Reed ReedSensors Sensors Flange Flange Mounting Mounting Sensor Sensor > 59135 > 59135 59135 High Temperature Flange Mount Sensor + 57135 Actuator Description The 59135 is a high temperature flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.259") with a choice of normally open, normally open high voltage, normally closed or changeover contacts. It's case design enables screw or adhesive mounting. It is rated for operation up to 150C. It is capable of switching up to 265Vac/300Vdc at 10VA. The 59135 functions best with the matching actuator 57135-000. Sensors Note: The 57135 Actuator is sold separately. Actuator Features * Two-part magnetically operated proximity sensor * High temperature rated * Cross-slotted mounting holes for optimum adjustability Agency Approvals Agency Agency File Number * Customer defined sensitivity option * Choice of cable length and connector * Thermoset overmold material * Teflon insulated wires Benefits E61760 * Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Note: Contact Littelfuse for specific agency approval ratings. Dimensions * No standby power requirement * Operates through non-ferrous materials such as wood, plastic or aluminium Dimensions in mm (inch) Applications Actuator 28.57 (1.125) * Position and limit sensing * Security system switch 9.53 (.375) 10.31 (.406) 19.05 (.75) 3.18x7.82 (.125x.308 LG.) SLOT 2 15.88 (.625) * Linear actuators * Door switch 3.43 (.135) 6.35 (.250) Sensor 300 (11.81) 28.57 (1.125) 6.35 (.250) 6.35 (.250) NOM. 9.53 (.375) 14.28 (.562) 3.18x7.82 (.125x.308 LG.) SLOT 2 19.05 (.75) 3.96x8.71 (.156x.343 LG.) 15.88 (.625) Schematics 3.43 (.135) 6.35 (.250) Switch Type Red Red Red Blue White Red Red (c) 2019 Littelfuse Revised: 02/08/19 Specifications are subject to change without notice. 1 and 2 3 4 littelfuse.com Reed ReedSensors Sensors Flange FlangeMounting MountingSensor Sensor>>59135 59135 59135 High Temperature Flange Mount Sensor + 57135 Actuator Electrical Ratings Contact Type Switch Type Contact Rating Normally Open Normally Open High Voltage Change Over Normally Closed 1 2 3 4 VA/Watt - max. 10 10 5 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 0.25 0.18 1.5 Contact, Initial Insulation - max. - min. 0.2 1010 0.2 1010 0.2 109 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating C -40 to +150 -20 to +150 -40 to +150 -40 to +150 ms - max. 1.0 1.0 3.0 3.0 Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 Release Time 6 Shock 7 Vibration 7 ms - max. 1.0 1.0 3.0 3.0 11ms 12 sine G - max. 100 100 50 50 50-2000 Hz G - max. 30 30 30 30 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57135 Actuator) Select Option Switch Type 1 Normally Open S T U V Distance-D Pull-In Activate Distance-D Pull-In Activate Distance-D Pull-In Pull-In Activate mm (inch) mm (inch) mm (inch) AT Range AT Range AT Range AT Range Average Average Average Activate Distance-D mm (inch) Average 12-18 18.5 (.729) 17-23 17.1 (.673) 22-28 15.8 (.622) 27-33 15.1 (.595) 2 High Voltage -- -- 17-23 17.1 (.673) 22-28 15.8 (.622) 27-33 15.1 (.595) 3 Change Over 15-20 16.7 (.657) 20-25 14.7 (.579) 25-30 13.4 (.528) -- -- 15-20 16.7 (.657) 20-25 14.7 (.579) 25-30 13.4 (.528) -- -- 4 Normally Closed D Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. (c) 2019 Littelfuse Revised: 02/08/19 Specifications are subject to change without notice. Sensor Actuator 2. The activation distance is average value on the final sensor assembly littelfuse.com Reed Sensors Reed Sensors Flange Flange Mounting Mounting Sensor Sensor >> 59135 59135 59135 High Temperature Flange Mount Sensor + 57135 Actuator Part Numbering System Cable Length Specification Sensor: Cable Type: 20 AWG 19/32 FEP UL1130/UL1332 Select Option Cable Length mm (inch) 02 300 (11.81) 59135 - X - X - XX - X Series Termination Specification Switch Type 1, 2, 3, or 4 Termination Options Select Option Sensitivity S, T, U, or V Description (Two-wire versions illustrated) A Tinned leads (6.40.76)mm F Untinned leads (6.40.76)mm E JST type XHP 2.5mm pitch Cable Length 02 Termination A, E, or F Actuator: 57135 - 000 Series Standard Actuator 000 Note: The 57135 Actuator is sold separately. Packaging Packaging Option Bulk Packaging Specification Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics. (c) 2019 Littelfuse Revised: 02/08/19 Specifications are subject to change without notice. littelfuse.com