HDSP-4830, HDSP-4840, HDSP-4850,
HDSP-4832, HDSP-4836 & HLCP-J100
10-Element Bar Graph Array
Data Sheet
Description
These 10-element LED arrays are designed to display
information in easily recognizable bar graph form. The
packages are end stackable and therefore capable of
displaying long strings of information. Use of these bar
graph arrays eliminates the alignment, intensity, and
color matching problems associated with discrete LEDs.
The HDSP-4830/4840/4850 and HLCPJ100 each contain
LEDs of one color. The HDSP-4832/4836 are multicolor
arrays with High Eciency Red, Yellow, and High Perfor-
mance Green LEDs in a single package.
Applications
• Industrial Controls
• Instrumentation
• Oce Equipment
• Computer Peripherals
• Consumer Products
Package Dimensions
Features
• Custom Multicolor Array Capability
• Matched LEDs for Uniform Appearance
• End Stackable
• Package Interlock Ensures Correct Alignment
• Low Prole Package
• Rugged Construction
• Large, Easily Recognizable Segments
• High ON-OFF Contrast, Segment to Segment
• Wide Viewing Angle
• Categorized for Luminous Intensity
• HDSP-4832/4836/4840/4850 Categorized for Domi-
nant Wavelength
• HLCP-J100 Operates at Low Current
Typical Intensity of 1.0 mcd at 1 mA Drive Current
5.08 (0.200)
25.40
(1.000)
0.38
(0.015)
10.16
(0.400)
2.54
(0.100)
1.52
(0.060)
0.61
(0.024) 2.54 ± 0.25
(0.100 ± 0.010)
4.06
(0.160)
MIN.
5.08 (0.200)
6.10 ± 0.25
(0.240 ± 0.010)
7.62 ± 0.38
(0.300 ± 0.015)
0.38
(0.015)
HDSP XXXX
XYY
DATE CODE
LUMINOUS
INTENSITY
CATEGORY
COLOR BIN
(NOTE 3)
1. DIMENSIONS IN MILLIMETERS (INCHES).
2. ALL UNTOLERANCED DIMEMSIONS FOR
REFERENCE ONLY.
3. HDSP-4832/-4836/-4840/-4850 ONLY.
PIN ONE
MARKING
ZW
2
Internal Circuit Diagram
Absolute Maximum Ratings [1]
Parameter
AlGaAs Red
HLCP-J100
HER
HDSP-4830
Yellow
HDSP-4840
Green
HDSP-4850
Average PowerDissipation per LED
(T
A = 25°C)
37 mW 87 mW 50 mW 105 mW
Peak Forward Current per LED 45 mA[3] 90 mA[4] 60 mA[4] 90 mA[4]
DC Forward Current per LED 15 mA[5] 30 mA[6] 20 mA[6] 30 mA[6]
Operating Temperature Range -20°C to +100°C -40°C to +85°C -20°C to +85°C
Storage Temperature Range -55°C to +100°C -40°C to +85°C
Reverse Voltage* per LED 5.0 V 3.0 V
Lead Solder Dipping Temperature
(1.59 mm (1/16 inch) below seating plane) [7] 260°C for 5 seconds [8]
Wave Soldering Temperature
(at 2 mm distance from the body)
250°C for 3 seconds
* reverse voltage is for LED testing purposes and is not recommended to be used as an application condition.
Notes:
1. Absolute maximum ratings for HER, Yellow, and Green elements of the multicolor arrays are identical to the HDSP-4830/4840/4850 maximum
ratings.
2. See Figure 1 to establish pulsed operating conditions. Maximum pulse width is 1.5 ms.
3. See Figure 2 to establish pulsed operating conditions. Maximum pulse width is 1.5 ms.
4. See Figure 8 to establish pulsed operating conditions. Maximum pulse width is 2 ms.
5. Derate maximum DC current for Red above TA = 62°C at 0.79 mA/°C, and AlGaAs Red above TA = 91°C at 0.8 mA/°C. See Figure 3.
