Ordering number:ENN1334D PNP/NPN Epitaxial Planar Silicon Transistors 2SA1319/2SC3332 High-Voltage Switching Applications Features Package Dimensions * Hgih breakdown voltage. * Excellent hFE linearity. * Wide ASO and highly resistant to breakdown. * Adoption of MBIT process. unit:mm 2003B [2SA1319/2SC3332] 5.0 4.0 4.0 5.0 Switching Test Circuit IB1 OUTPUT RB RL 333 IB2 VR 0.45 0.44 14.0 INPUT 0.45 0.5 0.6 2.0 PW=20s D.C.1% 50 + 100F + 470F 1 2 1 : Emitter 2 : Collector 3 : Base SANYO : NP 3 100V --5V 20IB1=--20IB2=IC=300mA (For PNP, the polarity is reversed.) ( ) : 2SA1319 1.3 1.3 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (-)180 Collector-to-Emitter Voltage VCEO (-)160 V Emitter-to-Base Voltage VEBO IC (-)6 V Collector Current Collector Current (Pulse) ICP PC Collector Dissipation Junction Temperature Tj Storage Temperature Tstg V (-)0.7 A (-)1.5 A 700 mW 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain Conditions ICBO IEBO VCB=(-)120V, IE=0 VEB=(-)4V, IC=0 hFE1 VCE=(-)5V, IC=(-)100mA VCE=(-)5V, IC=(-)10mA hFE2 Ratings min 100* R S T hFE 100 to 200 140 to 280 200 to 400 max Unit (-)0.1 A (-)0.1 A 400* 80 * : The 2SA1319/2SC3332 are classified by 100mA hFE as follows : Rank typ Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 83002TN (KT)/71598HA (KT)/3207KI/N257KI/3135KI/O183KI, TS No.1334-1/4 2SA1319/2SC3332 Continued from preceding page. Parameter Symbol Gain Bandwidth Product Base-to-Emitter Saturation Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage IC=(-)250mA, IB=(-)25mA (0.20) 0.12 (0.5) 0.4 V (-)0.85 (-)1.2 V Turn-ON Time Storage Time tstg tf Fall Time (60)60 ns IC -- VCE From top 100mA 90mA 80mA 70mA 60mA 700 --120mA --80mA Collector Current, IC - mA Collector Current, IC - mA V See specified Test Circuit --60mA --20mA --200 --100 600 500 2SC3332 Pulse A 50m 40mA 30mA 20mA 400 10mA 300 200 100 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE - V 0 IB=0 --1.0 0.2 0.4 --400 --1.5mA --300 --1.0mA --200 0.8 1.0 2SC3332 Pulse 4.0mA 3.5mA 3.0mA 800 2.5mA 600 2.0mA 1.5mA 400 1.0mA 200 --0.5mA --100 0.5mA IB=0 --10 --20 --30 --40 --50 --60 --70 --80 Collector-to-Emitter Voltage, VCE - V ITR03220 0 32 2SA 1319 2SC3 3 600 400 200 For PNP, minus sign is omitted. 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE - V 1.0 1.2 ITR03222 IB=0 0 10 20 30 40 50 60 70 Collector-to-Emitter Voltage, VCE - V Common Base Output Capacitance, Cob - pF VCE=5V 800 0 0 IC -- VBE 1000 ITR03219 IC -- VCE 2SA1319 Pulse --3.0mA --2.5mA --2.0mA --500 0.6 Collector-to-Emitter Voltage, VCE - V Collector Current, IC - mA Collector Current, IC - mA --600 IB=0 0 1000 --5.0mA --4.5mA --4.0mA --3.5mA --700 0 ITR03218 IC -- VCE --800 Collector Current, IC - mA V (-)6 ns --40mA 0 V (-)160 (900) 1000 --400 0 (-)180 See specified Test Circuit 2SA1319 Pulse --300 pF ns 800 --500 MHz (60)50 IC -- VCE --600 120 Unit VCE(sat) IE=(-)10A, IC=0 See specified Test Circuit --700 max (11)8 V(BR)EBO ton From top --200mA --180mA --160mA --140mA typ VCE=(-)10V, IC=(-)50mA VCB=(-)10V VBE(sat) IC=(-)250mA, IB=(-)25mA V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= Collector-to-Base Breakdown Voltage --800 min fT Cob Common Base Output Capacitance Collector-to-Emitter Saturation Voltage Ratings Conditions 80 ITR03221 Cob -- VCB 100 7 5 3 2 2SA 131 9 2SC 333 2 10 7 5 3 2 1.0 5 7 1.0 2 3 5 7 10 2 3 5 7 Collector-to-Base Voltage, VCB -- V 2 100 ITR03223 No.1334-2/4 2SA1319/2SC3332 BE hFE -- IC 1000 5 2 3 5 7 --10 3 2 3 5 7 --100 2 Collector Current, IC - mA 2 3 2 3 5 7 10 2 3 5 7 100 2 3 5 Collector Current, IC - mA ITR03224 fT -- IC 5 Gain-Bandwidth Product, fT - MHz 7 --1000 5 3 2 VC E =10 V 5V 100 7 5 3 2 5 7 2 3 5 7 --100 2 Collector Current, IC - mA --10 3 5 7 2SC3332 1.0 13 19 5 2S A 32 3 C3 2S For PNP, minus sign is omitted. 5 7 10 2 3 5 7 100 2 3 2 5 7 2 10 3 5 7 3 2 100 5 7 1000 ITR03227 ASO Ta=25C Single pulse ICP 1m 10 s ms 1000 10 5 0m s 3 2 DC 100 op era tio 5 3 2 n 10 5 3 5 3 2 Collector Current, IC - mA 2 3 7 5 3 0.1 5V 100 Collector Current, IC - mA IC / IB=10 2 V V CE=10 2 ITR03226 5 3 3 10 --1000 VCE(sat) -- IC 10 7 1000 2 ITR03225 fT -- IC 5 2SA1319 Gain-Bandwidth Product, fT - MHz 3 Collector-to-Emitter Saturation Voltage, VCE (sat) - V V 5 3 Collector Current, IC - mA 5 7 1000 2 ITR03228 5 3 1.0 2 3 5 7 10 2 3 5 7 100 Collector-to-Emitter Voltage, VCE - V 2 3 ITR03229 PC -- Ta 800 Collector Dissipation, PC - mW 10V 5V 3 7 5 7 2 5 10 10 10 7 =2 E 2V 2 100 VC =-E 3 --10V VC 5 DC Current Gain, hFE 3 7 2SC3332 Pulse 5 2 100 CB 7 3 --5V DC Current Gain, hFE 1000 2SA1319 Pulse 7 g hFE -- IC 600 400 200 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR03230 No.1334-3/4 2SA1319/2SC3332 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2002. Specifications and information herein are subject to change without notice. PS No.1334-4/4