 60
Note: Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these condition is not implied.
Pin
Definition
:
1. Input
2. Ground (tab)
3. Output
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
2/10
Version: D12
TS7805 Electrical Characteristics
(Vin=10V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output voltage Vout Tj=25
o
C 4.80 5 5.20 V
7.5V≤Vin≤20V,
10mA≤Iout≤1A, PD≤15W 4.75 5 5.25
Line Regulation REGline Tj=25
o
C 7.5V≤Vin≤25V -- 3 100
mV
8V≤Vin≤12V -- 1 50
Load Regulation REGload Tj=25
o
C 10mA≤Iout≤1A -- 15 100
250mA≤Iout≤750mA
-- 5 50
Quiescent Current Iq Iout=0, Tj=25
o
C -- 4.2 8 mA
Quiescent Current Change ∆Iq 7.5V≤Vin≤25V -- -- 1.3
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 40 -- µV
Ripple Rejection Ratio RR f=120Hz, 8V≤Vin≤18V 62 78 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 17 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 750 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -0.6 -- mV/
o
C
TS7806 Electrical Characteristics
(Vin=11V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output Voltage Vout Tj=25
o
C 5.75 6 6.25 V
8.5V≤Vin≤21V,
10mA≤Iout≤1A, PD≤15W 5.7 6 6.3
Line Regulation REGline Tj=25
o
C 8.5V≤Vin≤25V -- 5 120
mV
9V≤Vin≤13V -- 1.5 60
Load Regulation REGload Tj=25
o
C 10mA≤Iout≤1A -- 14 120
250mA≤Iout≤750mA
-- 4 60
Quiescent Current Iq Iout=0, Tj=25
o
C -- 4.3 8 mA
Quiescent Current Change ∆Iq 8.5V≤Vin≤25V -- -- 1.3
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 45 -- uV
Ripple Rejection Ratio RR f=120Hz, 9V≤Vin≤19V 59 75 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 19 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 550 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -0.7 -- mV/
o
C
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
3/10
Version: D12
TS7808 Electrical Characteristics
Vin=14V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output voltage Vout Tj=25
o
C 7.69 8 8.32 V
10.5V≤Vin≤23V,
10mA≤Iout≤1A, PD≤15W 7.61 8 8.40
Line Regulation REGline Tj=25
o
C 10.5V≤Vin≤25V -- 6 160
mV
11V≤Vin≤17V -- 2 80
Load Regulation REGload Tj=25
o
C
10mA≤Iout≤1A -- 12 160
250mA≤Iout≤750m
A -- 4 80
Quiescent Current Iq Iout=0, Tj=25
o
C -- 4.3 8 mA
Quiescent Current Change ∆Iq 10.5V≤Vin≤25V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 52 -- µV
Ripple Rejection Ratio RR f=120Hz, 11V≤Vin≤21V 56 72 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 16 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 450 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -0.8 -- mV/
o
C
TS7809 Electrical Characteristics
(Vin=15V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output Voltage Vout Tj=25
o
C 8.65 9 9.36 V
11.5V≤Vin≤23V,
10mA≤Iout≤1A, PD≤15W 8.57 9 9.45
Line Regulation REGline Tj=25
o
C 11.5V≤Vin≤26V -- 6 180
mV
12V≤Vin≤17V -- 2 90
Load Regulation REGload Tj=25
o
C 10mA≤Iout≤1A -- 12 180
250mA≤Iout≤750mA -- 4 90
Quiescent Current Iq Iout=0, Tj=25
o
C -- 4.3 8 mA
Quiescent Current Change ∆Iq 11.5V≤Vin≤26V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 52 -- uV
Ripple Rejection Ratio RR f=120Hz, 12V≤Vin≤22V 55 72 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 16 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 450 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -1 -- mV/
o
C
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