6. Derate maximum DC current for HER above TA = 48°C at 0.58 mA/ °C, Yellow above TA = 70°C at 0.66 mA/°C, and Green above TA = 37°C at 0.48
mA/°C. See Figure 9.
7. Clean only in water, isopropanol, ethanol, Freon TF or TE (or equivalent), or Genesolve DI-15 (or equivalent).
8. Maximum tolerable component side temperature is 134°C during solder process.
1 20
a
10 11
j
2 19
3 18
4 17
5 16
6 15
7 14
8 13
9 12
b
c
d
e
f
g
h
i
Pin Function Pin Function
1 Anode a 11 Cathode j
2 Anode b 12 Cathode I
3 Anode c 13 Cathode h
4 Anode d 14 Cathode g
5 Anode e 15 Cathode f
6 Anode f 16 Cathode e
7 Anode g 17 Cathode d
8 Anode h 18 Cathode c
9 Anode i 19 Cathode b
10 Anode j 20 Cathode a
Multicolor Array Segment Colors
Segment
HDSP-4832
Segment Color
HDSP-4836
Segment Color
a HER HER
b HER HER
c HER Yellow
d Yellow Yellow
e Yellow Green
f Yellow Green
g Yellow Yellow
h Green Yellow
i Green HER
j Green HER
3
Electrical/Optical Characteristics at TA = 25°C[4]
AlGaAs Red HLCP-J100
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity per LED
(Unit Average) [1]
IV 600 1000 mcd IF = 1 mA
5200 IF = 20 mA Pk;
1 of 4 Duty Factor
Peak Wavelength λPEAK 645 nm
Dominant Wavelength[2] λd637 nm
Forward Voltage per LED VF 1.6 V IF = 1 mA
1.8 2.2 IF = 20 mA
Reverse Voltage per LED[5] VR 5 1.5 V IR = 100 mA
Temperature Coecient VF per LED DVF/°C -2.0 mV/°C
Thermal Resistance LED Junction-to-Pin RqJ-PIN 300 °C/W/LED
High Eciency Red HDSP-4830
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity per LED (Unit Average)[1,4] IV 900 3500 mcd IF = 10 mA
Peak Wavelength λPEAK 635 nm
Dominant Wavelength[2] λd626 nm
Forward Voltage per LED VF2.1 2.5 V IF = 20 mA
Reverse Voltage per LED[5] VR3 30 V IR = 100 mA
Temperature Coecient VF per LED DVF /°C -2.0 mV/°C
Thermal Resistance LED Junction-to-Pin RqJ-PIN 300 °C/W/LED
Yellow HDSP-4840
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity per LED (Unit Average)[1,4] IV600 1900 mcd IF = 10 mA
Peak Wavelength λPEAK 583 nm
Dominant Wavelength[2,3] λd581 585 592 nm
Forward Voltage per LED VF2.2 2.5 V IF = 20 mA
Reverse Voltage per LED[5] VR3 40 V IR = 100 mA
Temperature Coecient VF per LED DVF/°C -2.0 mV/°C
Thermal Resistance LED Junction-to-Pin RqJ-PIN 300 °C/W/LED
Green HDSP-4850
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity per LED (Unit Average)[1,4] IV 600 1900 mcd IF = 10 mA
Peak Wavelength λPEAK 566 nm
Dominant Wavelength[2,3] λd 571 577 nm
Forward Voltage per LED VF2.1 2.5 V IF = 20 mA
Reverse Voltage per LED[5] VR3 50 V IR = 100 mA
Temperature Coecient VF per LED DVF/°C -2.0 mV/°C
Thermal Resistance LED Junction-to-Pin RqJ-PIN 300 °C/W/LED
Notes:
1. The bar graph arrays are categorized for luminous intensity. The category is designated by a letter located on the side of the package.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which denes the color of the de-
vice.
3. The HDSP-4832/-4836/-4840/-4850 bar graph arrays are categorized by dominant wavelength with the category designated by a number
adjacent to the intensity category letter. Only the yellow elements of the HDSP-4832/-4836 are categorized for color.
