SMT COMMON MODE CHOKES 1.22A to 14.0A Solutions based on impedance, size and current Designed for DC/DC converters Wide variety of inductor sizes and current ratings available Dielectric strength: 1000VRMS Electrical Specifications @ 25C -- Operating Temperature -40C to +120C 3 DCR (MAX) (m) Curve (see # below) Package Weight (Grams) Quantity In Tube Quantity In Reel 14.0 8 9 Big Foot 14.8 15 75 11.6 10 7 Big Foot 14.3 20 75 0.81 9.70 14 6 Big Foot 13.5 20 75 P0527 0.53 7.20 15 8 HCCI-68 7.7 15 100 P0353 0.59 5.60 21 7 LCCI-50 5.2 30 200 P0422 0.77 4.70 40 6 LCCI-50 4.9 30 200 P0421 0.22 3.30 60 5 LCCI-50 4.7 30 200 P0420 1.32 3.30 60 4 LCCI-50 4.6 30 200 P0351 1.47 2.80 80 3 LCCI-50 4.3 30 200 P0473 0.88 1.63 110 2 Polecat 1.5 40 500 P0354 1.17 1.22 200 1 Polecat 1.4 40 500 Part 1,2 Number Inductance (mH 35%) Irated (A) P0502 0.47 P0469 0.63 P0429 NOTE: 1. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. P0502 becomes P0502T). Pulse complies to industry standard tape and reel specification EIA481. 2. To order RoHS compliant part, add the suffix "NL" to the part number (i.e. P0502 becomes P0502NL and P0502T becomes P0502NLT). 3. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Impedance Curves 15K 7.5K 12K 6.0K 3 5 4 Impedance () Impedance () 6 9K 1 2 6K 3K 7 4.5K 9 8 3.0K 1.5K 0 0 100 KHz 1 MHz 10 MHz 100 MHz 100 KHz Frequency 1 MHz 10 MHz 100 MHz Frequency USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 116 SPM2007 (7/07) SMT COMMON MODE CHOKES 1.22A to 14.0A Mechanicals Polecat LCCI-50 .500 MAX 12,70 1 3 1 4X .500 MAX 12,70 .175 4X 4,45 4 2 3 1 .060 1,52 1 4X .410 10,41 2 4 4 .175 4,45 R 3 .650 16,51 4 Suggested Pad Layout .215 MAX 5,46 .390 MAX 9,91 .410 10,41 .330 8,38 .005/0,13 4 SURFACES HCCI-68 .650 MAX 16,51 .445 11,30 .770 MAX 19,56 Big Foot 4X .080 2,03 1.000 25,40 .060 1,52 2 Suggested Pad Layout .005/0,13 4 SURFACES 4X R 3 2 .445 11,30 .670 MAX 17,02 .330 8,38 1 3 4 2 4X .300 7,62 1 R 3 4 2 1.100 27,94 1 3 .620 15,75 3 1 .600 15,24 1.000 MAX 25,40 2 4 2 4 1.000 25,40 .155 3,94 Suggested Pad Layout Suggested Pad Layout 1.220 MAX 30,99 .500 MAX 12,70 .395 MAX 10,03 1.000 .015 25,40 0,38 1.110 MAX 28,19 .400 10,16 1.100 27,94 .005/0,13 4 SURFACES .006/0,15 4 SURFACES Schematic Dimensions: Inches mm Unless otherwise specified, all tolerances are .005 0,13 1 3 2 4 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 117 SPM2007 (7/07)