4/10
Version: D12
TS7810 Electrical Characteristics
Vin=16V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output voltage Vout Tj=25
o
C 9.6 10 10.4 V
12.5V≤Vin≤25V,
10mA≤Iout≤1A, PD≤15W 9.5 10 10.5
Line Regulation REGline Tj=25
o
C
12.5V≤Vin≤28V -- 7 200
mV
13V≤Vin≤17V -- 2 100
Load Regulation REGload Tj=25
o
C
10mA≤Iout≤1A -- 12 200
250mA≤Iout≤750m
A -- 4 100
Quiescent Current Iq Iout=0, Tj=25
o
C -- 4.3 8 mA
Quiescent Current Change ∆Iq 12.5V≤Vin≤28V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 70 -- µV
Ripple Rejection Ratio RR f=120Hz, 13V≤Vin≤23V 55 71 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 18 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 400 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -1 -- mV/
o
C
TS7812 Electrical Characteristics
(Vin=19V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output Voltage Vout Tj=25
o
C 11.53
12 12.48
V
14.5V≤Vin≤27V,
10mA≤Iout≤1A, PD ≤15W 11.42
12 12.60
Line Regulation REGline Tj=25
o
C
14.5V≤Vin≤30V -- 10 240
mV
15V≤Vin≤19V -- 3 120
Load Regulation REGload Tj=25
o
C
10mA≤Iout≤1A -- 12 240
250mA≤Iout≤750mA
-- 4 120
Quiescent Current Iq Tj=25
o
C, Iout=0 -- 4.3 8 mA
Quiescent Current Change ∆Iq 14.5V≤Vin≤30V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 75 -- uV
Ripple Rejection Ratio RR f=120Hz, 15V≤Vin≤25V 55 71 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 18 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 350 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -1 -- mV/
o
C
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
5/10
Version: D12
TS7815 Electrical Characteristics
Vin=23V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output voltage Vout Tj=25
o
C 14.42
15 15.60
V
17.5V≤Vin≤30V,
10mA≤Iout≤1A, PD ≤15W 14.28
15 15.75
Line Regulation REGline Tj=25
o
C
17.5V≤Vin≤30V -- 12 300
mV
18V≤Vin≤22V -- 3 150
Load Regulation REGload Tj=25
o
C
10mA≤Iout≤1A -- 12 300
250mA≤Iout≤750mA
-- 4 150
Quiescent Current Iq Tj=25
o
C, Iout=0 -- 4.3 8 mA
Quiescent Current Change ∆Iq 17.5V≤Vin≤30V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 90 -- µV
Ripple Rejection Ratio RR f=120Hz, 18V≤Vin≤28V 54 70 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 19 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 230 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -1 -- mV/
o
C
TS7818 Electrical Characteristics
(Vin=24V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output Voltage Vout Tj=25
o
C 17.30
18 18.72
V
21V≤Vin≤33V, 10mA≤Iout≤1A,
PD ≤15W 17.14
18 18.90
Line Regulation REGline Tj=25
o
C
21V≤Vin≤33V -- 15 360
mV
22V≤Vin≤26V -- 5 180
Load Regulation REGload Tj=25
o
C
10mA≤Iout≤1A -- 12 360
250mA≤Iout≤750mA
-- 4 180
Quiescent Current Iq Tj=25
o
C, Iout=0 -- 4.5 8 mA
Quiescent Current Change ∆Iq 21V≤Vin≤33V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 110 -- uV
Ripple Rejection Ratio RR f=120Hz, 21V≤Vin≤31V 54 70 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 22 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 200 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -1 -- mV/
o
C
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
6/10
Version: D12
TS7824 Electrical Characteristics
Vin=33V, Iout=500mA, 0
o
C≤Tj≤125
o
C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter Symbol Test Condition Min Typ Max Unit