4. Electrical/optical characteristics of the High-Eciency Red elements of the HDSP-4832/-4836 are identical to the HDSP-4830 characteristics.
Characteristics of Yellow elements of the HDSP-4832/-4836 are identical to the HDSP-4840. Characteristics of Green elements of the HDSP-
4832/-4836 are identical to the HDSP-4850.
5. Reverse voltage per LED should be limited to 3.0 V max. for the HDSP-4830/-4840/-4850/-4832/-4836 and 5.0 V max. for the HLCP-J100.
4
Red, AlGaAs Red
Figure 7. Relative Luminous Intensity vs. DC For-
ward Current – AlGaAs.
Figure 6. Relative Luminous Intensity vs. DC For-
ward Current – Red.
Figure 5. Forward Current vs. Forward Voltage.Figure 4. Relative Eciency (Luminous Intensity
per Unit Current) vs. Peak Current.
Figure 3. Maximum Allowable DC Current vs.
Ambient Temperature.
TJMAX = 100°C for Red and TJMAX = 110°C for
AlGaAs Red.
Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration
– AlGaAs Red.
Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red.
40
0
5
10
15
20
25
30
35
25 10595857565554535
TA - AMBIENT TEMPERATURE - oC
RED
AlGaAs RED
Rθ = 600¡C/W
J-A
IDC MAX - MAXIMUM DC CURRENT PER SEGMENT - mA
η
PEAK
- RELATIVE EFFICIENCY (NORMALIZED TO
1 AT 20 mA FOR RED: AT 1mA FOR AlGaAs RED)
1.2
0 16010080604020
I
PEAK
- PEAK SEGMENT CURRENT - mA
RED
AlGaAs RED
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
140120
1.5
0
160
100
80
60
40
20
IF - FORWARD CURRENT PER SEGMENT - mA
RED
AlGaAs RED
2.00.5 4.03.53.01.0 2.5
140
120
VF - FORWARD VOLTAGE - V
0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1.0 AT 20 mA)
1.4
0
IF - FORWARD CURRENT PER SEGMENT - mA
5 10 15 20 25
1.2
1.0
0.8
0.6
0.4
0.2
0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 1mA)
0.5 20
20
2
0.1
IF - FORWARD CURRENT PER SEGMENT
15 1 0
10
5
1
0.20.1
For a Detailed Explanation on the Use of Data Sheet Information and Recommended Soldering Procedures,
See Application Note 1005.
20
15
12.5
10
1
1.5
2
3
4
5
6
8
1 1 0 100 1000 10000
tP - PULSE DURATION - µSEC
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF IDCMAX
DC OPERATION
IPEAK MAX RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
300 Hz
1 KHz
3KHz
10 KHz
f - REFRESH RATE
100 Hz
IDC MAX
10
1
2
3
4
5
6
7
9
8
1 1 0 100 1000 10000
tP - PULSE DURATION - µs
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF IDC MAX
DC OPERATION
IPEAK MAx RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
300 Hz
1 KHz
3KHz
10 KHz
f - REFRESH RATE
100 Hz
IDC MAX
5
HER/Yellow/Green.
HER, Yellow, Green
Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration –
Figure 12. Relative Luminous Intensity vs. DC
Forward Current.
Figure 11. Forward Current vs. Forward Voltage.
Figure 10. Relative Eciency (Luminous Intensity
per Unit Current) vs. Peak Current.
Figure 9. Maximum Allowable DC Current vs.
Ambient Temperature. TJMAX = 100°C.
