HMC544 / 544E v00.0206 GaAs MMIC T/R SWITCH, DC - 4 GHz Typical Applications Features The HMC544 / HMC544E is ideal for: Very Low Insertion Loss: 0.2 dB @ 1.0 GHz * Cellular/PCS/3G Infrastructure High Input P1dB: +39 dBm * Basestations & Repeaters High Input IP3: +55 dBm * WLAN, WiMAX and WiBro Positive Control: 0/+3V to 0/+5V * Microwave and Fixed Wireless Radios Compact SOT26 SMT Package Functional Diagram General Description 10 SWITCHES - SMT The HMC544 & HMC544E are low cost SPDT switches in 6-lead SOT26 packages for use in transmitreceive applications which require very low insertion loss at medium power levels. These devices can control signals from DC to 4.0 GHz and are especially suited for 450, 900, 1900, 2300, and 2700 MHz applications with <0.5 dB insertion loss. This GaAs PHEMT design provides exceptional linearity performance of +36 dBm 1dB compression point and +55 dBm third order intercept at +3 volt bias. RF1 and RF2 are reflective opens when "Off". On-chip circuitry allows positive control operation at very low DC current. Electrical Specifi cations, TA = +25 C, Vctl = 0/+3 Vdc, 50 Ohm System Parameter Frequency Insertion Loss DC - 1.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 4.0 GHz Isolation DC - 1.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 4.0 GHz Return Loss 18 10 9 8 DC - 4.0 GHz 0/+5V Control 0/+3V Control Input Power for 1 dB Compression 0.3 - 4.0 GHz Input Third Order Intercept (Two-Tone Input Power = +27 dBm Each Tone) 0.3 - 4.0 GHz Switching Characteristics DC - 4.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 300 Min. 36 33 Typ. Max. Units 0.25 0.4 0.5 0.7 0.5 0.7 0.8 1.0 dB dB dB dB 23 14 13 12 dB dB dB dB 32 dB 39 36 dBm dBm 55 dBm 70 140 ns ns For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC544 / 544E v00.0206 GaAs MMIC T/R SWITCH, DC - 4 GHz Insertion Loss Return Loss 0 -10 -0.5 RETURN LOSS (dB) -1 +25C +85C -40C -1.5 RFC RF1, RF2 -20 -30 -40 -2 -50 0 0.5 1 1.5 2 2.5 3 3.5 4 0 4.5 0.5 1 1.5 FREQUENCY (GHz) 0 0 -5 -5 -10 -10 -15 -20 RF1 RF2 3 3.5 4 4.5 10 -15 -20 -25 -30 -30 -35 -35 -40 RF1 ON RF2 ON -40 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 0.5 1 1.5 FREQUENCY (GHz) 2.5 3 3.5 4 4.5 Input IP3 vs. Vctl 65 60 60 INPUT IP3 (dBm) 65 55 50 +25C +85C -40C 45 2 FREQUENCY (GHz) Input IP3 vs. Temperature, Vctl = 0/+3V INPUT IP3 (dBm) 2.5 Isolation Between Ports RF1 & RF2 ISOLATION (dB) ISOLATION (dB) Isolation Between Ports RFC & RF1 / RF2 -25 2 FREQUENCY (GHz) SWITCHES - SMT INSERTION LOSS (dB) 0 55 +3V +5V 50 45 40 40 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 301 HMC544 / 544E v00.0206 GaAs MMIC T/R SWITCH, DC - 4.0 GHz Input P1dB vs. Temperature, Vctl = 0/+3V Compression vs. Vctl 45 INPUT P0.1dB & P1dB (dBm) 45 INPUT P1dB (dBm) 40 35 +25C +85C -40C 30 25 20 0.5 1 1.5 30 P0.1dB +3V P0.1dB +5V P1dB +3V P1dB +5V 25 2 2.5 3 3.5 4 0 0.5 FREQUENCY (GHz) 10 SWITCHES - SMT 35 20 0 10 - 302 40 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) Truth Table Control Voltages Control Input Signal Path A B RFC to RF1 RFC to RF2 Low High High On Off Low Off On State Bias Condition Low 0 to 0.2 Vdc @ 1 A Typical High +3 Vdc @ 0.5 A Typical to +5 Vdc @ 2 A Typical (0.2 Vdc) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC544 / 544E v00.0206 GaAs MMIC T/R SWITCH, DC - 4.0 GHz Absolute Maximum Ratings RF Input Power (Vctl = 0/+5V) +39 dBm Control Voltage Range (A & B) -0.2 to +12 Vdc Hot Switch Power Level (Vctl = 0/+5V) +39 dBm Channel Temperature 150 C Continuous Pdiss (T= 85 C) (derate 7.14 mW/ C above 85C) 0.465 W Thermal Resistance 140 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS DC blocks are required at ports RFC, RF1 and RF2. 10 SWITCHES - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC544 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC544E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H544 XXXX [2] 544E XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 303 HMC544 / 544E v00.0206 GaAs MMIC T/R SWITCH, DC - 4.0 GHz Typical Application Circuit SWITCHES - SMT 10 Notes: 1. Set logic gate Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3V to +5V applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. Pin Descriptions 10 - 304 Pin Number Function Description 1, 3, 5 RF2, RF1, RFC These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 2 GND This pin must be connected to RF/DC ground. 4 B See truth and control voltage tables. 6 A See truth and control voltage tables. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC544 / 544E v00.0206 GaAs MMIC T/R SWITCH, DC - 4.0 GHz Evaluation Circuit Board SWITCHES - SMT 10 List of Materials for Evaluation PCB 101675 [1] Item Description J1 - J5 PCB Mount SMA RF Connector J6 - J8 DC Pin C1 - C5 330 pF capacitor, 0402 Pkg. U1 HMC544 / HMC544E SPDT Switch PCB [2] 101659 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 * Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 305 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: 101675-HMC544