Output voltage Vout Tj=25
o
C 23.07
24 24.96
V
27V≤Vin≤38V, 10mA≤Iout≤1A,
PD ≤15W 22.85
24 25.20
Line Regulation REGline Tj=25
o
C
27V≤Vin≤38V -- 18 480
mV
28V≤Vin≤32V -- 6 240
Load Regulation REGload Tj=25
o
C
10mA≤Iout≤1A -- 12 480
250mA≤Iout≤750mA
-- 4 240
Quiescent Current Iq Iout=0, Tj=25
o
C -- 4.6 8 mA
Quiescent Current Change ∆Iq 27V≤Vin≤38V -- -- 1
10mA≤Iout≤1A -- -- 0.5
Output Noise Voltage Vn 10Hz≤f≤100KHz, Tj=25
o
C -- 170 -- µV
Ripple Rejection Ratio RR f=120Hz, 27V≤Vin≤37V 54 70 -- dB
Voltage Drop Vdrop Iout=1.0A, Tj=25
o
C -- 2 -- V
Output Resistance Rout f=1KHz -- 28 -- mΩ
Output Short Circuit Current
Ios Tj=25
o
C -- 150 -- mA
Peak Output Current Io peak Tj=25
o
C -- 2.2 -- A
Temperature Coefficient of
Output Voltage ∆Vout/ ∆Tj
Iout=10mA, 0
o
C≤Tj≤125
o
C -- -1.5 -- mV/
o
C
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
7/10
Version: D12
Electrical Characteristics Curve
Figure 1. Peak Output Current as a Function of
Input-Output Differential Voltage
Figure 2. Ripple Rejection as a Function of
Output Voltage
Figure 3. Ripple Rejection as a Function of
Frequency
Figure 4. Output Voltage as a Function of
Junction Temperature
Figure 5. Output Impedance as a Function of
Output Voltage
Figure 6. Quiescent Current as a Function of
Temperature
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
8/10
Version: D12
TO-220 Mechanical Drawing
Marking Diagram
XX
= Output Voltage
(05=5V, 06=6V, 08=8V, 09=9V, 10=10V, 12=12V, 15=15V, 18=18V, 24=24V)
Y
= Year Code
M
= Month Code
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,
J=Oct, K=Nov, L=Dec)
L
= Lot Code
CZ
= Package Code for TO
-220
TO-220 DIMENSION
DIM
MILLIMETERS INCHES
MIN MAX MIN MAX
A 9.31 10.50 0.367 0.413
B 3.74 3.91 0.147 0.154
C 2.36 3.24 0.093 0.128
D 2.22 3.22 0.087 0.127
E 0.78 0.98 0.031 0.039
F -- 2.65 -- 0.104
G -- 5.30 -- 0.209
H 12.32 13.88 0.485 0.546
I 8.74 9.26 0.344 0.365
J 15.07 16.47 0.593 0.648
K 4.35 4.65 0.171 0.183
L 1.16 1.40 0.046 0.055
M 28.37 30.35 1.117 1.195
N 1.78 2.67 0.070 0.105
O 0.255 0.610 0.010 0.024
P 5.75 7.65 0.226 0.301
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
9/10
Version: D12
ITO-220 Mechanical Drawing
Marking Diagram
XX
= Output Voltage
(05=5V, 06=6V, 08=8V, 09=9V, 10=10V, 12=12V, 15=15V, 18=18V, 24=24V)
Y
= Year Code
M
= Month Code
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,
J=Oct, K=Nov, L=Dec)
L
= Lot Code
CI
= Package Code for ITO
-220
ITO-220 DIMENSION
DIM
MILLIMETERS INCHES
MIN MAX MIN MAX
A 9.96 10.36 0.392 0.407
B 6.20 (typ.) 0.244 (typ.)
C 2.20 (typ.) 0.087 (typ.)
D ∮1.40 (typ.) ∮0.055 (typ.)
E 15.07 16.07 0.593 0.632
F 0.80 (typ.) 0.031 (typ.)
G 2.44 2.64 0.096 0.104
H 13.08 13.48 0.514 0.530
I 1.47 (max.) 0.057 (max.)
J 3.20 3.40 0.125 0.133
K 4.60 4.80 0.181 0.188
L 1.15 (typ.) 0.045 (typ.)
M 2.44 2.64 0.096 0.104
N 2.60 2.80 0.102 0.110
O 6.55 6.65 0.258 0.262
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
10/10
Version: D12
Notice
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,
assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, to
any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of
sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty,
relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify TSC for any damages resulting from such improper use or sale.
