DUO-TYNE Flag Connectors AMP Card Edge Connectors (Board-to-Board, Wire-to-Board) Catalog 82619 Revised 8-96 Product Facts m Right angle design permits cabling in close quarters wa Recessed contacts prevent arcing m Sizes and configurations available with or without mounting ears m Lowest installed costs achieved through high- speed compression crimp- ing with AMP matched tooling w Meets quality and reliability requirements for appliance controls, vending machine subassemblies and business machines a Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 SA\ wp Certified by Canadian Standards Association R File No. LR 7189 *Consult AMP engineering when paralleling contacts for power applications. Dimensions are shown for reference purposes only. Customer drawings are available upon request. DUO-TYNE Flag Connectors This flag-type connector is designed to meet the quali- ty and reliability of such equipment as appliance controls, vending machine subassemblies, television, stereo, business machines and other applications with similar control needs. Among its assembly-saving features is a right-angle design which permits cabling in close quarters, where it does not require frame mounting to attach Dimensions are in inches and millimeters unless specified otherwise. Values in brackets are metric equivalents. Chart dimensions are in inches over millimeters. the keyed housing to the card cutout and double locking of the contacts when a PC board is inserted. In addition, con- tacts are recessed to pre- vent arcing. All sizes and configurations are available with or without mounting ears. Added to low initial cost, lowest installed costs are achieved through high- speed compression crimp- ing with AMP matched tooling. EE For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product information Center: 1-800-522-6752. Performance Specifications Contact Rating": 5 amperes High Potential: 2200 VAC, rms Operating Temperature: 40C to +105C Vibration: 10 to 55 cps per MIL-STD-1344, Method 202 Specifications subject to change. Consutt AMP for latest specifications. Card Edge Connectors Catalog 82619 AWM - (Board-to-Board, Wire-to-Board) Revised 8-96 DUO-TYNE Flag Connectors (Continued) Tapered Beam Crimp, Snap-In Contacts Material and Finish: Beryllium copper or phosphor bronze (see chart) plated as follows: Plating A.000030 [0.00076] gold in mating area, with entire contact under- plated .000050 [0.00127] nickel Plating B.000015 [0.00127] gold in mating area, with entire contact under- plated .000050 [0.00127] nickel Plating C.000150 [0.00381] tin Related Product Data: ifications Wire Size R i Contact = Contact Part Numb Applicator tor Performance Specifications e Range Insulation saaterial Finish on : art um Ors AMP-D-LECTRIC Hand Teo! page 158 AWG mm2__ Dia. Range (Plating) Loose Piece Strip Form Machine" Connector Housingspage 160 : " 035-055 Beryllium ; " ; : Application Tooling pages 165, 166 26-22 01204 paeyag A 530005-3 30004-6 466586-2 0094-4 Copper Phosphor c = 530002-5 P| . Bronze A 530003-2 530002-3 Technical Documents 22-18 03-09 ee eg Cc 530006-5 4664242 90027-4 20 (pages 172, 173): EE Beryllium A 530006-6 ss te gs Copper _ 3 o AMP Product Specification B 530007-3 4 108-9038 1816 0814 990-130 Phosphor 530505-5 466413-2 sz AMP Application Specification <_< am 114-9002 Applicators are for Model K machines. Consult AMP for applicators for other bench machines and lead-making = AMP Instruction Sheets 408-7047, machines. < 408-7780, 408-7848, 408-7849 AMP Crimp Inspection Sheet Cl 8050-11 . Contact Extraction Tool Hand Crimping Tool 810992-1 Dimensions are shown for reference purposes Dimensions are in inches and millimeters For drawings. technical data or samples. Specifications subject to change. anly. Customer drawings are available upon unless specified otherwise. Values in brackets contact your AMP sales engineer or call Consult AMP for latest specifications. request. are metric equivalents. Chart dimensions are the AMP Product Information Genter: in inches over millimeters. 