20
15
12
10
1
1.5
2
3
4
6
8
1 1 0 100 1000 10000
tP - PULSE DURATION - µSEC
OPERATION IN
THIS REGION
REQUIRES
TEMPERATURE
DERATING OF
IDC MAX
DC OPERATION
300 Hz
1 KHz
10 KHz
f - REFRESH RATE
100 Hz
IPEAK MAX
IDC MAX
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
3 KHz
GREEN
HER
YELLOW
40
0
5
10
15
20
25
30
35
15 9585756555453525
TA - AMBIENT TEMPERATURE - °C
IDC MAX - MAXIMUM DC CURRENT PER SEGMENT - mA
Rθ = 600°C/W
J-A
GREEN/HER
YELLOW
GREEN HER
YELLOW
1.4
1.1
1.2
1.3
080
70605040302010
IPEAK - PEAK SEGMENT CURRENT - mA
ηPEAK - RELATIVE EFFICIENCY
10090
1.6
1.5 YELLOW SERIES
1.0
0.9
0.8
0.7
0.6
HER SERIES
GREEN SERIES
90
IF - FORWARD CURRENT PER SEGMENT - mA
3.0 5.04.02.0
VF - FORWARD VOLTAGE - V
1.0
80
70
60
50
40
30
20
10
0
GREEN SERIES
HER
SERIES
YELLOW SERIES
15
4.0
2.5
2.0
1.5
0.5
RELATIVE LUMINOUS INTENSITY
2053 53010 25
3.0
IF - FORWARD CURRENT PER SEGMENT - mA
0
1.0
3.5
40
0
For a Detailed Explanation on the Use of Data Sheet Information and Recommended Soldering Procedures,
See Application Note 1005.
Electrical/Optical
These versatile bar graph arrays are composed of ten
light emitting diodes. The light from each LED is opti-
cally stretched to form individual elements. The AlGaAs
Red (HLCP-J100) bar graph array LEDs use double het-
erojunction AlGaAs on a GaAs substrate. HER (HDSP-
4830) and Yellow (HDSP-4840) bar graph array LEDs
use a GaAsP epitaxial layer on a GaP substrate. Green
(HDSP-4850) bar graph array LEDs use liquid phase GaP
epitaxial layer on a GaP substrate. The multicolor bar
graph arrays (HDSP-4832/4836) have HER, Yellow, and
Green LEDs in one package. These displays are designed
for strobed operation. The typical forward voltage values
can be scaled from Figures 5 and 11. These values should
be used to calculate the current limiting resistor value
and typical power consumption. Expected maximum VF
values for driver circuit design and maximum power dis-
sipation may be calculated using the VFMAX models:
AlGaAs Red HLCP-J100 series
VFMAX = 1.8 V + IPeak (20 Ω)
For: IPeak ≤ 20 mA
VFMAX = 2.0 V + IPeak (10 Ω)
For: IPeak ≥ 20 mA
HER (HDSP-4830) and Yellow
(HDSP-4840) series
VFMAX = 1.6 + IPeak (45 Ω)
For: 5 mA ≤ IPeak ≤ 20 mA
VFMAX = 1.75 + IPeak (38 Ω)
For: IPeak ≥ 20 mA
Green (HDSP-4850) series
VFMAX = 2.0 + IPeak (50 Ω)
For: IPeak > 5 mA
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. Obsoletes AV01-0277EN
AV02-1798EN - October 9, 2015
Figures 4 and 10 allow the designer to calculate the lu-
minous intensity at dierent peak and average currents.
The following equation calculates intensity at dierent
peak and average currents:
IVAVG = (IFAVG/IFAVG DATA
SHEET)ηpeak)(IVDATA SHEET)
Where:
IVAVG is the calculated time averaged luminous inten-
sity resulting from IFAVG.
IFAVG is the desired time averaged LED current.
IFAVG DATA SHEET is the data sheet test current for
IVDATA SHEET.
ηpeak is the relative eciency at the peak current,
scaled from Figure 4 or 10.
IV DATA SHEET is the data sheet luminous intensity,
resulting from IFAVG DATA SHEET.
For example, what is the luminous intensity of an HDSP-
4830 driven at 50 mA peak 1/5 duty factor?
IFAVG = (50 mA) (0.2) = 10 mA
IFAVG DATA SHEET = 10 mA
ηpeak = 1.3
IV DATA SHEET = 3500 mcd
Therefore
IVAVG = (10 mA/10 mA) (1.3) (3500 mcd) = 4550 mcd