1-800-522-6752. Connectors DUO-TYNE Flag 160 AMP Card Edge Connectors Catalog 82619 (Board-to-Board, Wire-to-Board) Revised 8-96 DUO-TYNE Flag Connectors (Continued) Housings, With and Without Mounting Ears 100 Material: Natural nylon (2.54 Related Product Data: TEC ae cop Performance Specifications _ Apa ale - t page 158 mr aS Contaetspage 159 PC Board Layoutpage 161 Technical Documents be (pages 172, 173): | l AMP Product Specification 108-9038 t AMP Application Specification 590 _ 114-9002 [14.99] { AMP Instruction Sheet 408-7047 | Fit for .055-.070 [1.40-1.78] | On-Contact Keying Plug PC Board 240 _ _ | | [6.10] Material: Nylon . .190 ~~ [4.83 _-+_~ D -______ Part Number 583661-1 Technical Documents (pages 172, 173): Part Numbers AMP Instruction Sheet 408-7486 No. Dimensions With Mounting Ears _ Without Mounting Ears ot For ins. For Ins. For Ins. For Ins. Pos. A B c D Dia. Range Dia. Range Dia. Range Dia. Range .035-. .090-.1 .035-, .090-.130 [0.89-2.29] [2.29-3.30] [0.89-2.29] _ [2.29-3.30] 1.384 414 624 1.004 3 35.15 10.52 15.85 25 50 582380-9 = 582374-9 530853-1 1.852 882 1.092 1.472 6 47.04 32.40 27.74 37.39 582382-9 _ 582371-9 530853-3 2.320 1.350 1.560 1.940 9 58.93 34.29 39-62 49.28 582383-9 530509-2 582375-9 ~ 2.788 1.818 2.028 2.408 12 70.82 46.18 5151 61.16 582384-9 530509-6 582376-9 3.100 2.130 2.340 2.720 1478.74 54.10 59.44 69.09 582385-9 _ _ 3.256 2.286 2.496 2.876 15 32.70 58.06 63.40 73.05 582386-9 _ 582377-9 3.724 2.754 2.964 3.344 18 94.59 69.95 55 29 34.94 582387-9 530509-8 582378-9 530853-8 4.348 3.378 3.588 3.968 22 110.44 85.80 3114 160.79 582388-9 530509-9 _ 530853-9 Note: Other connector sizes can be made available, consult AMP. es Dimensions are shown for reference purposes Dimensions are in inches and millimeters For drawings, technical data or samples, Specifications subject to change. only. Customer drawings are available upon unless specified otherwise. Values in brackets contact your AMP sales engineer or call Consult AMP for latest specifications. request. are metric equivalents. Chart dimensions are the AMP Product information Center: in inches over millimeters. 1-800-522-6752. Card Edge Connectors ANP (Board-to-Board, Wire-to-Board) Catalog 82619 Revised 8-96 DUO-TYNE Flag Connectors (Continuec) Recommended PC Board Layouts Related PC Board Data: Recommended Board Thickness .055-.070 {1.40-1.78] Recommended Chamfer of Mating Edge of Boards.015 [0.38] x 45 062 san] Recommended Pad PlatingTin tt. .000150-.000400 [0.00381 -0.01016] { thick 1 Ato 014/.016 [20.08] ~ (0.36 0.41] _ .044 2.005 [1.12 #0 13] __| a -156 .005 | [3.96 20.13] .280 +.008 [7.11 29-13] Contact Pads \ 148 [3.76] R. Contact Pads Retaining Dimples (Optional) 115 ng 4.003 .070 2.005 oo fea3) Mi | P Ajo >| fp 7930 19 ss : = ' a oz . am . : mn ry 2 No. of Dimension Positions A 400 3 10.16 -868 6 22.05 9 1.337 33.96 1.805 12 45.85 2.117 14 53.77 2.272 15 57,71 2.741 18 69.62 3.365 22 85.47 Dimensions are in inches and millimeters unless specified otherwise. Values in brackets are metric equivalents. Ghart dimensions are in inches over millimeters. Dimensions are shown for reference purposes only. Customer drawings are available upan request. For drawings, technical data or samptes, contact your AMP sales engineer or call the AMP Product Information Center: 1-800-522-6752. Specifications subject to change. Consult AMP for Jatest specifications.